The role of sulfur cycle in new particle formation: Cycloaddition reaction of SO3 to H2S.

The chemistry of sulfur cycle contributes significantly to the atmospheric nucleation process, which is the first step of new particle formation (NPF). In the present study, cycloaddition reaction mechanism of sulfur trioxide (SO3) to hydrogen sulfide (H2S) which is a typical air pollutant and toxic gas detrimental to the environment were comprehensively investigate through theoretical calculations and Atmospheric Cluster Dynamic Code simulations. Gas-phase stability and nucleation potential of the product thiosulfuric acid (H2S2O3, TSA) were further analyzed to evaluate its atmospheric impact. Without any catalysts, the H2S + SO3 reaction is infeasible with a barrier of 24.2 kcal/mol. Atmospheric nucleation precursors formic acid (FA), sulfuric acid (SA), and water (H2O) could effectively lower the reaction barriers as catalysts, even to a barrierless reaction with the efficiency of cis-SA > trans-FA > trans-SA > H2O. Subsequently, the gas-phase stability of TSA was investigated. A hydrolysis reaction barrier of up to 61.4 kcal/mol alone with an endothermic isomerization reaction barrier of 5.1 kcal/mol under the catalytic effect of SA demonstrates the sufficient stability of TSA. Furthermore, topological and kinetic analysis were conducted to determine the nucleation potential of TSA. Atmospheric clusters formed by TSA and atmospheric nucleation precursors (SA, ammonia NH3, and dimethylamine DMA) were thermodynamically stable. Moreover, the gradually decreasing evaporation coefficients for TSA-base clusters, particularly for TSA-DMA, suggests that TSA may participate in NPF where the concentration of base molecules are relatively higher. The present new reaction mechanism may contributes to a better understanding of atmospheric sulfur cycle and NPF.

Engineering d-p Orbital Hybridization with P, S Co-Coordination Asymmetric Configuration of Single Atoms Toward High-Rate and Long-Cycling Lithium-Sulfur Battery.

Single-atom catalysts (SACs) have been increasingly explored in lithium-sulfur (Li-S) batteries to address the issues of severe polysulfide shuttle effects and sluggish redox kinetics. However, the structure-activity relationship between single-atom coordination structures and the performance of Li-S batteries remain unclear. In this study, a P, S co-coordination asymmetric configuration of single atoms is designed to enhance the catalytic activity of Co central atoms and promote d-p orbital hybridization between Co and S atoms, thereby limiting polysulfides and accelerating the bidirectional redox process of sulfur. The well-designed SACs enable Li-S batteries to demonstrate an ultralow capacity fading rate of 0.027% per cycle after 2000 cycles at a high rate of 5 C. Furthermore, they display excellent rate performance with a capacity of 619 mAh g-1 at an ultrahigh rate of 10 C due to the efficient catalysis of CoSA-N3PS. Importantly, the assembled pouch cell still retains a high discharge capacity of 660 mAh g-1 after 100 cycles at 0.2 C and provides a high areal capacity of 4.4 mAh cm-2 even with a high sulfur loading of 6 mg cm-2. This work demonstrates that regulating the coordination environment of SACs is of great significance for achieving state-of-the-art Li-S batteries.

Orthogonal Persulfide Generation through Precision Tools Provides Insights into Mitochondrial Sulfane Sulfur.

The sulfane sulfur pool, comprised of persulfide (RS-SH) and polysulfide (RS-SnH) derived from hydrogen sulfide (H2S), has emerged as a major player in redox biochemistry. Mitochondria, besides energy generation, serve as significant cellular redox hubs, mediate stress response and cellular health. However, the effects of endogenous mitochondrial sulfane sulfur (MSS) remain largely uncharacterized as compared with their cytosolic counterparts, cytosolic sulfane sulfur (CSS). To investigate this, we designed a novel artificial substrate for mitochondrial 3-mercaptopyruvate sulfurtransferase (3-MST), a key enzyme involved in MSS biosynthesis. Using cells expressing a mitochondrion-localized persulfide biosensor, we demonstrate this tool's ability to selectively enhance MSS. While H2S was previously known to suppress human immunodeficiency virus (HIV-1), we found that MSS profoundly affected the HIV-1 life cycle, mediating viral reactivation from latency. Additionally, we provide evidence for the role of the host's mitochondrial redox state, membrane potential, apoptosis, and respiration rates in managing HIV-1 latency and reactivation. Together, dynamic fluctuations in the MSS pool have a significant and possibly conflicting effect on HIV-1 viral latency. The precision tools developed herein allow for orthogonal generation of persulfide within both mitochondria and the cytosol and will be useful in interrogating disease biology.

