[Development of Solventless Pharmaceutical Technique for Manufacture of Pharmaceuticals].

The aim of our study was to develop a solventless drug pelletization and polymer coating technique for pharmaceutical manufacturing. This review describes a dry coating technique using a mechanical powder processor and a V-shaped blender to produce coated pellets or tablets by mechanically mixing polymer particles and core materials (such as drug pellets and uncoated tablets) without the need for a solvent. First, aqueous latexes comprising colloidal polymethacrylates and ethylcellulose were solidified by freeze drying to produce polymer particles for the dry coating process. These particles and the cores were then subjected to mechanical powder processing or V-shaped blending to provide coated formulations with controlled-release characteristics. Polymer coating was achieved by using agglomerates comprising assembled colloidal polymer. The agglomerated polymer was easily pulverized during the mixing treatments due to its loose structure (the lack of close contacts between the colloidal particles), and the resulting fine polymer with high adhesiveness was deposited on the cores. Colloidal polymer dispersed in aqueous latex tends to coagulate in the freeze-drying process due to condensation of the dispersion, yielding dense agglomerates with poor coating characteristics. The presence of surfactants (such as sodium lauryl sulfate) in the latex can prevent adhesion between colloidal particles in the freeze-drying process, providing loosely structured agglomerates suitable for dry coating. Dry coating with a V-shaped blender could thus be achieved with these polymer particles instead of having to use a mechanical powder processor.

Clinical breakage, slippage and acceptability of two commercial ultra-thin polyurethane male condoms compared to a commercial thin latex condom: a randomised, masked, 3 way crossover, multi centre controlled study (SAGCS 2).

BACKGROUND: Although natural rubber latex remains dominant as the primary manufacturing material for male condoms synthetic materials first introduced in the early 1990s address many of the limitations of latex including the risk of allergies. Polyurethane elastomers allow condoms to be made significantly thinner to provide greater sensitivity and encourage greater use of condoms for contraception and STI prophylaxis. The primary objective of this Study was to evaluate the breakage, slippage and acceptability of two ultra-thin polyurethane condoms against a thin control latex male condom, designated latex C, in a randomized, cross over, masked, non-inferiority study. The condom designated Polyurethane A was designed for markets where 52/53 mm wide latex condoms are preferred whereas the condom designated Polyurethane B was designed for markets where the smaller 49 mm wide latex condom is preferred. METHODS: The Study was designed to meet the requirements specified in ISO 29943-1: 2017 and FDA guidelines for clinical studies on synthetic condoms. It was conducted by two Essential Access Health centres, one in Northern California and the other in Southern California. Sexually active heterosexual couples (300) aged between 18 and 45 years were recruited to use three sets of five condoms in a block randomized order, recording breakage, slippage and acceptability after each use. A total of 252 couples contributed 2405 evaluable condom uses per protocol for the Condom A versus Latex C comparison (1193 Polyurethane A plus 1212 Latex C), and 247 couples provided 2335 evaluable condom uses per protocol for the Condom B versus Latex C comparison (1142 Polyurethane B plus 1193 Latex C). Only condoms used for vaginal intercourse were included in the analysis. FINDINGS: Although the total failure rates (breakage and slippage) for the polyurethane condoms were higher than for the control Latex C condom, all condoms performed extremely well with low failure rates compared to similar condom studies. Condom Polyurethane A met the noninferiority requirements specified in ISO 23409:2011 relative to Latex C, the control NR latex condom, in the full Study population. While condom Polyurethane B did not meet the noninferiority requirement for the full Study population, it did meet the noninferiority requirement when analysis was restricted to the intended population (men with penis lengths ≤ 170 mm). Trial registration The Study is registered with ClinicalTrials.gov, NCT04622306, Protocol Reference SAGCS 2, initial release date 11/02/2020.

Cationic Polystyrene Latex Nanocarriers for Immunostimulatory Long Double-Stranded RNA Delivery to Ovarian Cancer Cells.

