Evaluation of the relationship between periodontal bone destruction and mesial root concavity of the maxillary first premolar.

BACKGROUND: The purpose of this study was to investigate the morphology of maxillary first premolar mesial root concavity and to analyse its relation to periodontal bone loss (BL) using cone beam computed tomography (CBCT) and panoramic radiographs. METHODS: The mesial root concavity of maxillary premolar teeth was analysed via CBCT. The sex and age of the patients, starting position and depth of the root concavity, apicocoronal length of the concavity on the crown or root starting from the cementoenamel junction (CEJ), total apicocoronal length of the concavity, amount of bone loss both in CBCT images and panoramic radiographs, location of the furcation, length of the buccal and palatinal roots, and buccopalatinal cervical root width were measured. RESULTS: A total of 610 patients' CBCT images were examined, and 100 were included in the study. The total number of upper premolar teeth was 200. The patients were aged between 18 and 65 years, with a mean age of 45.21 ± 13.13 years. All the teeth in the study presented mesial root concavity (100%, n = 200). The starting point of concavity was mostly on the cervical third of the root (58.5%). The mean depth and buccolingual length measurements were 0.96 mm and 4.32 mm, respectively. Depth was significantly related to the amount of alveolar bone loss (F = 5.834, p = 0.001). The highest average concavity depth was 1.29 mm in the group with 50% bone loss. The data indicated a significant relationship between the location of the furcation and bone loss (X2 = 25.215, p = 0.003). Bone loss exceeded 50% in 100% of patients in whom the furcation was in the cervical third and in only 9.5% of patients in whom the furcation was in the apical third (p = 0.003). CONCLUSIONS: According to the results of this study, the depth of the mesial root concavity and the coronal position of the furcation may increase the amount of alveolar bone loss. Clinicians should be aware of these anatomical factors to ensure accurate treatment planning and successful patient management.

Micro-CT evaluation of the presence of voids in endodontic obturation.

Identifying the presence, size, type and location of voids in an endodontic obturation is of great clinical importance because it enables evaluation of the three-dimensionality of the sealing techniques, which can be related to the success of the endodontic treatment. AIM: To analyze by micro-CT the presence of voids in lower single-rooted premolar root canal obturations prepared using the single cone and ultrasound vibration technique. MATERIALS AND METHODS: Twenty extracted single-rooted lower premolars were selected, and the root canal prepared surgically and chemically. In GROUP 1 - Without Vibration, the canal was obturated with a single cone and bioceramic, without applying vibration. In GROUP 2 - With Vibration, the gutta-percha cone inside the root canal was held with a cotton plier to which ultrasound vibration was applied for 3 periods of 3 seconds each. A micro-CT scanner was used to acquire and reconstruct images for analysis. RESULTS: No significant difference was found between obturation techniques, though there were differences between thirds, with the cervical third having a higher percentage of voids than the middle and apical thirds. CONCLUSIONS: The results suggest that the volume of closed, open and total voids does not differ between treatments with and without ultrasound vibration. In the cervical third, the highest volume of voids was related to oval geometry in the teeth evaluated.

La presencia de vacíos en la obturación endodóntica, su tamaño y el tipo y localización tiene gran importancia clínica ya que permite evaluar la tridimensionalidad de las técnicas de sellado y relacionarlas con el éxito del tratamiento endodóntico. OBJETIVO: analizar mediante microtomografía la presencia de vacíos en la obturación del conducto radicular de premolares inferiores unirradiculares, utilizando la técnica de cono único y vibración con ultrasonido. MATERIALES Y MÉTODOS: se seleccionaron 20 premolares inferiores unirradiculares a los que se les realizó la preparación quirúrgica y química del conducto radicular. Se realizó la obturación con cono único y biocerámico GRUPO 1- sin vibración. En el GRUPO 2 - con vibración se aplicó vibración por ultrasonido, se tomó del cono de gutapercha colocado en el interior del conducto con pinza de algodón que fue vibrada durante 3 períodos de 3 segundos cada uno. Las mismas fueron adquiridas y reconstruidas en un microtomógrafo para posterior análisis de las imágenes obtenidas. RESULTADOS: No se evidenciaron diferencias significativas entre ambas técnicas de obturación comparadas, pero si entre los tercios analizados, siendo el cervical el que mayor porcentaje de vacíos presenta en comparación a los cortes correspondientes al tercio medio y apical. CONCLUSIONES: Los resultados sugieren que el volumen de vacíos cerrados, abiertos y total no varía en los tratamientos donde se aplica vibración por ultrasonido. En el tercio cervical, el mayor volumen de vacíos se relaciona con la geometría oval que presentaron las piezas dentarias evaluadas en este estudio.

