A Dynamic Trust evaluation and update model using advance decision tree for underwater Wireless Sensor Networks.

Underwater wireless sensor networks (UWSNs) are an emerging research area that is rapidly gaining popularity. However, it has several challenges, including security, node mobility, limited bandwidth, and high error rates. Traditional trust models fail to adapt to the dynamic underwater environment. Thus, to address these issues, we propose a dynamic trust evaluation and update model using a modified decision tree algorithm. Unlike baseline methods, which often rely on static and generalized trust evaluation approaches, our model introduces several innovations tailored specifically for UWSNs. These include energy-aware decision-making, real-time adaptation to environmental changes, and the integration of multiple underwater-specific factors such as water currents and acoustic signal properties. Our model enhances trust accuracy, reduces energy consumption, and lowers data overhead, achieving a 96% accuracy rate with a 2% false positive rate. Additionally, it outperforms baseline models by improving energy efficiency by 50 mW and reducing response time to 20 ms per packet. These innovations demonstrate the proposed model's effectiveness in addressing the unique challenges of UWSNs, ensuring both security and operational efficiency goals. The proposed model effectively enhances the trust evaluation process in UWSNs, providing both security and operational benefits. These key findings validate the potential of integrating modified decision tree algorithms to improve the performance and sustainability of UWSNs.

Research on the Performance of Thermoelectric Self-Powered Systems for Wireless Sensor Based on Industrial Waste Heat.

The issue of energy supply for wireless sensors is becoming increasingly severe with the advancement of the Fourth Industrial Revolution. Thus, this paper proposed a thermoelectric self-powered wireless sensor that can harvest industrial waste heat for self-powered operations. The results show that this self-powered wireless sensor can operate stably under the data transmission cycle of 39.38 s when the heat source temperature is 70 °C. Only 19.57% of electricity generated by a thermoelectric power generation system (TPGS) is available for use. Before this, the power consumption of this wireless sensor had been accurately measured, which is 326 mW in 0.08 s active mode and 5.45 µW in dormant mode. Then, the verified simulation model was established and used to investigate the generation performance of the TPGS under the Dirichlet, Neumann, and Robin boundary conditions. The minimum demand for a heat source is cleared for various data transmission cycles of wireless sensors. Low-temperature industrial waste heat is enough to drive the wireless sensor with a data transmission cycle of 30 s. Subsequently, the economic benefit of the thermoelectric self-powered system was also analyzed. The cost of one thermoelectric self-powered system is EUR 9.1, only 42% of the high-performance battery cost. Finally, the SEPIC converter model was established to conduct MPPT optimization for the TEG module and the output power can increase by up to approximately 47%. This thermoelectric self-powered wireless sensor can accelerate the process of achieving energy independence for wireless sensors and promote the Fourth Industrial Revolution.

Wireless sensor network-based machine learning framework for smart cities in intelligent waste management.

Environmental safety is one of the key issues that are directly related to a country's prosperity. One of the most fundamental aspects of a sustainable economy is waste management and recycling. Better recycling safety and efficiency may be achieved via the use of intelligent devices rather than manual effort. In this research, we describe a machine learning-based architecture for smart trash collection and sorting using the Internet of Things and wireless sensor networks. The goal of this study was to develop an autonomous method for producing an efficient and intelligent waste parameter monitoring system for a novel waste management system, using the Internet of Things (IoT) and Long Range (LoRa) technologies. Several possibilities are explored, all of which may be applied to the development of the three nodes. The number of trash cans, garbage stench, air quality, weight, smoke levels, and waste categories are all tracked in real-time via the Internet of Things and the Thing Speak Cloud Platform, which can be set up in numerous places. In the end, a fog layer-deployed intelligent waste classification framework consists mostly of four layers: input, feature, classification, and output. Using the Thrash Box dataset, the proposed system develops a categorization method into trash classes such as household, medical, and electronic garbage, in addition to object identification. Traditional machine learning methods, such as the multi-kernel support vector machine (SVM) and the Adaboost ensemble classifier, are employed in the classification layer, while the Resnet-101 deep convolutional neural network model is used in the feature layer. Experiments were conducted to evaluate the suggested method's ability to classify garbage and provide accurate predictions about their respective categories. Compared to other state-of-the-art models, the suggested method's performance was shown to be superior in the presented trials.