Long double-stranded (ds)RNA, a potent stimulator of type I interferon and the innate immune response. In the present study, we demonstrated, for the first time, the efficacy of cationic polystyrene latex nanostructures (clNPs) as a dsRNA carrier, improving cellular delivery and robustly potentiating the immunostimulatory capacity of dsRNA in the ovarian cancer cell line SKOV3. The clNPs complexed with an in vitro transcribed dsRNA molecule, were bound by SKOV3 cells, and had increased cellular association compared to uncomplexed clNPs. clNPs complexed with dsRNA induced a more robust innate immune response compared to dsRNA alone. Transcript expression of two interferon-stimulated genes, were increased 47- and 108-fold over dsRNA and induced a significant antiviral state against vesicular-stomatitis virus, resulting in a 3.3-fold improvement on the efficacy of dsRNA. These data highlight the potential of polystyrene latex nanostructures as dsRNA carriers for anticancer immunotherapies, improving the uptake and efficacy of the nucleic acid.

Healing of leprosy-associated chronic plantar wounds with a novel biomembrane containing latex proteins from Calotropis procera.

Pre-clinical assays demonstrated that a 1% polyvinyl alcohol biomembrane containing latex proteins (10%) from the medicinal plant Calotropis procera was biocompatible and stimulated healing of incisional and excisional wounds in murine models, and the mechanistic aspects were established. The efficacy of the biomembrane (BioMemCpLP) to promote healing of chronic ulcers in leprosy patients was investigated. The study started with 28 volunteers. Five were excluded later due to different disconformities. Ulcers from 15 patients were continuously treated with BioMemCpLP for 56 days. Five patients were treated only with silver sulfadiazine and three patients received plain hydrocolloid wound dressings with high absorption capacity. In all cases, wound dressings were renewed three times a week for 56 days and ulcers were evaluated weekly for contraction and healing progress. The extent of the healed area in the ulcers treated with BioMemCpLP was greater than in the control groups. Approximately 88% of ulcers treated with BioMemCpLP were fully healed before day 56, against 6% in both control groups. This result was not correlated with age/gender, duration or location of ulcers, deformity or whether or not the patient was cured of leprosy. The results showed that BioMemCpLP was beneficial for treatment of ulcers suffered by leprosy patients without noticeable side effects.

Effect of edaphoclimate on the resin glycoside profile of the ruderal Ipomoea parasitica (Convolvulaceae).

The latex of Ipomoea (Convolvulaceae) is a source of a special kind of acylsugars called resin glycosides, which are highly appreciated because of their biological activities (i.e. laxative, antimicrobial, cytotoxic etc.). Most research has been conducted in perennials with tuberous roots, where resin glycosides are stored. However, their content and variation are unknown in annual vines that lack this type of root, such as in the case of Ipomoea parasitica. This species contains research/biological and human value through its fast growth, survival in harsh environments, and employment in humans for mental/cognitive improvements. These qualities make I. parasitica an ideal system to profile resin glycosides and their variations in response to edaphoclimate. Topsoil samples (0-30 cm depth) and latex from petioles of I. parasitica were collected in two localities of central Mexico. The latex was analyzed through UHPLC-ESI-QTOF, and soil physico-chemical characteristics, the rainfall, minimum, average, and maximum temperatures were recorded. We also measured canopy (%), rockiness (%), and plant cover (%). A Principal Component Analysis was conducted to find associations between edaphoclimate and the resin glycosides. Forty-four resin glycosides were found in the latex of I. parasitica. Ten correlated significantly with three components (47.07%) and contained tetrasaccharide, pentasaccharide, and dimers of tetrasaccharide units. Five resin glycosides were considered constitutive because they were in all the plants. However, exclusive molecules to each locality were also present, which we hypothesize is in response to significant microhabitat conditions found in this study (temperature, clay content, pH, and potassium). Our results showed the presence of resin glycosides in I. parasitica latex and are the basis for experimentally testing the effect of the conditions above on these molecules. However, ecological, molecular, and biochemical factors should be considered in experiments designed to produce these complex molecules.

