Impact of scanning strategies on the accuracy of virtual interocclusal records in partially edentulous arch using intraoral scanner: an in vitro study.

PURPOSE: To evaluate the scanning strategies affecting the accuracy of virtual interocclusal records (VIR) in partially edentulous arches using an intraoral scanner in vitro. METHODS: A reference model of a partially edentulous arch with implant analogs in positions 45,46 and 47 was constructed. Six pairs of 1-mm diameter metal beads were placed on the gingival tissue as markers for measurement. Four scanning strategies were tested: Quadrant-arch Scan (group 1), Quadrant-arch Scan with Auxiliary occlusal devices (AOD) (group 2), Full-arch Scan (group 3), Full-arch Scan with AOD (group 4). The model was digitalized with a lab scanner as a reference and 15 scans were obtained for each group. The accuracy of VIR was assessed by comparing the experiment data to the reference digital model. RESULTS: The mean surface deviations of VIR for Groups 1-4 were 89.4 ± 105.2 µm,95.6 ± 132.8 µm,152.3 ± 159.7 µm and 107.6 ± 138.2 µm respectively. Quadrant-arch scans resulted in lower errors of VIR than full-arch scan (P < 0.001). There was a significant interaction between the AOD and scanning span (P = 0.017). The Quadrant-arch scan with AOD　(group 2) produced the least error in the distally extended edentulous area. CONCLUSIONS: Quadrant-arch scans showed better accuracy of VIR than full-arch scans across all tooth positions. The combination of AOD and quadrant-arch scan further enhances VIR accuracy in distally extended edentulous areas.

A new guide for enhancing dental implant placement: an in vitro assessment of accuracy.

This study aimed to design a new surgical guide for controlling the mesiodistal distance between implant osteotomies and adjacent teeth as well as the osteotomy depth in partially edentulous patients. The guide kit was designed with design software and milled with a CNC (computer numerical control) router. The guide consisted of 2 components-stoppers and crown guides-for determining the drilling depth and mesiodistal position, respectively. The stoppers were designed in 7.5-, 9.5-, and 11.5-mm lengths, and the crown guides were fabricated with outer diameters of 5.0, 6.0, 7.0, and 8.0 mm. The accuracy of the guide was assessed by preparing a total of 20 implant osteotomies in 4 partially edentulous models and comparing the dimensions of the actual osteotomies to the values that were predicted to occur with the use of the surgical guides. Osteotomies were prepared using the 7.5-mm stopper with either the 7.0- or 8.0-mm crown guide. Cone beam computed tomography (CBCT) was used to obtain images for analysis of osteotomy-tooth mesiodistal distances, which were predicted to be 3.0 or 5.5 mm, depending on position; interosteotomy mesiodistal distances, which were predicted to be 3.0 mm; and osteotomy depth, which was predicted to be 11.5 mm. A 1-sample t test was used to determine if there were significant differences between the predicted values and the measurements of the guided osteotomies on the CBCT images of the mandibular models, and an independent t test was conducted to compare the results of 3.0- and 5.5-mm osteotomy-tooth distances (α = 0.05). Differences between the predicted and actual values of the interosteotomy mesiodistal distance (P = 0.516) and osteotomy depth (P = 0.847) were not statistically significant. The actual osteotomy-tooth mesiodistal distances were significantly different from the predicted values of 3.0 (P = 0.000) and 5.5 mm (P = 0.001), with higher mean differences of 0.46 and 0.60 mm, respectively. The designed guide had a high accuracy in achieving optimal linear interosteotomy mesiodistal distances and osteotomy depths, and the obtained mean values were clinically acceptable.

Do intraoral scanning technologies affect the trueness of dental arches with crowding, diastema, and edentulous spaces? A clinical perspective.

