Experimental and Machine-Learning-Assisted Design of Pharmaceutically Acceptable Deep Eutectic Solvents for the Solubility Improvement of Non-Selective COX Inhibitors Ibuprofen and Ketoprofen.

Deep eutectic solvents (DESs) are commonly used in pharmaceutical applications as excellent solubilizers of active substances. This study investigated the tuning of ibuprofen and ketoprofen solubility utilizing DESs containing choline chloride or betaine as hydrogen bond acceptors and various polyols (ethylene glycol, diethylene glycol, triethylene glycol, glycerol, 1,2-propanediol, 1,3-butanediol) as hydrogen bond donors. Experimental solubility data were collected for all DES systems. A machine learning model was developed using COSMO-RS molecular descriptors to predict solubility. All studied DESs exhibited a cosolvency effect, increasing drug solubility at modest concentrations of water. The model accurately predicted solubility for ibuprofen, ketoprofen, and related analogs (flurbiprofen, felbinac, phenylacetic acid, diphenylacetic acid). A machine learning approach utilizing COSMO-RS descriptors enables the rational design and solubility prediction of DES formulations for improved pharmaceutical applications.

A new biphenol-dipicolylamine based ligand and its dinuclear Zn2+ complex as fluorescent sensors for ibuprofen and ketoprofen in aqueous solution.

In this work, the study of the new ligand 3,3'-bis[N,N-bis(pyridine-2-ylmethyl)aminomethyl]-2,2'-dihydroxybiphenyl (L) is reported, where a central 2,2'-biphenol (BPH) fluorophore was functionalized at 3,3'-positions with two dipicolylamine (DPA) side arms as receptor units. Following the synthesis and full chemical-physical characterization, the acid-base and Zn2+-coordination abilities of L were investigated through a combination of potentiometric, UV-Vis, fluorescence, NMR, XRD and DFT measurements. The optical properties of the ligand turned out to be strongly dependent on the pH, being straightforwardly associated with the protonation state of the BPH moiety, whereas its peculiar design allowed to form stable mono and dinuclear Zn2+ complexes. In the latter species, the presence of two Zn2+ ions coordinatively unsaturated and placed at close distance to each other, prompted us to test their usefulness as metallo-receptors for two environmental pollutants of great relevance, ibuprofen and ketoprofen. Potentiometric and fluorescence investigations evidenced that these important non-steroidal anti-inflammatory drugs (NSAIDs) are effectively coordinated by the metallo-receptors and, of relevance, both the stability and the fluorescence properties of the resulting ternary adducts are markedly affected by the different chemical architectures of the two substrates. This study aims at highlighting the promising perspectives arising from the use of polyamino phenolic ligands as chemosensors for H+/Zn2+ and other additional anionic targets in their metal-complexed forms.

Role for Carboxylic Acid Moiety in NSAIDs: Favoring the Binding at Site II of Bovine Serum Albumin.

The molecular structures of nonsteroidal anti-inflammatory drugs (NSAIDs) vary, but most contain a carboxylic acid functional group (RCOOH). This functional group is known to be related to the mechanism of cyclooxygenase inhibition and also causes side effects, such as gastrointestinal bleeding. This study proposes a new role for RCOOH in NSAIDs: facilitating the interaction at the binding site II of serum albumins. We used bovine serum albumin (BSA) as a model to investigate the interactions with ligands at site II. Using dansyl-proline (DP) as a fluorescent site II marker, we demonstrated that only negatively charged NSAIDs such as ibuprofen (IBP), naproxen (NPX), diflunisal (DFS), and ketoprofen (KTP) can efficiently displace DP from the albumin binding site. We confirmed the importance of RCOO by neutralizing IBP and NPX through esterification, which reduced the displacement of DP. The competition was also monitored by stopped-flow experiments. While IBP and NPX displaced DP in less than 1 s, the ester derivatives were ineffective. We also observed a higher affinity of negatively charged NSAIDs using DFS as a probe and ultrafiltration experiments. Molecular docking simulations showed an essential salt bridge between the positively charged residues Arg409 and Lys413 with RCOO-, consistent with the experimental findings. We performed a ligand dissociation pathway and corresponding energy analysis by applying molecular dynamics. The dissociation of NPX showed a higher free energy barrier than its ester. Apart from BSA, we conducted some experimental studies with human serum albumin, and similar results were obtained, suggesting a general effect for other mammalian serum albumins. Our findings support that the RCOOH moiety affects not only the mechanism of action and side effects but also the pharmacokinetics of NSAIDs.