Systematic review and meta-analysis of root morphology and canal configuration of permanent premolars using cone-beam computed tomography.

INTRODUCTION: The efficacy of root canal treatment is greatly impacted by a thorough understanding of root canal anatomy. This systematic review and meta-analysis aim to thoroughly investigate the root morphology and canal configuration (RMCC) of permanent premolars (PMs). METHODOLOGY: A comprehensive analysis was conducted following the PRISMA guidelines. Literature exploration was carried out across four electronic databases (PubMed, Embase, Cochrane, and Web of Science). The risk of bias assessment was conducted for the included studies utilizing the Anatomical Quality Assessment (AQUA) tool. Data analysis was performed utilizing SPSS and RevMAN5.3.3. The meta-analysis was applied with a 95% confidence interval to calculate odds ratios (OR). RESULTS: Among the 82 selected studies, 59 studies exhibited potential bias in domain one (objective(s) and subject characteristics), followed by domain three (methodology characterization). The majority of maxillary PM1s had either single root (46.7%) or double roots (51.9%), while three-rooted variants were uncommon (1.4%). Conversely, most other PMs exhibited a single root. In terms of canal configuration, maxillary PM1s predominantly featured double distinct canals (87.2%), with the majority of maxillary PM2s displaying either a single canal (51.4%) or double canals (48.3%). Mandibular PMs were primarily characterized by single canals, accounting for 78.3% of mandibular PM1s and 90.3% of mandibular PM2s. Subgroup analyses revealed higher incidences of single-rooted and single-canalled PMs among Asians compared to Caucasians. Additionally, women exhibited a higher incidence of single-rooted PMs, while men showed a greater frequency of double-rooted PMs. CONCLUSIONS: The comprehensive analysis indicated that maxillary PM1s predominantly possess double roots and double canals, whereas maxillary PM2s and mandibular PMs were primarily characterized by single-rooted with a single canal. Notably, single root and single canal were more prevalent among women and Asian samples.

Analysis of morphology and symmetry of the root canal system of incisors, premolars and mandibular molars using CBCT.

Knowledge of root canal internal anatomy and its variations is important forproper endodontic treatment. It is therefore necessary to investigate morphological aspects among different dental groups in the same patient to define the best protocol for the case. AIM: To evaluate the morphology and symmetry of homologous incisors, premolars and mandibular molars using cone beam computed tomography (CBCT). MATERIALS AND METHOD: Descriptive statistical analysis was performed for the frequency of categorical variables, and a chi-square test or Fisher 's exact test was used to test whether gender and side were associated with number of roots, number of canals, and Vertucci's classification. Forty-five CBCT scans were evaluated, and 444 mandibular teeth were analyzed. The number of roots, number of canals, classification of the canals in each root according to Vertucci and presence of a symmetrical relationship between pairs of posterior teeth were analyzed. RESULTS: The resuls showed that 74% of mandibular central incisors had type I root canal, 26% of mandibular lateral incisors had type I and, with a significant difference in the number of canals between males and females (p < 0.05). In mandibular first premolars, 70.5% had type I; and in mandibular second premolars, 98.5% had type I. Mandibular first molars had two roots in 98% of the cases. Second mandibular molars had two roots in 92.5% of the cases, one root in 6%, and three roots in 1.5%. Symmetry between central incisors was higher in females than in males. CONCLUSIÓN: Teeth of the same group can have different morphologies in the same patient.

