Efficient remediation of different concentrations of Cr-contaminated soils by nano zero-valent iron modified with carboxymethyl cellulose and biochar.

Nano zero-valent iron (nZVI) is widely used in soil remediation due to its high reactivity. However, the easy agglomeration, poor antioxidant ability and passivation layer of Fe-Cr coprecipitates of nZVI have limited its application scale in Cr-contaminated soil remediation, especially in high concentration of Cr-contaminated soil. Herein, we found that the carboxymethyl cellulose on nZVI particles could increase the zeta potential value of soil and change the phase of nZVI. Along with the presence of biochar, 97.0% and 96.6% Cr immobilization efficiency through CMC-nZVI/BC were respectively achieved in high and low concentrations of Cr-contaminated soils after 90-days remediation. In addition, the immobilization efficiency of Cr(VI) only decreased by 5.1% through CMC-nZVI/BC treatment after 10 weeks aging in air, attributing to the strong antioxidation ability. As for the surrounding Cr-contaminated groundwater, the Cr(VI) removal capacity of CMC-nZVI/BC was evaluated under different reaction conditions through column experiments and COMSOL Multiphysics. CMC-nZVI/BC could efficiently remove 85% of Cr(VI) in about 400 hr when the initial Cr(VI) concentration was 40 mg/L and the flow rate was 0.5 mL/min. This study demonstrates that uniformly dispersed CMC-nZVI/BC has an excellent remediation effect on different concentrations of Cr-contaminated soils.

Carboxymethyl cellulose-chitosan edible films for food packaging: A review of recent advances.

Polysaccharide-based edible films have been widely developed as food packaging materials in response to the rising environmental concerns caused by the extensive use of plastic packaging. In recent years, the integration of carboxymethyl cellulose (CMC) and chitosan (CS) for a binary edible film has received considerable interest because this binary edible film can retain the advantages of both constituents (e.g., the great oxygen barrier ability of CMC and moderate antimicrobial activity of CS) while mitigating their respective disadvantages (e.g., the low water resistance of CMC and poor mechanical strength of CS). This review aims to present the latest advancements in CMC-CS edible films. The preparation methods and properties of CMC-CS edible films are comprehensively introduced. Potential additives and technologies utilized to enhance the properties are discussed. The applications of CMC-CS edible films on food products are summarized. Literature shows that the current preparation methods for CMC-CS edible film are solvent-casting (main) and thermo-mechanical methods. The CMC-CS binary films have superior properties compared to films made from a single constituent. Moreover, some properties, such as physical strength, antibacterial ability, and antioxidant activity, can be greatly enhanced via the incorporation of some bioactive substances (e.g. essential oils and nanomaterials). To date, several applications of CMC-CS edible films in vegetables, fruits, dry foods, dairy products, and meats have been studied. Overall, CMC-CS edible films are highly promising as food packaging materials.

Flexible high electrochemical active hydrogel for wearable sensors and supercapacitor electrolytes.

With the rapid advancement of flexible, portable devices, hydrogel electrolytes have gained considerable attention as potential replacements for conventional liquid electrolytes. A hydrogel electrolyte was synthesised by cross-linking acrylic acid (AA), acrylamide (AM), carboxymethyl cellulose (CMC), and zinc sulphate (ZnSO4). The formation of hydrogen bonds and chelate interactions between the P(AA-co-AM) polymer, CMC, and ZnSO4 created a robust network, enhancing the mechanical properties of the hydrogel electrolytes. Notably, the hydrogel electrolyte containing 0.6 % CMC demonstrated superior mechanical strength (compression strength of 1.22 MPa, tensile stress of 230 kPa, tensile strain of 424 %, adhesion strength of 1.98 MPa on wood). Additionally, the CMC/P(AA-co-AM) hydrogels exhibited commendable electrical performance (38 mS/cm) and a high gauge factor (2.9), enabling the precise detection of physiological activity signals through resistance measurements. The unique network structure of the hydrogel electrolyte also ensured a stable bonding interface between the electrode and the electrolyte. After 2000 charge-discharge cycles, the supercapacitor maintained good capacitance characteristics, with a capacitance retention rate of 71.21 % and a stable Coulombic efficiency of 98.85 %, demonstrating excellent cyclic stability. This study introduces a novel methodology for fabricating multifunctional all-solid-state supercapacitors and suggests that the hydrogel can significantly advance the development of wearable energy storage devices.

