Synergistic nanocoating with layer-by-layer functionalized PCL membranes enhanced by manuka honey and essential oils for advanced wound healing.

Chronic wounds represent a significant global health concern, statistically impacting 1-2% of the population in developed countries throughout their lifetimes. These wounds cause considerable discomfort for patients and necessitate substantial expenditures of time and resources for treatment. Among the emerging therapeutic approaches, medicated dressings incorporating bioactive molecules, including natural compounds, are particularly promising. Hence, the objective of this study was to develop novel antimicrobial dressings for wound treatment. Specifically, polycaprolactone membranes were manufactured using the electrospinning technique and subsequently coated with natural polyelectrolytes (chitosan as a polycation and a mixture of manuka honey with essential oils nanoemulsions as a polyanion) employing the Layer-by-Layer assembly technique. Physico-chemical and morphological characterization was conducted through QCM-D, FTIR-ATR, XPS, and SEM analyses. The results from SEM and QCM-D demonstrated successful layer deposition and coating formation. Furthermore, FTIR-ATR and XPS analyses distinguished among different coating compositions. The coated membranes were tested in the presence of fibroblast cells, demonstrating biocompatibility and expression of genes coding for VEGF, COL1, and TGF-ß1, which are associated with the healing process (assessed through RT-qPCR analysis). Finally, the membranes exhibited excellent antibacterial activity against both Staphylococcus aureus and Pseudomonas aeruginosa, with higher bacterial strain inhibition observed when cinnamon essential oil nanoemulsion was incorporated. Taken together, these results demonstrate the potential application of nanocoated membranes for biomedical applications, such as wound healing.

Novel Cosmetic Ingredient CS-AA Polyion Complex and Skin Moisturizing Effect.

PURPOSE: The study explored the enhanced skin moisturizing capabilities and moisture retention effects achieved by forming a polyion complex using sulfated glycosaminoglycan (GAG), specifically chondroitin sulfate (CS), and amino acids (AA) such as glutamine (Q) and arginine (R). The overall hydration effect of this CS-AA complex was examined. METHODS: After analyzing the CS-AA polyion complex structure using spectroscopic methods, the ex vivo moisture retention ability was assessed under dry conditions using porcine skin samples. Additionally, the efficacy of the CS-AA polyion complex in reducing transepidermal water loss (TEWL) and improving skin hydration was evaluated on human subjects using a digital evaporimeter and a corneometer, respectively. RESULTS: Validating a systematic reduction in particle size, the following order was observed: CS > CS/AA simple mixture > CS-AA complex based on dynamic light scattering (DLS) and transmission electron microscopy (TEM) analysis. Furthermore, observations revealed that the CS-AA complex exhibits negligible surface charge. Additionally, Fourier-transform infrared spectroscopy (FT-IR) analysis demonstrated a distinct peak shift in the complex, confirming the successful formation of the CS-AA complex. Subsequently, the water-holding effect through porcine skin was assessed, revealing a notable improvement in moisture retention (weight loss) for the CS-Q complex: 40.6% (1 h), 20.5% (2 h), and 18.7% (4 h) compared to glycerin. Similarly, the CS-R complex demonstrated enhancements of 50.2% (1 h), 37.5% (2 h), and 33% (4 h) compared to glycerin. Furthermore, TEWL improvement efficacy on human skin demonstrated approximately 25% improvement for both the CS-Q complex and CS-R complex, surpassing the modest 12.5% and 18% improvements witnessed with water and glycerin applications, respectively. Finally, employing a corneometer, hydration changes in the skin were monitored over 4 weeks. Although CS alone exhibited nominal alterations, the CS-Q complex and CS-R complex showed a significant increase in moisture levels after 4 weeks of application. CONCLUSION: In this study, polyion complexes were successfully formed between CS, a sulfated GAG, and AA. Comparisons with glycerin, a well-known moisturizing agent, confirmed that the CS-AA complex exhibits superior moisturizing effects in various aspects. These findings suggest that the CS-AA complex is a more effective ingredient than CS or AA alone in terms of efficacy.

Enhancing cell activities through integration of polyanionic alginate or hyaluronic acid derivatives with triboelectric nanogenerators.

