Feeding frequency efficacy on biogas yield of oily substrate anaerobic digestion in continuous stir tank reactor.

Anaerobic treatment of oily substrate, known as grease trap waste (GTW), was investigated for its practicability via continuous stirred tank reactor (CSTR) at different operating conditions and selected recovery strategies of feeding frequency efficacy. This study determine the performance of feeding frequency efficacy, namely feeding every 24 hours (R24H) and feeding every 12 hours (R12H). Under organic loading rate (OLR) of 2.2 gCOD/L.day, R12H exhibited methane composition of 57%, methane production rate of 0.27 LCH4/L.day, and methane yield of 0.14 LCH4/gCODremoved. At the same OLR, R24H recorded methane composition of 60%, methane production rate of 0.29 LCH4/L.day and similar methane yield as R12H. Findings indicated that R24H showed performance comparable to that of R12H. Given minor variation observed in performance, it is recommended that plant operators may consider scheduling two feedings per day for low loading conditions and switch to one feeding per day for higher loading conditions. This strategy is designed to balance the system and prevent shock loads, which could lead to plant shutdowns. This mechanism will induce their conversion to volatile fatty acids (VFAs); thus, reducing the risk of acid accumulation and pH drops, which could inhibit methanogens to produce methane, especially for oily substrate.

Lean methane combustion over zeolite-supported Pd catalysts: Structure-performance relationship and deactivation mechanism.

Zeolites are a promising support for Pd catalysts in lean methane (CH4) combustion. Herein, three types of zeolites (H-MOR, H-ZSM-5 and H-Y) were selected to estimate their structural effects and deactivation mechanisms in CH4 combustion. We show that variations in zeolite structure and surface acidity led to distinct changes in Pd states. Pd/H-MOR with external high-dispersing Pd nanoparticles exhibited the best apparent activity, with activation energy (Ea) at 73 kJ/mol, while Pd/H-ZSM-5 displayed the highest turnover frequency (TOF) at 19.6 × 10-3 sec-1, presumably owing to its large particles with more step sites providing active sites in one particle for CH4 activation. Pd/H-Y with dispersed PdO within pore channels and/or Pd2+ ions on ion-exchange sites yielded the lowest apparent activity and TOF. Furthermore, Pd/H-MOR and Pd/H-ZSM-5 were both stable under a dry condition, but introducing 3 vol.% H2O caused the CH4 conversion rate on Pd/H-MOR drop from 100% to 63% and that on Pd/H-ZSM-5 decreased remarkably from 82% to 36%. The former was shown to originate from zeolite structural dealumination, and the latter principally owed to Pd aggregation and the loss of active PdO.

Enhancing corn stalk-based anaerobic digestion with different types of zero-valent iron added during the acidification stage: Performance and mechanism.

Anaerobic digestion has been defined as a competitive approach to facilitate the recycling of corn stalks. However, few studies have focused on the role of direct interspecies electron transfer (DIET) pathway in the acidification stage under the addition of different particle sizes of zero-valent iron (ZVI). In this study, three types of ZVI, namely iron filings, iron powder and nanoscale iron, were investigated, respectively, to enhance its high-value conversion. Variations in volatile fatty acids (VFAs) and methane (CH4) production associated with the underlying mechanisms were emphatically determined. Results indicated that the addition of ZVI could increase the concentration of VFAs, with the most outstanding performance observed with the use of nanoscale iron. Importantly, the conversion of propionic acid to acetic acid was driven by adding ZVI with no between-group differences in acidizing phase. Conversely, the substrate was more fully utilized when supplied with iron powder compared with other groups in methanogenic phase, thereby displaying the maximum CH4 yield with a value of 263.1 mL/(g total solids (TS)). However, adding nanoscale iron could signally shorten the digestion time (T80), saving 7 days in comparison to the group of iron powder.

Microencapsulation of lemongrass and mangosteen peel as phytogenic compounds to gas kinetics, fermentation, degradability, methane production, and microbial population using in vitro gas technique.

