Internal Structure of Dietary Habits as a Restriction on Healthy Eating Policy in Japan.

Although promoting healthy eating is a policy objective, the manageability of dietary habits remains uncertain. Personal dietary patterns reflect many factors, some of which are relatively manageable for individuals whilst others are not. In this article, assuming that some sort of information about the manageability of dietary habits is contained in the observed patterns of food consumption, we focused on dietary patterns on their own. We introduced a statistical descriptive model for data from a food frequency questionnaire, estimated the strength of pairwise linkage between foodstuffs, and grouped foodstuffs by applying community detection to the networks of the estimated inter-food linkages. Those linkages represent the co-movement of pairs of food in consumption. Furthermore, we demonstrated an analysis of the relationship between mental health and dietary habits, considering the aspect of the manageability of dietary habits. Using an observational study in Japan, we obtained the following results: 115 foodstuffs were divided into three groups for both genders, but the compositions were different by gender; in the analysis of mental and physical health, some stress response items were associated with a dependence on some of those food groupings (e.g., "extremely tired" was negatively associated with a group containing tomatoes, cucumber, mandarin, etc., for female subjects). As the grouping of foodstuffs based on our estimation depicted an internal structure of dietary habit that a healthy eating policy could regard as a constraint, it follows that we should design such a policy along the same lines as that grouping.

The Complexity of Borderline Personality Disorder: Network Analysis of Personality Factors and Defense Styles in the Context of Borderline Personality Organization.

OBJECTIVE: Borderline personality disorder (BPD) is known to share characteristics with a variety of personality disorders (PDs) and exhibits diverse patterns of defense mechanisms. To enhance our understanding of BPD, it's crucial to shift our focus from traditional categorical diagnostics to the dimensional traits shared with other PDs, as the borderline personality organization (BPO) model suggests. This approach illuminates the nuanced spectrum of BPD characteristics, offering deeper insights into its complexity. While studies have investigated the comorbidity of BPD with other PDs, research exploring the relationship between various personality factors and defense mechanisms within BPD itself has been scarce. The present study was undertaken to investigate the complex interrelationships between various personality factors and defense styles in individuals diagnosed with BPD. METHODS: Using a network analysis approach, data from 227 patients diagnosed with BPD were examined using the Defense Style Questionnaire and Personality Disorder Questionnaire-4+ for assessment. RESULTS: Intricate connections were observed between personality factors and defense styles. Significant associations were identified between various personality factors and defense styles, with immature defense styles, such as maladaptive and image-distorting being particularly prominent in BPD in the centrality analysis. The maladaptive defense style had the highest expected influence centrality. Furthermore, the schizotypal, dependent, and narcissistic personality factors demonstrated relatively high centrality within the network. CONCLUSION: Network analysis can effectively delineate the complexity of various PDs and defense styles. These findings are expected to facilitate a deeper understanding of why BPD exhibits various levels of organization and presents with heterogeneous characteristics, consistent with the perspectives proposed by the BPO.

Comparison of real data and simulated data analysis of a stopping rule based on the standard error of measurement in computerized adaptive testing for medical examinations in Korea: a psychometric study.

PURPOSE: This study aimed to compare and evaluate the efficiency and accuracy of computerized adaptive testing (CAT) under two stopping rules (SEM 0.3 and 0.25) using both real and simulated data in medical examinations in Korea. METHODS: This study employed post-hoc simulation and real data analysis to explore the optimal stopping rule for CAT in medical examinations. The real data were obtained from the responses of 3rd-year medical students during examinations in 2020 at Hallym University College of Medicine. Simulated data were generated using estimated parameters from a real item bank in R. Outcome variables included the number of examinees' passing or failing with SEM values of 0.25 and 0.30, the number of items administered, and the correlation. The consistency of real CAT result was evaluated by examining consistency of pass or fail based on a cut score of 0.0. The efficiency of all CAT designs was assessed by comparing the average number of items administered under both stopping rules. RESULTS: Both SEM 0.25 and SEM 0.30 provided a good balance between accuracy and efficiency in CAT. The real data showed minimal differences in pass/fail outcomes between the 2 SEM conditions, with a high correlation (r = 0.99) between ability estimates. The simulation results confirmed these findings, indicating similar average item numbers between real and simulated data. CONCLUSION: The findings suggest that both SEM 0.25 and 0.30 are effective termination criteria in the context of the Rasch model, balancing accuracy and efficiency in CAT.