The impact of electrical stimulation has been widely investigated on the wound healing process; however, its practicality is still challenging. This study explores the effect of electrical stimulation on fibroblasts in a culture medium containing different electrically-charged polysaccharide derivatives including alginate, hyaluronate, and chitosan derivatives. For this aim, an electrical stimulation, provided by a zigzag triboelectric nanogenerator (TENG), was exerted on fibroblasts in the presence of polysaccharides' solutions. The analyses showed a significant increase in cell proliferation and an improvement in wound closure (160 % and 90 %, respectively) for the hyaluronate-containing medium by a potential of 3 V after 48 h. In the next step, a photo-crosslinkable hydrogel was prepared based on hyaluronic acid methacrylate (HAMA). Then, the cells were cultured on HAMA hydrogel and treated by an electrical stimulation. Surprisingly, the results showed a remarkable increase in cell growth (280 %) and migration (82 %) after 24 h. Attributed to the electroosmosis phenomenon and an amplified transfer of soluble growth factors, a dramatic promotion was underscored in cell activities. These findings highlight the role of electroosmosis in wound healing, where TENG-based electrical stimulation is combined with bioactive polysaccharide-based hydrogels to promote wound healing.

Development of chitosan/sodium carboxymethyl cellulose-based polyelectrolyte complex of dexamethasone for treatment of anterior uveitis.

Anterior uveitis is one of the most prevalent forms of ocular inflammation caused by infections, trauma, and other idiopathic conditions if not treated properly, it can cause complete blindness. Therefore, this study aimed to formulate and evaluate dexamethasone sodium phosphate (DSP) loaded polyelectrolyte complex (PEC) nanoparticles (NPs) for the treatment of anterior uveitis. DSP-loaded PEC-NPs were formed through complex coacervation by mixing low molecular weight chitosan and the anionic polymer carboxy methyl cellulose (CMC). The formulations were optimized using Box-Behnken design and evaluated the effect of independent variables: Chitosan concentration, CMC concentration, and pH of chitosan solution on the dependent variables: particle size (PS), Polydispersity Index (PDI), pH of the formulation, and % entrapment efficacy (%EE). The PS, PDI, zeta potential, and pH of the optimized formulation were found 451 ± 82.0995 nm, 0.3807 ± 0.1862, +20.33 ± 1.04 mV and 6.8367 ± 0.0737 respectively. The %EE and drug loading of formulation were 61.66 ± 4.2914% and 21.442 ± 1.814% respectively.In vitrodrug release studies of optimized formulation showed the prolonged release up to 12 h whereas, the marketed formulation showed the burst release 85.625 ± 4.3062% in 1 h and 98.1462 ± 3.0921% at 6 h, respectively. Fourier transform infrared studies suggested the effective incorporation of the drug into the PEC-NPs formulation whereas differential scanning calorimetry and x-ray diffraction studies showed the amorphized nature of the drug in the formulation. Transmission electron microscopy study showed self-assembled, nearly spherical, core-shell nanostructures. The corneal permeation study showed higher permeation of the drug from PEC-NPs compared to the marketed formulation. Hen's Eggs test-Chorioallantoic Membrane test of the optimized formulation revealed non-irritant and safe for ocular administration. Therefore, DSP-loaded PEC-NPs are an effective substitute for conventional eye drops due to their ability to increase bioavailability through longer precorneal retention duration and sustained drug release.

Lidocaine HCl-Loaded Polyelectrolyte Complex -Poloxamer Thermoresponsive Hydrogel: In Vitro- In Vivo Anesthetic Evaluations for Tooth Socket Wound Delivery.

Local anesthesia is essential in dental practices, particularly for managing pain in tooth socket wounds, yet improving drug delivery systems remains a significant challenge. This study explored the physicochemical characteristics of lidocaine hydrochloride (LH) incorporated into a polyelectrolyte complex and poloxamer thermosensitivity hydrogel, assessing its local anesthetic efficacy in mouse models and its onset and duration of action as topical anesthetics in clinical trials. The thermoresponsive hydrogel exhibited a rapid phase transition within 1-3 minutes and demonstrated pseudo-plastic flow behavior. Its release kinetics followed Korsmeyer-Peppas, with 50% of biodegradation occurring over 48 h. In mouse models, certain thermogels showed superior anesthetic effects, with rapid onset and prolonged action, as evidenced by heat tolerance in tail-flick and hot plate models. In clinical trials, the LH-loaded thermoresponsive hydrogel provided rapid numbness onset, with anesthesia (Ton) beginning at an average of 46.5 ± 22.5 seconds and lasting effectively (Teff) for 202.5 ± 41.0 seconds, ranging from 120 to 240 seconds, indicating sustained release. These results highlight the promising properties of these formulations: rapid onset, prolonged duration, mucoadhesion, biodegradability, and high anesthesia effectiveness. This study demonstrates the potential for advancing local anesthesia across various medical fields, emphasizing the synergy between material science and clinical applications to improve patient care and safety.

