A sensitive sandwich-type electrochemical aptasensing platform based on Ti3C2Tx/MoS2/MWCNT@rGONR composites for simultaneous detection of kanamycin and chloramphenicol in food samples.

A Ti3C2Tx/MoS2/MWCNT@rGONR nanocomposite was prepared for the first time for building a sensitive electrochemical aptasening platform to simultaneously detect kanamycin (Kana) and chloramphenicol (Cap). Owing to their accordion-like structure, rich surface groups, and high charge mobility, Ti3C2Tx/MoS2/MWCNT@rGONR composites provided a spacious covalent immobilization surface and a better electrochemical aptasensing platform. The aptamers of Kana and Cap used in sensors enhance the selectivity. Furthermore, TiP, an ion exchanger, was used for loading more different metal ions functioning as labels to form a sandwich-type sensor together with Ti3C2Tx/MoS2/MWCNT@rGONR, improving the electrochemical sensitivity and obtaining a highly distinguishable signal readout. Under the optimized conditions, the sensor has good detection limits of 0.135 nmol L-1 and 0.173 nmol L-1 for Kana and Cap, respectively, at the same linearity concentration of 0.5-2500 nmol L-1. Finally, it was successfully applied for detection in milk and fish meat, and the results were compared with the standard method HPLC, indicating its great potential for food safety monitoring.

Nanoscale zero-valent iron reverses resistance of Pseudomonas aeruginosa to chloramphenicol.

Zero-valent iron (ZVI) has been extensively studied for its capacity to remove various contaminants in the environments. However, whether ZVI affects bacterial resistance to antibiotics has not been fully explored. Herein, it was unexpected that, compared with microscale ZVI (mZVI), nanoscale ZVI (nZVI) facilitated the susceptibility of Pseudomonas aeruginosa (P. aeruginosa) to chloramphenicol (CAP), with a decrease in the minimal inhibitory concentration (MIC) of about 60 %, demonstrating a nanosize-specific effect. nZVI enhanced CAP accumulation in P. aeruginosa via inhibitory effect on efflux pumps activated by MexT, thus conferring the susceptibility of P. aeruginosa to CAP. Circular dichroism spectroscopy revealed that the structure of MexT was changed during the evolution. More importantly, molecular dynamic simulations uncovered that, once the structure of MexT changed, it would be more likely to interact with nZVI, resulting in more serious changes in its secondary structure, which was consistent with the increasing susceptibility of P. aeruginosa to CAP. Collectively, this study elucidated the size-specific effect and the underlying mechanism of ZVI on the bacterial evolution of susceptibility toward antibiotics, highlighting the potentials of nZVI-based technologies on the prevention of bacterial resistance to antibiotics, one of the most important issue for globally public health.

Synergistic effect on simultaneous treatment of Cr(VI) and chloramphenicol using a non-thermal plasma technology.

Toxic organic and heavy metal contaminants commonly exist in industrial waste stream(s) and treatment is of great challenge. In this study, a dielectric barrier discharge (DBD) non-thermal plasma technology was employed for the simultaneous treatment of two important contaminants, chloramphenicol (CAP) and Cr(VI) in an aqueous solution through redox transformations. More than 70% of CAP and 20% of TOC were degraded in 60 min, while Cr(VI) was completely removed in 10 min. The hydroxyl radicals were the main active species for the degradation. Meanwhile, the consumption of hydroxyl radicals was beneficial to the reduction of Cr(VI). The synergistic effect was investigated between CAP degradation and Cr(VI) reduction. The reduction of Cr(VI) would be enhanced in the presence of CAP with a low concentration and could be inhibited under a high concentration, because part of hydroxyl radicals could be consumed by the low-concentration CAP and the obtained intermediates with a higher kinetic rate. However, CAP with a high concentration could react with such reductive species as eaq- and •H, which could compete with Cr(VI) and inhibit the reduction. In addition, the presence of Cr(VI) enhanced the degradation and mineralization of CAP; the study of obtained intermediates indicated that the presence of Cr(VI) changed the degradation path of CAP as Cr(VI) would react with reductive species, enhance the generation of hydroxyl radicals, and cause more hydroxylation reactions. Moreover, the mechanism for the simultaneous redox transformations of CAP and Cr(VI) was illustrated. This study indicates that the DBD non-thermal plasma technology can be one of better solutions for simultaneous elimination of heavy metal and organic contaminants in aquatic environments.