OBJECTIVES: To evaluate the trueness of dental arches digitised by two intraoral scanning (IOS) technologies from patients presenting crowding, diastema, and bilateral posterior edentulous space with tilted molar. METHODS: Conventional impressions and dental stone models were generated from three patients presenting the aforementioned dental arch conditions. These models were digitised on a desktop scanner, and the resulting mesh was used as reference. Subsequently, the patients were scanned using confocal based (CF; iTero Element 2) and blue laser-multiscan (BLM; Virtuo Vivo) imaging IOS technology, totalling thirty scans. The meshes from the scans were exported in Standard Tessellation Language format and analysed using Geomagic Control X software. Root mean square (RMS) indicated deviation magnitude. Differences in IOS technologies were evaluated with paired t-tests, and dental arch conditions compared using ANOVA and post-hoc Tukey tests (α=0.05). RESULTS: Digital dental arch from blue laser-multiscan technology showed lower trueness compared to confocal based technology for crowding (p = 0.0084) and edentulous spaces (p = 0.0025) conditions. When the types of oral condition were compared, discrepancies were significantly different for both IOS technologies, featuring the arch with diastema showing the lowest trueness, followed by edentulous spaces and crowding. CONCLUSION: Dental arches presenting crowding and edentulous spaces digitised by blue laser-multiscan technology exhibited greater discrepancies compared to confocal based imaging technology. Furthermore, trueness varied among the dental arch conditions. CLINICAL SIGNIFICANCE: The IOS technology and patient's dental arch condition can influence the trueness of dental arch digitisation. Being aware of these effects allows clinicians to take them into account during scanning procedures, digital planning and manufacturing.

Associations between the keratinized mucosa width and the underlying alveolar bone dimensions at partial edentulous molar sites: a retrospective cross-sectional study.

BACKGROUND: The assessment of hard and soft tissue at edentulous sites is important for subsequent implant treatment design. The aim of the present study was to explore the associations between the keratinized mucosa width (KMW) and the underlying alveolar bone dimensions at partial edentulous molar sites. METHODS: In this retrospective study, a total of 110 patients with at least one missing molar were selected. The buccal KMW of the edentulous molar sites was evaluated. Cone-beam computed tomography scans were collected, and the height discrepancy between the alveolar crest and the buccal bone plate (HC-B) as well as the alveolar bone height (ABH) were measured. The KMW was compared among the HC-B and ABH groups at both maxillary and mandibular sites. Linear regression and generalized estimation equations (GEEs) were used to explore the associations between the KMW and alveolar bone dimensions at α = 0.05. RESULTS: Among the 110 patients, 158 edentulous molar sites were analyzed. The average HC-B and ABH were significantly lower at the maxillary sites (1.26 ± 1.62 mm, 11.62 ± 3.94 mm) than at the mandibular sites (3.67 ± 2.85 mm, 14.91 ± 3.01 mm, p < 0.001). The KMW was significantly lower at sites with HC-B > 2 mm than at sites with HC-B ≤ 2 mm both in the maxilla and mandible (p < 0.001). No significant differences were found between the KMW at sites with ABH < 10 mm and sites with ABH ≥ 10 mm (p > 0.05). Linear regression and GEEs analyses revealed that the HC-B was significantly associated with the KMW (B = -0.339, p < 0.001), while the association between the KMW and the ABH was not statistically significant (B = -0.046, p = 0.352). CONCLUSIONS: The buccal KMW at edentulous molar sites was significantly associated with the HC-B. Alveolar ridges presenting with a sloped configuration were more prone to possess a narrower band of keratinized mucosa. Both hard and soft tissue augmentation should be considered for implant treatment at these sites. The correlations of dynamic changes between the KMW and alveolar bone dimensions after tooth extraction should be further investigated.

Accuracy of computer-guided implant surgery in partially edentulous patients: a prospective observational study.

PURPOSE: This study aims to evaluate the amount of distortion using computer-guided implant surgery with 3D printed surgical guides in limited edentulous spaces. MATERIALS AND METHODS: 25 bone level self-tapping implants (Straumann® BL and BLT) were randomly inserted in either distal or intercalary posterior mandibular edentulism using a fully digital protocol and 3D printed surgical guides. Amount of inaccuracy was evaluated after superimposing the 3 coordinates of virtually planned and final implant images, which were obtained using intra-oral scans and scan bodies. Four evaluation parameters were considered: origo-displacement, error depth, apical displacement and angle between the planned and the placed implant. RESULTS: The average of distortion was 0.71 mm for the origo-displacement, 0.36 mm for the error depth, 0.52 mm for the horizontal displacement and 3.34º for the error angle. CONCLUSION: The major reason of exclusion was CBCT artifacts. Results of this study were aligned with the results of previous studies concerning partially edentulous spaces. CAD/CAM manufacturing process did not result in significant distortion whilst the biggest part of distortions originated from the surgical process. The learning curve in computer-guided implant surgery presented an important source of inaccuracy.

