Harnessing bromide ions to boost peroxymonosulfate for reactive yellow 145 dye degradation.

Bromide (Br-) was found in the fresh waters at concentrations from 0.1 to 1 mg/L and can be used to activate peroxymonosulfate (PMS) as a widely used chemical oxidation agent. In the present study, the reaction between PMS and Br- ions (PMS/Br- process) for the effective degradation of reactive yellow 145 (RY-145) dye was investigated by changing operational parameters vis solution pH, dosage of Br- ions and PMS, RY-145 concentration, and reaction time. Based on the results, the simultaneous presence of PMS and Br- ions in the solution led to efficient degradation of RY-145 with a synergistic index of 11.89. The degradation efficiency of RY-145 was decreased in severe basic pH and the presence of CO32- ions as a coexisting anion. Likewise, 4 mg/L of humic acid (HA), used as a classic scavenger, led to a 26.53% decrease in the RY-145 degradation efficiency. The free bromine (HOBr/OBr-), superoxide radical (●O2-), and singlet oxygen (1O2) was the dominant oxidation agents in RY-145 degradation, which confirmed the nonradical degradation pathway. In addition, PMS/Br- process showed excellent ability in mineralizing RY-145 in different aqueous solutions (total organic carbon (TOC) decreased 86.39% in deionized water and 78.23% in tap water). Although pollutants such as azo dyes can be effectively removed in the PMS/Br- process, the formation of byproducts should be strategically controlled and special attention should be paid when the PMS-based advance oxidation process is applied to treat Br- containing solutions.

Unique effect of bromide ion on intensification of advanced oxidation processes for pollutants removal: A systematic review.

Advanced oxidation processes (AOPs) have been developed to decompose toxic pollutants to protect the aquatic environment. AOP has been considered an alternative treatment method for wastewater treatment. Bromine is present in natural waters posing toxic effects on human health and hence, its removal from drinking water sources is necessary. Of the many techniques advanced oxidation is covered in this review. This review systematically examines literature published from 1997 to April 2024, sourced from Scopus, PubMed, Science Direct, and Web of Science databases, focusing on the efficacy of AOPs for pollutant removal from aqueous solutions containing bromide ions to investigate the impact of bromide ions on AOPs. Data and information extracted from each article eligible for inclusion in the review include the type of AOP, type of pollutants, and removal efficiency of AOP under the presence and absence of bromide ion. Of the 1784 documents screened, 90 studies met inclusion criteria, providing insights into various AOPs, including UV/chlorine, UV/PS, UV/H2O2, UV/catalyst, and visible light/catalyst processes. The observed impact of bromide ion presence on the efficacy of AOP processes, alongside the AOP method under scrutiny, is contingent upon various factors such as the nature of the target pollutant, catalyst type, and bromide ion concentration. These considerations are crucial in selecting the best method for removing specific pollutants under defined conditions. Challenges were encountered during result analysis included variations in experimental setups, disparities in pollutant types and concentrations, and inconsistencies in reporting AOP performance metrics. Addressing these parameters in research reports will enhance the coherence and utility of subsequent systematic reviews.

Exploiting the advantages of cationic copolymers and AgBr nanoparticles to optimize the antibacterial activity of chitosan.

Recently, the chitosan (CS)-based composites have attracted increasing attention for controlling and preventing the spread of pathogenic microorganisms. Herein, an amphiphilic copolymer containing epoxy and quaternary ammonium groups (PBGDBr) was synthesized via three common acrylate monomers. The epoxy groups of this copolymer were then crosslinked with the amino groups of CS to synthesize a natural/synthetic (PBGDBr-C) composite to increase the water solubility of CS under alkaline conditions and enhance its antibacterial activity based on chemical contact-type modes. Moreover, silver bromide nanoparticles (AgBr NPs)-decorated PBGDBr-C (AgBr@PBGDBr-C) composite was prepared, which aimed to endow the final AgBr@PBGDBr-C composite with a photodynamic antibacterial mode relying on the formation of Ag/AgBr nanostructures catalyzed by visible light on AgBr NPs. The results showed that the final composite possessed satisfactory bactericidal effects at concentrations higher than 64 and 128 µg/mL against Escherichia coli and Staphylococcus aureus, respectively. Additionally, The L929 cells treated with the final composite retained high cell viability (>80 %) at a concentration of 128 µg/mL, indicating its low toxicity to L929 cells. Overall, our synthetic strategy exploits a multi-modal system that enables chemical-photodynamic synergies to treat infections caused by pathogenic bacteria while delaying the development of bacterial resistance.

