Novel boronium salt exhibits substantial antibacterial activity when compared to a commercial quaternary ammonium disinfectant.

Commercial disinfectants are routinely used to decontaminate surfaces where microbes are expected and unwelcome. Several disinfectants contain quaternary ammonium salts, or "quats", all being derived from ammonium. Quaternary alkyl dimethyl benzyl ammonium chloride or bromide disinfectants are widely available. These compounds are effective in reducing or eliminating bacteria on contaminated nonporous surfaces. A unique benzyl derived boronium salt with strong detergent action has been developed. It demonstrated 4-8X greater antibacterial activity against 3 different bacteria when compared to an equal concentration of a commercial quant disinfectant solution containing alkyl dimethyl benzyl ammonium chloride and alkyl dimethyl ethylbenzyl ammonium chloride. Antibacterial effectiveness of each agent was determined by the minimum inhibitory concentration (MIC) method.

Berberine Derivatives Suppress Cellular Proliferation and Tumorigenesis In Vitro in Human Non-Small-Cell Lung Cancer Cells.

Lung cancer is the leading cause of death in the world, and the most common type of lung cancer is non-small-cell lung cancer (NSCLC), accounting for 85% of lung cancer. Patients with NSCLC, when detected, are mostly in a metastatic stage, and over half of patients diagnosed with NSCLC die within one year after diagnosis; the 5-year survival rate is 24%. However, in patients with metastatic NSCLC, the 5-year survival rate is 6%. Therefore, development of a new therapeutic agent or strategy is urgent for NSCLCs. Berberine has been illustrated to be a therapeutic agent of NSCLC. In the present study, we synthesized six derivatives of berberine, and the anti-NSCLC activity of these agents was examined. Some of them exert increasing proliferation inhibition comparing with berberine. Further studies demonstrated that two of the most effective agents, 9-O-decylberberrubine bromide (B6) and 9-O-dodecylberberrubine bromide (B7), performed cell cycle regulation, in-vitro tumorigenesis inhibition and autophagic flux blocking, but not induction of cellular apoptosis in NSCLC cells. Moreover, B6 and B7 were determined to be green fluorescent and could be penetrated and localized in cellular mitochondria. Herein, B6 and B7, the berberine derivatives we synthesized, revealed better anti-NSCLC activity with berberine and may be used as therapeutic candidates for the treatment of NSCLCs.

Palladium-mediated Suzuki-Miyaura Cross-Coupling Reaction of Potassium Boc-protected aminomethyltrifluoroborate with DNA-Conjugated aryl bromides for DNA-Encoded chemical library synthesis.

A mild reaction for DNA-compatible, palladium promoted Suzuki-Miyaura cross-coupling reaction of potassium Boc-protected aminomethyltrifluoroborate with DNA-conjugated aryl bromides has been developed efficiently. This novel DNA encoded chemistry reaction proceeded well with a wide range of functional group tolerance, including aryl bromides and heteroaryl bromides. Further, the utility our DNA conjugated aminomethylated arene products is demonstrated by reaction with various types of reagents (including amide formation with carboxylic acids, alkylation with aldehydes, and carbamoylation with amines) as would be desired for the production of a DNA encoded library.

Photoredox cross-electrophile coupling in DNA-encoded chemistry.

A catalytic manifold that enables photoredox cross-electrophile coupling of alkyl bromides with DNA-tagged aryl iodides in aqueous solution is presented. This metallaphotoredox transformation was aided by the identification of a new pyridyl bis(carboxamidine) ligand, which proved critical to the nickel catalytic cycle. The described C(sp2)-C(sp3) coupling tolerates a wide range of both DNA-tagged aryl iodides as well as alkyl bromides. Importantly, this reaction was optimized for parallel synthesis, which is a paramount prerequisite for the preparation of combinatorial libraries, by using a 96-well plate-compatible blue LED array as the light source. Therefore, this mild and DNA-compatible transformation is well positioned for the construction of DNA-encoded libraries.