On the Reliability of Wireless Sensor Networks with Multiple Sinks.

The convergence of heterogeneous wireless sensor networks provides many benefits, including increased coverage, flexible load balancing capabilities, more efficient use of network resources, and the provision of additional data by different types of sensors, thus leading to improved customer service based on more complete information. However, despite these advances, the challenge of ensuring reliability and survivability remains due to low-cost sensor requirements and the inherent unreliability of the wireless environment. Integrating different sensor networks and unifying protocols naturally leads to the creation of a network with multiple sinks, necessitating the exploration of new approaches to rational reliability assurance. The failure of some sensors does not necessarily lead to a shutdown of the network, since other sensors can duplicate information and deliver data to sinks via an increased number of alternative routes. In this paper, the reliability indicator is defined as the probability that sinks can collect data from a given number of sensors. In this context, a dedicated reliability metric is introduced and examined for its effectiveness. This metric is computed using an algorithm rooted in the modified factoring method. Furthermore, we introduce a heuristic algorithm designed for optimal sink placement in wireless sensor networks to achieve the highest level of network reliability.

Optimizing Rule Weights to Improve FRBS Clustering in Wireless Sensor Networks.

Wireless sensor networks (WSNs) are usually composed of tens or hundreds of nodes powered by batteries that need efficient resource management to achieve the WSN's goals. One of the techniques used to manage WSN resources is clustering, where nodes are grouped into clusters around a cluster head (CH), which must be chosen carefully. In this article, a new centralized clustering algorithm is presented based on a Type-1 fuzzy logic controller that infers the probability of each node becoming a CH. The main novelty presented is that the fuzzy logic controller employs three different knowledge bases (KBs) during the lifetime of the WSN. The first KB is used from the beginning to the instant when the first node depletes its battery, the second KB is then applied from that moment to the instant when half of the nodes are dead, and the last KB is loaded from that point until the last node runs out of power. These three KBs are obtained from the original KB designed by the authors after an optimization process. It is based on a particle swarm optimization algorithm that maximizes the lifetime of the WSN in the three periods by adjusting each rule in the KBs through the assignment of a weight value ranging from 0 to 1. This optimization process is used to obtain better results in complex systems where the number of variables or rules could make them unaffordable. The results of the presented optimized approach significantly improved upon those from other authors with similar methods. Finally, the paper presents an analysis of why some rule weights change more than others, in order to design more suitable controllers in the future.

Improved Cell Allocation Strategies Using K-Means Clustering in Congested 6TiSCH Environments.

The 6TiSCH protocol (IEEE 802.15.4e) is crucial for the Industrial Internet of Things (IIoT), utilizing a time-slotted channel hopping (TSCH) mode based on node distribution. In this study, we propose an innovative cell allocation strategy based on node position clustering using the K-means algorithm, specifically designed to address congestion and optimize resource distribution in the 6TiSCH network. Our mechanism effectively groups nodes into clusters, allowing for dynamic adjustment of cell capacities in congested areas by analyzing traffic patterns and the spatial distribution of nodes. This clustering approach enhances the efficiency of slot frame utilization and minimizes communication delays by reducing interference and improving routing stability. The proposed strategy leverages the clustering results to improve cell usage efficiency and reduce communication latency between nodes. By tailoring cell allocation to the specific traffic needs of each cluster, we significantly reduce packet loss, manage congestion more effectively, and enhance data transmission reliability. We evaluated the clustering method using the K-means algorithm through experiments with the 6TiSCH simulator. Additionally, we considered using objective functions in Routing Protocol for Low-Power and Lossy Networks (RPL), such as OF0 and MRHOF, to assess clustering results and their impact on throughput and packet delivery. Our method resulted in significantly improved average performance metrics. Under the OF0 routing protocol, we achieved a 30.01% latency reduction, a 15.95% faster joining time, an 8% higher packet delivery ratio, and a 13.82% throughput increase. Similarly, we observed a 12.34% improvement in packet delivery ratio, 21.06% latency reduction, 12.68% faster joining time, and 25.97% higher throughput speed with the MRHOF routing protocol. These findings highlight the effectiveness of the improved cell allocation strategy in congested 6TiSCH environments, offering a better solution for enhancing network performance in IIoT applications.