Formation and toxicity alteration of halonitromethanes from Chlorella vulgaris during UV/chloramination process involving bromide ion.

Frequent algal blooms cause algal cells and their algal organic matter (AOM) to become critical precursors of disinfection by-products (DBPs) during water treatment. The presence of bromide ion (Br-) in water has been demonstrated to affect the formation laws and species distribution of DBPs. However, few researchers have addressed the formation and toxicity alteration of halonitromethanes (HNMs) from algae during disinfection in the presence of Br-. Therefore, in this work, Chlorella vulgaris was selected as a representative algal precursor to investigate the formation and toxicity alteration of HNMs during UV/chloramination involving Br-. The results showed that the formation concentration of HNMs increased and then decreased during UV/chloramination. The intracellular organic matter of Chlorella vulgaris was more susceptible to form HNMs than the extracellular organic matter. When the Br-: Cl2 mass ratio was raised from 0.004 to 0.08, the peak of HNMs total concentration increased 33.99%, and the cytotoxicity index and genotoxicity index of HNMs increased 67.94% and 22.80%. Besides, the formation concentration and toxicity of HNMs increased with increasing Chlorella vulgaris concentration but decreased with increasing solution pH. Possible formation pathways of HNMs from Chlorella vulgaris during UV/chloramination involving Br- were proposed based on the alteration of nitrogen species and fluorescence spectrum analysis. Furthermore, the formation laws of HNMs from Chlorella vulgaris in real water samples were similar to those in deionized water samples. This study contributes to a better comprehension of HNMs formation from Chlorella vulgaris and provides valuable information for water managers to reduce hazards associated with the formation of HNMs.

Protocol to develop a moisture-desorptive passive cooling system for electronics thermal management.

Passive thermal management with zero-energy consumption and high compactness has drawn increasing attention. Here, we present a protocol to develop a hygroscopic salt-loaded heat sink with a moisture-permeable membrane encapsulation technique for electronics cooling. We describe steps for preparing lithium bromide solution and heat sink with anti-corrosion graphene coating. We then detail procedures for preparing the hygroscopic salt-loaded membrane-encapsulated heat sinks (HSMHSs). The produced low-cost HSMHS exhibits remarkably high thermal management performance without the risks of leakage and corrosion. For complete details on the use and execution of this protocol, please refer to Sui et al.1.

Sunlight enhanced the formation of tribromomethane from benzotriazole degradation during the sunlight/free chlorine treatment in the presence of bromide.

The coexistence of free chlorine and bromide under sunlight irradiation (sunlight/FC with Br-) is unavoidable in outdoor seawater swimming pools, and the formation of brominated disinfection byproducts could act more harmful than chlorinated disinfection byproducts. In this study, benzotriazole was selected as a model compound to investigate the degradation rate and the subsequent formation of disinfection byproducts via sunlight/FC with Br- process. The rate constants for the degradation of benzotriazole under pseudo first order conditions in sunlight/FC with Br- and sunlight/FC are 2.3 ± 0.07 × 10-1 min-1 and 6.0 ± 0.7 × 10-2 min-1, respectively. The enhanced degradation of benzotriazole can be ascribed to the generation of HO•, bromine species, and reactive halogen species (RHS) during sunlight/FC with Br-. Despite the fact that sunlight/FC with Br- process enhanced benzotriazole degradation, the reaction results in increasing tribromomethane (TBM) formation. A high concentration (37.8 µg/L) of TBM was detected in the sunlight/FC with Br-, which was due to the reaction of RHS. The degradation of benzotriazole was notably influenced by the pH value (pH 4 - 11), the concentration of bromide (0 - 2 mM), and free chlorine (1 - 6 mg/L). Furthermore, the concentration of TBM increased when the free chlorine concentrations increased, implying the formation potential of harmful TBM in chlorinated seawater swimming pools.

