Sodium carboxymethyl cellulose hydrogels containing montmorillonite-NaClO2 for postharvest preservation of Chinese bayberries.

Owing to their lack of outer skin, Chinese bayberries are highly susceptible to mechanical damage during picking, which accelerates bacterial invasion and rotting, shortening their shelf life. In this study, montmorillonite (MMT) was used to absorb an aqueous sodium chlorite solution embedded in a carboxymethyl cellulose sodium hydrogel after freeze drying, and the hydrogel was crosslinked by Al3+ ions. Al3+ hydrolyzed to produce H+, creating an acidic environment within the hydrogel and reacting with NaClO2 to slowly release ClO2. We prepared a ClO2 slow-release hydrogel gasket with 0.5 wt% MMT-NaClO2 and investigated its storage effect on postharvest Chinese bayberries. Its inhibition rates against Escherichia coli and Listeria monocytogenes were 98.84% and 98.96%, respectively. The results showed that the gasket preserved the appearance and nutritional properties of the berries. The antibacterial hydrogel reduced hardness loss by 26.57% and ascorbic acid loss by 46.36%. This new storage method could also be applicable to other fruits and vegetables.

Designing and synthesis of injectable hydrogel based on carboxymethyl cellulose/carboxymethyl chitosan containing QK peptide for femoral head osteonecrosis healing.

Femoral head necrosis is a debilitating disorder that typically caused by impaired blood supply to the hip joint. In this study, a novel injectable hydrogel based on Oxidized Carboxymethyl Cellulose (OCMC)-Carboxymethyl Chitosan (CMCS) polymers containing an angiogenesis stimulator peptide (QK) with a non-toxic crosslinking interaction (Schiff based reaction) was synthesized to enhance angiogenesis following femoral head necrosis in an animal model. The physicochemical features of fabricated injectable hydrogel were analyzed by FTIR, swelling and degradation rate, rheometry, and peptide release. Also, the safety and efficacy were evaluated following an in vitro hydrogel injection study and an avascular necrosis (AVN) animal model. According to the results, the hydrogel exhibited an appropriate swelling ratio and water uptake (>90 %, 24 h) as well as a suitable degradation rate over 21 days accompanied by a continuous peptide release. Also, data showed that hydrogels containing QK peptide boosted the proliferation, differentiation, angiogenesis, and osteogenic potential of both Bone Marrow mesenchymal Stem Cells (BM-MSCs) and human umbilical vein endothelial cells (HUVECs) (****p < 0.0001 and ***p < 0.001, respectively). Furthermore, molecular and histological evaluations significantly demonstrated the overexpression of Runx2, Osteocalcin, Collagen I, VEGF and CD34 genes (**p < 0.01 and ***p < 0.001, respectively), and also femoral head necrosis was effectively prohibited, and more blood vessels were detected in defect area by OCMC-CMCS hydrogel containing QK peptide (bone trabeculae >9000, ***p < 0.001). In conclusion, the findings demonstrate that OCMC-CMCS-QK injectable hydrogel could be considered as an impressive therapeutic construct for femoral head AVN healing.

Asymmetric chitosan-derivative/carboxymethylcellulose layer-by-layer film combining antimicrobial and vascular regeneration for the repair of infected wounds.

Bacterially infected wounds are a serious threat to patients' lives and health, and multifunctional dressings with antimicrobial properties and healing promotion are urgently needed. Thus, we used the cationic and anionic properties of chitosan (CS)-nerol (N) derivative (CSN) and carboxymethylcellulose (CMC) to prepare asymmetric layer-by-layer self-assembled (LBL) composite films (CSN-CMC LBL films) with antibacterial and healing properties using a spin-coating method. SEM images showed that the CSN-CMC LBL films had completely different degrees of roughness at the bottom (hydrophilic layer) and at the top (hydrophobic layer), with the roughness at the top increasing as the number of layers increased. The CSN and CMC were used to prepare asymmetric LBL films via the electrostatic attraction of -COO- and NH3+. In addition, adhesion and water contact angle tests showed that the CSN-CMC LBL films had enhanced tissue adhesion and good hydrophobicity. These materials had excellent antimicrobial activity and good biocompatibility. Importantly, the animal infection model results showed that CSN-CMC-8 LBL films effectively eliminated the infection in vivo, inhibited inflammation, promoted vascular regeneration, accelerated the epithelialization process, and achieved high quality healing. Overall, the CSN-CMC LBL films in this study showed considerable potential for application in infected wound healing.