All-Solid-State Lithium-Sulfur Batteries of High Cycling Stability and Rate Capability Enabled by a Self-Lithiated Sn-C Interlayer.

All-solid-state lithium-sulfur batteries (ASSLSBs) have attracted intense interest due to their high theoretical energy density and intrinsic safety. However, constructing durable lithium (Li) metal anodes with high cycling efficiency in ASSLSBs remains challenging due to poor interface stability. Here, a compositionally stable, self-lithiated tin (Sn)-carbon (C) composite interlayer (LSCI) between Li anode and solid-state electrolyte (SSE), capable of homogenizing Li-ion transport across the interlayer, mitigating decomposition of SSE, and enhancing electrochemical/structural stability of interface, is developed for ASSLSBs. The LSCI-mediated Li metal anode enables stable Li plating/stripping over 7000 h without Li dendrite penetration. The ASSLSBs equipped with LSCI thus exhibit excellent cycling stability of over 300 cycles (capacity retention of ≈80%) under low applied pressure (<8 MPa) and demonstrate improved rate capability even at 3C. The enhanced electrochemical performance and corresponding insights of the designed LSCI broaden the spectrum of advanced interlayers for interface manipulation, advancing the practical application of ASSLSBs.

Electrochemically Active MoO3/TiN Sulfur Host Inducing Dynamically Reinforced Built-in Electric Field for Advanced Lithium-Sulfur Batteries.

Although various electrocatalysts have been developed to ameliorate the shuttle effect and sluggish Li-S conversion kinetics, their electrochemical inertness limits the sufficient performance improvement of lithium-sulfur batteries (LSBs). In this work, an electrochemically active MoO3/TiN-based heterostructure (MOTN) is designed as an efficient sulfur host that can improve the overall electrochemical properties of LSBs via prominent lithiation behaviors. By accommodating Li ions into MoO3 nanoplates, the MOTN host can contribute its own capacity. Furthermore, the Li intercalation process dynamically affects the electronic interaction between MoO3 and TiN and thus significantly reinforces the built-in electric field, which further improves the comprehensive electrocatalytic abilities of the MOTN host. Because of these merits, the MOTN host-based sulfur cathode delivers an exceptional specific capacity of 2520 mA h g-1 at 0.1 C. Furthermore, the cathode exhibits superior rate capability (564 mA h g-1 at 5 C), excellent cycling stability (capacity fade rate of 0.034% per cycle for 1200 cycles at 2 C), and satisfactory areal capacity (6.6 mA h cm-2) under a high sulfur loading of 8.3 mg cm-2. This study provides a novel strategy to develop electrochemically active heterostructured electrocatalysts and rationally manipulate the built-in electric field for achieving high-performance LSBs.

Synergistic manipulation of sulfur vacancies and palladium doping of In2S3 for enhanced photocatalytic H2 production.

In this study, a simple one-pot synthesis process is employed to introduce Pd dopant and abundant S vacancies into In2S3 nanosheets. The optimized Pd-doped In2S3 photocatalyst, with abundant S vacancies, demonstrates a significant enhancement in photocatalytic hydrogen evolution. The joint modification of Pd doping and rich S vacancies on the band structure of In2S3 result in an improvement in both the light absorption capacity and proton reduction ability. It is worth noting that photogenerated electrons enriched by S vacancies can rapidly migrate to adjacent Pd atoms through an efficient transfer path constructed by Pd-S bond, effectively suppressing the charge recombination. Consequently, the dual-defective In2S3 shows an efficient photocatalytic H2 production rate of 58.4 ± 2.0 µmol·h-1. Additionally, further work has been conducted on other ternary metal sulfide, ZnIn2S4. Our findings provide a new insight into the development of highly efficient photocatalysts through synergistic defect engineering.

pH and thiosulfate dependent microbial sulfur oxidation strategies across diverse environments.