Coupling and regulation mechanisms of the flavin-dependent halogenase PyrH observed by infrared difference spectroscopy.

Flavin-dependent halogenases are central enzymes in the production of halogenated secondary metabolites in various organisms and they constitute highly promising biocatalysts for regioselective halogenation. The mechanism of these monooxygenases includes formation of hypohalous acid from a reaction of fully reduced flavin with oxygen and halide. The hypohalous acid then diffuses via a tunnel to the substrate-binding site for halogenation of tryptophan and other substrates. Oxidized flavin needs to be reduced for regeneration of the enzyme, which can be performed in vitro by a photoreduction with blue light. Here, we employed this photoreduction to study characteristic structural changes associated with the transition from oxidized to fully reduced flavin in PyrH from Streptomyces rugosporus as a model for tryptophan-5-halogenases. The effect of the presence of bromide and chloride or the absence of any halides on the UV-vis spectrum of the enzyme demonstrated a halide-dependent structure of the flavin-binding pocket. Light-induced FTIR difference spectroscopy was applied and the signals assigned by selective isotope labeling of the protein moiety. The identified structural changes in α-helix and ß-sheet elements were strongly dependent on the presence of bromide, chloride, the substrate tryptophan, and the product 5-chloro-tryptophan, respectively. We identified a clear allosteric coupling in solution at ambient conditions between cofactor-binding site and substrate-binding site that is active in both directions, despite their separation by a tunnel. We suggest that this coupling constitutes a fine-tuned mechanism for the promotion of the enzymatic reaction of flavin-dependent halogenases in dependence of halide and substrate availability.

Comparative formation of chlorinated and brominated disinfection byproducts from chlorination and bromination of amino acids.

Amino acids are the main components of dissolved organic nitrogen in algal- and wastewater-impacted waters, which can react with chlorine to form toxic halogenated disinfection by-products (DBPs) in the disinfection process. In the presence of bromide, the reaction between amino acids and secondarily formed hypobromous acid can lead to the formation of brominated DBPs that are more toxic than chlorinated analogues. This study compares the formation of regulated and unregulated DBPs during chlorination and bromination of representative amino acids (AAs) (e.g., aspartic acid, asparagine, tryptophan, tyrosine, and histidine). In general, concentrations of brominated DBPs (trihalomethanes, haloacetonitriles, and haloacetamides, 24.9-5835.0 nM) during bromination were higher than their chlorinated analogues (9.3-3235.3 nM) during chlorination. This indicates the greater efficacy of bromine as a halogenating agent. However, the formation of chlorinated haloacetic acids during chlorination was higher than the corresponding brominated DBPs from bromination. It is likely that an oxidation pathway is required for the formation of haloacetic acids and chlorine is a stronger oxidant than bromine. Moreover, chlorine forms higher levels of haloacetaldehydes (74.4-1077.8 nM) from amino acids than bromine (1.0-480.2 nM) owing to the instability of brominated species. The DBP formation yields depend on the types of functional groups in the side chain of AAs. Eight intermediates resulting from chlorination/bromination of tyrosine were identified by triple quadrupole mass spectrometer, including N-chlorinated/brominated tyrosine, 3-chloro/bromo-tyrosine, and 3,5-dichloro/dibromo-tyrosine. These findings provided new insights into the DBP formation during the chlorination of algal- and wastewater-impacted waters with elevated bromide.

Visible-Light-Activated Nickel Thiolates for C-S Couplings.

Thiolates are known as the inhibitors of metal catalysis due to their strong coordination with the metal. Herein, we reported visible-light-induced homolysis of the Ni-S bond to activate the nickel(II) thiolates for the C-S coupling, obviating the use of exogenous photocatalysts and other additives. Various aryl bromides/iodides can efficiently couple with thiols with a wide range of functional groups under mild conditions. Preliminary mechanistic studies suggested the homolysis of the Ni-S bond is the key step for couplings and nickel(0) is not involved in the process.