The purpose of the current study was to evaluate the impact of various doses of microencapsulated lemongrass and mangosteen peel (MELM) on gas dynamics, rumen fermentation, degradability, methane production, and microbial population in in vitro gas experiments. With five levels of microencapsulated-phytonutrient supplementation at 0, 1, 2, 3, and 4% of substrate, 0.5 g of roughage, and a concentrate ratio of 60:40, the trial was set up as a completely randomized design. Under investigation, the amount of final asymptotic gas volume was corresponding responded to completely digested substrate (b) increased cubically as a result of the addition of MELM (P < 0.01) and a cubic rise in cumulative gas output. The amount of MELM form did not change the pH and NH3-N concentration of the rumen after 12 and 24 h of incubation. However, methane production during 24 h of incubation, the levels were cubically decreased with further doses of MELM (P < 0.01) at 12 h of incubation. Increasing the dosage of MELM supplementation at 2% DM resulted in a significant increase in the digestibility of in vitro neutral detergent fiber (IVNDF) and in vitro true digestibility (IVTD) at various incubation times (P < 0.05), but decreased above 3% DM supplementations. Moreover, the concentration of propionic acid (C3) exhibited the variations across the different levels of MELM (P < 0.05), with the maximum concentration obtained at 2% DM. The populations of Fibrobacter succinogenes, Ruminococcus albus, Ruminococcus flavefaciens, and Megasphaera elsdenii revealed a significant increase (P < 0.05), while the quantity of Methanobacteriales decreased linearly with increasing doses of MELM. In conclusion, the inclusion of MELM at a concentration of 2% DM in the substrate which could enhance cumulative gas production, NDF and true digestibility, C3 production, and microbial population, while reducing methane concentration and Methanobacterial abundance.

High-performance internal circulation anaerobic granular sludge reactor for cattle slaughterhouse wastewater treatment and simultaneous biogas production.

This research investigates the efficacy of a high-performance pilot-scale Internal Circulation Anaerobic Reactor inoculated with Granular Sludge (ICAGSR) for treating cattle slaughterhouse wastewater while concurrently generating biogas. The primary objective is to assess the efficiency and performance of ICAGSR in terms of organic pollutant removal and biogas production using granular anaerobic sludge. The research methodology entails operating the ICAGSR system under ambient conditions and systematically varying key parameters, including different Hydraulic Retention Times (HRTs) (24, 12, and 8 h) and Organic Loading Rates (OLRs) (3.3, 6.14, and 12.83 kg COD/m³. d). The study focuses on evaluating pollutants' removal and biogas production rates. Results reveal that the ICAGSR system achieves exceptional removal efficiency for organic pollutants, with Chemical Oxygen Demand (COD) removal exceeding 74%, 67%, and 68% at HRTs of 24, 12, and 8 h, respectively. Furthermore, the system demonstrates stable and sustainable biogas production, maintaining average methane contents of 80%, 76%, and 72% throughout the experimental period. The successful operation of the ICAGSR system underscores its potential as a viable technology for treating cattle slaughterhouse wastewater and generating renewable biogas. In conclusion, this study contributes to wastewater treatment and renewable energy production by providing a comprehensive analysis of the ICAGSR system's hydrodynamic properties. The research enhances our understanding of the system's performance optimization under varying conditions, emphasizing the benefits of utilizing ICAGSR reactors with granular sludge as an effective and sustainable approach. Identifying current gaps, future research directions aim to further refine and broaden the application of ICAGSR technology in wastewater treatment and renewable energy initiatives.

Viruses contribute to microbial diversification in the rumen ecosystem and are associated with certain animal production traits.

BACKGROUND: The rumen microbiome enables ruminants to digest otherwise indigestible feedstuffs, thereby facilitating the production of high-quality protein, albeit with suboptimal efficiency and producing methane. Despite extensive research delineating associations between the rumen microbiome and ruminant production traits, the functional roles of the pervasive and diverse rumen virome remain to be determined. RESULTS: Leveraging a recent comprehensive rumen virome database, this study analyzes virus-microbe linkages, at both species and strain levels, across 551 rumen metagenomes, elucidating patterns of microbial and viral diversity, co-occurrence, and virus-microbe interactions. Additionally, this study assesses the potential role of rumen viruses in microbial diversification by analyzing prophages found in rumen metagenome-assembled genomes. Employing CRISPR-Cas spacer-based matching and virus-microbe co-occurrence network analysis, this study suggests that the viruses in the rumen may regulate microbes at strain and community levels through both antagonistic and mutualistic interactions. Moreover, this study establishes that the rumen virome demonstrates responsiveness to dietary shifts and associations with key animal production traits, including feed efficiency, lactation performance, weight gain, and methane emissions. CONCLUSIONS: These findings provide a substantive framework for further investigations to unravel the functional roles of the virome in the rumen in shaping the microbiome and influencing overall animal production performance. Video Abstract.