0 conhecimento da anatomia interna e suas variagoes anatómicas é fator importante para o adequado tratamento endodóntico. Portanto, é necessário investigar esses aspectos morfológicos entre diferentes grupos dentários de um mesmo paciente para definir o melhor protocolo para o caso. OBJETIVO: Avaliar a morfologia e simetria de incisivos, pré-molares e molares inferiores homólogos por meio de tomografia computadorizada de feixe cónico (TCFC). MATERIAIS E MÉTODO: Foi realizada análise estatística descri-tiva para a frequéncia das variáveis categóricas e foi utilizado o teste do qui-quadrado ou teste exato de Fisher para testar a relagao entre sexo e lado em comparagao com número de raízes, número de canais e classificagao de Vertucci. Quarenta e cinco TCFC foram avaliadas e 444 dentes inferiores foram analisados. Foram considerados: o número de raízes, o número de canais, o tipo dos canais acordo com a classificagao de Vertucci e a presenga de relagao simétrica entre pares de dentes posteriores. RESULTADOS: Os resultados mostraram que 74% dos incisivos centrais inferiores tinham um canal radicular tipo 1 e 26% tinham dois canais; 73% dos incisivos laterais inferiores, 26%oeram do tipo I, tinham um canal e 27% tinham dois canais, com diferenga significativa no número de canais entre os grupos masculino e feminino (p < 0,05). Nos primeiros pré-molares inferiores, tipo I, um canal foi detectado em 70,5% e dois canais em 29,5%; nos segundos pré-molares inferiores, tipo I, um único canal foi detectado em 98,5%. O primeiro molar inferior foi observado com duas raízes em 98% e tres raízes em 2%o. O segundo molar inferior tinha duas raízes em 92,5% dos casos, uma raiz em 6% e tres raízes em 1,5%. A simetria foi maior nas mulheres em comparagao aos homens nos incisivos centrais. CONCLUSÃO: Pode-se concluir que dentes de um mesmo grupo podem apresentar morfologias diferentes no mesmo paciente.

Temporary Anchorage Device Misplaced into Infratemporal Space - A Case Report.

INTRODUCTION: During orthodontic treatment, temporary anchoring devices (TADs) are used to restrain tooth movement. They are a relatively recent addition to the dental toolkit. AIM: As TADs have limitations, Dr. Eric Lieu of Taiwan developed Infra Zygomatic Crest (IZC) screws which are placed between the maxillary second premolar at the bony crest. TREATMENT PLANNING: The goal of this case study is to emphasize the value of anatomy, site selection, and IZC retrieval in the event of an accident. Cone beam computed tomography was used as a diagnostic tool for the precise location of the displaced IZC and immediate surgical retrieval was done under local anesthesia from the infratemporal space to prevent further complications. TAKEAWAY LESSONS: Orthodontists knowledge of soft tissue and hard tissue anatomy and precise positioning is crucial for successful TAD implantation.

Evaluation of the effects of postprocessing settings in digital bitewing radiographs on proximal caries detection.

OBJECTIVE: Radiographs are an integral part of detecting proximal caries. The aim of this study was to evaluate the effect of contrast, brightness, noise, sharpness, and γ adjustment of digital intraoral radiographs on the diagnosis of proximal caries. MATERIALS AND METHODS: In this in vitro study, 40 extracted teeth including 20 premolars and 20 molars with enamel lesions (white spot or dentin discoloration seen through the enamel) were mounted together in groups of eight inside the skull. Bitewing radiographic images of each dental group were obtained by a photostimulable phosphor plate sensor with exposure conditions of 8 mA, 70 kV, and 0.2 s. The images were reconstructed by the built-in software and examined by two oral and maxillofacial radiologists in various settings of contrast, brightness, sharpness, noise, and γ. The teeth were then cut mesiodistally and the presence or absence of caries was confirmed by an oral and maxillofacial pathologist using a stereomicroscope. The data were then analyzed using the κ agreement coefficient, sensitivity, specificity, and accuracy (α = .05). RESULTS: Adjustment of brightness and contrast led to higher diagnostic performance with an accuracy of 82.5% and 83.8 (for observers 1 and 2, respectively) and 82.5% (for both observers), respectively. Noise adjustment was the least helpful approach for diagnosis of proximal dental caries among other adjustments, with an accuracy of 78.8% and 77.5% for observers 1 and 2, respectively. CONCLUSION: Brightness and contrast setting was more efficient in improving the diagnostic potential of bitewing radiographs compared to other adjustments.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study.

BACKGROUND: In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations. METHODS: From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology. RESULTS: The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars. CONCLUSION: This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Three-dimensional evaluation of dental characteristics in patients with Cleidocranial dysplasia.

BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.

Anatomical Possibilities of the Alveolar Bone at the Upper Second Premolar Level.

