Production and characterization of extracellular liamocins produced from fungal strains of Aureobasidium spp.

Liamocins, a group of high-density glycolipids, are only produced by certain strains of the yeast-like fungi in the genus Aureobasidium. Until now, few studies have focused on the surfactant properties of liamocins produced from the highly diverse tropical strains of Aureobasidium. Therefore, the aims of this research were to screen the liamocin production from tropical strains of Aureobasidium spp. and to characterize their surfactant properties. A total of 41 strains of Thai Aureobasidium spp. were screened for their ability to produce liamocins, and the products were detected using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and thin-layer chromatography. Of those strains, 30 strains of Aureobasidium spp. tested were found to produce liamocins with yields ranging from 0.53 to 10.60 g/l. The nature of all crude liamocins was heterogeneous, with different compositions and ratios depending on the yeast strain. These liamocins exhibited relatively high emulsifying activity against vegetable oils tested, with an emulsification index of around 40-50%; the emulsion stability of some liamocins was up to 30 days. The obtained critical micelle concentration values were varied, with those ​​of liamocins produced from A. pullulans, A. melanogenum and A. thailandense falling in ranges from 7.70 to 119.78, 10.73 to > 1,000, and 68.56 to > 1,000 mg/l, respectively. The emulsification activity of liamocins was higher than that of the analytical grade rhamnolipids. These compounds showed strong surface tension reduction in a sodium chloride concentration range of 2-12% (w/v), pH values between 3 and 7, and temperatures between 4 and 121 °C. This is the first report of liamocins produced by A. thailandense.

Rice proteins - Gum arabic coacervates: Effect of pH and polysaccharide concentration in oil-in-water emulsion stability.

In the context of replacing animal proteins in food matrices, rice proteins (RP) become promised because they come from an abundant plant source, are hypoallergenic, and have high digestibility and nutritional value. However, commercial protein isolates obtained by spray drying have low solubility and poor functionality, especially in their isoelectric point. One way to modify these properties is through interaction with polysaccharides, such as gum arabic (GA). Therefore, this work aims to evaluate the effects of pH and GA concentration on the interaction and emulsifying activity of RP:GA coacervates. First, the effects of pH (2.5 to 7.0) and GA concentrations (0.2 to 1.0 wt%, giving rise to RP:GA mass ratios of 1:0.2 to 1:1.0) in RP:GA blends were evaluated. The results demonstrated that biopolymers present opposite net charges at pH between 2.5 and 4.0. At pH 3.0, insoluble coacervates with complete charge neutralization were formed by electrostatic interactions, while at pH 5.0 it was observed that the presence of GA prevented the RP massive aggregation. Second, selected blends with 0.4 or 1.0 wt% of GA (RP:GA mass ratios of 1:0.4 or 1:1.0) at pH 3.0 or 5.0 were tested for their ability to stabilize oil-in-water emulsions. The emulsions were characterized for 21 days. It was observed that the GA increased the stability of RP emulsions, regardless of the pH and polysaccharide concentration. Taken together, our results show that it is possible to combine RP and GA to improve the emulsifying properties of these plant proteins at pH conditions close to their isoelectric point, expanding the possibility of implementation in food systems.

Enhancing cannabidiol bioaccessibility using ionic liquid as emulsifier to produce nanosystems: Characterization of structures, cytotoxicity assessment, and in vitro digestion.

The emulsifying potential of a biocompatible ionic liquid (IL) to produce lipid-based nanosystems developed to enhance the bioaccessibility of cannabidiol (CBD) was investigated. The IL (cholinium oleate) was evaluated at concentrations of 1 % and 2 % to produce nanoemulsions (NE-IL) and nanostructured lipid carriers (NLC-IL) loaded with CBD. The IL concentration of 1 % demonstrated to be sufficient to produce both NE-IL and NLC-IL with excellent stability properties, entrapment efficiency superior to 99 %, and CBD retention rate of 100 % during the storage period evaluated (i.e. 28 days at 25 °C). The in vitro digestion evaluation demonstrated that the NLC-IL provided a higher stability to the CBD, while the NE-IL improved the CBD bioaccessibility, which was mainly related to the composition of the lipid matrices used to obtain each nanosystem. Finally, it was observed that the CBD cytotoxicity was reduced when the compound was entrapped into both nanosystems.