Intraoral ultrasonography image registration for evaluation of partial edentulous ridge: A methodology and validation study.

OBJECTIVES: Ultrasound (US) reveals details for diagnosing soft- and hard-tissue dimensions around teeth, implants, and the edentulous ridge, not seen in 2D radiographs. Co-registering free-hand US scans with other 3D modalities presents reliability challenges. This study first aims to develop and validate a registration method to longitudinally reproduce US images of the jawbone on a simulator. In addition, it also evaluates the degree of the anatomical match in humans between US images acquired by the proposed registration method and the commonly used freehand acquisitions in comparison to cone beam computed tomography (CBCT) and intra-oral optical scan (IOS), used as references. METHODS: A previously introduced ultrasound phantom was employed as a CBCT-US hybrid, suitable for training and technique development of US guides in edentulous ridges. After establishing feasibility in the phantom, the methodology was validated in a cohort of 24 human subjects (26 cases). Soft tissues were delineated on US and IOS, and hard tissues on US and CBCT. US accuracy and repeatability from both guided and freehand scans (non-guided) was assessed as the average distance between US and the references. RESULTS: Guided US images resembled the references more closely than freehand (non-guided) scans. Notably, delineation of soft and hard tissues was significantly more accurate when employing guides. In the phantom, guided scans exhibited an absolute mean deviation of 81.8 µm for gingiva and 90.4 µm for bone, whereas non-guided scans showed deviations of 150.4 µm and 177.2 µm, respectively. Similarly, in vivo, guided US outperformed non-guided US, with gingiva deviations of 125 µm and 196 µm, and bone deviations of 354 µm and 554 µm, respectively. CONCLUSIONS: By using a registration method, guided US scans improved repeatability and accuracy of mapping hard and soft tissue of the edentulous ridge when compared to non-guided scans. CLINICAL RELEVANCE: This guided US imaging method could lay the foundation for longitudinal evaluation of tissue behavior and dimensional changes with improved accuracy.

Progressive bone loss and bleeding on probing: A cohort study.

AIM: To investigate whether a progressive marginal bone loss (PMBL) occurring beyond the initial bone remodeling (IBR) is linked with bleeding on probing. MATERIALS AND METHODS: A total of 70 partially edentulous patients exhibiting 112 two-piece bone-level implants were included in this retrospective study. Panoramic radiographs were obtained after implant insertion (T0), after delivery of a final prosthetic restoration (T1) and subsequently during the 1-(T2), 5-(T3), 10-(T4), and 15-years (T5) follow-up visits. At each time point, radiographic marginal bone levels were assessed from the implant shoulder to the first bone-to-implant contact at mesial and distal aspects. The IBR was defined as a bone loss occurring up to prosthesis delivery, that is, from T0 to T1. The PMBL was defined as bone loss occurring after T1. At T2, T3, T4, and T5, the presence or absence of bleeding on probing (BOP) was recorded at four sites. A median regression with mixed models was performed to assess the difference of PMBL in PMBL + BOP+ and PBML + BOP- groups. RESULTS: Over the mean implant functioning time of 4.44 ± 4.91 years, 38 (34%) implants showed no PBML, whereas 74 (66%) implants featured PMBL. Of these, 35 (47%) and 39 (53%) implants were assigned to the PMBL + BOP- and PMBL + BOP+ groups, respectively. The mean PMBL after 1, 5, 10, and 15 years were comparable between implants featuring PMBL with or without BOP. At 1 year, BOP intensity significantly correlated PMBL, with each increase in one BOP-positive site being associated with increase in PMBL by 0.55 mm (p = 0.038), whereas this association was not found at 5, 10, and 15 years. The IBR values in the no PBML, PMBL + BOP+, and PBML + BOP- groups were -0.24 ± 0.31, -0.41 ± 0.59, and -0.24 ± 0.33 mm, respectively, with no significant differences found among the groups. CONCLUSION: Progressive bone loss at implant sites is not always linked with bleeding on probing.

Clinical and radiographic performance of late placed and early loaded dental implants with a conditioned hydrophilic surface in posterior mandible sites: A prospective case series with an 8.5- to 9.5-year follow-up.