Formation of Targeted and Novel Disinfection Byproducts during Chlorine Photolysis in the Presence of Bromide.

Chlorine photolysis is an advanced oxidation process that relies on the combination of direct chlorination by free available chlorine, direct photolysis, and reactive oxidants to transform contaminants. In waters that contain bromide, free available bromine and reactive bromine species can also form. However, little is known about the underlying mechanisms or formation potential of disinfection byproducts (DBPs) under these conditions. We investigated reactive oxidant generation and DBP formation under dark conditions, chlorine photolysis, and radical-quenched chorine photolysis with variable chlorine (0-10 mg-Cl2/L) and bromide (0-2,000 µg/L) concentrations, as well as with free available bromine. Probe loss rates and ozone concentrations increase with chlorine concentration and are minimally impacted by bromide. Radical-mediated processes partially contribute to the formation targeted DBPs (i.e., trihalomethanes, haloacetic acids, haloacetonitriles, chlorate, and bromate), which increase with increasing chlorine concentration. Chlorinated novel DBPs detected by high-resolution mass spectrometry are attributable to a combination of dark chlorination, direct halogenation by reactive chlorine species, and transformation of precursors, whereas novel brominated DBPs are primarily attributable to dark bromination of electron-rich formulas. The formation of targeted and novel DBPs during chlorine photolysis in waters with elevated bromide may limit treatment applications.

Nickel-Catalyzed C-I-Selective C(sp2 )-C(sp3 ) Cross-Electrophile Coupling of Bromo(iodo)arenes with Alkyl Bromides.

Despite several methodologies established for C(sp2 )-I selective C(sp2 )-C(sp3 ) bond formations, achieving arene-flanked quaternary carbons by cross-coupling of tertiary alkyl precursors with bromo(iodo)arenes in a C(sp2 )-I selective manner is rare. Here we report a general Ni-catalyzed C(sp2 )-I selective cross-electrophile coupling (XEC) reaction, in which, beyond 3° alkyl bromides (for constructing arene-flanked quaternary carbons), 2° and 1° alkyl bromides are also demonstrated to be viable coupling partners. Moreover, this mild XEC displays excellent C(sp2 )-I selectivity and functional group compatibility. The practicality of this XEC is demonstrated in simplifying the routes to several medicinally relevant and synthetically challenging compounds. Extensive experiments show that the terpyridine-ligated NiI halide can exclusively activate alkyl bromides, forming a NiI -alkyl complex through a Zn reduction. Attendant density functional theory (DFT) calculations reveal two different pathways for the oxidative addition of the NiI -alkyl complex to the C(sp2 )-I bond of bromo(iodo)arenes, explaining both the high C(sp2 )-I selectivity and generality of our XEC.

Acenaphthoimidazolylidene-Ligated Palladacycle Enabled Suzuki-Miyaura Cross-Coupling Employing Equimolar Organoboron for Tri-Ortho-Substituted Bi(hetero)aryls and Teraryls.

The Pd-catalyzed Suzuki-Miyaura cross-couplings (SMRs) are utilized as the most practical method to construct C-C bond, especial for biaryls. However, a major disadvantage of current protocols is the requirement of excess organoboron coupling partner (1.5-3.0 equiv.). Herein, a novel palladacyclic 1,3-bis(2,6-diisopropylphenyl)acenaphthoimidazol-2-ylidene (AnIPr) precatalyst possessing a chiral oxazoline was designed, which enabled a general protocol towards bulky tri-ortho-substituted biaryls, ternaphthalenes and diarylanthracenes via the Pd-catalyzed SMR employing equimolar organoborons and aryl bromides. A remarkable scope of substrates with various functional groups and heterocycles were well compatible with an adaptability to synthesize useful ligands.

Overcoming Photochemical Limitations in Metallaphotoredox Catalysis: Red-Light-Driven C-N Cross-Coupling.