The essential role of aggregation for the emulsifying ability of a fungal CYS-rich protein.

Biosurfactants are in demand by the global market as natural commodities suitable for incorporation into commercial products or utilization in environmental applications. Fungi are promising producers of these molecules and have garnered interest also for their metabolic capabilities in efficiently utilizing recalcitrant and complex substrates, like hydrocarbons, plastic, etc. Within this framework, biosurfactants produced by two Fusarium solani fungal strains, isolated from plastic waste-contaminated landfill soils, were analyzed. Mycelia of these fungi were grown in the presence of 5% olive oil to drive biosurfactant production. The characterization of the emulsifying and surfactant capacity of these extracts highlighted that two different components are involved. A protein was purified and identified as a CFEM (common in fungal extracellular membrane) containing domain, revealing a good propensity to stabilize emulsions only in its aggregate form. On the other hand, an unidentified cationic smaller molecule exhibits the ability to reduce surface tension. Based on the 3D structural model of the protein, a plausible mechanism for the formation of very stable aggregates, endowed with the emulsifying ability, is proposed. KEY POINTS: • Two Fusarium solani strains are analyzed for their surfactant production. • A cationic surfactant is produced, exhibiting the ability to remarkably reduce surface tension. • An identified protein reveals a good propensity to stabilize emulsions only in its aggregate form.

Agar-gelatin Maillard conjugates used for Pickering emulsion stabilization.

A few protein- and polysaccharide-based particles have shown promising potential as stabilizers in multi-phase food systems. By incorporating polymer-based particles and modifying the wettability of colloidal systems, it is possible to create particle-stabilized emulsions with excellent stability. A Pickering emulsifier (AGMs) with better emulsifying properties was obtained by the Maillard reaction between acid-hydrolysed agar and gelatin. Laser confocal microscopy imaging revealed that AGMs particles can be used as solid emulsifiers to produce a typical O/W Pickering emulsion, with AGMs adsorbing onto the droplet surface to form a dense interfacial layer. Cryo-scanning electron microscopy analysis showed that AGMs self-assembled into a three-dimensional network structure, which prevented droplets aggregation through strong spatial site resistance, contributing to emulsion stabilization. These emulsions exhibited stability within a pH range of 1 to 11, NaCl concentrations not exceeding 300 mM, and at temperatures below 80 °C. The most stable emulsion oil-water ratio was 6:4 at a particle concentration of 0.75 % (w/v). AGMs-stabilized Pickering emulsion was utilized to create a semi-solid mayonnaise as a replacement for hydrogenated oil. Rheological analysis demonstrated that low-fat mayonnaise stabilized with AGMs exhibited similar rheological behavior to traditional mayonnaise, offering new avenues for the application of Pickering emulsions in the food industry.

Effects of emulsifiers on lipid metabolism and performance of yellow-feathered broilers.

