Structural Color Enhancement through Synchronizing Natural Convection and Marangoni Flow in Pendant Drops.

Structural color, renowned for its enduring vibrancy, has been extensively developed and applied in the fields of display and anticounterfeiting. However, its limitations in brightness and saturation hinder further application in these areas. Herein, we propose a pendant evaporation self-assembly method to address these challenges simultaneously. By leveraging natural convection and Marangoni flow synchronization, the self-assembly process enhances the dynamics and duration of colloidal nanoparticles, thereby enhancing the orderliness of colloidal photonic crystals. On average, this technique boosts the brightness of structural color by 20% and its saturation by 35%. Moreover, pendant evaporation self-assembly is simple and convenient to operate, making it suitable for industrial production. We anticipate that its adoption will remarkably advance the industrialization of structural color, facilitating its engineering applications across various fields, such as display technology and anticounterfeiting identification.

Structural Colored Fabric Based on Monodisperse Cu2O Microspheres.

Structural-colored fabrics have been attracting much attention due to their eco-friendliness, dyelessness, and anti-fading properties. Monodisperse microspheres of metal, metal oxide, and semiconductors are promising materials for creating photonic crystals and structural colors owing to their high refractive indices. Herein, Cu2O microspheres were prepared by a two-step reduction method at room temperature; the size of Cu2O microspheres was controlled by changing the molar ratio of citrate to Cu2+; and the size of Cu2O microspheres was tuned from 275 nm to 190 nm. The Cu2O microsphere dispersions were prepared with the monodispersity of Cu2O microspheres. Furthermore, the effect of the concentration of Cu2O microsphere and poly(butyl acrylate) on the structural color was also evaluated. Finally, the stability of the structural color against friction and bending was also tested. The results demonstrated that the different structural colors of fabrics were achieved by adjusting the size of the Cu2O microsphere, and the color fastness of the structural color was improved by using poly(butyl acrylate) as the adhesive.

Cellulose nanocrystals-based optical organohydrogel fiber with customizable iridescent colors for strain and humidity response.

Stimuli-responsive optical hydrogels are widely used in various fields including environmental sensing, optical encryption, and intelligent display manufacturing. However, these hydrogels are susceptible to water losses when exposed to air, leading to structural damage, significantly shortened service lives, and compromised durability. This study presents mechanically robust, environmentally stable, and multi-stimuli responsive optical organohydrogel fibers with customizable iridescent colors. These fibers are fabricated by incorporating tunicate cellulose nanocrystals, alginate, and acrylamide in a glycerol-water binary system. The synthesized fibers exhibit high strength (1.38 MPa), moisture retention capabilities, and elastic properties. Furthermore, a sensor based on these fibers demonstrates high- and low-temperature resistance along with stimuli-responsive characteristics, effectively detecting changes in environmental humidity and strains. Moreover, the fiber sensor demonstrates continuous, repeatable, and quantitatively predictable moisture discoloration responses across a humidity range of 11 % and 98 %. During strain sensing, the optical-organohydrogel-based sensor demonstrates a large working strain (50 %) and excellent cycling stability, underscoring its potential for effectively monitoring a wide range of intricate human motions. Overall, the synthesized fibers and their simple fabrication method can elicit new avenues for numerous related applications including the large-scale implementation of advanced wearable technology.

Self-Healing Dynamic Hydrogel Microparticles with Structural Color for Wound Management.

Chronic diabetic wounds confront a significant medical challenge because of increasing prevalence and difficult-healing circumstances. It is vital to develop multifunctional hydrogel dressings, with well-designed morphology and structure to enhance flexibility and effectiveness in wound management. To achieve these, we propose a self-healing hydrogel dressing based on structural color microspheres for wound management. The microsphere comprised a photothermal-responsive inverse opal framework, which was constructed by hyaluronic acid methacryloyl, silk fibroin methacryloyl and black phosphorus quantum dots (BPQDs), and was further re-filled with a dynamic hydrogel. The dynamic hydrogel filler was formed by Knoevenagel condensation reaction between cyanoacetate and benzaldehyde-functionalized dextran (DEX-CA and DEX-BA). Notably, the composite microspheres can be applied arbitrarily, and they can adhere together upon near-infrared irradiation by leveraging the BPQDs-mediated photothermal effect and the thermoreversible stiffness change of dynamic hydrogel. Additionally, eumenitin and vascular endothelial growth factor were co-loaded in the microspheres and their release behavior can be regulated by the same mechanism. Moreover, effective monitoring of the drug release process can be achieved through visual color variations. The microsphere system has demonstrated desired capabilities of controllable drug release and efficient wound management. These characteristics suggest broad prospects for the proposed composite microspheres in clinical applications.