High production of ectoine from methane in genetically engineered Methylomicrobium alcaliphilum 20Z by preventing ectoine degradation.

BACKGROUND: Methane is a greenhouse gas with a significant potential to contribute to global warming. The biological conversion of methane to ectoine using methanotrophs represents an environmentally and economically beneficial technology, combining the reduction of methane that would otherwise be combusted and released into the atmosphere with the production of value-added products. RESULTS: In this study, high ectoine production was achieved using genetically engineered Methylomicrobium alcaliphilum 20Z, a methanotrophic ectoine-producing bacterium, by knocking out doeA, which encodes a putative ectoine hydrolase, resulting in complete inhibition of ectoine degradation. Ectoine was confirmed to be degraded by doeA to N-α-acetyl-L-2,4-diaminobutyrate under nitrogen depletion conditions. Optimal copper and nitrogen concentrations enhanced biomass and ectoine production, respectively. Under optimal fed-batch fermentation conditions, ectoine production proportionate with biomass production was achieved, resulting in 1.0 g/L of ectoine with 16 g/L of biomass. Upon applying a hyperosmotic shock after high-cell-density culture, 1.5 g/L of ectoine was obtained without further cell growth from methane. CONCLUSIONS: This study suggests the optimization of a method for the high production of ectoine from methane by preventing ectoine degradation. To our knowledge, the final titer of ectoine obtained by M. alcaliphilum 20ZDP3 was the highest in the ectoine production from methane to date. This is the first study to propose ectoine production from methane applying high cell density culture by preventing ectoine degradation.

Sulfur cycling likely obscures dynamic biologically-driven iron redox cycling in contemporary methane seep environments.

Deep-sea methane seeps are amongst the most biologically productive environments on Earth and are often characterised by stable, low oxygen concentrations and microbial communities that couple the anaerobic oxidation of methane to sulfate reduction or iron reduction in the underlying sediment. At these sites, ferrous iron (Fe2+) can be produced by organoclastic iron reduction, methanotrophic-coupled iron reduction, or through the abiotic reduction by sulfide produced by the abundant sulfate-reducing bacteria at these sites. The prevalence of Fe2+in the anoxic sediments, as well as the availability of oxygen in the overlying water, suggests that seeps could also harbour communities of iron-oxidising microbes. However, it is unclear to what extent Fe2+ remains bioavailable and in solution given that the abiotic reaction between sulfide and ferrous iron is often assumed to scavenge all ferrous iron as insoluble iron sulfides and pyrite. Accordingly, we searched the sea floor at methane seeps along the Cascadia Margin for microaerobic, neutrophilic iron-oxidising bacteria, operating under the reasoning that if iron-oxidising bacteria could be isolated from these environments, it could indicate that porewater Fe2+ can persist is long enough for biology to outcompete pyritisation. We found that the presence of sulfate in our enrichment media muted any obvious microbially-driven iron oxidation with most iron being precipitated as iron sulfides. Transfer of enrichment cultures to sulfate-depleted media led to dynamic iron redox cycling relative to abiotic controls and sulfate-containing cultures, and demonstrated the capacity for biogenic iron (oxyhydr)oxides from a methane seep-derived community. 16S rRNA analyses revealed that removing sulfate drastically reduced the diversity of enrichment cultures and caused a general shift from a Gammaproteobacteria-domainated ecosystem to one dominated by Rhodobacteraceae (Alphaproteobacteria). Our data suggest that, in most cases, sulfur cycling may restrict the biological "ferrous wheel" in contemporary environments through a combination of the sulfur-adapted sediment-dwelling ecosystems and the abiotic reactions they influence.

Single mixed refrigerant biomethane liquefaction plant integrated with solar energy: Dynamic simulation for the decarbonization of the heavy road transport sector.