Sulfur oxidizing bacteria (SOB) play a key role in sulfur cycling in mine tailings impoundment (TI) waters, where sulfur concentrations are typically high. However, our understanding of SOB sulfur cycling via potential S oxidation pathways (sox, rdsr, and S4I) in these globally ubiquitous contexts, remains limited. Here, we identified TI water column SOB community composition, metagenomics derived metabolic repertoires, physicochemistry, and aqueous sulfur concentration and speciation in four Canadian base metal mine, circumneutral-alkaline TIs over four years (2016 - 2019). Identification and examination of genomes from nine SOB genera occurring in these TI waters revealed two pH partitioned, metabolically distinct groups, which differentially influenced acid generation and sulfur speciation. Complete sox (csox) dominant SOB (e.g., Halothiobacillus spp., Thiomonas spp.) drove acidity generation and S2O3 2- consumption via the csox pathway at lower pH (pH ~5 to ~6.5). At circumneutral pH conditions (pH ~6.5 to ~8.5), the presence of non-csox dominant SOB (hosting the incomplete sox, rdsr, and/or other S oxidation reactions; e.g. Thiobacillus spp., Sulfuriferula spp.) were associated with higher [S2O3 2-] and limited acidity generation. The S4I pathway part 1 (tsdA; S2O3 2- to S4O6 2-), was not constrained by pH, while S4I pathway part 2 (S4O6 2- disproportionation via tetH) was limited to Thiobacillus spp. and thus circumneutral pH values. Comparative analysis of low, natural (e.g., hydrothermal vents and sulfur hot springs) and high (e.g., Zn, Cu, Pb/Zn, and Ni tailings) sulfur systems literature data with these TI results, reveals a distinct TI SOB mining microbiome, characterized by elevated abundances of csox dominant SOB, likely sustained by continuous replenishment of sulfur species through tailings or mining impacted water additions. Our results indicate that under the primarily oxic conditions in these systems, S2O3 2- availability plays a key role in determining the dominant sulfur oxidation pathways and associated geochemical and physicochemical outcomes, highlighting the potential for biological management of mining impacted waters via pH and [S2O3 2-] manipulation.

Application of sulfur-based products reduces Halyomorpha halys infestation and damage in pome fruit orchards.

BACKGROUND: The brown marmorated stink bug, Halyomorpha halys (Stål, 1855) (Hemiptera: Pentatomidae) is an invasive pest that causes economic damage on crops, decreasing fruit yield and quality. Conventional insecticides are frequently used to reduce infestations, but these are often with a limited residual effect, besides being costly and detrimental to nontarget organisms and the environment. In integrated pest management, novel strategies against H. halys are proposed, such as the use of alternative substances with an effect on insect behaviour and mobility. As one of the oldest multi-site fungicides applied against fungal pathogens and as an insecticide and acaricide to control scales and mites, sulfur is proposed here to reduce H. halys infestation in fruit orchards. RESULTS: Field experiments were performed to evaluate the effect of repeated wettable sulfur applications on H. halys in apple and pear orchards. Sulfur-induced plant phytotoxicity effects and quanti-qualitative parameters on apple fruits were also recorded. Halyomorpha halys infestation was significantly reduced in sulfur-treated compared to untreated pears and apples. Furthermore, sulfur sprays reduced fruit damage caused by H. halys. Besides, sulfur-mediated phytotoxicity such as symptoms on leaves and fruit drop were not observed. Fruit quality was not influenced by sulfur treatments. CONCLUSIONS: Wettable sulfur seems to be a promising formulation given the low phytotoxicity, considering the technical aspects for an effective use of sulfur-based products to counteract H. halys in pome fruit orchards. © 2024 The Author(s). Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

A novel transcription factor Sdr1 involving sulfur depletion response in fission yeast.