BACKGROUND: Reducing production costs while producing high-quality livestock and poultry products is an ongoing concern in the livestock industry. The addition of oil to livestock and poultry diets can enhance feed palatability and improve growth performance. Emulsifiers can be used as potential feed supplements to improve dietary energy utilization and maintain the efficient productivity of broilers. Therefore, further investigation is warranted to evaluate whether dietary emulsifier supplementation can improve the efficiency of fat utilization in the diet of yellow-feathered broilers. In the present study, the effects of adding emulsifier to the diet on lipid metabolism and the performance of yellow-feathered broilers were tested. A total of 240 yellow-feasted broilers (21-day-old) were randomly divided into 4 groups (6 replicates per group, 10 broilers per replicate, half male and half female within each replicate). The groups were as follows: the control group (fed with basal diet), the group fed with basal diet supplemented with 500 mg/kg emulsifier, the group fed with a reduced oil diet (reduced by 1%) supplemented with 500 mg/kg emulsifier, and the group fed with a reduced oil diet supplemented with 500 mg/kg emulsifier. The trial lasted for 42 days, during which the average daily feed intake, average daily gain, and feed-to-gain ratio were measured. Additionally, the expression levels of lipid metabolism-related genes in the liver, abdominal fat and each intestinal segment were assessed. RESULTS: The results showed that compared with the basal diet group, (1) The average daily gain of the basal diet + 500 mg/kg emulsifier group significantly increased (P < 0.05), and the half-even-chamber rate was significantly increased (P < 0.05); (2) The mRNA expression levels of Cd36, Dgat2, Apob, Fatp4, Fabp2, and Mttp in the small intestine were significantly increased (P < 0.05). (3) Furthermore, liver TG content significantly decreased (P < 0.05), and the mRNA expression level of Fasn in liver was significantly decreased (P < 0.05), while the expression of Apob, Lpl, Cpt-1, and Pparα significantly increased (P < 0.05). (4) The mRNA expression levels of Lpl and Fatp4 in adipose tissue were significantly increased (P < 0.05), while the expression of Atgl was significantly decreased (P < 0.05). (5) Compared with the reduced oil diet group, the half-evading rate and abdominal fat rate of broilers in the reduced oil diet + 500 mg/kg emulsifier group were significantly increased (P < 0.05), and the serum level of LDL-C increased significantly (P < 0.05)0.6) The mRNA expression levels of Cd36, Fatp4, Dgat2, Apob, and Mttp in the small intestine were significantly increased (P < 0.05). 7) The mRNA expression levels of Fasn and Acc were significantly decreased in the liver (P < 0.05), while the mRNA expression levels of Lpin1, Dgat2, Apob, Lpl, Cpt-1, and Pparα were significantly increased (P < 0.05). CONCLUSIONS: These results suggest that dietary emulsifier can enhance the fat utilization efficiency of broilers by increasing the small intestinal fatty acid uptake capacity, inhibiting hepatic fatty acid synthesis and promoting hepatic TG synthesis and transport capacity. This study provides valuable insights for the potential use of emulsifier supplementation to improve the performance of broiler chickens.

Common dietary emulsifiers promote metabolic disorders and intestinal microbiota dysbiosis in mice.

Dietary emulsifiers are linked to various diseases. The recent discovery of the role of gut microbiota-host interactions on health and disease warrants the safety reassessment of dietary emulsifiers through the lens of gut microbiota. Lecithin, sucrose fatty acid esters, carboxymethylcellulose (CMC), and mono- and diglycerides (MDG) emulsifiers are common dietary emulsifiers with high exposure levels in the population. This study demonstrates that sucrose fatty acid esters and carboxymethylcellulose induce hyperglycemia and hyperinsulinemia in a mouse model. Lecithin, sucrose fatty acid esters, and CMC disrupt glucose homeostasis in the in vitro insulin-resistance model. MDG impairs circulating lipid and glucose metabolism. All emulsifiers change the intestinal microbiota diversity and induce gut microbiota dysbiosis. Lecithin, sucrose fatty acid esters, and CMC do not impact mucus-bacterial interactions, whereas MDG tends to cause bacterial encroachment into the inner mucus layer and enhance inflammation potential by raising circulating lipopolysaccharide. Our findings demonstrate the safety concerns associated with using dietary emulsifiers, suggesting that they could lead to metabolic syndromes.

Development of Novel High and Low Emulsifier Diets Based upon Emulsifier Distribution in the Australian Food Supply for Intervention Studies in Crohn's Disease.

BACKGROUND: The aims of this study were to develop and evaluate a high/low-emulsifier diet and compare emulsifier content with preclinical studies that have associated Crohn's disease with emulsifiers. METHODS: Supermarkets were audited with a seven-day high- (HED) and low-emulsifier diet (LED) meal plan developed. The emulsifier content of food was sought from food manufacturers, compared to acceptable daily intake (ADI), and doses were provided in trials. Nutritional composition analysis was completed. Healthy adults ate these diets for seven days in a randomized single-blinded cross-over feeding study to assess palatability, tolerability, satiety, food variety, dietary adherence, blinding and the ease of following the meal plan via visual analogue scale. RESULTS: A database of 1680 foods was created. There was no difference in nutritional content between the HED and LED, except HED had a higher ultra-processed food content (p < 0.001). The HED contained 41 emulsifiers, with 53% of the products able to be quantified for emulsifiers (2.8 g/d), which did not exceed the ADI, was similar to that in observational studies, and was exceeded by doses used in experimental studies. In ten participants, diets were rated similarly in palatability-HED mean 62 (5% CI 37-86) mm vs. LED 68 (54-82) mm-in tolerability-HED 41 (20-61) mm vs. LED 55 (37-73) mm-and in satiety HED 57 (32-81) mm vs. LED 49 (24-73) mm. The combined diets were easy to follow (82 (67-97) mm) with good variety (65 (47-81)) and excellent adherence. CONCLUSION: Nutritionally well-matched HED and LED were successfully developed, palatable and well tolerated.