Hydrogels comprising oxidized carboxymethyl cellulose and water-soluble chitosan at varied oxidation levels: Synthesis, characterization, and adsorptive toward methylene blue.

Chitosan, as a biomaterial, has increasingly garnered attention. However, its limited solubility in water-only dissolving in certain dilute acidic solutions-substantially restricts its broader application. In this investigation, chitosan underwent a solubilization modification to acquire water solubility, facilitating its dissolution in neutral aqueous mediums. Subsequently, this water-soluble chitosan (WSC) was interlinked with oxidized carboxymethyl cellulose (OCMC), characterized by varied oxidation extents, to synthesize hydrogels. Structural characterization verified the formation of imine bonds resulting from crosslinking interactions between the amino groups of water-soluble chitosan and the aldehyde groups of oxidized carboxymethyl cellulose. Employing performance characterization analysis, it was discerned that an increase in the oxidation level of the oxidized carboxymethyl cellulose corresponded to a denser hydrogel network architecture and the hardness increased from 3.01 N to 6.16 N. Moreover, the capacity of these hydrogels to adsorb methylene blue was meticulously examined. Notably, the hydrogel denoted as WSC/66%OCMC manifested an adsorption capability of 28.08 mg/g for methylene blue. Analytical findings from adsorption kinetics and isotherm studies indicate that the adsorption mechanism of the WSC/66%OCMC hydrogel follows the pseudo-second-order kinetic model and corresponds to the Freundlich isotherm model.

Establishment of nanoparticle screening technique: A pivotal role of sodium carboxymethylcellulose in enhancing oral bioavailability of poorly water-soluble aceclofenac.

A novel nanoparticle screening technique was established to mostly enhance the aqueous solubility and oral bioavailability of aceclofenac using nanoparticle systems. Among the polymers investigated, sodium carboxymethylcellulose (Na-CMC) showed the greatest increase in drug solubility. Utilizing spray-drying technique, the solvent-evaporated solid dispersion (SESD), surface-attached solid dispersion (SASD), and solvent-wetted solid dispersion (SWSD) were prepared using aceclofenac and Na-CMC at a weight ratio of 1:1 in 50 % ethanol, distilled water, and ethanol, respectively. Using Na-CMC as a solid carrier, an aceclofenac-loaded liquid self-emulsifying drug delivery system was spray-dried and fluid-bed granulated together with microcrystalline cellulose, producing a solid self-nanoemulsifying drug delivery system (SNEDDS) and solid self-nanoemulsifying granule system (SNEGS), respectively. Their physicochemical properties and preclinical assessments in rats were performed. All nanoparticles exhibited very different properties, including morphology, crystallinity, and size. As a result, they significantly enhanced the solubility, dissolution, and oral bioavailability in the following order: SNEDDS ≥ SNEGS > SESD ≥ SASD ≥ SWSD. Based on our screening technique, the SNEDDS was selected as the optimal nanoparticle with the highest bioavailability of aceclofenac. Thus, our nanoparticle screening technique should be an excellent guideline for solubilization research to improve the solubility and bioavailability of many poorly water-soluble bioactive materials.

Evaluation of sodium hyaluronate-based composite hydrogels for prevention of nasal adhesions.

