Characteristics of catalytic destruction of dichloromethane and ethyl acetate mixture over HxPO4-RuOx/CeO2 catalyst.

Catalytic destruction is an ascendant technology for the abatement of volatile organic compounds (VOCs) originating from solvent-based industrial processes. The varied composition tends to influence each VOC's catalytic behavior in the reaction mixture. We investigated the catalytic destruction of multi-component VOCs including dichloromethane (DCM) and ethyl acetate (EA), as representatives from pharmaceutical waste gases, over co-supported HxPO4-RuOx/CeO2 catalyst. A mutual inhibitory effect relating to concentrations because of competitive adsorption was verified in the binary VOCs oxidation and EA posed a more negative effect on DCM oxidation owing to EA's superior adsorption capacity. Preferential adsorption of EA on acidic sites (HxPO4/CeO2) promoted DCM activation on basic sites (O2-) and the dominating EA oxidation blocked DCM's access to oxidation centers (RuOx/CeO2), resulting in boosted monochloromethane yield and increased chlorine deposition for DCM oxidation. The impaired redox ability of Ru species owing to chlorine deposition in turn jeopardized deep oxidation of EA and its by-products, leading to increased gaseous by-products such as acetic acid originating from EA pyrolysis. Notably, DCM at low concentration slightly promoted EA conversion at low temperatures with or without water, consistent with the enhanced EA adsorption in co-adsorption analyses. This was mainly due to that DCM impeded the shielding effect of hydrolysate deposition from rapid EA hydrolysis depending on the decreased acidity. Moreover, water benefited EA hydrolysis but decreased CO2 selectivity while the generated water derived from EA was likely to affect DCM transformation. This work may provide theoretical guidance for the promotion of applied catalysts toward industrial applications.

Ti3+/Ti4+ and Co2+/Co3+ redox couples in Ce-doped Co-Ce/TiO2 for enhancing photothermocatalytic toluene oxidation.

Cerium and cobalt loaded Co-Ce/TiO2 catalyst prepared by impregnation method was investigated for photothermal catalytic toluene oxidation. Based on catalyst characterizations (XPS, EPR and H2-TPR), redox cycle between Co and TiO2 (Co2+ + Ti4+ ↔ Co3+ + Ti3+) results in the formation of Co3+, Ti3+ and oxygen vacancies, which play important roles in toluene catalytic oxidation reaction. The introduction of Ce brings in the dual redox cycles (Co2+ + Ti4+ ↔ Co3+ + Ti3+, Co2+ + Ce4+ ↔ Co3+ + Ce3+), further promoting the elevation of reaction sites amount. Under full spectrum irradiation with light intensity of 580 mW/cm2, Co-Ce/TiO2 catalyst achieved 96% of toluene conversion and 73% of CO2 yield, obviously higher than Co/P25 and Co/TiO2. Co-Ce/TiO2 efficiently maintains 10-hour stability test under water vapor conditions and exhibits better photothermal catalytic performance than counterparts under different wavelengths illumination. Photothermal catalytic reaction displays improved activities compared with thermal catalysis, which is attributed to the promotional effect of light including photocatalysis and light activation of reactive oxygen species.

Ce-doped TiO2 supported RuO2 as efficient catalysts for the oxidation of HCl to Cl2.

Reducing the cost of RuO2/TiO2 catalysts is still one of the urgent challenges in catalytic HCl oxidation. In the present work, a Ce-doped TiO2 supported RuO2 catalyst with a low Ru loading was developed, showing a high activity in the catalytic oxidation of HCl to Cl2. The results on some extensive characterizations of both Ce-doped TiO2 carriers and their supported RuO2 catalysts show that the doping of Ce into TiO2 can effectively change the lattice parameters of TiO2 to improve the dispersion of the active RuO2 species on the carrier, which facilitates the production of surface Ru species to expose more active sites for boosting the catalytic performance even under some harsh reaction conditions. This work provides some scientific basis and technical support for chlorine recycling.

Insight into catalytic performance and reaction mechanism for toluene total oxidation over Cu-Ce supported catalyst.

