Combined Irreducible Femoral Head Fracture-Dislocation and Ipsilateral Segmental Femur Fracture: A Case Report.

CASE: A 48-year-old man presented to a Level 1 trauma center after a motor vehicle crash with a right irreducible posterior hip dislocation and ipsilateral fractures of the femoral head and segmental femur shaft. This injury was managed with open reduction and internal fixation and antegrade intramedullary nailing. CONCLUSION: This is the first report of a combined irreducible femoral head fracture-dislocation and a segmental femur fracture, a rare injury that requires a stepwise approach to operative management of each injury. Surgeons must recognize the clinical and radiographic findings associated with irreducible hip dislocations in the setting of ipsilateral fractures to the femoral head and shaft.

Early Clinical Efficacy of Small Incision Reduction and Superior Closed Pin Fixation of Goss-Ideberg Type III Glenoid Fractures using X-ray and CT Scan.

BACKGROUND: Imaging techniques such as X-rays and 3D Computed Tomography (CT) are used to diagnose and evaluate a patient's shoulder before and after surgery. Identifying the kind, location, and severity of a shoulder fracture helps surgeons choose the right treatment and surgery. OBJECTIVES: The study examines the effectiveness of small incision reduction and superior closure pinning in treating Ideberg type III glenoid fractures identified by X-ray and CT scans. MATERIALS AND METHODS: From October 2017 to June 2022, 40 patients with Ideberg type III glenoid fractures underwent mini-incision reduction and superior closed pinning fixation using the Anterior (AA) and Posterior (PA) approaches. Pre- and post-surgery shoulder scores and imaging data were analyzed. Outpatient review and shoulder anteroposterior radiographs were collected at 1, 3, 6, and 12 months after surgery. We assessed shoulder joint function using the American Shoulder and Elbow Society (ASES) shoulder score, VAS score, Constant-Murley Shoulder Outcome (Constant) score, and DASH score. RESULTS: A total of 40 patients were monitored for 14-16 months, averaging 15.2 ± 0.3 months. All fractures were healed between 14-25 weeks from X-rays, averaging 17.6 ± 5.4 weeks. Both the AA and PA groups had similar shoulder score changes. However, the AA group did better. In all cases, ASES shoulder scores were outstanding at 80%. Radiographs demonstratedno traumatic arthritis or internal fixation failure consequences like screw loosening or breakage. CONCLUSION: It was concluded that Ideberg type III glenoid fracture reduction with an anterior small incision and superior closed pinning hollow lag screw internal fixation could be successful.

Virtual surgical planning and use of a 3D-printed, patient-specific reduction system for minimally invasive plate osteosynthesis of diaphyseal tibial fractures in dogs: A historic case control study.

OBJECTIVE: To compare the efficacy and clinical outcomes of computed tomography (CT)-based virtual surgical planning (VSP) and a three-dimensional (3D)-printed, patient-specific reduction system to conventional indirect reduction techniques for diaphyseal tibial fractures stabilized using minimally invasive plate osteosynthesis (MIPO) in dogs. STUDY DESIGN: A prospective clinical study with a historic control cohort. SAMPLE POPULATION: Dogs undergoing MIPO stabilization of diaphyseal tibial fractures using a custom 3D-printed reduction system (3D-MIPO; n = 15) or conventional indirect reduction techniques (c-MIPO; n = 14). METHODS: Dogs were prospectively enrolled to the 3D-MIPO group and CT scans were used to design and fabricate a custom 3D-printed reduction system to facilitate MIPO. Medical records were searched to identify dogs for the c-MIPO group. Pre-, intra- and postoperative parameters were compared between groups. RESULTS: The duration from presentation until surgery was 23 h longer in the 3D-MIPO group (p = .002). Fewer intraoperative fluoroscopic images were acquired (p < .001) and mean surgical duration was 34 min shorter in the 3D-MIPO group (p = .014). Median postoperative tibial length, frontal alignment, and sagittal alignment were within 4 mm, 3° and 3°, respectively, of the contralateral tibia in both groups and did not differ between reduction groups (p > .1). Postoperative complications occurred in 27% and 14% of fractures in the 3D-MIPO and c-MIPO groups, respectively. CONCLUSION: Both reduction methods yielded comparable results. Although the preoperative planning and guide preparation was time consuming, surgery times were shorter and fluoroscopy use was less in the 3D-MIPO group. CLINICAL SIGNIFICANCE: VSP and the custom 3D-printed reduction system facilitated efficient MIPO.

