Green-synthesized CuO and ZnO nanoparticles derived from Calotropis gigantea (Apple of Sodom): enhancing plant growth, efficient dye removal, and potent antibacterial applications.

Nanoparticles, owing to their unique physicochemical properties, have garnered significant attention in various scientific disciplines, including materials science, chemistry, biology, and environmental engineering. In recent years, the synthesis of metal oxide nanoparticles, such as NiO, Fe2O3, ZnO, SnO2, and CuO via green routes, has gained attraction due to their diverse applications in fields ranging from catalysis and electronics to medicine and environmental remediation. This study focuses on the green synthesis of copper oxide (CuO) and zinc oxide (ZnO) nanoparticles using Calotropis gigantea (Apple of Sodom) leaf extract as a reducing agent and stabilizer, with zinc nitrate (ZnNO3.6H2O) and copper nitrate (CuNO3.3H2O) as precursors. The hexagonal phase of ZnO and monoclinic plan structure of CuO with high crystallinity was confirmed by XRD and elemental composition by EDX analysis. With the help of an SEM image, particle size measured for CuO and ZnO using ImageJ software was found to be 56.08 nm and 46.49 nm, respectively. This study investigates the efficacy of nanoparticles in wastewater treatment, particularly focusing on methylene blue dye decolorization using the statistical processing of response surface methodology (RSM) using the Box-Behnken method. Additionally, it explores the impact of synthesized nanoparticles on seed growth enhancement, using Vigna radiata (green gram) seeds immersed in various doses of nanoparticles (0, 0.5, 1, 1.5, 2 mg/30 mL). Furthermore, the antibacterial activity of the nanoparticles against both gram-positive and gram-negative bacteria is evaluated. The results confirm the effectiveness of the materials for methylene blue dye removal, achieving 80.53% with CuO and 78.25% with ZnO. Significant seed growth was observed with a low nanoparticle dosage of 1.5 mg/30 mL, resulting in the highest seedling vigour index and germination percentage. This reduces the need for fertilizers and lessens environmental impact.

Investigating the efficiency of electrocoagulation using similar/dissimilar electrodes for the detoxification of Coralene Rubine dye: a cost effective approach.

Efficient treatment of textile dyeing wastewater can be achieved through electrocoagulation (EC) with minimal sludge production; however, the selection of the appropriate electrode is essential in lowering overall costs. Also, the reuse of the treated aqueous azo dye solution from this process has not been explored in detail. With these objectives, this study aims to treat synthetic azo dye solutions and achieve high colour removal efficiency (CRE%) using similar (Ti-Ti) and dissimilar (Ti-Cu) metal electrodes through EC with an attempt to reduce the cost. The aqueous Coralene Rubine GFL azo dye was used to examine the efficiency and cost of the EC process. X-Ray Photoelectron Spectroscopy was used to study the EC mechanism, while High Performance Liquid Chromatography was used to analyse the degradation of the dye and the formation of intermediate compounds. The concentration of metal ions in the treated dye solution was quantified using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), with Ti-Ti treated solution having 14.20 mg/L concentration of Ti and Ti-Cu treated solution having 0.078 mg/L of Ti and 0.001 mg/L of Cu, respectively. Colour removal efficiency of 99.49% was obtained for both electrode sets, with a lower operating time and voltage for dissimilar metal combination. Ecotoxicity studies showed negligible toxicity of Ti-Cu treated dye samples compared to untreated solutions. Survival rate, protein estimation, and catalase activity was used to validate the treatment method's efficacy. The study found that the dissimilar electrode material exhibited reduced toxicity due to the presence of heavy metals below the permissible limit.

Treatment of azo dye-containing wastewater in a combined UASB-EMBR system: Performance evaluation and membrane fouling study.

