Insight into the sorption and desorption pattern of pyrrolizidine alkaloids and their N-oxides in acidic tea (Camellia sinensis) plantation soils.

Pyrrolizidine alkaloids (PAs) and their N-oxides (PANOs) are phytotoxins produced by various plant species and have been emerged as environmental pollutants. The sorption/desorption behaviors of PAs/PANOs in soil are crucial due to the horizontal transfer of these natural products from PA-producing plants to soil and subsequently absorbed by plant roots. This study firstly investigated the sorption/desorption behaviors of PAs/PANOs in tea plantation soils with distinct characteristics. Sorption amounts for seneciphylline (Sp) and seneciphylline-N-oxide (SpNO) in three acidic soils ranged from 2.9 to 5.9 µg/g and 1.7 to 2.8 µg/g, respectively. Desorption percentages for Sp and SpNO were from 22.2% to 30.5% and 36.1% to 43.9%. In the mixed PAs/PANOs systems, stronger sorption of PAs over PANOs was occurred in tested soils. Additionally, the Freundlich models more precisely described the sorption/desorption isotherms. Cation exchange capacity, sand content and total nitrogen were identified as major influencing factors by linear regression models. Overall, the soils exhibiting higher sorption capacities for compounds with greater hydrophobicity. PANOs were more likely to migrate within soils and be absorbed by tea plants. It contributes to the understanding of environmental fate of PAs/PANOs in tea plantations and provides basic data and clues for the development of PAs/PANOs reduction technology.

Local and systemic effects of microplastic particles through cell damage, release of chemicals and drugs, dysbiosis, and interference with the absorption of nutrients.

Microplastic particles (MPs) have been detected in a variety of environmental samples, including soil, water, food, and air. Cellular studies and animal exposures reported that exposure to MPs composed of different polymers might result in adverse effects at the portal of entry (local) or throughout the body (systemic). The most relevant routes of particle uptake into the body are oral and respiratory exposure. This review describes the various processes that may contribute to the adverse effects of MPs. Only MPs up to 5 µm were found to cross epithelial barriers to a significant extent. However, MPs may also exert a detrimental impact on human health by acting at the epithelial barrier and within the lumen of the orogastrointestinal and respiratory tract. The potential for adverse effects on human health resulting from the leaching, sorption, and desorption of chemicals, as well as the impact of MPs on nutritional status and dysbiosis, are reviewed. In vitro models are suggested as a means of (1) assessing permeation, (2) determining adverse effects on cells of the epithelial barrier, (3) examining influence of digestive fluids on leaching, desorption, and particle properties, and (4) role of microbiota-epithelial cell interactions. The contribution of these mechanisms to human health depends upon exposure levels, which unfortunately have been estimated very differently.

Exploring the sorption/desorption of nitenpyram in loess soils: implications for neonicotinoid fate and ecological risk assessment.

Neonicotinoids are widely used insecticides that accumulate in various environmental matrixes and potentially harm non-target organisms. However, the mechanism of sorption/desorption of neonicotinoids in different loess soils remains poorly understood. Therefore, this study investigated the sorption/desorption of nitenpyram (NIT), a commonly used neonicotinoid, in three different types of loess soils and examined factors influencing the adsorption process using batch experiments. The findings revealed that NIT reached adsorption equilibrium in 4 h in all three loess soil samples. The R2 value (> 0.898) obtained from fitting the sorption/desorption kinetics indicated a good match with the pseudo-second-order model, suggesting the involvement of multiple mechanisms, including chemisorption. The linear and Freundlich models also adequately described the sorption of NIT in loess soils. Additionally, a clear hysteresis phenomenon was observed. The adsorption capacity of NIT is significantly related to the adsorption temperature, solution pH and ionic strength. Upon increasing the initial concentration, the equilibrium adsorption capacity of NIT for gray-cinnamon soil, sierozem, and cultivated loessial soil increased from 3.56, 2.51, and 2.64 mg/kg to 8.49, 3.92, and 5.22 mg/kg, respectively. FTIR spectral analysis revealed that the adsorption of NIT in loess soil was primarily governed by mixed mechanism. This study elucidates the behavior and fate of NIT in soil-water systems in the Northwest, while also establishing a foundation for assessing its ecological risks. The findings have significant practical implications for the future development of environmental management and pollution control strategies.

