One-step enrichment and stepwise elution of glycoproteins and phosphoproteins by hydrophilic Ti4+-immobilized dendrimer poly(glycidyl methacrylate) microparticles functionalized with polyethylenimine and phytic acid.

Glycosylation and phosphorylation rank as paramount post-translational modifications, and their analysis heavily relies on enrichment techniques. In this work, a facile approach was developed for the one-step simultaneous enrichment and stepwise elution of glycoproteins and phosphoproteins. The core of this approach was the application of the novel titanium (IV) ion immobilized poly(glycidyl methacrylate) microparticles functionalized with dendrimer polyethylenimine and phytic acid. The microparticles possessed dual enrichment capabilities due to their abundant titanium ions and hydroxyl groups on the surface. They demonstrate rapid adsorption equilibrium (within 30 min) and exceptional adsorption capacity for ß-casein (1107.7 mg/g) and horseradish peroxidase (438.6 mg/g), surpassing that of bovine serum albumin (91.7 mg/g). Furthermore, sodium dodecyl sulfate-polyacrylamide gel electrophoresis was conducted to validate the enrichment capability. Experimental results across various biological samples, including standard protein mixtures, non-fat milk, and human serum, demonstrated the remarkable ability of these microparticles to enrich low-abundance glycoproteins and phosphoproteins from biological samples.

Lingzhi or Reishi Medicinal Mushroom Ganoderma lucidum (Agaricomycetes) Nanogel in a Complete Freund's Adjuvant-Induced Rheumatoid Arthritis Rat Model: Anti-Arthritic, Anti-Inflammatory, and Antioxidative Activity.

Lingzhi or reishi mushroom, Ganoderma lucidum, is a medicinal mushroom quite widely developed as herbal medicine because it has acted as an anticancer, antitumor, antioxidant, and anti-inflammatory. The active mycochemical compounds of G. lucidum mushrooms, such as flavonoids and polysaccharides, can suppress the release of pro-inflammatory cytokines and prevent lipid peroxidation due to oxidative stress. Rheumatoid arthritis (RA) is an autoimmune disease where the exact cause is unknown, and RA prevalence continues to increase yearly. In patients with RA, joint damage and inflammation occur. This study aims to evaluate the effectiveness of G. lucidum nanogels as anti-arthritis, anti-inflammatory, and antioxidative. The research method was a true experiment using a control group and treatment group that randomly assigned, using 24 male Wistar rats (Rattus norvegicus) induced with complete Freund's adjuvant (CFA) 0.1 mL. The rats were divided into six groups; healthy control/HCt (did not receive the treatment), negative control/NCt (induced by CFA), and positive control/PCt (given 0.012 diclofenac sodium). TG1 (given 250 mg G. lucidum nanogels), TG2 (given 500 mg G. lucidum nanogels), TG3 (given 750 mg G. lucidum nanogels). IgG, eNOS, IL-1ß, COX-2, NOS, TNF-α, and IL-6 parameters were measured using ELISA, and the data obtained were analyzed by one-way ANOVA using SPSS (P < 0.05). The results showed that administering G. lucidum nanogels significantly reduced IgG, NOS, TNF-α, COX-2, IL-1ß, and IL-6 and increased eNOS levels. The anti-inflammatory and antioxidative activities in suppressing pro-inflammatory cytokines and increasing eNOS levels prove that the nanogel extract G. lucidum have the potential to be developed as anti-arthritis natural therapeutic.

A black phosphorus nanosheet-based RNA delivery system for prostate cancer therapy by increasing the expression level of tumor suppressor gene PTEN via CeRNA mechanism.