Carrageenan-xanthan nanocomposite film with improved bioadhesion and permeation profile in human skin: A cutaneous-friendly platform for ketoprofen local delivery.

Ketoprofen (KET), commonly used for inflammation in clinical settings, leads to systemic adverse effects with prolonged use, mitigated by topical administration. Nanotechnology-based cutaneous forms, like films, may enhance KET efficacy. Therefore, this study aimed to prepare and characterize films containing KET nanoemulsions (F-NK) regarding mechanical properties, chemical composition and interactions, occlusive potential, bioadhesion, drug permeation in human skin, and safety. The films were prepared using a κ-carrageenan and xanthan gum blend (2 % w/w, ratio 3: 1) plasticized with glycerol through the solvent casting method. Non-nanoemulsioned KET films (F-K) were prepared for comparative purposes. F-NK was flexible and hydrophilic, exhibited higher drug content and better uniformity (94.40 ± 3.61 %), maintained the NK droplet size (157 ± 12 nm), and was thinner and lighter than the F-K. This film also showed increased tensile strength and Young's modulus values, enhanced bioadhesion and occlusive potential, and resulted in more of the drug in the human skin layers. Data also suggested that nano-based formulations are homogeneous and more stable than F-KET. Hemolysis and chorioallantoic membrane tests suggested the formulations' safety. Thus, the nano-based film is suitable for cutaneous KET delivery, which may improve the drug's efficacy in managing inflammatory conditions.

Evaluation of the in vitro human skin percutaneous absorption of ketoprofen in topical anhydrous and aqueous gels.

BACKGROUND: Ketoprofen is a nonsteroidal anti-inflammatory drug used for the treatment of acute and chronic pain associated with inflammatory conditions. This study aims to evaluate the in vitro percutaneous absorption of ketoprofen 10% formulated in proprietary anhydrous and aqueous gels using the Franz skin finite dose model. MATERIALS AND METHODS: The anhydrous gel was initially characterized for cytotoxicity using EpiDerm skin tissue model by cell proliferation assay and Western blot analysis. The Ultra Performance Liquid Chromatography method for measuring ketoprofen was validated and the stability of ketoprofen 10% in the anhydrous gel formulation was evaluated at 5°C and 25°C for 181 days. The percutaneous absorption of ketoprofen was determined using donated human skin. The tissue sections were mounted within Franz diffusion cells. A variable finite dose of each ketoprofen formulation in either anhydrous or aqueous gel was applied to the skin sections and receptor solutions were collected at various time points. RESULTS: Cell proliferation assay showed minimal cell death when EpiDerm skin tissue was exposed to the anhydrous gel for 24 h; the levels of protein markers of cell proliferation were not affected after 17-h exposure. Ketoprofen was stable in the anhydrous gel when stored at 5°C and 25°C. When compounded in the anhydrous and aqueous gels, ketoprofen had mean flux rate of 2.22 and 2.50 µg/cm2 /h, respectively, after 48 h. The drug was distributed to the epidermis and dermis sections of the skin. Both the anhydrous and aqueous gels facilitated the percutaneous absorption of ketoprofen without statistically significant differences. CONCLUSION: The anhydrous gel can be used as a base to facilitate the transdermal delivery of ketoprofen. Although the anhydrous and aqueous gels can deliver a similar amount of ketoprofen, the anhydrous gel (water activity below 0.6) allows for extended default beyond-use-date of compounding preparations.

Eutectic phase transition during tablet manufacture: effect of melting point of eutectic forming drug.