Highly Dispersed Nanocomposite of AgBr in g-C3N4 Matrix Exhibiting Efficient Antibacterial Effect on Drought-Resistant Pseudomonas putida under Dark and Light Conditions.

Synthesis of nanocomposites possessing intimately mixed components is highly challenging to bring out the best possible properties of the materials. The challenge is mainly due to the difficulties associated with controlling the phase segregation of individual components as a result of high interfacial tension between them and cohesive forces within each component during the synthesis. Here, we show a single-step synthesis of representative nanocomposites of g-C3N4/AgBr through a rationally designed approach, wherein melamine, the precursor of g-C3N4, has been intimately mixed with the AgBr precursor, silver-tetraoctylammonium bromide. Subsequent calcination of the obtained solid at 500 °C has resulted in the formation of highly dispersed g-C3N4/AgBr. The key to such a high dispersion lies in the surfactant-based AgBr precursor that minimized the interfacial tension during the process. The AgBr content has been varied between 2 and 20 wt % with respect to the g-C3N4 content. The obtained nanocomposites have been thoroughly characterized using XRD, XPS, ED-XRF, FE-SEM, HR-TEM, DRS, TCSPC, and BET surface area techniques. The studies revealed a high dispersion of AgBr in the g-C3N4 matrix. The nanocomposites have been found to exhibit remarkable antimicrobial properties over a drought-resistant bacterial strain of Pseudomonas putida under both dark and light conditions compared with similar compositions obtained through other methods reported so far. The present study offers a new approach for synthesizing highly dispersed and efficient nanocomposites.

Impact of Self-Assembled Monolayer Design and Electrochemical Factors on Impedance-Based Biosensing.

Real-time sensing of proteins, especially in wearable devices, remains a substantial challenge due to the need to convert a binding event into a measurable signal that is compatible with the chosen analytical instrumentation. Impedance spectroscopy enables real-time detection via either measuring electrostatic interactions or electron transfer reactions while simultaneously being amenable to miniaturization for integration into wearable form-factors. To create a more robust methodology for optimizing impedance-based sensors, additional fundamental studies exploring components influencing the design and implementation of these sensors are needed. This investigation addresses a sub-set of these issues by combining optical and electrochemical characterization to validate impedance-based sensor performance as a function of (1) biorecognition element density, (2) self-assembled monolayer chain length, (3) self-assembled monolayer charge density, (4) the electrochemical sensing mechanism and (5) the redox reporter selection. Using a pre-existing lysozyme aptamer and lysozyme analyte combination, we demonstrate a number of design criteria to advance the state-of-the-art in protein sensing. For this model system we demonstrated the following: First, denser self-assembled monolayers yielded substantially improved sensing results. Second, self-assembled monolayer composition, including both thickness and charge density, changed the observed peak position and peak current. Third, single frequency measurements, while less informative, can be optimized to replace multi-frequency measurements and in some cases (such as that with zwitterionic self-assembled monolayers) are preferred. Finally, various redox reporters traditionally not used in impedance sensing should be further explored. Collectively, these results can help limit bottlenecks associated with device development, enabling realization of next-generation impedance-based biosensing with customize sensor design for the specific application.

Synthesis of Glycosyl Chlorides and Bromides by Chelation Assisted Activation of Picolinic Esters under Mild Neutral Conditions.

A general method has been developed for the formation of glycosyl chlorides and bromides from picolinic esters under mild and neutral conditions. Benchtop stable picolinic esters are activated by a copper(II) halide species to afford the corresponding products in high yields with a traceless leaving group. Rare ß glycosyl chlorides are accessible via this route through neighboring group participation. Additionally, glycosyl chlorides with labile protecting groups previously not easily accessible can be prepared.

Synthesis and investigations into the anticancer and antibacterial activity studies of ß-carboline chalcones and their bromide salts.

