Preparation and Evaluation of a Novel 99mTc-Labeled Niraparib Isonitrile Complex as a Potential PARP-1 Imaging Agent.

Poly ADP-ribose polymerase (PARP) plays an important role in the DNA repair process and has become an attractive target for cancer therapy in recent years. Given that niraparib has good clinical efficacy as a PARP inhibitor, this study aimed to develop radiolabeled niraparib derivatives for tumor imaging to detect PARP expression and improve the accuracy of stratified patient therapy. The niraparib isonitrile derivative (CNPN) was designed, synthesized, and radiolabeled to obtain the [99mTc]Tc-CNPN complex with high radiochemical purity (>95%). It was lipophilic and stable in vitro. In HeLa cell experiments, the uptake of [99mTc]Tc-CNPN was effectively inhibited by the ligand CNPN, indicating the binding affinity for PARP. According to the biodistribution studies of HeLa tumor-bearing mice, [99mTc]Tc-CNPN has moderate tumor uptake and can be effectively inhibited, demonstrating its specificity for targeting PARP. The SPECT imaging results showed that [99mTc]Tc-CNPN had tumor uptake at 2 h postinjection. All of the results of this study indicated that [99mTc]Tc-CNPN is a promising tumor imaging agent that targets PARP.

4-Iodobenzonitrile as a fluorogenic derivatization reagent for chromatographic analysis of L-p-boronophenylalanine in whole blood samples using Suzuki coupling reaction.

BACKGROUND: L-p-Boronophehylalanine (BPA) is used in boron neutron capture therapy (BNCT), which is a novel selective cancer radiotherapy technique. It is important to measure BPA levels in human blood for effective radiotherapy; a prompt gamma-ray spectrometer, ICP-AES, and ICP-MS have been used for this purpose. However, these methods require sophisticated and expensive apparatuses as well as experienced analysts. Herein, we propose an HPLC-FL method for the determination of BPA after precolumn derivatization. A new fluorogenic reagent for aryl boronic acid derivatives, namely, 4-iodobenzonitrile, was employed for the fluorogenic derivatization of BPA based on the Suzuki coupling reaction. RESULTS: After the fluorogenic derivatization, a fluorescent cyanobiphenyl derivative is formed with maximum fluorescence at 335 nm after excitation at 290 nm. The developed method showed good linearity (r2=0.997) over the concentration range of 0.5-1000 nmol/L, and the detection limit (S/N = 3) was 0.26 nmol/L. The proposed method is more sensitive than previously reported methods for the determination of BPA, including the ICP-MS. Finally, the proposed method was successively applied to the measurement of BPA in human whole blood samples with a good recovery rate (≥95.7 %) using only 10 µL of blood sample. The proposed method offers a simple and efficient solution for monitoring BPA levels in BNCT-treated patients. SIGNIFICANCE: 4-Iodobenzonitrile was investigated as a new fluorogenic reagent for BPA based on Suzuki coupling. A new HPLC-FL method for BPA in whole blood samples with ultrasensitivity was developed. The developed method is superior in sensitivity to all previously reported methods for BPA. The method requires only a very small sample volume, making it suitable for micro-blood analysis of BPA via fingerstick sampling.

[Preparation of magnetic carbon nitride composite toward phosphopeptide enrichment].