Structural analysis of a ligand-triggered intermolecular disulfide switch in a major latex protein from opium poppy.

Several proteins from plant pathogenesis-related family 10 (PR10) are highly abundant in the latex of opium poppy and have recently been shown to play diverse and important roles in the biosynthesis of benzylisoquinoline alkaloids (BIAs). The recent determination of the first crystal structures of PR10-10 showed how large conformational changes in a surface loop and adjacent ß-strand are coupled to the binding of BIA compounds to the central hydrophobic binding pocket. A more detailed analysis of these conformational changes is now reported to further clarify how ligand binding is coupled to the formation and cleavage of an intermolecular disulfide bond that is only sterically allowed when the BIA binding pocket is empty. To decouple ligand binding from disulfide-bond formation, each of the two highly conserved cysteine residues (Cys59 and Cys155) in PR10-10 was replaced with serine using site-directed mutagenesis. Crystal structures of the Cys59Ser mutant were determined in the presence of papaverine and in the absence of exogenous BIA compounds. A crystal structure of the Cys155Ser mutant was also determined in the absence of exogenous BIA compounds. All three of these crystal structures reveal conformations similar to that of wild-type PR10-10 with bound BIA compounds. In the absence of exogenous BIA compounds, the Cys59Ser and Cys155Ser mutants appear to bind an unidentified ligand or mixture of ligands that was presumably introduced during expression of the proteins in Escherichia coli. The analysis of conformational changes triggered by the binding of BIA compounds suggests a molecular mechanism coupling ligand binding to the disruption of an intermolecular disulfide bond. This mechanism may be involved in the regulation of biosynthetic reactions in plants and possibly other organisms.

The feasibility of ultrasound-guided latex labeling of the anterolateral ligament in anatomical dissection - A cadaveric study.

BACKGROUND: The present study aims to investigate the feasibility of labeling ligaments using ultrasound-guided injections. On formalin-fixed cadavers, the anterolateral ligament was selected and targeted for demonstration. The development of portable ultrasound machines and the ability to connect them to tablets via Bluetooth or WLAN makes it an accessible tool to implement into the anatomical dissection courses in order to associate medical imaging (MRI and ultrasound), anatomical structures and their subsequent dissection. METHODS: 8 formalin fixed human cadavers were used for the ultrasound-guided injections of 1 mL of blue latex into the anterolateral ligament. 8 cadavers were not injected with latex for comparative purposes. The injections were performed by an experienced ultra-sonographer. After approximately 10 months, five dissections were carried out by students during the dissection course and three specimens were dissected by anatomists. RESULTS: The anterolateral ligament was successfully marked and demonstrated in 7 out of 8 cases. In 4 out of 5 cases, the dissection was primarily conducted by students, while in 3 out of 3 cases, it was performed by anatomists. The accuracy was 80 % and 100 %, respectively. CONCLUSION: The present study demonstrated that labeling obscure ligaments, such as the anterolateral ligament, using ultrasound guidance is feasible on formalin-fixed cadavers. It also showed that students can successfully perform the dissections as the structure is highlighted and that the time between injection and dissection (approximately 10 months) has little impact on the outcome. The use of ultrasound in dissection courses should be further encouraged.

Antivenom potential of the latex of Jatropha mutabilis baill. (Euphorbiaceae) against Tityus stigmurus venom: Evaluating its ability to neutralize toxins and local effects in mice.