During the healing process after intra-nasal surgery, the growth and repair of damaged tissues can result in the development of postoperative adhesions. Various techniques have been devised to minimize the occurrence of postoperative adhesions which include insertion of stents in the middle meatus, application of removable nasal packing, and utilizing biodegradable materials with antiadhesive properties. This study assesses the efficacy of two sodium hyaluronate (SH)-based freeze-dried hydrogel composites in preventing postoperative nasal adhesions, comparing them with commonly used biodegradable materials in nasal surgery. The freeze-dried hydrogels, sodium hyaluronate and collagen 1(SH-COL1) and sodium hyaluronate, carboxymethyl cellulose, and collagen 1 (SH-CMC-COL1), were evaluated for their ability to reduce bleeding time, promote wound healing, and minimize fibrous tissue formation. Results showed that SH-CMC-COL1 significantly reduced bleeding time compared to both biodegradable polyurethane foam and SH-COL1. Both SH-COL1 and SH-CMC-COL1 exhibited enhanced wound healing effects, as indicated by significantly greater wound size reduction after two weeks compared to the control. Histological analyses revealed significant differences in re-epithelialization and blood vessel count among all tested materials, suggesting variable initial wound tissue response. Although all treatment groups had more epithelial growth, with X-SCC having higher blood vessel count at 7 d post treatment, all treatment groups did not differ in all histomorphometric parameters by day 14. However, the long-term application of SH-COL1 demonstrated a notable advantage in reducing nasal adhesion formation compared to all other tested materials. This indicates the potential of SH-based hydrogels, particularly SH-COL1, in mitigating postoperative complications associated with nasal surgery. These findings underscore the versatility and efficacy of SH-based freeze-dried hydrogel composites for the management of short-term and long-term nasal bleeding with an anti-adhesion effect. Further research is warranted to optimize their clinical use, particularly in understanding the inflammatory factors influencing tissue adhesions and assessing material performance under conditions mimicking clinical settings. Such insights will be crucial for refining therapeutic approaches and optimizing biomaterial design, ultimately improving patient outcomes in nasal surgery.

Isothiocyanate-Based Microemulsions Loaded into Biocompatible Hydrogels as Innovative Biofumigants for Agricultural Soils.

Biofumigation was proposed as an alternative to synthetic pesticides for the disinfection of agricultural soils, in view of the biocidal effect of isothiocyanates (ITCs) released by some vegetal species, like Brassicaceae. However, biofumigation also presents limitations; thus, a novel and viable alternative could be the direct introduction of ITCs into agricultural soils as components loaded into biodegradable hydrogels. Thus, in this work, ITCs-based microemulsions were developed, which can be loaded into porous polymer-based hydrogel beads based on sodium alginate (ALG) or sodium carboxymethyl cellulose (CMC). Three ITCs (ethyl, phenyl, and allyl isothiocyanate) and three different surfactants (sodium dodecylsulfate, Brij 35, and Tween 80) were considered. The optimal system was characterized with attenuated ATR-FTIR spectroscopy and differential scanning calorimetry to study how the microemulsion/gels interaction affects the gel properties, such as the equilibrium water content or free water index. Finally, loading and release profiles were studied by means of UV-Vis spectrophotometry. It was found that CMC hydrogel beads showed a slightly more efficient profile of micelles' release in water with respect to ALG beads. For this reason, and due to the enhanced contribution of Fe(III) to their biocidal properties, CMC-based hydrogels are the most promising in view of the application on real agricultural soils.

Investigation study of methyl violet photodegradation over alginate-carboxymethyl cellulose/titanium(IV) oxide/covalent organic frameworks bio-nanocomposite beads under ultraviolet irradiation.

Concerned about water treatment, it is of great importance to present new approaches for improving photocatalytic activity. Since photocatalysis is ubiquitous in almost all chemical manufacturing processes, the development of photocatalytic systems carries significance for our environment. In this regard, three different amounts of covalent organic frameworks decorated with titanium(IV) oxide nanoparticles (TiO2/COF hybrids) in Alginate-Carboxymethyl cellulose (Alg-CMC) blend matrix were prepared under ultrasound irradiation, which Citric acid and Calcium chloride acted as two green cross-linkages. Based on the physio-chemical analyses of these bio-nanocomposite (bio-NC) beads, the Alg-CMC blend polymer appeared to be the best candidate for a disparity of TiO2/COF hybrids. Not only did COF aid to increase the distribution of TiO2 nanoparticles, but it declined the bandgap energies. The resultant Alg-CMC/TiO2/COF (TiO2/COF = 15:6) bio-NC beads demonstrated efficient photodegradation activity towards Methyl violet (MV) under Ultraviolet light. The obtained results of scavenger studies indicated that superoxide radicals and electron agents played a major role in MV degradation. Further investigation confirmed that single oxygen addition and N-de-methylation could be two important pathways for the decomposition of MV by these bio-NC beads.