In the fission yeast Schizosaccharomyces pombe, the response to sulfur depletion has been less studied compared to the response to nitrogen depletion. Our study reveals that the fission yeast gene, SPCC417.09c, plays a significant role in the sulfur depletion response. This gene encodes a protein with a Zn2Cys6 fungal-type DNA-binding domain and a transcription factor domain, and we have named it sdr1+ (sulfur depletion response 1). Interestingly, while sulfur depletion typically induces autophagy akin to nitrogen depletion, we found that autophagy was not induced under sulfur depletion in the absence of sdr1+. This suggests that sdr1+ is necessary for the induction of autophagy under conditions of sulfur depletion. Although sdr1+ is not essential for the growth of fission yeast, its overexpression, driven by the nmt1 promoter, inhibits growth. This implies that Sdr1 may possess cell growth-inhibitory capabilities. In addition, our analysis of Δsdr1 cells revealed that sdr1+ also plays a role in regulating the expression of genes associated with the phosphate depletion response. In conclusion, our study introduces Sdr1 as a novel transcription factor that contributes to an appropriate cellular nutrient starvation response. It does so by inhibiting inappropriate cell growth and inducing autophagy in response to sulfur depletion.

Profiles of volatile sulfur compounds in various vegetables consumed in Korea using HS-SPME-GC/MS technique.

Volatile sulfur compounds (VSCs) are not only important for their therapeutic potential but also significantly influence the flavor profiles of agricultural products. VSCs exhibit various chemical structures due to their stability and volatility, and they may form or be altered as a result of enzymatic and chemical reactions during storage and cooking. This study has focused on profiles of VSCs in 58 different vegetable samples by using HS-SPME-GC/MS technique and chemometric analyses. The validation was carried out using cabbage juice as a vegetable matrix for VSCs analysis, showing satisfactory repeatability (RSD 8.07% ~ 9.45%), reproducibility (RSD 4.22% ~ 7.71%), accuracy and specificity. The established method was utilized on various vegetables, revealing that 21 VSCs such as sulfides, disulfides, trisulfides, isothiocyanates, sulfhydryls, and thiophenes were successfully identified and quantified. These compounds were found in a range of vegetables including Allium species, Cruciferae, Capsicum species, green leafy vegetables, and mushrooms. In particular, isocyanate and allyl groups were abundant in Cruciferae and Allium vegetables, respectively. Cooking conditions were shown to reduce the levels of certain sulfur compounds such as dimethyl sulfide and dimethyl trisulfide in vegetables like broccoli and cabbage, suggesting that heat treatment can lead to the volatilization and reduction of these compounds. The present study provides reliable insights into the compositions of VSCs in various vegetables and examines the changes induced by different cooking methods.

Fabrication of A Multi-functional Separator Incorporating Crown ether- Polyoxometalate Supramolecular Compound for Lithium-Sulfur Batteries.

Recently, research on polyoxometalates (POMs) has gained significant momentum. Owing to their properties as electronic sponges, POMs catalyst harbor substantial potential in lithium-sulfur battery research. However, POMs undergo a transformation into reduced heteropoly blue (HPB) during electrochemical reactions, which then dissolve into the electrolyte, resulting in catalyst loss. In this research, we amalgamated 18-crown-6 (CR6) with K3PW12O40, (KPW), synthesized a novel POM-based supramolecular compound, and integrated it with graphene oxide (GO) to fabricate a multi-functional composite polypropylene (PP) separator KPW-CR6/GO/PP. The crown ether array was employed to immobilize POM and construct ion transport channels, thereby enhancing the Li+ migration rate and capturing polysulfides. Subsequently, leveraging the stable structure and redox properties of POM, the polysulfide is catalyzed to transform and inhibit the shuttle effect, thereby protecting the Li anode. The lithium-sulfur batteries with the Crown ether-POM supramolecular compound separators, exhibit enhanced capacity and stability (1073.3 mAh g-1 at 1.0 C, and 81.5% retention rate after 250 cycles). The battery (S loading: 3.2 mg cm-2) presents an initial specific discharge capacity of 543.4 mAh g-1 at 0.5 C, with 89.8% of the capacity retained after 160 cycles. This underlines the practical application potential of Crown ether-POM supramolecular materials in Li-S batteries.