ETHNOPHARMACOLOGICAL RELEVANCE: Species of the Jatropha genus (Euphorbiaceae) are used indiscriminately in traditional medicine to treat accidents involving venomous animals. Jatropha mutabilis Baill., popularly known as "pinhão-de-seda," is found in the semi-arid region of Northeastern Brazil. It is widely used as a vermifuge, depurative, laxative, and antivenom. AIM OF THE STUDY: Obtaining the phytochemical profile of the latex of Jatropha mutabilis (JmLa) and evaluate its acute oral toxicity and inhibitory effects against the venom of the scorpion Tityus stigmurus (TstiV). MATERIALS AND METHODS: The latex of J. mutabilis (JmLa) was obtained through in situ incisions in the stem and characterized using HPLC-ESI-QToF-MS. Acute oral toxicity was investigated in mice. The protein profile of T. stigmurus venom was obtained by electrophoresis. The ability of latex to interact with venom components (TstiV) was assessed using SDS-PAGE, UV-Vis scanning spectrum, and the neutralization of fibrinogenolytic and hyaluronidase activities. Additionally, the latex was evaluated in vivo for its ability to inhibit local edematogenic and nociceptive effects induced by the venom. RESULTS: The phytochemical profile of the latex revealed the presence of 75 compounds, including cyclic peptides, glycosides, phenolic compounds, alkaloids, coumarins, and terpenoids, among others. No signs of acute toxicity were observed at a dose of 2000 mg/kg (p.o.). The latex interacted with the protein profile of TstiV, inhibiting the venom's fibrinogenolytic and hyaluronidase activities by 100%. Additionally, the latex was able to mitigate local envenomation effects, reducing nociception by up to 56.5% and edema by up to 50% compared to the negative control group. CONCLUSIONS: The latex of Jatropha mutabilis exhibits a diverse phytochemical composition, containing numerous classes of metabolites. It does not present acute toxic effects in mice and has the ability to inhibit the enzymatic effects of Tityus stigmurus venom in vitro. Additionally, it reduces nociception and edema in vivo. These findings corroborate popular reports regarding the antivenom activity of this plant and indicate that the latex has potential for treating scorpionism.

Testing intra-species variation in allocation to growth and defense in rubber tree (Hevea brasiliensis).

Background: Plants allocate resources to growth, defense, and stress resistance, and resource availability can affect the balance between these allocations. Allocation patterns are well-known to differ among species, but what controls possible intra-specific trade-offs and if variation in growth vs. defense potentially evolves in adaptation to resource availability. Methods: We measured growth and defense in a provenance trial of rubber trees (Hevea brasiliensis) with clones originating from the Amazon basin. To test hypotheses on the allocation to growth vs. defense, we relate biomass growth and latex production to wood and leaf traits, to climate and soil variables from the location of origin, and to the genetic relatedness of the Hevea clones. Results: Contrary to expectations, there was no trade-off between growth and defense, but latex yield and biomass growth were positively correlated, and both increased with tree size. The absence of a trade-off may be attributed to the high resource availability in a plantation, allowing trees to allocate resources to both growth and defense. Growth was weakly correlated with leaf traits, such as leaf mass per area, intrinsic water use efficiency, and leaf nitrogen content, but the relative investment in growth vs. defense was not associated with specific traits or environmental variables. Wood and leaf traits showed clinal correlations to the rainfall and soil variables of the places of origin. These traits exhibited strong phylogenetic signals, highlighting the role of genetic factors in trait variation and adaptation. The study provides insights into the interplay between resource allocation, environmental adaptations, and genetic factors in trees. However, the underlying drivers for the high variation of latex production in one of the commercially most important tree species remains unexplained.

[Investigation of the Biosafety of Commercially Available Natural Rubber Latex and Synthetic Polyurethane Condom Materials]. / å¸‚å”®å¤©ç„¶æ©¡èƒ¶èƒ¶ä¹³å’Œäººå·¥åˆæˆèšæ°¨é ¯æè´¨é¿å­•å¥—çš„ç”Ÿç‰©å®‰å ¨æ€§ç ”ç©¶.