Multicomponent Synergistic Antibacterial Hydrogel Based on Gelatin-Oxidized Carboxymethyl Cellulose for Wound Healing of Drug-Resistant Chronic Infection.

Bacterial invasion hinders the healing process of wound, leading to the formation of chronic infected wound; meanwhile, the misuse of antibiotics has resulted in the emergence of numerous drug-resistant bacteria. The application of conventional antimicrobial methods and wound treatment techniques is not appropriate for wound dressings. In this paper, quaternized poly(vinyl alcohol) (QPVA) and pomegranate-like copper uniformly doped polydopamine nanoparticles (PDA@Cu) were introduced into a gelatin-oxidized carboxymethyl cellulose system to form a multicomponent synergistic antibacterial hydrogel (GOQ3P3). Polydopamine improves the biocompatibility and prevents the detachment of Cu nanoparticles. It can achieve synergistic antibacterial effects through quaternary ammonium salt-inorganic nanoparticle photothermal treatment under 808 nm near-infrared (NIR) irradiation. It exhibits highly efficient and rapid bactericidal properties against Escherichia coli, Staphylococcus aureus, and MRSA (methicillin-resistant Staphylococcus aureus) with an antibacterial rate close to 100%. The gel scaffold composed of macromolecules gives the hydrogel excellent mechanical properties, adhesive capabilities, self-healing characteristics, biocompatibility, and pH degradation and promotes cell adhesion and migration. In a full-thickness wound healing model infected with MRSA, GOQ3P3 controls inflammatory responses, accelerates collagen deposition, promotes angiogenesis, and enhances wound closure in the wound healing cascade reaction. This study provides a feasible strategy for constructing dressings targeting chronic infection wounds caused by drug-resistant bacteria.

Mucoadhesive phenylboronic acid-grafted carboxymethyl cellulose hydrogels containing glutathione for treatment of corneal epithelial cells exposed to benzalkonium chloride.

Benzalkonium chloride (BAK) is the most commonly-used preservative in topical ophthalmic medications that may cause ocular surface inflammation associated with oxidative stress and dry eye syndrome. Glutathione (GSH) is an antioxidant in human tears and able to decrease the proinflammatory cytokine release from cells and reactive oxygen species (ROS) formation. Carboxymethyl cellulose (CMC), a hydrophilic polymer, is one of most commonly used artificial tears and can promote the corneal epithelial cell adhesion, migration and re-epithelialization. However, most of commercial artificial tears provide only temporary relief of irritation symptoms and show the short-term treatment effects. In the study, 3-aminophenylboronic acid was grafted to CMC for increase of mucoadhesive properties that might increase the precorneal retention time and maintain the effective therapeutic concentration on the ocular surface. CMC was modified with different degree of substitution (DS) and characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. Phenylboronic acid (PBA)-grafted CMC hydrogels have interconnected porous structure and shear thinning behavior. Modification of CMC with high DS (H-PBA-CMC) shows the strong bioadhesive force. The optimal concentration of GSH to treat corneal epithelial cells (CECs) was evaluated by cell viability assay. H-PBA-CMC hydrogels could sustained release GSH and decrease the ROS level. H-PBA-CMC hydrogels containing GSH shows the therapeutic effects in BAK-damaged CECs via improvement of inflammation, apoptosis and cell viability. After topical administration of developed hydrogels, there was no ocular irritation in rabbits. These results suggested that PBA-grafted CMC hydrogels containing GSH might have potential applications for treatment of dry eye disease.