An insoluble cellulose nanofiber with robust expansion capacity protects against obesity.

An imbalance between energy intake and energy expenditure predisposes obesity and its related metabolic diseases. Soluble dietary fiber has been shown to improve metabolic homeostasis mainly via microbiota reshaping. However, the application and metabolic effects of insoluble fiber are less understood. Herein, we employed nanotechnology to design citric acid-crosslinked carboxymethyl cellulose nanofibers (CL-CNF) with a robust capacity of expansion upon swelling. Supplementation with CL-CNF reduced food intake and delayed digestion rate in mice by occupying stomach. Besides, CL-CNF treatment mitigated diet-induced obesity and insulin resistance in mice with enhanced energy expenditure, as well as ameliorated inflammation in adipose tissue, intestine and liver and reduced hepatic steatosis, without any discernible signs of toxicity. Additionally, CL-CNF supplementation resulted in enrichment of probiotics such as Bifidobacterium and decreased in the relative abundances of deleterious microbiota expressing bile salt hydrolase, which led to increased levels of conjugated bile acids and inhibited intestinal FXR signaling to stimulate the release of GLP-1. Taken together, our findings demonstrate that CL-CNF administration protects mice from diet-induced obesity and metabolic dysfunction by reducing food intake, enhancing energy expenditure and remodeling gut microbiota, making it a potential therapeutic strategy against metabolic diseases.

Glutaraldehyde crosslinked ternary carboxymethylcellulose/polyvinyl alcohol/polyethyleneimine film with enhanced mechanical properties, water resistance, antibacterial activity, and UV-shielding ability without any UV absorbents.

Despite the plethora of methods reported for fabricating ultraviolet (UV) shielding films using various UV absorbers to date, it remains a major challenge for the development of novel UV shielding films that simultaneously exhibit excellent transparency. In this work, a novel composite film (GA-x-CMC/PVA/PEI) is fabricated by integrating anionic carboxymethylcellulose (CMC), cationic polyethyleneimine (PEI), and polyvinyl alcohol (PVA) via electrostatic and hydrogen bond interactions and further cross-linking with glutaraldehyde (GA). Herein, PVA expands hydrogen bonding networks, reduces film haze, and enhances its mechanical strength. GA acts as a crosslinker in producing Schiff bases with PEI and acetals with CMC and PVA. The synthesized GA-x-CMC/PVA/PEI composite film possesses a notable amount of unsaturated -CH=N- bonds of Schiff base, resulting from the condensation of PEI and GA, which exhibit superior shielding efficiency against both UV-A and UV-B rays while maintaining exceptional transparency, visibility, and simultaneously enhancing mechanical properties and thermal stability. Notably, increasing the content of PEI leads to almost complete shielding of the entire UV spectrum (<400 nm) due to the increasing of the number of -CH=N- unsaturated bonds. Furthermore, the obtained film without any UV-shielding additives has exceptional mechanical properties, hydrophobicity, and antibacterial properties, rendering it a wide application prospect.

Preparation and Screening of SRB Gel Particles Used for Deep Purification of Acid Mine Drainage.

The progressive decline of the coal industry necessitates the development of effective treatment solutions for acid mine drainage (AMD), which is characterized by high acidity and elevated concentrations of heavy metals. This study proposes an innovative approach leveraging sulfate-reducing bacteria (SRB) acclimated to contaminated anaerobic environments. The research focused on elucidating the physiological characteristics and optimal growth conditions of SRB, particularly in relation to the pH level and temperature. The experimental findings reveal that the SRB exhibited a sulfate removal rate of 88.86% at an optimal temperature of 30 °C. Additionally, SRB gel particles were formulated using sodium alginate (SA) and carboxymethyl cellulose (CMC), and their performance was assessed under specific conditions (pH = 6, C/S = 1.5, T = 30 °C, CMC = 4.5%, BSNa = 0.4 mol/L, and cross-linking time = 9 h). Under these conditions, the SRB gel particles demonstrated an enhanced sulfate removal efficiency of 91.6%. Thermal analysis via differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) provided further insights into the stability and properties of the SRB gel spheres. The findings underscore the potential of SRB-based bioremediation as a sustainable and efficient method for AMD treatment, offering a novel and environmentally friendly solution to mitigating the adverse effects of environmental contamination.

