Medical waste management at three hospitals in Jenin district, Palestine.

Medical wastes are considered hazardous because they may possess infectious agents and can cause unsafe effects on the environment and human health. This study is to analyze and evaluate the current status of medical waste management at Jenin's district in light of medical waste control regulations recommended by the World Health Organization. The results demonstrated that the average hazardous healthcare waste generation rate ranges from 0.54 to 1.82 kg/bed/day with a weighted average of 0.78 kg/bed/day. There was no established waste segregation of healthcare waste types in all hospitals, and these wastes were finally disposed of in a centralized municipal sanitary landfill, namely Zahrat Al-Finjan. The results suggest that there is a need for activation and enforcement of medical waste laws. This can be achieved through cooperation among key actors: Ministry of Health, Environmental Quality Authority, Ministry of Local Government, and Non-Governmental Organizations working in related fields. Additional remediation measures proposed to tackle the problematic areas of medical waste management in Jenin's district hospitals are addressed. Some recommendations to minimize potential health and environmental risks of medical waste are also introduced.

A kick in the butt: time to address tobacco waste in New Zealand.

Tobacco consumption is a significant national public health issue. The waste it generates-tobacco product waste (TPW)-is also an environmental hazard. Targeting TPW through novel policies/regulations-such as a cigarette butt deposit scheme-may serve the dual purposes of reducing an environment nuisance and progressing Aotearoa New Zealand to its goal of being smokefree by 2025.

Incorporating ToxCast and Tox21 datasets to rank biological activity of chemicals at Superfund sites in North Carolina.

BACKGROUND: The Superfund program of the Environmental Protection Agency (EPA) was established in 1980 to address public health concerns posed by toxic substances released into the environment in the United States. Forty-two of the 1328 hazardous waste sites that remain on the Superfund National Priority List are located in the state of North Carolina. METHODS: We set out to develop a database that contained information on both the prevalence and biological activity of chemicals present at Superfund sites in North Carolina. A chemical characterization tool, the Toxicological Priority Index (ToxPi), was used to rank the biological activity of these chemicals based on their predicted bioavailability, documented associations with biological pathways, and activity in in vitro assays of the ToxCast and Tox21 programs. RESULTS: The ten most prevalent chemicals found at North Carolina Superfund sites were chromium, trichloroethene, lead, tetrachloroethene, arsenic, benzene, manganese, 1,2-dichloroethane, nickel, and barium. For all chemicals found at North Carolina Superfund sites, ToxPi analysis was used to rank their biological activity. Through this data integration, residual pesticides and organic solvents were identified to be some of the most highly-ranking predicted bioactive chemicals. This study provides a novel methodology for creating state or regional databases of biological activity of contaminants at Superfund sites. CONCLUSIONS: These data represent a novel integrated profile of the most prevalent chemicals at North Carolina Superfund sites. This information, and the associated methodology, is useful to toxicologists, risk assessors, and the communities living in close proximity to these sites.

The pH-dependent leaching behavior of slags from various stages of a copper smelting process: Environmental implications.

The leaching behaviors of primary copper (Cu) slags originating from Ausmelt, reverbatory, and converter furnaces operating under a single technological process were compared to a residual slag tailing obtained by slag re-processing via flotation and metal recovery. The EN 12457-2 leaching test, used for assessment of the hazardous properties, was followed by the CEN/TS 14997 pH-static leaching test (pH range 3-12). Both leaching experiments were coupled with a mineralogical investigation of the primary and secondary phases as well as geochemical modeling. Metals (Cd, Cu, Pb, Zn) exhibit the highest leaching at low pH. Under acidic conditions (pH 3-6), Ausmelt slag and slag tailing exhibited higher metal leaching compared to other slag types. Very low leaching of metals (far below EU limits for non-hazardous waste) was observed at natural pH (7.9-9.0) for all the studied slag samples. In contrast, relatively high leaching of As was observed over the entire pH range, especially for Ausmelt slag (exceeding the EU limit for hazardous waste by 1.7×). However, geochemical modeling and scanning electron microscopy indicated that formation of stable Ca-Cu-Pb arsenates and the binding of As to newly formed Fe (oxyhydr)oxides play an important role in efficient As immobilization at the slag-water interface. In contrast, no controls were predicted for Sb, whose leaching was almost pH-independent. Nevertheless Sb leached concentrations at natural pH were below EU limit for hazardous waste. Re-processing of primary Cu slags for metal recovery, and subsequent co-disposal of the resulting slag tailing with dolomite-rich mine tailing and local laterite is suitable for stabilizing the remaining contaminants (except Sb) and limiting their leaching into the environment.