Objective: To investigate the biological safety of commercially available natural rubber latex and synthetic polyurethane condoms. Methods: Natural rubber latex condom brands of A1 and A2 and polyurethane condom brands of B1 and B2 were purchased from large chain pharmacies in Chengdu, with three packages randomly selected for each brand. The study assessed the toxic effects of condom extracts on L-929 mouse fibroblasts according to GB/T standards. Gross observation and histopathological evaluation were conducted to assess the irritation reactions of condoms on the vagina and penis of rabbits (3 rabbits were used for each brand), as well as their sensitization effects on guinea pig skin. Additionally, the impact of continuous perfusion of condom extracts of the vaginas of SD rats for 30 days on their reproductive systems was evaluated, following GB/T standards (5 rats were used for each brand). Results: Extracts from natural rubber latex condom brands A1 and A2, at concentrations of 100% and 50%, exhibited significant cytotoxicity, with optical density (OD) values being significantly lower than those of the blank control group and the polyurethane condom brands B1 and B2 (P<0.01). There was no significant difference in cell morphology and OD values between the extracts of B1 and B2 and the blank control group (P>0.05). Vaginal congestion was found in 3 rabbits from A1 group and 1 rabbit from the A2 group, while no obvious congestion was noted in rabbits from the B1 and the B2 groups. Histopathological examination showed scattered inflammatory cell infiltration in the vaginal tissue of 3 rabbits from the A1 group and 2 rabbits from the A2 group, and slight congestion in the blood vessels of the lamina propria. No obvious pathological changes were observed in the vaginal tissue of polyurethane brand rabbits. Two rabbits from the A1 group and 1 rabbit from the A2 group showed transient and mild erythema on the penis during the experiment. Histopathological examination showed that 1 rabbit from A1 group had small foci of pericapillary lymphocytes in the dermis of the penis, while no significant pathological changes were observed in the penile tissue of A2, B1, and B2 groups. After 30 days of continuous vaginal perfusion with condom extract, 3 rats in A1 group and 2 rats in the A2 group had uterine congestion, with the degree of congestion being lower in the A2 group. No significant congestion or pathological changes were observed in the vaginal and penile tissues of rabbits, or in the uterine tissues of rats from the polyurethane groups. None of the 4 groups of guinea pigs showed significant skin allergic reactions to the condom extracts. Conclusion: Significant differences in biosafety exist among condoms of various materials and brands. To ensure product safety, it is crucial to strengthen quality control and regulatory oversight after condoms become commercially available.

Facile preparation and characterization of biodegradable and biocompatible UV shielding transdermal patches based on natural rubber latex- dextrin blends.

The physico-chemical and biological properties of natural rubber latex (NRL), entailing its biodegradability and biocompatibility, render it a promising material for various biomedical applications. This research explores the facile blending of NRL with dextrin in different compositions to investigate its potential as a prospective UV shielding transdermal patch for biomedical applications. The superior compatibility between the polymers after blending and the improved thermal stability have been established through FTIR, DSC, and TGA examinations, respectively. Optimization of blended polymers for compatibility, wettability, crystallinity, and static mechanical properties has been performed. Morphology characterization conducted via SEM and AFM techniques suggests a uniform morphology for the optimized blend system. The UV shielding ability of the blend has been confirmed by the evaluation of in-vitro UV shielding performance, UV protection factor (UPF), and the superior protection of the optimized system on living cells upon UV irradiation. The observed cell viability, swelling, erosion, porosity, hemocompatibility, and soil degradation properties suggest the NRL-DXT combination for the possible development of high-quality transdermal patches.

[1-7-NαC]-Crocaorb A1 and A2, orbitides from the latex of Croton campanulatus.