Does the Nonunion Rate of Atypical Femoral Fractures Differ According to Fracture Site?: A Meta-Analysis.

Background: The nonunion rate for atypical femoral fractures (AFF) is known to be higher than that for typical fractures of the femur. We performed a meta-analysis to determine the incidence of nonunion necessitating reoperation following fixation for AFF and compare the rates according to the fracture site (subtrochanter or midshaft). Methods: A total of 742 AFFs from 29 studies were included. A proportion meta-analysis utilizing a random-effects model was conducted to estimate the prevalence of nonunion. The outcomes were the incidence of reoperations that included osteosynthesis. To determine the association of nonunion with patient mean age or average duration of bisphosphonate use, meta-regression analysis was done. Results: In proportion meta-analysis, the estimated pooled prevalence of nonunion was 7% (95% confidence interval [CI], 5%-10%) from all studies. There was a significant difference in nonunion rate between the 2 groups (I2 = 34.4%, p = 0.02); the estimated prevalence of nonunion was 15% (95% CI, 10%-20%) in subtrochanteric AFFs and 4% (95% CI, 2%-6%) in midshaft AFFs. From meta-regression analysis, significant correlations were identified between nonunion rate and patient mean age (coefficient: -0.0071, p = 0.010), but not in the average duration of bisphosphonate use (coefficient: -0.0024, p = 0.744). Conclusions: A notable disparity existed in the nonunion rate among subtrochanteric AFFs and midshaft AFFs group. Therefore, it is critical for orthopedic surgeons to consider the complexity and challenges associated with AFF and to estimate the proper possibility of nonunion according to the fracture site.

Current Concepts in Management of Distal Femur Fractures.

Recent studies report the overall incidence of distal femur fractures as 8.7/100,000/year. This incidence is expected to rise with high energy motor vehicle collisions and elderly osteoporotic fractures in native and prosthetic knees keep increasing. These fractures are more common in males in the younger age spectrum while females predominate for elderly osteoporotic fractures. Surgical treatment is recommended for these fractures to maintain articular congruity, enable early joint motion and assisted ambulation. Over the last two decades, development of minimally invasive and quadriceps sparing surgical approaches, availability of angle stable implants have helped achieve predictable healing and early return to function in these patients. Currently, laterally positioned locked plate is the implant of choice across all fracture patterns. Retrograde with capital implantation of intramedullary nails with provision for multiplanar distal locking is preferred for extra-articular and partial articular fractures. Even with these advancements, nonunion after distal femur fracture fixation can be as high as 19%. Further recent research has helped us understand the biomechanical limitations and healing problems with lateral locked plate fixation and intramedullary nails. This has lead to development of more robust constructs such as nail-plate and double plate constructs aiming for improved construct strength and to minimise failures. Early results with these combination constructs have shown promise in high risk situations such as fractures with extensive metaphyseal fragmentation, osteoporosis and periprosthetic fractures. These constructs however, run the risk of being over stiff and can inhibit healing if not kept balanced. The ideal stiffness that is needed for fracture healing is not clearly known and current research in this domain has lead to the development of smart implants which are expected to evolve and may help improve clinical results in future.

Evaluation of chronic perilunate dislocations: A comparative study of single-stage, two-stage ORIF, and salvage procedures.