What's New in Dementia Risk Prediction Modelling? An Updated Systematic Review.

Introduction: Identifying individuals at high risk of dementia is critical to optimized clinical care, formulating effective preventative strategies, and determining eligibility for clinical trials. Since our previous systematic reviews in 2010 and 2015, there has been a surge in dementia risk prediction modelling. The aim of this study was to update our previous reviews to explore, and critically review, new developments in dementia risk modelling. Methods: MEDLINE, Embase, Scopus, and Web of Science were searched from March 2014 to June 2022. Studies were included if they were population- or community-based cohorts (including electronic health record data), had developed a model for predicting late-life incident dementia, and included model performance indices such as discrimination, calibration, or external validation. Results: In total, 9,209 articles were identified from the electronic search, of which 74 met the inclusion criteria. We found a substantial increase in the number of new models published from 2014 (>50 new models), including an increase in the number of models developed using machine learning. Over 450 unique predictor (component) variables have been tested. Nineteen studies (26%) undertook external validation of newly developed or existing models, with mixed results. For the first time, models have also been developed in low- and middle-income countries (LMICs) and others validated in racial and ethnic minority groups. Conclusion: The literature on dementia risk prediction modelling is rapidly evolving with new analytical developments and testing in LMICs. However, it is still challenging to make recommendations about which one model is the most suitable for routine use in a clinical setting. There is an urgent need to develop a suitable, robust, validated risk prediction model in the general population that can be widely implemented in clinical practice to improve dementia prevention.

HLA Typing and Mutation Calling from Normal and Tumor Whole Genome Sequencing Data with ALPHLARD-NT.

HLA somatic mutations can alter the expression and function of HLA molecules, which in turn affect the ability of the immune system to recognize and respond to cancer cells. Therefore, it is crucial to accurately identify HLA somatic mutations to enhance our understanding of the interaction between cancer and the immune system and improve cancer treatment strategies. ALPHLARD-NT is a reliable tool that can accurately identify HLA somatic mutations as well as HLA genotypes from whole genome sequencing data of paired normal and tumor samples. Here, we provide a comprehensive guide on how to use ALPHLARD-NT and interpret the results.

Peptide bonds cleaved by pepsin are affected by the morphology of heat-induced ovalbumin aggregates.

The study aimed to assess the extent to which protein aggregation, and even the modality of aggregation, can affect gastric digestion, down to the nature of the hydrolyzed peptide bonds. By controlling pH and ionic strength during heating, linear or spherical ovalbumin (OVA) aggregates were prepared, then digested with pepsin. Statistical analysis characterized the peptide bonds specifically hydrolyzed versus those not hydrolyzed for a given condition, based on a detailed description of all these bonds. Aggregation limits pepsin access to buried regions of native OVA, but some cleavage sites specific to aggregates reflect specific hydrolysis pathways due to the denaturation-aggregation process. Cleavage sites specific to linear aggregates indicate greater denaturation compared to spherical aggregates, consistent with theoretical models of heat-induced aggregation of OVA. Thus, the peptides released during the gastric phase may vary depending on the aggregation modality. Precisely tuned aggregation may therefore allow subtle control of the digestion process.

Prediction of micropollutant degradation kinetic constant by ultrasonic using machine learning.