BACKGROUND: Prostate cancer (PCa) has a high incidence in men worldwide, and almost all PCa patients progress to the androgen-independent stage which lacks effective treatment measures. PTENP1, a long non-coding RNA, has been shown to suppress tumor growth through the rescuing of PTEN expression via a competitive endogenous RNA (ceRNA) mechanism. However, PTENP1 was limited to be applied in the treatment of PCa for the reason of rapid enzymatic degradation, poor intracellular uptake, and excessively long base sequence to be synthesized. Considering the unique advantages of artificial nanomaterials in drug loading and transport, black phosphorus (BP) nanosheet was employed as a gene-drug carrier in this study. RESULTS: The sequence of PTENP1 was adopted as a template which was randomly divided into four segments with a length of about 1000 nucleotide bases to synthesize four different RNA fragments as gene drugs, and loaded onto polyethyleneimine (PEI)-modified BP nanosheets to construct BP-PEI@RNA delivery platforms. The RNAs could be effectively delivered into PC3 cells by BP-PEI nanosheets and elevating PTEN expression by competitive binding microRNAs (miRNAs) which target PTEN mRNA, ultimately exerting anti-tumor effects. CONCLUSIONS: Therefore, this study demonstrated that BP-PEI@RNAs is a promising gene therapeutic platform for PCa treatment.

Nonviral Platform for Expression of Recombinant Protein in Insect Cells.

Nonviral transfection has been used to express various recombinant proteins, therapeutics, and virus-like particles (VLP) in mammalian and insect cells. Virus-free methods for protein expression require fewer steps for obtaining protein expression by eliminating virus amplification and measuring the infectivity of the virus. The nonviral method uses a nonlytic plasmid to transfect the gene of interest into the insect cells instead of using baculovirus, a lytic system. In this chapter, we describe one of the transfection methods, which uses polyethyleneimine (PEI) as a DNA delivery material into the insect cells to express the recombinant protein in both adherent and suspension cells.

Harnessing Redox Polymer Dynamics for Enhanced Glucose-Oxygen Coupling in Dual Biosensing and Therapeutic Applications.

The burgeoning field of continuous glucose monitoring (CGM) for diabetes management faces significant challenges, particularly in achieving precise and stable biosensor performance under changing environmental conditions such as varying glucose concentrations and O2 levels. To address this, we present a novel biosensor based on the electroless coupling of glucose oxidation catalyzed by flavin-dependent glucose dehydrogenase (FAD-GDH) and O2 reduction catalyzed by bilirubin oxidase (BOD) via a redox polymer, dimethylferrocene-modified linear poly(ethylenimine), FcMe2-LPEI. Initial cyclic voltammetry tests confirm the colocalization of both enzymatic reactions within the potential range of the polymer, indicating an effective electron shuttle mechanism. As a result, we created a hybrid biosensor that operates at open-circuit potential (OCP). It can detect glucose concentrations of up to 100 mM under various O2 conditions, including ambient air. This resulted from optimizing the enzyme ratio to 120 ± 10 mUBOD·UFAD-GDH-1·atmO2-1. This biosensor is highly sensitive, a crucial feature for CGM applications. This distinguishes it from FAD-GDH traditional biosensors, which require a potential to be applied to measure glucose concentrations up to 30 mM. In addition, this biosensor demonstrates the ability to function as a noninvasive, external device that can adapt to changing glucose levels, paving the way for its use in diabetes care and, potentially, personalized healthcare devices. Furthermore, by leveraging the altered metabolic pathways in tumor cells, this system architecture opened up new avenues for targeted glucose scavenging and O2 reduction in cancer therapy.

Polyethyleneimine-mediated assembly of DNA nanotubes for KRAS siRNA delivery in lung adenocarcinoma therapy.