High-Performance Yet Sustainable Triboelectric Nanogenerator Based on Sulfur-Rich Polymer Composite with MXene Segregated Structure.

State-of-the-art triboelectric nanogenerators (TENGs) typically employ fluoropolymers, highly negative chargeable materials in triboelectric series. However, many researchers nowadays are concerned about environmental pollution caused by poly-and per-fluoroalkyl substances (PFAS) due to their critical immunotoxicity as fluoropolymers are likely to release PFAS into the ecosystem during their life cycle. Herein, a sulfur-rich polymer (SRP)/MXene composite, offering high-performance yet sustainable TENG is developed. Value-addition of sulfur into SRP-based TENG has huge advantages since sulfur is abundant waste from petroleum refining and possesses the highest electron affinity (-200 kJ mol-1) among polymerizable atoms. MXene segregated structure is introduced into SRP to achieve homogeneous distribution without electrical percolation by utilizing below 0.5 wt% of MXene, resulting in a significantly enhanced dielectric constant without a drastic increase of dielectric loss. Due to homogeneous MXene distribution, SRP/MXene composite-based TENG demonstrates 2.9 times and 19.5 times enhances peak voltage and peak current compared to previous SRP-based TENGs. Additionally, it exhibits reusability without critical reduction of modulus and TENG performance due to dynamically exchangeable disulfide bonds. Finally, after the corona discharging and scaling-up process to a 4-inch wafer size, SRP/MXene composite-based TENG exhibits an 8.4 times improvement in peak power density, reaching 3.80 W m-2 compared to previous SRP-based TENGs.

Immobilization and Catalytic Conversion of Polysulfide by In-Situ Generated Nickel in Hollow Carbon Fibers for High-Rate Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are considered promising energy-storage systems because of their high theoretical energy density, low cost, and eco-friendliness. However, problems such as the shuttle effect can result in the loss of active materials, poor cyclability, and rapid capacity degradation. The utilization of a structural configuration that enhances electrochemical performance via dual adsorption-catalysis strategies can overcome the limitations of Li-S batteries. In this study, an integrated interlayer structure, in which hollow carbon fibers (HCFs) were modified with in-situ-generated Ni nanoparticles, was prepared by scalable one-step carbonization. Highly hierarchically porous HCFs act as the carbon skeleton and provide a continuous three-dimensional conductive network that enhances ion/electron diffusion. Ni nanoparticles with superior anchoring and catalytic abilities can prevent the shuttle effect and increase the conversion rate, thereby promoting the electrochemical performance. This synergistic effect resulted in a high capacity retention of 582 mAh g-1 at 1 C after 100 cycles, providing an excellent rate capability of up to 3 C. The novel structure, wherein Ni nanoparticles are embedded in cotton-tissue-derived HCFs, provides a new avenue for enhancing electrochemical performance at high C rates. This results in a low-cost, sustainable, and high-performance hybrid material for the development of practical Li-S batteries.

Sulfenylation of ERK1/2: A novel mechanism for SO2-mediated inhibition of cardiac fibroblast proliferation.

Background: Endogenous sulfur dioxide (SO2) plays a crucial role in protecting heart from myocardial fibrosis by inhibiting the excessive growth of cardiac fibroblasts. This study aimed to investigate potential mechanisms by which SO2 suppressed myocardial fibrosis. Methods and results: Mouse model of angiotensin II (Ang II)-induced cardiac fibrosis and cell model of Ang II-stimulated cardiac fibroblast proliferation were employed. Our findings discovered that SO2 mitigated the aberrant phosphorylation of extracellular signal-regulated kinase 1/2 (ERK1/2) induced by Ang II, leading to a reduction of fibroblast proliferation. Mechanistically, for the first time, we found that SO2 sulfenylated ERK1/2, and inhibited ERK1/2 phosphorylation and cardiac fibroblast proliferation, while a sulfhydryl reducing agent dithiothreitol (DTT) reversed the above effects of SO2. Furthermore, mutant ERK1C183S (cysteine 183 to serine) abolished the sulfenylation of ERK by SO2, thereby preventing the inhibitory effects of SO2 on ERK1 phosphorylation and cardiac fibroblast proliferation. Conclusion: Our study suggested that SO2 inhibited cardiac fibroblast proliferation by sulfenylating ERK1/2 and subsequently suppressing ERK1/2 phosphorylation. These new findings might enhance the understanding of the mechanisms underlying myocardial fibrosis and emphasize the potential of SO2 as a novel therapeutic target for myocardial fibrosis.