Node Role Selection and Rotation Scheme for Energy Efficiency in Multi-Level IoT-Based Heterogeneous Wireless Sensor Networks (HWSNs).

The emergence of Internet of Things (IoT)-based heterogeneous wireless sensor network (HWSN) technology has become widespread, playing a significant role in the development of diverse human-centric applications. The role of efficient resource utilisation, particularly energy, becomes further critical in IoT-based HWSNs than it was in WSNs. Researchers have proposed numerous approaches to either increase the provisioned resources on network devices or to achieve efficient utilisation of these resources during network operations. The application of a vast proportion of such methods is either limited to homogeneous networks or to a single parameter and limited-level heterogeneity. In this work, we propose a multi-parameter and multi-level heterogeneity model along with a cluster-head rotation method that balances energy and maximizes lifetime. This method achieves up to a 57% increase in throughput to the base station, owing to improved intra-cluster communication in the IoT-based HWSN. Furthermore, for inter-cluster communication, a mathematical framework is proposed that first assesses whether the single-hop or multi-hop inter-cluster communication is more energy efficient, and then computes the region where the next energy-efficient hop should occur. Finally, a relay-role rotation method is proposed among the potential next-hop nodes. Results confirm that the proposed methods achieve 57.44%, 51.75%, and 17.63% increase in throughput of the IoT-based HWSN as compared to RLEACH, CRPFCM, and EERPMS, respectively.

Edge Computing and Fault Diagnosis of Rotating Machinery Based on MobileNet in Wireless Sensor Networks for Mechanical Vibration.

With the rapid development of the Industrial Internet of Things in rotating machinery, the amount of data sampled by mechanical vibration wireless sensor networks (MvWSNs) has increased significantly, straining bandwidth capacity. Concurrently, the safety requirements for rotating machinery have escalated, necessitating enhanced real-time data processing capabilities. Conventional methods, reliant on experiential approaches, have proven inefficient in meeting these evolving challenges. To this end, a fault detection method for rotating machinery based on mobileNet in MvWSNs is proposed to address these intractable issues. The small and light deep learning model is helpful to realize nearly real-time sensing and fault detection, lightening the communication pressure of MvWSNs. The well-trained deep learning is implanted on the MvWSNs sensor node, an edge computing platform developed via embedded STM32 microcontrollers (STMicroelectronics International NV, Geneva, Switzerland). Data acquisition, data processing, and data classification are all executed on the computing- and energy-constrained sensor node. The experimental results demonstrate that the proposed fault detection method can achieve about 0.99 for the DDS dataset and an accuracy of 0.98 in the MvWSNs sensor node. Furthermore, the final transmission data size is only 0.1% compared to the original data size. It is also a time-saving method that can be accomplished within 135 ms while the raw data will take about 1000 ms to transmit to the monitoring center when there are four sensor nodes in the network. Thus, the proposed edge computing method shows good application prospects in fault detection and control of rotating machinery with high time sensitivity.

Energy-Efficient Clustering in Wireless Sensor Networks Using Grey Wolf Optimization and Enhanced CSMA/CA.