Self-assembled DNA nanostructures hold great promise in biosensing, drug delivery and nanomedicine. Nevertheless, challenges like instability and inefficiency in cellular uptake of DNA nanostructures under physiological conditions limit their practical use. To tackle these obstacles, this study proposes a novel approach that integrates the cationic polymer polyethyleneimine (PEI) with DNA self-assembly. The hypothesis is that the positively charged linear PEI can facilitate the self-assembly of DNA nanostructures, safeguard them against harsh conditions and impart them with the cellular penetration characteristic of PEI. As a demonstration, a DNA nanotube (PNT) was successfully synthesized through PEI mediation, and it exhibited significantly enhanced stability and cellular uptake efficiency compared to conventional Mg2+-assembled DNA nanotubes. The internalization mechanism was further found to be both clathrin-mediated and caveolin-mediated endocytosis, influenced by both PEI and DNA. To showcase the applicability of this hybrid nanostructure for biomedical settings, the KRAS siRNA-loaded PNT was efficiently delivered into lung adenocarcinoma cells, leading to excellent anticancer effects in vitro. These findings suggest that the PEI-mediated DNA assembly could become a valuable tool for future biomedical applications.

From Bone Remodeling to Wound Healing: An miR-146a-5p-Loaded Nanocarrier Targets Endothelial Cells to Promote Angiogenesis.

Wound healing is a complex challenge that demands urgent attention in the clinical realm. Efficient angiogenesis is a pivotal factor in promoting wound healing. microRNA-146a (miR-146a) inhibitor has angiogenic potential in the periodontal ligament. However, free microRNAs (miRNAs) are poorly delivered into cells due to their limited tissue specificity and low intracellular delivery efficiency. To address this hurdle, we developed a nanocarrier for targeted delivery of the miR-146a inhibitor into endothelial cells. It is composed of a polyethylenimine (PEI)-modified mesoporous silica nanoparticle (MSN) core and a pentapeptide (YIGSR) layer that recognizes endothelial cells. In vitro, we defined that the miR-146a inhibitor and adiponectin (ADP) can modulate angiogenesis and the remodeling of periodontal tissues by activating the ERK and Akt signaling pathways. Then, we confirm the specificity of YIGSR to endothelial cells, and importantly, the nanocarrier effectively delivers the miR-146a inhibitor into endothelial cells, promoting angiogenesis. In a C57 mouse skin wound model, the miR-146a inhibitor is successfully delivered into endothelial cells at the wound site using the nanocarrier, resulting in the formation of new blood vessels with strong CD31 expression. Additionally, no significant differences are found in the expression levels of inflammatory markers interleukin-6 and tumor necrosis factor-α. This outcome not only brings new strategies for angiogenesis but also exhibits broader implications for bone remodeling and wound healing. The breakthrough holds significance for future research and clinical interventions.

The preparation and dual-mode detection of ascorbic acid based on poly(N-isopropylacrylamide) nanogel with oxidase-like activity.

Nanozymes have recently become a research hotspot because of the advantages of good stability, excellent catalytic performance and easy storage in comparison to natural enzymes. Nanozymes with oxidase-like activity get special attention because they needn't the participation of hydrogen peroxide. In this paper, poly(N-isopropylacrylamide) nanogel with oxidase-like activity was synthesized for the first time. The catalytic mechanism was explored by EPR and UV spectroscopy after adding specific trapping agents of ROS, and the results showed that PNIPAM NG can catalyze O2 to 1O2. In the presence of PNIPAM NG, o-phenylenediamine (OPD) and ascorbic acid (AA) can be oxidized to 2,3-diaminophenazine (oxOPD) and dehydroascorbic acid (DHA), and DHA can further react with OPD to produce a fluorescence substance. The colorimetric and fluorescence detection platforms for AA were constructed based on the above principles. Both platforms have satisfactory results in real samples. The fluorescence platform has better sensitivity and selectivity than the colorimetric platform.

Flexible cellulose nanofiber aerogel with enhanced porous structure and its applications in copper(II) removal.