Background and Objectives: The upper posterior teeth are typically regarded as being exclusively inferior to the maxillary sinus (MS). The expansion of the nasal fossa above the maxillary alveolar base (MAB) needs better investigation. The hypothesis was raised that the MAB in the upper premolar region, which is usually addressed by surgeons for the elevation of the antral floor, is not exclusively beneath the MS. Therefore, we aimed to document the possible upper relations of the MAB as antral, nasal, or both. Materials and Methods: A total of 145 CBCT scans were used to study four types of MAB: type 1-antral; type 2-antral with a palatal recess; type 3-antral and nasal; type 4-nasal. In type 2, the orthoradial width of the alveolar bone, the rectilinear width of the antral floor, and the maximum depth of the palatal recess were measured. For type 3, the MAB width and the straight widths of the antral and nasal segments of the MAB were measured. Results: Type 1 was found in 67.24%, type 2 in 13.45%, type 3 in 16.21%, and type 4 in 3.1% of the 290 MSs investigated. Palatal recesses were found in 11.72% of the MSs on the right side and 15.17% of the MSs on the left side. Types 1 and 2 exhibited strongly statistically significant bilateral symmetry (Pearson's Chi2 = 86.42, p < 0.001). Type 3 correlated equally with contralateral types 1 and 3. The bilateral symmetry for types 1-3 was stronger in the males (Pearson's Chi2 = 47.83, p < 0.001) than in the females (Pearson's Chi2 = 56.96, p < 0.001). There were no statistically significant associations between sex and the unilateral anatomical type. Conclusions: The MAB in the upper second premolar area should not be considered to be exclusively antral during surgeries or in anatomical teaching.

The orthodontic extraction of second premolars: The influence on airway volume.

INTRODUCTION: The extraction of second premolars and associated changes in the volume of the airway have not been previously explored. This retrospective study aimed to compare the volumetric changes of the airway preorthodontic and postorthodontic treatment in relevant extraction and control samples and to identify variables that may influence the outcome. METHODS: Cone-beam computed radiography scans of 54 patients with second premolar extraction and 59 nonextraction patients treated in a private orthodontic practice were matched for crowding. The average age for both samples was 15 years. The images were individually landmarked and measured by applying volumetric, linear, and angular parameters. The results were analyzed using repeated measures, such as variance analysis, correlation testing, and regression statistical analyses. RESULTS: There was a statistically significant increase in the airway volume for both groups (P <0.05). The difference in increase between the groups was not statistically significant. Seven variables demonstrated a collectively significant effect on changes to airway volume (F[7,112] = 38.48; P <0.001; r2 = 0.701), with 70% of the variation predicted by the variables. Multiple regression analyses indicated that changes to the area of minimum constriction (B = 32.45; t = 11.95; P <0.001) and changes to airway length (B = 94.75; t = 7.79; P <0.001) had a statistically significant effect on airway volume. CONCLUSIONS: The volume of the airway increased in both the extraction and nonextraction samples. The biggest contributors to the increase were an increase in airway length and an increase in the area of minimum constriction, which likely occurred as a result of natural growth.

Shape variation in modern human upper premolars.

Morphological variation in modern human dentition is still an open field of study. The understanding of dental shape and metrics is relevant for the advancement of human biology and evolution and is thus of interest in the fields of dental anthropology, as well as human anatomy and medicine. Of concern is also the variation of the inner aspects of the crown which can be investigated using the tools and methods of virtual anthropology. In this study, we explored inter- and intra-population morphometric variation of modern humans' upper third and fourth premolars (P3s and P4s, respectively) considering both the inner and outer aspects of the crown, and discrete traits. We worked by means of geometric morphometrics on 3D image data from a geographically balanced sample of human populations from five continents, to analyse the shape of the dentinal crown, and the crown outline in 78 P3s and 76 P4s from 85 individuals. For the study of dental traits, we referred to the Arizona State University Dental Anthropology System integrated with more recent classification systems. The 3D shape variation of upper premolar crowns varied between short and mesio-distally broad, and tall and mesio-distally narrow. The observed shape variation was independent from the geographical origin of the populations, and resulted in extensive overlap. We noted a high pairwise correlation (r1 = 0.83) between upper P3s and P4s. We did not find any significant geographic differences in the analysed non-metric traits. Our outcomes thus suggest that geographical provenance does not play a determinant role in the shaping of the dental crown, whose genesis is under strict genetic control.

Assessment of dental pulp response to carries via MR T2mapping and histological analysis.