The aim was to investigate eutectic transition during tableting and storage. Mixtures of lidocaine and series of NSAIDs with increasing melting point were used as model systems to guide formulators to scaleup eutectic forming materials gaining enhanced dissolution while avoiding deleterious physical changes. Physical mixtures of NSAIDs with lidocaine were prepared at eutectic forming ratio. These were directly compressed, dry co-ground before compression, or compressed after wet granulation. Dissolution of tablets was compared to corresponding dry co-ground mixture. Thermograms of direct compressed tablet were compared to co-ground mixture and pure compound. Stability of direct compressed tablets was assessed. Tableting initiated eutexia which enhanced dissolution of NSAIDs. Eutexia was associated with tablet softening in case of low melting point ketoprofen and aceclofenac. Wet granulation hastened eutexia developing unacceptable tablet in case ketoprofen and aceclofenac. Tablets prepared by direct compression of physical mixtures underwent gradual eutectic transition upon storage with the magnitude of eutectic transition reducing with increased melting point of NSAIDs. Ketoprofen was physically unstable but aceclofenac degraded chemically as well. Tenoxicam and meloxicam tablets were physically and chemically stable. Direct compression after physical mixing is the best tableting technique, but low melting point drugs should consider different strategy before compression.

Interpreting permeability as a function of free drug fraction: The case studies of cyclodextrins and liposomes.

In order to solubilize poorly soluble active pharmaceutical ingredients, various strategies have been implemented over the years, including the use of nanocarriers, such as cyclodextrins and liposomes. However, improving a drug's apparent solubility does not always translate to enhanced bioavailability. This work aimed to investigate to which extent complexation with cyclodextrins and incorporation into liposomes influence drug in vitro permeability and to find a mechanistic description of the permeation process. For this purpose, we investigated hydroxypropyl-ß-cyclodextrin (HP-ß-CD) and phosphatidylcholine liposomes formulations of three chemically diverse compounds (atenolol, ketoprofen and hydrocortisone). We studied drug diffusion of the formulations by UV-localized spectroscopy and advanced data fitting to extract parameters such as diffusivity and bound-/free drug fractions. We then correlated this information with in vitro drug permeability obtained with the novel PermeaPadⓇ barrier. The results showed that increased concentration of HP-ß-CD leads to increased solubilization of the poorly soluble unionized ketoprofen, as well as hydrocortisone. However, this net increment of apparent solubility was not proportional to the increased flux measured. On the other hand, normalising the flux over the empirical free drug concentration, i.e., the free fraction, gave a meaningful absolute permeability coefficient. The results achieved for the liposomal formulation were consistent with the finding on cyclodextrins. In conclusion, we proved the adequacy and usefulness of our method for calculating free drug fractions in the examined enabling formulations, supporting the validity of the established drug diffusion/permeation theory that the unbounded drug fraction is the main driver for drug permeation across a membrane.

Design and Development of Functionalized Single-walled Carbon Nanotube-ethosomes for Transdermal Delivery of Ketoprofen.

The purpose of this study was to combine carbon nanotube with ethosomes in order to obtain hybrid nanocarriers for transdermal delivery of ketoprofen (KP). KP-loaded functionalized single-walled carbon nanotube (f-SWCNTs) composite ethosomes (f-SWCNTs-KP-ES) were designed and were verified by a series of characterizations. The particle size of the preparation is less than 400 nm. DSC and XRD experiments showed that KP existed in an amorphous state after it was adsorbed and loaded on f-SWCNTs. TEM experiments showed that the structure of SWCNTs remained intact after oxidation and modification by PEI. FTIR results showed that PEI were successfully modified on the surface of SWCNT-COOH, and KP was successfully loaded on f-SWCNTs. In vitro release characteristics showed that the preparation had sustained release behavior and conformed to the first-order kinetic equation model. In addition, f-SWCNTs-KP-ES gel were prepared and in vitro skin permeation and in vivo pharmacokinetics were studied. The results showed that f-SWCNTs-KP-ES gel could enhance the skin permeation rate of KP and increase the drug retention of drugs in the skin. The characterization results consistently showed f-SWCNTs is a promising drug carrier. The hybrid nanocarrier prepared by the combination of f-SWCNTs and ethosomes can enhance the transdermal absorption of drugs and improve the bioavailability of drugs, which has a certain significance for the development of advanced hybrid nano-preparations.

Fluorescent sensing of non-steroidal anti-inflammatory drugs naproxen and ketoprofen by dansylated squaramide-based receptors.