Two new heptapeptides, [1-7-NαC]-crocaorbs A1 (1) and A2 (2), were isolated from the latex of Croton campanulatus. Their structures were determined using NMR spectroscopic techniques, ESI-HRMS data, Marfey's method, and further refined using molecular dynamics with simulated annealing (MD/SA). Molecular dynamics calculations of peptides 1 and 2 demonstrated greater stability in simulations using a biological solvent compared to those using DMSO. Compound 1, the most abundant peptide in latex, was assessed for NO production, antiplasmodial and cytotoxicity activities. The peptide significantly increased nitric oxide (NO) production at concentrations of 40, 20 or 10 µM (17.932 ± 1.1, 18.270 ± 0.9, 18.499 ± 0.7, respectively). Its antiplasmodial activity exhibited limited efficacy, with only 5% inhibition of Plasmodium falciparum 3D7 growth at a concentration of 50 µM. Also, it exhibited no cytotoxic effects in the J774A.1 murine macrophages cell line. This study represents the first report of a phytochemical investigation of the species C. campanulatus, which showed orbitides with distinctive sequences in contrast to other peptides described for the genus Croton and contributes to the study of structural diversity within this particular class of compounds.

A single Angiofil-latex injection for both radiological and anatomical assessment of arterial territories in the limbs.

INTRODUCTION: Postmortem evaluation of the human vascular system has a long history, with advancements ranging from dissections to modern imaging techniques like computed tomography (CT scan). This study designs a novel combination of Angiofil, a liquid radiopaque polymer, and latex, a flexible cast material, for cadaveric vascular analysis. MATERIAL & METHODS: The aim was to synergize the advantages of both components, providing accurate radiological images and optimal dissection conditions. Three arterial territories (lateral circumflex femoral artery, profunda brachii artery, and radial artery) were injected and assessed through CT scans and dissections. RESULTS: The Angiofil-latex mixture allowed successful visualization of the vascular networks, offering a simple, reproducible, and non-toxic approach. Quantitative assessments of the three territories, including diameters and lengths, showed comparable results between CT scan and dissection. DISCUSSION: The technique precision and versatility make it an accessible and valuable tool for anatomical studies, potentially extending its application to MRI analyses. Overall, the Angiofil-latex combination presents a cost-effective solution for researchers, offering enhanced visibility and detailed anatomical insights for various applications, including anatomical variation studies.

ECPUB5 Polyubiquitin Gene in Euphorbia characias: Molecular Characterization and Seasonal Expression Analysis.

The spurge Euphorbia characias is known for its latex, which is rich in antioxidant enzymes and anti-phytopathogen molecules. In this study, we identified a novel polyubiquitin protein in the latex and leaves, leading to the first molecular characterization of its coding gene and expressed protein in E. characias. Using consensus-degenerate hybrid oligonucleotide primers (CODEHOP) and rapid amplification of cDNA ends (5'/3'-RACE), we reconstructed the entire open reading frame (ORF) and noncoding regions. Our analysis revealed that the polyubiquitin gene encodes five tandemly repeated sequences, each coding for a ubiquitin monomer with amino acid variations in four of the five repeats. In silico studies have suggested functional differences among monomers. Gene expression peaked during the summer, correlating with high temperatures and suggesting a role in heat stress response. Western blotting confirmed the presence of polyubiquitin in the latex and leaf tissues, indicating active ubiquitination processes. These findings enhance our understanding of polyubiquitin's regulatory mechanisms and functions in E. characias, highlighting its unique structural and functional features.

Development of an experimental technique to determine the barrier performance of medical gloves when stretched.

Protective clothing standards, such as test methods published by ASTM International, play an integral role in ensuring the performance of personal protective equipment. The standard tests are not without limitations and are periodically reviewed and often updated. Some tests may not be reflective of in-use conditions. A new test cell was designed using sanitary fixtures to evaluate the effect of glove stretch on barrier performance using fluorescein solution as the challenge agent for enhanced visualization and fluorometer detection. Domed-shaped and flat screens were developed to permit and limit glove stretch within the test cell. The barrier performance of glove swatches was evaluated for both stretched and unstretched states. Latex, nitrile, and vinyl glove models of various thicknesses were evaluated. The tests were conducted following pressure and time parameters specified in ASTM F903, ASTM F1670, and ASTM F1671. Fluorescein solution movement, which may occur through penetration, was measured using a fluorometer. Glove stretch caused a reduction in glove thickness ranging from 16% to 40%. Overall, 21 sample failures were found (16.7%; n = 126) regardless of test condition. Nitrile gloves provided better barrier efficacy with the lowest failure rates (2.38%; 1 failure out of 42) compared to latex (19.4%; 7 failures out of 36) and vinyl gloves (27.1%; 13 failures out of 48). Differences in failure rates between stretched and unstretched gloves were insignificant; however, the latex material showed a 2.5 times increase in failures when stretched compared to unstretched. The new test apparatus was able to differentiate between the barrier performance of different glove materials. The use of a domed screen allowed the gloves to stretch, a condition that better represents the state of gloves when in use. Analysis of samples collected from the glove surface opposite to the exposure may provide a way to assess chemical permeation in addition to penetration.