Assessment of the ability of Pseudomonas aeruginosa and Staphylococcus aureus to create biofilms during wound healing in a rat model treated with carboxymethyl cellulose/carboxymethyl chitosan hydrogel containing EDTA.

The primary objective of this study was to develop a carboxymethyl cellulose (CMC) and carboxymethyl chitosan (CMCS) hydrogel containing ethylene diamine tetra acetic acid (EDTA) as the materials for wound healing. CMC and CMCS solutions were prepared with a concentration of 4% (w/v). These solutions were made using normal saline serum with a concentration of 0.5% (v/v). Additionally, EDTA with the concentrations of 0.01%, 0.05%, 0.1%, 0.5%, 1%, and 2% (w/v) was included in the prepared polymer solution. The analysis of the hydrogels revealed that they possess porous structures with interconnected pores, with average in size 88.71 ± 5.93 µm. The hydrogels exhibited a swelling capacity of up to 60% of their initial weight within 24 h, as indicated by the weight loss and swelling measurements. The antibacterial experiments showed that the formulated CMC/CMCS/EDTA 0.5% hydrogel inhibited the growth of Staphylococcus aureus and Pseudomonas aeruginosa. Moreover, the produced hydrogels were haemocompatible and biocompatible. At the last stage, the evaluation of wound healing in the animal model demonstrated that the use of the produced hydrogels significantly improved the process of wound healing. Finally, the findings substantiated the effectiveness of the formulated hydrogels as the materials for promoting wound healing and antibacterial agents.

Synthesis, characterization, and investigation of antibacterial activity of Novel CMC/CuO NPs/CQDs bionanocomposite coating.

In recent decades, healthcare-associated infections (HAIs) have become a common problem in healthcare facilities such as hospitals. As a result, researchers are currently developing nanocomposite coatings that are strengthened with antibacterial nanoparticles. In this research, a novel antibacterial bionanocomposite coating based on carboxymethyl cellulose polymer/copper oxide nanoparticles/carbon quantum dots was coated on medical grade 316 stainless steel by sol-gel dip-coating method. The effect of the concentration of nanocomposite components was investigated at four different levels to determine the best ratio with the most antibacterial activity. Structural characteristics of nanocomposite and coating were investigated using different analysis methods. The coating analysis showed that reinforcements are uniformly distributed in the polymer matrix. Antibacterial test of disc diffusion was performed by the Kirby-Bauer method and minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) antibacterial test. The results showed that bionanocomposite was effective in the MIC assays against Staphylococcus aureus and Escherichia coli with MIC values of 25 mg/ml and >50 mg/ml, respectively. The inhibition zones for E. coli and S. aureus were 17 and 32 mm, respectively, at 10 µg/disc of gentamicin. SEM images displayed significant and evident alterations in the structure of bacterial morphology, indicating cellular damage.

Study on synergistic mechanism of molybdenum disulfide/sodium carboxymethyl cellulose composite nanofiber mats for photothermal/photodynamic antibacterial treatment.

Innovative antibacterial therapies using nanomaterials, such as photothermal (PTT) and photodynamic (PDT) treatments, have been developed for treating wound infections. However, creating secure wound dressings with these therapies faces challenges. The primary focus of this study is to prepare an antibacterial nanofiber dressing that effectively incorporates stable loads of functional nanoparticles and demonstrates an efficient synergistic effect between PTT and PDT. Herein, a composite nanofiber mat was fabricated, integrating spherical molybdenum disulfide (MoS2) nanoparticles. MoS2 was deposited onto polylactic acid (PLA) nanofiber mats using vacuum filtration, which was further stabilized by sodium carboxymethyl cellulose (CMC) adhesion and glutaraldehyde (GA) cross-linking. The composite nanofibers demonstrated synergistic antibacterial effects under NIR light irradiation, and the underlying mechanism was explored. They induce bacterial membrane permeability, protein leakage, and intracellular reactive oxygen species (ROS) elevation, ultimately leading to >95 % antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), which is higher than that of single thermotherapy (almost no antibacterial activity) or ROS therapy (about 80 %). In addition, the composite nanofiber mats exhibited promotion effects on infected wound healing in vivo. This study demonstrates the great prospects of composite nanofiber dressings in clinical treatment of bacterial-infected wounds.