OBJECTIVES: The aim of our study was to assess the correlation between T2 relaxation times and their variability with the histopathological results of the same teeth in relation to caries progression. MATERIALS AND METHODS: 52 extracted permanent premolars were included in the study. Prior to extractions, patients underwent magnetic resonance imaging (MRI) scanning and teeth were evaluated using ICDAS classification. Pulps of extracted teeth were histologically analysed. RESULTS: MRI T2 relaxation times (ms) were 111,9 ± 11.2 for ICDAS 0, 132.3 ± 18.5* for ICDAS 1, 124.6 ± 14.8 for ICDAS 2 and 112. 6 ± 18.2 for ICDAS 3 group (p = 0,013). A positive correlation was observed between MRI T2 relaxation times and macrophage and T lymphocyte density in healthy teeth. There was a positive correlation between vascular density and T2 relaxation times of dental pulp in teeth with ICDAS score 1. A negative correlation was found between T2 relaxation times and macrophage density. There was a positive correlation between T2 relaxation time variability and macrophage and T lymphocyte density in teeth with ICDAS score 2. In teeth with ICDAS score 3, a positive correlation between T2 relaxation times and T2 relaxation time variability and lymphocyte B density was found. CONCLUSION: The results of our study confirm the applicability of MRI in evaluation of the true condition of the pulp tissue. CLINICAL RELEVANCE: With the high correlation to histological validation, MRI method serves as a promising imaging implement in the field of general dentistry and endodontics.

Three-Dimensional Measurement of Obturation Quality of Bioceramic Materials in Filling Artificial Internal Root Resorption Cavities Using Different Obturation Techniques: An In Vitro Comparative Study.

INTRODUCTION: Pathologic conditions such as internal root resorption (IRR) may complicate root canal filling. This study aimed to evaluate and compare the obturation quality by measuring the percentage of obturation volume (POV) in root canals with artificial IRR obturated with different materials and techniques using cone beam computed tomography (CBCT). METHODS: Forty single canal extracted mandibular premolars were decoronated to standardize their length to 14 mm. Following instrumentation, the roots were cut horizontally, and artificial IRR cavities were made at the level of 7 mm from the apex. The root halves were joined using cyanoacrylate adhesive. The samples were randomly assigned to 4 groups (n = 10), and the canals were filled as follows: single-cone technique (SC), bulk-fill Bio-C Sealer (BF), and Bio-C Repair for the coronal and middle third (BCR) + cold lateral condensation technique (CLC) for the apical third and continuous wave compaction technique (CWC). The pre- and postobturation volumes and the POV were measured in the total canal and for the apical, middle, and coronal thirds separately using CBCT and Mimics Medical software. The results were analyzed statistically using one-way ANOVA and Tukey HSD test, and statistical significance was set at P < .05. RESULTS: BF group resulted in significantly lower total, coronal, middle and apical POV values compared to SC, BCR + CLC, and CWC groups (P < .05), respectively. Also, at the apical third, the BCR + CLC group showed significantly lower POV than the SC and CWC groups (P < .05), respectively. The intra-group comparison showed that BF and BCR + CLC groups had a significantly lower POV in the apical third compared to the middle third (P < .05). Conversely, the CWC group had a significantly higher apical POV than the middle third (P < .05). CONCLUSIONS: The maximum POV was obtained using the CWC technique, Bio-C Repair, and SC technique with Bio-C Sealer, making their application in IRR more preferable than the BF Bio-C Sealer.

Accuracy of Dolphin Imaging software in predicting soft tissue changes of Class II Division 1 incisor relationship treated by all first premolar extraction compared with post-treatment lateral cephalogram.

BACKGROUND: To quantify the accuracy of Dolphin Imaging software in predicting soft tissue changes of Class II Division 1 incisor relationship treated by all first premolar extraction compared with actual changes. METHODS: Pretreatment and post-treatment lateral cephalograms of 30 young adult subjects (25 females and 5 males; age range of 16 to 21 years) were imported and traced in Dolphin Imaging software (version 11.95). Tracings of actual treatment results and the Dolphin predicted treatment outcome were superimposed to calculate the prediction errors. The mean difference for the Holdaway soft tissue analysis and at each landmark was measured in both the X and Y axes. Paired t test was used to compare the statistical differences in Holdaway soft tissue analysis parameters. RESULTS: There were significant differences between the predicted and actual values in three parameters of the Holdaway soft tissue analysis (P < 0.05). The overall accuracy of estimation was better in vertical direction than horizontal. Prediction of upper and lower lip landmarks was overestimated horizontally and underestimated vertically, whereas that belonging to chin was underestimated horizontally and overestimated vertically. Soft tissue nasion and soft tissue A-point were most accurately predicted, whereas the least accuracy was found in soft tissue chin region. CONCLUSIONS: Dolphin Imaging Software (version 11.95) can be accurate enough for use in patient communication and education but should be used with caution. It is most accurate in predicting soft tissue changes in the nasion and A-point regions, but least accurate in chin region.