Ensemble surrogate modeling of advective-dispersive transport with intraparticle diffusion model for column-leaching test.

Column-leaching tests are a common approach for assessing the leaching behavior and resulting environmental risks of contaminated soils and waste materials, which are frequently reused for various construction purposes. The observed breakthrough curves of the contaminants are influenced by the complex dynamics of solute transport and kinetic inter-phase mass transfer. Disentangling these interactions necessitates numerical models. However, inverse modeling and sensitivity analysis can be time-consuming, especially when sorption kinetics are explicitly described by intraparticle diffusion, which requires discretizing the domain both in the flow direction along the column axis and inside the grains. To circumvent the need for such computationally intensive models, we have developed two different ensemble surrogate models. These models employ two separate ensemble methods: random forest stacking and inverse-distance weighted interpolation. Each method is applied to base surrogate models that cover different parts of the parameter space. The base surrogate models use the method of Extremely randomized Trees (ExtraTrees). The defined parameter range is based on the German standard for column-leaching tests. To optimize the base surrogate models, we utilized adaptive-sampling methods based on three distinct infill criteria: maximizing the expected improvement, staying within a certain Mahalanobis distance to the best estimate (both for exploitation), and maximizing the standard deviation (for exploration). The ensemble surrogate model demonstrates excellent performance in emulating the behavior of the original numerical model, with a relative root mean squared error of 0.09. We applied our proposed ensemble surrogate model to estimate the complete posterior parameter distribution using Simulation-Based Inference, specifically Neural Posterior Estimation, to determine the full parameter distribution conditioned on copper-leaching data from two different soils. Samples drawn from the posterior distribution align perfectly with the observed data for both the surrogate and original models.

Antimicrobial gelatin-based films with cinnamaldehyde and ZnO nanoparticles for sustainable food packaging.

Cinnamaldehyde (CIN), a harmless bioactive chemical, is used in bio-based packaging films for its antibacterial and antioxidant properties. However, high amounts can change food flavor and odor. Thus, ZnO nanoparticles (NPs) as a supplementary antimicrobial agent are added to gelatin film with CIN. The CIN/ZnO interactions are the main topic of this investigation. FTIR-Attenuated Total Reflection (ATR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were utilized to investigate CIN/ZnO@gelatin films. Transmission electron microscope (TEM) images revealed nanospheres morphology of ZnO NPs, with particle sizes ranging from 12 to 22 nm. ZnO NPs integration increased the overall activation energy of CIN/ZnO@gelatin by 11.94%. The incorporation of ZnO NPs into the CIN@gelatin film significantly reduced water vapour permeability (WVP) of the CIN/ZnO@gelatin film by 12.07% and the oxygen permeability (OP) by 86.86%. The water sorption isotherms of CIN/ZnO@gelatin were described using Guggenheim-Anderson-de Boer (GAB) model. The incorporation of ZnO NPs into the CIN@gelatin film reduced monolayer moisture content (M0) by 35.79% and significantly decreased the solubility of CIN/ZnO@gelatin by 15.15%. The inclusion of ZnO into CIN@gelatin film significantly decreased tensile strength of CIN/ZnO@gelatin by 13.32% and Young`s modulus by 18.33% and enhanced elongation at break by 11.27%. The incorporation of ZnO NPs into the CIN@gelatin film caused a significant decrease of antioxidant activity of CIN/ZnO@gelatin film by 9.09%. The most susceptible organisms to the CIN/ZnO@gelatin film included Candida albicans, Helicobacter pylori, and Micrococcus leutus. The inhibition zone produced by the CIN/ZnO@gelatin film versus Micrococcus leutus was 25.0 mm, which was comparable to the inhibition zone created by antibacterial gentamicin (23.33 mm) and cell viability assessment revealed that ZnO/CIN@gelatin (96.8 ± 0.1%) showed great performance as potent biocompatible active packaging material.

Structural Features, Chemical Diversity, and Physical Properties of Microporous Sodalite-Type Materials: A Review.

This review contains data on a wide class of microporous materials with frameworks belonging to the sodalite topological type. Various methods for the synthesis of these materials, their structural and crystal chemical features, as well as physical and chemical properties are discussed. Specific properties of sodalite-related materials make it possible to consider they as thermally stable ionic conductors, catalysts and catalyst carriers, sorbents, ion exchangers for water purification, matrices for the immobilization of radionuclides and heavy metals, hydrogen and methane storage, and stabilization of chromophores and phosphors. It has been shown that the diversity of properties of sodalite-type materials is associated with the chemical diversity of their frameworks and extra-framework components, as well as with the high elasticity of the framework.