Sonication as a potential tool in the formation of protein-based stable emulsion - Concise review.

Emulsion systems are extensively used in the food processing sector and the use of natural emulsifiers like proteins for stabilizing emulsion has been in demand from consumers due to increased awareness about the consumption of healthy food. Numerous methods are available for the preparation of emulsion, but ultrasound got more attention among common methods owing to its economical and environment-friendly characteristics. The physical effects caused by to bursting of the cavity bubble, result in reduced droplet size, thus forming an emulsion with appreciable stability. Ultrasound ameliorates the emulsifying characteristics of natural emulsifiers like protein and improves the storage stability of the emulsion by positively boosting the rheological, emulsifying characteristics, improving zeta potential, and reducing average droplet size. The stability of protein-based emulsion is affected by environmental stresses hence conjugate of protein with polysaccharide showed good emulsifying characteristics. However, the data on the effect of ultrasound parameters on emulsifier properties is lacking and there is a need to develop a sonication device that can carry out large-scale emulsification operation. The review covers the principles and mechanisms of ultrasound-assisted formation of protein-based and protein-based conjugate emulsions. Further, the effect of ultrasound on various characteristics of protein-based emulsion is also explored. This review will provide concise data to the researchers to extend their experiments in the area of ultrasound emulsification which will help in commercializing the technology at the industrial scale.

Performance of ß-carotene-loaded nanostructured lipid carriers under dynamic in vitro digestion system: Influence of the emulsifier type.

A better understanding of how emulsifier type could differently influence the behavior of nanostructured lipid carriers (NLC) under the gastrointestinal digestion process, as well as at the cellular level, is of utmost importance for the NLC-based formulations' optimization and risk assessment in the food field. In this study, NLC composed by fully hydrogenated soybean and high-oleic sunflower oils were prepared using soy lecithin (NLC Lß) or Tween 80 (NLC Tß) as an emulsifier. ß-Carotene was entrapped within NLC developed as a promising strategy to overcome ß-carotene's low bioavailability and stability. The effect of emulsifier type on the digestibility of ß-carotene-loaded NLC was evaluated using an in vitro dynamic digestion model mimicking peristalsis motion. The influence of ß-carotene-loaded NLC on cell viability was assessed using Caco-2 cells in vitro. NLC Tß remained stable in the gastric compartment, presenting particle size (PS) similar to the initial NLC (PS: 245.68 and 218.18 nm, respectively), while NLC Lß showed lower stability (PS > 1000 nm) in stomach and duodenum phases. NLC Tß also provided high ß-carotene protection and delivery capacity (i.e., ß-carotene bioaccessibility increased 10-fold). Based on the results of digestion studies, NLC Tß has shown better physical stability during the passage through the in vitro dynamic gastrointestinal system than NLC Lß. Moreover, the developed NLC did not compromise cell viability up to 25 µg/mL of ß-carotene. Thus, the NLC developed proved to be a biocompatible structure and able to incorporate and protect ß-carotene for further food applications. PRACTICAL APPLICATION: The findings of this study hold significant implications for industrial applications in terms of developing nanostructured lipid carriers from natural raw materials widely available and used to produce other lipid-based products in the food industry, as an alternative to synthetic ones. In this respect, the ß-carotene-loaded NLC developed in this study would find a great industrial application in the food industry, which is in constant search to develop functional foods capable of increasing the bioavailability of bioactive compounds.

Harnessing therapeutic deep eutectic solvents in self-emulsifying systems to improve CBD delivery.