Herein, three supported catalysts, CuO/Al2O3, CeO2/Al2O3, and CuO-CeO2/Al2O3, were synthesized by the convenient impregnation method to reveal the effect of CeO2 addition on catalytic performance and reaction mechanism for toluene oxidation. Compared with CuO/Al2O3, the T50 and T90 (the temperatures at 50% and 90% toluene conversion, respectively) of CuO-CeO2/Al2O3 were reduced by 33 and 39 °C, respectively. N2 adsorption-desorption experiment, XRD, SEM, EDS mapping, Raman, EPR, H2-TPR, O2-TPD, XPS, NH3-TPD, Toluene-TPD, and in-situ DRIFTS were conducted to characterize these catalysts. The excellent catalytic performance of CuO-CeO2/Al2O3 could be attributed to its strong copper-cerium interaction and high oxygen vacancies concentration. Moreover, in-situ DRIFTS proved that CuO-CeO2/Al2O3 promoted the conversion of toluene to benzoate and accelerated the deep degradation path of toluene. This work provided valuable insights into the development of efficient and economical catalysts for volatile organic compounds.

Physicochemical and photocatalytic properties of Ag2CrO4/Fe2O3/CeO2 ternary nanocomposite.

The study presents Ag2CrO4/Fe2O3/CeO2 ternary nanocomposite, based on Fe2O3/CeO2 binary composites, which demonstrated excellent photocatalytic performance in the photodegradation of methylene blue under solar irradiation. The Ag2CrO4/Fe2O3/CeO2 nanocomposites was orthorhombic, ilmenite, and cubic-fluorite phases of Ag2CrO4, Fe2O3, and CeO2, respectively, according to the XRD examination. A strong bond between Ag2CrO4, Fe2O3, and CeO2 within the nanocomposite was demonstrated by the SEM and TEM investigations. Moreover, it was discovered that the coupling of Ag2CrO4 and Fe2O3 caused a red shift and moved CeO2 absorption edge from the UV to the visible spectrum. The reason behind this is that the band gap of CeO2 reduced 2.85 to 2.69 eV and the absorbance band intensity increased in visible region. Utilizing visible light, Ag2CrO4/Fe2O3/CeO2 ternary nanocomposites exhibit enhanced photocatalytic properties (98.90%) for the degradation of methylene blue (MB) within 100 min. The long-term reliability and recyclability of the photocatalyst were explored through 3 successive cycles. An active radical quenching test was conducted to elucidate the involvement of O2 - and OH which are the primary reactive species in the photocatalytic breakdown of MB. Ag2CrO4/Fe2O3/CeO2 ternary nanocomposites displayed notable improvements in photodegradation activity, making them well suited for the effective removal of hazardous dyes present in textile effluents.

Reprogramming the myocardial infarction microenvironment with melanin-based composite nanomedicines in mice.

Myocardial infarction (MI) has a 5-year mortality rate of more than 50% due to the lack of effective treatments. Interactions between cardiomyocytes and the MI microenvironment (MIM) can determine the progression and fate of infarcted myocardial tissue. Here, a specially designed Melanin-based composite nanomedicines (MCN) is developed to effectively treat MI by reprogramming the MIM. MCN is a nanocomposite composed of polydopamine (P), Prussian blue (PB) and cerium oxide (CexOy) with a Mayuan-like structure, which reprogramming the MIM by the efficient conversion of detrimental substances (H+, reactive oxygen species, and hypoxia) into beneficial status (O2 and H2O). In coronary artery ligation and ischemia reperfusion models of male mice, intravenously injecting MCN specifically targets the damaged area, resulting in restoration of cardiac function. With its promising therapeutic effects, MCN constitutes a new agent for MI treatment and demonstrates potential for clinical application.

Electrochemical identification of reductive enantiomers in wood channels: A low-cost and scalable platform for chiral sensing.