Stimuli-Responsive Release-Active Dressing: A Promising Solution for Eradicating Biofilm-Mediated Wound Infections.

Biofilm-mediated wound infections pose a significant challenge due to the limitations of conventional antibiotics, which often exhibit narrow-spectrum activity, fail to eliminate recurrent bacterial contamination, and are unable to penetrate the biofilm matrix. While the search for alternatives has explored the use of metal nanoparticles and synthetic biocides, these solutions often suffer from unintended toxicity to surrounding tissues and lack controlled administration and release. In this study, we engineered a pH-responsive release-active dressing film based on carboxymethyl cellulose, incorporating a synthetic antibacterial molecule (SAM-17). The dressing film exhibited optimal mechanical stability for easy application and demonstrated excellent fluid absorption properties, allowing for prolonged moisturization at the site of injury. The film exhibited pH-dependent release of cargo, with 78% release within 24 h at acidic pH, enabling targeted antibacterial drug delivery within the wound microenvironment. Furthermore, the release-active film effectively eliminated repeated challenges of bacterial contamination. Remarkably, the film demonstrated a minimal toxicity profile in both in vitro and in vivo models. The film eliminated preformed bacterial biofilms, achieving a reduction of 2.5 log against methicillin-resistant Staphylococcus aureus (MRSA) and 4.1 log against vancomycin-resistant S. aureus (VRSA). In a biofilm-mediated MRSA wound infection model, this release-active film eradicated the biofilm-embedded bacteria by over 99%, resulting in accelerated wound healing. These findings highlight the potential of this film as an effective candidate for tackling biofilm-associated wound infections.

High internal phase Pickering emulsions stabilized by egg yolk-carboxymethyl cellulose as an age-friendly dysphagia food: Tracking the dynamic transition from co-solubility to coacervates.

Although protein-polysaccharide complexes with different phase behaviors all show potential for stabilizing high internal phase Pickering emulsions (HIPPEs), it is not clarified which aggregation state is more stable and age-friendly. In this study, we investigated and compared the stability and age friendliness of HIPPEs stabilized with egg yolk and carboxymethyl cellulose (EYCMC) in different phase behaviors. The results revealed differences in particle size, aggregation state, charge potential, and stability of secondary and tertiary structures of EYCMC. The behavior of EYCMC at the oil-water interface was mainly divided into three phases: rapid diffusion, permeation, and reorganization. The electrostatic interaction, kinetic hindrance, and depletion attraction were the mechanisms primarily involved in stabilizing HIPPEs by EYCMC. Rheological analysis results indicated that HIPPEs had excellent viscoelasticity, structural recovery properties and yield stress. HIPPEs were used in 3D printing, electronic nose testing, IDDSI testing and in vitro digestive simulations for the elderly, demonstrating a fine appearance, safe consumption and bioaccessibility of ß-carotene. Soluble complexes showed the best stability and age friendliness compared to other aggregated forms. This study serves as a foundational source of information for developing innovative foods utilizing HIPPEs.

Green stabilization of silver nanoparticles over the surface of biocompatible Fe3O4@CMC for bactericidal applications.

The emergence of antimicrobial resistance in bacteria, especially in agents associated with urinary tract infections (UTIs), has initiated an exciting effort to develop biocompatible nanoparticles to confront their threat. Designing simple, cheap, biocompatible, and efficient nanomaterials as bactericidal agents seems to be a judicious response to this problem. Here, a solvothermal method was hired for the one-pot preparation of the cellulose gum (carboxymethyl cellulose, CMC) magnetic composite to prepare a cost-effective, efficient, and biocompatible support for the plant-based stabilization of the silver NPs. The green stabilization of the Ag NPs is performed using Euphorbia plant extract with high efficiency. Various characterization methods, including FT-IR, XRD, SEM, EDS, TEM, and VSM were used to study the composition and properties of Fe3O4@CMC/AgNPs. The composite shows well integrity and monodispersity with a mean diameter of <300 nm, indicating its potential for bio-related application. The CMC functionalities of the proposed material facilitated the stabilization of the Ag NPs, resulting in their monodispersity and enhanced performance. The manufactured composite was used as an antibacterial agent for the removal of UTIs agents, collected from 200 hospitalized patients with acute coronary syndrome, which showed promising results. This study showed that the concentration of the Ag NPs has a direct relationship with the antibacterial properties of the composite.