In this study, Cannabidiol crystals (CBD) were used as a BCS class II model drug to generate a novel therapeutic deep eutectic solvent (THEDES) with easy preparation using caprylic acid (CA). The hydrogen bonding interaction was confirmed by different techniques such as FT-IR and NMR, resulting in a hydrophobic system suitable for liquid formulations. The CBD-based THEDES, combined with a specific mixture of surfactants and co-surfactants, successfully formed a self-emulsifying drug delivery system (SEDDS) that generated uniform nano-sized droplets once dispersed in water. Hence, the THEDES showed compatibility with the self-emulsifying approach, offering an alternative method to load drugs at their therapeutic dosage. Physical stability concerns regarding the unconventional oily phase were addressed through stress tests using multiple and dynamic light scattering, demonstrating the robustness of the system. In addition, the formulated SEDDS proved effective in protecting CBD from the harsh acidic gastric environment for up to 2 h at pH 1.2. Furthermore, in vitro studies have confirmed the safety of the formulation and the ability of CBD to permeate Caco-2 cells when formulated. This investigation highlights the potential incorporation of THEDES in lipid-based formulations like SEDDS, expanding the avenues for innovative oral drug delivery approaches.

Sulfonated cottonseed hydrolysates with adjustable amphiphilicity as environmental -Stress stable emulsifiers.

Cottonseed protein isolate (CPI) is a valuable agro-industrial waste with potential biotechnological applications. However, inadequate stability in water due to its characteristic hinders its widespread use. Therefore, a new sulfonation modification approach was developed to improve the amphiphilicity and structural flexibility of CPI. Structural characterizations confirmed the successful incorporation of sulfonate groups with structural and conformational changes. This significantly unfolded molecular-chain, and improved amphiphilicity, flexibility, and surface-hydrophobicity while reducing pI (5.1-1.7), and molecular-weight (5745-2089 g/mol). The modified samples exhibited improved emulsification with higher amounts of absorbed proteins on the droplet interface, smaller droplet size, and a higher zeta-potential. Additionally, they possessed good emulsification ability under acidic conditions. The nano-emulsions exhibited long-term stability (≥70 days) under different environmental conditions, with excellent fluidity. This study contributes to understanding sulfonation as a viable approach for improving protein properties, thus, opening up new possibilities for their application and maximizing their economic benefits.

Performance of Azolla pinnata fern protein hydrolysates as an emulsifier and nutraceutical ingredient in an O/W emulsion system and their effect on human gut microbiota and mammalian cells.

This study investigated the dual potential of Azolla pinnata fern protein hydrolysates (AFPHs) as functional and nutraceutical ingredients in an oil/water emulsion system. The AFPH-stabilised emulsion (AFPH-E) displayed a small and uniform droplet distribution and was stable to aggregation and creaming over a wide range of pH (5-8), salt concentrations ≤ 100 mM, and heat treatment ≤ 70 °C. Besides, the AFPH-E possessed and maintained strong biological activities, including antihypertensive, antidiabetic, and antioxidant, under different food processing conditions (pH 5-8; NaCl: 50-150 mM, and heat treatment: 30-100 °C). Following in vitro gastrointestinal digestion, the antihypertensive and antioxidant activities were unchanged, while a notable increase of 8% was observed for DPPH. However, the antidiabetic activities were partially reduced in the range of 5-11%. Notably, AFPH-E modulated the gut microbiota and short-chain fatty acids (SCFAs), promoting the growth of beneficial bacteria, particularly Bifidobacteria and Lactobacilli, along with increased SCFA acetate, propionate, and butyrate. Also, AFPH-E up to 10 mg mL-1 did not affect the proliferation of the normal colon cells. In the current work, AFPH demonstrated dual functionality as a plant-based emulsifier with strong biological activities in an oil/water emulsion system and promoted healthy changes in the human gut microbiota.

The structural, antioxidant and emulsifying properties of cellulose nanofiber-dihydromyricetin mixtures: Effects of composite ratio.