In order to achieve an aerogel with both rigid pore structures and desired flexibility, stiff carboxyl-functionalized cellulose nanofiber (CNFs) were introduced into a flexible polyvinyl alcohol-polyethyleneimine (PVA-PEI) crosslinking network, with 4-formylphenylboronic acid (4FPBA) bridging within the PVA-PEI network to enable dynamic boroxine and imine bond formation. The strong covalent bonds and hydrogen connections between CNF and the crosslinking network enhanced the wet stability of the aerogel while also contributed to its thermal stability. Importantly, the harmonious coordination between the stiff CNF and the flexible polymer chains not only facilitated aerogel flexibility but also enhanced its increased specific surface area by improving pore structure. Moreover, the inclusion of CNF enhanced the adsorption capacity of the aerogel, rendering it effective for removing heavy metal ions. The specific surface area and adsorption capacity for copper ions of the aerogel increased significantly with a 3 wt% addition CNF suspension, reaching 19.74 m2 g-1 and 60.28 mg g-1, respectively. These values represent a remarkable increase of 590.21 % and 213.96 %, respectively, compared to the blank aerogel. The CNF-enhanced aerogel in this study, characterized by its well-defined pore structures, and desired flexibility, demonstrates versatile applicability across multiple domains, including environmental protection, thermal insulation, electrode fabrication, and beyond.

Effect of molecular weight of PEI on the strength and hydrophobic performance of fiber-based papers via PEI-KH560 surface sizing.

In recent years, researchers have put much attention on the improvements and upgrades of novel wet strength agent in the papermaking fields, especially in the usage of household paper. Herein, PEIM-KH560 by polyethyleneimine (PEI) and γ-glycidyl ether propyl trimethoxysilane (KH560) was synthesized with five molecular weights (Mw) of PEI at 600, 1800, 10,000, 70,000 and 750,000. Results showed that the molecular weight greatly influenced the physicochemical properties of PEI-KH560, such as the size and thermal stability. The intrinsic cationic charge of PEI-KH560 provided the bonding sites with the paper fibers, forming strengthened fiber-fiber joints. It was shown that the dry, wet strength and hydrophobicity of cellulosic paper sheets were obviously improved. When the m (PEI):m(KH560) is 1:2, the strength of papers after sizing by Mw of PEI at 600 and 1800 is the most obvious, with the dry strength increased by 227.9 % and 187.5 %, and the wet strength increased by 183.8 % and 207.8 %, respectively. The maximum hydrophobicity was found at the PEI1800-KH560 with the contact angle value of 130.6°. The resultant environmental-friendly agent (PEI-KH560) obtained in this work provides valuable significance for the preparation of household and food packaging paper.

Bacterial cellulose microfilament biochar-architectured chitosan/polyethyleneimine beads for enhanced tetracycline and metronidazole adsorption.

This study investigates the potential applications of incorporating 2D bacterial cellulose microfibers (BCM) biochar into chitosan/polyethyleneimine beads as a semi-natural sorbent for the efficient removal of tetracycline (TET) and metronidazole (MET) antibiotics. Batch adsorption experiments and characterization techniques evaluate removal performance and synthesized adsorbent properties. The adsorbent eliminated 99.13 % and 90 % of TET and MET at a 10 mg.L-1 concentration with optimal pH values of 8 and 6, respectively, for 90 min. Under optimum conditions and a 400 mg.L-1 concentration, MET and TET have possessed the maximum adsorption capacities of 691.325 and 960.778 mg.g-1, respectively. According to the isothermal analysis, the adsorption of TET fundamentally follows the Temkin (R2 = 0.997), Redlich-Peterson (R2 = 0.996), and Langmuir (R2 = 0.996) models. In contrast, the MET adsorption can be described by the Langmuir (R2 = 0.997), and Toth (R2 = 0.991) models. The pseudo-second-order (R2 = 0.998, 0.992) and Avrami (R2 = 0.999, 0.999) kinetic models were well-fitted with the kinetic results for MET and TET respectively. Diffusion models recommend that pore, liquid-film, and intraparticle diffusion govern the rate of the adsorption process. The developed semi-natural sorbent demonstrated exceptional adsorption capacity over eleven cycles due to its porous bead structure, making it a potential candidate for wastewater remediation.

Near-Infrared Light-Triggered NO Nanogenerator for Gas-Enhanced Photodynamic Therapy and Low-Temperature Photothermal Therapy to Eliminate Biofilms.