OBJECTIVE: To assess the clinical outcomes by means of implant and prosthetic survival of late placed and early loaded implants with a hydrophilic, moderately rough surface for partially edentulous patients after a follow-up of 8.5 to 9.5 years. MATERIALS AND METHODS: A prospective case series study involving 15 patients with single, late placed and early loaded implants in the posterior mandible was performed. Clinical and radiographical parameters, including biological and technical complications and patient satisfaction, were assessed. RESULTS: From an initial sample of 15 patients, 12 were included. A total of 16 implants were observed. After a mean follow-up of 9 years and 7 months (SD ± 3.8 months), implant success and survival rate were 100%. The prosthetic survival rate was 100%, and the prosthetic success rate was 93.8% since a major chipping was observed. No biological complications were observed, and the mean modified plaque index was 0.03 (SD ± 0.09) with a mean probing pocket depth of 2.95 mm (SD ± 0.09). A mean marginal bone level (MBL) of 0.04 mm (SD ± 0.88) and a mean VAS of 9.42 (SD ± 0.90) for patient satisfaction were recorded. CONCLUSION: Late placed and early loaded implants with a moderately rough endosseal surface are a reliable option for rehabilitating partially edentulous patients. An implant survival rate of 100% and a prosthodontic success rate of 93.8% were observed. Patient satisfaction scores were high and peri-implant hard and soft tissues remained healthy. The study findings should be carefully interpreted because of the small sample.

Radiographic evaluation of the distance between the restoration margin and the alveolar bone crest in dental implant patients: A retrospective study.

OBJECTIVES: The recently introduced Implant Disease Risk Assessment (IDRA) identifies a restoration margin-alveolar bone crest (RM-AC) distance of less than 1.5 mm as a key risk factor for peri­implant disease among eight major risk factors. This study evaluated the impact of the RM-AC distance on marginal bone loss (MBL) through radiographic analysis. METHODS: This retrospective cross-sectional study included 77 partially edentulous patients (39 females and 38 males, aged 22 to 76 years) with 202 platform-switched conical connection implants, cement-retained, implant-supported fixed restorations, and bone-level implants placed between 2016 and 2021. Dental implants were followed for least 6 to 36 months at follow up functional loading. Study participants were categorized into Group A (RM-AC distance ≤ 1.5 mm, n = 69) and Group B (RM-AC distance > 1.5 mm, n = 133). Twelve patients in Group B and five patients in Group A had no history of periodontal disease. The MBL was measured radiographically from the most coronal point of the implant shoulder to the alveolar bone, and the RM-AC distance was measured from the restoration margin to the alveolar crest. Multinomial logistic regression analysis was used for statistical evaluation. RESULTS: The incidence of MBL in Group A was statistically significant and 3.42 times higher than that in Group B. The rate of MBL in periodontitis Stage 4 was found to be 26.31 times higher than that in periodontitis Stage 2. The incidence of MBL was 6.097 and 5.02 times higher with increasing implant diameter and length, respectively. CONCLUSION: This study conclusively demonstrates that RM-AC distance ≤ 1.5 significantly increases the risk of MBL, particularly in patients with a history of periodontal disease. CLINICAL SIGNIFICANCE: This study highlights the critical role of maintaining an RM-AC distance greater than 1.5 mm in the prevention of MBL, particularly in patients with a history of periodontal disease. Since implant diameter and length have a significant impact on the risk of MBL, it emphasizes that implant demographics should also be carefully evaluated.

A deep learning approach for dental implant planning in cone-beam computed tomography images.

BACKGROUND: The aim of this study was to evaluate the success of the artificial intelligence (AI) system in implant planning using three-dimensional cone-beam computed tomography (CBCT) images. METHODS: Seventy-five CBCT images were included in this study. In these images, bone height and thickness in 508 regions where implants were required were measured by a human observer with manual assessment method using InvivoDental 6.0 (Anatomage Inc. San Jose, CA, USA). Also, canals/sinuses/fossae associated with alveolar bones and missing tooth regions were detected. Following, all evaluations were repeated using the deep convolutional neural network (Diagnocat, Inc., San Francisco, USA) The jaws were separated as mandible/maxilla and each jaw was grouped as anterior/premolar/molar teeth region. The data obtained from manual assessment and AI methods were compared using Bland-Altman analysis and Wilcoxon signed rank test. RESULTS: In the bone height measurements, there were no statistically significant differences between AI and manual measurements in the premolar region of mandible and the premolar and molar regions of the maxilla (p > 0.05). In the bone thickness measurements, there were statistically significant differences between AI and manual measurements in all regions of maxilla and mandible (p < 0.001). Also, the percentage of right detection was 72.2% for canals, 66.4% for sinuses/fossae and 95.3% for missing tooth regions. CONCLUSIONS: Development of AI systems and their using in future for implant planning will both facilitate the work of physicians and will be a support mechanism in implantology practice to physicians.