Chirality, an inherent characteristic of natural substances (such as sugars, peptides, proteins, and nucleic acid), plays a vital role in human metabolism and exerts substantial impacts. In general, chiral drugs can display diverse pharmacological and pharmacokinetic properties. One enantiomer may exhibit therapeutic effects, while the other could cause adverse reactions. Selective recognition of enantiomers is thus a significant task in the biomolecular and pharmaceutical fields. Despite the development of several chiral identification techniques, low-cost enantioselective sensing methods remain highly desirable. Here, we designed and developed an electrochemical sensing device for reductive enantiomer identification using natural wood channels as the substrate. The wood channels were endowed with oxidase-like activity through the in-situ growth of cerium oxide nanoparticles (CeO2). Chiral recognition capability was further introduced by incorporating a layer of chiral ZIF-8 (L-ZIF) as the chiral selector. To demonstrate the enantioselective sensing performance, 3,4-dihydroxyphenylalanine (DOPA) enantiomers were employed as model analytes. Due to the oxidase-like activity and the confinement effect of the proposed channels, the captured DOPA enantiomers were effectively oxidized to their quinone structure, and the Ce(IV) in CeO2 was reduced to Ce(III). These changes led to alterations in the surface charge of the channels, thereby modulating their ionic transport properties. This sensing mechanism also proved useful for the identification of other reductive enantiomers. The limits of detection for l-DOPA and d-DOPA were determined as 2.41 nM and 1.56 nM, respectively. The resulting wood channel-based sensing device not only can be used for the recognition and detection of reductive enantiomers, but also is expected to be applied to the non-electochemically active substances. Moreover, this study offers a novel type of solid-state channel material with low cost, reproducibility, and easy accessibility for electrochemical chiral sensing.

Electrospun Cerium Oxide Nanoparticle/Aloe Vera Extract-Loaded Nanofibrous Poly(Ethylene Oxide)/Polyurethane Mats As Diabetic Wound Dressings.

Currently the prevalence of diabetic wounds brings a huge encumbrance onto patients, causing high disability and mortality rates and a major medical challenge for society. Therefore, in this study, we are targeting to fabricate aloe vera extract infused biocompatible nanofibrous patches to facilitate the process of diabetic wound healing. Additionally, clindamycin has been adsorbed onto the surface of in-house synthesized ceria nanoparticles and again used separately to design a nanofibrous web, as nanoceria can act as a good drug delivery vehicle and exhibit both antimicrobial and antidiabetic properties. Various physicochemical characteristics such as morphology, porosity, and chemical composition of the produced nanofibrous webs were investigated. Bacterial growth inhibition and antibiofilm studies of the nanofibrous materials confirm its antibacterial and antibiofilm efficacy against Gram-positive and Gram-negative bacteria. An in vitro drug release study confirmed that the nanofibrous mat show a sustained drug release pattern (90% of drug in 96 h). The nanofibrous web containing drug loaded nanoceria not only showed superior in vitro performance but also promoted greater wound contraction (95 ± 2%) in diabetes-induced mice in just 7 days. Consequently, it efficaciously lowers the serum glucose level, inflammatory cytokines, oxidative stress, and hepatotoxicity markers as endorsed by various ex vivo tests. Conclusively, this in-house-fabricated biocompatible nanofibrous patch can act as a potential medicated suppository that can be used for treating diabetic wounds in the proximate future.

Oxygen vacancy-engineered cerium oxide mediated by copper-platinum exhibit enhanced SOD/CAT-mimicking activities to regulate the microenvironment for osteoarthritis therapy.

Cerium oxide (CeO2) nanospheres have limited enzymatic activity that hinders further application in catalytic therapy, but they have an "oxidation switch" to enhance their catalytic activity by increasing oxygen vacancies. In this study, according to the defect-engineering strategy, we developed PtCuOX/CeO2-X nanozymes as highly efficient SOD/CAT mimics by introducing bimetallic copper (Cu) and platinum (Pt) into CeO2 nanospheres to enhance the oxygen vacancies, in an attempt to combine near-infrared (NIR) irradiation to regulate microenvironment for osteoarthritis (OA) therapy. As expected, the Cu and Pt increased the Ce3+/Ce4+ ratio of CeO2 to significantly enhance the oxygen vacancies, and simultaneously CeO2 (111) facilitated the uniform dispersion of Cu and Pt. The strong metal-carrier interaction synergy endowed the PtCuOX/CeO2-X nanozymes with highly efficient SOD/CAT-like activity by the decreased formation energy of oxygen vacancy, promoted electron transfer, the increased adsorption energy of intermediates, and the decreased reaction activation energy. Besides, the nanozymes have excellent photothermal conversion efficiency (55.41%). Further, the PtCuOX/CeO2-X antioxidant system effectively scavenged intracellular ROS and RNS, protected mitochondrial function, and inhibited the inflammatory factors, thus reducing chondrocyte apoptosis. In vivo, experiments demonstrated the biosafety of PtCuOX/CeO2-X and its potent effect on OA suppression. In particular, NIR radiation further enhanced the effects. Mechanistically, PtCuOX/CeO2-X nanozymes reduced ras-related C3 botulinum toxin substrate 1 (Rac-1) and p-p65 protein expression, as well as ROS levels to remodel the inflammatory microenvironment by inhibiting the ROS/Rac-1/nuclear factor kappa-B (NF-κB) signaling pathway. This study introduces new clinical concepts and perspectives that can be applied to inflammatory diseases.