In this work, effects of cellulose nanofiber/dihydromyricetin (CNF/DMY) ratio on the structural, antioxidant and emulsifying properties of the CNF/DMY mixtures were investigated. CNF integrated with DMY via hydrogen bonding and the antioxidant capacity of mixtures increased with decreasing CNF/DMY ratio (k). The oxidative stability of emulsions enhanced as the DMY content increased. Emulsions formed at Φ = 0.5 displayed larger size (about 25 µm), better viscoelasticity and centrifugal stability than those at Φ = 0.3 (about 23 µm). The emulsions at k = 17:3 and Φ = 0.5 exhibited the most excellent viscoelasticity. In conclusion, the DMY content in mixtures and the oil phase fraction exhibited distinct synergistic effects on the formation and characteristics of emulsions, and the emulsions could demonstrate superior oxidative and storage stability. These findings could provide a novel strategy to extend the shelf life of cellulose-based emulsions and related products.

Bioemulsifier production by Acinetobacter venetianus AMO1502: Potential for bioremediation and environmentally friendly applications.

At the best conditions of the bioprocess (30 °C, pH 7.0, 3.0 g/L NaCl) were obtained 0.66 g/L cell concentration, 3.3 g/L of bioemulsifier, which showed high emulsifying activity (53 % ± 2), reducing the surface tension of the water in 47.2 % (38 mN/m). The polymeric structure of the purified bioemulsifier comprised a carbohydrate backbone composed of hexose-based amino sugars with a monomeric mass of 1099 Da, structurally similar to emulsan. A. venetianus bioemulsifier is non-phytotoxic (GI% > 80 %) against Ocimum basilicum and Brassica oleracea and non-cytotoxic (LC50 5794 mg/L) against Artemia salina, being safe local organisms in comparison to other less eco-friendly synthetic emulsifiers. This bioemulsifier effectively dispersed spilled oil in vitro (C22-C33), reducing oil mass by 12 % (w/w) and dispersing oil in a displacement area of 75 cm2 (23.8 % of the spilled area). Thus, the isolated A. venetianus AMO1502 produced a bioemulsifier potentially applicable for environmentally friendly oil spill remediation.

Structural characteristics and emulsifying properties of linear dextrin/eicosapentaenoic acid composites: Effect of the degree of polymerization.

This work aimed at building functional emulsions based on the linear dextrins (LDs) emulsion system. The gradient polyethylene glycol (PEG) precipitaion method was used to fractionate LDs into fractions with different degrees of polymerization (DP). A package, and co-precipitation procedure of LDs, and eicosapentaenoic acid (EPA) was used to fabricate LDs-EPA composites. The gas chromatograph, Fourier transform infrared spectroscopy, X-ray diffraction and differential scanning calorimetry analyses affirmed the formation of the LDs-EPA composites. The sizes of these composites were 38.55 nm, 59.14 nm to 80.62 nm, respectively, and they had good amphiphilicity. Compared with LDs, these LDs-EPA composites stabilized Pickering emulsion had higher stability and antioxidant capacity. Their emulsifying ability was positively correlated with the DP values of LDs. Furthermore, the oxidation stability results showed that LDsF10-EPA emulsion had the lowest lipid hydroperoxide (LHs) content, malondioxide (MDA) content and hexal concentration, which were 138.75 mmol kg-1 oil, 15.50 mmol kg-1 oil and 3.83 µmol kg-1 oil, respectively. The study provided a new idea and application values for the application of LDs in emulsion.

Electrostatic spray drying: A new alternative for drying of complex coacervates.

Complex coacervation can be used for controlled delivery of bioactive compounds (i.e., flaxseed oil and quercetin). This study investigated the co-encapsulation of flaxseed oil and quercetin by complex coacervation using soluble pea protein (SPP) and gum arabic (GA) as shell materials, followed by innovative electrostatic spray drying (ES). The dried system was analyzed through encapsulation efficiency (EE) and yield (EY), morphological and physicochemical properties, and stability for 60 days. Small droplet size emulsions were produced by GA (in the first step of complex coacervation) due to its greater emulsifying activity than SPP. Oil EY and EE, moisture, and water activity in dried compositions ranged from 75.7 to 75.6, 76.0-73.4 %, 3.4-4.1 %, and 0.1-0.2, respectively. Spherical microcapsules were created with small and aggregated particle size but stable for 60 days. An amount of 8 % of quercetin remained in the dried coacervates after 60 days, with low hydroperoxide production. In summary, when GA is used as the emulsifier and SPP as the second biopolymer in the coacervation process, suitable coacervates for food applications are obtained, with ES being a novel alternative to obtain coacervates in powder, with improved stability for encapsulated compounds. As a result, this study helps provide a new delivery system option and sheds light on how the characteristics of biopolymers and the drying process affect coacervate formation.