Aryl amination is an essential transformation for medicinal, process, and materials chemistry. In addition to classic Buchwald-Hartwig amination conditions, blue-light-driven metallaphotoredox catalysis has emerged as a valuable tool for C-N cross-coupling. However, blue light suffers from low penetration through reaction media, limiting its scalability for industrial purposes. In addition, blue light enhances unwanted side-product formation in metallaphotoredox catalysis, namely hydrodehalogenation. Low-energy light, such as deep red (DR) or near-infrared (NIR), offers a solution to this problem as it can provide enhanced penetration through reaction media as compared to higher-energy wavelengths. Herein, we show that low-energy light can also enhance the desired reactivity in metallaphotoredox catalysis by suppressing unwanted hydrodehalogenation. We hypothesize that the reduced side product is formed by direct photolysis of the aryl-nickel bond by the high-energy light, leading to the generation of aryl radicals. Using deep-red or near-infrared light and an osmium photocatalyst, we demonstrate an enhanced scope of (hetero)aryl bromides and amine-based nucleophiles with minimal formation of hydrodehalogenation byproducts.

The Influence of the Halide in the Crystal Structures of 1-(2,3,5,6-Tetrafluoro-4-pyridyl)-3-benzylimidazolium Halides.

The crystal structures of 1-(2,3,5,6-tetrafluoro-4-pyridyl)-3-benzylimidazolium chloride (1) and iodide (3) have been determined by single crystal X-ray diffraction. The crystal structure of 1 is similar to that of the bromide salt (2), possessing anion···C5F5N···C6H5 motifs, whilst that of 3 contains columns of alternating iodide anions and parallel tetrafluoropyridyl rings. All three crystal structures possess C(1)−H∙∙∙X− and C(2)−H∙∙∙X− hydrogen bonding. DFT calculations reveal that the strengths of the hydrogen bonding interactions lie in the order C(1)−H···X− > C(3)−H···X− > C(2)−H···X− for the same halide (X−) and Cl− > Br− > I− for each position. It is suggested that salt 3 adopts a different structure to salts 1 and 2 because of the larger size of iodide.

Synthesis, Characterization, Biological Evaluation, and In Silico Studies of Imidazolium-, Pyridinium-, and Ammonium-Based Ionic Liquids Containing n-Butyl Side Chains.

Ionic liquids (ILs) have emerged as active pharmaceutical ingredients because of their excellent antibacterial and biological activities. Herein, we used the green-chemistry-synthesis procedure, also known as the metathesis method, to develop three series of ionic liquids using 1-methyl-3-butyl imidazolium, butyl pyridinium, and diethyldibutylammonium as cations, and bromide (Br-), methanesulfonate (CH3SO3-), bis(trifluoromethanesulfonyl)imide (NTf2-), dichloroacetate (CHCl2CO2-), tetrafluoroborate (BF4-), and hydrogen sulfate (HSO4-) as anions. Spectroscopic methods were used to validate the structures of the lab-synthesized ILs. We performed an agar well diffusion assay by using pathogenic bacteria that cause various infections (Escherichia coli; Enterobacter aerogenes; Klebsiella pneumoniae; Proteus vulgaris; Pseudomonas aeruginosa; Streptococcus pneumoniae; Streptococcus pyogenes) to scrutinize the in vitro antibacterial activity of the ILs. It was established that the nature and unique combination of the cations and anions were responsible for the antibacterial activity of the ILs. Among the tested ionic liquids, the imidazolium cation and NTf2- and HSO4- anions exhibited the highest antibacterial activity. The antibacterial potential was further investigated by in silico studies, and it was observed that bis(trifluoromethanesulfonyl)imide (NTf2-) containing imidazolium and pyridinium ionic liquids showed the maximum inhibition against the targeted bacterial strains and could be utilized in antibiotics. These antibacterial activities float the ILs as a promising alternative to the existing antibiotics and antiseptics.

Kinetic modelling of the bromine-ammonia system: Formation and decomposition of bromamines.