Implant-to-root dimensions projected by panoramic radiographs inthe maxillary canine-premolar region: implications for dental implant treatment.

BACKGOUND: This study aimed to compare panoramic radiography (PAN) and cone beam computed tomography (CBCT) determinations of implant-to-root dimensions (IRD) in anterior and posterior maxillary regions, and to help determine in which instances increased radiation exposure from CBCT scans may be justified. METHODS: IRD measured by PAN (PAN-D) from implant-to-root sites (central incisor, lateral incisor, canine, first premolar, and second premolar) was collected from 418 implant sites in 110 adults. The CBCT technique was used as the reference method for the estimation of IRD. The PAN analysis equations were developed using stepwise multiple regression analysis and the Bland-Altman approach was applied to assess the agreement between PAN and CBCT methods. RESULTS: The odds ratio that an implant at the canine-to-first premolar (9.7:1) (P = 0.000) or at the first premolar-to-second premolar region (4.5:1) (P = 0.000) belongs to the underestimation group was strong and highly significant. The root mean square error (RMSE) and pure error (PE) were highest for the canine-to-first premolar (RMSE = 0.886 mm, PE = 0.45 mm) and the first premolar-to-second premolar region (4.5:1) (RMSE = 0.944 mm, PE = 0.38 mm). CONCLUSIONS: This study provides evidence of site-specific underestimations of available horizontal bone dimensions for implants when assessed by PAN. These data suggest that the canines and first and second premolars may have to be excluded when assessing root angulations via PAN.

Radiographic evaluation of bone density in dentulous and edentulous patients in Riyadh, KSA.

BACKGROUND: The Cone Beam Computed Tomography (CBCT) is currently being used as the most common diagnostic method to evaluate the bone density of the maxilla and the mandible for planning dental implant. Aim: The aim of the study is to check the quantitative alveolar bone density in complete or partial edentulous and dentulous male and female patients among Riyadh sample population in Saudi Arabia. MATERIALS AND METHODS: The study involved a cross-sectional analysis of 231 consecutive CBCT images of 231 different patients (115 males and 116 females). The scans were of Saudi National patients who were partially or completely edentulous without any bone infections in the maxilla and the mandible. The findings are presented as descriptive statistics and inferential statistics: student -t-test for two group means, ANOVA for three groups, Post-hoc LSD test for multiple comparisons, Levene statistics for testing the homogeneity of variances and a statistical significance at 5% level. RESULTS: Comparison of mean alveolar bone density in maxillae of dentulous male smokers showed a statistically significant difference for bucco-cortical plate and cancellous bone among different regions. In dentulous male nonsmokers, no significant difference was observed for maxillary regions, while in mandibular areas, a statistically significant difference was seen for buccal cortex, palatal cortex, and cancellous bone among different regions. While studying the scans of female dentulous patients, a statistically significant difference was observed in alveolar bone density for all the areas. CONCLUSION: Evaluation of bone density is an important step in treatment planning and this study was aimed to provide insight into bone density patterns of population in Riyadh, Saudi Arabia. Further similar studies in different populations can help in planning for more efficient treatment outcomes.

Undesirable course of an oral implant rehabilitation in a patient with a long history of bulimia nervosa: case report and review of the literature.