OBJECTIVE: This study aims to evaluate the outcomes of open reduction and internal fixation (ORIF) for chronic perilunate dislocations using single-stage, two-stage, and salvage procedures. The study also compares these approaches with each other and with results from existing literature. METHODS: A total of 15 patients with chronic perilunate injuries from 2013 to 2019 were included in the study. Pre-operative and post-operative assessments were conducted using plain radiographs, with CT scans performed selectively for detailed morphology and fracture pattern analysis. Among the patients, 13 underwent ORIF, while 2 underwent salvage procedures. Among the ORIF cases, single-stage procedures were performed in 4 patients, and two-stage procedures in 9 patients. External fixators, including unilateral uniplanar external fixators (UUEF) and bilateral uniplanar external fixators (BUEF), were applied in 5 and 4 patients, respectively. Our methodology of treating chronic perilunate injuries has evolved over the years. We started with single stage ORIF then graduated to a two staged procedure initially using a external fixator as a carpal distractor applied only on the radial side and finally settling down with bilateral carpal distraction using external fixators both on the radial and ulnar sides. RESULTS: Among the 15 patients, 3 were lost to follow-up. Of these, one underwent four-corner fusion, while the remaining two had UUEF. The mean time interval between injury and surgery was 3.60 months. The post-operative mean scapholunate angle measured 52.46°, with a negative radio-lunate angle (indicating flexion) observed in two patients, while others showed a positive angle (indicating extension). Two cases exhibited nonunion and avascular necrosis (AVN) of the scaphoid, while one case presented with lunate AVN. Mid-carpal and radio-carpal arthritis was observed in 4 and 2 patients, respectively. Functional outcomes were evaluated using Mayo's wrist score categorized as good for two-stage BUEF cases and satisfactory for UUEF and single-stage procedures. CONCLUSION: Staged reduction utilizing the BUEF followed by open reduction has demonstrated superior outcomes when compared to UUEF, single-stage open reduction and salvage procedures. LEVEL OF EVIDENCE: 4.

Clinical and radiological outcomes of ankle joint preserving surgical reconstruction for talar neck non-unions-A series of 8 cases.

BACKGROUND: Talar neck non-unions result in significant hindfoot deformity and morbidity and are infrequently reported in the literature. The optimal surgical management for this condition is evolving, with various authors reporting the results of open reduction and internal fixation (ORIF) with bone grafting (BG), ankle fusion and modified Blair fusion. We performed this study to report the clinical and radiological outcomes of a cohort of talar neck non-unions managed by ankle joint preserving reconstruction. METHODS: This was an ambispective study which included 8 patients (7 male and 1 female) with talar neck non-unions. All patients underwent ORIF+BG through dual approaches. Additional medial malleolar osteotomy was done in 2 cases, and calcaneofibular split approach to the subtalar joint in 3. Adjunct subtalar fusion was done in 5 cases. Clinical and radiological evaluation was performed pre- and post-operatively. Functional outcomes were assessed by the Manchester Oxford Foot Questionnaire (MOxFQ). RESULTS: The mean age of patients 32.3 ± 13.1 years. The mean surgical delay was 4.1 ± 1.7 months. As per Zwipp and Rammelt classification of post-traumatic talar deformities, 5 cases were classified as Type 3, 2 were Type 4, and 1 was Type 1. Union was achieved in 7 cases at a mean of 3.4 ± 1.3 months. One case had progressive collapse, which was managed by pantalar arthrodesis. All 3 cases where subtalar fusion was not performed primarily demonstrated subtalar arthrosis, but none required a secondary subtalar fusion. The MOxFQ score from 61.1 ± 10.1 to 41 ± 14.1 postoperatively (P = 0.005). The mean follow-up was 14.6 ± 6.8 months. CONCLUSION: ORIF+BG of the talar neck, with or without subtalar fusion has the potential to achieve solid union, correct the hindfoot deformity and improve functional outcomes. However, larger studies with longer follow-up are needed to evaluate the long-term efficacy of this procedure.

Pilot study of three novel implants-GSK triangular system, locking hip screw and controlled sliding dynamic hip screw, for fixation of fracture of the neck of femur.