This work investigated the treatment of azo dye-containing wastewater in an upflow anaerobic sludge blanket (UASB) reactor combined with an electro-membrane bioreactor (EMBR). Current densities of 20 A m-2 and electric current exposure mode of 6'ON/30'OFF were applied to compare the performance of the EMBR to a conventional membrane bioreactor (MBR). The results showed that dye (Drimaren Red CL-7B) removal occurred predominantly in the UASB reactor, which accounted for 57% of the total dye removal achieved by the combined system. When the MBR was assisted by electrocoagulation, the overall azo dye removal efficiency increased from 60.5 to 67.1%. Electrocoagulation batch tests revealed that higher decolorization rates could be obtained with a current density of 50 A m-2. Over the entire experimental period, the combined UASB-EMBR system exhibited excellent performance in terms of chemical oxygen demand (COD) and NH4+-N removal, with average efficiencies above 97%, while PO43--P was only consistently removed when the electrocoagulation was used. Likewise, a consistent reduction in the absorption spectrum of aromatic amines was observed when the MBR was electrochemically assisted. In addition to improving the pollutants removal, the use of electrocoagulation reduced the membrane fouling rate by 68% (0.25-0.08 kPa d-1), while requiring additional energy consumption and operational costs of 1.12 kWh m-3 and 0.32 USD m-3, respectively. Based on the results, it can be concluded that the combined UASB-EMBR system emerges as a promising technological approach for textile wastewater treatment.

Estimation for Raw Material Plants of a Henna Product Using LC-High Resolution MS and Multivariate Analysis.

Henna is a plant-based dye obtained from the powdered leaf of the pigmented plant Lawsonia inermis, and has often been used for grey hair dyeing, treatment, and body painting. As a henna product, the leaves of Indigofera tinctoria and Cassia auriculata can be blended to produce different colour variations. Although allergy from henna products attributed to p-phenylenediamine, which is added to enhance the dye, is reported occasionally, raw material plants of henna products could also contribute to the allergy. In this study, we reported that raw material plants of commercial henna products distributed in Japan can be estimated by LC-high resolution MS (LC-HRMS) and multivariate analysis. Principal Component Analysis (PCA) score plot clearly separated 17 samples into three groups [I; henna, II; blended henna primarily comprising Indigofera tinctoria, III; Cassia auriculata]. This grouping was consistent with the ingredient lists of products except that one sample listed as henna was classified as Group III, indicating that its ingredient label may differ from the actual formulation. The ingredients characteristic to Groups I, II, and III by PCA were lawsone (1), indirubin (2), and rutin (3), respectively, which were reported to be contained in each plant as ingredients. Therefore, henna products can be considered to have been manufactured from these plants. This study is the first to estimate raw material plants used in commercial plant-based dye by LC-HRMS and multivariate analysis.

Efficacy of activated carbon using Salvadora persica stem for remediation of potentially toxic dyes from aqueous solution.

Potentially toxic dyes are introduced mainly to rivers through industrial effluents which have a high risk to human health and aquatic life. Activated carbon (AC) from the stem of Salvadora persica was synthesised to take off toxic industrial dyes from an aqueous solution. KOH was used as the activating agent throughout the preparation process for the AC. The morphology and composition of the prepared AC were studied by various analytical methods. From the overall results, it was found that the prepared AC is highly porous and thermal stability gained around 800 ℃. At room temperature, remediation of the dyes (cationic dye, methyl red and anionic dye, methylene blue) using the adsorption method was carried out to ascertain the impact of time and the quantity of AC on methylene blue (MB) and methyl red (MR) removal. During the initial 60 min, equilibrium was attained for the optimum dye concentration (200 mg/L). The data for adsorption on the AC obtained at equilibrium were examined by the Langmuir and Freundlich isotherm models. Both the isotherms accurately predicted the data, with regression values of 0.99 for MR and 0.90 for MB, respectively. The equilibrium adsorption data was also analysed by kinetic models. The adsorption data well fitted in 2nd order kinetic model. The results of MB and MR adsorption from solutions have demonstrated that the stem of Salvadora persica is one of the cheap and more eco-friendly options for remediation of toxic dyes from aqueous solutions.

Natural dyes developed by microbial-nanosilver to produce antimicrobial and anticancer textiles.