BACKGROUND: Bulimia nervosa is an eating disorder resulting in an intended weight loss due to decreased food intake, induced vomiting, or hyperactivity, and is observed frequently between 12 and 25 years of age. One of the complications is early tooth loss. Moreover, since bulimia nervosa patients suffer from increased atrophy of the alveolar processes, oral rehabilitation even with short dental implants may be impossible. In these cases, lateralization or transposition of the inferior alveolar nerve (IAN) followed by implant placement can be useful. CASE PRESENTATION: A 40-year-old woman with a long-lasting history of bulimia nervosa requested a fixed rehabilitation of her partially edentulous mandible. In 2012, a bilateral IAN transposition approach was performed using piezosurgery, and without any postoperative neurosensory alterations. Two years later, bilateral insertion of each two implants was followed by an inflammatory destabilization of the lower left mandible; subsequent to the implant removal, a fracture occurred, and the latter was stabilized by osteosynthesis plates. In 2017, three additional implants were placed, finally providing the patient with a fixed restoration on five implants. CONCLUSION: Eating disorders may have a tremendous impact on both physical condition and oral health, resulting in early tooth loss and severe bone atrophy. IAN transposition is a viable treatment option to enable installing fixed prostheses via dental implants, but the latter will clearly increase the risk of inflammation and interruption of mandibular continuity. Close clinical and radiologic monitoring is mandatory to adequately respond to complications such as peri-implant mucositis, peri-implantitis, osteomyelitis, or concomitant fractures.

Comparing 4-mm dental implants to longer implants placed in augmented bones in the atrophic posterior mandibles: One-year results of a randomized controlled trial.

BACKGROUND: Short implants have been proposed as an alternative for the rehabilitation of atrophic edentulous areas. PURPOSE: To evaluate the efficacy of 4-mm implants vs longer implants in the atrophic posterior mandibles. MATERIALS AND METHODS: Eleven patients with bilateral atrophic mandibles were rehabilitated with two to four 4-mm implants and 10 or 8-mm long implants in augmented bone using Guided Bone Regeneration procedure. One side of the mandibles was randomly allocated to vertical augmentation with mixed autogenous bone and allograft. Implants were placed in both sides of the mandible after 6 months, and loaded after another 2 months. Subsequently, implant and prosthesis failures, marginal bone levels changes, and any complication were evaluated after 1-year follow-up. RESULTS: In this study, one patient dropped out and no failures occurred. However, 4-mm implants loss of 0.30 ± 0.34 mm peri-implant marginal bone and long implants loss of 0.47 ± 0.54 mm marginal bone were observed after 1-year of follow-up. The difference between the two groups was not statistically significant (difference = -0.16 ± 0.68 mm; P = 0.46). Eight complications occurred in five augmented sites of the patients, and no complication was found to occur in the short implants sites. CONCLUSIONS: One-year after loading, 4-mm implants had similar outcomes as long implants in augmented bone. Therefore, short implants might be a feasible treatment in atrophic mandibles.

Alveolar ridge dimensions in mandibular posterior regions: a retrospective comparative study of dentate and edentulous sites using computerized tomography data.

PURPOSE: To evaluate ridge dimensions at edentulous, mandibular posterior sites, and contralateral dentate sites. METHODS: Computerized tomography scans of 24 patients with one fully edentulous and one fully dentate mandibular posterior region were retrospectively selected. Relative ridge position (rRP), bone height (BH), alveolar canal height (ACH), basal bone height (BBH), and bone width (BW) at 1, 3, and 5 mm apically to the most coronal point of the alveolar crest (BW1mm, BW3mm, and BW5mm, respectively) were measured at posterior dentate sites and contralateral edentulous sites. The proportion of edentulous sites with BH ≥ 9 mm and BW1mm ≥ 6 mm and/or BH ≥ 11 mm and BW3mm ≥ 6 mm was calculated. RESULTS: When compared to dentate sites, edentulous sites showed lower BH, a more apical position of the ridge, lower BW1mm, lower ACH, and similar BBH. The difference in rRP, BH, ACH, BBH, BW1mm, BW3mm, and BW5mm between edentulous and contralateral dentate sites was not significantly different between females and males. The prevalence of edentulous sites with BH ≥ 9 mm and BW1mm ≥ 6 mm and/or BH ≥ 11 mm and BW3mm ≥ 6 mm was higher in females (83.3%) compared to males (58.3%) at second premolar, while was higher in males compared to females at the first molar (83.3 vs 66.6%) and second molar (83.3 vs 75.0%). CONCLUSIONS: In the posterior mandible, edentulous sites show a reduced height and bucco-lingual ridge width compared to contralateral dentate sites. Gender seems to have a limited impact on the extent of ridge resorption following the loss of posterior mandibular teeth.