A series of sixteen ß-carbolines, bearing chalcone moiety at C-1 position, were prepared from easily accessible 1-acetyl-ß-carboline and various aldehydes under basic conditions followed by N2-alkylation using different alkyl bromides. The prepared compounds were evaluated for in vitro cytotoxicity against a panel of human tumor cell lines. N2-Alkylated-ß-carboline chalcones 13a-i represented the interesting anticancer activities compared to N2-unsubstituted ß-carboline chalcones 12a-g. Off the prepared ß-carbolines, 13g exhibited broad spectrum of activity with IC50 values lower than 22.5 µM against all the tested cancer cell lines. Further, the N2-alkylated-ß-carboline chalcone 13g markedly induced cell death in MDA-MB-231 cells by AO/EB staining assay. The most cytotoxic compound 13g possessed a relatively high drug score of 0.48. Additionally, the prepared ß-carboline chalcones displayed moderate antibacterial activities against tested bacterial strains.

Direct Aldehyde C-H Arylation and Alkylation via the Combination of Nickel, Hydrogen Atom Transfer, and Photoredox Catalysis.

A mechanism that enables direct aldehyde C-H functionalization has been achieved via the synergistic merger of photoredox, nickel, and hydrogen atom transfer catalysis. This mild, operationally simple protocol transforms a wide variety of commercially available aldehydes, along with aryl or alkyl bromides, into the corresponding ketones in excellent yield. This C-H abstraction coupling technology has been successfully applied to the expedient synthesis of the medicinal agent haloperidol.

Palladium-Catalyzed Carbocyclizations of Unactivated Alkyl Bromides with Alkenes Involving Auto-tandem Catalysis.

The development of a general catalytic system for the palladium-catalyzed carbocyclization of unactivated alkyl bromides with alkenes is described. This approach uses a commercially available bisphosphine ligand and avoids the use of carbon monoxide atmosphere present in prior studies involving alkyl iodides. Detailed mechanistic studies of the transformation are performed, which are consistent with auto-tandem catalysis involving atom-transfer radical cyclization followed by catalytic dehydrohalogenation. These studies also suggest that reactions involving alkyl iodides may proceed through a metal-initiated, rather than metal-catalyzed, radical chain process.

CsPb2 Br5 Single Crystals: Synthesis and Characterization.

CsPb2 Br5 is a ternary halogen-plumbate material with close characteristics to the well-reported halide perovskites. Owing to its unconventional two-dimensional structure, CsPb2 Br5 is being looked at broadly for potential applications in optoelectronics. CsPb2 Br5 investigations are currently limited to nanostructures and powder forms of the material, which present unclear and conflicting optical properties. In this study, we present the synthesis and characterization of CsPb2 Br5 bulk single crystals, which enabled us to finally clarify the material's optical features. Our CsPb2 Br5 crystal has a two-dimensional structure with Pb2 Br5- layers spaced by Cs+ cations, and exhibits approximately 3.1 eV indirect band gap with no emission in the visible spectrum.

Design, synthesis and in vitro cytotoxicity studies of novel ß-carbolinium bromides.

A series of novel ß-carbolinium bromides has been synthesized from easily accessible ß-carbolines and 1-aryl-2-bromoethanones. The newly synthesized compounds were evaluated for their in vitro anticancer activity. Among the synthesized derivatives, compounds 16l, 16o and 16s exhibited potent anticancer activity with IC50 values of <10µM against tested cancer cell lines. The most potent analogue 16l was broadly active against all the tested cancer cell lines (IC50=3.16-7.93µM). In order to test the mechanism of cell death, we exposed castration resistant prostate cancer cell line (C4-2) to compounds 16l and 16s, which resulted in increased levels of cleaved PARP1 and AO/EB staining, indicating that ß-carbolinium salts induce apoptosis in these cells. Additionally, the most potent ß-carbolines 16l and 16s were found to inhibit tubulin polymerization.