Efficient Electroreduction of Low Nitrate Concentration via Nitrate Self-Enrichment and Active Hydrogen Inducement on the Ce(IV)-Co3O4 Cathode.

Low concentrations of nitrate (NO3-) widely exist in wastewater, post-treated wastewater, and natural environments; its further disposal is a challenge but meaningful for its discharge goals. Electroreduction of NO3- is a promising method that allows to eliminate NO3- and even generate higher-value NH3. However, the massive side reaction of hydrogen evolution has raised great obstacles in the electroreduction of low concentrations of NO3-. Herein, we present an efficient electroreduction method for low or even ultralow concentrations of NO3- via NO3- self-enrichment and active hydrogen (H*) inducement on the Ce(IV)-Co3O4 cathode. The key mechanism is that the strong oxytropism of Ce(IV) in Co3O4 resulted in two changes in structures, including loose nanoporous structures with copious dual adsorption sites of Ce-Co showing strong self-enrichment of NO3- and abundant oxygen vacancies (Ovs) inducing substantial H*. Ultimately, the bifunctional role synergistically promoted the selective conversion of NH3 rather than H2. As a result, Ce(IV)-Co3O4 demonstrated a NO3- self-enrichment with a 4.3-fold up-adsorption, a 7.5-fold enhancement of NH3 Faradic efficiency, and a 93.1% diminution of energy consumption when compared to Co3O4, substantially exceeding other reported electroreduction cathodes for NO3- concentrations lower than 100 mg·L-1. This work provides an effective treatment method for low or even ultralow concentrations of NO3-.

Oral enzyme-responsive nanoprobes for targeted theranostics of inflammatory bowel disease.

BACKGROUND: Inflammatory bowel disease (IBD) is a progressive and debilitating inflammatory disease of the gastrointestinal tract (GIT). Despite recent advances, precise treatment and noninvasive monitoring remain challenging. METHODS: Herein, we developed orally-administered, colitis-targeting and hyaluronic acid (HA)-modified, core-shell curcumin (Cur)- and cerium oxide (CeO2)-loaded nanoprobes (Cur@PC-HA/CeO2 NPs) for computed tomography (CT) imaging-guided treatment and monitoring of IBD in living mice. RESULTS: Following oral administration, high-molecular-weight HA maintains integrity with little absorption in the upper GIT, and then actively accumulates at local colitis sites owing to its colitis-targeting ability, leading to specific CT enhancement lasting for 24 h. The retained NPs are further degraded by hyaluronidase in the colon to release Cur and CeO2, thereby exerting anti-inflammatory and antioxidant effects. Combined with the ability of NPs to regulate intestinal flora, the oral NPs result in substantial relief in symptoms. Following multiple treatments, the gradually decreasing range of the colon with high CT attenuation correlates with the change in the clinical biomarkers, indicating the feasibility of treatment response and remission. CONCLUSION: This study provides a proof-of-concept for the design of a novel theranostic integration strategy for concomitant IBD treatment and the real-time monitoring of treatment responses.

Molecularly imprinted polymer-based electrochemical sensor for rapid detection of masked deoxynivalenol with Mn-doped CeO2 nanozyme as signal amplifier.