Sensitive fluorescence assay of chloramphenicol coupled with two-level isothermal amplification using a self-powered catalyzed hairpin assembly and entropy-driven circuit.

Two levels of nucleic acids-based isothermal amplification normally require a long reaction time due to the low concentration of catalyst, which limits its practical application. A sensitive fluorescence assay of chloramphenicol (CAP) was developed coupled with two-level isothermal amplification using a self-powered catalyzed hairpin assembly (CHA) and entropy-driven circuit (EDC). CAP can bind with its aptamer to open its closed structure. The opened hairpin can initiate self-powered CHA and EDC. The product of CHA can circularly catalyze the CHA with increasing concentration. In principle, the product of CHA plays the role of catalyst and increases with the progression of the reaction. Compared with the normal two levels of amplification, the amplification efficiency of our strategy is much higher due to the self-powered reaction by the CHA product. Thus, the reaction time is shortened to 110 min in this strategy. Moreover, the detection limit for CAP can achieve 0.1 pM and shows promising prospects for practical application.

Beetle-inspired AuNPs semi-embedded colloidal crystal chips for the highly sensitive and colored detection of chloramphenicol in foods.

Inspired by the desert beetle, a novel biomimetic chip was developed to detect chloramphenicol (CP). The chip was characterized by a periodic array in which hydrophobic Au nanoparticles (AuNPs) were semi-embedded on hydrophilic polymethyl methacrylate (PMMA) spheres. Among them, the AuNPs exhibited both a localized surface plasmon resonance effect to amplify the reflected signal and a synergistic effect with PMMA spheres to create a significant hydrophilic-hydrophobic interface, which facilitated the enrichment of target CP molecules and improved sensitivity. After optimization, the chip showed direct, ultrasensitive (as low as 0.2 ng/mL), fast (5 min), and selective detection of CP with a wide concentration range extending from 0.2 ng/mL to 1000 ng/mL. During detection, color changes of the chip were observed by naked eyes without any color display equipment. The recovery of CP was between 94.65 % and 108.70 % in chicken and milk samples.

Design, optimization and pharmaceutical characterization of wound healing film dressings with chloramphenicol and ibuprofen.

OBJECTIVE: The aim of the present study was to develop and optimize a wound dressing film loaded with chloramphenicol (CAM) and ibuprofen (IBU) using a Quality by Design (QbD) approach. SIGNIFICANCE: The two drugs have been combined in the same dressing as they address two critical aspects of the wound healing process, namely prevention of bacterial infection and reduction of inflammation and pain related to injury. METHODS: Three critical formulation variables were identified, namely the ratios of Kollicoat SR 30D, polyethylene glycol 400 and polyvinyl alcohol. These variables were further considered as factors of an experimental design, and 17 formulations loaded with CAM and IBU were prepared via solvent casting. The films were characterized in terms of dimensions, mechanical properties and bioadhesion. Additionally, the optimal formulation was characterized regarding tensile properties, swelling behavior, water vapor transmission rate, surface morphology, thermal behavior, goniometry, in vitro drug release, cell viability, and antibacterial activity. RESULTS: The film was optimized by setting minimal values for the folding endurance, adhesive force and hardness. The optimally formulated film showed good fluid handling properties in terms of swelling behavior and water vapor transmission rate. IBU and CAM were released from the film up to 80.9% and 82.5% for 8 h. The film was nontoxic, and the antibacterial activity was prominent against Micrococcus spp. and Streptococcus pyogenes. CONCLUSIONS: The QbD approach was successfully implemented to develop and optimize a novel film dressing promising for the treatment of low-exuding acute wounds prone to infection and inflammation.

Antimicrobial liposomes-in-nanofiber wound dressings prepared by a green and sustainable wire-electrospinning set-up.

Increasing prevalence of infected and chronic wounds demands improved therapy options. In this work an electrospun nanofiber dressing with liposomes is suggested, focusing on the dressing's ability to support tissue regeneration and infection control. Chloramphenicol (CAM) was the chosen antibiotic, added to the nanofibers after first embedded in liposomes to maintain a sustained drug release. Nanofibers spun from five different polymer blends were tested, where pectin and polyethylene oxide (PEO) was identified as the most promising polymer blend, showing superior fiber formation and tensile strength. The wire-electrospinning setup (WES) was selected for its pilot-scale features, and water was applied as the only solvent for green electrospinning and to allow direct liposome incorporation. CAM-liposomes were added to Pectin-PEO nanofibers in the next step. Confocal imaging of rhodamine-labelled liposomes indicated intact liposomes in the fibers after electrospinning. This was supported by the observed in vitroCAM-release, showing that Pectin-PEO-nanofibers with CAM-liposomes had a delayed drug release compared to controls. Biological testing confirmed the antimicrobial efficacy of CAM and good biocompatibility of all CAM-nanofibers. The successful fiber formation and green production process with WES gives a promising outlook for industrial upscaling.