Synthesis of Spiro Indole-2-Ones Using Three Component Reaction of N-Alkylisatins and Triphenylphosphonium Intermediates.

OBJECTIVE: A simple and efficient procedure is achieved for the synthesis of indole-2-one derivatives via three-component reaction of N-alkylisatin, activated acetylenic compounds and alkyl bromide in the presence of triphenylphosphine in water under two conditions; room temperature and microwave irradiation. MATERIALS AND METHODS: All chemicals used in this work were prepared from Fluka (Buchs, Switzerland) and were used without further purification. N-alkylisatin were synthesized in the laboratory in the procedure that is reported in the literature. Electrothermal 9100 apparatus is employed for measuring of melting points of products. Elemental analyses for C, H, and N were performed with Heraeus CHN-O-Rapid analyzer. Mass spectra were recorded on a FINNIGAN-MAT 8430 spectrometer operating at an ionization potential of 70 eV. Measurement of IR spectra was performed by Shimadzu IR-460 spectrometer. 1H, and 13C NMR spectra were evaluated with a BRUKER DRX- 500 AVANCE spectrometer at 500.1 and 125.8 MHz, respectively. RESULTS: The results were demonstrated that simple mixing of N-alkylisatin, dialkyl acetylenedicarboxylate and alkyl bromides in the presence of triphenylphosphine by using of microwave condition is the efficient method for preparation of indole derivatives in good yields. In the optimized reaction conditions, water is solvent and temperature of the mixture of reaction is 80 oC. CONCLUSION: In this study, the reaction of activated acetylenic compounds with N-alkylisatin and alkyl bromide in the presence of triphenylphosphine is investigated which is led to a facile synthesis of some functionalized indoles.

Pd-mediated cross-coupling of C-17 lithiated androst-16-en-3-ol - access to functionalized arylated steroid derivatives.

Herein, we report on Pd-mediated cross-coupling of vinyllithium steroids and aryl bromides to introduce various substituted aryls at C-17 of steroidal frameworks based on the structure of epi-androsterone. Compared to other C-C cross-couplings, this method turned out to be an easy and competitive access to biologically interesting C-17 modified steroids.

Direct synthesis of Z-alkenyl halides through catalytic cross-metathesis.

Olefin metathesis has had a large impact on modern organic chemistry, but important shortcomings remain: for example, the lack of efficient processes that can be used to generate acyclic alkenyl halides. Halo-substituted ruthenium carbene complexes decompose rapidly or deliver low activity and/or minimal stereoselectivity, and our understanding of the corresponding high-oxidation-state systems is limited. Here we show that previously unknown halo-substituted molybdenum alkylidene species are exceptionally reactive and are able to participate in high-yielding olefin metathesis reactions that afford acyclic 1,2-disubstituted Z-alkenyl halides. Transformations are promoted by small amounts of a catalyst that is generated in situ and used with unpurified, commercially available and easy-to-handle liquid 1,2-dihaloethene reagents, and proceed to high conversion at ambient temperature within four hours. We obtain many alkenyl chlorides, bromides and fluorides in up to 91 per cent yield and complete Z selectivity. This method can be used to synthesize biologically active compounds readily and to perform site- and stereoselective fluorination of complex organic molecules.

Visible light-photocatalysed carbazole synthesis via a formal (4+2) cycloaddition of indole-derived bromides and alkynes.

We successfully developed an unprecedented route to carbazole synthesis through a visible light-photocatalysed formal (4+2) cycloaddition of indole-derived bromides and alkynes. This novel protocol features extremely mild conditions, a broad substrate scope and high reaction efficiency.

Mechanistic significance of the si-o-pd bond in the palladium-catalyzed cross-coupling reactions of arylsilanolates.