Oil Sorption Properties of Centrifugally Spun Polyisobutylene-Based Thermoplastic Elastomer Microfibers.

Fiber-based sorbent materials are an essential part of containing oil spills, thus preventing ecological damage. Poly(styrene-b-isobutylene-b-styrene) thermoplastic elastomer fibers were successfully produced by centrifugal spinning. Scanning electron microscopy revealed that the fibers were bead free and smooth-surfaced, with an average fiber diameter of 5.9 ± 2.3 µm. Contact angle measurements proved the highly hydrophobic (water contact angle of 126.8 ± 6.4°) and highly oleophilic nature of the fiber mat. The sorption and retention capacities of the fiber mat were tested for various oils and benchmarked against polypropylene as the industry standard and polystyrene, which is widely used in the literature. The oil uptake of the fiber mat showed a strong correlation with the viscosity of the oil, resulting in sorption capacities of 10.1 ± 0.8 g/g for sunflower oil, 19.9 ± 2.1 g/g for motor oil, and 23.8 ± 1.8 g/g for gear oil. Oil-water separation tests were also conducted, resulting in ~100% oil removal. The thermoplastic elastomer fiber mat outperformed the industry standard; however, the polystyrene fiber mat demonstrated the best oil sorption performance.

Opacification Kinetics of PLA during Liquid Water Sorption.

When in contact with water, poly(lactic acid), PLA, undergoes several physical changes. A very evident one is opacification, namely the change from the typical transparent appearance to a white opaque color. This phenomenon is particularly significant for many applications, including packaging, since opacity hinders the possibility of a clear look of the packed goods and also worsens the consumers' perceptions. In this work, we report an analysis of the time evolution of the phenomenon in different conditions of temperature and water concentration. The results allow us to define a time-scale of the phenomenon and to put it in relationship with the temperature and water content inside the material. In particular, opacification proceeds from the outer surface of the specimens toward the center. Both craze formation due to hydrolysis and crystallization contribute to the opacification phenomenon. Opacification becomes faster as temperature increases, whereas the increase in the solution density has the opposite effect. A model for describing the evolution of opacification was proposed and found to be consistent with the experimental data.

Smart Hydrogel Based on Derivatives of Natural α-Amino Acids for Efficient Removal of Metal Ions from Wastewater.

A novel class of hydrogels, rich in a variety of functional groups capable of interacting/complexing with metal ions was successfully synthesized. This was achieved by using acryloyl derivatives of natural α-amino acids, specifically ornithine and cystine. The δ-amino group of ornithine was modified with an acryloyl group to facilitate its attachment to the polymer chain. Additionally, N,N'-bisacryloylcystine, derived from cystine, was employed as the cross-linker. The hydrogel was obtained through a process of free radical polymerization. This hydrogel, composed only from derivatives of natural amino acids, has proven to be a competitive sorbent and has been effectively used to remove heavy metal pollutants, mainly lead, copper, and silver ions, from aqueous media. The maximum sorption capacities were ca. 155 mg·g-1, 90 mg·g-1, and 215 mg·g-1, respectively for Pb(II), Cu(II), and Ag(I). The material was characterized by effective regeneration, maintaining the sorption capacity at around 80%, 85%, and 90% for Cu(II), Ag(I), and Pb(II), respectively, even after five cycles. The properties of sorption materials, such as sorption kinetics and the effect of pH on sorption, as well as the influence of the concentration of the examined metal ions on the swelling ratio and morphology of the gel, were investigated. The EDS technique was employed to investigate the composition and element distribution in the dry gel samples. Additionally, IR spectroscopy was used to identify the functional groups responsible for binding the studied metal ions, providing insights into their specific interactions with the hydrogel.

Role of micropores within minerals in retardation of mass transfer by matrix diffusion and sorption in granitic rock.