Bioinspired wet adhesive carboxymethyl cellulose-based hydrogel with rapid shape adaptability and antioxidant activity for diabetic wound repair.

Currently, adhesive hydrogels have shown promising effect in chronic diabetic wound repair. However, there are issues and challenges in treating diabetic wounds due to inadequate wet adhesion, unable to fill irregular and deep wounds, and oxidative stress. Herein, a mussel-inspired naturally hydrogel dressing with rapid shape adaptability, wet adhesion and antioxidant abilities for irregular, deep and frequently movement diabetic wounds repair was constructed by comprising catechol modified carboxymethyl cellulose (CMC-DA) and tannic acid. Benefiting from the reversible hydrogen bonding, the resulting hydrogels exhibited injectability, remarkable self-healing ability, rapid shape adaptability and strong tissue adhesion (45.9 kPa), thereby contributing to self-adaptive irregular-shaped wounds or moving joint parts. Especially, the adhesion strength of the hydrogel on wet tissue still remained at 14.9 kPa. Besides, the hydrogels could be easily detached from the skin by ice-cooling that avoided secondary damage caused by dressing change. Remarkably, the hydrogels possessed excellent antioxidant, satisfactory biocompatibility, efficient hemostasis and antibacterial properties. The in vivo evaluation further demonstrated that the hydrogel possessed considerable wound-healing promotion effect by regulating diabetic microenvironment, attributed to that the hydrogel could significantly reduce inflammatory response, alleviate oxidative stress and regulate neovascularization. Overall, this biosafe adhesive hydrogel had great potentials for diabetic wound management.

Enhancing maize resilience to drought stress: the synergistic impact of deashed biochar and carboxymethyl cellulose amendment.

Drought stress poses a significant challenge to maize production, leading to substantial harm to crop growth and yield due to the induction of oxidative stress. Deashed biochar (DAB) in combination with carboxymethyl cellulose (CMC) presents an effective approach for addressing this problem. DAB improves soil structure by increasing porosity and water retention and enhancing plant nutrient utilization efficiency. The CMC provides advantages to plants by enhancing soil water retention, improving soil structure, and increasing moisture availability to the plant roots. The present study was conducted to investigate the effects of DAB and CMC amendments on maize under field capacity (70 FC) and drought stress. Six different treatments were implemented in this study, namely 0 DAB + 0CMC, 25 CMC, 0.5 DAB, 0.5 DAB + 25 CMC, 1 DAB, and 1 DAB + 25 CMC, each with six replications, and they were arranged according to a completely randomized design. Results showed that 1 DAB + 25 CMC caused significant enhancement in maize shoot fresh weight (24.53%), shoot dry weight (38.47%), shoot length (32.23%), root fresh weight (19.03%), root dry weight (87.50%) and root length (69.80%) over control under drought stress. A substantial increase in maize chlorophyll a (40.26%), chlorophyll b (26.92%), total chlorophyll (30.56%), photosynthetic rate (21.35%), transpiration rate (32.61%), and stomatal conductance (91.57%) under drought stress showed the efficiency of 1 DAB + 25 CMC treatment compared to the control. The enhancement in N, P, and K concentrations in both the root and shoot validated the effectiveness of the performance of the 1 DAB + 25 CMC treatment when compared to the control group under drought stress. In conclusion, it is recommended that the application of 1 DAB + 25 CMC serves as a beneficial amendment for alleviating drought stress in maize.

Bio-nanocomposite active packaging films based on carboxymethyl cellulose, myrrh gum, TiO2 nanoparticles and dill essential oil for preserving fresh-fish (Cyprinus carpio) meat quality.