Tobacco industry responsibility for butts: a Model Tobacco Waste Act.

Cigarette butts and other postconsumer products from tobacco use are the most common waste elements picked up worldwide each year during environmental cleanups. Under the environmental principle of Extended Producer Responsibility, tobacco product manufacturers may be held responsible for collection, transport, processing and safe disposal of tobacco product waste (TPW). Legislation has been applied to other toxic and hazardous postconsumer waste products such as paints, pesticide containers and unused pharmaceuticals, to reduce, prevent and mitigate their environmental impacts. Additional product stewardship (PS) requirements may be necessary for other stakeholders and beneficiaries of tobacco product sales and use, especially suppliers, retailers and consumers, in order to ensure effective TPW reduction. This report describes how a Model Tobacco Waste Act may be adopted by national and subnational jurisdictions to address the environmental impacts of TPW. Such a law will also reduce tobacco use and its health consequences by raising attention to the environmental hazards of TPW, increasing the price of tobacco products, and reducing the number of tobacco product retailers.

Recovering lead from cupel waste generated in gold analysis by Pb-Fire assay.

Because of its precision and accuracy, Pb-Fire assay is the most employed method for gold analysis in geological materials. At the second stage of the method, namely cupellation, lead is oxidized to PbO which is absorbed by the cupel, leading to metallic gold as a tiny bend at the bottom of the recipient. After cupellation, cupel becomes highly contaminated with lead, making its disposal a serious risk of environmental contamination. In the present work, a leaching process for removing lead from cupel waste is proposed, which allowed for removing 96% of PbO by weight. After a precipitation step, 92.0% of lead was recovered from leachates in the form of PbSO4. Lead in the solid wastes left by the extraction was above the limit established by Brazilian legislation and these were classified as non-hazardous. Finally, secondary effluents generated after the precipitation step presented lead content more than twenty times lower than that of leachates from cupel waste. Tons of cupel waste are annually generated from gold analysis by Pb-Fire assay. Thus, the proposed method can contribute to prevent the discharge of high amounts of lead into the environment. Also, recovery of lead can help to partially meet the industrial demand for lead compounds.

Improvements to enforcement of multilateral environmental agreements to control international shipments of chemicals and wastes.

Illegal trade in hazardous waste and harmful chemicals has caused severe damage on human health and the environment, and brought big challenges to countries to meet their commitments to related multilateral environmental agreements. Synergy-building, like organising law enforcement operations, is critical to address illegal trade in waste and chemicals, and further improve the effectiveness of environmental enforcement. This article discusses how and why law enforcement operations can help countries to implement chemical and waste-related multilateral environmental agreements in a more efficient and effective way. The research explores key barriers and factors for organising law enforcement operations, and recommends methods to improve law enforcement operations to address illegal trade in hazardous waste and harmful chemicals.

Assessment of four calculation methods proposed by the EC for waste hazardous property HP 14 'Ecotoxic'.