Purpose: Owing to its noninvasive nature, broad-spectrum effectiveness, minimal bacterial resistance, and high efficiency, phototherapy has significant potential for antibiotic-free antibacterial interventions and combating antibacterial biofilms. However, finding effective strategies to mitigate the detrimental effects of excessive temperature and elevated concentrations of reactive oxygen species (ROS) remains a pressing issue that requires immediate attention. Methods: In this study, we designed a pH-responsive cationic polymer sodium nitroside dihydrate/branched polyethylenimine-indocyanine green@polyethylene glycol (SNP/PEI-ICG@PEG) nanoplatform using the electrostatic adsorption method and Schiff's base reaction. Relevant testing techniques were applied to characterize and analyze SNP/PEI-ICG@PEG, proving the successful synthesis of the nanomaterials. In vivo and in vitro experiments were performed to evaluate the antimicrobial properties of SNP/PEI-ICG@PEG. Results: The morphology and particle size of SNP/PEI-ICG@PEG were observed via TEM. The zeta potential and UV-visible (UV-vis) results indicated the synthesis of the nanomaterials. The negligible cytotoxicity of up to 1 mg/mL of SNP/PEI-ICG@PEG in the presence or absence of light demonstrated its biosafety. Systematic in vivo and in vitro antimicrobial assays confirmed that SNP/PEI-ICG@PEG had good water solubility and biosafety and could be activated by near-infrared (NIR) light and synergistically treated using four therapeutic modes, photodynamic therapy (PDT), gaseous therapy (GT), mild photothermal therapy (PTT, 46 °C), and cation. Ultimately, the development of Gram-positive (G+) Staphylococcus aureus (S. aureus) and Gram-negative (G-) Escherichia coli (E. coli) were both completely killed in the free state, and the biofilm that had formed was eliminated. Conclusion: SNP/PEI-ICG@PEG demonstrated remarkable efficacy in achieving controlled multimodal synergistic antibacterial activity and biofilm infection treatment. The nanoplatform thus holds promise for future clinical applications.

Intestinal Targeted Nanogel with Broad-Spectrum Autonomous ROS Scavenging Performance for Enhancing the Bioactivity of trans-Resveratrol.

Introduction: To improve the bioavailability of trans-resveratrol (trans-Res), it is commonly co-delivered with antioxidant bioactives using a complex synthetic intestinal targeted carrier, however, which makes practical application challenging. Methods: A nanogel (Ngel), as broad-spectrum autonomous ROS scavenger, was prepared using selenized thiolated sodium alginate (TSA-Se) and crosslinked with calcium lactate (CL) for loading trans-Res to obtain Ngel@Res, which maintained spherical morphology in the upper digestive tract but broke down in the lower digestive tract, resulting in trans-Res release. Results: Under protection of Ngel, trans-Res showed enhanced stability and broad-spectrum ROS scavenging activity. The synergistic mucoadhesion of Ngel prolonged the retention time of trans-Res in the intestine. Ngel and Ngel@Res increased the lifespan of Caenorhabditis elegans to 26.00 ± 2.17 and 26.00 ± 4.27 days by enhancing the activity of antioxidases, upregulating the expression of daf-16, sod-5 and skn-1, while downregulating the expression of daf-2 and age-1. Conclusion: This readily available, intestinal targeted selenized alginate-based nanogel effectively improves the bioactivity of trans-Res.

Size and Surface Properties of Functionalized Organosilica Particles Impact Cell-Particle Interactions Including Mitochondrial Activity.