Protein phosphorylation plays an important role in cellular signaling and disease development. Advances in mass spectrometry-based proteomics have enabled qualitative and quantitative phosphorylation studies as well as in-depth biological explorations for biomarker discovery and signaling pathway analysis. However, the dynamic changes that occur during phosphorylation and the low abundance of target analytes render direct analysis difficult because mass spectral detection offers no selectivity, unlike immunoassays such as Western blot and enzyme-linked immunosorbent assay (ELISA). The present study aimed to solve one of the key problems in the specific and efficient isolation of phosphorylated peptides. A method based on a magnetic carbon nitride composite coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was developed for the enrichment and analysis of phosphopeptides with low abundance in complex samples. Magnetic carbon nitride composite was synthesized and characterized by electron microscopy, infrared spectroscopy, and X-ray diffractometry. The composite showed a well-distributed two-dimensional layered structure and functional groups with excellent paramagnetic performance. Two classical phosphoproteins, namely, α- and ß-caseins, were selected as model phosphorylated samples to assess the performance of the proposed enrichment technique. The magnetic carbon nitride composite exhibited high selectivity and sensitivity for phosphopeptide enrichment. The limit of detection was determined by MALDI-TOF-MS analysis to be 0.1 fmol. The selectivity of the method was investigated using the digest mixtures of α-casein, ß-casein, and bovine serum albumin (BSA) with different mass ratios (1∶1∶1000, 1∶1∶2000, and 1∶1∶5000). Direct analysis of the samples revealed the dominance of spectral signals from the abundant peptides in BSA. After enrichment with the magnetic carbon nitride composite, the high concentration of background proteins was washed away and only the signals of the phosphopeptides were captured. The signals from the casein proteins were clearly observed with little background noise, indicating the high selectivity of the composite material. The robustness of the method was tested by assessing the reusability of the same batch of magnetic carbon nitride materials over 20 cycles of enrichment. The composite showed nearly the same enrichment ability even after several cycles of reuse, demonstrating its potential applicability for a large number of clinical samples. Finally, the method was applied to the analysis of phosphopeptides from several commonly used phosphoprotein-containing samples, including skimmed milk digest, human serum, and human saliva; these samples are significant in the analysis of food quality, disease biomarkers, and liquid biopsies for cancer. Without enrichment, no phosphopeptide was detected because of the high abundance of nonphosphopeptide materials dominating the spectral signals obtained. After pretreatment with the developed magnetic carbon nitride composite, most of the phosphosites were identified with high selectivity and sensitivity via MALDI-TOF-MS. These results revealed the practicality of the developed approach for clinical applications. In addition, our method may potentially be employed for phosphoproteomics with real complex biological samples.

Ratiometric fluorescence and colorimetric strategies for assessing activity of butyrylcholinesterase in human serum using g-C3N4 nanosheets, silver ion and o-phenylenediamine.

Ratiometric fluorescence and colorimetric strategies for detecting activity of butyrylcholinesterase (BChE) in human serum were developed by using g-C3N4 nanosheets, silver ion (Ag+) and o-phenylenediamine (OPD) as chromogenic agents. The oxidation-reduction reaction of OPD and Ag+ generates 2,3-diaminophenazine (oxOPD). Under exciation at 370 nm, g-C3N4 nanosheets and oxOPD emit fluorescence at 440 nm (F440) and 560 nm (F560), respectively. Additionally, oxOPD exhibits quenching ability towards g-C3N4 nanosheets via photoinduced electron transfer (PET) process. Thiocholine (TCh), as a product of BChE-catalyzed hydrolysis reaction of butylthiocholine iodide (BTCh), can coordinate with Ag+ intensively, and consequently diminish the amount of free Ag+ in the testing system. Less amount of free Ag+ leads to less production of oxOPD, resulting in less fluorescence quenching towards g-C3N4 nanosheets as well as less fluorescence emission of oxOPD. Therefore, by using g-C3N4 nanosheets and oxOPD as fluorescence indicators, the intensity ratio of their fluorescence (F440/F560) was calculated and employed to evaluate the activity of BChE. Similarly, the color variation of oxOPD indicated by the absorbance at 420 nm (ΔA420) was monitored for the same purpose. These strategies were validated to be sensitive and selective for detecting BChE activity in human serum, with limits of detection (LODs) of 0.1 U L-1 for ratiometric fluorescence mode and 0.7 U L-1 for colorimetric mode.

Click-chemistry mediated synthesis of OTBN-1,2,3-Triazole derivatives exhibiting STK33 inhibition with diverse anti-cancer activities.