This works proposes a dynamic thermoeconomic analysis of a liquefied biomethane production plant to meet the fuel demand of a fleet of heavy duty trucks in the south of Italy. The biomethane is obtained from the upgrading of the biogas produced by means of anaerobic digestion through a plug flow reactor fed by organic fraction of municipal solid waste. The upgrading of the biogas is realized using a three-stage membrane compression process, producing a 96 % pure biomethane. The biomethane liquefaction is realized using a single-mixed refrigerant process and compared to a Linde cycle process. The whole system is assisted by solar energy to reduce the fossil energy consumption of the process and feed-in tariffs are considered as funding policy. The models for the anaerobic digestion, the biogas upgrading, and the biomethane liquefaction are in detail developed in MatLab. The anaerobic digestion model is based on the ADM1 biological model, integrated with a suitable heat transfer model. The biogas upgrading model is based on a simplified Fick model. The liquefaction model is based on an equivalent two heat-exchangers model, taking into account the transient heat transfer. All the components are then integrated in TRNSYS to perform the dynamic simulation for one operating year of the whole system. Results from the thermoeconomic analysis are outstanding in terms of profitability, showing a payback period of less than 2 years and a Net Present Value of the system of 402 M€. The great environmental impact is also confirmed by a Primary Energy Saving of 91 % and a dramatic reduction of 86 % of the CO2 equivalent emissions.

Comprehensive hydrothermal pretreatment of municipal sewage sludge: A systematic approach.

This study provides a comprehensive analysis of the potential impact of hydrothermal pretreatment (HTP) on municipal thickened waste-activated sludge (TWAS) and its integration with anaerobic digestion (AD). The research demonstrates that HTP conditions (170 °C, 3 bars for 30 min) can increase the solubilization of macromolecular organic compounds by 41%, which enhances biodegradability in semicontinuous bioreactors. This treatment also results in a 50% reduction in chemical oxygen demand (COD) and a 63% increase in the destruction of volatile solids (VS). The combination of HTP with AD significantly boosts methane yields by 51%, reaching 176 ml/g COD, and improves the digestate dewaterability, doubling the solid content in the dewatered cake. However, a higher polymer dose is required compared to conventional AD. Microbial community analysis correlates the observed performance and alterations; it indicates that HTP enhances resilience to stress conditions such as ammonia toxicity. This comprehensive study provides valuable insights into the transition from wastewater treatment plants (WWTPs) to resource recovery facilities (RRF) in line with circular economy principles.

Physiological basis for atmospheric methane oxidation and methanotrophic growth on air.

Atmospheric methane oxidizing bacteria (atmMOB) constitute the sole biological sink for atmospheric methane. Still, the physiological basis allowing atmMOB to grow on air is not well understood. Here we assess the ability and strategies of seven methanotrophic species to grow with air as sole energy, carbon, and nitrogen source. Four species, including three outside the canonical atmMOB group USCα, enduringly oxidized atmospheric methane, carbon monoxide, and hydrogen during 12 months of growth on air. These four species exhibited distinct substrate preferences implying the existence of multiple metabolic strategies to grow on air. The estimated energy yields of the atmMOB were substantially lower than previously assumed necessary for cellular maintenance in atmMOB and other aerobic microorganisms. Moreover, the atmMOB also covered their nitrogen requirements from air. During growth on air, the atmMOB decreased investments in biosynthesis while increasing investments in trace gas oxidation. Furthermore, we confirm that a high apparent specific affinity for methane is a key characteristic of atmMOB. Our work shows that atmMOB grow on the trace concentrations of methane, carbon monoxide, and hydrogen present in air and outlines the metabolic strategies that enable atmMOB to mitigate greenhouse gases.

Mechanisms of secondary biogenic coalbed methane formation in bituminous coal seams: a joint experimental and multi-omics study.