Deoxynivalenol-3-glucoside (D3G), the masked form of the important mycotoxin deoxynivalenol (DON), displays potential toxicity but is difficult to control owing to the lack of rapid detection methods. Herein, an innovative molecularly imprinted polymer (MIP)-based electrochemical sensor was developed for the rapid detection of D3G. MIP, an efficient recognition element for D3G, was electropolymerized using o-phenylenediamine based on a surface functional monomer-directing strategy for the first time. CeO2, which contains both Ce3+ and Ce4+ oxidation states, was introduced as a nanozyme to catalyze H2O2 reduction, while Mn doping generated more oxygen vacancies and considerably improved the catalytic activity. Mn-CeO2 also served as a promising substrate material because of its large surface area and excellent conductivity. Under optimal conditions, a good linear relationship was observed for D3G detection over the concentration range of 0.01-50 ng/mL. The proposed sensor could detect D3G down to 0.003 ng/mL with excellent selectivity, even distinguishing its precursor DON in complex samples. The sensor exhibited acceptable stability with high reproducibility and accuracy, and could successfully determine D3G in grain samples. To the best of our knowledge, this is the first electrochemical sensing platform for rapid D3G detection that can easily be expanded to other masked mycotoxins.

Nanozyme-based colorimetric sensor arrays coupling with smartphone for discrimination and "segmentation-extraction-regression" deep learning assisted quantification of flavonoids.

Achieving rapid, cost effective, and intelligent identification and quantification of flavonoids is challenging. For fast and uncomplicated flavonoid determination, a sensing platform of smartphone-coupled colorimetric sensor arrays (electronic noses) was developed, relying on the differential competitive inhibition of hesperidin, nobiletin, and tangeretin on the oxidation reactions of nanozymes with a 3,3',5,5'-tetramethylbenzidine substrate. First, density functional theory calculations predicted the enhanced peroxidase-like activities of CeO2 nanozymes after doping with Mn, Co, and Fe, which was then confirmed by experiments. The self-designed mobile application, Quick Viewer, enabled a rapid evaluation of the red, green, and blue values of colorimetric images using a multi-hole parallel acquisition strategy. The sensor array based on three channels of CeMn, CeFe, and CeCo was able to discriminate between different flavonoids from various categories, concentrations, mixtures, and the various storage durations of flavonoid-rich Citri Reticulatae Pericarpium through a linear discriminant analysis. Furthermore, the integration of a "segmentation-extraction-regression" deep learning algorithm enabled single-hole images to be obtained by segmenting from a 3 × 4 sensing array to augment the featured information of array images. The MobileNetV3-small neural network was trained on 37,488 single-well images and achieved an excellent predictive capability for flavonoid concentrations (R2 = 0.97). Finally, MobileNetV3-small was integrated into a smartphone as an application (Intelligent Analysis Master), to achieve the one-click output of three concentrations. This study developed an innovative approach for the qualitative and simultaneous multi-ingredient quantitative analysis of flavonoids.

Antibacterial properties of mesoporous silica coated with cerium oxide nanoparticles in dental resin composite.

Cerium oxide nanoparticles are known for their antibacterial effects resulting from Ce3+ to Ce4+ conversion. Application of such cerium oxide nanoparticles in dentistry has been previously considered but limited due to deterioration of mechanical properties. Hence, this study aimed to examine mesoporous silica (MCM-41) coated with cerium oxide nanoparticles and evaluate the antibacterial effects and mechanical properties when applied to dental composite resin. Cerium oxide nanoparticles were coated on the MCM-41 surface using the sol-gel method by adding cerium oxide nanoparticle precursor to the MCM-41 dispersion. The samples were tested for antibacterial activity against Streptococcus mutans via CFU and MTT assays. The mechanical properties were assessed by flexural strength and depth of cure according to ISO 4049. Data were analyzed using a t-test, one-way ANOVA, and Tukey's post-hoc test (p = 0.05). The experimental group showed significantly increased antibacterial properties compared to the control groups (p < 0.005). The flexural strength exhibited a decreasing trend as the amount of cerium oxide nanoparticle-coated MCM-41 increased. However, the flexural strength and depth of cure values of the silane group met the ISO 4049 standard. Antibacterial properties increased with increasing amounts of cerium oxide nanoparticles. Although the mechanical properties decreased, silane treatment overcame this drawback. Hence, the cerium oxide nanoparticles coated on MCM-41 may be used for dental resin composite.