Chitosan-based biopolyelectrolyte complexes intercalated montmorillonite: A strategy for green flame retardant and mechanical reinforcement of polypropylene composites.

Due to dwindling petroleum resources and the need for environmental protection, the development of bio-based flame retardants has received much attention. In order to explore the feasibility of fully biomass polyelectrolyte complexes (PEC) for polyolefin flame retardant applications, chitosan (CS), sodium alginate (SA), and sodium phytate (SP) were used to prepare CS-based fully biomass PEC intercalated montmorillonite (MMT) hybrid biomaterials (SA-CS@MMT and SP-CS@MMT). The effects of two hybrid biomaterials on the fire safety and mechanical properties of intumescent flame-retardant polypropylene (PP) composites were compared. The SP-CS@MMT showed the best flame retardancy and toughening effect at the same addition amount. After adding 5 wt% SP-CS@MMT, the limiting oxygen index (LOI) value of PP5 reached 30.9 %, and the peak heat release rate (pHRR) decreased from 1348 kW/m2 to 163 kW/m2. In addition, the hydrogen bonding between polyelectrolyte complexes significantly improved the mechanical properties of PP composites. Compared with PP2, the tensile strength of PP5 increased by 59 %. This study provided an efficient and eco-friendly strategy for the large-scale production of renewable biomaterials with good thermal stability and expanded the application of macromolecular biomaterials in the field of fire safety.

Anti-Biofilm Effect of Hybrid Nanocomposite Functionalized with Erythrosine B on Staphylococcus aureus Due to Photodynamic Inactivation.

Resistant biofilms formed by Staphylococcus aureus on medical devices pose a constant medical threat. A promising alternative to tackle this problem is photodynamic inactivation (PDI). This study focuses on a polyurethane (PU) material with an antimicrobial surface consisting of a composite based on silicate, polycation, and erythrosine B (EryB). The composite was characterized using X-ray diffraction and spectroscopy methods. Anti-biofilm effectiveness was determined after PDI by calculation of CFU mL-1. The liquid PU precursors penetrated a thin silicate film resulting in effective binding of the PU/silicate composite and the PU bulk phases. The incorporation of EryB into the composite matrix did not significantly alter the spectral properties or photoactivity of the dye. A green LED lamp and laser were used for PDI, while irradiation was performed for different periods. Preliminary experiments with EryB solutions on planktonic cells and biofilms optimized the conditions for PDI on the nanocomposite materials. Significant eradication of S. aureus biofilm on the composite surface was achieved by irradiation with an LED lamp and laser for 1.5 h and 10 min, respectively, resulting in a 10,000-fold reduction in biofilm growth. These results demonstrate potential for the development of antimicrobial polymer surfaces for modification of medical materials and devices.

Incorporation of CuS nanorods in polyelectrolyte multilayer microcapsules improved cancer cell cytotoxicity and signal intensity in ultrasound imaging.

The fabrications of hollow microcapsules (MCs) with new architecture and ability to incorporate different nanomaterials have received great interest for targeted cancer therapy. Recently, CuS based nanomaterials have been demonstrated to possess the ability to mimic Fenton-like activity in tumor environment and inducing cancer cell apoptosis by generating highly reactive oxygen species (ROS). In this study, we have developed poly(allylamine) hydrochloride (PAH)/dextran sulfate (DS) polyelectrolyte MCs capable of carrying doxorubicin (DOX) for targeted cancer therapy and ultrasound imaging. The electron microscopy investigations showed the formation of polymeric MCs of 3 µm in size with incorporated CuS NRs in their interior structure. The surface modification of MCs with folic acid (FA), and encapsulation of model hydrophilic molecules in MCs was studied by UV-Visible (UV-Vis) spectroscopy, Fourier transform infra-red (FTIR) spectroscopy and confocal laser scanning microscopy. The encapsulation efficiency of DOX was found to be 56 % and the release was found to be linear at pH 5.5 and 7.4 in the absence of ultrasound exposure. The ultrasound exposure resulted in sudden rupture of MCs at 1 MHz and 1 W/cm2 and caused burst release of DOX at both pH conditions. The FA decorated PAH/DS/CuS NR MCs exhibited improved anti-cancer activity against MDA-MB-231 cancer cells due to the synergistic effects of ultrasound mediated burst release of chemotherapeutic drug (DOX), glutathione-stimulated ROS and targeted cancer therapy. Further, the capsules showed better echogenicity than that of control PAH/DS MCs when imaged under medical ultrasound-scanning system. Hence, the MCs demonstrated in this study have huge potential for targeted cancer theranostics by offering an option to image the cancer cells during the treatment period.