This study developed a composite film for packaging refrigerated common carp fillets using carboxymethyl cellulose (CMC) (1.5 % w/v)/Myrrh gum (MG) (0.25 % w/v) base with the addition of titanium dioxide nanoparticles (TiO2 NPs) (0.25 %, 0.5 %, and 1 %) and Dill essential oil (DEO) (1.5 %, 2.25 %, and 3 %). The film was produced using a casting method and optimized for mechanical and barrier properties. The incorporation of DEO and TiO2 NPs into CMC/MG composite films significantly reduced moisture content (MC) and water vapor permeability (WVP), improved their tensile strength (TS), and increased their antimicrobial and antioxidant properties. Moreover, MG can improve the physicomechanical properties of the CMC/MG composite films. The film components had good compatibility without significant aggregation or cracks. In conclusion, the optimized CMC/MG (1.5 %/0.25 %) film containing TiO2 NPs (0.5 %), and DEO (2.25 %) has the best overall performance and can be a good source for making edible film. Functionally, this bioactive nanocomposite film significantly increased the shelf life of refrigerated fish fillet samples for 12 days by inhibiting microbial growth and reducing the oxidation rate compared to the control sample. The knowledge obtained from this study can guide the development of bio-nanocomposite and biodegradable food packaging films based on CMC/MG to increase the shelf life of food products and environmental protection.

Study on Synergistic Effects of Nanohydroxyapatite/High-Viscosity Carboxymethyl Cellulose Scaffolds Stimulated by LIPUS for Bone Defect Repair of Rats.

Despite the self-healing capacity of bone, the regeneration of critical-size bone defects remains a major clinical challenge. In this study, nanohydroxyapatite (nHAP)/high-viscosity carboxymethyl cellulose (hvCMC, 6500 mPa·s) scaffolds and low-intensity pulsed ultrasound (HA-LIPUS) were employed to repair bone defects. First, hvCMC was prepared from ramie fiber, and the degree of substitution (DS), purity, and content of NaCl of hvCMC samples were 0.91, 99.93, and 0.017%, respectively. Besides, toxic metal contents were below the permissible limits for pharmaceutically used materials. Our results demonstrated that the hvCMC is suitable for pharmaceutical use. Second, nHAP and hvCMC were employed to prepare scaffolds by freeze-drying. The results indicated that the scaffolds were porous, and the porosity was 35.63 ± 3.52%. Subsequently, the rats were divided into four groups (n = 8) randomly: normal control (NC), bone defect (BD), bone defect treated with nHAP/hvCMC scaffolds (HA), and bone defect treated with nHAP/hvCMC scaffolds and stimulated by LIPUS (HA-LIPUS). After drilling surgery, nHAP/hvCMC scaffolds were implanted in the defect region of HA and HA-LIPUS rats. Meanwhile, HA-LIPUS rats were treated by LIPUS (1.5 MHz, 80 mW cm-2) irradiation for 2 weeks. Compared with BD rats, the maximum load and bone mineral density of HA-LIPUS rats were increased by 20.85 and 51.97%, respectively. The gene and protein results indicated that nHAP/hvCMC scaffolds and LIPUS promoted the bone defect repair and regeneration of rats significantly by activating Wnt/ß-catenin and inhibiting OPG/RANKL signaling pathways. Overall, compared with BD rats, nHAP/hvCMC scaffolds and LIPUS promoted bone defect repair significantly. Furthermore, the research results also indicated that there are synergistic effects for bone defect repair between the nHAP/hvCMC scaffolds and LIPUS.

A ternary composite hydrogel based on sodium alginate, carboxymethyl cellulose and copper-doped 58S bioactive glass promotes cutaneous wound healing in vitro and in vivo.