Beyond Color Boundaries: Pioneering Developments in Cholesteric Liquid Crystal Photonic Actuators.

Creatures in nature make extensive use of structural color adaptive camouflage to survive. Cholesteric liquid crystals, with nanostructures similar to those of natural organisms, can be combined with actuators to produce bright structural colors in response to a wide range of stimuli. Structural colors modulated by nano-helical structures can continuously and selectively reflect specific wavelengths of light, breaking the limit of colors recognizable by the human eye. In this review, the current state of research on cholesteric liquid crystal photonic actuators and their technological applications is presented. First, the basic concepts of cholesteric liquid crystals and their nanostructural modulation are outlined. Then, the cholesteric liquid crystal photonic actuators responding to different stimuli (mechanical, thermal, electrical, light, humidity, magnetic, pneumatic) are presented. This review describes the practical applications of cholesteric liquid crystal photonic actuators and summarizes the prospects for the development of these advanced structures as well as the challenges and their promising applications.

Programmable multimode optical encryption of advanced printable security inks by integrating structural color with Down/Up- conversion photoluminescence.

Optical information encryption with high encoding capacities can significantly boost the security level of anti-counterfeiting in the scenario of guaranteeing the authenticity of a wide scope of common and luxury goods. In this work, a novel counterfeiting material with high-degree complexity is fabricated by microencapsulating cholesteric liquid crystals and triplet-triplet annihilation upconversion fluorophores to integrate structural coloration with fluorescence and upconversion photoluminescence. Moreover, the multimode security ink presents tailorable optical behaviors and programmable abilities on flexible substrates by various printing techniques, which offers distinct information encryption under different optical modes. The advanced strategy provides a practical versatile platform for high-secure-level multimode optical inks with largely enhanced encoding capacities, programmability, printability, and cost-effectiveness, which manifests enormous potentials for information encryption and anti-counterfeiting technology.

Physical Unclonable Functions with Hyperspectral Imaging System for Ultrafast Storage and Authentication Enabled by Random Structural Color Domains.

Physical unclonable function (PUF) is attractive in modern encryption technologies. Addressing the disadvantage of slow data storage/authentication in optical PUF is paramount for practical applications but remains an on-going challenge. Here, a highly efficient PUF strategy based on random structural color domains (SCDs) of cellulose nanocrystal (CNC) is proposed for the first time, combing with hyperspectral imaging system (HIS) for ultrafast storage and authentication. By controlling the growth and fusion behavior of the tactoids of CNC, the SCDs display an irregular and random distribution of colors, shapes, sizes, and reflectance spectra, which grant unique and inherent fingerprint-like characteristics that are non-duplicated. Based on images and spectra, these fingerprint features are used to develop two sets of PUF key generation methods, which can be respectively authenticated at the user-end and the manufacturer-front-end that achieving a high coding capacity of at least 22304. Notably, the use of HIS greatly shortens the time of key reading and generation (≈5 s for recording, 0.5-0.7 s for authentication). This new optical PUF labels can not only solve slow data storage and complicated authentication in optical PUF, but also impulse the development of CNC in industrial applications by reducing color uniformity requirement.

Research Progress of Bioinspired Structural Color in Camouflage.

Bioinspired structural color represents a burgeoning field that draws upon principles, strategies, and concepts derived from biological systems to inspire the design of novel technologies or products featuring reversible color changing mechanisms, with significant potential applications for camouflage, sensors, anticounterfeiting, etc. This mini-review focuses specifically on the research progress of bioinspired structural color in the realm of camouflage. Firstly, it discusses fundamental mechanisms of coloration in biological systems, encompassing pigmentation, structural coloration, fluorescence, and bioluminescence. Subsequently, it delineates three modulation strategies-namely, photonic crystals, film interference, and plasmonic modulation-that contribute to the development of bioinspired structural color materials or devices. Moreover, the review critically assesses the integration of bioinspired structural color materials with environmental contexts, with a particular emphasis on their application in camouflage. Finally, the paper outlines persisting challenges and suggests future development trends in the camouflage field via bioinspired structural color.

Visual Strain Sensors Based on Fabry-Perot Structures for Structural Integrity Monitoring.