Survivability is a critical concern in WSNs, heavily influenced by energy efficiency. Addressing severe energy constraints in WSNs requires solutions that meet application goals while prolonging network life. This paper presents an Energy Optimization Approach (EOAMRCL) for WSNs, integrating the Grey Wolf Optimization (GWO) for enhanced performance. EOAMRCL aims to enhance energy efficiency by selecting the optimal duty-cycle schedule, transmission power, and routing paths. The proposed approach employs a centralized strategy using a hierarchical network architecture. During the cluster formation phase, an objective function, augmented with GWO, determines the ideal cluster heads (CHs). The routing protocol then selects routes with minimal energy consumption for data transmission to CHs, using transmission power as a metric. In the transmission phase, the MAC layer forms a duty-cycle schedule based on cross-layer routing information, enabling nodes to switch between active and sleep modes according to their network allocation vectors (NAVs). This process is further optimized by an enhanced CSMA/CA mechanism, which incorporates sleep/activate modes and pairing nodes to alternate between active and sleep states. This integration reduces collisions, improves channel assessment accuracy, and lowers energy consumption, thereby enhancing overall network performance. EOAMRCL was evaluated in a MATLAB environment, demonstrating superior performance compared with EEUC, DWEHC, and CGA-GWO protocols, particularly in terms of network lifetime and energy consumption. This highlights the effectiveness of integrating GWO and the updated CSMA/CA mechanism in achieving optimal energy efficiency and network performance.

An ADPLL-Based GFSK Modulator with Two-Point Modulation for IoT Applications.

To establish ubiquitous and energy-efficient wireless sensor networks (WSNs), short-range Internet of Things (IoT) devices require Bluetooth low energy (BLE) technology, which functions at 2.4 GHz. This study presents a novel approach as follows: a fully integrated all-digital phase-locked loop (ADPLL)-based Gaussian frequency shift keying (GFSK) modulator incorporating two-point modulation (TPM). The modulator aims to enhance the efficiency of BLE communication in these networks. The design includes a time-to-digital converter (TDC) with the following three key features to improve linearity and time resolution: fast settling time, low dropout regulators (LDOs) that adapt to process, voltage, and temperature (PVT) variations, and interpolation assisted by an analog-to-digital converter (ADC). It features a digital controlled oscillator (DCO) with two key enhancements as follows: ΔΣ modulator dithering and hierarchical capacitive banks, which expand the frequency tuning range and improve linearity, and an integrated, fast-converging least-mean-square (LMS) algorithm for DCO gain calibration, which ensures compliance with BLE 5.0 stable modulation index (SMI) requirements. Implemented in a 28 nm CMOS process, occupying an active area of 0.33 mm2, the modulator demonstrates a wide frequency tuning range of from 2.21 to 2.58 GHz, in-band phase noise of -102.1 dBc/Hz, and FSK error of 1.42% while consuming 1.6 mW.

Deep Learning-Based Transmitter Localization in Sparse Wireless Sensor Networks.

In the field of wireless communication, transmitter localization technology is crucial for achieving accurate source tracking. However, the extant methodologies for localization face numerous challenges in wireless sensor networks (WSNs), particularly due to the constraints posed by the sparse distribution of sensors across large areas. We present DSLoc, a deep learning-based approach for transmitter localization in sparse WSNs. Our method is based on an improved high-resolution network model in neural networks. To address localization in sparse wireless sensor networks, we design efficient feature enhancement modules, and propose to locate transmitter locations in the heatmap using an image centroid-based method. Experiments conducted on WSNs with a 0.01% deployment density demonstrate that, compared to existing deep learning models, our method significantly reduces the transmitter miss rate and improves the localization accuracy by more than double. The results indicate that the proposed method offers more accurate and robust performance in sparse WSN environments.

Enhancing Reptile search algorithm with shifted distribution estimation strategy for coverage optimization in wireless sensor networks.