Rational Truncation of Aptamer for Ultrasensitive Aptasensing of Chloramphenicol: Studies Using Bio-Layer Interferometry.

Aptamers are an excellent choice for the selective detection of small molecules. However, the previously reported aptamer for chloramphenicol suffers from low affinity, probably as a result of steric hindrance due to its bulky nature (80 nucleotides) leading to lower sensitivity in analytical assays. The present work was aimed at improving this binding affinity by truncating the aptamer without compromising its stability and three-dimensional folding. Shorter aptamer sequences were designed by systematically removing bases from each or both ends of the original aptamer. Thermodynamic factors were evaluated computationally to provide insight into the stability and folding patterns of the modified aptamers. Binding affinities were evaluated using bio-layer interferometry. Among the eleven sequences generated, one aptamer was selected based on its low dissociation constant, length, and regression of model fitting with association and dissociation curves. The dissociation constant could be lowered by 86.93% by truncating 30 bases from the 3' end of the previously reported aptamer. The selected aptamer was used for the detection of chloramphenicol in honey samples, based on a visible color change upon the aggregation of gold nanospheres caused by aptamer desorption. The detection limit could be reduced 32.87 times (1.673 pg mL-1) using the modified length aptamer, indicating its improved affinity as well as its suitability in real-sample analysis for the ultrasensitive detection of chloramphenicol.

Fluorescent aptasensor for the ultrasensitive detection of antibiotic residue in food samples based on dumbbell DNA-mediated signal amplification.

Sensitive and reliable detection of antibiotics is of great significance for environmental and food safety due to its high risk in trace concentrations. Herein, we developed a fluorescence sensing system for chloramphenicol (CAP) detection based on dumbbell DNA-mediated signal amplification. Two hairpin dimers (2H1 and 2H2) were employed as the building blocks to construct the sensing scaffolds. The CAP-aptamer binding in another hairpin H0 can liberate the trigger DNA, which then activates the cyclic assembly reaction between 2H1 and 2H2. The separation of FAM and BHQ in the formed product of cascaded DNA ladder yields a high fluorescence signal for CAP monitoring. Compared with the monomer hairpin assembly between H1 and H2, the dimer hairpin assembly between 2H1 and 2H2 exhibits enhanced signal amplification efficiency and reduced reaction time. The developed CAP sensor showed a wide linear range from 10 fM to 10 nM with a detection limit of 2 fM. Importantly, this sensing platform has been successfully applied to the determination of CAP in fish, milk, and water samples with satisfactory recovery and accuracy. With the advantages of high sensitivity, mix-and-read pattern, and robustness, our proposed CAP sensor can be used as a simple and routine tool for the detection of trace amounts of antibiotic residues.

Enhanced reductive degradation of chloramphenicol by sulfidated microscale zero-valent iron: Sulfur-induced mechanism, competitive kinetics, and new transformation pathway.

Crystalline iron sulfide (FeSx, i.e., FeS or FeS2) minerals as sulfur sources were used to prepare the mechanochemically sulfidated microscale zero-valent iron ((FeSx+ZVI)bm). Metastable FeS and FeS2 precursors were generated via aqueous coprecipitation and applied to fabricate FeSx@ZVI samples. (FeSx+ZVI)bm and FeSx@ZVI exhibited better chloramphenicol (CAP) degradation than ZVI due to the increase in specific surface areas, the decrease of electrochemical impedance, the formation of galvanic cells, and sulfur-induced pitting and local acidity. (FeSx+ZVI)bm had better CAP removal capacity than FeSx@ZVI under different S/Fe molar ratios, initial pH, and oxygen conditions. At the same time, FeSx@ZVI showed better electron utilization under oxic conditions, related to their Fe0 and sulfur spatial distribution. Nitro reduction and dechlorination of CAP by (FeSx+ZVI)bm produced nitroso, azoxy, amine, and monodechlorination products, while dechlorination was not involved in the degradation process of CAP by FeSx@ZVI. A new transformation pathway of nitroso-CAP to amine-CAP mediated by azoxy products is proposed via coupling a chain decay multispecies model and DFT calculations. The larger competitive reaction rates among O2, CAP, and its degradation products was determined by their lower LUMO energy. The contribution of direct electron transfer to nitro reduction was greater than that of atomic hydrogen, but the opposite was true for dechlorination. FeSx@ZVI had a larger DET contribution than (FeSx+ZVI)bm, and FeS2 promoted the DET contribution better than FeS. Toxicity assessment indicated that the rapid transformation of nitroso and azoxy products was crucial for eliminating the biotoxicity of CAP.