Bis-squaramide receptors L1-L4 bearing a dansyl moiety were synthesised and their potential applications as fluorescent probes towards non steroidal anti-inflammatory drugs naproxen and ketoprofen was investigated. A detailed photophysical characterization in CH3CN/DMSO solution (9 : 1 v/v) was conducted and demonstrated that the two macrocyclic receptors L1 and L2 show good sensitivity towards ketoprofen with an ON-OFF fluorescent response, while the two open chain receptors L3 and L4 behave similarly with the three guests considered. DFT theoretical calculations carried out on L2 and L4 as model receptors allowed to propose a possible coordination mode towards the guests. Finally, 1H-NMR spectroscopy in DMSO-d6/0.5% water solution demonstrated that the four receptors interact with the considered guests via H-bonds.

LC-MS/MS approach for simultaneous assessment of hyoscine N-butyl bromide and ketoprofen in biological fluids and pharmaceuticals.

The mixture of hyoscine N-butyl bromide (HBB) and ketoprofen (KTP) is commonly used for the handling of abdominal spasms and pain relief. There are two challenges that restrict the simultaneous assessment of HBB and KTP in biological fluids and pharmaceuticals. The first issue is the difficulty of elution of HBB and the second one is the presence of KTP as a racemic mixture in all pharmaceutical formulations, which obscures its appearance as a single peak. An ultrasensitive and highly efficient liquid chromatography-mass/mass spectrometric (LC-MS/MS) method is designed and validated for the first concurrent assessment of HBB and KTP in spiked human serum and urine, and pharmaceutical formulations. The estimated linearity ranges for HBB and KTP were respectively, 0.5-500 and 0.05-500 ng/ml, with excellent correlation coefficients. Validation results showed that the value of relative standard deviations were <2% for HBB and KTP. The mean extraction recoveries for HBB and KTP were, respectively, 91.04 and 97.83% in Spasmofen® ampoules; 95.89 and 97.00% in spiked serum; and 97.31 and 95.63% in spiked urine. The presented innovative chromatographic approach was utilized for the measurement of trace amounts of coexisting pharmaceuticals in pharmacokinetics studies and routine therapeutic medication monitoring.

New look at the metabolism of nonsteroidal anti-inflammatory drugs: influence on human serum albumin antioxidant activity.

Body's homeostasis is dependent on many factors, such as maintaining balance between free radicals formation and degradation. Human serum albumin (HSA) also plays an important role in homeostasis. The aim of this study was thermodynamic analysis of the interaction between ketoprofen (KET), naproxen (NPX), diclofenac (DIC) and HSA, as well as the effect of drug-albumin binding on HSA antioxidant activity using calorimetric and spectrophotometric techniques. Based on the calorimetric analysis it has been shown that accompanied by hydrophobic interaction drugs-albumin binding is an exoenergetic reaction. All analyzed drugs and HSA showed the ability to react with free radicals such as a radical cation, formed as a result of the reaction between 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) and potassium persulfate (K2S2O8). Using ABTS assay a synergistic effect of ketoprofen (KET) and naproxen (NPX) on HSA antioxidant activity was observed while the effect of diclofenac (DIC) binding with albumin was probably additive. Because some medications including KET, NPX and DIC belong to over the counter (OTC) non-steroidal anti-inflammatory drugs (NSAIDs), it is necessary to understand their influence on HSA antioxidant activity.Communicated by Ramaswamy H. Sarma.

Removal of Non-Steroidal Anti-Inflammatory Drugs from Drinking Water Sources by GO-SWCNT Buckypapers.