The rapid development of the Internet of Things (IoT) has extensively promoted the development of Wireless Sensor Networks (WSNs), an essential technology for series displaying perception and data collected from the physical world. In densely distributed areas, sensor nodes are unevenly distributed, which leads to the network coverage build-up and the consequent efficiency and effectiveness of WSNs. To address this issue, this paper proposes a new method for WSN coverage optimization based on the Reptile Search Algorithm (RSA). In the past, the Reptile Search algorithm has been used to solve optimization problems, which means it can improve different processes. However, the RSA needs to track the trajectory of optimal individuals in each iteration, which will ignore non-optimal individuals' bioeconomic characteristics. Therefore, the paper introduces a distribution estimation strategy into the RSA framework, which can fully mine all the positional information hidden in the entire population. We selected several functions as optimization test benchmark functions to evaluate the feasibility of the proposed method. This paper compares the proposed improved RSA with the standard RSA and some traditional optimization algorithms. The result has been calculated through a series of experiments on network coverage optimization, and the change of parameters also determines the effect of the RSA in the optimization of network coverage. The simulated results of the three similar network coverage optimization experiments show that the improved RSA can be used efficiently within different scenarios.

Wireless sensor localization based on distance optimization and assistance by mobile anchor nodes: a novel algorithm.

Wireless sensor networks (WSNs) have wide applications in healthcare, environmental monitoring, and target tracking, relying on sensor nodes that are joined cooperatively. The research investigates localization algorithms for both target and node in WSNs to enhance accuracy. An innovative localization algorithm characterized as an asynchronous time-of-arrival (TOA) target is proposed by implementing a differential evolution algorithm. Unlike available approaches, the proposed algorithm employs the least squares criterion to represent signal-sending time as a function of the target position. The target node's coordinates are estimated by utilizing a differential evolution algorithm with reverse learning and adaptive redirection. A hybrid received signal strength (RSS)-TOA target localization algorithm is introduced, addressing the challenge of unknown transmission parameters. This algorithm simultaneously estimates transmitted power, path loss index, and target position by employing the RSS and TOA measurements. These proposed algorithms improve the accuracy and efficiency of wireless sensor localization, boosting performance in various WSN applications.

Energy efficient clustering and routing protocol based on quantum particle swarm optimization and fuzzy logic for wireless sensor networks.

Clustering and routing protocols play a pivotal role in reducing energy consumption and extending the lifespan of wireless sensor networks. However, optimizing energy efficiency to maximize network longevity remains a primary challenge for these protocols. This paper introduces QPSOFL, a clustering and routing protocol that integrates quantum particle swarm optimization and a fuzzy logic system to enhance energy efficiency and prolong network lifespan. QPSOFL employs an enhanced quantum particle swarm optimization algorithm to select optimal cluster heads, utilizing Sobol sequences for population diversification during initialization. Additionally, it incorporates Lévy flight and Gaussian perturbation-based position updates to prevent trapping in local optima. Benchmark experiments validate QPSOFL's efficacy compared to Harris Hawks Optimization (HHO), Grey Wolf Optimization (GWO), Particle Swarm Optimization (PSO), and Quantum Particle Swarm Optimization (QPSO), focusing on accuracy, search capability, and convergence speed. Within QPSOFL, a fuzzy logic system determines the best next-hop cluster head based on descriptors such as residual energy, energy deviation, and relay distance. Extensive simulations compare QPSOFL's performance in terms of network lifetime, throughput, energy consumption, and scalability against existing protocols E-FUCA, IHHO-F, F-GWO, and FLPSOC, demonstrating its superior performance over these counterparts.

Ultra-Low-Power Sensor Nodes for Real-Time Synchronous and High-Accuracy Timing Wireless Data Acquisition.