A prediction model based on XGBoost is proposed for ultrasonic degradation of micropollutants' kinetic constants. After parameter optimization through iteration, the model achieves Evaluation metrics with R2 and SMAPE reaching 0.99 and 2.06%, respectively. The impact of design parameters on predicting kinetic constants for ultrasound degradation of trace pollutants was assessed using Shapley additive explanations (SHAP). Results indicate that power density and frequency significantly impact the predictive performance. The database was sorted based on power density and frequency values. Subsequently, 800 raw data were split into small databases of 200 each. After confirming that reducing the database size doesn't affect prediction accuracy, ultrasound degradation experiments were conducted for five pollutants, yielding experimental data. A small database with experimental conditions within the numerical range was selected. Data meeting both feature conditions were filtered, resulting in an optimized 60-data group. After incorporating experimental data, a model was trained for prediction. Degradation kinetic constants for experiments (kE) were compared with predicted constants (for 800 data-based model: kP-800 and for 60 data-based model: kP-60). Results showed ibuprofen, bisphenol A, carbamazepine, and 17ß-Estradiol performed better on the 60-data group (kP-60/kE: 1.00, 0.99, 1.00, 1.00), while caffeine suited the model trained on the 800-data group (kP-800/kE: 1.02).

A statistical framework for a new Kavya-Manoharan Bilal distribution using ranked set sampling and simple random sampling.

In survival and stochastic lifespan modeling, numerous families of distributions are sometimes considered unnatural, unjustifiable theoretically, and occasionally superfluous. Here, a novel parsimonious survival model is developed using the Bilal distribution (BD) and the Kavya-Manoharan (KM) parsimonious transformation family. In addition to other analytical properties, the forms of probability density function (PDF) and behavior of the distributions' hazard rates are analyzed. The insights are theoretical as well as practical. Theoretically, we offer explicit equations for the single and product moments of order statistics from Kavya-Manoharan Bilal Distribution. Practically, maximum likelihood (ML) technique, which is based on simple random sampling (SRS) and ranked set sampling (RSS) sample schemes, is employed to estimate the parameters. Numerical simulations are used as the primary methodology to compare the various sampling techniques.

Quantitative morphological analysis framework of infant cranial sutures and fontanelles based on CT images.

Characterizing the suture morphological variation is a crucial step to investigate the influence of sutures on infant head biomechanics. This study aimed to establish a comprehensive quantitative framework for accurately capturing the cranial suture and fontanelle morphologies in infants. A total of 69 CT scans of 2-4 month-old infant heads were segmented to identify semilandmarks at the borders of cranial sutures and fontanelles. Morphological characteristics, including length, width, sinuosity index (SI), and surface area, were measured. For this, an automatic method was developed to determine the junction points between sutures and fontanelles, and thin-plate-spline (TPS) was utilized for area calculation. Different dimensionality reduction methods were compared, including nonlinear and linear principal component analysis (PCA), as well as deep-learning-based variational autoencoder (VAE). Finally, the significance of various covariates was analyzed, and regression analysis was performed to establish a statistical model relating morphological parameters with global parameters. This study successfully developed a quantitative morphological framework and demonstrate its application in quantifying morphologies of infant sutures and fontanelles, which were shown to significantly relate to global parameters of cranial size, suture SI, and surface area for infants aged 2-4 months. The developed framework proved to be reliable and applicable in extracting infant suture morphology features from CT scans. The demonstrated application highlighted its potential to provide valuable insights into the morphologies of infant cranial sutures and fontanelles, aiding in the diagnosis of suture-related skull fractures. Infant suture, Infant fontanelle, Morphological variation, Morphology analysis framework, Statistical model.

A systematic review of prediction models on arteriovenous fistula: Risk scores and machine learning approaches.

OBJECTIVE: Failure-to-mature and early stenosis remains the Achille's heel of hemodialysis arteriovenous fistula (AVF) creation. The maturation and patency of an AVF can be influenced by a variety of demographic, comorbidity, and anatomical factors. This study aims to review the prediction models of AVF maturation and patency with various risk scores and machine learning models. DATA SOURCES AND REVIEW METHODS: Literature search was performed on PubMed, Scopus, and Embase to identify eligible articles. The quality of the studies was assessed using the Prediction model Risk Of Bias ASsessment (PROBAST) Tool. The performance (discrimination and calibration) of the included studies were extracted. RESULTS: Fourteen studies (seven studies used risk score approaches; seven studies used machine learning approaches) were included in the review. Among them, 12 studies were rated as high or unclear "risk of bias." Six studies were rated as high concern or unclear for "applicability." C-statistics (Model discrimination metric) was reported in five studies using risk score approach (0.70-0.886) and three utilized machine learning methods (0.80-0.85). Model calibration was reported in three studies. Failure-to-mature risk score developed by one of the studies has been externally validated in three different patient populations, however the model discrimination degraded significantly (C-statistics: 0.519-0.53). CONCLUSION: The performance of existing predictive models for AVF maturation/patency is underreported. They showed satisfactory performance in their own study population. However, there was high risk of bias in methodology used to build some of the models. The reviewed models also lack external validation or had reduced performance in external cohort.