There is a continuous and pressing need to establish new brain-penetrant bioactive compounds with anti-cancer properties. To this end, a new series of 4'-((4-substituted-4,5-dihydro-1H-1,2,3-triazol-1-yl)methyl)-[1,1'-biphenyl]-2-carbonitrile (OTBN-1,2,3-triazole) derivatives were synthesized by click chemistry. The series of bioactive compounds were designed and synthesized from diverse alkynes and N3-OTBN, using copper (II) acetate monohydrate in aqueous dimethylformamide at room temperature. Besides being highly cost-effective and significantly reducing synthesis, the reaction yielded 91-98 % of the target products without the need of any additional steps or chromatographic techniques. Two analogues exhibit promising anti-cancer biological activities. Analogue 4l shows highly specific cytostatic activity against lung cancer cells, while analogue 4k exhibits pan-cancer anti-growth activity. A kinase screen suggests compound 4k has single-digit micromolar activity against kinase STK33. High STK33 RNA expression correlates strongly with poorer patient outcomes in both adult and pediatric glioma. Compound 4k potently inhibits cell proliferation, invasion, and 3D neurosphere formation in primary patient-derived glioma cell lines. The observed anti-cancer activity is enhanced in combination with specific clinically relevant small molecule inhibitors. Herein we establish a novel biochemical kinase inhibitory function for click-chemistry-derived OTBN-1,2,3-triazole analogues and further report their anti-cancer activity in vitro for the first time.

Unlocking enhanced photocatalytic power: Donor-acceptor synergy in non-metallic g-C3N4 hollow nanospheres.

Selecting safe, non-toxic, and non-metallic semiconductor materials that facilitate the degradation of pollutants in water stands out as an optimal approach to combat environmental pollution. Herein, graphitic carbon nitride (g-C3N4)-based hollow nanospheres nonmetallic photocatalyst modified with covalent organic framework materials named TpMA, based on 1, 3, 5-trimethylchloroglucuronide (Tp) and melamine (MA), was successfully synthesized (abbreviated as CNTP). The ordered electron donor-acceptor structure inherent in TpMA contributed to enhancing the transport efficiency of photogenerated carriers in CNTP. The CNTP photocatalysts exhibited excellent performance in degrading rhodamine B and tetracycline in visible light, with optimal degradation rates reached more than 90% in 60 and 80 min, respectively, which were 5.3 and 3.0 times higher than those of pure CNNS. The increased photocatalytic efficiency observed in CNTP composites could be traced back to the covalently connection between the two molecules, forming a π-conjugated system that facilitated the separative efficiency of photogenerated electron-hole pairs and intensified the utilization of visible light. This study provided a new means to design and fabricate highly efficient and environmentally friendly non-metallic photocatalytic materials.

Development of Novel ß-Carboline/Furylmalononitrile Hybrids as Type I/II Photosensitizers with Chemo-Photodynamic Therapy and Minimal Toxicity.

Chemo-photodynamic therapy is a treatment method that combines chemotherapy and photodynamic therapy and has demonstrated significant potential in cancer treatment. However, the development of chemo-photodynamic therapeutic agents with fewer side effects still poses a challenge. Herein, we designed and synthesized a novel series of ß-carboline/furylmalononitrile hybrids 10a-i and evaluated their chemo-photodynamic therapeutic effects. Most of the compounds were photodynamically active and exhibited cytotoxic effects in four cancer cells. In particular, 10f possessed type-I/II photodynamic characteristics, and its 1O2 quantum yield increased by 3-fold from pH 7.4 to 4.5. Most interestingly, 10f exhibited robust antiproliferative effects by tumor-selective cytotoxicities and hypoxic-overcoming phototoxicities. In addition, 10f generated intracellular ROS and induced hepatocellular apoptosis, mitochondrial damage, and autophagy. Finally, 10f demonstrated extremely low acute toxicity (LD50 = 1415 mg/kg) and a high tumor-inhibitory rate of 80.5% through chemo-photodynamic dual therapy. Our findings may provide a promising framework for the design of new photosensitizers for chemo-photodynamic therapy.