This paper presents an energy-efficient and high-accuracy sampling synchronization approach for real-time synchronous data acquisition in wireless sensor networks (saWSNs). A proprietary protocol based on time-division multiple access (TDMA) and deep energy-efficient coding in sensor firmware is proposed. A real saWSN model based on 2.4 GHz nRF52832 system-on-chip (SoC) sensors was designed and experimentally tested. The obtained results confirmed significant improvements in data synchronization accuracy (even by several times) and power consumption (even by a hundred times) compared to other recently reported studies. The results demonstrated a sampling synchronization accuracy of 0.8 µs and ultra-low power consumption of 15 µW per 1 kb/s throughput for data. The protocol was well designed, stable, and importantly, lightweight. The complexity and computational performance of the proposed scheme were small. The CPU load for the proposed solution was <2% for a sampling event handler below 200 Hz. Furthermore, the transmission reliability was high with a packet error rate (PER) not exceeding 0.18% for TXPWR ≥ -4 dBm and 0.03% for TXPWR ≥ 3 dBm. The efficiency of the proposed protocol was compared with other solutions presented in the manuscript. While the number of new proposals is large, the technical advantage of our solution is significant.

GTR: GAN-Based Trusted Routing Algorithm for Underwater Wireless Sensor Networks.

The transmission environment of underwater wireless sensor networks is open, and important transmission data can be easily intercepted, interfered with, and tampered with by malicious nodes. Malicious nodes can be mixed in the network and are difficult to distinguish, especially in time-varying underwater environments. To address this issue, this article proposes a GAN-based trusted routing algorithm (GTR). GTR defines the trust feature attributes and trust evaluation matrix of underwater network nodes, constructs the trust evaluation model based on a generative adversarial network (GAN), and achieves malicious node detection by establishing a trust feature profile of a trusted node, which improves the detection performance for malicious nodes in underwater networks under unlabeled and imbalanced training data conditions. GTR combines the trust evaluation algorithm with the adaptive routing algorithm based on Q-Learning to provide an optimal trusted data forwarding route for underwater network applications, improving the security, reliability, and efficiency of data forwarding in underwater networks. GTR relies on the trust feature profile of trusted nodes to distinguish malicious nodes and can adaptively select the forwarding route based on the status of trusted candidate next-hop nodes, which enables GTR to better cope with the changing underwater transmission environment and more accurately detect malicious nodes, especially unknown malicious node intrusions, compared to baseline algorithms. Simulation experiments showed that, compared to baseline algorithms, GTR can provide a better malicious node detection performance and data forwarding performance. Under the condition of 15% malicious nodes and 10% unknown malicious nodes mixed in, the detection rate of malicious nodes by the underwater network configured with GTR increased by 5.4%, the error detection rate decreased by 36.4%, the packet delivery rate increased by 11.0%, the energy tax decreased by 11.4%, and the network throughput increased by 20.4%.

Enabling Seamless Connectivity: Networking Innovations in Wireless Sensor Networks for Industrial Application.

The wide-ranging applications of the Internet of Things (IoT) show that it has the potential to revolutionise industry, improve daily life, and overcome global challenges. This study aims to evaluate the performance scalability of mature industrial wireless sensor networks (IWSNs). A new classification approach for IoT in the industrial sector is proposed based on multiple factors and we introduce the integration of 6LoWPAN (IPv6 over low-power wireless personal area networks), message queuing telemetry transport for sensor networks (MQTT-SN), and ContikiMAC protocols for sensor nodes in an industrial IoT system to improve energy-efficient connectivity. The Contiki COOJA WSN simulator was applied to model and simulate the performance of the protocols in two static and moving scenarios and evaluate the proposed novelty detection system (NDS) for network intrusions in order to identify certain events in real time for realistic dataset analysis. The simulation results show that our method is an essential measure in determining the number of transmissions required to achieve a certain reliability target in an IWSNs. Despite the growing demand for low-power operation, deterministic communication, and end-to-end reliability, our methodology of an innovative sensor design using selective surface activation induced by laser (SSAIL) technology was developed and deployed in the FTMC premises to demonstrate its long-term functionality and reliability. The proposed framework was experimentally validated and tested through simulations to demonstrate the applicability and suitability of the proposed approach. The energy efficiency in the optimised WSN was increased by 50%, battery life was extended by 350%, duplicated packets were reduced by 80%, data collisions were reduced by 80%, and it was shown that the proposed methodology and tools could be used effectively in the development of telemetry node networks in new industrial projects in order to detect events and breaches in IoT networks accurately. The energy consumption of the developed sensor nodes was measured. Overall, this study performed a comprehensive assessment of the challenges of industrial processes, such as the reliability and stability of telemetry channels, the energy efficiency of autonomous nodes, and the minimisation of duplicate information transmission in IWSNs.