Understanding the Nonlinear Response of SiPMs.

A systematic study of the nonlinear response of Silicon Photomultipliers (SiPMs) was conducted through Monte Carlo (MC) simulations. The MC code was validated against experimental data for two different SiPMs. Nonlinearity mainly depends on the balance between the photon rate and the pixel recovery time. Additionally, nonlinearity has been found to depend on the light pulse shape, the correlated noise, the overvoltage dependence of the photon detection efficiency, and the impedance of the readout circuit. Correlated noise has been shown to have a minor impact on nonlinearity, but it can significantly affect the shape of the SiPM output current. Considering these dependencies and a previous statistical analysis of the nonlinear response of SiPMs, two phenomenological fitting models were proposed for exponential-like and finite light pulses, explaining the roles of their various terms and parameters. These models provide an accurate description of the nonlinear responses of SiPMs at the level of a few percentages for a wide range of situations.

Evaluation and monitoring of the water quality of an Argentinian urban river applying multivariate statistics.

In this work, we present the water quality assessment of an urban river, the San Luis River, located in San Luis Province, Argentina. The San Luis River flows through two developing cities; hence, urban anthropic activities affect its water quality. The river was sampled spatially and temporally, evaluating ten physicochemical variables on each water sample. These data were used to calculate a Simplified Index of Water Quality in order to estimate river water quality and infer possible contamination sources. Data were statistically analyzed with the opensource software R, 4.1.0 version. Principal component analysis, cluster analysis, correlation matrices, and heatmap analysis were performed. Results indicated that water quality decreases in areas where anthropogenic activities take place. Robust inferential statistical analysis was performed, employing an alternative of multivariate analysis of variance (MANOVA), MANOVA.wide function. The most statistically relevant physicochemical variables associated with water quality decrease were used to develop a multiple linear regression model to estimate organic matter, reducing the variables necessary for continuous monitoring of the river and, hence, reducing costs. Given the limited information available in the region about the characteristics and recovery of this specific river category, the model developed is of vital importance since it can quickly detect anthropic alterations and contribute to the environmental management of the rivers. This model was also used to estimate organic matter at sites located in other similar rivers, obtaining satisfactory results.

Examining confidential wholesale margin estimates in European countries for the price negotiation of patented drugs in Germany: a statistical model.

BACKGROUND: Based on the legal framework laid down in section 130b (9) of Book V of the German Social Code, various criteria are relevant for the negotiated price for new patented drugs in Germany. European reference prices (ERPs) are one criterion. The ERP is based on the ex-factory prices (EFPs) of the countries included in the European country basket. However, in some of these countries, the EFP is not published due to confidential wholesale margins. Wholesale margins must therefore be estimated and deducted from purchase prices. In this context literature-based estimates to date do not assume regressive margins with higher pharmaceutical prices. This assumption is questionable and can lead to systematically underestimated country prices, especially for high-priced drugs. Percentage wholesale margins in the majority of European countries develop to a comparable extent regressively with increasing prices. It should therefore be examined (1) whether statistical models can predict the margins of individual countries, in principle and especially for countries where margins are unknown and regressive trends are likely, and (2) to what extent the estimation of margins improves when regressive statistical models are used to estimate margins instead of cross-price averages published in the literature. METHODS: Qualitative preliminary research explores the basic wholesale pricing mechanisms in countries with confidential wholesale margins. Wholesale margins for reimbursable drugs were then modeled for regulated European countries. Estimation quality and impact of the model was compared to estimations based on average margins. RESULTS: In both regulated countries and in countries with confidential wholesale margins, percentage margins of wholesalers develop regressively as drug prices rise. Regressive courses of margins can be resiliently modeled for the regulated countries using a power distribution with significantly lower mean squared errors in a linear mixed model in comparison to literature-based estimations with country-specific cross-price averages. CONCLUSION: If there is reason to believe that margins are regressive, confidential wholesale margins are expected to be better estimated by the power function based on margins of regulated countries than by the published country-specific average margins, reducing significantly inaccurate effects on margin estimations of high-price drugs.