Coal seam microbes, as endogenous drivers of secondary biogenic gas production in coal seams, might be related to methane production in coal seams. In this study, we carried out anaerobic indoor culture experiments of microorganisms from three different depths of bituminous coal seams in Huainan mining area, and revealed the secondary biogas generation mechanism of bituminous coal seams by using the combined analysis of macro-genome and metabolism multi-omics. The results showed that the cumulative mass molar concentrations (Molality) of biomethane production increased with the increase of the coal seam depth in two consecutive cycles. At the genus level, there were significant differences in the bacterial and archaeal community structures corresponding to the three coal seams 1#, 6#, and 9#(p < 0.05). The volatile matter of air-dry basis (Vad) of coal was significantly correlated with differences in genus-level composition of bacteria and archaea, with correlations of R bacterial = 0.368 and R archaeal = 0.463, respectively. Functional gene analysis showed that the relative abundance of methanogenesis increased by 42% before and after anaerobic fermentation cultivation. Meanwhile, a total of 11 classes of carbon metabolism homologues closely related to methanogenesis were detected in the liquid metabolites of coal bed microbes after 60 days of incubation. Finally, the fatty acid, amino acid and carbohydrate synergistic methanogenic metabolic pathway was reconstructed based on the Kyoto Encyclopedia of Genes and Genomes (KEGG) database. The expression level of mcrA gene within the metabolic pathway of the 1# deep coal sample was significantly higher than that of the other two groups (p < 0.05 for significance), and the efficient expression of mcrA gene at the end of the methanogenic pathway promoted the conversion of bituminous coal organic matter to methane. Therefore, coal matrix compositions may be the key factors causing diversity in microbial community and metabolic function, which might be related to the different methane content in different coal seams.

Simultaneous methane mitigation and nitrogen removal by denitrifying anaerobic methane oxidation in lake sediments.

Methane (CH4) is a potent greenhouse gas, with lake ecosystems significantly contributing to its global emissions. Denitrifying anaerobic methane oxidation (DAMO) process, mediated by NC10 bacteria and ANME-2d archaea, links global carbon and nitrogen cycles. However, their potential roles in mitigating methane emissions and removing nitrogen from lake ecosystems remain unclear. This study explored the spatial variations in activities of nitrite- and nitrate-DAMO and their functional microbes in Changdanghu Lake sediments (Jiangsu Province, China). The results showed that although the average abundance of ANME-2d archaea (5.0 × 106 copies g-1) was significantly higher than that of NC10 bacteria (2.1 × 106 copies g-1), the average potential rates of nitrite-DAMO (4.59 nmol 13CO2 g-1 d-1) and nitrate-DAMO (5.01 nmol 13CO2 g-1 d-1) showed no significant difference across all sampling sites. It is estimated that nitrite- and nitrate-DAMO consumed approximately 6.46 and 7.05 mg CH4 m-2 d-1, respectively, which accordingly achieved 15.07-24.95 mg m-2 d-1 nitrogen removal from the studied lake sediments. Statistical analyses found that nitrite- and nitrate-DAMO activities were both significantly related to sediment nitrate contents and ANME-2d archaeal abundance. In addition, NC10 bacterial and ANME-2d archaeal community compositions showed significant correlations with sediment organic carbon content and water depth. Overall, this study underscores the dual roles of nitrite- and nitrate-DAMO processes in CH4 mitigation and nitrogen elimination and their key environmental impact factors (sediment organic carbon and inorganic nitrogen contents, and water depth) in shallow lake, enhancing the understanding of carbon and nitrogen cycles in freshwater aquatic ecosystems.

Assessing methane emissions from paddy fields through environmental and UAV remote sensing variables.

Concerns about methane (CH4) emissions from rice, a staple sustaining over 3.5 billion people globally, are heightened due to its status as the second-largest contributor to greenhouse gases, driving climate change. Accurate quantification of CH4 emissions from rice fields is crucial for understanding gas concentrations. Leveraging technological advancements, we present a groundbreaking solution that integrates machine learning and remote sensing data, challenging traditional closed chamber methods. To achieve this, our methodology involves extensive data collection using drones equipped with a Micasense Altum camera and ground sensors, effectively reducing reliance on labor-intensive and costly field sampling. In this experimental project, our research delves into the intricate relationship between environmental variables, such as soil conditions and weather patterns, and CH4 emissions. We achieved remarkable results by utilizing unmanned aerial vehicles (UAV) and evaluating over 20 regression models, emphasizing an R2 value of 0.98 and 0.95 for the training and testing data, respectively. This outcome designates the random forest regressor as the most suitable model with superior predictive capabilities. Notably, phosphorus, GRVI median, and cumulative soil and water temperature emerged as the model's fittest variables for predicting these values. Our findings underscore an innovative, cost-effective, and efficient alternative for quantifying CH4 emissions, marking a significant advancement in the technology-driven approach to evaluating rice growth parameters and vegetation indices, providing valuable insights for advancing gas emissions studies in rice paddies.