Strain sensors that can rapidly and efficiently detect strain distribution and magnitude are crucial for structural health monitoring and human-computer interactions. However, traditional electrical and optical strain sensors make access to structural health information challenging because data conversion is required, and they have intricate, delicate designs. Drawing inspiration from the moisture-responsive coloration of beetle wing sheaths, we propose using Ecoflex as a flexible substrate. This substrate is coated with a Fabry-Perot (F-P) optical structure, comprising a "reflective layer/stretchable interference cavity/reflective layer", creating a dynamic color-changing visual strain sensor. Upon the application of external stress, the flexible interference chamber of the sensor stretches and contracts, prompting a blue-shift in the structural reflection curve and displaying varying colors that correlate with the applied strain. The innovative flexible sensor can be attached to complex-shaped components, enabling the visual detection of structural integrity. This biomimetic visual strain sensor holds significant promise for real-time structural health monitoring applications.

Switchable and conspicuous retroreflective sensors inspired by the wing scale of an emerald swallowtail.

Butterfly wings possess distinct micro/nanostructures that contribute to their vibrant coloration, light-trapping capabilities, and sensitivity to various stimuli. These complex features have inspired the creation of diverse devices and systems, such as sensors, photovoltaics, photocatalysis, and robotics. Specifically, the wing scales of the Emerald Swallowtail (Papilio palinurus) display iridescent, polarization-sensitive, and retroreflective colors due to their hierarchical structures. However, current technologies fail to mimic these natural designs fully, limiting their practical application in everyday life. In this study, we introduce a groundbreaking method for fabricating artificial wing scales that emulate the biological structure's functionality with a much simpler geometry. By integrating self-graded lossy media into metallic micro-concavity arrays, we achieve pronounced iridescent effects in both coaxial and non-coaxial arrangements, while preserving retroreflective properties. In particular, the simplified design allows for switchable color patterns based on the viewing angle. Demonstrating the concept, we successfully employ these conspicuous retroreflectors in hydrogen gas detection and the bi-directional/switchable recognition of patterned signals.

Patterned Photonic Actuators with Dynamic Shape-Morphing and Color-Changing Capabilities Fabricated by Athermal Embossing Technology.

Stimuli-responsive patterned photonic actuators, characterized by their patterned nano/microscale structures and capacity to demonstrate synergistic color changes and shape morphing in response to external stimuli, have attracted intense scientific attention. However, traditional patterned photonic actuator systems still face limitations such as cumbersome and time-consuming preparation processes and small-scale deformations. Herein, we introduce a facile approach involving an athermal embossing technique to rapidly fabricate patterned photonic actuators based on near-infrared (NIR) light-responsive liquid crystal elastomers. The resulting patterned photonic actuators demonstrate remarkable features, including brilliant angle-dependent structural color, complex three-dimensional actuation, and good color durability under NIR light stimulation. As illustrative demonstrations of the proof-of-concept, we fabricate two light-fuelled patterned photonic soft actuators: a butterfly-inspired actuator that can produce wing-flapping dynamic changes in structural color, and an origami crane-shaped actuator with shape memory, structural color information storage, and dynamic display properties. This strategy provides distinct insights into the design and fabrication of various patterned photonic soft robotic devices and intelligent actuators.

Dual-Mode Hydrogels with Structural and Fluorescent Colors toward Multistage Secure Information Encryption.

Constructing an anti-counterfeiting material with non-interference dual optical modes is an effective way to improve information security. However, it remains challenging to achieve multistage secure information encryption due to the limited stimulus responsiveness and color tunability of the current dual-mode materials. Herein, a dual-mode hydrogel with both independently tunable structural and fluorescent colors toward multistage information encryption, is reported. In this hydrogel system, the rigid lamellar structure of poly(dodecylglyceryl itaconate) (pDGI) formed by shear flow-induced self-assembly provides the restricted domains wherein monomers undergo polymerization to form a hydrogel network, producing structural color. The introduction of fluorescent monomer 6-acrylamidopicolinate (6APA) as a complexation site provides the possibility of fluorescent color formation. The hydrogel's angle-dependent structural color can be controlled by adjusting the crosslinking density and water content. Additionally, the fluorescence color can be modulated by adjusting the ratio of lanthanide ions. Information of dual-mode can be displayed separately in different channels and synergistically overlayed to read the ultimate message. Thus, a multistage information encryption system based on this hydrogel is devised through the programed decryption process. This strategy holds tremendous potential as a platform for encrypting and safeguarding valuable and authentic information in the field of anti-counterfeiting.

Angle-Multiplexed 3D Photonic Superstructures with Multi-Directional Switchable Structural Color for Information Transformation, Storage, and Encryption.