Developing special textiles (for patients in hospitals for example) properties, special antimicrobial and anticancer, was the main objective of the current work. The developed textiles were produced after dyeing by the novel formula of natural (non-environmental toxic) pigments (melanin amended by microbial-AgNPs). Streptomyces torulosus isolate OSh10 with accession number KX753680.1 was selected as a superior producer for brown natural pigment. By optimization processes, some different pigment colors were observed after growing the tested strain on the 3 media. Dextrose and malt extract enhanced the bacteria to produce a reddish-black color. However, glycerol as the main carbon source and NaNO3 and asparagine as a nitrogen source were noted as the best for the production of brown pigment. In another case, starch as a polysaccharide was the best carbon for the production of deep green pigment. Peptone and NaNO3 are the best nitrogen sources for the production of deep green pigment. Microbial-AgNPs were produced by Fusarium oxysporum with a size of 7-21 nm, and the shape was spherical. These nanoparticles were used to produce pigments-nanocomposite to improve their promising properties. The antimicrobial of nanoparticles and textiles dyeing by nanocomposites was recorded against multidrug-resistant pathogens. The new nanocomposite improved pigments' dyeing action and textile properties. The produced textiles had anticancer activity against skin cancer cells with non-cytotoxicity detectable action against normal skin cells. The obtained results indicate to application of these textiles in hospital patients' clothes.

Ca-doped ZnO nanoparticles for MB dye degradation and adsorptive removal of tinidazole.

Industrial dye degradation involves several processes by which dyes are broken down, ideally into innocuous products. Methylene blue (MB) is one of the most commonly employed dyes in the textile industry and is released into water in routine industry processes. These discharges lead to creating a nocuous nature for humans and animals. Drugs are also discharged into water bodies from various pharmaceutical industries. In these two contexts, in the present work, the green synthesis of calcium-doped zinc oxide nanoparticles (Ca-doped ZnO NPs) is achieved using the aqueous peel extract of Citrus limetta by the solution combustion technique. The structural, morphological, and optical properties of the synthesized Ca-doped ZnO NPs are investigated using XRD, FTIR, SEM, EDX, and UV-visible spectroscopy. The prepared NPs were subjected to photocatalytic degradation of MB dye under visible-light illumination, which shows ~ 95% dye degradation. The synthesized Ca-doped ZnO NPs were also employed to adsorb tinidazole (TDZ), a nitroimidazole antibiotic, from water samples. An excellent adsorptive capacity of the NPs was observed for selectively adsorbing the TDZ ~ 96.2%. The drug TDZ was found to have pseudo-second-order kinetics. The catalyst recycling proved its repeatability; removal of the dye reached up to 92% after three successive usages. Therefore, using waste Citrus limetta peel extract, the multifunctional Ca-doped ZnO NPs were synthesized, which maintained effective adsorption potential and photocatalytic abilities and could be used as an effective material for environmental remediation.

Application of Optimization Response Surface for the Adsorption of Methylene Blue Dye onto Zinc-coated Activated Carbon.

The activated carbon was produced in the first phase of this investigation by chemically activating hazelnut shell waste with H3PO4. Composite materials were obtained by coating the activated carbon with zinc oxide, whose BET surface area was calculated as 1278 m2 g-1. ZnO-doped ZnO/AC composite was synthesized as an adsorbent for its possible application in the elimination of organic dyestuff MB, and its removal efficiency was investigated. Morphological properties of ZnO/AC were characterized using analytical methods such as XRD, SEM, and BET. The adsorption system and its parameters were investigated and modeled using the response surface method of batch adsorption experiments. The experimental design consisted of three levels of pH (3, 6.5, and 10), initial MB concentration (50, 100, and 150 mg L-1), dosage (0.1, 0.3, and 0.5 g 100 mL-1), and contact time (5, 50, and 95 min). The results from the RSM suggested that the MB removal efficiency was 98.7% under the optimum conditions of the experimental factors. The R2 value, which expresses the significance of the model, was determined as 99.05%. Adsorption studies showed that the equilibrium data fit well with the Langmuir isotherm model compared to Freundlich. The maximum adsorption capacity was calculated as 270.70 mg g-1.