Pharmaceutical products such as antibiotics, analgesics, steroids, and non-steroidal anti-inflammatory drugs (NSAIDs) are new emerging pollutants, often present in wastewater, potentially able to contaminate drinking water resources. Adsorption is considered the cheapest and most effective technique for the removal of pollutants from water, and, recently, membranes obtained by wet filtration method of SWCNT aqueous solutions (SWCNT buckypapers, SWCNT BPs) have been proposed as self-standing porous adsorbents. In this paper, the ability of graphene oxide/single-walled carbon nanotube composite membranes (GO-SWCNT BPs) to remove some important NSAIDs, namely Diclofenac, Ketoprofen, and Naproxen, was investigated at different pH conditions (pH 4, 6, and 8), graphene oxide amount (0, 20, 40, 60, and 75 wt.%), and initial NSAIDs concentration (1, 10, and 50 ppm). For the same experimental conditions, the adsorption capacities were found to strongly depend on the graphene oxide content. The best results were obtained for 75 wt.% graphene oxide with an adsorption capacity of 118 ± 2 mg g-1 for Diclofenac, 116 ± 2 mg g-1 for Ketoprofen, and 126 ± 3 mg g-1 for Naproxen at pH 4. Overall, the reported data suggest that GO-SWCNT BPs can represent a promising tool for a cheap and fast removal of NSAIDs from drinking water resources, with easy recovery and reusability features.

One Hundred Carboxylate Receptors.

This work presents a compilation of binding constant (logKass) values in DMSO-d6/H2O (0.5% m/m) for a variety of receptors with 12 carboxylate anions (formate, acetate, lactate, pivalate, sorbate, hexanoate, benzoate, glyphosate, glucuronate, ibuprofen, naproxen, and ketoprofen). A total of 489 logKass values are listed for 100 anion receptor molecules. Most logKass values originate from previously published articles, along with some values for previously unpublished receptor molecules, spanning a workflow of 8 years. The purpose of this study is to serve as a comprehensive information source for selecting suitable receptor candidates to be used in practical carboxylate sensing applications, such as constructing ion-selective electrodes (ISE-s). To support such decision making, all receptors are presented together with lipophilicity (logPo/w) data.

An Evolving Role of Aqueous Piperazine to Improve the Solubility of Non-Steroidal Anti-Inflammatory Drugs.

Piperazine (PIP) is a pharmaceutically acceptable molecule and a good co-conformer in crystallographic engineering. Most of the non-steroidal anti-inflammatory drugs (NSAIDs) have poor aqueous solubility, which hinders their clinical application. The reports show that the solubility of many insoluble drugs can be significantly improved through salt formation with the PIP. In this work, we obtained a series of NSAIDs-PIP salts, such as ibuprofen-piperazine (IBU-0.5PIP) salt, indomethacin-piperazine (IND-0.5PIP) salt, sulindac-piperazine (SUL-0.5PIP) salt, phenylbutazone-piperazine (PBZ-0.5PIP) salt, ketoprofen-piperazine (KPF-0.5PIP) salt and flurbiprofen-piperazine (FLB-0.5PIP) salt. The spatial structure, arrangement, interaction and associations were expatiated by single crystal X-ray diffraction. Powder X-ray diffraction, Fourier transform infrared, differential scanning calorimetry, and thermogravimetric analysis were used to characterize the novel salts. The six new salts had more than 10 folds of solubility and a faster dissolution rate improved corresponding to the bulk drugs in pure water, and the significant improvement of solubility is closely related to the structure of salts.

Disposable stochastic sensors for fast analysis of ibuprofen, ketoprofen, and flurbiprofen in their topical pharmaceutical formulations.

Three disposable stochastic sensors based on maltodextrin (dextrose equivalent = 4-7) and nanostructures (copper monolayer, carbon monolayer and carbon-copper composite layer) deposited using cold plasma on copy paper were proposed for the fast analysis of ibuprofen, ketoprofen and flurbiprofen in pharmaceutical formulation samples. The widest linear concentration ranges recorded were: for ibuprofen 1 fmol/L - 1 mmol/L when the disposable stochastic sensor based on carbon monolayer was used, for ketoprofen 1 fmol/L - 1 mmol/L when the disposable stochastic sensors based on copper monolayer and carbon-copper composite layer were used, and for flurbiprofen 1 fmol/L - 10 mmol/L when the disposable stochastic sensor based on carbon-copper composite layer was used. The lowest limit of detection recorded for each non-steroidal anti-inflammatory drug was 1 fmol/L.

Ionic liquid of ketoprofen-piperine modulates the pharmaceutical and therapeutic characters of ketoprofen.