Understanding of the interactions between macrophages and multifunctional nanoparticles is important for development of novel macrophage-based immunotherapies. Here, we investigated the effects of fluorescent thiol-organosilica particle size and surface properties on cell-particle interactions, including mitochondrial activity, using the mouse macrophage cell line J774A.1. Three different sizes of thiol-organosilica particles (150, 400, and 680 nm in diameter) containing fluorescein (OS/F150, OS/F400, and OS/F680) and particles surface functionalized with polyethylenimine (PEI) (OS/F150PEI, OS/F400PEI, and OS/F680PEI) were prepared. Flow cytometric analysis, time-lapse imaging, and single-cell analysis of particle uptake and mitochondrial activity of J774A.1 cells demonstrated variations in uptake and kinetics depending on the particle size and surface as well as on each individual cell. Cells treated with OS/F150 and OS/F150PEI showed higher uptake and mitochondrial activity than those treated with other particles. The interaction between endosomes and mitochondria was observed using 3D fluorescent imaging and was characterized by the involvement of iron transport into mitochondria by iron-containing proteins adsorbed on the particle surface. Scanning electron microscopy of the cells treated with the particles revealed alterations in cell membrane morphology, depending on particle size and surface. We performed correlative light and electron microscopy combined with time-lapse and 3D imaging to develop an integrated correlation analysis of particle uptake, mitochondrial activity, and cell membrane morphology in single macrophages. These cell-specific characteristics of macrophages against functional particles and their evaluation methods are crucial for understanding the immunological functions of individual macrophages and developing novel immunotherapies.

Red Blood Cell-Hitchhiking Delivery of Simvastatin to Relieve Acute Respiratory Distress Syndrome.

Purpose: The purpose of this study is to address the high mortality and poor prognosis associated with Acute Respiratory Distress Syndrome (ARDS), conditions characterized by acute and progressive respiratory failure. The primary goal was to prolong drug circulation time, increase drug accumulation in the lungs, and minimize drug-related side effects. Methods: Simvastatin (SIM) was used as the model drug in this study. Employing a red blood cell surface-loaded nanoparticle drug delivery technique, pH-responsive cationic nanoparticles loaded with SIM were non-covalently adsorbed onto the surface of red blood cells (RBC), creating a novel drug delivery system (RBC@SIM-PEI-PPNPs). Results: The RBC@SIM-PEI-PPNPs delivery system effectively extended the drug's circulation time, providing an extended therapeutic window. Additionally, this method substantially improved the targeted accumulation of SIM in lung tissues, thereby enhancing the drug's efficacy in treating ARDS and impeding its progression to ARDS. Crucially, the system showed a reduced risk of adverse drug reactions. Conclusion: RBC@SIM-PEI-PPNPs demonstrates promise in ARDS and ARDS treatment. This innovative approach successfully overcomes the limitations associated with SIM's poor solubility and low bioavailability, resulting in improved therapeutic outcomes and fewer drug-related side effects. This research holds significant clinical implications and highlights its potential for broader application in drug delivery and lung disease treatment.

Layer-by-layer fabrication of alginate/polyethyleneimine multilayer on magnetic interface with enhanced efficiency in immuno-capturing circulating tumor cells.

BACKGROUND: The technology of capturing circulating tumor cells (CTCs) plays a crucial role in the diagnosis, evaluation of therapeutic efficacy, and prediction of prognosis in lung cancer. However, the presence of complex blood environment often results in severe nonspecific protein adsorption and interferences from blood cells, which negatively impacts the specificity of CTCs capture. There is a great need for development of novel nanomaterials for CTCs capture with prominent anti-nonspecific adsorptions from proteins or blood cells. RESULTS: We present a novel immune magnetic probe Fe3O4@(PEI/AA)4@Apt. The surface of Fe3O4 particles was modified with four layers of PEI/AA composite by layer-by-layer assembly. Furthermore, aptamers targeting epithelial marker EpCAM (SYL3C) and mesenchymal marker CSV (ZY5C) were simultaneously connected on Fe3O4@(PEI/AA)4 to improve the detection of different phenotypic CTCs and reduce false negatives. The results demonstrated that the (PEI/AA)4 coatings not only minimized non-specific protein adsorptions, but also significantly reduced the adsorption rate of red blood cells to a mere 1 %, as a result of which, the Fe3O4@(PEI/AA)4@Apt probe achieved a remarkably high capture efficiency toward CTCs (95.9 %). In the subsequent validation of clinical samples, the probe was also effective in capturing rare CTCs from lung cancer patients. SIGNIFICANCE AND NOVELTY: A (PEI/AA) polymerized composite with controllable layers was fabricated by layer-by-layer self-assembly technique, which displayed remarkable anti-nonspecific adsorption capabilities toward proteins and cells. Importantly, Fe3O4@(PEI/AA)4@Apt probe significantly improved CTCs capture purity in lung cancer patients to 89.36 %. For the first time, this study combined controllable (PEI/AA) layers with magnetic separation to innovatively build a resistant interface that significantly improves the specific capture performances of CTCs, broadening the application of this polymerized composite.