The Effect of Conjugated Nitrile Structures as Acceptor Moieties on the Photovoltaic Properties of Dye-Sensitized Solar Cells: DFT and TD-DFT Investigation.

A major challenge in improving the overall efficiency of dye-sensitized solar cells is improving the optoelectronic properties of small molecule acceptors. This work primarily investigated the effects of conjugation in nitriles incorporated as acceptor moieties into a newly designed series of D-A-A dyes. Density functional theory was employed to specifically study how single-double and single-triple conjugation in nitriles alters the optical and electronic properties of these dyes. The Cy-4c dye with a highly conjugated nitrile unit attained the smallest band gap (1.80 eV), even smaller than that of the strong cyanacrylic anchor group (2.07 eV). The dyes lacking conjugation in nitrile groups did not contribute to the LUMO, while LUMOs extended from donors to conjugated nitrile components, facilitating intramolecular charge transfer and causing a strong bind to the film surface. Density of state analysis revealed a considerable impact of conjugated nitrile on the electronic properties of dyes through an effective contribution in the LUMO, exceeding the role of the well-known strong 2,1,3-benzothiadiazole acceptor unit. The excited state properties and the absorption spectra were investigated using time-dependent density functional theory (TD-DFT). Conjugation in the nitrile unit caused the absorption band to broaden, strengthen, and shift toward the near-infrared region. The proposed dyes also showed optimum photovoltaic properties; all dyes possess high light-harvesting efficiency (LHE) values, specifically 96% for the dyes Cy-3b and Cy-4c, which had the most conjugated nitrile moieties. The dyes with higher degrees of conjugation had longer excitation lifetime values, which promote charge transfer by causing steady charge recombination at the interface. These findings may provide new insights into the structure of conjugated nitriles and their function as acceptor moieties in DSSCS, which may lead to the development of extremely effective photosensitizers for solar cells.

Bionanomining: bioengineered CuO nanoparticles from mining and organic waste for photo-catalytic dye degradation.

The novel bioengineered CuO nanoparticles were successfully synthesized directly using green chemistry, the nontoxic and renewable aqueous extract of waste papaya peel (Carica papaya) as a precursor. The XRD analysis indicated a monoclinic phase of CuO nanoparticles and a size of 20 nm, and the optical absorption analysis showed a peak in the 264 nm range. In TEM, the morphology of the NPs was observed to be almost spherical with a particle size of 15 nm. The CuO nanoparticles showed good efficiency in the degradation of methylene, obtaining up to 50% in 40 min using 6 mg in 60 ml of MB at 10 mg/L. The novel presented in this work derives from using rock minerals, from which we have directly obtained copper salt and copper oxide nanoparticles. This process not only utilizes ecological green chemistry but also offers an economic advantage by directly producing nanoparticles from the mineral instead of purchasing costly pure chemical reagents and employing novel nanomaterials to purify wastewater.

A review on the application of biochar as an innovative and sustainable biocarrier material in moving bed biofilm reactors for dye removal from environmental matrices.

Dye decolorization through biological treatment techniques has been gaining momentum as it is based on suspended and attached growth biomass in both batch and continuous modes. Hence, this review focused on the contribution of moving bed biofilm reactors (MBBR) in dye removal. MBBR have been demonstrated to be an excellent technology for pollution extraction, load shock resistance, and equipment size and energy consumption reduction. The review went further to highlight different biocarrier materials for biofilm development this review identified biochar as an innovative and environmentally friendly material produced through the application of different kinds of reusable or recyclable wastes and biowastes. Biochar as a carbonized waste biomass could be a better competitor and environmentally friendly substitute to activated carbon given its lower mass costs. Biochar can be easily produced particularly in rural locations where there is an abundance of biomass-based trash. Given that circular bioeconomy lowers dependency on natural resources by turning organic wastes into an array of useful products, biochar empowers the creation of competitive goods. Thus, biochar was identified as a novel, cost-effective, and long-term management strategy since it brings about several essential benefits, including food security, climate change mitigation, biodiversity preservation, and sustainability improvement. This review concludes that integrating two treatment methods could greatly lead to better color, organic matter, and nutrients removal than a single biological MBBR treatment process.