Efficiency of drug delivery is product of drug properties and formulation design. Modulating drug's unfavorable properties such as poor solubility or permeation is the first step towards optimum delivery. By combining a drug with a selected bulky counter ion, it can be transformed into a low-melting point salt, i.e., an ionic liquid (IL), with favorable physicochemical properties. In this study, we prepared a novel IL of anti-inflammatory drug, ketoprofen (KP), to enable its transdermal administration. KP was paired with piperine (PI) forming equimolar KP-PI IL, via solvent evaporation. KP-PI IL showed extended stability. Thermal analysis and X-ray diffractometry proved that KP was transformed into a low-melting point amorphous form, while spectroscopic analysis and computational studies demonstrated that KP-PI interaction was mediated by hydrogen bonding. In the IL form, KP's solubility increased due to IL formation by 71 to 83%, while 218% more KP was permeated through rat skin in the IL form, than in a KP/PI mixture. Importantly, upon transdermal administration to rats with induced paw edema; KP-PI IL resulted in a 68% less paw swelling than KP/PI mixture. These findings demonstrate the utility of IL as an economic, simple and efficient strategy for improving the therapeutic application of drugs/drug combinations.

Photochemical Reaction of Ketoprofen with Proteinogenic Amino Acids.

Ketoprofen (KP) is one of the most popular nonsteroidal anti-inflammatory drugs; however, drug-induced photosensitivity of KP has been reported as a serious adverse effect. KP incorporated into a protein can produce an allergen under UV irradiation, which causes drug-induced photosensitivity. The photochemistry of KP with 20 kinds of proteinogenic amino acids in phosphate buffer solutions at pH 7.4 was studied by transient absorption spectroscopy. The KP carboxylate anion (KP-) gave rise to a carbanion via a decarboxylation within a laser pulse, and the carbanion yielded 3-ethylbenzophenone ketyl biradical (3-EBPH) through a proton transfer reaction. Twelve kinds of proteinogenic amino acids obviously accelerated the reaction. Structural information on the complexes of KP docked in the binding sites of human serum albumin (HSA) was obtained by molecular mechanics (MM) and molecular dynamics (MD) calculations. The photochemical reaction of KP- with amino acid residues in HSA was discussed on the basis of the experimental and calculational results. The information on the reactivity of KP with the amino acids and the stable structures of the KP-HSA complexes should be essential for understanding of the initial step for drug-induced photosensitivity.

A new case of photoallergic contact dermatitis caused by benzophenones in magazine covers.

BACKGROUND: Allergic contact dermatitis (ACD) and photoallergic contact dermatitis (PACD) to benzophenone present in printing ink have been reported. However, precise chemical analyses and extended photo-patch tests have not been performed in these cases. OBJECTIVES: To determine which components present in a magazine cover are responsible for a patient's skin reaction, to determine the primary sensitizer, and precisely diagnose ACD and PACD. METHODS: After initial photo-patch tests were performed on a patient with a history of reaction to magazine covers after sun exposure, gas chromatography-mass spectrometry and high-performance liquid chromatography analyses of the magazine covers, and additional photo-patch tests were performed. RESULTS: The first photo-patch test results confirmed PACD to ketoprofen and fenofibrate and evoked PACD to the magazine covers. 4-methyl benzophenone (4-MBP) and 1-hydroxy-cyclohexyl-phenyl-ketone (1-HCPK) were found in the magazine cover. Additional photo-patch tests confirmed PACD to 1-HCPK and to benzophenone, and photo-aggravated ACD to 4-MBP. The primary sensitizer was ketoprofen. CONCLUSIONS: Benzophenones are present in a wide variety of products, without always being listed on the packaging. Patients previously sensitized to other ketones, such as ketoprofen, may react to benzophenones without being able to avoid contact with these molecules. New regulations may be needed for more efficient eviction advice.

Ketoprofen-induced Photoallergic Reaction.