The Circadian Clock Gene PHYTOCLOCK1 Mediates the Diurnal Emission of the Anti-Insect Volatile Benzyl Nitrile from Damaged Tea (Camellia sinensis) Plants.

Benzyl nitrile from tea plants attacked by various pests displays a diurnal pattern, which may be closely regulated by the endogenous circadian clock. However, the molecular mechanism by the circadian clock of tea plants that regulates the biosynthesis and release of volatiles remains unclear. In this study, the circadian clock gene CsPCL1 can activate both the expression of the benzyl nitrile biosynthesis-related gene CsCYP79 and the jasmonic acid signaling-related transcription factor CsMYC2 involved in upregulating CsCYP79 gene, thereby resulting in the accumulation and release of benzyl nitrile. Therefore, the anti-insect function of benzyl nitrile was explored in the laboratory. The application of slow-release beads of benzyl nitrile in tea plantations significantly reduced the number of tea geometrids and had positive effects on the yield of fresh tea leaves. These findings reveal the potential utility of herbivore-induced plant volatiles for the green control of pests in tea plantations.

Near-infrared fluorescent probe for the imaging of viscosity in fatty liver mice and valuation of drug efficacy.

Fatty liver disease affects at least 25 percent of the population worldwide and is a severe metabolic syndrome. Viscosity is closely related to fatty liver disease, so it is urgent to develop an effective tool for monitoring viscosity. Herein, a NIR fluorescent probe called MBC-V is developed for imaging viscosity, consisting of dimethylaniline and malonitrile-benzopyran. MBC-V is non-fluorescent in low viscosity solutions due to intramolecular rotation. In high viscosity solution, the intramolecular rotation of MBC-V is suppressed and the fluorescence is triggered. MBC-V has long emission wavelength at 720 nm and large Stokes shift about 160 nm. Moreover, MBC-V can detect changes in cell viscosity in fatty liver cells, and can image the therapeutic effects of drug in fatty liver cells. By taking advantage of NIR emission, MBC-V can be used as an imaging tool for fatty liver disease and a way to evaluate the therapeutic effect of drug for fatty liver disease.

Macrocyclic Azapeptide Nitriles: Structure-Based Discovery of Potent SARS-CoV-2 Main Protease Inhibitors as Antiviral Drugs.

Given the crucial role of the main protease (Mpro) in the replication cycle of SARS-CoV-2, this viral cysteine protease constitutes a high-profile drug target. We investigated peptidomimetic azapeptide nitriles as auspicious, irreversibly acting inhibitors of Mpro. Our systematic approach combined an Mpro active-site scanning by combinatorially assembled azanitriles with structure-based design. Encouraged by the bioactive conformation of open-chain inhibitors, we conceptualized the novel chemotype of macrocyclic azanitriles whose binding mode was elucidated by cocrystallization. This strategy provided a favorable entropic contribution to target binding and resulted in the development of the extraordinarily potent Mpro inhibitor 84 with an IC50 value of 3.23 nM and a second-order rate constant of inactivation, kinac/Ki, of 448,000 M-1s-1. The open-chain Mpro inhibitor 58, along with the macrocyclic compounds 83 and 84, a broad-spectrum anticoronaviral agent, demonstrated the highest antiviral activity with EC50 values in the single-digit micromolar range. Our findings are expected to promote the future development of peptidomimetic Mpro inhibitors as anti-SARS-CoV-2 agents.

Unveiling carcinogenic pollutant levels in environmental water samples through facile fabrication of gold nanoparticles on sulfur-doped graphitic carbon nitride.