Morphology of the Physiological Foramen: II. Maxillary and Mandibular Premolars.

INTRODUCTION: Information concerning the anatomy of the physiological foramen is still limited. The aim of this study was to investigate the distance between the physiological and anatomic apex, the shape and diameter of the physiological foramen in maxillary (Mx) and mandibular premolars (Mn). METHODS: The anatomy of the apex of 229 maxillary (first: MxP1; second: MxP2) and 221 mandibular premolars (first: MnP1; second: MnP2) from a mixed Swiss-German population was investigated by means of microcomputed tomography and 3-dimensional software imaging. RESULTS: The following results were obtained in the presence of a main physiological foramen. 1. The distance between the physiological and anatomic foramen was 0.29-0.99 mm (MxP1), 0.21-1.03 mm (MxP2), 0.13-0.8 (MnP1), and 0.15-1.41 (MnP2). 2. The mean narrow and wide diameters of the physiological foramen were 0.19-0.33 mm (MxP1), 0.25-0.42 mm (MxP2), 0.28-0.37 (MnP1), and 0.28-0.40 (MnP2). 3. The most common physiological foramen shape was oval (66.7% MxP1, 89.7% MxP2, 91.8% MnP1, 64.4% MnP2). CONCLUSION: Considering the recommended preparation sizes based on a size corresponding to the friction, that is at the narrowest point in the area of the apical constriction (physiological foramen), and within the limitations of this ex vivo microcomputed tomography study, a final preparation size could be chosen when considering the pertaining morphologic considerations; yet, to a minimum ISO 30 size.

The ectopic mandibular canines can start tooth formation in three different locations: a case series study based on single orthopantomograms from 47 individuals.

INTRODUCTION: A former study on orthopantomograms from young children with abnormal dental development (not canine ectopia) demonstrated that the tooth bud of the mandibular canine, compared to a stable longitudinal canine axis, could be located normally, anteriorly or posteriorly, with close relation to the first premolar. AIM: The aim of the present study is to analyse on orthopantomograms if the canine axis can demonstrate where the ectopic mandibular canine started tooth formation. MATERIALS: The material consists of orthopantomograms with ectopic mandibular canines and presence of primary mandibular canines from 47 cases (29 cases 9-21 years old and 18 cases with unknown ages). The primary canines demonstrated from minor apical resorption to more severe apical resorption. METHODS: Based on canine maturity, location of the canine axes and the interrelationships between the roots of the permanent canine and first premolar, the location from where the canine started tooth formation was determined. Canine maturity. Maturity stage below half root length and maturity stage above half root length revealed that 11 ectopic canines had less than half root length and 36 cases more than half root length. Canine axes. The canine axis, through the length of the primary canines Ax, is inserted on drawings of the orthopantomograms using the tracing programme Inkscape®. Interrelationship between roots. By visual inspection, the distance between the canine and first premolar was designated close distance, normal distance and extended distance. RESULTS: The results are divided into 3 groups. Group 1: The initial site of the permanent ectopic canine is located within the canine axis (6 cases). Group 2: The initial site of the permanent ectopic canine is located posterior to the canine axis (36 cases). Group 3: The initial site of the permanent ectopic canine is located anterior to the canine axis (5 cases). CONCLUSION: The study explained that the canine axis could divide cases of ectopic canines into three groups according to the location from where tooth formation starts. For getting closer to the pattern of the ectopic canine eruption, it is necessary to analyse series of orthopantomograms taken from the same individual over several years.

Evaluating the Internal Anatomy of Maxillary Premolars in an Adult Saudi Subpopulation Using 2 Classifications: A CBCT-Based Retrospective Study.