Conformational Transition of Semiflexible Ring Polyelectrolyte in Tetravalent Salt Solutions: A Simple Numerical Modeling without the Effect of Twisting.

In this work, the conformational behaviors of ring polyelectrolyte in tetravalent salt solutions are discussed in detail through molecular dynamics simulation. For simplification, here we have neglected the effect of the twisting interaction, although it has been well known that both bending and twisting interactions play a deterministic in the steric conformation of a semiflexible ring polymer. The salt concentration CS and the bending energy b take a decisive role in the conformation of the ring polyelectrolyte (PE). Throughout our calculations, the b varies from b = 0 (freely joint chain) to b = 120. The salt concentration CS changes in the range of 3.56 × 10-4 M ≤ CS ≤ 2.49 × 10-1 M. Upon the addition of salt, ring PE contracts at first, subsequently re-expands. More abundant conformations are observed for a semiflexible ring PE. For b = 10, the conformation of semiflexible ring PE shifts from the loop to two-racquet-head spindle, then it condenses into toroid, finally arranges into coil with the increase of CS. As b increases further, four phase transitions are observed. The latter two phase transitions are different. The semiflexible ring PE experiences transformation from toroid to two racquet head spindle, finally to loop in the latter two phase transitions. Its conformation is determined by the competition among the bending energy, cation-bridge, and entropy. Combined, our findings indicate that the conformations of semiflexible ring PE can be controlled by changing the salt concentration and chain stiffness.

Supramolecular assembly of polycation/mRNA nanoparticles and in vivo monocyte programming.

Size-dependent phagocytosis is a well-characterized phenomenon in monocytes and macrophages. However, this size effect for preferential gene delivery to these important cell targets has not been fully exploited because commonly adopted stabilization methods for electrostatically complexed nucleic acid nanoparticles, such as PEGylation and charge repulsion, typically arrest the vehicle size below 200 nm. Here, we bridge the technical gap in scalable synthesis of larger submicron gene delivery vehicles by electrostatic self-assembly of charged nanoparticles, facilitated by a polymer structurally designed to modulate internanoparticle Coulombic and van der Waals forces. Specifically, our strategy permits controlled assembly of small poly(ß-amino ester)/messenger ribonucleic acid (mRNA) nanoparticles into particles with a size that is kinetically tunable between 200 and 1,000 nm with high colloidal stability in physiological media. We found that assembled particles with an average size of 400 nm safely and most efficiently transfect monocytes following intravenous administration and mediate their differentiation into macrophages in the periphery. When a CpG adjuvant is co-loaded into the particles with an antigen mRNA, the monocytes differentiate into inflammatory dendritic cells and prime adaptive anticancer immunity in the tumor-draining lymph node. This platform technology offers a unique ligand-independent, particle-size-mediated strategy for preferential mRNA delivery and enables therapeutic paradigms via monocyte programming.

In situ formed aldehyde-modified hyaluronic acid hydrogel with polyelectrolyte complexes of aldehyde-modified chondroitin sulfate and gelatin: An approach for minocycline delivery.

Polysaccharides like hyaluronan (HA) and chondroitin sulfate (CS) are native of the brain's extracellular matrix crucial for myelination and brain maturation. Despite extensive research on HA and CS as drug delivery systems (DDS), their high water solubility limits their application as drug carriers. This study introduces an injectable DDS using aldehyde-modified hyaluronic acid (HAOX) hydrogel containing polyelectrolyte complexes (PEC) formed with calcium, gelatin, and either CS or aldehyde-modified CS (CSOX) to deliver minocycline for Multiple Sclerosis therapy. PECs with CSOX enable covalent crosslinking to HAOX, creating immobilized PECs (HAOX_PECOX), while those with CS remain unbound (HAOX_PECS). The in situ forming DDS can be administered via a 20 G needle, with rapid gelation preventing premature leakage. The system integrates into an implanted device for minocycline release through either Fickian or anomalous diffusion, depending on PEC immobilization. HAOX_PECOX reduced burst release by 88 %, with a duration of 127 h for 50 % release. The DDS exhibited an elastic modulus of 3800 Pa and a low swelling ratio (0-1 %), enabling precise control of minocycline release kinetics. Released minocycline reduced IL-6 secretion in the Whole Blood Monocytes Activation Test, suggesting that DDS formation may not alter the biological activity of the loaded drug.