Hydrogels offer a novel approach to wound repair. In this study, we synthesized a ternary composite using sodium alginate (SA), carboxymethyl cellulose (CMC) and copper-doped 58S bioactive glass (BG). According to our mechanical testing results, the composite made of 7 wt% CMC and 7 wt% BG (SA-7CMC-7BG) showed optimal properties. In addition, our in vitro studies revealed the biocompatibility and bioactivity of SA-7CMC-7BG, with a negative zeta potential of -31.7 mV. Scanning electron microscope (SEM) images showed 273-µm-diameter pores, cell adhesion, and anchoring. The SA-7CMC-7BG closed 90.4 % of the mechanical scratch after 2 days. An in vivo wound model using Wistar rats showed that SA-7CMC-7BG promoted wound healing, with 85.57 % of the wounds healed after 14 days. Treatment with the SA-7CMC-7BG hydrogel caused a 1.6-, 65-, and 1.87-fold increase in transforming growth factor beta (TGF-ß), Col I, and vascular endothelial growth factor (VEGF) expression, respectively that prevents fibrosis and promotes angiogenesis. Furthermore, interleukin 1ß (IL-1ß) expression was downregulated by 1.61-fold, indicating an anti-inflammatory effect of SA-7CMC-7BG. We also observed an increase in epidermal thickness, the number of fibroblast cells, and collagen deposition, which represent complementary pathology results confirming the effectiveness of the SA-7CMC-7BG hydrogel in cutaneous wound healing.

Gelatin/carboxymethylcellulose composite film combined with photodynamic antibacterial: New prospect for fruit preservation.

Plastic packaging causes environmental pollution, and the development of simple and effective biodegradable active packaging remains a challenge. In this study, gelatin (G) and sodium carboxymethylcellulose (CMC) were used as film materials, with the addition of curcumin (Cur), a photosensitive substance, to investigate the changes in the physical and chemical properties of the film and its application in fruit preservation. The results demonstrated that Cur was compatible with the film. With the addition of Cur, the thickness of the film increased up to 1.3 times, while the moisture content was reduced to 12.10 %. The tensile strength (TS) and elongation at break (EAB) of the film can reach 8.84 MPa and 19.33 %, respectively. The photodynamic antibacterial experiment revealed that the film containing 0.5 % Cur exhibited the highest antibacterial rate, reaching 99.99 % against Staphylococcus aureus (S. aureus) and 95 % against Escherichia coli (E. coli). During storage, the grapes remained unspoiled for up to 9 days after being phototreated with the film and the microbial content of the skin was much lower than that of the control group. In addition, Cur provided antioxidant activity for the film, with a scavenging activity of 39.54 % against the 2,2-diphenyl-1-picrind radical (DPPH). Bananas exposed to the film-forming solution for a short period of time remained fresh for up to 6 days. During preservation, the weight of the treated bananas decreased more slowly than that of the control group. In addition, the activity of SOD on the 7th day was approximately 20 U/g higher than that of the control group, which helped to reduce oxidative stress during banana preservation. In summary, G-CMC/Cur film is an optional fruit-cling film that can be used in food packaging.

Layer by layer application of chitosan and carboxymethyl cellulose coatings delays ripening of mango fruit by suppressing cell wall polysaccharides disassembly.

Mango is a climacteric fruit that ripens quickly after harvest due to its climacteric nature. Edible coatings have been reported to delay the ripening of various harvested fruit. The efficacy of the applied edible coatings could be improved by using in combination as a layer-by-layer (LBL) approach. So, the influence of LBL application of chitosan (CH) and carboxymethyl cellulose (CMC) was studied on mangoes during postharvest storage at 15 °C for 20 days. Mangoes were coated with monolayers of CH (1 % w/v) and CMC (1 % w/v) as well as LBL application of CH and CMC and were compared with control. The treatment of mangoes with CH and CMC-based LBL treatment resulted in lower decay percentage and weight loss along with higher total chlorophyll pigments and suppressed total carotenoid accumulation. The LBL application of CH and CMC showed lower activity of chlorophyll degrading such as chlorophyllase (CPS), pheophytinase (Phe), Mg-dechalatase (MGD) and chlorophyll degrading peroxidase (Chl-POD) enzymes as well as reduced changes in b*, a* and L* along with a suppressed increase in ethylene (EP) and CO2 production (CPR) rates having higher antioxidant such as catalase (CAT), ascorbate peroxidase (APX), peroxidase (POD) and superoxide dismutase (SOD) enzymes activity. In addition, mangoes coated with LBL treatment of CH and CMC exhibited lower water-soluble pectin (WSP) and higher protopectin (PP) having higher concentrations of chelate soluble (CSP) and sodium carbonate-soluble pectin (SCP). Similarly, LBL-coated mangoes showed significantly higher hemicellulose (HCLS) and cellulose (CLS) contents in contrast with control. It was observed that mangoes coated with CH and CMC-based LBL coating exhibited higher flesh firmness and showed suppressed cellulase (CS), pectin methylesterase (PME), polygalacturonase (PG) and ß-galactosidase (ß-Gal) enzymes activity. The concentrations of total soluble solids and ripening index were markedly lower and titratable acidity was higher in the LBL-based coating treatment in comparison with control. In conclusion, LBL treatment based on CH and CMC coatings could be used for the delay of ripening and softening of harvested mangoes.