Through the combination of reaction kinetics (both stoichiometric and catalytic), solution- and solid-state characterization of arylpalladium(II) arylsilanolates, and computational analysis, the intermediacy of covalent adducts containing Si-O-Pd linkages in the cross-coupling reactions of arylsilanolates has been unambiguously established. Two mechanistically distinct pathways have been demonstrated: (1) transmetalation via a neutral 8-Si-4 intermediate that dominates in the absence of free silanolate (i.e., stoichiometric reactions of arylpalladium(II) arylsilanolate complexes), and (2) transmetalation via an anionic 10-Si-5 intermediate that dominates in the cross-coupling under catalytic conditions (i.e., in the presence of free silanolate). Arylpalladium(II) arylsilanolate complexes bearing various phosphine ligands have been isolated, fully characterized, and evaluated for their kinetic competence under thermal (stoichiometric) and anionic (catalytic) conditions. Comparison of the rates for thermal and anionic activation suggested, but did not prove, that intermediates containing the Si-O-Pd linkage were involved in the cross-coupling process. The isolation of a coordinatively unsaturated, T-shaped arylpalladium(II) arylsilanolate complex ligated with t-Bu3P allowed the unambiguous demonstration of the operation of both pathways involving 8-Si-4 and 10-Si-5 intermediates. Three kinetic regimes were identified: (1) with 0.5-1.0 equiv of added silanolate (with respect to arylpalladium bromide), thermal transmetalation via a neutral 8-Si-4 intermediate; (2) with 1.0-5.0 equiv of added silanolate, activated transmetalation via an anionic 10-Si-5 intermediate; and (3) with >5.0 equiv of added silanolate, concentration-independent (saturation) activated transmetalation via an anionic 10-Si-5 intermediate. Transition states for the intramolecular transmetalation of neutral (8-Si-4) and anionic (10-Si-5) intermediates have been located computationally, and the anionic pathway is favored by 1.8 kcal/mol. The energies of all intermediates and transition states are highly dependent on the configuration around the palladium atom.

Synthesis, characterization and antibacterial properties of dihydroxy quaternary ammonium salts with long chain alkyl bromides.

Five N-methyl-N-R-N,N-bis(2-hydroxyethyl) ammonium bromides (R = -benzyl (chloride, BNQAS), -dodecyl (C12QAS), -tetradecyl (C14QAS), -hexadecyl (C16QAS), -octadecyl (C18QAS)) were prepared based on N-methyldiethanolamine (MDEA) and halohydrocarbon. Five QAS were characterized by FTIR, NMR, and MS. BNQAS, C12QAS, C14QAS, and C16QAS were confirmed by X-ray single-crystal diffraction. Their antibacterial properties indicated good antibacterial abilities against E. coli, S. aureus, B. subtilis, especially C12QAS with the best antibacterial ability (100% to E. coli, 95.65% to S. aureus, and 91.41% to B. subtilis). In addition, C12QAS also displayed the best antifungal activities than BNQAS and C18QAS against Cytospora mandshurica, Botryosphaeria ribis, Physalospora piricola, and Glomerella cingulata with the ratio of full marks. The strategy provides a facile way to design and develop new types of antibacterial drugs for application in preventing the fruit rot, especially apple.

An efficient continuous flow approach to furnish furan-based biaryls.

Suzuki cross-couplings of 5-formyl-2-furanylboronic acid with activated or neutral aryl bromides were performed under continuous flow conditions in the presence of (Bu)4N(+)F(-) and the immobilised t-butyl based palladium catalyst CatCart™ FC1032™. Deactivated aryl bromides and activated aryl chlorides were cross-coupled with 5-formyl-2-furanylboronic in the presence of (Bu)4N(+)OAc(-) using the bis-triphenylphosphine CatCart™ PdCl2(PPh3)2-DVB. Initial evidence indicates the latter method may serve as a universal approach to conduct Suzuki cross-couplings with the protocol successfully employed in the synthesis of the current gold standard Hedgehog pathway inhibitor LDE225.