Lindqvist-type Polyoxometalates Act as Anti-breast Cancer Drugs via Mitophagy-induced Apoptosis.

OBJECTIVE: Lindqvist-type polyoxometalates (POMs) exhibit potential antitumor activities. This study aimed to examine the effects of Lindqvist-type POMs against breast cancer and the underlying mechanism. METHODS: Using different cancer cell lines, the present study evaluated the antitumor activities of POM analogues that were modified at the body skeleton based on molybdenum-vanadium-centered negative oxygen ion polycondensations with different side strains. Cell colony formation assay, autophagy detection, mitochondrial observation, qRT-PCR, Western blotting, and animal model were used to evaluate the antitumor activities of POMs against breast cancer cells and the related mechanism. RESULTS: MO-4, a Lindqvist-type POM linking a proline at its side strain, was selected for subsequent experiments due to its low half maximal inhibitory concentration in the inhibition of proliferation of breast cancer cells. It was found that MO-4 induced the apoptosis of multiple types of breast cancer cells. Mechanistically, MO-4 activated intracellular mitophagy by elevating mitochondrial reactive oxygen species (ROS) levels and resulting in apoptosis. In vivo, breast tumor growth and distant metastasis were significantly reduced following MO-4 treatment. CONCLUSION: Collectively, the results of the present study demonstrated that the novel Lindqvist-type POM MO-4 may exhibit potential in the treatment of breast cancer.

Cell-penetrating activity of a short-chain ε-poly-l-α-lysine.

Bacteria produce polycationic homopoly(amino acid)s, which are characterized by isopeptide backbones. We previously demonstrated that two representative bacterial polycationic isopeptides, ε-poly-l-α-lysine consisting of 25-35 l-α-lysine residues (ε-PαL25-35) and ε-poly-l-ß-lysine consisting of l-ß-lysine residues (ε-PßL4-13), were internalized into mammalian cells by both energy-independent direct penetration and energy-dependent endocytosis/macropinocytosis, and then diffused throughout the cytosol. In this study, we investigated the cell-penetrating activity of an ε-PαL short-chain derivative consisting of 5-14 l-α-lysine residues (ε-PαL5-14) to gain insight into the relationship between the isopeptide-chain length and the manner of cellular internalization. We prepared a conjugate of ε-PαL5-14 and a fluorescent dye (FAM) by click chemistry, and incubated the resulting polymer, ε-PαL5-14-FAM, with HeLa cells. Unlike ε-PαL25-35-FAM, ε-PαL5-14-FAM was internalized into cells only by energy-dependent endocytosis/macropinocytosis. Furthermore, a high concentration (>50 µM) was required for the internalization events. ε-PαL5-14 has a chain length almost equal to that of the membrane permeable ε-PßL4-13, which can enter cells at low concentrations. Considering that the basicity of the ß-amino group is higher than that of α-amino acid at physiological pH, ε-PßL is expected to have a greater cell-penetrating capacity than ε-PαL, provided their isopeptide-chain lengths are similar, suggesting that a more extended chain derivative of ε-PßL would be more advantageous for cellular internalization of cargo proteins than ε-PαL25-35.

Zwitterionic Polyelectrolyte Complex Vesicles Assembled from Homopoly(2-Oxazoline)s as Enzyme Catalytic Nanoreactors for Potent Anti-Tumor Efficiency.

Enzymes are known for their remarkable catalytic efficiency across a wide range of applications. Here, we present a novel and convenient nanoreactor platform based on zwitterionic polyelectrolyte complex vesicles (PCVs), assembled from oppositely charged homopoly(2-oxazoline)s, facilitating enzyme immobilization. We show remarkable enhancements in catalytic activity and stability by encapsulation of lipase as a model enzyme. Even as the temperature rises, the performance of the lipase remains robust. Further, the structural characteristics of PCVs, including hollow architecture and semipermeable membranes, endow them with unique advantages for enzyme cascade reactions involving glucose oxidase (GOx) and horseradish peroxidase (HRP). A decline in catalytic efficiency is shown when the enzymes are individually loaded and subsequently mixed, in contrast to the coloaded GOx-HRP-PCV group. We demonstrate that the vesicle structures establish confined environments where precise enzyme-substrate interactions facilitate enhanced catalytic efficiency. In addition, the nanoreactors exhibit excellent biocompatibility and efficient anti-tumor activity, which hold significant promise for biomedical applications within enzyme-based technologies.