Sulfur and Wavy-Stacking Boosted Superior Lithium Storage in 2D Covalent Organic Frameworks.

2D conjugated covalent organic frameworks (c-COFs) provide an attractive foundation as organic electrodes in energy storage devices, but their storage capability is long hindered by limited ion accessibility within densely π-π stacked interlayers. Herein, two kinds of 2D c-COFs based on dioxin and dithiine linkages are reported, which exhibit distinct in-plane configurations-fully planar and undulated layers. X-ray diffraction analysis reveals wavy square-planar networks in dithiine-bridged COF (COF-S), attributed to curved C─S─C bonds in the dithiine linkage, whereas dioxin-bridged COF (COF-O) features densely packed fully planar layers. Theoretical and experimental results elucidate that the undulated stacking within COF-S possesses an expanded layer distance of 3.8 Å and facilitates effective and rapid Li+ storage, yielding a superior specific capacity of 1305 mAh g-1 at 0.5 A g-1, surpassing that of COF-O (1180 mAh g-1 at 0.5 A g-1). COF-S also demonstrates an admirable cycle life with 80.4% capacity retention after 5000 cycles. As determined, self-expanded wavy-stacking geometry, S-enriched dithiine in COF-S enhances the accessibility and redox activity of Li storage, allowing each phthalocyanine core to store 12 Li+ compared to 8 Li+ in COF-O. These findings underscore the elements and stacking modes of 2D c-COFs, enabling tunable layer distance and modulation of accessible ions.

Unveiling the Reaction Mystery Between Lithium Polysulfides and Lithium Metal Anode in Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are widely regarded as one of the most promising next-generation high-energy-density energy storage devices. However, soluble lithium polysulfides (LiPSs) corrode Li metal and deteriorate the cycling stability of Li-S batteries. Understanding the reaction mechanism between LiPSs and Li metal anode is imperative. Herein, the reaction rate and products of LiPSs with Li metal anode, the composition and structure of the as-generated solid electrolyte interphase (SEI), and the mechanism of lithium nitrate (LiNO3) additives for inhibiting the corrosion reactions are systematically unveiled. Concretely, LiPSs react with Li metal anode more rapidly than Li salt and generate a Li2S-rich SEI. The Li2S-rich SEI is highly reactive with LiPSs, which exacerbates the formation of dendritic Li and the continuous corrosion of active Li. LiNO3 functions dominantly by modulating the solvation structure of LiPSs and inherently reducing the reactivity of LiPSs, rather than the conventional understanding of LiNO3 participating in the formation of SEI. This work reveals the reaction mechanism between LiPSs and Li metal anode and inspires rational regulating of the solvation structure of LiPSs for stabilizing Li metal anode in Li-S batteries.

Stabilization Strategies of Lithium Metal Anode Toward Dendrite-Free Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are considered as a most promising rechargeable lithium metal batteries because of their high energy density and low cost. However, the Li-S batteries mainly suffer the capacity decay issue caused by the shutting effect of lithium polysulfides and the safety issues arising from the Li dendrites formation. This review outlines the current issues of Li-S batteries. Furthermore, we comprehensively summarized the challenges encountered by Li anode in Li-S batteries, such as the heterogeneous deposition of the Li anode, the unstable solid electrolyte interface (SEI) layer, and volume expansion. Moreover, research progresses in the stabilization strategies of Li anodes (physical approaches, optimization of electrolyte, surface protection layer, and design of current collector) is discussed in detail. Lastly, the remaining challenges and future research directions of Li metal anode stabilization in Li-S batteries are also present.

Unveiling the importance of the C-terminus in the sugar acid dehydratase of the IlvD/EDD superfamily.