Au-modified ceria nanozyme prevents and treats hypoxia-induced pulmonary hypertension with greatly improved enzymatic activity and safety.

BACKGROUND: Despite recent advances the prognosis of pulmonary hypertension remains poor and warrants novel therapeutic options. Extensive studies, including ours, have revealed that hypoxia-induced pulmonary hypertension is associated with high oxidative stress. Cerium oxide nanozyme or nanoparticles (CeNPs) have displayed catalytic activity mimicking both catalase and superoxide dismutase functions and have been widely used as an anti-oxidative stress approach. However, whether CeNPs can attenuate hypoxia-induced pulmonary vascular oxidative stress and pulmonary hypertension is unknown. RESULTS: In this study, we designed a new ceria nanozyme or nanoparticle (AuCeNPs) exhibiting enhanced enzyme activity. The AuCeNPs significantly blunted the increase of reactive oxygen species and intracellular calcium concentration while limiting proliferation of pulmonary artery smooth muscle cells and pulmonary vasoconstriction in a model of hypoxia-induced pulmonary hypertension. In addition, the inhalation of nebulized AuCeNPs, but not CeNPs, not only prevented but also blunted hypoxia-induced pulmonary hypertension in rats. The benefits of AuCeNPs were associated with limited increase of intracellular calcium concentration as well as enhancement of extracellular calcium-sensing receptor (CaSR) activity and expression in rat pulmonary artery smooth muscle cells. Nebulised AuCeNPs showed a favorable safety profile, systemic arterial pressure, liver and kidney function, plasma Ca2+ level, and blood biochemical parameters were not affected. CONCLUSION: We conclude that AuCeNPs is an improved reactive oxygen species scavenger that effectively prevents and treats hypoxia-induced pulmonary hypertension.

A Nanozyme-Boosted MOF-CRISPR Platform for Treatment of Alzheimer's Disease.

Rectifying the aberrant microenvironment of a disease through maintenance of redox homeostasis has emerged as a promising perspective with significant therapeutic potential for Alzheimer's disease (AD). Herein, we design and construct a novel nanozyme-boosted MOF-CRISPR platform (CMOPKP), which can maintain redox homeostasis and rescue the impaired microenvironment of AD. By modifying the targeted peptides KLVFFAED, CMOPKP can traverse the blood-brain barrier and deliver the CRISPR activation system for precise activation of the Nrf2 signaling pathway and downstream redox proteins in regions characterized by oxidative stress, thereby reinstating neuronal antioxidant capacity and preserving redox homeostasis. Furthermore, cerium dioxide possessing catalase enzyme-like activity can synergistically alleviate oxidative stress. Further in vivo studies demonstrate that CMOPKP can effectively alleviate cognitive impairment in 3xTg-AD mouse models. Therefore, our design presents an effective way for regulating redox homeostasis in AD, which shows promise as a therapeutic strategy for mitigating oxidative stress in AD.

Synthesis and characterization of cerium doped NiZn nano ferrites as substrate material for multi band MIMO antenna.

In addressing issues related to electromagnetic interference, the demand for ferrite materials with exceptional magnetic and dielectric properties has escalated recently. In this research, sol-gel auto combustion technique prepared Nickel zinc ferrites substituted with cerium, denoted as Ni0.5Zn0.5Ce0.02Fe1.98O4.X-ray diffraction (XRD), Vibrating Sample Magnetometer (VSM), and Field Emissions Scanning Electron Microscope (FESEM) were used to investigate the structure, magnetic properties, and morphology of Cerium doped NiZn Nano ferrites, respectively. The magnetic and dielectric properties of the sample was examined within a frequency range of 2.5-5.5 GHz. Sample exhibits low permittivity (2.2), high permeability (1.4), low dielectric (0.35) and magnetic loss tangent (-0.5) and highest saturation magnetization measuring 30.28 emu/g. A Novel Double-band, 4x4 MIMO window grill-modeled antennas operating on 3.5 GHz and 4.8 GHz frequency bands for 5G smartphones is designed using the CST microwave studio suite. The performance of window grilled 4x4 MIMO antenna model with Cerium doped NiZn nano ferrites as substrate, is investigated and found the return loss of -35 and -32 dB, with the bandwidth of 200MHz, gain (1.89 & 4.38dBi), envelope correlation coefficient (0.00185), channel capacity loss (0.2bps/Hz), and interterminal isolation of (22& 19dB).The results show that the antenna size is reduced with improved bandwidth, higher isolation and better diversity gain performance using Cerium doped NiZn nano ferrite substrate compared to conventional dielectric substrates.