Green synthesis of non-isocyanate hydroxyurethane and its hybridization with carboxymethyl cellulose to produce films.

Non-isocyanate polyurethanes (NIPUs) have attracted increasing attention as a sustainable alternative to conventional isocyanate-based polyurethanes. This study synthesized non-isocyanate hydroxyurethanes (NIHUs) through an addition reaction between propylene carbonate (PC) and 1,2-ethylenediamine (EDA). The resulting NIHU was then hybridized with carboxymethyl cellulose (CMC) to investigate its hybridization potential. Structural analysis through FTIR, NMR, and XRD confirmed the crystalline nature of NIHU, featuring urethane bonds and abundant hydroxyl groups. It was found that NIHU and CMC interacted by forming hydrogen bonds between hydroxyl groups of NIHU and carboxyl groups of CMC, resulting in a dense CMC/NIHU hybrid structure. NMR and XRD analyses revealed changes in the hybrids' chain mobility, the Young's modulus of the hybrid with 30 % NIHU content decreased from 1627 MPa to 502 MPa relative to CMC, and the elongation at break increased from 4.44 % to 17.2 %. Increasing the concentration of NIHU in CMC reduced the hydrophobicity, in terms of water contact angle, from 70° to 41.7°. The simplicity of the synthesis method for NIHU, coupled with the desirable structure, strength, and balanced flexibility of CMC/NIHU hybrids, is expected to facilitate the production of NIHU-rich hybrids and increase their application in packaging.

Fabrication of black wolfberry anthocyanin-based hydrogels for monitoring freshness and extending shelf-life of Dolang lamb.

In this study, a black wolfberry anthocyanin-based indication label (BWIL) was developed using black wolfberry pigment (BWP) in combination with polyvinyl alcohol (PVA) and carboxymethyl cellulose (CMC) (PVA:CMC = 4:3). The potential use of BWIL for monitoring the freshness of Dorang lamb was further investigated. As revealed, physical cross-linking occurred between PVA, CMC and BWP during the preparation of BWIL. The addition of BWP promoted the internal cross-linking, porosity, and thermal stability of BWIL significantly (p < 0.05). Specifically, BWIL showed a distinct color change when exposed to the refrigerated conditions of Dorang lamb. After 6 days, 12 days and 16 days of lamb refrigeration, the ΔE of BWIL was 26.3, 28.6 and 30.7, respectively, which far exceeded the human eyes' color threshold discernible (ΔE = 3.5). Besides, the ΔE of BWIL was significantly correlated with pH, fat oxidation, and TVB-N content of Dorang lamb (p < 0.05). This result indicated that BWIL could be used for identifying the freshness of lamb accurately. Importantly, the shelf-life of lamb with BWIL was extended from 6 days to 16 days, which suggests that BWIL would be an effective tool for real-time freshness monitoring and shelf-life extending of Dorang lamb.

Bromelain Immobilized onto Clay-Carboxymethylcellulose Composites for Improving Nutritive Value of Soybean Meal.

Improvement of nutritional value and reduction of antinutritional factors (ANFs) of soybean meal (SBM) for animal feed applications could be achieved by using bromelain immobilized onto bentonite (Bt)-carboxymethylcellulose (CMC) composites. The composite with mass ratio between CMC to calcium ion (Ca2+) at 1:20 provided the highest enzyme activity, immobilization yield higher than 95%, with superior thermal and storage stabilities. Performance of the immobilized bromelain for soybean protein hydrolysis was further studied. The results showed that at 60 °C, the immobilized bromelain exhibited the highest efficiency in enzymatic hydrolysis to release free alpha amino nitrogen (FAN) as a product with high selectivity and to effectively reduce SBM allergenic proteins within 30 min. In conclusion, immobilization of bromelain onto Bt-CMC composites leads to stability enhancement of the enzyme, enabling effective improvement in SBM quality in a short treatment time and showing great potential for application in animal feed industries.