Development of plant-based whole egg analogs using emulsion technology.

RuBisCO is a plant protein that can be derived from abundant and sustainable natural resources (such as duckweed), which can be used as both an emulsifying and gelling agent. Consequently, it has the potential to formulate emulsion gels that can be used for the development of plant-based replacements of whole eggs. In this study, we investigated the ability of RuBisCO-based emulsion gels to mimic the desirable properties of whole eggs. The emulsion gels contained 12.5 wt% RuBisCO and 10 wt% corn oil to mimic the macronutrient composition of real whole eggs. Initially, an oil-in-water emulsion was formed, which was then heated to convert it into an emulsion gel. The impact of oil droplet diameter (∼15, 1, and 0.2 µm) on the physicochemical properties of the emulsion gels was investigated. The lightness and hardness of the emulsion gels increased as the droplet size decreased, which meant that their appearance and texture could be modified by controlling droplet size. Different concentrations of curcumin (3, 6, and 9 mg/g oil) were incorporated into the emulsions using a pH-driven approach. The curcumin was used as a natural dual functional ingredient (colorant and nutraceutical). The yellow-orange color of curcumin allowed us to match the appearance of raw and cooked whole eggs. This study shows that whole egg analogs can be formulated using plant-based emulsion gels containing natural pigments.

Effects of molecular structure and charge state on the foaming and emulsifying properties of Spirulina protein isolates.

Microalgae protein holds great potential for various applications in the food industry. However, the current knowledge regarding microalgae protein remains limited, with little information available on its functional properties. Furthermore, the relationship between its molecular structure and functional properties is not well defined, which limits its application in food processing. This study aims to addresses these gaps though an analysis of the emulsibility and foamability of various soluble protein isolates from two species of Spirulina (Arthospira platensis and Spirulina platensis), and the functional properties of Spirulina protein isolates in relation to its molecular structure and charge state. Results revealed that the degree of cross-linking and aggregation or folding and curling of protein tertiary structures was higher in the highly soluble Spirulina protein isolates (AP50% and SP50%) than in the low-solubility isolates (AP30% and SP30%). The foaming capacity (FC) of AP50% and SP50% was found to be lower than that of AP30% and SP30%. Spirulina protein isolates can stably adsorb at the air-water interface for at least 20 min and possessed good interfacial activity. A high pH value was found to promote cross-linking of protein particles at the oil-water interface, thereby reinforcing the internal network structure of emulsions and increasing viscosity. These findings provide preliminary insights for potential applications of Spirulina protein isolates in food production, especially towards quality improvement.

Influence of emulsifier on lipid oxidation in spray-dried microencapsulated O/W emulsions.

Lipid oxidation limits the shelf-life of dried microencapsulated oils (DMOs), such as infant formula. However, it is poorly understood how lipid oxidation is affected by different types of emulsifiers. To improve our understanding, we prepared DMOs with different emulsifiers (whey protein isolate (WPI), pea protein isolate (PPI), and non-proteinaceous CITREM) and studied lipid oxidation in both the free and encapsulated fat. Only a small difference in oxidation rate was observed between these fat fractions for all formulations. We ascribed this to a non-discrete distribution of the fractions and the subsequent low fractionation selectivity as shown by Raman microscopy. The DMO with PPI showed hardly any oxidation during a 7-week incubation at 40 °C, whereas the DMOs with WPI and CITREM both reached significantly higher contents of oxidation products (lipid hydroperoxides, aldehydes, and epoxides). The enhanced stability of DMO-PPI could not be ascribed to the presence of phytic acid. In conclusion, we demonstrate the potential of using PPI to produce oxidatively stable DMOs.