Extensive utilization of pesticides and herbicides to boost agricultural production increased the environmental health risks, which can be mitigate with the aid of highly sensitive detection systems. In this study, an electrochemical sensor for monitoring the carcinogenic pesticides in the environmental samples has been developed based on sulfur-doped graphitic-carbon nitride-gold nanoparticles (SCN-AuNPs) nanohybrid. Thermal polycondensation of melamine with thiourea followed by solvent exfoliation via ultrasonication leads to SCN formation and electroless deposition of AuNPs on SCN leads to SCN-AuNPs nanohybrid synthesis. The chemical composition, S-doping, and the morphology of the nanohybrid were confirmed by various microscopic and spectroscopic tools. The as-synthesized nanohybrid was fabricated with glassy carbon (GC) electrode for determining the carcinogenic hydrazine (HZ) and atrazine (ATZ) in field water samples. The present sensor exhibited superior electrocatalytic activity than GC/SCN and GC/AuNPs electrodes due to the synergism between SCN and AuNPs and the amperometric studies showed the good linear range of detection of 20 nM-0.5 mM and 500 nM-0.5 mM with the limit of detection of 0.22 and 69 nM (S/N = 3) and excellent sensitivity of 1173.5 and 13.96 µA mM-1 cm-2 towards HZ and ATZ, respectively. Ultimately, the present sensor is exploited in environmental samples for monitoring HZ and ATZ and the obtained results are validated with high-performance liquid chromatography (HPLC) technique. The excellent recovery percentage and close agreement with the results of HPLC analysis proved the practicability of the present sensor. In addition, the as-prepared materials were utilized for the photocatalytic degradation of ATZ and the SCN-AuNPs nanohybrid exhibited higher photocatalytic activity with the removal efficiency of 93.6% at 90 min. Finally, the degradation mechanism was investigated and discussed.

ZnO/g-C3N4 photocatalyst activated by low-pressure ultraviolet for restoring the SWASV signals: A fast pretreatment method for electrochemically detecting Cd2+ and Pb2+ in soil extracts.

Soil organic matter (SOM) significantly impacts the detection accuracy of Cd2+ and Pb2+ using square wave anodic stripping voltammetry (SWASV) due to the complexation of SOM to heavy metal ions (HMIs), thereby attenuating SWASV signals. This study explored an effective pretreatment method that combined low-pressure ultraviolet (LPUV) photolysis with the ZnO/g-C3N4 photocatalyst, activating the photocatalyst to generate highly oxidative •OH radicals and O2•- radicals, which effectively disrupted this complexation, consequently restoring the electroactivity of HMIs and achieving high-fidelity SWASV signals. The parameters of the LPUV-ZnO/g-C3N4 photocatalytic system were meticulously optimized, including the pH of photolysis, duration of photolysis, g-C3N4 mass fraction, and concentration of the photocatalyst. Furthermore, the ZnO/g-C3N4 photocatalyst was thoroughly characterized, with an in-depth investigation on the synergistic interaction between ZnO and g-C3N4 and the mechanisms contributing to the restoration of SWASV signals. This synergistic interaction effectively separated charge carriers and reduced charge transfer resistance, enabling photogenerated electrons (e-) from the conduction band of g-C3N4 to be quickly transferred to the conduction band of ZnO, preventing the recombination of e- and hole (h+) and generating more radicals to disrupt complexation and restore the SWASV signals. Finally, the analysis of HMIs in real soil extracts using the proposed pretreatment method demonstrated high detection accuracy of 94.9% for Cd2+ and 99.8% for Pb2+, which validated the feasibility and effectiveness of the proposed method in environmental applications.

Effect of Morphology Modification of BiFeO3 on Photocatalytic Efficacy of P-g-C3N4/BiFeO3 Composites.