Influence of 60Co gamma radiation on the structural, morphological and optical properties of hydrothermally synthesized MoO3-CeO2 nanocomposite.

The influence of 60Co gamma radiation on Molybdenum Oxide-Cerium Oxide (MoO3-CeO2) nanocomposite is investigated in the present study. The MoO3-CeO2 nanocomposite was synthesized by conventional hydrothermal route. Ammonium hepta molybdate tetrahydrate [(NH4)6Mo7O24.4H2O] and cerium nitrate [Ce (NO3)3.4H2O] were used as the precursors. The composite was subjected to high energy gamma irradiation for different doses of 50, 100 and 150 kGy using 60Co gamma irradiation chamber. The structural study was carried out using X-ray diffraction, the morphological studies were carried out using scanning electron microscopy and ultraviolet-visible spectroscopy was carried out to study the optical properties before and after irradiation. The crystallite size was found to increase with increasing doses of gamma irradiation. The morphology of the samples shows that the nanoparticles tend to agglomerate with increasing doses of gamma radiation. The energy bandgap of the MoO3-CeO2 nanocomposite was calculated before and after irradiation and found to decrease with increasing doses of irradiation upto 100 kGy and then increases for 150 kGy.

Latent fingerprint imaging using irradiated novel mixed metal oxides (MXOY, M = Ba, Zn, Al, Ce) nanophosphor.

Latent fingerprint developed at the site of crime is considered as crucial physical evidence in forensic investigation. The mixed metal oxides (MXOY, M = Ba, Zn, Al, Ce) nanophosphor was synthesised by irradiating the precursor solution with 60Co gamma radiation followed by solution combustion method. The structural, morphological, optical characteristics and fingerprint imaging were studied using X-ray diffraction (XRD), scanning electron microscopy, UV-visible spectroscopy and powder dusting method, respectively. The XRD results revealed that the average crystallite size is found to be 30 nm with the estimated bandgap of 3.18 eV. The broadband UV exited luminescence of the phosphors was observed at λMax = 330 nm. The PL spectrum shows three emission bands at 432, 444 and 460 nm that corresponds to blue regions, suggesting that the synthesised nanophosphor is a potential luminous material for latent fingerprinting and luminescent devices.

Robust Ru/Ce@Co Catalyst with an Optimized Support Structure for Propane Oxidation.

Short carbon chain alkanes, as typical volatile organic compounds (VOCs), have molecular structural stability and low molecular polarity, leading to an enormous challenge in the catalytic oxidation of propane. Although Ru-based catalysts exhibit a surprisingly high activity for the catalytic oxidation of propane to CO2 and H2O, active RuOx species are partially oxidized and sintered during the oxidation reaction, leading to a decrease in catalytic activity and significantly inhibiting their application in industrial processes. Herein, the Ru/Ce@Co catalyst is synthesized with a specific structure, in which cerium dioxide is dispersed in a thin layer on the surface of Co3O4, and Ru nanoparticles fall preferentially on cerium oxide with high dispersity. Compared with the Ru/CeO2 and Ru/Co3O4 catalysts, the Ru/Ce@Co catalyst demonstrates excellent catalytic activity and stability for the oxidation of propane, even under severe operating conditions, such as recycling reaction, high space velocity, a certain degree of moisture, and high temperature. Benefiting from this particular structure, the Ru/Ce@Co (5:95) catalyst with more Ce3+ species leads to the Ru species being anchored more firmly on the CeO2 surface with a low-valent state and has a strong potential for adsorption and activation of propane and oxygen, which is beneficial for RuOx species with high activity and stability. This work provides a novel strategy for designing high-efficiency Ru-based catalysts for the catalytic combustion of short carbon alkanes.