Implications of variability on medical device chemical equivalence assessment.

Chemical equivalence testing can be used to assess the biocompatibility implications of a materials or manufacturing change for a medical device. This testing can provide a relatively facile means to evaluate whether the change may result in additional or different toxicological concerns. However, one of the major challenges in the interpretation of chemical equivalence data is the lack established criteria for determining if two sets of extractables data are effectively equivalent. To address this gap, we propose a two-part approach based upon a relatively simple statistical model. First, the probability of a false positive conclusion, wherein there is an incorrectly perceived increase for a given analyte in the comparator relative to the baseline device, can be reduced to a prescribed level by establishing an appropriate acceptance criterion for the ratio of the observed means. Second, the probability of a false negative conclusion, where an actual increase in a given analyte cannot be discerned from the test results, can be minimized by specifying a limiting value of applicability based on the margin of safety (MoS) of the analyte. This approach provides a quantitative, statistically motivated method to interpret chemical equivalence data, despite the relatively high intrinsic variability and small number of replicates typically associated with a chemical characterization evaluation.

Machine learning vs. statistical model for prediction modeling and experimental validation: Application in groundwater permeable reactive barrier width design.

Permeable reactive barrier (PRB) is an effective in-situ technology for groundwater remediation. The important factors in PRB design are the width and reactive material. In this study, the beaded coal mine drainage sludge (BCMDS) was employed as the filling material to adsorb arsenic pollutants in groundwater, aiming to design the width of PRB. The design methods involving traditional continue column experiments and empirical formulas, as well as machine learning (ML) predictions and statistical methods, which are compared with each other. Traditional methods are determined based on breakthrough curves under several conditions. ML method has advantages in predicting the width of mass transfer zone (WMTZ), which simultaneously consider the characteristics of material, pollutant, and environmental conditions, with data collected from articles. After data preprocessing and model optimizing, selected the XGBoost algorithm based on the high accuracy, which shows good prediction for WMTZ (R2 = 0.97, RMSE = 0.15). The experimentally derived WMTZ values were also used to validate the predictions, demonstrating the ML low error rate of 7.04 % and the feasibility. Subsequent statistical analysis of multiple linear regression (MLR) showed the error rate of 39.43 %, interpret superiority of ML due to the complexity of influencing factors and the insufficient precision of math regression. Compared to traditional width design methods, ML can improve design efficiency and save experimental time and manpower. Further expansion of the dataset and optimization of algorithms could enhance the accuracy of ML, overcoming existing limitations and gaining broader applications.

Analysis of Slag-Containing Steamed Concrete's Composition Efficiency.

Thermal power plant slag is a waste that is presently obtained from many power stations all over the world. A possible method for its utilization is using it to produce concrete. This paper analyses the effect of thermal power plant slag on the technological properties of concrete mixtures and the mechanical properties of concrete subjected to heat-moisture processing. Quantitative estimates of the investigated factors' influence on the concrete mixture's water demand and the strength of steamed concrete were obtained. The influences of TPP slag content and its water demand on concrete composition features as well as concrete strength are shown. The novelty of the work lies in the use of an experimental-statistical model to optimize the composition of steamed concrete using slag from the viewpoint of maximum strength per kilogram of cement. It has been demonstrated that the optimal part of slag in aggregate, which provides maximum strength at 4 h and 28 days after steaming, is 0.5-0.55 and 0.45-0.55, respectively. A method for the design of concrete composition using slag from thermal power plants is proposed.

Antibacterial Activity and Mechanisms of Plant Flavonoids against Gram-Negative Bacteria Based on the Antibacterial Statistical Model.