Triple-Helix Molecular Switch Triggered Cleavage Effect of DNAzyme for Ultrasensitive Electrochemical Detection of Chloramphenicol.

The abuse of chloramphenicol (CAP) in animal-derived products leads to serious food safety problems, so the sensitive and accurate determination of CAP residues has great noteworthiness for public health. Herein, we present a novel electrochemical aptasensor that incorporates a poly(diallyldimethylammonium chloride) functionalized graphene/Ag@Au nanosheets (PDDA-Gr/Ag@Au NSs) composite modified electrode and a DNAzyme signal amplification effect triggered by a triple-helix molecular switch (THMS) for detecting CAP. The PDDA-Gr/Ag@Au NSs composite has the advantages of high surface area, great conductivity, and dispersibility and has successfully improved the electrochemical performance of the electrode. Specific interaction with CAP will cause the signal transduction probe (STP) to be released from the THMS. After that, the DNAzyme will be activated with the help of Pb2+ and remove the immobilized signal probe on the electrode surface. The signal change was recorded by square wave voltammetry (SWV) and led to an accurate quantification of CAP. With all these features, the proposed sensing strategy yielded a satisfactory analytical performance with linearity between 1 pM and 1 µM and a limit of detection of 18.6 fM. Furthermore, the aptasensor shows excellent specificity for CAP in the presence of other antibiotics and resists interference with other common metal ions. Importantly, the performance is not diminished when the constructed aptasensor is applied to measuring CAP in milk powder. This THMS-based method is easy to design, and alteration to different targets can be achieved by simply replacing the aptamer sequence in the THMS. Therefore, this method shows significant prospects as a flexible platform for accurate monitoring of antibiotic residues in foodstuffs.

Structural basis for the context-specific action of the classic peptidyl transferase inhibitor chloramphenicol.

Ribosome-targeting antibiotics serve as powerful antimicrobials and as tools for studying the ribosome, the catalytic peptidyl transferase center (PTC) of which is targeted by many drugs. The classic PTC-acting antibiotic chloramphenicol (CHL) and the newest clinically significant linezolid (LZD) were considered indiscriminate inhibitors of protein synthesis that cause ribosome stalling at every codon of every gene being translated. However, recent discoveries have shown that CHL and LZD preferentially arrest translation when the ribosome needs to polymerize particular amino acid sequences. The molecular mechanisms that underlie the context-specific action of ribosome inhibitors are unknown. Here we present high-resolution structures of ribosomal complexes, with or without CHL, carrying specific nascent peptides that support or negate the drug action. Our data suggest that the penultimate residue of the nascent peptide directly modulates antibiotic affinity to the ribosome by either establishing specific interactions with the drug or by obstructing its proper placement in the binding site.

Green preparation of porous hierarchical TiO2(B)/anatase phase junction for effective photocatalytic degradation of antibiotics.

In this study, porous hierarchical bronze/anatase phase junction TiO2 assembled by ultrathin two-dimensional nanosheets was prepared by a novel, green and simple deep eutectic solvent-regulated strategy. Due to its structural features, the TiO2 sample exhibited enhanced photocatalytic activities for multiple kinds of antibiotics, including ofloxacin, ciprofloxacin and chloramphenicol.

Dual genetic selection of the theophylline riboswitch with altered aptamer specificity for caffeine.

The aptamer domain of the theophylline riboswitch was randomized to generate a library containing millions of different variants. Dual genetic selection utilizing the cat-upp fusion gene was performed for the library, which successfully led to the identification of a caffeine-specific synthetic riboswitch. When a chloramphenicol-resistance gene was expressed under control of this riboswitch, E. coli cells showed chloramphenicol resistance only in the presence of caffeine. When inserted upstream of the gfpuv or lacZ gene, the caffeine riboswitch induced the expression of green fluorescent protein or ß-galactosidase in the presence of caffeine, respectively. When tested with various concentrations of caffeine, the ß-galactosidase activity was proportional to the amount of caffeine, clearly indicating the caffeine-dependent gene regulation by the caffeine riboswitch.