Dear Editor, Photoallergic reactions are classic T-cell-mediated or delayed-type hypersensitivity reactions of the skin in response to a photoallergen (or a cross-reacting chemical) to which a subject was sensitized in the past (1). The immune system recognizes the changes caused by ultraviolet (UV) radiation; it produces antibodies and causes inflammation of the skin in the exposed areas (2). Common photoallergic drugs and ingredients are included in some sunscreens, aftershave lotions, antimicrobials (especially sulfonamides), non-steroidal anti-inflammatory drugs (NSAIDs), diuretics, anticonvulsants, chemotherapy drugs, fragrances, and other hygiene products (1,3,4). A 64-year-old female patient was admitted to the Department of Dermatology and Venereology with erythema and underlining edema on her left foot (Figure 1). A few weeks earlier, the patient had had a fracture of the metatarsal bones and since then she had been taking NSAIDs systemically every day to suppress pain. Five days before being admitted to our Department, the patient started applying 2.5% ketoprofen gel to her left foot twice daily and was frequently exposed to the sun. For the last twenty years, the patient had been struggling with chronic back pain and was frequently taking different NSAIDs (ibuprofen, diclofenac, etc.). The patient also suffered from essential hypertension and was regularly taking ramipril. She was advised to discontinue ketoprofen application, avoid sunlight, and apply betamethasone cream twice daily for 7 days, which lead to complete resolution of the skin lesions in a few weeks. Two months later, we performed patch and photopatch tests to baseline series and topical ketoprofen. Only the irradiated side of the body where ketoprofen-containing gel was applied showed positive reaction to ketoprofen. Photoallergic reactions manifest as eczematous, pruritic lesions, which may spread to involve other areas of the skin that were not previously exposed to the sun (4). Ketoprofen is a nonsteroidal anti-inflammatory drug composed of a benzoylphenyl propionic acid that is commonly used both topically and systemically for the treatment of musculoskeletal diseases because of its analgesic and anti-inflammatory effects and low toxicity, but it is one of the most frequent photoallergens (1,5,6). Ketoprofen-induced photosensitivity reactions usually present as photoallergic dermatitis characterized as acute dermatitis with edema, erythema, papulovesicles, blisters, or erythema exsudativum multiforme-like lesions at the application site 1 week to 1 month after the initiation of use (7). Depending on the frequency and intensity of sun exposure, ketoprofen photodermatitis may continue or reoccur up to 1 to 14 years after discontinuing the medication (6,8). Moreover, ketoprofen contaminates clothing, shoes, and bandages, and some cases of photoallergy relapses have been reported that were induced by ketoprofen-contaminated objects after they were used again in the presence of UV radiation (5,6). Due to their similar biochemical structure, patients with ketoprofen photoallergy should avoid using some drugs such as some NSAIDs (suprofen, tiaprofenic acid), antilipidemic agent (fenofibrate) and sunscreens based on benzophenones (6,9). Physicians and pharmacists should advise patients of the potential risks when topical NSAIDs are applied on the photoexposed skin.

Modeling of Adhesion in Tablet Compression at the Molecular Level Using Thermal Analysis and Molecular Simulations.

The molecular basis of adhesion leading to sticking was investigated by exploring the correlation between thermal analysis and molecular simulations. It is hypothesized that intermolecular interactions between a drug molecule and a punch face are the first step in the adhesion process and the rank order of adhesion during tablet compression should correspond to the rank order of the energies of these interactions. In the present study, the sticking propensity was investigated using ibuprofen, flurbiprofen, and ketoprofen as model substances. At the intermolecular level, a thermal analysis model was proposed as an experimental technique to estimate the work of adhesion between ibuprofen, flurbiprofen, and ketoprofen in a DSC aluminum pan. The linear relationship was established between the enthalpy of vaporization and sample mass to demonstrate the accuracy of the instruments used. The threshold mass for ibuprofen, flurbiprofen, and ketoprofen was determined to be 107, 112, and 222 µg, respectively, after three replicate measurements consistent with the experimental results. Ketoprofen showed a 2-fold higher threshold mass compared to ibuprofen and flurbiprofen, which predicts that ketoprofen should have the highest sticking propensity. Computationally, the rank order of the work of adhesion between ibuprofen, flurbiprofen, and ketoprofen with the metal surface was simulated to be -75.91, 44.75, and -96.91 kcal/mol, respectively, using Materials Studio. The rank order of the interaction between the drug molecule and the iron superlattice decreases in the order ketoprofen > ibuprofen > flurbiprofen. The results indicate that the thermal model can be successfully implemented to assess the sticking propensity of a drug at the molecular level. Also, a new molecular simulation script was successfully applied to determine the interaction energy of the drug molecule upon contact with iron.