Biogenic synthesis of dopamine/carboxymethyl cellulose/TiO2 nanoparticles using Psidium guajava leaf extract with enhanced antimicrobial and anticancer activities.

The green synthesis of metal oxide nanoparticles (NPs) has garnered considerable attention from researchers due to its utilization of eco-friendly solvents during synthesis and cost-effective approaches. This study focuses on the synthesis of titanium oxide (TiO2) and dopamine (DA) carboxymethyl cellulose (CMC)-doped TiO2 (DA/CMC/TiO2) NP using Psidium guajava leaf extract, while also investigating the structural, optical, and morphological and biocidal potential of the prepared NPs. Significantly larger zones of inhibition were observed for DA/CMC/TiO2 NPs compared to TiO2 against various pathogens. Moreover, the MTT assay was carried out to evaluate the anticancer activity of the prepared samples against MG-63 cells, and the results revealed that DA/CMC/TiO2 NPs exhibited significantly higher level of anticancer activity compared to TiO2. The experimental results demonstrated that DA/CMC/TiO2 NPs exhibited enhanced anticancer activity in a dose-dependent manner when compared to TiO2 NPs.

Facile fabrication of carboxymethylcellulose/ZnO/g-C3N4 containing nutmeg extract with photocatalytic performance for infected wound healing.

New topical antibacterial agents are required to inhibit and development of bacteria and also promoting the wound healing process. This study was evaluating the healing effect of Myristica fragrans extract coated with carboxymethyl cellulose, zinc oxide and graphite carbon nitride (CMC/ZnO/g-C3N4/MyR) by photocatalytic process on the healing process of full-thickness infectious excision wounds in mice. Nanosheets were prepared and physicochemical properties were evaluated. Safety, in vitro release, antibacterial activities under in vitro and in vivo condition, wound contraction, histopathological properties and the protein expressions of tumor necrosis factor-α (TNF-α), collagen 1A (COL1A) and CD31 were also evaluated. Physicochemical properties confirmed their successful synthesis. Nanosheets exhibited antibacterial activity under in vitro and in vivo conditions. The formulations containing CMC/ZnO/g-C3N4/MyR, significantly (P < 0.05) competed with standard ointment of mupirocin for accelerating the wound healing process due to their effects on bacterial count and the expression of TNF-α and also accelerating the proliferative phase. This structure can be used as a safe structure in combination with other agents for accelerating the wound healing process following future clinical studies.

Carboxymethylcellulose/Agar-Based Multifunctional Films Incorporated with Zn-Doped SnO2 Nanoparticles for Active Food Packaging Application.

SnO2 and Zn-SnO2 nanoparticles were prepared by chemical precipitation, and the rutile phase of SnO2 was confirmed through X-ray diffraction studies. X-ray photoelectron spectroscopy (XPS) confirmed the doping of SnO2 with Zn and elucidated the surface chemistry before and after doping. The average sizes of SnO2 and Zn-SnO2 nanoparticles determined using TEM were 3.96 ± 0.85 and 3.72 ± 0.9 nm, respectively. UV-visible and photoluminescence spectrophotometry were used to evaluate the optical properties of SnO2 and Zn-SnO2 nanoparticles, and their energy gaps (Eg) were 3.8 and 3.9 eV, respectively. The antibacterial activity of these nanoparticles against Salmonella enterica and Staphylococcus aureus was evaluated under dark and light conditions. Antibacterial activity was higher in light, showing the highest activity (99.5%) against S. enterica. Carboxymethylcellulose (CMC)/agar-based functional composite films were prepared by adding different amounts of SnO2 and Zn-SnO2 nanoparticles (1 and 3 wt % of polymers). The composite film showed significantly increased UV barrier properties while maintaining the mechanical properties, water vapor barrier, and transparency compared to the neat CMC/agar film. These composite films showed significant antibacterial activity; however, the Zn-SnO2-added film showed stronger antibacterial activity (99.2%) than the SnO2-added film (15%).