BACKGROUND AND OBJECTIVE: Intra capsular fracture of the neck of femur (FNF) treated traditionally with a dynamic hip screw (DHS) or three cancellous screws (3CS) has a high incidence of complications with reoperation rates between 20 % and 45 %. We hypothesized that FNF unites by primary healing. Therefore, intra-operative compression and absolute stability post-operatively until healing are essential. We postulated that FNF requires 2 types of implants- those which provide absolute stability for young patients with good bone stock and another with sliding mechanism for elderly patients with osteoporosis. We developed three novel fixation systems at our research institute in India using a modified DHS. In patients with good bone stock, locking DHS, called LHS and GSK triangular system (GSKT) provided intra-operative compression and absolute stability during the post-operative period. In those with poor bone stock, the controlled sliding DHS (CSDHS)was used as a locking implant might penetrate the hip joint. MATERIALS AND METHOD: 42 patients of FNF <55 years of age were studied. Among 39 patients with good bone stock, LHS was used in five patients and GSKT system was used in 34 patients. CSDHS was used in three patients with poor bone stock or communition. The patients were followed up for a minimum of eight months up to a maximum of two years, with the average follow up duration of 14 months. RESULTS: 32 out of 34 fractures treated by GSKT system united. Five cases managed by LHS and three by CSDHS, all united. The union rate was 95.2 %. Of the two failed cases, one patient had nonunion (NU), the other had deep infection. Avascular necrosis of the head (AVN) was detected in three patients treated with GSKT system in the second year following surgery. Two of them had hip pain while one was asymptomatic. Eight cases of FNF Pauwels type III underwent a primary valgus osteotomy. All of them united without complications. CONCLUSION: In patients with good bone stock, LHS and GSKT system allowed intra-operative compression and absolute post-operative stability without sliding of head fragment as the triangle construct is biomechanically the strongest. When bones are osteoporotic, a CSDHS provided controlled sliding (1 to 5 mm only). This pilot study showed a promising success rate of 95.2 %. We propose that the GSKT system may be used to treat intertrochanteric and other metaphyseal fractures as well. Further biomechanical studies are underway to strenghten the evidence needed for the widespread use of these implants.

[Analysis of the therapeutic effect of trochanteric flip osteotomy combined with Kocher-Langenbeck approach for high acetabular posterior wall fracture].

OBJECTIVE: Evaluation of the clinical efficacy of f trochanteric flip osteotomy combined with Kocher-Langenbeck approach for high acetabular posterior wall fracture. METHODS: Between January 2020 and December 2022, 20 patients with high acetabular posterior wall fractures were retrospectively analyzed, including 12 males and 8 females, aged 18 to 75 years old. They were divided into two groups according to the different surgical methods. Ten patients were treated with greater trochanteric osteotomy combined with Kocher-Langenbeck approach as the observation group, including 5 males and 5 females, aged from 18 to 75 years old. Ten patients were treated with Kocher-Langenbeck approach alone as the control group, including 7 males and 3 females, aged from 18 to 71 years old. Matta reduction criteria were used to evaluate the reduction quality of the two groups, and Harris score was used to compare the hip function of the two groups at the latest follow-up. The operation time, blood loss and postoperative complications of the two groups were analyzed. RESULTS: All patients were followed up for 10 to 24 months. According to the Matta fracture reduction quality evaluation criteria, the observation group achieved anatomical reduction in 6 cases, satisfactory reduction in 3 cases, and unsatisfactory reduction in 1 case, while the control group only achieved anatomical reduction in 3 cases, satisfactory reduction in 3 cases, and unsatisfactory reduction in 4 cases. At the final follow-up, the Harris hip score ranged from 71.4 to 96.6 in the observation group and 65.3 to 94.5 in the control group. According to the results of Harris score. The hip joint function of the observation group was excellent in 6 cases, good in 3 cases, and fair in 1 case. The hip joint function of the control group was excellent in 2 cases, good in 3 cases, fair in 3 cases, and poor in 2 cases. In the observation group, the intraoperative blood loss ranged from 300 to 700 ml, and the operation duration ranged from 120 to 180 min;in the control group, the intraoperative blood loss ranged from 300 to 650 ml, and the operation duration ranged from 100 to 180 min. Complications in the observation group included 1 case of traumatic arthritis and 1 case of heterotopic ossification, while complications in the control group included 3 cases of traumatic arthritis, 3 cases of heterotopic ossification and 1 case of hip abduction weakness. CONCLUSION: Trochanteric flip osteotomy combined with the Kocher-Langenbeck approach significantly improved anatomical fracture reduction rates, enhanced excellent and good hip joint function outcomes, and reduced surgical complication incidence compared to the Kocher-Langenbeck approach alone. Clinical application of this combined approach is promising, although larger studies are needed for further validation.

Finite element analysis of fixation stability according to reduction position for internal fixation of intertrochanteric fractures.