Application of fluorescent carbon quantum dots functional modified carboxymethyl cellulose film in toluene gas specific detection.

With the increasing consumption of organic solvents in chemical and pharmaceutical industries, the environment pollution of volatile organic compounds (VOCs) has become an urgent problem. Therefore, the rapid-visual detection method is of great significance in the analysis of VOCs. Based on the fluorescence quenching/enhancement mechanism of carbon quantum dots (CQDs), with the help of carboxymethyl cellulose membrane with porous and large specific surface area structure, a series of green CQDs@carboxymethyl cellulose composite film (CQDs@CMC composite film) was prepared in this study. In the typical-targeted pollutants (toluene) detection application, a fluorescence spectroscopy method was established which could achieve the high sensitivity and strong specificity detection. The mainly conclusions were as follows: The fluorescence spectrometric detection method for toluene: A kind of hydrophobic Lmi/Bet CQDs@CMC composite film was prepared and characterized with imidazole/betaine CQDs and porous carboxymethyl cellulose composite film as raw materials. The toluene detection performance was studied, and the recognition mechanism was explored. The results showed that toluene enhanced the fluorescence of Lmi/Bet CQDs@CMC composite film. The fluorescence intensity of composite films was proportional to toluene concentration when the toluene concentration ranged from 200 to 2200 mg/L. The detection limit of toluene was 1.169 mg/L, which provides a theoretical basis for the detection of toluene by fluorescence spectrometry.

Strain-Temperature Dual Sensor Based on Deep Learning Strategy for Human-Computer Interaction Systems.

Thermoelectric (TE) hydrogels, mimicking human skin, possessing temperature and strain sensing capabilities, are well-suited for human-machine interaction interfaces and wearable devices. In this study, a TE hydrogel with high toughness and temperature responsiveness was created using the Hofmeister effect and TE current effect, achieved through the cross-linking of PVA/PAA/carboxymethyl cellulose triple networks. The Hofmeister effect, facilitated by Na+ and SO42- ions coordination, notably increased the hydrogel's tensile strength (800 kPa). Introduction of Fe2+/Fe3+ as redox pairs conferred a high Seebeck coefficient (2.3 mV K-1), thereby enhancing temperature responsiveness. Using this dual-responsive sensor, successful demonstration of a feedback mechanism combining deep learning with a robotic hand was accomplished (with a recognition accuracy of 95.30%), alongside temperature warnings at various levels. It is expected to replace manual work through the control of the manipulator in some high-temperature and high-risk scenarios, thereby improving the safety factor, underscoring the vast potential of TE hydrogel sensors in motion monitoring and human-machine interaction applications.

Carboxymethyl cellulose-based photothermal film: A sustainable packaging with high barrier and tensile strength for food long-term antibacterial protection.

Traditional packaging materials feed the growing global food protection. However, these packaging materials are not conducive to environment and have not the ability to kill bacteria. Herein, a green and simple strategy is reported for food packaging protection and long-term antibacterial using carboxymethylcellulose-based photothermal film (CMC@CuS NPs/PVA) that consists of carboxymethyl cellulose (CMC) immobilized copper sulfide nanoparticles (CuS NPs) and polyvinyl alcohol (PVA). With satisfied oxygen transmittance (0.03 cc/m2/day) and water vapor transmittance (163.3 g/m2/day), the tensile strength, tear strength and burst strength reached to 3401.2 N/m, 845.7 mN and 363.6 kPa, respectively, which could lift 4.5 L of water. The composite film had excellent photothermal conversion efficiency and photothermal stability. Under the irradiation of near infrared (NIR), it can rapidly heated up to 197 °C within 25 s. The antibacterial analysis showed that the inhibition rate of composite film against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) could all reach >99 %. Furthermore, the synthesized CuS NPs was well immobilized and the residual rate of copper kept 98.7 % after 10 days. Noticeably, the composite film can preserve freshness of strawberries for up to 6 days. Therefore, the composite film has potential application for food antibacterial protection.