Understanding the mass transfer characteristics of matrix diffusion and sorption is important in the safety assessment of geological disposal of high-level radioactive waste in crystalline rock (granite) by contributing to radionuclide retardation through mass transfer within the rock body. We present a comparative discussion of the effective diffusion coefficient (De), porosity, and petrological data for rock samples collected from the Toki Granite in central Japan, to evaluate the role of micropores within minerals in retardation by matrix diffusion and sorption in granitic rocks. De was derived from the through-diffusion experiments using uranine, barium, strontium, and chloride ions as tracers. Petrological data consist of the fracture frequency, the extent of hydrothermal alteration in the minerals, the micropore volume in the minerals, and the three-dimensional modal mineralogy (mineral assemblage and ratio) for the target rock samples. The relationship between the De, porosity, and petrological data has the following implications: 1) Micropores in minerals related to the alteration act as 'storage pores' that contribute to retardation due to matrix diffusion and sorption; 2) Once the uranine, cations (Ba2+ and Rb+), and anion (Cl-) penetrate the micropores in the minerals through matrix diffusion, the cations are sorbed on the micropore surfaces, whereas the uranine and conservative chloride anion is trapped at the end of the micropore network, resulting in retardation; 3) Regions with a high fracture frequency are associated with not only active advection-dispersion through fractures, but also retardation due to matrix diffusion and sorption; 4) The grain-boundary pores between colorless minerals act as 'transport pores' owing to matrix diffusion, and the retardation within grain-boundary pores is less than that within micropores in minerals.

Iota-carrageenan as a regenerating system for Eu3+ recovery: adsorption/desorption cycles.

Renewable and biodegradable polysaccharides attract attention as environmentally friendly adsorbents for the removal of heavy metals from wastewater. One such group, is carrageenan, of which were recently successfully employed to adsorb representative lanthanide and actinide ions. Herein, iota-carrageenan-based hydrogels were used to adsorb europium ions (Eu3+) from water solutions, followed by desorption of the ions from the hydrogel beads and recycling of the beads three times. It was found that sorption yields from a 500 mg/L Eu3+ ion solution with beads that were prepared with 1 or 2 wt/v% aqueous solution of iota-carrageenan with CaCl2 (0.5 M) reached maximum sorption yield of 50% and 65%, correspondingly, after 1 h. In addition, the sorption kinetics followed the pseudo second-order model controlled by chemisorption. Desorption yields in the first cycle using NaNO3 (1 M) with both preparations were 57% and 74%, respectively. The sorption yields increased during the second and third cycles and were efficient in the overall pH range. Cryo-SEM, SEM, SEM-EDS and TGA analyses verified the adsorption and desorption of Eu3+ ions to and from the iota beads and that the Ca2+ ions that initially crosslinked the hydrogel were replaced during the cycles by Eu3+ or Na+ ions. In addition, the beads were stable and easily reusable for several sorption/desorption cycles. Furthermore, after sorption, the beads were characterised by a porous structure, such that beads prepared with a 2 wt/v% aqueous solution of iota-carrageenan yielded a more porous, ordered structure, and after desorption, the bead textures became even more porous.

A key factor in monitoring cannabis consumption trends through wastewater analysis: Partitioning of THCCOOH between the liquid and solid phase of influent wastewater.

Current wastewater-based epidemiology (WBE) studies are predominantly focused on the analysis of urinary biomarkers present in the liquid phase of influent wastewater (IWW). This approach systematically underestimates less polar metabolites, such as cannabis biomarkers. These biomarkers can potentially sorb to and desorb from suspended particulate matter (SPM) present in IWW. This study investigates the bidirectional partitioning of THCCOOH between the liquid phase and SPM of IWW by performing multiple sorption experiments using THCCOOH-D9 as a surrogate due to the unavailability of blank SPM and blank IWW. In addition, this study involves the analysis of IWW collected from eight wastewater treatment plants (WWTP) (n = 56) across four European countries, where raw IWW, the liquid phase and SPM were separately analysed to identify potential trends in the fraction of THCCOOH in the SPM between and withing the examined locations. Based on the performed sorption experiments, bidirectional partitioning of THCCOOH between the liquid phase and SPM was noted, showing partition between both phases when only one of the two phases was spiked. It was illustrated that the concentration of SPM had a notable influence on the THCCOOH partitioning between both phases. In addition to the inter location variability (average THCCOOH present in the SPM ranged 31-59 %), a substantial intra location variation was also observed, e.g., in one location ranged 17-58 %. While the determination of a correction factor for the amount of THCCOOH present in SPM would be ideal, this is challenging, since the amount of SPM is not fixed in all IWW samples. Although SPM has influence on the THCCOOH partition, no correlation (p value Spearman correlation = 0.3160) was observed between the SPM concentration and the fraction of THCCOOH in the solid phase. Moreover, the collection of homogenized samples is difficult, and the time required to reach an equilibration in partitioning of THCCOOH between both IWW phases remains unclear. Due to i) the large inter-and intra-location variation of THCCOOH present in the SPM, ii) the variability in SPM concentration in IWW samples, and iii) the time required to reach a partitioning equilibration, an analytical procedure based on liquid-liquid extraction (LLE) that considers both the liquid phase and SPM of IWW is recommended to reduce the overall uncertainty for THCCOOH measurement in IWW. It was illustrated that this extraction method is capable to recover the total concentration of THCCOOH in both phases.