Influence of the abutment height and connection timing in early peri-implant marginal bone changes: A prospective randomized clinical trial.

AIM: The aim of this study was to compare the influence of the abutment height and insertion timing on early marginal bone loss (MBL) in posterior mandibular partial implant-supported restorations. MATERIAL AND METHODS: The study was planned as a prospective, randomized, controlled parallel group including subjects in need of at least two implants for the restoration of an edentulous posterior mandibular area. The patients were allocated into Groups A (implants immediately connected to 2-mm height abutments), B (immediately connected 1-mm height abutments), and C (2-mm abutments were inserted in a second-stage surgery). Each subject was placed in a 1-year follow-up program, including examination assessment of various soft tissue and bone-level parameters. RESULTS: A total of thirty-three patients, including sixty-eight implants, were enrolled in this study. One implant was lost on group C after the first month of healing. A mean MBL change of 0.719 ± 0.361, 0.651 ± 0.379, and 0.754 ± 0.672 mm was computed for groups A, B, and C, respectively, with no significant differences found. The early MBL at T1 was an independent predictor variable for the marginal bone alterations that were assessed at T3 (p < 0.001). CONCLUSION: The first-month MBL variation is a predictor factor of the bone alterations that might occur after 1 year of treatment. The early connection of final prosthetic abutments with distinct heights does not seem to reduce the 1-year MBL rate when compared with traditional treatment protocols.

Marginal bone level and survival of short and standard-length implants after 3 years: An Open Multi-Center Randomized Controlled Clinical Trial.

OBJECTIVES: The present multi-center randomized controlled clinical trial sought to compare the marginal bone level (MBL) changes and survival of 6- and 11-mm implants. MATERIAL AND METHODS: Ninety-five patients receiving a total of 209 dental implants were enrolled. Subjects were randomly allocated to two cohorts: test (4.0 × 6 mm; N = 108) or control (4.0 × 11 mm; N = 101) implant groups. To be randomized, all edentulous sites were anatomically qualified to receive 11 mm implant. Two to three implants were placed in maxillary or mandibular posterior regions and loaded with splinted provisional restoration after 6 weeks and definitive restoration 6 months thereafter. Test and control implants were followed by clinical and radiographic examinations on an annual basis up to 3 years. RESULTS: Radiographic assessment of MBL 3 years after loading revealed the bone to be located at 0.27 mm (±0.40) and 0.44 mm (±0.74) apical to the implant platform in the test and control groups, respectively. During the 3 years of follow-up since loading, 0.04 mm (±0.43) MBL gain and 0.02 mm (±0.76) of MBL loss were observed in the 6-mm (test) and 11-mm (control) groups, respectively. The MBL's for test and control were significantly different (p = 0.000) in favor of short implants. The cumulative survival rates from placement after 3 years were 96% and 99% for the 6- and 11-mm implants, respectively, with no statistical significance. CONCLUSIONS: Reconstruction of partially edentulous posterior maxilla or mandible with 6- or 11-mm implants led to stable marginal bone level and high implant survival rate after 3 years.

New classification of maxillary sinus contours and its relation to sinus floor elevation surgery.

BACKGROUND: It is complicated to select an appropriate sinus floor elevation and the procedure for sinus floor elevation lacks of consensus. Sinus contour plays an important role in choosing a surgery approach. But there are still no published articles revealing the influence of sinus contours to sinus floor elevation surgery. PURPOSE: We propose a new classification depending on sinus contours from cone-beam computed tomography (CBCT), analyze clinical characters of different types, and investigate the relationship between sinus contours and sinus floor elevation. MATERIALS AND METHODS: We divide sinus into five categories: narrow tapered, tapering, ovoid, square, and irregular. For the first four types, subtypes are classified into three categories: without recess, with buccal-sinus-recess (BSR), and with palate-nasal-recess (PNR). For irregular type, subtypes are classified into three categories: tooth protruding into sinus floor, irregular floor, and septa/exostosis on sinus floor. Then the distribution features of sinuses of 698 patients are described. Sinus widths are measured at second premolar, first and second molar on both sides, and are compared among different types and subtypes. RESULTS: Narrow tapered sinus occupies 88% at second premolar sites, while tapered sinus occupies almost 50% at first and second molar sites. At second premolar and first molar sites, 62% are without recess types. While 92% are without recess types at second molar. Sinuses with BSR present in only three of 3765 sites. There is an increasing trend of sinus width from narrow tapered to irregular type. Sinus width of the group with recesses is significantly higher than the one without recess. At the end, we provide corresponding treatment recommendations for each sinus types and subtypes. CONCLUSION: This is the first classification system that gives treatment recommendations for sinus floor elevation surgery based on sinus contours. The classification system is consistent, easy to visualize, and practicable.