Effects of Fe(III) on the formation and toxicity alteration of halonitromethanes, dichloroacetonitrile, and dichloroacetamide from polyethyleneimine during UV/chlorine disinfection.

Trace iron ions (Fe(III)) are commonly found in water and wastewater, where free chlorine is very likely to coexist with Fe(III) affecting the disinfectant's stability and N-DBPs' fate during UV/chlorine disinfection, and yet current understanding of these mechanisms is limited. This study investigates the effects of Fe(III) on the formation and toxicity alteration of halonitromethanes (HNMs), dichloroacetonitrile (DCAN), and dichloroacetamide (DCAcAm) from polyethyleneimine (PEI) during UV/chlorine disinfection. Results reveal that the maxima concentrations of HNMs, DCAN, and DCAcAm during UV/chlorine disinfection with additional Fe(III) were 1.39, 1.38, and 1.29 times higher than those without additional Fe(III), instead of being similar to those of Fe(III) inhibited the formation of HNMs, DCAN and DCAcAm during chlorination disinfection. Meanwhile, higher Fe(III) concentration, acidic pH, and higher chlorine dose were more favorable for forming HNMs, DCAN, and DCAcAm during UV/chlorine disinfection, which were highly dependent on the involvement of HO· and Cl·. Fe(III) in the aquatic environment partially hydrolyzed to the photoactive Fe(III)­hydroxyl complexes Fe(OH)2+ and [Fe(H2O)6]3+, which undergone UV photoactivation and coupling reactions with HOCl to achieve effective Fe(III)/Fe(II) interconversion, a process that facilitated the sustainable production of HO·. Extensive product analysis and comparison verified that the HO· production enhanced by the Fe(III)/Fe(II) internal cycle played a primary role in increasing HNMs, DCAN, and DCAcAm productions during UV/chlorine disinfection. Note that the incorporation of Fe(III) increased the cytotoxicity and genotoxicity of HNMs, DCAN, and DCAcAm formed during UV/chlorine disinfection, and yet Fe(III) did not have a significant effect on the acute toxicity of water samples before, during, and after UV/chlorine disinfection. The new findings broaden the knowledge of Fe(III) affecting HNMs, DCAN, and DCAcAm formation and toxicity alteration during UV/chlorine disinfection.

Hybrid Nanogel Drug Delivery Systems: Transforming the Tumor Microenvironment through Tumor Tissue Editing.

The future of drug delivery offers immense potential for the creation of nanoplatforms based on nanogels. Nanogels present a significant possibility for pharmaceutical advancements because of their excellent stability and effective drug-loading capability for both hydrophobic and hydrophilic agents. As multifunctional systems, composite nanogels demonstrate the capacity to carry genes, drugs, and diagnostic agents while offering a perfect platform for theranostic multimodal applications. Nanogels can achieve diverse responsiveness and enable the stimuli-responsive release of chemo-/immunotherapy drugs and thus reprogramming cells within the TME in order to inhibit tumor proliferation, progression, and metastasis. In order to achieve active targeting and boost drug accumulation at target sites, particular ligands can be added to nanogels to improve the therapeutic outcomes and enhance the precision of cancer therapy. Modern "immune-specific" nanogels also have extra sophisticated tumor tissue-editing properties. Consequently, the introduction of a multifunctional nanogel-based drug delivery system improves the targeted distribution of immunotherapy drugs and combinational therapeutic treatments, thereby increasing the effectiveness of tumor therapy.