Legislation published in December 2014 revised both the List of Waste (LoW) and amended Appendix III of the revised Waste Framework Directive 2008/98/EC; the latter redefined hazardous properties HP 1 to HP 13 and HP 15 but left the assessment of HP 14 unchanged to allow time for the Directorate General of the Environment of the European Commission to complete a study that is examining the impacts of four different calculation methods for the assessment of HP 14. This paper is a contribution to the assessment of the four calculation methods. It also includes the results of a fifth calculation method; referred to as "Method 2 with extended M-factors". Two sets of data were utilised in the assessment; the first (Data Set #1) comprised analytical data for 32 different waste streams (16 hazardous (H), 9 non-hazardous (NH) and 7 mirror entries, as classified by the LoW) while the second data set (Data Set #2), supplied by the eco industries, comprised analytical data for 88 waste streams, all classified as hazardous (H) by the LoW. Two approaches were used to assess the five calculation methods. The first approach assessed the relative ranking of the five calculation methods by the frequency of their classification of waste streams as H. The relative ranking of the five methods (from most severe to less severe) is: Method 3>Method 1>Method 2 with extended M-factors>Method 2>Method 4. This reflects the arithmetic ranking of the concentration limits of each method when assuming M=10, and is independent of the waste streams, or the H/NH/Mirror status of the waste streams. A second approach is the absolute matching or concordance with the LoW. The LoW is taken as a reference method and the H wastes are all supposed to be HP 14. This point is discussed in the paper. The concordance for one calculation method is established by the number of wastes with identical classification by the considered calculation method and the LoW (i.e. H to H, NH to NH). The discordance is established as well, that is when the waste is classified "H" in the LoW and "NH" by calculation (i.e. an under-estimation of the hazard). For Data Set #1, Method 2 with extended M-factors matches best with the LoW (80% concordant H and non-H by LoW, and 13% discordant for H waste by LoW). This method more correctly classifies wastes containing substances with high ecotoxicity. Methods 1 and 3 have nearly as good matches (76% and 72% concordant H and non-H by LoW, and 13% and 6% respectively discordant for H waste by LoW). Method 2 with extended M-factors, but limited to the M-factors published in the CLP has insufficient concordance (64% concordant H and non-H by LoW, and 50% discordant for H waste by LoW). As the same method with extended M-factors gives the best performance, the lower performance is due to the limited set of M-factors in the CLP. Method 4 is divergent (60% concordant H and non-H by LoW, and 56% discordant for H waste by LoW). For Data Set #2, Methods 2 and 4 do not correctly classify 24 air pollution control residues from incineration 19 01 07(∗) (3/24 and 2/24 respectively), and should not be used, while Methods 3, 1 and 2 with extended M-factors successfully classify 100% of them as hazardous. From the two sets of data, Method 2 with extended M-factors (corresponding more closely to the CLP methods used for products) matches best with the LoW when the LoW code is safely known, and Method 3 and 1 will deviate from the LoW if the samples contain substances with high ecotoxicity (in particular PAHs). Methods 2 and 4 are not recommended. Formally, this conclusion depends on the waste streams that are used for the comparison of methods and the relevancy of the classification as hazardous for ecotoxicity in the LoW. Since the set is large (120 waste streams) and no selection has been made here in the available data, the conclusion should be robust.

Hospital effluents management: Chemical, physical, microbiological risks and legislation in different countries.

Hospital wastewater (HWW) can contain hazardous substances, such as pharmaceutical residues, chemical hazardous substances, pathogens and radioisotopes. Due to these substances, hospital wastewater can represent a chemical, biological and physical risk for public and environmental health. In particular, several studies demonstrate that the main effects of these substances can't be neutralised by wastewater treatment plants (WWTPs). These substances can be found in a wide range of concentrations due to the size of a hospital, the bed density, number of inpatients and outpatients, the number and the type of wards, the number and types of services, the country and the season. Some hazardous substances produced in hospital facilities have a regulatory status and are treated like waste and are disposed of accordingly (i.e., dental amalgam and medications). Legislation is quite homogeneous for these substances in all industrial countries. Problems that have emerged in the last decade concern substances and microorganisms that don't have a regulatory status, such as antibiotic residues, drugs and specific pathogens. At a global level, guidelines exist for treatment methods for these effluents, but legislation in all major industrial countries don't contain limitations on these parameters. Therefore, a monitoring system is necessary for these effluents as well as for substances and pathogens, as these elements can represent a risk to the environment and public health.

Environmental requirements related to patient care and the team working to ensure compliance.

Healthcare providers are often surprised that regulations promulgated by the US Environmental Protection Agency (EPA) apply to patient care settings. Many find it strange that processes meant to heal have the potential to harm human health and the environment, and are, therefore, regulated by federal and state environmental agencies. The importance of compliance is emphasized by the fact that both the EPA and individual state agencies have the authority to impose civil and criminal penalties if they discover violations. The Joint Commission considers compliance important enough to include it as an element of performance in the Environment of Care standard.

Environmental pollution from illegal waste disposal and health effects: a review on the "triangle of death".