Bentonite clay reinforced alginate grafted composite hydrogel with remarkable sorptive performance toward removal of methylene green.

The rapid industrial progress in today's world has led to an alarming increase in water pollution caused by various contaminants such as synthetic dyes. To address this issue, a new hydrogel sorbent, BC-r-Na-Alg-g-p(NIPAm-co-AAc), was developed by combining bentonite clay, sodium alginate, and poly(N-isopropyl acrylamide-co-acrylic acid) through one-pot free radical polymerization at 60 °C. The developed sorbent was characterized using several analytical techniques including SEM, FTIR, TGA, UTM, and swelling studies. The swelling capacity of the sorbent was observed to increase remarkably with an increase in pH, reaching a maximum of 9664 % at pH 11. In batch mode sorption experiments, the sorbent's performance toward methylene green (MG) was investigated by analysing the effects of contact time, pH, temperature, and concentration. The experimental data were fitted to pseudo-second-order kinetic and Langmuir isotherm models, indicating chemisorption as the dominant interaction mode between the anionic sorbent and cationic MG. However, physisorption may also occur to a lesser extent, indicated by the significant R2 of the pseudo-first-order kinetic and Freundlich isotherm models. Additionally, the sorbent exhibited very little decrease (approximately 5 %) in sorptive performance for six sorption-desorption cycles. Overall, the facile fabrication, excellent swelling (9664 %), promising sorption performance (2573 mg.g-1), and good recyclability (6 cycles) make the developed sorbent a potential candidate for various industrial applications.

Benzotriazole ultraviolet stabilizers in the environment: A review of occurrence, partitioning and transformation.

Benzotriazole ultraviolet stabilizers (BUVSs) are widely used as industrial additives to protect products from photoaging and are present in a variety of environmental matrices and organisms. It raised significant concerns that BUVSs are emerging pollutants with persistence, bioaccumulation and toxicity, of which 2-(3, 5-di-tert-amyl-2-hydroxyphenyl) benzotriazole (UV-328) has been recently listed in Annex A of the Stockholm Convention Persistent Organic Pollutants (POPs) list. A comprehensive understanding of the occurrence, partitioning and transformation of BUVSs in the environment is the basis for their environmental exposure and risk studies. However, the occurrence, partitioning and transformation of BUVSs are scarcely reviewed. In this paper, the environmental occurrence of BUVSs in various matrices, including water-suspended particulate matter and sediment, soil and dust, sludge, as well as biota, were summarized. Solid matrices and organisms are predominant reservoirs for BUVSs rather than waters, but there is a lack of systematical summary on the sorption/partitioning studies of BUVSs in abiotic phases and organisms. This paper analyzed and reviewed the possible sorption/partitioning processes and mechanisms. It was found that the partitioning is dependent on the hydrophobicity of BUVSs, environmental conditions and the organic carbon contents, and the bioaccumulation is also biota-species dependent. To further assess the potential risks of BUVSs, more progress has been made in the study of transformation of BUVSs. Focusing on the most important transformation processes in the environment, involving photodegradation, chemical degradation, biodegradation and metabolism in biota, the probable transformation pathways and mechanisms of BUVSs were summarized. It was emphasized that the hydrophobicity and toxicity of metabolites should not be overlooked. Finally, the future research direction was prospected from contaminant remediation and health risk perspectives. This paper provides fundamental knowledge of the environmental behavior of BUVSs, and will facilitate the research of environmental exposure and risk assessment of BUVSs.

Shopping around: Comparing Cd(II) sorption performance of disparate functional groups-modified microcrystalline cellulose composites.