The in situ formation of a hole-transporting material on bismuth tungstate for innovative photoelectrochemical aptasensing.

We present the in situ formation of a hole-transporting material (bismuth hexacyanoferrate) on the surface of bismuth tungstate aimed at an innovative photoelectrochemical strategy. This approach enabled a competent aptasensing platform for chloramphenicol that was amenable to homogenous, label-free, and split-mode detection.

Stimuli-Responsive Metal-Organic Framework on a Metal-Organic Framework Heterostructure for Efficient Antibiotic Detection and Anticounterfeiting.

Stimuli-responsiveness is an important characteristic that show promising potential in various applications. Herein, a novel ZIF-8-on-Tb-dpn (H3dpn = 5-(2',4'-dicarboxylphenyl)nicotic acid) heterostructure is constructed using a heteroepitaxial strategy combining the chemical-responsive (antibiotics) and light-responsive behaviors. The pyridine nitrogen of Tb-dpn acts as an anchor site for Zn2+, which helps to overcome the limit of lattice mismatch between two metal-organic frameworks (MOFs) and promotes the growth of ZIF-8 nanocrystals. Based on the synergy effect of two MOFs, ZIF-8-on-Tb-dpn exhibits an efficient turn-off response toward tetracycline and chloramphenicol via competitive absorption, Förster resonance energy transfer, and photoinduced electron transfer processes with limit of detection values of 5.6 and 37.6 nM, respectively, which are three- to -fivefold lower than those of Tb-dpn. Moreover, the nanocage of ZIF-8 is utilized to encapsulate photochromic spiropyran (SP) molecules and realize the reversible conversion between SP and merocyanine (MC) under visible light and ultraviolet light. The MC form is accompanied with strong adsorption at 555 nm, which can erase the emission of Tb3+. Therefore, a reversible invisible anticounterfeiting pattern is designed with SP ⊂ ZIF-8-on-Tb-dpn for information anticounterfeiting. The excellent stimuli-responsive ability makes the luminescent platform a potential candidate in luminescence applications.

Synthesis and biological evaluation of a novel anticancer agent CBISC that induces DNA damage response and diminishes levels of mutant-p53.

A novel nitrogen mustard CBISC has been synthesized and evaluated as an anticancer agent. CBISC has been shown to exhibit enhanced cell proliferation inhibition properties against mutant p53 cell lines colorectal cancer WiDr, pancreatic cancer (MIAPaCa-2 and PANC-1), and triple negative breast cancer (MDA-MB-231 and MDA-MB-468). In vitro mechanism of action studies revealed perturbations in the p53 pathway and increased cell death as evidenced by western blotting, immunofluorescent microscopy and MTT assay. Further, in vivo studies revealed that CBISC is well tolerated in healthy mice and exhibited significant in vivo tumor growth inhibition properties in WiDr and MIAPaCa-2 xenograft models. These studies illustrate the potential utility of CBISC as an anticancer agent.

Multiplexed complexome profiling using tandem mass tags.

Complexome profiling is a rapidly spreading, powerful technique to gain insight into the nature of protein complexes. It identifies and quantifies protein complexes separated into multiple fractions of increasing molecular mass using mass spectrometry-based, label-free bottom-up proteomics. Complexome profiling enables a sophisticated and thorough characterization of the composition, molecular mass, assembly, and interactions of protein complexes. However, in practice, its application is limited by the large number of samples it generates and the related time of mass spectrometry analyses. Here, we report an improved process workflow that implements tandem mass tags for multiplexing complexome profiling. This workflow substantially reduces the number of samples and measuring time without compromising protein identification or quantification reliability. In profiles from mitochondrial fractions of cells recovering from chloramphenicol treatment, tandem mass tags-multiplexed complexome profiling exhibited migration patterns of mature ATP synthase (complex V) and assembly intermediates that were consistent in composition and abundance with profiles obtained by the label-free approach. Reporter ion quantifications of proteins and complexes unaffected by the chloramphenicol treatment presented less variation in comparison to the label-free method. Incorporation of tandem mass tags enabled an efficient and robust complexome profiling analysis and may foster broader application for protein complex profiling in biomedical research and diagnostics.