This current study assessed the impacts of morphology adjustment of perovskite BiFeO3 (BFO) on the construction and photocatalytic activity of P-infused g-C3N4/U-BiFeO3 (U-BFO/PCN) heterostructured composite photocatalysts. Favorable formation of U-BFO/PCN composites was attained via urea-aided morphology-controlled hydrothermal synthesis of BFO followed by solvosonication-mediated fusion with already synthesized P-g-C3N4 to form U-BFO/PCN composites. The prepared bare and composite photocatalysts' morphological, textural, structural, optical, and photocatalytic performance were meticulously examined through various analytical characterization techniques and photodegradation of aqueous rhodamine B (RhB). Ellipsoids and flakes morphological structures were obtained for U-BFO and BFO, and their effects on the successful fabrication of the heterojunctions were also established. The U-BFO/PCN composite exhibits 99.2% efficiency within 20 min of visible-light irradiation, surpassing BFO/PCN (88.5%), PCN (66.8%), and U-BFO (26.1%). The pseudo-first-order kinetics of U-BFO/PCN composites is 2.41 × 10-1 min-1, equivalent to 2.2 times, 57 times, and 4.3 times of BFO/PCN (1.08 × 10-1 min-1), U-BFO, (4.20 × 10-3 min-1), and PCN, (5.60 × 10-2 min-1), respectively. The recyclability test demonstrates an outstanding photostability for U-BFO/PCN after four cyclic runs. This improved photocatalytic activity exhibited by the composites can be attributed to enhanced visible-light utilization and additional accessible active sites due to surface and electronic band modification of CN via P-doping and effective charge separation achieved via successful composites formation.

Portable and Flexible Hydrogel Sensor for On-Site Atrazine Assay on Agricultural Products.

There is growing attention focused toward the problems of ecological sustainability and food safety raised from the abuse of herbicides, which underscores the need for the development of a portable and reliable sensor for simple, rapid, and user-friendly on-site analysis of herbicide residues. Herein, a novel multifunctional hydrogel composite is explored to serve as a portable and flexible sensor for the facile and efficient analysis of atrazine (ATZ) residues. The hydrogel electrode is fabricated by doping graphite-phase carbon nitride (g-C3N4) into the aramid nanofiber reinforced poly(vinyl alcohol) hydrogel via a simple solution-casting procedure. Benefiting from the excellent electroactivity and large specific surface area of the solid nanoscale component, the prepared hydrogel sensor is capable of simple, rapid, and sensitive detection of ATZ with a detection limit down to 0.002 ng/mL and per test time less than 1 min. After combination with a smartphone-controlled portable electrochemical analyzer, the flexible sensor exhibited satisfactory analytical performance for the ATZ assay. We further demonstrated the applications of the sensor in the evaluation of the ATZ residues in real water and soil samples as well as the user-friendly on-site point-of-need detection of ATZ residues on various agricultural products. We envision that this flexible and portable sensor will open a new avenue on the development of next-generation analytical tools for herbicide monitoring in the environment and agricultural products.

0D/2D dual Fenton α-Fe2O3/Fe-doped g-C3N4 photocatalyst and the synergistic photo-Fenton catalytic mechanism insight.

A novel dual Photo-Fenton photocatalyst Fe2O3-Fe-CN with excellent Fe(III)/Fe(II) conversion efficiency and trace metal ion leaching rate has been fabricated by in-situ deposition of α-Fe2O3 quantum dots on ultrathin porous Fe-doped carbon nitride (Fe-CN) nanosheets. The iron species in Fe-CN and α-Fe2O3 QDs constitute a mutually reinforcing dual Photo-Fenton effect. The 4% Fe2O3-Fe-CN showed superior performance with kobs values 8.60 and 4.80 folders greater than pure CN and Fe-CN, respectively. The synergistic effect between α-Fe2O3 QDs and the ultrathin porous structure of Fe-CN is the primary reason for the outstanding catalytic performance exhibited by α-Fe2O3/Fe-CN. On one hand, the ultrathin porous structure of Fe-CN promotes the rapid transfer of photogenerated electrons. On the other hand, the efficient photogenerated charge separation at the α-Fe2O3/Fe-CN interface enables more photogenerated electrons to participate in the Fe3+/Fe2+ conversion and H2O2 activation. The trapping experiments demonstrate that •OH and •O2- are the primary active species in TC degradation. This work presents novel insights into the design of efficient heterogeneous Fenton catalysts for practical applications.