The structure-function relationship of functionalized microcrystalline cellulose (MCC) composites as adsorbents remains unclear. Herein, the orange peel-derived MCC (i.e., OP-OH-H-25) was treated by different functional agents to prepare adsorbents for cadmium (Cd(II)) removal. Mercaptoacetic acid and orthophosphoric acid did not apparently impact MCC's surface site types and contents. Alternatively, they efficiently purified OP-OH-H-25 and generated OP-OH-SH and OP-OH-P samples with increased cellulose amounts. In contrast, the glycine modification produced OP-OH-NH2 with fewer sulfhydryl/carboxyl functional groups and more amide/amino sites. The pH-dependent Cd(II) removal trends by the MCC-related materials showed three successive stages with disparate sorption modes. The Cd(II) sorption kinetics processes on OP-OH-SH, OP-OH-P, and OP-OH-NH2 reached equilibrium after 0.25 h, faster than 0.5 h on OP-OH-H-25. The maximum Cd(II) sorption capacities of MCC-related adsorbents were OP-OH-P (151.81 mg/g) > OP-OH-SH (150.80 mg/g) > OP-OH-H-25 (124.90 mg/g) > > OP-OH-NH2 (55.23 mg/g). OP-OH-P exhibited the strongest Cd(II) sorption ability under the interference of mixed aquatic components. The intrinsic Cd(II) sorption mechanisms were identified as inner-sphere complexation and cation-π bond interaction. Overall, the select priority of modifying agents is orthophosphoric acid > mercaptoacetic acid > > glycine when preparing functionalized MCC adsorbents for purifying Cd(II)-polluted water systems.

Tailoring the structural and physicochemical properties of rice straw cellulose-based cryogels by cell-mediated polyhydroxyalkanoate deposition.

This study presents a novel biotechnological approach for creating water vapor-resistant cryogels with improved integrity. Rice straw cellulose was transformed into nanofibrils through TEMPO-mediated oxidation and high-pressure homogenization. The resulting cryogels remained firm even when immersed in aqueous media, whose pores were used by live cell to deposit polyhydroxyalkanoate (PHA) particles inside them. This novel method allowed the compatibilization of PHA within the cellulosic fibers. As a consequence, the water sorption capacity was decreased by up to 6 times having just 4 % of PHA compared to untreated cryogels, preserving the cryogel density and elasticity. Additionally, this technique can be adapted to various bacterial strains and PHA types, allowing for further optimization. It was demonstrated that the amount and type of PHA (medium chain length and small chain length-PHA) used affects the properties for the cryogels, especially the water vapor sorption behavior and the compressive strength. Compared to traditional coating methods, this cell-mediated approach not only allows to distribute PHA on the surface of the cryogel, but also ensures polymer penetration throughout the cryogel due to bacterial self-movement. This study opens doors for creating cryogels with tunable water vapor sorption and other additional functionalities through the use of specialized PHA variants.

Datasets on the production routes and the properties of plant powders for manufacturing of green products.

The diversity of the plant biomass available on earth makes plants an exceptional resource for replacing fossil resources in green chemistry, bioenergy and biobased materials. For numerous applications, and especially the high-tech ones (building block molecules, high-power bioenergy, additive manufacturing of biobased materials), the macrostructure assemblies of the plant biomass often need to be first broken down into a fine powder. This can be achieved by dry fractionation process combining comminution and sorting steps. The chemical and physical properties of the ground plant powder results both from the process conditions, the histological structure and chemical composition of the raw plant materials. In a forward engineering approach, the quality of the final products can be highly improved by the selection of the right powder (raw materials and production process) for the right application. This article provides production routes together with physical and chemical characterization of 10 biomass powders from 6 different biomass feedstocks (SP - spirulina, HI - hibiscus, PB - pine bark, HC - hemp Core, RH - rice husk and RHA - rice husk ash). These feedstocks represent a broad range of raw materials properties. For pine bark, hemp core, rice husk and rice husk ash, two grades of powders related to two different particle sizes were produced by two different routes to highlight the impact of the comminution process on the powder properties. The devices used and the process parameters are described. The morphological properties of the powder were quantified using laser diffraction (particle size) and image analysis (shape factor) and qualitatively analyzed with SEM. The specific surface area was determined using gas sorption with BET theory, and the hygroscopic properties were measured using direct vapor sorption. The chemical characterizations were determined with a set of biochemical assays and, complementary, FTIR and fluorescence spectra were recorded to provide fingerprints of samples. The dataset includes tables that summarize the main characteristic descriptors of each analysis as well as the raw data. The data are registered in the French Research Data Gouv public repository and also stored in the PO2 BaGaTel database using the PO2/TransformON ontology [1]. SPO2Q web tool allows on line querying of the database, which can also be consulted using PO2 manager desktop application [[1], [2], [3]].