Creating photonic crystals that can integrate and switch between multiple structural color images will greatly advance their utility in dynamic information transformation, high-capacity storage, and advanced encryption, but has proven to be highly challenging. Here, it is reported that by programmably integrating newly developed 1D quasi-periodic folding structures into a 3D photonic crystal, the generated photonic superstructure exhibits distinctive optical effects that combine independently manipulatable specular and anisotropic diffuse reflections within a versatile protein-based platform, thus creating different optical channels for structural color imaging. The polymorphic transition of the protein format allows for the facile modulation of both folding patterns and photonic lattices and, therefore, the superstructure's spectral response within each channel. The capacity to manipulate the structural assembly of the superstructure enables the programmable encoding of multiple independent patterns into a single system, which can be decoded by the simple adjustment of lighting directions. The multifunctional utility of the photonic platform is demonstrated in information processing, showcasing its ability to achieve multimode transformation of information codes, multi-code high-capacity storage, and high-level numerical information encryption. The present strategy opens new pathways for achieving multichannel transformable imaging, thereby facilitating the development of emerging information conversion, storage, and encryption media using photonic crystals.

Synthesis and thermally-induced gelation of interpenetrating nanogels.

Thermally-induced in-situ gelation of polymers and nanogels is of significant importance for injectable non-invasive tissue engineering and delivery systems of drug delivery system. In this study, we for the first time demonstrated that the interpenetrating (IPN) nanogel with two networks of poly (N-isopropylacrylamide) (PNIPAM) and poly (N-Acryloyl-l-phenylalanine) (PAphe) underwent a reversible temperature-triggered sol-gel transition and formed a structural color gel above the phase transition temperature (Tp). Dynamic light scattering (DLS) studies confirmed that the Tp of IPN nanogels are the same as that of PNIPAM, independent of Aphe content of the IPN nanogels at pH of 6.5 âˆ¼ 7.4. The rheological and optical properties of IPN nanogels during sol-gel transition were studied by rheometer and optical fiber spectroscopy. The results showed that the gelation time of the hydrogel photonic crystals assembled by IPN nanogel was affected by temperature, PAphe composition, concentration, and sequence of interpenetration. As the temperature rose above the Tp, the Bragg reflection peak of IPN nanogels exhibited blue shift due to the shrinkage of IPN nanogels. In addition, these colored IPN nanogels demonstrated good injectability and had no obvious cytotoxicity. These IPN nanogels will open an avenue to the preparation and thermally-induced in-situ gelation of novel NIPAM-based nanogel system.

A Tunable Hydrophilic-Hydrophobic, Stimulus Responsive, and Robust Iridescent Structural Color Bionic Film with Chiral Photonic Crystal Nanointerface.

Bio-inspired in nature, using nanomaterials to fabricate the vivid bionic structural color and intelligent stimulus responsive interface as smart skin or optical devices are widely concerned and remain a huge challenge. Here, the bionic flexible film is designed and fabricated with chiral nanointerface and tunable hydrophilic-hydrophobic by the ultrasonic energy perturbation strategy and crosslinking of the cellulose nanocrystals (CNC). An intelligent nanointerface with adjustable hydrophilic and hydrophobic properties is constructed by the supramolecular assembly using a smart ionic liquid molecule. The bionic flexible film possessed the variable hydrophilic-hydrophobic, stimulus responsive, and robust iridescent structural color. The reflective wavelength and the helical pitch of the film can be easily modulated through the ultrasonic energy perturbation strategy. The bionic flexible film by covalent cross-linking has excellent robustness, good elasticity and flexibility. The tunable brilliant structural color of the chiral nanointerface is attributed to the surface charge change of the CNC photonic crystal, which is disturbed by ultrasonic energy perturbation. The bionic flexible film with tunable structure color has intelligent hydrophilic and hydrophobic stimulus response properties. The chiral bionic materials have potential applications in smart skin, optical devices, bionic materials, robots, anti-counterfeiting, colorful displays, and stealth materials.

Operando Spectroscopic Elucidation of the Bubble Sunshade Effect in Inorganic-Biological Hybrids for Photosynthetic Hydrogen Production.

Hydrogen production by photosynthetic hybrid systems (PBSs) offers a promising avenue for renewable energy. However, the light-harvesting efficiency of PBSs remains constrained due to unclear intracellular kinetic factors. Here, we present an operando elucidation of the sluggish light-harvesting behavior for existing PBSs and strategies to circumvent them. By quantifying the spectral shift in the structural color scattering of individual PBSs during the photosynthetic process, we observe the accumulation of product hydrogen bubbles on their outer membrane. These bubbles act as a sunshade and inhibit light absorption. This phenomenon elucidates the intrinsic constraints on the light-harvesting efficiency of PBSs. The introduction of a tension eliminator into the PBSs effectively improves the bubble sunshade effect and results in a 4.5-fold increase in the light-harvesting efficiency. This work provides valuable insights into the dynamics of transmembrane transport gas products and holds the potential to inspire innovative designs for improving the light-harvesting efficiency of PBSs.