A polyoxometalate/chitosan-Ti3C2Tx MXene nanocomposite constructed by electrostatically mediated strategy for electrochemical detecting L-tryptophan in milk.

L-tryptophan (L-Trp) is crucial for human metabolism, and its imbalance or deficiency can lead to certain diseases, such as insomnia, depression, and heart disease. Since the body cannot synthesize L-Trp and must obtain it from external sources, accurately monitoring L-Trp levels in food is essential. Herein, a nanocomposite film based on polyoxometalate (P2Mo17V), Ti3C2Tx MXene, and chitosan (Cs) was developed through a green electrostatically mediated layer-by-layer self-assembly strategy for electrochemical detection of L-Trp. The composite film exhibits fast electron transfer and remarkable electrocatalytic performance for L-Trp with a wide linear range (0.1-103 µM), low limit of detection (0.08 µM, S/N = 3), good selectivity, reproducibility, and repeatability. In milk sample, the recoveries of L-Trp were from 95.78% and 104.31%. The P2Mo17V/Cs-Ti3C2Tx electrochemical sensor not only provides exceptional recognition and detection capabilities for L-Trp but also shows significant potential for practical applications, particularly in food safety and quality control.

Chitosan-alginate/R8 ternary polyelectrolyte complex as an oral protein-based vaccine candidate induce effective mucosal immune responses.

Vaccination is the most effective method for preventing infectious diseases. Oral vaccinations have attracted much attention due to the ability to boost intestinal and systemic immunity. The focus of this study was to develop a poly (lactide-co-glycolide) acid (PLGA)-based ternary polyelectrolyte complex (PEC) with chitosan, sodium alginate, and transmembrane peptides R8 for the delivery of antigen proteins. In this study, the antigen protein (HBf), consisting of the Mycobacterium avium subspecies paratuberculosis (MAP) antigens HBHA, Ag85B, and Bfra, was combined with R8 to generate self-assembled conjugates. The results showed that PEC presented a cross-linked reticular structure to protect the encapsulated proteins in the simulated gastric fluid. Then, the nanocomposite separated into individual nanoparticles after entering the simulated intestinal fluid. The ternary PEC with R8 promoted the in vivo uptake of antigens by intestinal lymphoid tissue. Moreover, the ternary PEC administered orally to mice promoted the secretion of specific antibodies and intestinal mucosal IgA. In addition, in the mouse models of MAP infection, the ternary PEC enhanced splenic T cell responses, thus reducing bacterial load and liver pathology score. These results suggested that this ternary electrolyte complex could be a promising delivery platform for oral subunit vaccine candidates, not limited to MAP infection.

Compaction, Relaxation, and Linearization of Megadalton-Sized DNA Plasmids: DNA Structures Probed by CD-MS.

High purity plasmid DNA is a raw material for recombinant protein production as well as an active ingredient in DNA vaccines. There are four primary plasmid structures that can be observed in a typical plasmid formulation: supercoiled, relaxed (circular), linearized, and condensed. Determining what structures are present in a sample is important, as the structure can affect activity; the supercoiled structure has the highest activity, and >90% supercoiled is desired for industry standards. Recently, charge detection mass spectrometry (CD-MS) was used to distinguish two of the structures, supercoiled and condensed, by measuring the charge deposited on the ions by positive mode electrospray. Here, CD-MS is used to probe the structures of DNA plasmids during compaction with polycations, and through enzymatic treatment to relax and linearize plasmids. We find that all four structural types for plasmid DNA have unique charging profiles that can be distinguished using CD-MS. The extent of mechanical shearing of the DNA plasmids during electrospray is strongly influenced by the structural type.

Biodegradable Microembolics with Nanografted Polyanions Enable High-Efficiency Drug Loading and Sustained Deep-Tumor Drug Penetration for Locoregional Chemoembolization Treatment.