Kinetics and sorption behavior of glyphosate and tricyclazole for their efficient retention in biomixtures.

The present investigation aims to study adsorption-desorption behavior of glyphosate and tricyclazole in rice straw-compost biomixtures. To enhance pesticide adsorption and performance of the bio-purification system, rice straw-compost (BM) biomixture was mixed with wheat straw biochar (WBC, 1% and 5%), and adsorption of both pesticides in control (BM) and WBCBM(1%) and WBCBM(5%) biomixtures was compared. The kinetics study suggested that the pseudo-second-order model best explained the time-dependent adsorption of both pesticides and intraparticle adsorption was not the rate-determining step. Tricyclazole was more sorbed than glyphosate in all biomixtures which can be attributed to its lower water solubility. The WBC increased the sorption of both pesticides, but the effect varied with the nature of pesticides and biochar content. The adsorption coefficient values in BM, WBCBM(1%), and WBCBM(5%) biomixtures were 26.74, 38.16, and 51.97 (glyphosate) and 38.07, 59.94, and 84.54 (tricyclazole), respectively. The adsorption data was subjected to the Freundlich, the Langmuir, and the Temkin isotherms, and among them, the Freundlich isotherm best explained pesticide adsorption behavior. Desorption results suggested that the adsorption of glyphosate was more irreversible than tricyclazole and depended upon initial pesticide concentration. This study suggested that biochar mixed rice straw-compost biomixtures can be exploited in bio-purification systems for glyphosate and tricyclazole.

Understanding the Selective Removal of Perfluoroalkyl and Polyfluoroalkyl Substances via Fluorine-Fluorine Interactions: A Critical Review.

As regulatory standards for per- and polyfluoroalkyl substances (PFAS) become increasingly stringent, innovative water treatment technologies are urgently demanded for effective PFAS removal. Reported sorbents often exhibit limited affinity for PFAS and are frequently hindered by competitive background substances. Recently, fluorinated sorbents (abbreviated as fluorosorbents) have emerged as a potent solution by leveraging fluorine-fluorine (F···F) interactions to enhance selectivity and efficiency in PFAS removal. This review delves into the designs and applications of fluorosorbents, emphasizing how F···F interactions improve PFAS binding affinity. Specifically, the existence of F···F interactions results in removal efficiencies orders of magnitude higher than other counterpart sorbents, particularly under competitive conditions. Furthermore, we provide a detailed analysis of the fundamental principles underlying F···F interactions and elucidate their synergistic effects with other sorption forces, which contribute to the enhanced efficacy and selectivity. Subsequently, we examine various fluorosorbents and their synthesis and fluorination techniques, underscore the importance of accurately characterizing F···F interactions through advanced analytical methods, and emphasize the significance of this interaction in developing selective sorbents. Finally, we discuss challenges and opportunities associated with employing advanced techniques to guide the design of selective sorbents and advocate for further research in the development of sustainable and cost-effective treatment technologies leveraging F···F interactions.

Hybrid Passive Cooling for Power Equipment Enabled by Metal-Organic Framework.

While providing electrical energy for human society, power equipment also consumes electricity and generate heat. Cooling equipment consumes a significant amount of electricity, further increasing energy consumption and load on the power grid. Therefore, there is an urgent need to develop low-energy and sustainable cooling technologies for power equipment. In this study, a hybrid passive cooling composite designed to enhance heat dissipation for heavy-load power equipment is introduced. Specifically, the composite material achieves outstanding radiative cooling performance with an average solar reflectance of up to 0.98, while its excellent atmospheric water harvesting performance ensures high evaporation cooling power without the need for manual water replenishment. As a result, the composite effectively lowers the temperature of outdoor heavy-load power equipment (e.g., transformers) by 25.3 °C. The excellent heat dissipation properties of the composite make it a powerful tool in safeguarding electrical systems.