Tumor-specific enhanced NIR-II photoacoustic imaging via photothermal and low-pH coactivated AuNR@PNIPAM-VAA nanogel.

BACKGROUND: Properly designed second near-infrared (NIR-II) nanoplatform that is responsive tumor microenvironment can intelligently distinguish between normal and cancerous tissues to achieve better targeting efficiency. Conventional photoacoustic nanoprobes are always "on", and tumor microenvironment-responsive nanoprobe can minimize the influence of endogenous chromophore background signals. Therefore, the development of nanoprobe that can respond to internal tumor microenvironment and external stimulus shows great application potential for the photoacoustic diagnosis of tumor. RESULTS: In this work, a low-pH-triggered thermal-responsive volume phase transition nanogel gold nanorod@poly(n-isopropylacrylamide)-vinyl acetic acid (AuNR@PNIPAM-VAA) was constructed for photoacoustic detection of tumor. Via an external near-infrared photothermal switch, the absorption of AuNR@PNIPAM-VAA nanogel in the tumor microenvironment can be dynamically regulated, so that AuNR@PNIPAM-VAA nanogel produces switchable photoacoustic signals in the NIR-II window for tumor-specific enhanced photoacoustic imaging. In vitro results show that at pH 5.8, the absorption and photoacoustic signal amplitude of AuNR@PNIPAM-VAA nanogel in NIR-II increases up obviously after photothermal modulating, while they remain slightly change at pH 7.4. Quantitative calculation presents that photoacoustic signal amplitude of AuNR@PNIPAM-VAA nanogel at 1064 nm has ~ 1.6 folds enhancement as temperature increases from 37.5 °C to 45 °C in simulative tumor microenvironment. In vivo results show that the prepared AuNR@PNIPAM-VAA nanogel can achieve enhanced NIR-II photoacoustic imaging for selective tumor detection through dynamically responding to thermal field, which can be precisely controlled by external light. CONCLUSIONS: This work will offer a viable strategy for the tumor-specific photoacoustic imaging using NIR light to regulate the thermal field and target the low pH tumor microenvironment, which is expected to realize accurate and dynamic monitoring of tumor diagnosis and treatment.

Sodium alginate based adsorbent: Facile fabrication, extraordinary removal efficacy of anionic dyes and adsorption mechanism.

Eco-friendly and renewable sodium alginate, as a potential alternative to fossil resources, has attracted considerable attention in wastewater treatment field. Herein, we develop a SA/PEI/PEG (sodium alginate/polyethyleneimine/polyethylene glycol diglycidyl ether) adsorbent in which SA was functionalized by PEI/PEG via a facile but effective strategy of one-pot gelation of aqueous SA/PEI/PEG solution. Systematic investigations were accomplished to explore the effects of adsorbent factors on the adsorption performances of the adsorbent towards the anionic dyes CR (congo red), AB-10B (amido black-10B), and AB-25 (acid blue-25). Strikingly, the SA/PEI/PEG exhibited exceptional adsorption performance to CR (2782 mg g-1, 90.6 %), AB-10B (1369 mg g-1, 90.9 %) and AB-25 (4221 mg g-1, 92.6 %) at 30 °C, pH = 3, 200 r min-1 and oscillated 24 h, and demonstrating exceptional reusability after six cycles of adsorption-desorption cycles. Furthermore, the three kinetic, four isothermic and one thermodynamic models were used to investigate the adsorption behaviors of the adsorbent towards these dyes. The possible adsorption mechanism is suggested: Hydrogen bond interactions and electrostatic attractions between SA/PEI/PEG and the dyes primarily contribute to exceptional adsorption capacity. The SA/PEI/PEG adsorbent endowed with easy fabrication, extraordinary adsorption capacity and excellent reusability promises potential application prospects in wastewater purification industry.