In recent years, finite element analysis (FEA) has been instrumental in comparing the biomechanical stability of various implants for femur fracture treatment and in studying the advantages and disadvantages of different surgical techniques. This analysis has proven helpful for enhancing clinical treatment outcomes. Therefore, this study aimed to numerically analyze fixed stability according to location using FEA. In this study, a virtual finite element model was created based on a clinically anatomically reduced patient. It incorporated positive and negative support derived from intramedullary and extramedullary reduction from the anteroposterior (AP) view and neutral support from the lateral view. The generated model was analyzed to understand the biomechanical behavior occurring in each region under applied physiological loads. The simulation results of this study showed that the average von Mises stress (AVMS) of the nail when performing intramedullary reduction for femoral fixation was 187% of the anatomical reduction and 171% of the extramedullary reduction, and individually up to 2.5 times higher. In other words, intramedullary reduction had a very high possibility of fixation failure compared to other reduction methods. This risk is amplified significantly, especially in situations where bone strength is compromised due to factors such as old age or osteoporosis, which substantially affects the stability of fixation. Extramedullary reduction, when appropriately positioned, demonstrates greater stability than anatomical reduction. It exhibits stable fixation even in scenarios with diminished bone strength. In instances in which the bone density was low in the support position, as observed in the lateral view, the AVMS on the nail appeared to be relatively low, particularly in cases of positive support. Additionally, the femur experienced lower equivalent stress only in the extramedullary reduction-negative position. Moreover, by comparing different reduction methods and bone stiffness values using the same femoral shape, this study offers insights into the selection of appropriate reduction methods. These insights could significantly inform decision making regarding surgical strategies for intertrochanteric fractures.

Treatment of supracondylar fractures of the humerus in adults using a novel anatomical locking plate on the anterior distal humerus: a case report.

BACKGROUND: Due to its unique anatomical characteristics, supracondylar fractures of the humerus are often difficult to achieve firm fixation with internal fixation equipment, resulting in delayed functional exercise, often leaving cubitus varus deformity, elbow stiffness, contractures, and other complications. Here, we report an adult patient with a supracondylar fracture of the humerus who underwent internal fixation through an anterior median incision in the humerus with our self-developed anterior anatomical locking plate of the distal humerus. CASE PRESENTATION: A 29-year-old male patient of Chinese ethnicity with trauma-induced right supracondylar fracture of the humerus and multiple soft tissue contusions, without nerve damage, blood vessel damage, or other injuries, underwent an internal incision in our hospital using a new anatomical locking plate for the anterior distal humerus fixed treatment. During the 16-month follow-up period, the patient's elbow range of motion was almost completely restored, functional scores were excellent, and there were no minor or major postoperative complications. CONCLUSION: In this study, we propose a surgical reconstruction strategy for adult patients with supracondylar humeral fractures. Through the anterior median incision of the humerus, open reduction and internal fixation were performed with an anatomic locking plate on the anterior side of the distal humerus to restore and fix the structure of the distal humerus, and satisfactory clinical results were achieved in our case.

Pilon fracture with central articular surface collapse treated by posterior tibial fenestration indirect reduction and compression technique: Two cases report.

RATIONALE: Central collapsed fracture blocks traditionally require either an anteromedial or anterolateral approach for reduction. However, existing techniques face challenges such as soft tissue damage and compromised tibial strength, especially in pilon fractures with central articular surface collapse and an intact anterior cortex, as classified under 43B2.3 in the 2018 Orthopaedic Trauma Association/Association for the Study of Internal Fixation Fracture and Dislocation Classification Compendium. PATIENT CONCERNS: We address the management of pilon fractures with central articular surface collapse, focusing on 2 cases where conventional reduction techniques posed a risk to soft tissues and tibial integrity. DIAGNOSES: The patients presented with pilon fractures characterized by a central articular surface collapse and an intact anterior cortex, aligning with the 43B2.3 classification. INTERVENTIONS: A novel approach was employed, utilizing posterior tibial fenestration and indirect reduction with compression techniques. This method leveraged the talus as a template for precise articular surface realignment. OUTCOMES: Both cases demonstrated excellent reduction of the distal tibial articular surface and achieved favorable functional recovery of the ankle, evidenced by high American Orthopedic Foot and Ankle Society Ankle Hindfoot Scale scores during the 3-year follow-up. LESSONS: The posterior tibial fenestration technique offers significant advantages for distal tibial pilon fracture reduction. It allows for precise articular realignment, facilitates bone grafting, and minimizes soft tissue and cortical bone disruption. This method is particularly effective for pilon fractures with an intact anterolateral cortex and central articular collapse, providing a valuable surgical alternative.