Fine Optimization of Colloidal Photonic Crystal Structural Color for Physically Unclonable Multiplex Encryption and Anti-Counterfeiting.

Robust anti-counterfeiting techniques aim for easy identification while remaining difficult to forge, especially for high-value items such as currency and passports. However, many existing anti-counterfeiting techniques rely on deterministic processes, resulting in loopholes for duplication and counterfeiting. Therefore, achieving high-level encryption and easy authentication through conventional anti-counterfeiting techniques has remained a significant challenge. To address this, this work proposes a solution that combined fluorescence and structural colors, creating a physically unclonable multiplex encryption system (PUMES). In this study, the physicochemical properties of colloidal photonic inks are systematically adjusted to construct a comprehensive printing phase diagram, revealing the printable region. Furthermore, the brightness and color saturation of inkjet-printed colloidal photonic crystal structural colors are optimized by controlling the substrate's hydrophobicity, printed droplet volume, and the addition of noble metals. Finally, fluorescence is incorporated to build PUMES, including macroscopic fluorescence and structural color patterns, as well as microscopic physically unclonable fluorescence patterns. The PUMES with intrinsic randomness and high encoding capacity are authenticated by a deep learning algorithm, which proved to be reliable and efficient under various observation conditions. This approach can provide easy identification and formidable resistance against counterfeiting, making it highly promising for the next-generation anti-counterfeiting of currency and passports.

Achieving High-Temperature Stable Structural Color through Nanostructuring in Polymer-Derived Ceramics.

Structural colors offer a myriad of advantages over conventional pigment-based colors, which often rely on toxic chemical substances that are prone to UV degradation. To take advantage of these benefits in demanding environments, there is growing interest in producing structural colors from ceramics. Polymer-derived ceramics (PDCs) emerge as a compelling choice, presenting two distinct advantages: their enhanced shape ability in their polymeric state associated with impressive temperature resistance once converted to ceramics. This study pioneers the fabrication of noniridescent structural colors from silicon oxycarbide (SiOC) PDC, enabled by the nanostructuring of an inverse photonic glass within the PDC material. This design, a functionally graded material with an inverse photonic glass (FGM-PhG) structure, leverages the innate light-absorbing properties of SiOC, yielding a vivid structural color that maintains its saturation even in white surroundings. This study elucidates the process-structure-properties relationship for the obtained structural colors by investigating each layer of the functionally graded material (FGM) in a stepwise coating deposition process. To further emphasize the exceptional processing flexibility of PDCs, the three-step process is later transferred to an additive manufacturing approach. Finally, the FGM-PhG structural colors are demonstrated to have remarkable thermal stability up to 1000 °C for 100 h, possibly making them the most thermally stable ceramic structural colors to date.

Implantable Resistive Strain Sensor-Decorated Colloidal Crystal Hydrogel Catheter for Intestinal Tract Pressure Sensing.

In the quest to develop advanced monitoring systems for intestinal peristaltic stress, this study introduces a groundbreaking approach inspired by nature's sensory networks. By the integration of novel materials and innovative manufacturing techniques, a multifunctional Janus hydrogel patch has been engineered. This unique patch not only demonstrates superior stress-sensing capabilities in the intricate intestinal environment but also enables adhesion to wet tissue surfaces. This achievement opens new avenues for real-time physiological monitoring and potential therapeutic interventions in the realm of gastrointestinal health.

Nanoscale millefeuilles produce iridescent bill ornaments in birds.

Colors are well studied in bird plumage but not in other integumentary structures. In particular, iridescent colors from structures other than plumage are undescribed in birds. Here, we show that a multilayer of keratin and lipids is sufficient to produce the iridescent bill of Spermophaga haematina. Furthermore, that the male bill is presented to the female under different angles during display provides support for the hypothesis that iridescence evolved in response to sexual selection. This is the first report of an iridescent bill, and only the second instance of iridescence in birds in which melanosomes are not involved. Furthermore, an investigation of museum specimens of an additional 98 species, showed that this evolved once, possibly twice. These results are promising, as they suggest that birds utilize a wider array of physical phenomena to produce coloration and should further stimulate research on nonplumage integumentary colors.