Theoretical Insight into Psittacofulvins and Their Derivatives.

Psittacofulvins are polyenal dyes responsible for coloring parrot feathers and protecting them against photo-oxidation, harmful radicals, and bacterial degradation. To explain the unusual properties of these compounds, the thermodynamic and global chemical activity descriptors characterizing four natural and three synthetic psittacofulvins, as well as their hydroxyl, carboxyl and dialdehyde derivatives, were determined. To this aim, the DFT method at the B3LYP/QZVP theory level and the C-PCM solvation model were used. The calculations enabled the selection of the projected compounds for the greatest bioactivity and potential applicability as multifunctional ingredients in medicines, cosmetics, supplements, and food, in which they may play a triple role as preservative, radical scavenger, and coloring agent. The results obtained provide arguments for the identification of a fifth psittacofulvin within the parrot feather pigment, characterized by ten conjugated double bonds (docosadecaenal).

Omics-Based Approaches in Research on Textile Dye Microbial Decolorization.

The development of the textile industry has negative effects on the natural environment. Cotton cultivation, dyeing fabrics, washing, and finishing require a lot of water and energy and use many chemicals. One of the most dangerous pollutants generated by the textile industry is dyes. Most of them are characterized by a complex chemical structure and an unfavorable impact on the environment. Especially azo dyes, whose decomposition by bacteria may lead to the formation of carcinogenic aromatic amines and raise a lot of concern. Using the metabolic potential of microorganisms that biodegrade dyes seems to be a promising solution for their elimination from contaminated environments. The development of omics sciences such as genomics, transcriptomics, proteomics, and metabolomics has allowed for a comprehensive approach to the processes occurring in cells. Especially multi-omics, which combines data from different biomolecular levels, providing an integrative understanding of the whole biodegradation process. Thanks to this, it is possible to elucidate the molecular basis of the mechanisms of dye biodegradation and to develop effective methods of bioremediation of dye-contaminated environments.

Chitosan-loaded biogenic silver nanocomposite for photocatalytic remediation of dye pollutants and antibacterial activity.

The release of industrial wastewater has adverse effects on both aquatic ecosystems and the environment. Discharging untreated organic dyes into aquatic environments significantly amplifies pollution levels in these ecosystems. Ensuring the appropriate disposal of organic colorants and their derivatives before introducing them into wastewater streams is essential to prevent environmental contamination. This study aimed to develop an eco-friendly and sustainable approach to synthesize a chitosan-functionalized silver (Ag) nanocomposite using Solanum trilobatum for color pollutant mitigation. The synthesized CS-Ag nanocomposite was analyzed using various techniques such as UV-visible, FTIR, TEM, and EDS. TEM analysis revealed that the CS-Ag nanocomposite had a spherical nanostructure, with diameters ranging from 17.4 to 43.9 nm. These nanocomposites were tested under visible light irradiation to analyze their photocatalytic character against Congo red (CR). The nanocomposite exhibited a remarkable dye removal efficiency of over 93.6% within 105 min under irradiation. In the experimental recycling study, the CS-Ag nanocomposites demonstrated remarkable stability and reusability. Furthermore, the CS-Ag nanocomposite exhibited promising inhibition activity against bacterial pathogens. Our research revealed that the synthesized nanocomposite has the potential to act as a highly effective photocatalyst and bactericidal agent in various industrial and clinical applications.

C.I. Acid Black 1 transfer from dilute solution to perlite framework in organic waste management.