Two-screw osteosynthesis is biomechanically superior to single-screw osteosynthesis for type II odontoid fractures.

The data on the use of a one- or two-screw technique (1S, 2S) for ventral osteosynthesis of type II dens fractures are contradictory. The aim was to design an apparatus to mimic the physiological conditions and test stability with 1S, 2S, and a headless compression screw (HCS) for osteosynthesis of artificially created type II odontoid fractures. The apparatus was mounted on a Zwick materials testing machine. A total of 18 C1-2 specimens were stratified into three groups (1S, 2S, HCS). Odontoid fractures were artificially created, and osteosynthesis was performed. Each specimen was tested at loads increasing from 1 to 40 N. Screw loosening was observed visually, by fatigue data, and by a camera tracking system. Analysis of the Zwick data and the camera data revealed a significant higher stability after 2S compared to 1S and HCS treatment (Zwick data: p = 0.021, camera data: p < 0.001), while visible screw loosening showed a superiority of the 2S only over HCS (p = 0.038). The developed apparatus allowed the dynamic study of the atlantoaxial joint with a high approximation to physiological conditions. The results demonstrated superiority of the 2S over the 1S and HCS in biomechanical stability in the treatment of type II odontoid fractures.

Arthroscopic reduction and hollow screw internal fixation for Eyres Type IIIA scapular coracoid fracture: a case report.

BACKGROUND: A coracoid process fracture combined with an acromioclavicular (AC) joint dislocation is an uncommon injury that typically causes significant pain and limits shoulder movement. Open reduction and internal fixation have been the traditional treatment approach. However, arthroscopic techniques are emerging as a promising alternative for managing these injuries. CASE REPRESENTATION: A 35-year-old woman presented with right shoulder pain following an accidental fall. Imaging studies revealed a coracoid process fracture along with an AC joint dislocation. The fracture was classified as an Eyres Type IIIA, which warranted surgical intervention. Our team performed arthroscopic coracoid fracture reduction and internal fixation surgery, as well as AC joint dislocation repair using Kirschner wires. Six months after surgery, the patient demonstrated a satisfactory functional outcome with complete bone healing. CONCLUSION: This case report highlights the potential of arthroscopic reduction and fixation as a novel treatment option for fractures of the coracoid base.

Retrograde tibial intramedullary nail versus minimally invasive locking plate for extra-articular distal tibial fractures: a comparative and retrospective study.

BACKGROUND: Distal tibial fractures represent common lower limb injuries, frequently accompanied by significant soft tissue damage. The optimal surgical approach for managing these fractures remains a topic of considerable debate. The aim of this study was to perform a comparative analysis of the outcomes associated with retrograde intramedullary tibial nails (RTN) and minimally invasive plate osteosynthesis (MIPO) in the context of treating extra-articular distal tibial fractures. METHODS: A retrospective review was conducted on a cohort of 48 patients who sustained extra-articular distal tibial fractures between December 2019 and December 2021. Patients underwent either RTN or MIPO procedures. Various parameters, including operative duration, intraoperative fluoroscopy exposure, time to union, duration until full weight-bearing, American Orthopedic Foot and Ankle Society (AOFAS) scores, and complications, were recorded and compared between the two treatment groups. RESULTS: No statistically significant differences were observed in operative duration, time to union, angulation of the distal tibial coronal plane, or AOFAS scores between the RTN and MIPO groups. However, the RTN group had a higher average number of intraoperative fluoroscopy images (8.2 ± 2.3) compared to the MIPO group (4.1 ± 2.0). The RTN group demonstrated shorter average hospital stays (7.1 ± 1.4 days) and a quicker return to full weight-bearing (9.9 ± 1.3 weeks), which were significantly superior to the MIPO group (9.0 ± 2.0 days and 11.5 ± 1.5 weeks, respectively). In terms of complications, the RTN group had one case of superficial infection, whereas the MIPO group exhibited two cases of delayed union and nonunion, two occurrences of deep infection, and an additional three cases of superficial infection. CONCLUSIONS: Both RTN and MIPO are effective treatment options for extra-articular distal tibial fractures. However, RTN may offer superior outcomes in terms of decreased inpatient needs, faster return to full weight-bearing capacity, and a lower rate of complications.