The term "triangle of death" was used for the first time by Senior and Mazza in the journal The Lancet Oncology referring to the eastern area of the Campania Region (Southern Italy) which has one of the worst records of illegal waste dumping practices. In the past decades, many studies have focused on the potential of illegal waste disposal to cause adverse effects on human health in this area. The great heterogeneity in the findings, and the bias in media communication has generated great healthcare doubts, anxieties and alarm. This paper addresses a review of the up-to-date literature on the "triangle of death", bringing together the available information on the occurrence and severity of health effects related to illegal waste disposal. The Scopus database was searched using the search terms "waste", "Campania", "Naples", "triangle of death" and "human biomonitoring". Despite the methodological and sampling heterogeneity between the studies, this review examines the evidence from published data concerning cancer incidence, childhood mortality and birth defects, so that the current situation, knowledge gaps and research priorities can be established. The review aims to provide a contribution to the scientific community, and to respond to the concerns of the general population.

Household hazardous waste management: a review.

This paper deals with the waste stream of household hazardous waste (HHW) presenting existing management systems, legislation overview and other relevant quantitative and qualitative information. European Union legislation and international management schemes are summarized and presented in a concise manner by the use of diagrams in order to provide crucial information on HHW. Furthermore, sources and types, numerical figures about generation, collection and relevant management costs are within the scope of the present paper. The review shows that the term used to refer to hazardous waste generated in households is not clearly defined in legislation, while there is absence of specific acts regulating the management of HHW. The lack of obligation to segregate HHW from the household waste and the different terminology used makes it difficult to determine the quantities and composition of this waste stream, while its generation amount is relatively small and, therefore, is commonly overlooked in waste statistics. The paper aims to cover the gap in the related literature on a subject that is included within the crucial waste management challenges at world level, considering that HHW can also have impact on other waste streams by altering the redox conditions or causing direct reactions with other non hazardous waste substances.

Utilization of phosphogypsum in tannery sludge stabilization and evaluation of the radiological impact.

The current global trend towards increasingly stringent environmental standards and efforts for efficient utilization and re-use of available by-products and/or wastes, favors the use of low-cost sorbent materials for the treatment of heavy metal-contaminated solid wastes. In this study, the stabilization of tannery sludge, produced from the physicochemical and biological treatment of tannery wastewaters, was examined by the addition of phosphogypsum (PG) at a ratio of 1:1. Characterization of the tannery sludge leachates showed high amounts of chromium which exceeded the acceptable level for disposal in non-hazardous waste landfills, while the dissolved organic carbon (DOC) concentrations exceeded the limits for disposal in landfills for hazardous wastes, according to the EU Decision 2003/33/EC. Leachates of the waste stabilized with PG presented chromium and DOC concentrations below the regulation limits for disposal in landfills for non-hazardous wastes. Moreover, mixing PG with tannery sludge resulted in a stabilized waste with reduced radioactivity.

Federal environmental and occupational toxicology regulations and reporting requirements: a practical approach to what the medical toxicologist needs to know, part 1.

Toxicologists are often called upon to assist in environmental, industrial, occupational and public health assessments. Accordingly, medical toxicologists may find it prudent to be aware of applicable federal toxicological regulations and reporting requirements and of the roles of relevant federal agencies. These regulations are numerous, complex, and have evolved and expanded over time, making it difficult for toxicologists to sustain a current knowledge base. This article reviews the pertinent federal toxicological reporting requirements with regard to the Toxic Substances Control Act (TSCA), the Atomic Energy Act (AEA), the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), the Resource Conservation and Recovery Act (RCRA), the Clean Air Act, the Clean Water Act, the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the Emergency Planning and Community Right to Know Act (EPCRA), the Occupational Safety and Health Act, the Department of Transportation, and information about the National Response Center. We reference internet-based government resources and offer direct links to applicable websites in an attempt to offer rapid and current sources of practical information. The format of the article is a series of hypothetical scenarios followed by commentary. Discussions of the Safe Drinking Water Act, the Food, Drug, and Cosmetic Act, and the Dietary Supplement Health and Education Act are beyond the scope of this paper. For those desiring a more in-depth discussion of the relevant federal environmental laws and statutes and applicable case law, the reader is directed to resources such as the Environmental Law Handbook, the websites of individual laws found at www.epa.gov and the decisions of individual courts of appeal. It is our hope that this article provides not only useful practical information for the practicing toxicologist but also serves as a key reference for medical toxicology core content on environmental laws and regulations.