Effects of chironomid larvae density and mosquito biocide on methane and carbon dioxide dynamics in freshwater sediments.

Small lentic water bodies are important emitters of methane (CH4) and carbon dioxide (CO2), but the processes regulating their dynamics and susceptibility to human-induced stressors are not fully understood. Bioturbation by chironomid larvae has been proposed as a potentially important factor controlling the dynamics of both gases in aquatic sediments. Chironomid abundance can be affected by the application of biocides for mosquito control, such as Bti (Bacillus thuringiensis var. israelensis). Previous research has attributed increases in CH4 and CO2 emissions after Bti application to reduced bioturbation by chironomids. In this study, we separately tested the effect of chironomid bioturbation and Bti addition on CH4 production and emission from natural sediments. In a set of 15 microcosms, we compared CH4 and CO2 emission and production rates with high and low densities of chironomid larvae at the bioturbating stage, and standard and five times (5x) standard Bti dose, with control sediments that contained neither chironomid larvae nor Bti. Regardless of larvae density, chironomid larvae did not affect CH4 nor CO2 emission and production of the sediment, although both rates were more variable in the treatments with organisms. 5xBti dosage, however, led to a more than three-fold increase in CH4 and CO2 production rates, likely stimulated by bioavailable dissolved carbon in the Bti excipient and priming effects. Our results suggest weak effects of bioturbating chironomid larvae on the CH4 and CO2 dynamics in aquatic ecosystems. Furthermore, our results point out towards potential functional implications of Bti for carbon cycling beyond those mediated by changes in the macroinvertebrate community.

Sludge degradation, nutrient removal and reduction of greenhouse gas emission by a Chironomus-Azolla wastewater treatment cascade.

Wastewater treatment plants (WWTPs) are a point source of nutrients, emit greenhouse gases (GHGs), and produce large volumes of excess sludge. The use of aquatic organisms may be an alternative to the technical post-treatment of WWTP effluent, as they play an important role in nutrient dynamics and carbon balance in natural ecosystems. The aim of this study was therefore to assess the performance of an experimental wastewater-treatment cascade of bioturbating macroinvertebrates and floating plants in terms of sludge degradation, nutrient removal and lowering GHG emission. To this end, a full-factorial experiment was designed, using a recirculating cascade with a WWTP sludge compartment with or without bioturbating Chironomus riparius larvae, and an effluent container with or without the floating plant Azolla filiculoides, resulting in four treatments. To calculate the nitrogen (N), phosphorus (P) and carbon (C) mass balance of this system, the N, P and C concentrations in the effluent, biomass production, and sludge degradation, as well as the N, P and C content of all compartments in the cascade were measured during the 26-day experiment. The presence of Chironomus led to an increased sludge degradation of 44% compared to 25% in the control, a 1.4 times decreased transport of P from the sludge and a 2.4 times increased transport of N out of the sludge, either into Chironomus biomass or into the water column. Furthermore, Chironomus activity decreased methane emissions by 92%. The presence of Azolla resulted in a 15% lower P concentration in the effluent than in the control treatment, and a CO2 uptake of 1.13 kg ha-1 day-1. These additive effects of Chironomus and Azolla resulted in an almost two times higher sludge degradation, and an almost two times lower P concentration in the effluent. This is the first study that shows that a bio-based cascade can strongly reduce GHG and P emissions simultaneously during the combined polishing of wastewater sludge and effluent, benefitting from the additive effects of the presence of both macrophytes and invertebrates. In addition to the microbial based treatment steps already employed on WWTPs, the integration of higher organisms in the treatment process expands the WWTP based ecosystem and allows for the inclusion of macroinvertebrate and macrophyte mediated processes. Applying macroinvertebrate-plant cascades may therefore be a promising tool to tackle the present and future challenges of WWTPs.

Underestimation of Thermogenic Methane Emissions in New York City.