Quantum-level investigation of air decomposed pollutants gas sensor (Pd-modified g-C3N4) influenced by micro-water content.

In the electrical industry, there are many hazardous gases that pollute the environment and even jeopardize human health, so timely detection and effective control of these hazardous gases is of great significance. In this work, the gas-sensitive properties of Pd-modified g-C3N4 interface for each hazardous gas molecule were investigated from a microscopic viewpoint, taking the hazardous gases (CO, NOx) that may be generated in the power industry as the detection target. Then, the performance of Pd-modifiedg-C3N4 was evaluated for practical applications as a gas sensor material. Novelly, an unconventional means was designed to briefly predict the effect of humidity on the adsorption properties of this sensor material. The final results found that Pd-modified g-C3N4 is most suitable as a potential gas-sensitizing material for NO2 gas sensors, followed by CO. Interestingly, Pd-modified g-C3N4 is less suitable as a potential gas-sensitizing material for NO gas sensors, but has the potential to be used as a NO cleaner (adsorbent). Unconventional simulation explorations of humidity effects show that in practical applications Pd-modified g-C3N4 remains a promising material for gas sensing in specific humidity environments. This work reveals the origin of the excellent properties of Pd-modified g-C3N4 as a gas sensor material and provides new ideas for the detection and treatment of these three hazardous gases.

The adsorption-desorption behavior of chlorothalonil in the cuticles of apple and red jujube.

The distribution fate of chlorothalonil (CHT) in the environment (soil and water) and fruits is controlled by the capacity of cuticles to adsorb and desorb CHT, which directly affects the safety of both the environment and fruits. Batch experiments were conducted to reveal the adsorption-desorption behaviors of CHT in the cuticles of apple and red jujube. The adsorption kinetics showed that both physisorption and chemisorption occurred during the adsorption process. Furthermore, the isothermal adsorption of CHT in the fruit cuticles followed the Freundlich model. The thermodynamic parameters (ΔG ≤ -26.16 kJ/mol, ΔH ≥ 31.05 kJ/mol, ΔS ≥ 0.20 kJ/(mol K) showed that the whole CHT adsorption process was spontaneous, and the hydrophobic interaction was predominant. The CHT adsorption capacity of the apple cuticle was higher than that of the red jujube cuticle, potentially due to the significantly higher alkanes content of apples than that of red jujubes. An appropriate ionic strength (0.01 moL/L) could induce a higher adsorption capacity. In addition, the desorption kinetics were shown to conform to a Quasi-first-order model, meaning that not all the adsorbed CHT could be easily desorbed. The desorption ratios in apple and red jujube cuticles were 41.38% and 35.64%, respectively. The results of Fourier-transformed infrared spectroscopy and X-ray photoelectron spectroscopy further confirmed that CHT could be adsorbed and retained in the fruit cuticles. Investigating the adsorption-desorption behavior of CHT in the apple and red jujube cuticles allowed to determine the ratio of its final distribution in the fruits and environment, providing a theoretical basis to evaluate the risk of residue pesticide.

Discovery of novel biphenyl derivatives as androgen receptor degraders for the treatment of enzalutamide-resistant prostate cancer.

Second-generation AR antagonists, such as enzalutamide, are the primary therapeutic agents for advanced prostate cancer. However, the development of both primary and secondary drug resistance leads to treatment failures and patient mortality. Bifunctional agents that simultaneously antagonize and degrade AR block the AR signaling pathway more completely and exhibit excellent antiproliferative activity against wild-type and drug-resistant prostate cancer cells. Here, we reported the discovery and optimization of a series of biphenyl derivatives as androgen receptor antagonists and degraders. These biphenyl derivatives exhibited potent antiproliferative activity against LNCaP and 22Rv1 cells. Our discoveries enrich the diversity of small molecule AR degraders and offer insights for the development of novel AR degraders for the treatment of enzalutamide-resistant prostate cancer.