Decellularized allogeneic cartilage paste with human costal cartilage and crosslinked hyaluronic acid-carboxymethyl cellulose carrier augments microfracture for improved articular cartilage repair.

Articular cartilage lacks natural healing abilities and necessitates surgical treatments for injuries. While microfracture (MF) is a primary surgical approach, it often results in the formation of unstable fibrocartilage. Delivering hyaline cartilage directly to defects poses challenges due to the limited availability of autologous cartilage and difficulties associated with allogeneic cartilage delivery. We developed a decellularized allogeneic cartilage paste (DACP) using human costal cartilage mixed with a crosslinked hyaluronic acid (HA)-carboxymethyl cellulose (CMC) carrier. The decellularized allogeneic cartilage preserved the extracellular matrix and the nanostructure of native hyaline cartilage. The crosslinked HA-CMC carrier provided shape retention and moldability. In vitro studies confirmed that DACP did not cause cytotoxicity and promoted migration, proliferation, and chondrogenic differentiation of human bone marrow-derived mesenchymal stem cells. After 6 months of implantation in rabbit knee osteochondral defects, DACP combined with MF outperformed MF alone, demonstrating improved gait performance, defect filling, morphology, extracellular matrix deposition, and biomechanical properties similar to native cartilage. Thus, DACP offers a safe and effective method for articular cartilage repair, representing a promising augmentation to MF. STATEMENT OF SIGNIFICANCE: Directly delivering hyaline cartilage to repair articular cartilage defects is an ideal treatment. However, current allogeneic cartilage products face delivery challenges. In this study, we developed a decellularized allogeneic cartilage paste (DACP) by mixing human costal cartilage with crosslinked hyaluronic acid (HA)-carboxymethyl cellulose (CMC). DACP preserves extracellular matrix components and nanostructures similar to native cartilage, with HA-CMC ensuring shape retention and moldability. Our study demonstrates improved cartilage repair by combining DACP with microfracture, compared to microfracture alone, in rabbit knee defects over 6 months. This is the first report showing better articular cartilage repair using decellularized allogeneic cartilage with microfracture, without the need for exogenous cells or bioactive substances.

In vitro-in vivo wound healing efficacy of Tridax Procumbens extract loaded Carboxymethylcellulose film.

In this work, Tridax Procumbens Extracts (TPE) were blended with Carboxymethylcellulose (CMC), and film was developed through the casting method. The phytochemical screening of the TPE/CMC film was carried out and found the presence of carbohydrates, tannins, saponins, and cardiac glycosides. The presence of elements such as C, O, Na, P, Cl, K, Ca, Mn, and Nb in TP/CMC film was confirmed through EDX. The melting point of the film was found around 291 ± 0.5 °C which was determined through the DSC curve. The maximum tensile strength of the TPE/CMC was found as 14 ± 0.5 MPa. The film showed antibacterial activity against Escherichia coli, Streptococcus pyogenes, Staphylococcus aureus, and Vibrio cholera compared to the control. Cell viability study exhibited 95 % and 98 % cell proliferation for the test film after interacting with the L929 cell line for 18 h and 24 h. The optical contact angle of the TPE/CMC film was also determined. The in-vivo, wound healing studies on adult mice showed healing within 10 days only and the histopathological results revealed the maximum number of fibroblasts with a high density of collagen fibers in the test group indicating that the prepared film can be an effective wound dressing material.