Exploring the biofilm inhibitory potential of Candida sp. UFSJ7A glycolipid on siliconized latex catheters.

Biosurfactants, sustainable alternatives to petrochemical surfactants, are gaining attention for their potential in medical applications. This study focuses on producing, purifying, and characterizing a glycolipid biosurfactant from Candida sp. UFSJ7A, particularly for its application in biofilm prevention on siliconized latex catheter surfaces. The glycolipid was extracted and characterized, revealing a critical micellar concentration (CMC) of 0.98 mg/mL, indicating its efficiency at low concentrations. Its composition, confirmed through Fourier transform infrared spectroscopy (FT-IR) and thin layer chromatography (TLC), identified it as an anionic biosurfactant with a significant ionic charge of -14.8 mV. This anionic nature contributes to its biofilm prevention capabilities. The glycolipid showed a high emulsification index (E24) for toluene, gasoline, and soy oil and maintained stability under various pH and temperature conditions. Notably, its anti-adhesion activity against biofilms formed by Escherichia coli, Enterococcus faecalis, and Candida albicans was substantial. When siliconized latex catheter surfaces were preconditioned with 2 mg/mL of the glycolipid, biofilm formation was reduced by up to 97% for E. coli and C. albicans and 57% for E. faecalis. These results are particularly significant when compared to the efficacy of conventional surfactants like SDS, especially for E. coli and C. albicans. This study highlights glycolipids' potential as a biotechnological tool in reducing biofilm-associated infections on medical devices, demonstrating their promising applicability in healthcare settings.

Dual-functional natural rubber latex foam composites for solar-driven clean water production and heavy metal decontamination.

Solar steam generation (SSG) offers a sustainable approach to fresh water production. Herein, a novel dual-functional natural rubber/carbon black composite foam evaporator is presented for a cost-efficient SSG system that both produces fresh water and eliminates heavy metals present in the water. The composite foam is produced using the Dunlop process, and in its optimized form, it absorbed >96 % of sunlight. The foam evaporator exhibited a thermal conductivity of 0.052 W/m⋅K, a water evaporation rate of 1.40 kg/m2/h, converted 83.38 % of light to heat under 1 sun irradiation, and showed outstanding stability. The technology required to produce this composite foam is already available to make large-scale production feasible, while the natural raw materials are abundant. On the basis of its performance qualities, the rubber foam composite appears to be an excellent candidate for application as a viable solar absorber for SSG to produce fresh, clean water for commercial purposes.

BpAFP, a Broussonetia papyrifera latex chitinase, exhibits a dual role in resisting to both Verticillium wilt disease and lepidopterous pests, Plutella xylostella and Prodenia litura.

Paper mulberry (Broussonetia papyrifera) is a fast-growing tree known for its tolerance to diverse biotic and abiotic stresses. To explore genes combating Verticillium wilt, a devasting and formidable disease damage to cotton and many economically significant crops, we purified an antifungal protein, named BpAFP, from the latex of paper mulberry. Based on peptide fingerprint, we cloned the full cDNA sequence of BpAFP and revealed that BpAFP belongs to Class I chitinases, sharing 74 % identity with B. papyrifera leaf chitinase, PMAPII. We further introduced BpAFP into Arabidopsis, tobacco, and cotton. Transgenic plants exhibited significant resistance to Verticillium wilt. Importantly, BpAFP also demonstrated insecticidal activity against herbivorous pests, Plutella xylostella, and Prodenia litura, when feeding the larvae with transgenic leaves. Our finding unveils a dual role of BpAFP in conferring resistance to both plant diseases and lepidopterous pests.