Transarterial chemoembolization (TACE), the mainstay treatment of unresectable primary liver cancer that primarily employs nondegradable drug-loaded embolic agents to achieve synergistic vascular embolization and locoregional chemotherapy effects, suffers from an inferior drug burst behavior lacking long-term drug release controllability that severely limits the TACE efficacy. Here we developed gelatin-based drug-eluting microembolics grafted with nanosized poly(acrylic acid) serving as a biodegradable ion-exchange platform that leverages a counterion condensation effect to achieve high-efficiency electrostatic drug loading with electropositive drugs such as doxorubicin (i.e., drug loading capacity >34 mg/mL, encapsulation efficiency >98%, and loading time <10 min) and an enzymatic surface-erosion degradation pattern (∼2 months) to offer sustained locoregional pharmacokinetics with long-lasting deep-tumor retention capability for TACE treatment. The microembolics demonstrated facile microcatheter deliverability in a healthy porcine liver embolization model, superior tumor-killing capacity in a rabbit VX2 liver cancer embolization model, and stabilized extravascular drug penetration depth (>3 mm for 3 months) in a rabbit ear embolization model. Importantly, the microembolics finally exhibited vessel remodeling-induced permanent embolization with minimal inflammation responses after complete degradation. Such a biodegradable ion-exchange drug carrier provides an effective and versatile strategy for enhancing long-term therapeutic responses of various local chemotherapy treatments.

A photothermal surface modified with polyelectrolyte multilayers for gene transfection and cell harvest.

Gene transfection, which involves introducing nucleic acids into cells, is a pivotal technology in the life sciences and medical fields, particularly in gene therapy. Surface-mediated transfection, primarily targeting cells adhering to surfaces, shows promise for enhancing cell transfection by localizing and presenting surface-bound nucleic acids directly to the cells. However, optimizing endocytosis for efficient delivery remains a persistent challenge. Additionally, ensuring efficient and non-traumatic cell harvest capability is crucial for applications such as ex vivo cell-based therapy. To address these challenges, we developed a photothermal platform with enzymatic degradation capability for efficient gene transfection and cell harvest. This platform is based on carbon nanotubes (CNTs) doped with poly(dimethylsiloxane) and modified with polyelectrolyte multilayers (PEMs) containing hyaluronic acid and quaternized chitosan, allowing for substantial loading of poly(ethyleneimine)/plasmid DNA (pDNA) complexes through electrostatic interactions. Upon irradiation of near-infrared laser, the photothermal properties of CNTs enable high transfection efficiency by delivering pDNA into attached cells via a membrane disruption mechanism. The engineered cells can be harvested by treating with a non-toxic hyaluronidase solution to degrade PEMs, thus maintaining good viability for further applications. This platform has demonstrated remarkable efficacy across various cell lines (including Hep-G2 cells, Ramos cells and primary T cells), achieving a transfection efficiency exceeding 95 %, cell viability exceeding 90 %, and release efficiency surpassing 95 %, highlighting its potential for engineering living cells.

Preparation of photothermal alginate/chitosan derivative/CuS@polydopamine composite fibers and application in desalination.

A polyelectrolyte system consisting of sodium alginate (SA) and quaternary ammonium chitosan (QAC) blended with polydopamine-coated copper sulfide particles (CuS@PDA) was chosen to investigate the function of CuS@PDA in the uniform binary blending of anionic and cationic polyelectrolytes in detail. A smart composite fiber SA/QAC/CuS@PDA was prepared via a dry-wet spinning technique. With the addition of CuS@PDA (about 4.3 % in fiber), the as-prepared SA/QAC/CuS@PDA-0.50 fibers (SQCuS@P-0.50 SCFs) showed notably enhanced intensity 359.2 MPa, excellent moisture response, and photothermal conversion performance, with the temperature increasing from 25.9 to 80.7 °C as irradiated under a 980 nm infrared lamp at distance 20 cm away for 120 s. The photothermal performance was maintained after 6 lighting on-and-off cycles. The tensile strength decreased ~23.8 % after 4 cycles, then remained fixed. The diameter increases to ~480 % in wet state but decreases to the original size in dry state for 10 cycles. When the fabric with 90 wt% SQCuS@P-0.50 SCFs was used as a water evaporator, the water evaporation rate and efficiency were 1.68 kg·m-2·h-1 and 102 % under 1 sun irradiation. This work provides a simple and ecofriendly strategy for fabricating photothermal fabrics by designing and preparing composite fibers.