The antimicrobial quantitative structure-activity relationship of plant flavonoids against Gram-positive bacteria was established in our previous works, and the cell membrane was confirmed as a major site of action. To investigate whether plant flavonoids have similar antibacterial effects and mechanisms against both Gram-negative and Gram-positive bacteria, here, the minimum inhibitory concentrations (MICs) of 37 plant flavonoids against Escherichia coli were determined using the microdilution broth method, and then the correlation between their lipophilic parameter ACD/LogP or LogD7.40 value and their MIC was analyzed. Simultaneously, the correlation between the ACD/LogP or LogD7.40 value and the MIC of 46 plant flavonoids reported in the literature against E. coli was also analyzed. Both sets of results showed that there is a significant correlation between the LogP value and the MIC of plant flavonoids against Gram-negative bacteria. However, it is difficult to effectively predict the MIC of plant flavonoids against Gram-negative bacteria from their lipophilic parameters. By comparing two regression curves derived from plant flavonoids against Gram-negative and Gram-positive bacteria, it was further discovered that the antibacterial activities of most plant flavonoids against Gram-negative bacteria are stronger than those against Gram-positive bacteria when their LogP values are less than approximately 3.0, but the opposite is true when their LogP values are more than approximately 3.6. Moreover, this comparison also suggests that unlike mainly acting on the cell membrane of Gram-positive bacteria, plant flavonoids have multiple mechanisms against Gram-negative species, while the cell membrane is also an important action site among them. Combined with the correlation analyses between the enzyme inhibitory activity and the LogP value of the reported flavonoids, it was further suggested that DNA gyrase is another important target of plant flavonoids against Gram-negative bacteria.

Super-resolution of Retinal Optical Coherence Tomography Images Using Statistical Modeling.

Background: Optical coherence tomography (OCT) imaging has emerged as a promising diagnostic tool, especially in ophthalmology. However, speckle noise and downsampling significantly degrade the quality of OCT images and hinder the development of OCT-assisted diagnostics. In this article, we address the super-resolution (SR) problem of retinal OCT images using a statistical modeling point of view. Methods: In the first step, we utilized Weibull mixture model (WMM) as a comprehensive model to establish the specific features of the intensity distribution of retinal OCT data, such as asymmetry and heavy tailed. To fit the WMM to the low-resolution OCT images, expectation-maximization algorithm is used to estimate the parameters of the model. Then, to reduce the existing noise in the data, a combination of Gaussian transform and spatially constraint Gaussian mixture model is applied. Now, to super-resolve OCT images, the expected patch log-likelihood is used which is a patch-based algorithm with multivariate GMM prior assumption. It restores the high-resolution (HR) images with maximum a posteriori (MAP) estimator. Results: The proposed method is compared with some well-known super-resolution algorithms visually and numerically. In terms of the mean-to-standard deviation ratio (MSR) and the equivalent number of looks, our method makes a great superiority compared to the other competitors. Conclusion: The proposed method is simple and does not require any special preprocessing or measurements. The results illustrate that our method not only significantly suppresses the noise but also successfully reconstructs the image, leading to improved visual quality.

Modelling fuel oil transformation on geographically different seacoasts and assessing their self-cleansing capacity.

The present paper considers the results of long-term (up to 17 years) in situ and laboratory research carried out on oiled French, Spanish, and Russian seacoasts. The objective of this research is to quantify the influence of geographical factors on the rates of natural transformation of the heavy fuel oil stranded ashore and to develop an empirical statistical model in order to evaluate the self-cleansing capacity of the coastal environment. In a number of field campaigns, 363 samples of weathered oil slicks and tar balls have been collected and analysed with the use of thin-layer chromatography combined with optical and gravimetric methods. The results obtained have been subjected to multiple nonlinear regression analyses. It has been shown that heavy fuel oil natural attenuation is more active in continental or estuarine environments influenced by nutrient-rich freshwater runoff and characterised by a higher number of sunny days, solar irradiation, and large temperature fluctuations. On the oceanic coasts, especially in sectors with low hydrodynamic energy, these processes take more time. The resulting model allows for the identification and mapping of the most vulnerable seacoasts, characterised by a low potential to degrade oil pollution. This information may be used in the contingency plans in order to optimise clean-up techniques and associated costs.