Crestal Bone Level Around Tissue-Level Implants Restored with Platform Matching and Bone-Level Implants Restored with Platform Switching: A 5-Year Randomized Controlled Trial.

PURPOSE: The aim of this randomized clinical trial with a 5-year follow-up was to assess the differences in radiographic levels of peri-implant bone crest between tissue-level implants restored with platform matching (control group) and bone-level implants restored with platform switching (test group) in the posterior region. MATERIALS AND METHODS: To assess marginal bone level changes, periapical radiographs were taken at the moment of prosthesis delivery (baseline), at 1 year, and at 5 years after the definitive restoration. RESULTS: One hundred subjects, partially edentulous in the posterior region, were selected for this study. There were 54 men and 46 women between the ages of 25 and 70 years (mean = 50.5 years). A total of 202 implants were assigned to both groups using a randomized procedure (100 implants in the control group and 102 in the test group). The mean marginal bone level (MBL) changes for tissue-level implants restored with platform matching were 0.26 ± 0.55 mm at baseline to 1 year, 0.34 ± 0.54 mm at 1 year to 5 years, and 0.61 ± 0.73 mm at baseline to 5 years. The mean MBL changes for bone-level implants restored with platform switching were -0.03 ± 0.74 mm at baseline to 1 year, -0.17 ± 0.67 mm at 1 year to 5 years, and -0.20 ± 0.75 mm at baseline to 5 years. The mean difference between the two groups was 0.31 mm at baseline to 1 year, 0.53 mm at 1 year to 5 years, and 0.85 mm at baseline to 5 years. There was a statistically significant difference in MBL (P < .001). Both implant systems showed good and similar survival rates (98% for tissue-level implants restored with platform matching and 96.1% for bone-level implants restored with platform switching). CONCLUSION: In this randomized controlled trial, the following observations were made. Radiographic levels of peri-implant bone crest in tissue-level implants restored by platform matching were statistically significant in the three interval times. Meanwhile, MBL changes for bone-level implants restored with platform switching were not statistically significant in the different times studied. Nevertheless, the mean difference between the two groups was statistically significant.

Association Between Missing Posterior Teeth and Occurrence of Temporomandibular Joint Condylar Erosion: A Cone Beam Computed Tomography Study.

PURPOSE: To determine a possible association between asymptomatic temporomandibular joint (TMJ) condylar erosion and the number of missing posterior teeth and their location, as well as the number of dental quadrants with missing posterior teeth. MATERIALS AND METHODS: This case-control study involved 210 patients (male to female ratio = 98:112) aged 16-74 years, with 105 asymptomatic patients with TMJ condylar erosion and a control group of 105 patients without TMJ condylar erosion. Cone beam computed tomography images were evaluated to classify the severity of TMJ condylar erosion as grade 0 (absence of erosion), grade I (slight erosion), grade II (moderate erosion), or grade III (extensive erosion). RESULTS: The number of missing posterior teeth (mean ± standard deviation [SD]; 2.7 ± 2.4 vs 0.7 ± 1.2) (P < .001), number of dental quadrants with missing posterior teeth (1.5 ± 1.3 vs 0.6 ± 0.9) (P < .001), and bilateral location of missing posterior teeth (41 ± 39.0 vs 10 ± 9.5) (P < .001) were all significantly higher in patients with erosion than in those without erosion. The condylar erosion grade was significantly associated with the number of missing posterior teeth (odds ratio [OR] = 1.24; P = .006), the number of dental quadrants with missing posterior teeth (OR = 1.36; P = .006), and the bilateral occurrence of missing posterior teeth (OR = 3.03; P = .002). CONCLUSION: The findings from this study suggest a possible association between TMJ condylar erosion grades and the number of missing posterior teeth, the number of quadrants with missing posterior teeth, and the bilateral occurrence of missing posterior teeth.