Synergistic Effects of the Superhydrophilic and Superhydrophobic Components on the Antifreezing Performances of Latex Particles and Anti-Icing Properties of Latex Films.

The development of new materials for antifreezing and anti-icing applications is a big challenge in industry and academic area. Inspired by the antifreeze proteins, latex particles with superhydrophilic zwitterionic shells and superhydrophobic cores are synthesized by reversible addition-fragmentation chain transfer emulsion polymerization, and the applications of the latex particles in antifreezing and anti-icing applications are investigated. In antifreezing study, the critical aggregate temperature (CAT) of the latex particles decreases, and the separation of the melting and freezing temperature of ice increases with the particle concentration. Enzyme molecules can be cryopreserved in the particle solution, and their bioactivities are well maintained. Latex particles are casted into latex films with dynamic surfaces. Anti-icing performances, including antifrosting properties, freezing delay time, and ice adhesion strengths, are studied; and the water-treated latex films present stronger anti-icing properties than other films, due to the synergistic effects of the superhydrophilic and superhydrophobic components. In addition, latex particles with zwitterionic shells and poly(n-butyl methacrylate) cores, and latex particles with small molecular surfactant on the surfaces are synthesized. The antifreezing performances of the latex particles and anti-icing properties of the latex films are compared.

Utilizing the Banana S-Adenosyl-L-Homocysteine Hydrolase Allergen to Identify Cross-Reactive IgE in Ryegrass-, Latex-, and Kiwifruit-Allergic Individuals.

Food allergies mediated by specific IgE (sIgE) have a significant socioeconomic impact on society. Evaluating the IgE cross-reactivity between allergens from different allergen sources can enable the better management of these potentially life-threatening adverse reactions to food proteins and enhance food safety. A novel banana fruit allergen, S-adenosyl-L-homocysteine hydrolase (SAHH), has been recently identified and its recombinant homolog was heterologously overproduced in E. coli. In this study, we performed a search in the NCBI (National Center for Biotechnology Information) for SAHH homologs in ryegrass, latex, and kiwifruit, all of which are commonly associated with pollen-latex-fruit syndrome. In addition, Western immunoblot analysis was utilized to identify the cross-reactive IgE to banana SAHH in the sera of patients with a latex allergy, kiwifruit allergy, and ryegrass allergy. ClustalOmega analysis showed more than 92% amino acid sequence identity among the banana SAHH homologs in ryegrass, latex, and kiwifruit. In addition to five B-cell epitopes, in silico analysis predicted eleven T-cell epitopes in banana SAHH, seventeen in kiwifruit SAHH, twelve in ryegrass SAHH, and eight in latex SAHH, which were related to the seven-allele HLA reference set (HLA-DRB1*03:01, HLA-DRB1*07:01, HLA-DRB1*15:01, HLA-DRB3*01:01, HLA-DRB3*02:02, HLA-DRB4*01:01, HLA-DRB5*01:01). Four T-cell epitopes were identical in banana and kiwifruit SAHH (positions 328, 278, 142, 341), as well as banana and ryegrass SAHH (positions 278, 142, 96, and 341). All four SAHHs shared two T-cell epitopes (positions 278 and 341). In line with the high amino acid sequence identity and B-cell epitope homology among the analyzed proteins, the cross-reactive IgE to banana SAHH was detected in three of three latex-allergic patients, five of six ryegrass-allergic patients, and two of three kiwifruit-allergic patients. Although banana SAHH has only been studied in a small group of allergic individuals, it is a novel cross-reactive food allergen that should be considered when testing for pollen-latex-fruit syndrome.