Microbial non-phosphorylative oxidative pathways present promising potential in the biosynthesis of platform chemicals from the hemicellulosic fraction of lignocellulose. An L-arabinonate dehydratase from Rhizobium leguminosarum bv. trifolii catalyzes the rate-limiting step in the non-phosphorylative oxidative pathways, that is, converts sugar acid to 2-dehydro-3-deoxy sugar acid. We have shown earlier that the enzyme forms a dimer of dimers, in which the C-terminal histidine residue from one monomer participates in the formation of the active site of an adjacent monomer. The histidine appears to be conserved across the sequences of sugar acid dehydratases. To study the role of the C-terminus, five variants (H579A, H579F, H579L, H579Q, and H579W) were produced. All variants showed decreased activity for the tested sugar acid substrates, except the variant H579L on D-fuconate, which showed about 20% increase in activity. The reaction kinetic data showed that the substrate preference was slightly modified in H579L compared to the wild-type enzyme, demonstrating that the alternation of the substrate preference of sugar acid dehydratases is possible. In addition, a crystal structure of H579L was determined at 2.4 Å with a product analog 2-oxobutyrate. This is the first enzyme-ligand complex structure from an IlvD/EDD superfamily enzyme. The binding of 2-oxobutyrate suggests how the substrate would bind into the active site in the orientation, which could lead to the dehydration reaction. KEY POINTS: • Mutation of the last histidine at the C-terminus changed the catalytic activity of L-arabinonate dehydratase from R. leguminosarum bv. trifolii against various C5/C6 sugar acids. • The variant H579L of L-arabinonate dehydratase showed an alteration of substrate preferences compared with the wild type. • The first enzyme-ligand complex crystal structure of an IlvD/EDD superfamily enzyme was solved.

Precise Design of a 0.8 nm Pore Size in a Separator Interfacial Layer Inspired by a Sieving Effect toward Inhibiting Polysulfide Shuttling and Promoting Li+ Diffusion.

The incomplete blocking of small-sized polysulfides by pore size and the effect on Li+ transport are generally neglected when the size-sieving effect is employed to suppress the shuttling of polysulfides. Herein, ion-selective modified layers with pore sizes equal to, greater than, and less than 0.8 nm, respectively, on the polypropylene separator are fabricated to obtain the preferable pore size for separation of polysulfides and Li+. As a result, the modified layer with a pore size of 0.8 nm can efficiently inhibit the shuttling of polysulfides and simultaneously boost the diffusion of Li+ under the double effect of the size advantage and electrostatic shielding. Consequently, the battery using a separator with a modified layer having a pore size of 0.8 nm possesses a lower capacity attenuation of 0.047% after 1000 cycles at 2.0 C. This work serves as a vital guide for suppressing polysulfide shuttle using ion-selective sieving effects for lithium-sulfur batteries.

Use of vine-shoots stilbene extract to the reduction of SO2 in red and rosé Italian wine: Effect on phenolic, volatile, and sensory profiles.

Sulfur dioxide (SO2) is one of the most used additives in wine industry for its antioxidant and antimicrobial activity. However, due to health concerns, consumers' demand of wines with either reduced or totally replaced SO2 has increased. This study aimed to assess the effect of partial and total replacement of SO2 with a vine-shoots extract rich in stilbenes in rosé (cv. Sangiovese) and red (cv. Negramaro) wines respectively. Color as well as phenolic, volatile, and sensory profiles of wines were evaluated at bottling and during storage. The results showed that the vine-shoots extract increased the levels of trans-resveratrol, catechin, and gallic acid in wines. Moreover, the positive correlation of procyanidin dimers in red wine suggested an increase of the polymerization reactions. The amount of added extract probably provided lower antimicrobial protection compared to SO2, as indicated by the higher levels of ethyl phenol. The decrease of individual anthocyanins and oxidation aldehydes observed in wines with SO2 replacement and the higher levels of caftaric acid in the rosé wine with the extract suggested a shift of the oxidative protection, with a lower protection towards anthocyanin degradation and higher protection towards carbonyl formation and oxidation of readily oxidizable phenolic acids.