Dyes, considered as toxic and persistent pollutants, must be removed from organic wastes prior to their composting and application in sustainable agriculture. Azo dyes, capable of altering the physicochemical properties of soil, are difficult to expel by conventional wastewater treatments. C.I. Acid Black 1 (AB 1), a sulfonated azo dye, inhibits nitrification and ammonification in the soil, lessens the nitrogen use efficacy in crop production and passes substantially unaltered through an activated sludge process. The retention of C.I. Acid Black 1 by raw and expanded perlite was investigated in order to examine the potential effectiveness of this aluminosilicate material toward organic waste cleanup. Dye adsorption proved spontaneous and endothermic in nature, increasing with temperature for both perlites. Expanded perlite having a more open structure exhibited a better performance compared to the raw material. Several of the most widely recognized two-parameter theoretical models, i.e., Langmuir, Freundlich, Temkin, Brunauer-Emmett-Teller (BET), Harkins-Jura, Halsey, Henderson, and Smith, were applied to reveal physicochemical features characterizing the adsorption. The Langmuir, Freundlich, Temkin, BET, Henderson, and Smith equations best fitted experimental data indicating that the adsorption of anionic dye on perlites is controlled by their surface, i.e., non-uniformity in structure and charge. This heterogeneity of surface is considered responsible for promoting specific dye adsorption areas creating dye "islands" with local dye supersaturations.

Removal enhancement of persistent basic fuchsin dye from wastewater using an eco-friendly, cost-effective Fenton process with sodium percarbonate and waste iron catalyst.

In this comprehensive investigation, we evaluate the efficacy of the Fenton process in degrading basic fuchsin (BF), a resistant dye. Our primary focus is on the utilization of readily available, environmentally benign, and cost-effective reagents for the degradation process. Furthermore, we delve into various operational parameters, including the quantity of sodium percarbonate (SPC), pH levels, and the dimensions of waste iron bars, to optimize the treatment efficiency. In the course of our research, we employed an initial SPC concentration of 0.5 mM, a pH level of 3, a waste iron bar measuring 3.5 cm in length and 0.4 cm in diameter, and a processing time of 10 min. Our findings reveal the successful elimination of the BF dye, even when subjected to treatment with diverse salts and surfactants under elevated temperatures and acidic conditions (pH below 3). This underscores the robustness of the Fenton process in purifying wastewater contaminated with dye compounds. The outcomes of our study not only demonstrate the efficiency of the Fenton process but highlight its adaptability to address dye contamination challenges across various industries. Critically, this research pioneers the application of waste iron bars as a source of iron in the Fenton reaction, introducing a novel, sustainable approach that enhances the environmental and economic viability of the process. This innovative use of recycled materials as catalysts represents a significant advancement in sustainable chemical engineering practices.

Unveiling the Nature of lignin's Interaction with Molecules: A Mechanistic Understanding of Adsorption of Methylene Blue Dye.

The valorization of lignin into advanced materials for water and soil remediation is experiencing a surge in demand. However, it is imperative that material research and manufacturing be sustainable to prevent exacerbating environmental issues. Meeting these requirements necessitates a deeper understanding of the role of lignin's functional groups in attracting targeted species. This research delves into the interaction mechanisms between lignin and organic molecules, using the adsorption of the cationic dye Methylene Blue (MB+) as a case study. Herein, we aim to quantitatively estimate the contribution of different interaction types to the overall adsorption process. While carbonyl groups were found to have no significant role in attraction, carboxylic groups (-COOH) exhibited significantly lower adsorption compared with hydroxyl groups (-OH). Through alternately blocking aliphatic and phenolic -OH groups, we determined that 61% of the adsorption occurred through hydrogen bonding and 38% via electrostatic interactions. Performance studies of modified lignin along with spectroscopic methods (XPS, FTIR) confirmed the negligible role of π-π interactions in adsorption. This study offers fundamental insights into the mechanistic aspects of MB adsorption on lignin, laying the groundwork for potential modifications to enhance the performance of lignin-based adsorbents. The findings underscore the importance of hydroxyl groups and provide a roadmap for future studies examining the influence of steric factors and interactions with other organic molecules.