Bromamines i.e. monobromamine (NH2Br), dibromamine (NHBr2), and tribromamine (NBr3) can be formed during oxidative treatment of waters containing bromide and ammonia. The formation and decomposition of bromamines in aqueous solution was investigated and a comprehensive kinetic model of the bromine-ammonia system was developed at 23 ± 1 °C. Determination of rate constants and model validation were primarily performed at pH 8.0 - 8.3 for subsequent application to seawater disinfection. The rate constant of NHBr2 self-decomposition was determined by second-order rate law linearization with k9 = 5.5 (± 0.8) M-1s-1 at pH 8.10. The rate constant of NBr3 self-decomposition increased proportionately to the concentration of hydroxide ions (OH-) according to the equation k10 = 4.4 (± 0.1) × 107. [OH-] over the pH range 6.0 - 8.5, which gave k10 = 56 (± 1) M-1s-1 at pH 8.10. The rate constants of NHBr2 and NBr3 formation were obtained by fitting model-predicted data to the experimental results and were found to be k3 = 2.3 (± 0.2) × 104M-1s-1 and k5 = 4.0 (± 0.6) × 103M-1s-1, respectively at pH 8.10. NBr3 was also found to react with NHBr2 with k11 = 3.4 (± 0.2) × 103M-1s-1 at pH 8.10. A kinetic model was proposed based on these experimental rate constants and literature values, which provided a good prediction of bromamines formation and decomposition for various initial bromine and ammonia concentrations. The kinetic model was also used to accurately predict the total oxidant concentration and the speciation of bromamines during breakpoint bromination. This study provides kinetic data to model more complex oxidative systems such as seawater chlorination in the presence of ammonia.

Aryl Halides as Halogenation Reagents in the Bromination and Iodination of Arene-Tethered Diols.

Aromatic halides constitute a valuable class of building blocks that are commonly used in organic synthesis. In this study, we demonstrate usage of aryl bromides and aryl iodides in C-Br or C-I bond formation. Methyl 2-bromobenzoate and 2-nitrophenyl iodides were developed as mild and effective bromination and iodination reagents for functionalization of arene-tethered diols. This efficient cascaded catalysis can be applied to the total syntheses of natural product Mafaicheenamine A and Claulamine A.

Suzuki C-C Coupling in Paper Spray Ionization: Microsynthesis of Biaryls and High-Sensitivity MS Detection of Aryl Bromides.

Suzuki-Miyaura cross-coupling is one of the most powerful strategies for constructing biaryl compounds. However, classic Suzuki-Miyaura coupling suffers from hour-scale reaction time and competitive protodeboronation. To address these problems, a mild nonaqueous potassium trimethylsilanolate (TMSOK)-assisted Suzuki-Miyaura coupling strategy was designed for the microsynthesis of biaryls in paper spray ionization (PSI). Due to the acceleration power facilitated by microdroplet chemistry in reactive PSI, the microsynthesis of biaryls by reactive PSI was accomplished within minutes with comparable yields to the bulk, showing good substrate applicability from 32 Suzuki-Miyaura reactions of aryl bromides and aryl boronic acid/borates bearing different substituents. Based on the above TMSOK-assisted Suzuki-Miyaura coupling strategy, we further developed a high-sensitivity and selective PSI mass spectrometry (MS) method for quantitative analysis of aryl bromides, a class of environmentally persistent organic pollutants that cannot be directly detected by ambient mass spectrometry due to their low ionization efficiency. In situ derivatization of aryl bromides was achieved with aryl borates bearing quaternary ammonium groups in PSI. The proposed PSI-MS method shows good linearity over the 0.01-10 µmol L-1 range with low detection limits of 1.8-4.8 nmol L-1 as well as good applicability to the rapid determination of six aryl bromides in three environmental water samples. The proposed PSI-MS method also shows good applicability to brominated flame retardants (polybrominated diphenyls/diphenyl esters). Overall, this study provides a simple, rapid, low-cost, high-sensitivity, and high-selectivity strategy for trace aryl bromides and other brominated pollutants in real samples with minimal/no sample pretreatment.

Reductive Cross-Coupling of Unreactive Electrophiles.