Monteggia Fracture Dislocation.

SUMMARY: Monteggia fracture is a complex fracture consisting of a proximal ulna fracture with a dislocation of the radial head. This review article highlights the relevant anatomy, clinical evaluation, classification, surgical management, recent innovation, and advancements with treating these injuries. A thorough understanding of these fractures allows for detailed operative plans and reconstitution of normal anatomy.

Distal Radioulnar Joint Instability.

SUMMARY: The distal radioulnar joint (DRUJ) is vital to the stability and function of the wrist and forearm. The osseous morphology is variable and provides little stability. A complex of confluent soft tissues is the primary stabilizer; however, the contribution of each component has yet to be elucidated. It has become increasingly clear that the anatomic fixation of distal radius fractures restores DRUJ stability, obviating the need for additional DRUJ stabilization. This review will describe the anatomy and biomechanics of the DRUJ and discuss injury patterns, treatments, and clinical results.

Complex Fractures of the Radial and Ulnar Shaft.

SUMMARY: Successful management of radial and ulnar shaft fractures is an essential skill for all orthopaedic surgeons. The frequent presentation of these injuries coupled with the nuanced anatomic considerations that must be observed for successful outcomes dictate that these injuries require a thorough understanding by the treating surgeon. Intraoperative care to restore the anatomic radial bow and rotation is essential for the resumption of functional forearm rotation postinjury. Often, problems arising during the operative treatment of radial and ulnar shaft fractures come in predictable patterns that can be mitigated with preoperative planning and sound technique. Cases of increased complexity with segmental bone defects and soft tissue defects require a variety of advanced reconstructive techniques.

Iatrogenic Sciatic Nerve Injury in Posterior Acetabular Surgery: Surgeon More Predictive Than Position.

OBJECTIVES: To identify factors that contribute to iatrogenic sciatic nerve palsy during acetabular surgery through a Kocher-Langenbeck approach and to evaluate if variation among individual surgeons exists. DESIGN: Retrospective cohort. SETTING: Level I trauma center. PATIENT SELECTION CRITERIA: Adults undergoing fixation of acetabular fractures (AO/OTA 62) through a posterior approach by 9 orthopaedic traumatologists between November 2010 and November 2022. OUTCOME MEASURES AND COMPARISONS: The prevalence of iatrogenic sciatic nerve palsy and comparison of the prevalence and risk of palsy between prone and lateral positions before and after adjusting for individual surgeon and the presence of transverse fracture patterns in logistic regression. Comparison of the prevalence of palsy between high-volume (>1 patient/month) and low-volume surgeons. RESULTS: A total of 644 acetabular fractures repaired through a posterior approach were included (median age 39 years, 72% male). Twenty of 644 surgeries (3.1%) resulted in iatrogenic sciatic nerve palsy with no significant difference between the prone (3.1%, 95% confidence interval [CI], 1.9%-4.9%) and lateral (3.3%, 95% CI, 1.3%-8.1%) positions (P = 0.64). Logistic regression adjusting for surgeon and transverse fracture pattern demonstrated no significant effect for positions (odds ratio 1.0, 95% CI, 0.3-3.9). Transverse fracture pattern was associated with increased palsy risk (odds ratio 3.0, 95% CI, 1.1-7.9). Individual surgeon was significantly associated with iatrogenic palsy (P < 0.02). CONCLUSIONS: Surgeon and the presence of a transverse fracture line predicted iatrogenic nerve palsy after a posterior approach to the acetabulum in this single-center cohort. Surgeons should perform the Kocher-Langenbeck approach for acetabular fixation in the position they deem most appropriate, as the position was not associated with the rate of iatrogenic palsy in this series. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.