RuBi-Ruxolitinib: A Photoreleasable Antitumor JAK Inhibitor.

We describe the synthesis and biological testing of ruthenium-bipyridine ruxolitinib (RuBiRuxo), a photoreleasable form of ruxolitinib, a JAK inhibitor used as an antitumoral agent in cutaneous T-cell lymphomas (CTCL). This novel caged compound is synthesized efficiently, is stable in aqueous solution at room temperature, and is photoreleased rapidly by visible light. Irradiation of RuBiRuxo reduces cell proliferation and induces apoptosis in a light- and time-dependent manner in a CTCL cell line. This effect is specific and is mediated by a decreased phosphorylation of STAT proteins. Our results demonstrate the potential of ruthenium-based photocompounds and light-based therapeutic approaches for the potential treatment of cutaneous lymphomas and other pathologies.

Consecutive high-performance removal of Cu2+ metal ions and Deltamethrin using multifunctional pyrolysis cuttlebone/cotton fabric nanocomposite.

A simple technique was developed for the modification of cotton materials that is inexpensive, environmentally friendly, and very effective. Waste Cotton fabrics (WCFs) are loaded with propolis extract (PE) for Cu2+ removal. Then, Cu2+ underwent a pyrolysis process with modified cuttlebone (CB) at 900 °C for 5 h. The surface of the prepared materials was characterized using X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX), Fourier transform infrared (FTIR), BET, particle sizes, thermogravimetric analysis (TGA) and zeta potential analysis. The Cu2+ metal ions from an aqueous solution were removed using WCFs/PE, and DLM was subsequently removed using pyro WCFs/PE/Cu/CB. The as-prepared NPs exhibited the face-centered cubic structure of WCFs/PE/Cu/CB with crystallite sizes ranging from 386.70 to 653.10 nm. FTIR spectra revealed that CB was present on the surface of the resulting WCFs/PE/Cu. SEM revealed the dispersion of a uniformly flower-like morphology over a large area. Sorption studies were performed based on parameters that included pH, dose, contact time, and initial concentration. The adsorption isotherm and the kinetic studies of the DLM adsorption process were applied at a pH of 5.0 and a temperature of 25 °C using several isotherms and kinetic models. The results revealed qmax (20.51 mg/g) with R2 = 0.97, the Langmuir isotherm that best matches the experimental data. Hence, the Langmuir isotherm suggests that it is the model that best describes sorption on homogenous surfaces or surface-supporting sites with various affinities. The correlation coefficient R2, χ2, adjusted correlation coefficient, and error functions like root mean square (RMSE), normalized root mean square error (NRMES), and mean absolute error (MAE) were used to evaluate the best-fit models to the experimental adsorption data. Moreover, cost estimation for the prepared adsorbent WCFs/PE/Cu showed that it costs approximately 3 USD/g, which is a cheap adsorbent compared to other similar adsorbents reported in the literature. The examined WCFs/PE have significant applicability potential for Cu2+-laden wastewater treatment due to their superior Cu2+ metal ions adsorption capability and reusability. The cytotoxicity and safety study showed that at higher concentrations, it resulted in much less cell viability. Additionally, the removal efficiency of Cu2+ metal ions from synthetic, realistic industrial wastewater using WCFs/PE reached up to 96.29 %, demonstrating good adsorption capability. Thus, there is a huge possibility of accomplishing this and performing well. This study paves the way for the reuse and valorization of selected adsorbents following circular economy principles. Two green metrics were applied, the Analytical Eco-scale and the Analytical GREEnness Calculator (AGREE).