Colorimetric strategies applicable for loop-mediated isothermal amplification.

In recent years, loop-mediated isothermal amplification (LAMP) has gained popularity for detecting various pathogen-specific genes due to its superior sensitivity and specificity compared to conventional polymerase chain reaction (PCR). The simplicity and flexibility of naked-eye detection of the amplicon make LAMP an ideal rapid and straightforward diagnostic tool, especially in resource-limited laboratories. Colorimetric detection is one of the simplest and most straightforward among all detection methods. This review will explore various colorimetric dyes used in LAMP techniques, examining their reaction mechanisms, advantages, limitations and latest applications.

The oligomeric states of dye-decolorizing peroxidases from Streptomyces lividans and their implications for mechanism of substrate oxidation.

A common evolutionary mechanism in biology to drive function is protein oligomerization. In prokaryotes, the symmetrical assembly of repeating protein units to form homomers is widespread, yet consideration in vitro of whether such assemblies have functional or mechanistic consequences is often overlooked. Dye-decolorizing peroxidases (DyPs) are one such example, where their dimeric α + ß barrel units can form various oligomeric states, but the oligomer influence, if any, on mechanism and function has received little attention. In this work, we have explored the oligomeric state of three DyPs found in Streptomyces lividans, each with very different mechanistic behaviors in their reactions with hydrogen peroxide and organic substrates. Using analytical ultracentrifugation, we reveal that except for one of the A-type DyPs where only a single sedimenting species is detected, oligomer states ranging from homodimers to dodecamers are prevalent in solution. Using cryo-EM on preparations of the B-type DyP, we determined a 3.02 Å resolution structure of a hexamer assembly that corresponds to the dominant oligomeric state in solution as determined by analytical ultracentrifugation. Furthermore, cryo-EM data detected sub-populations of higher-order oligomers, with one of these formed by an arrangement of two B-type DyP hexamers to give a dodecamer assembly. Our solution and structural insights of these oligomer states provide a new framework to consider previous mechanistic studies of these DyP members and are discussed in terms of long-range electron transfer for substrate oxidation and in the "storage" of oxidizable equivalents on the heme until a two-electron donor is available.

Co-adsorption and selective-adsorption of heavy metals and dyes from aqueous solution by bio-based humus/chitosan hydrogels.

An eco-friendly adsorbent was prepared by reverse suspension crosslinking method to remove multiple pollutants from aqueous solution. Both raw materials, derived from humus (HS) and chitosan (CS), are biodegradable and low-cost natural biopolymers. After combining HS with CS, the adsorption capacity was significantly improved due to compensation effects between the two components. HS/CS exhibited the features of amphoteric adsorption through pH adjustment, enabling it to adsorb not only anionic pollutants (Methyl Orange (MO) and Cr(VI)), but also cationic ones (Methylene Blue (MB) and Pb(II)). The adsorption capacities were approximately 242 mg/g, 69 mg/g, 188 mg/g and 57 mg/g for MO, Cr(VI), MB and Pb(II), respectively. HS/CS showed a slight preference for MO in MO/Cr(VI) co-adsorption system, whereas strong selectivity for MB over Pb(II) in MB/Pb(II) system under acidic condition (pH<3.0). This selective behavior would allow for potential applications in separating MB/Pb(II) effluents and selectively recycling Pb(II) in acidic environment. The isothermal and kinetic adsorption behaviors followed Langmuir model and pseudo-second-order model, respectively. The density functional theory (DFT) confirmed that the interaction between metal ions and adsorbents was primarily attributed to chelation and electrostatic adsorption, owing to nitric and oxygenic functional groups. Whereas, the adsorption mechanisms for dyes were involved in electrostatic attraction, H-bond and π-π bond, due to available hydrogen, oxygen, nitrogen atoms and aromatic groups on the surface of adsorbent and adsorbates. The adsorbent could be efficiently regenerated and retained over 90% of its adsorption capacity after five cycles, which has a potential for practical applications in water treatment.