Stability Analysis through a Stability Factor Metric for IQRF Mesh Sensor Networks Utilizing Merged Data Collection.

This paper introduces a novel stability metric specifically developed for IQRF wireless mesh sensor networks, emphasizing flooding routing and data collection methodologies, particularly IQRF's Fast Response Command (FRC) technique. A key feature of this metric is its ability to ensure network resilience against disruptions by effectively utilizing redundant paths in the network. This makes the metric an indispensable tool for field engineers in both the design and deployment of wireless sensor networks. Our findings provide valuable insights, demonstrating the metric's efficacy in achieving robust and reliable network operations, especially in data collection tasks. The inclusion of redundant paths as a factor in the stability metric significantly enhances its practicality and relevance. Furthermore, this research offers practical ideas for enhancing the design and management of wireless mesh sensor networks. The stability metric uniquely assesses the resilience of data collection activities within these networks, with a focus on the benefits of redundant paths, underscoring the significance of stability in network evaluation.

Low-Cost, Low-Power Edge Computing System for Structural Health Monitoring in an IoT Framework.

A complete low-power, low-cost and wireless solution for bridge structural health monitoring is presented. This work includes monitoring nodes with modular hardware design and low power consumption based on a control and resource management board called CoreBoard, and a specific board for sensorization called SensorBoard is presented. The firmware is presented as a design of FreeRTOS parallelised tasks that carry out the management of the hardware resources and implement the Random Decrement Technique to minimize the amount of data to be transmitted over the NB-IoT network in a secure way. The presented solution is validated through the characterization of its energy consumption, which guarantees an autonomy higher than 10 years with a daily 8 min monitoring periodicity, and two deployments in a pilot laboratory structure and the Eduardo Torroja bridge in Posadas (Córdoba, Spain). The results are compared with two different calibrated commercial systems, obtaining an error lower than 1.72% in modal analysis frequencies. The architecture and the results obtained place the presented design as a new solution in the state of the art and, thanks to its autonomy, low cost and the graphical device management interface presented, allow its deployment and integration in the current IoT paradigm.

Battery-Free, Wireless Multi-Modal Sensor, and Actuator Array System for Pressure Injury Prevention.

Simultaneous monitoring of critical parameters (e.g., pressure, shear, and temperature) at bony prominences is essential for the prevention of pressure injuries in a systematic manner. However, the development of wireless sensor array for accurate mapping of risk factors has been limited due to the challenges in the convergence of wireless technologies and wearable sensor arrays with a thin and small form factor. Herein, a battery-free, wireless, miniaturized multi-modal sensor array is introduced for continuous mapping of pressure, shear, and temperature at skin interfaces. The sensor array includes an integrated pressure and shear sensor consisting of 3D strain gauges and micromachined components. The mechanically decoupled design of the integrated sensor enables reliable data acquisition of pressure and shear at skin interfaces without the need for additional data processing. The sensor platform enables the analysis of interplay among localized pressure, shear, and temperature in response to changes in the patient's movement, posture, and bed inclination. The validation trials using a novel combination of wireless sensor arrays and customized pneumatic actuator demonstrate the efficacy of the platform in continuous monitoring and efficient redistribution of pressure and shear without repositioning, thereby improving the patient's quality of life.