BACKGROUND Understanding the root canal morphology is important for successful endodontic treatment. This retrospective cone-beam computed tomography (CBCT) study aimed to compare the adult maxillary premolars (MP), root, and canal morphology among a Saudi Arabian subpopulation based on Vertucci and Ahmed classifications. MATERIAL AND METHODS Scans of 1336 MP - 656 first premolars (MFP) and 680 second premolars (MSP) - were analyzed for the number of roots, morphology of the canals, and symmetry among them. The data were grouped based on the traditional preestablished Vertucci system and newer instantaneous code-based Ahmed classification. Comparative analysis was done using the chi-square test. RESULTS Two roots were common in MFP with 84.4% of the population, followed by those with 1 root and those with 3 roots. In MSP, single roots were more common. The results were non-significant with P values of 0.859 and 0.471, respectively. Most of these MFP had Type IV Vertucci configuration/²TNB¹P¹ Ahmed et al code (TN-tooth number, B-buccal canal, P-palatal canal). In MSP, Type I Vertucci/¹TN¹ Ahmed et al code was most common. However, the results were not statistically significant for the PM with P values of 0.997 and 0.732, respectively. Sex-based difference among them for the roots and root canals was also non-significant. Symmetry among PM in opposite quadrants was 87.1% in MFP and 90% in MSP. CONCLUSIONS Two roots with Type IV (²TNB¹P¹) and 1 root with Type I (¹TN¹) were most common in MFP and MSP, respectively. Symmetry among opposing PM was high.

Changes in the alveolar bone morphology among different patterns of incisor inclination during the alignment phase in orthodontic treatment without premolar extraction.

OBJECTIVE: The present study investigated bone remodelling in the upper and lower incisor regions depending on the inclination pattern during the alignment phase of orthodontic treatment (OT). MATERIALS AND METHODS: This prospective clinical study included 71 patients undergoing OT without premolar extraction. Cone beam computed tomography scans were taken before and after the alignment phase and the changes in the inclination, alveolar bone height (ABH) and bone thickness (BT) at levels 2, 3, 4, 6, 8 and 9 mm starting from the cementoenamel junction (CEJ) were determined. RESULTS: Teeth were divided into 'Retroinclination' (lingual crown inclination <0°), 'Proclination-low' (buccal crown inclination between 0° and 5°), or 'Proclination-high' (buccal crown inclination >5°). The alignment phase of OT resulted in ABH loss. The highest ABH loss in the maxilla was observed on the buccal side in the 'Proclination-high' and was 0.71 mm. ABH loss by 1.1 mm was observed in the mandible on the lingual side in the 'Retroinclination' group. The most significant changes in BT by up to 2 mm were observed at levels 6, 8 and 9 mm and these changes exhibited a moderate to strong correlation with the alterations in the inclination of individual incisors. At levels 2, 3 and 4 mm, the highest decrease in BT by up to 0.83 mm was observed on the palatal side of upper incisors in the 'Proclination-high' group. CONCLUSION: The direction and amount of tooth inclination partially determine changes in the bone parameters during the alignment phase.

Clinical challenges of biomechanical performance of narrow-diameter implants in maxillary posterior teeth in aging patients: A finite element analysis.

This study evaluated the biomechanical performance of narrow-diameter implant (NDI) treatment in atrophic maxillary posterior teeth in aging patients by finite element analysis. The upper left posterior bone segment with first and second premolar teeth missing obtained from a patient's cone beam computed tomography data was simulated with cortical bone thicknesses of 0.5 and 1.0 mm. Three model groups were analyzed. The Regimen group had NDIs of 3.3 × 10 mm in length with non-splinted crowns. Experimental-1 group had NDIs of 3.0 × 10 mm in length with non-splinted crowns and Experimental-2 group had NDIs of 3.0 × 10 mm in length with splinted crowns. The applied load was 56.9 N in three directions: axial (along the implant axis), oblique at 30° (30° to the bucco-palatal plane compared to the vertical axis of the tooth), and lateral load at 90° (90° in the bucco-palatal plane compared to the vertical axis of the tooth). The results of the von Mises stress on the implant fixture, the elastic strain, and principal value of stress on the crestal marginal bone were analyzed. The axial load direction was comparable in the von Mises stress values in all groups, which indicated it was not necessary to use splinted crowns. The elastic strain values in the axial and oblique directions were within the limits of Frost's mechanostat theory. The principal value of stress in all groups were under the threshold of the compressive stress and tensile strength of cortical bone. In the oblique and lateral directions, the splinted crown showed better results for both the von Mises stress, elastic strain, and principal value of stress than the non-splinted crown. In conclusion, category 2 NDIs can be used in the upper premolar region of aging patients in the case of insufficient bone for category 3 NDI restorations.