Recent studies have shown that methane emissions are underestimated by inventories in many US urban areas. This has important implications for climate change mitigation policy at the city, state, and national levels. Uncertainty in both the spatial distribution and sectoral allocation of urban emissions can limit the ability of policy makers to develop appropriately focused emission reduction strategies. Top-down emission estimates based on atmospheric greenhouse gas measurements can help to improve inventories and inform policy decisions. This study presents a new high-resolution (0.02 × 0.02°) methane emission inventory for New York City and its surrounding area, constructed using the latest activity data, emission factors, and spatial proxies. The new high-resolution inventory estimates of methane emissions for the New York-Newark urban area are 1.3 times larger than those for the gridded Environmental Protection Agency inventory. We used aircraft mole fraction measurements from nine research flights to optimize the high-resolution inventory emissions within a Bayesian inversion. These sectorally optimized emissions show that the high-resolution inventory still significantly underestimates methane emissions within the New York-Newark urban area, primarily because it underestimates emissions from thermogenic sources (by a factor of 2.3). This suggests that there remains a gap in our process-based understanding of urban methane emissions.

Chemiresistors Based on Hybrid Nanostructures Obtained from Graphene and Conducting Polymers with Potential Use in Breath Methane Detection Associated with Irritable Bowel Syndrome.

This paper describes the process of producing chemiresistors based on hybrid nanostructures obtained from graphene and conducting polymers. The technology of graphene presumed the following: dispersion and support stabilization based on the chemical vapor deposition technique; transfer of the graphene to the substrate by spin-coating of polymethyl methacrylate; and thermal treatment and electrochemical delamination. For the process at T = 950 °C, a better settlement of the grains was noticed, with the formation of layers predominantly characterized by peaks and not by depressions. The technology for obtaining hybrid nanostructures from graphene and conducting polymers was drop-casting, with solutions of Poly(3-hexylthiophene (P3HT) and Poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-bithiophene] (F8T2). In the case of F8T2, compared to P3HT, a 10 times larger dimension of grain size and about 7 times larger distances between the peak clusters were noticed. To generate chemiresistors from graphene-polymer structures, an ink-jet printer was used, and the metallization was made with commercial copper ink for printed electronics, leading to a structure of a resistor with an active surface of about 1 cm2. Experimental calibration curves were plotted for both sensing structures, for a domain of CH4 of up to 1000 ppm concentration in air. A linearity of the curve for the low concentration of CH4 was noticed for the graphene structure with F8T2, presenting a sensitivity of about 6 times higher compared with the graphene structure with P3HT, which makes the sensing structure of graphene with F8T2 more feasible and reliable for the medical application of irritable bowel syndrome evaluation.

Organic Matter Accumulation and Hydrology as Drivers of Greenhouse Gas Dynamics in Newly Developed Artificial Channels.

Artificial channels, common features of inland waters, have been suggested as significant contributors to methane (CH4) and carbon dioxide (CO2) dynamics and emissions; however, the magnitude and drivers of their CH4 and CO2 emissions (diffusive and ebullitive) remain unclear. They are characterized by reduced flow compared to the donor river, which results in suspended organic matter (OM) accumulation. We propose that in such systems hydrological controls will be reduced and OM accumulation will control emissions by promoting methane production and outgassing. Here, we monitored summertime CH4 and CO2 concentrations and emissions on six newly constructed river-fed artificial channels, from bare riparian mineral soil to lotic channels, under two distinct flow regimes. Chamber-based fluxes were complemented with hydrology, total fluxes (diffusion + ebullition), and suspended OM accumulation assessments. During the first 6 weeks after the flooding, inflowing riverine water dominated the emissions over in-channel contributions. Afterwards, a substantial accumulation of riverine suspended OM (≥50% of the channel's volume) boosted in-channel methane production and led to widespread ebullition 10× higher than diffusive fluxes, regardless of the flow regime. Our finding suggests ebullition as a dominant pathway in these anthropogenic systems, and thus, their impact on regional methane emissions might have been largely underestimated.

Metal-(Acyclic Diaminocarbene) Complexes Demonstrate Nanomolar Antiproliferative Activity against Triple-Negative Breast Cancer.

Invited for the cover of this issue are Tatiyana Serebryanskaya, Mikhail Kinzhalov and co-workers at St. Petersburg State University, the Research Institute for Physical Chemical Problems, Belarusian State University, Togliatti State University and Blokhin National Medical Research Center of Oncology. The image depicts the shield of Pallas Athena with the structure of a palladium carbene complex that protects against triple-negative breast cancer. Read the full text of the article at 10.1002/chem.202400101.