Transition-metal-catalyzed reductive coupling of electrophiles has emerged as a powerful tool for the construction of molecules. While major achievements have been made in the field of cross-couplings between organic halides and pseudohalides, an increasing number of reports demonstrates reactions involving more readily available, low-cost, and stable, but unreactive electrophiles. This account summarizes the recent results in our laboratory focusing on this topic. These findings typically include deoxygenative C-C coupling of alcohols, reductive alkylation of alkenyl acetates, reductive C-Si coupling of chlorosilanes, and reductive C-Ge coupling of chlorogermanes.The reductive deoxygenative coupling of alcohols with electrophiles is synthetically appealing, but the potential of this chemistry remains to be disclosed. Our initial study focused on the reaction of allylic alcohols and aryl bromides by the combination of nickel and Lewis acid catalysis. This method offers a selectivity that is opposite to that of the classic Tsuji-Trost reactions. Further investigation on the reaction of benzylic alcohols led to the foundation of a dynamic kinetic cross-coupling strategy with applications in the nickel-catalyzed reductive arylation of benzylic alcohols and cobalt-catalyzed enantiospecific reductive alkenylation of allylic alcohols. The titanium catalysis was later established to produce carbon radicals directly from unactivated tertiary alcohols via C-OH cleavage. The development of their coupling reactions with carbon fragments delivers new methods for the construction of all-carbon quaternary centers. These reactions have shown high selectivity for the functionalization of tertiary alcohols, leaving primary and secondary alcohols intact. Alkenyl acetates are inexpensive, stable, and environmentally friendly and are considered the most attractive alkenyl reagents. The development of reductive alkylation of alkenyl acetates with benzyl ammoniums and alkyl bromides offers mild approaches for the conversion of ketones into aliphatic alkenes.Extensive studies in this field have enabled us to extend the cross-electrophile coupling from carbon to silicon and germanium chemistry. These reactions harness the ready availability of chlorosilanes and chlorogermanes but suffer from the challenge of their low reactivity toward transition metals. Under reductive nickel catalysis, a broad range of alkenyl and aryl electrophiles couple well with vinyl- and hydrochlorosilanes. The use of alkyl halides as coupling partners led to the formation of functionalized alkylsilanes. The C-Ge coupling seems less substrate-dependent, and various common chlorogermanes couple well with aryl, alkenyl, and alkyl electrophiles. In general, functionalities such as Grignard-sensitive groups (e.g., acid, amide, alcohol, ketone, and ester), acid-sensitive groups (e.g., ketal and THP protection), alkyl fluoride and chloride, aryl bromide, alkyl tosylate and mesylate, silyl ether, and amine are tolerated. These methods provide new access to organosilicon and organogermanium compounds, some of which are challenging to obtain otherwise.

A Model Assessment of the Occurrence and Reactivity of the Nitrating/Nitrosating Agent Nitrogen Dioxide (•NO2) in Sunlit Natural Waters.

Nitrogen dioxide (•NO2) is produced in sunlit natural surface waters by the direct photolysis of nitrate, together with •OH, and upon the oxidation of nitrite by •OH itself. •NO2 is mainly scavenged by dissolved organic matter, and here, it is shown that •NO2 levels in sunlit surface waters are enhanced by high concentrations of nitrate and nitrite, and depressed by high values of the dissolved organic carbon. The dimer of nitrogen dioxide (N2O4) is also formed in the pathway of •NO2 hydrolysis, but with a very low concentration, i.e., several orders of magnitude below •NO2, and even below •OH. Therefore, at most, N2O4 would only be involved in the transformation (nitration/nitrosation) of electron-poor compounds, which would not react with •NO2. Although it is known that nitrite oxidation by CO3•- in high-alkalinity surface waters gives a minor-to-negligible contribution to •NO2 formation, it is shown here that NO2- oxidation by Br2•- can be a significant source of •NO2 in saline waters (saltwater, brackish waters, seawater, and brines), which offsets the scavenging of •OH by bromide. As an example, the anti-oxidant tripeptide glutathione undergoes nitrosation by •NO2 preferentially in saltwater, thanks to the inhibition of the degradation of glutathione itself by •OH, which is scavenged by bromide in saltwater. The enhancement of •NO2 reactions in saltwater could explain the literature findings, that several phenolic nitroderivatives are formed in shallow (i.e., thoroughly sunlit) and brackish lagoons in the Rhône river delta (S. France), and that the laboratory irradiation of phenol-spiked seawater yields nitrophenols in a significant amount.