Dynamic regulation and cofactor engineering of escherichia coli to enhance production of glycolate from corn stover hydrolysate.

Glycolic acid is widely employed in chemical cleaning, the production of polyglycolic acid-lactic acid, and polyglycolic acid. Currently, the bottleneck of glycolate biosynthesis lies on the imbalance of metabolic flux and the deficiency of NADPH. In this study, a dynamic regulation system was developed and optimized to enhance the metabolic flux from glucose to glycolate. Additionally, the knockout of transhydrogenase (sthA), along with the overexpression of pyridine nucleotide transhydrogenase (pntAB) and the implementation of the Entner-Doudoroff pathway, were performed to further increase the production of the NADPH, thereby increasing the titer of glycolate to 5.6 g/L. To produce glycolate from corn stover hydrolysate, carbon catabolite repression was alleviated and glucose utilization was accelerated. The final strain, E. coli Mgly10-245, is inducer-free, achieving a glycolate titer of 46.1 g/L using corn stover hydrolysate (77.1 % of theoretical yield). These findings will contribute to the advancement of industrial glycolate production.

Optimization of Lurasidone HCl-Loaded PLGA Nanoparticles for Intramuscular Delivery: Enhanced Bioavailability, Reduced Dosing Frequency, Pharmacokinetics, and Therapeutic Outcomes.

This study aimed to develop a nanoparticle drug delivery system using poly (lactic-co-glycolic acid) (PLGA) for enhancing the therapeutic efficacy of lurasidone hydrochloride (LH) in treatment of schizophrenia through intramuscular injection. LH-loaded PLGA nanoparticles (LH-PNPs) were prepared using the nanoprecipitation technique and their physicochemical characteristics were assessed. Particle size (PS), zeta potential, morphology, % encapsulation efficiency, % drug loading, drug content, and solid-state properties were analyzed. Stability, in vitro release, and in vivo pharmacokinetic studies were conducted to evaluate the therapeutic efficacy of the developed LH-PNPs. The optimized batch of LH-PNPs exhibited a narrow and uniform PS distribution before and after lyophilization, with sizes of 112.7 ± 1.8 nm and 115.0 ± 1.3 nm, respectively, and a low polydispersity index. The PNPs showed high drug entrapment efficiency, drug loading, and drug content uniformity. Solid-state characterization indicated good stability and compatibility, with a nonamorphous state. The drug release profile demonstrated sustained release behavior. Intramuscular administration of LH-PNPs in rats resulted in a significantly prolonged mean residence time compared with the drug suspension. These findings highlight that intramuscular delivery of the LH-PNP formulation is a promising approach for enhancing the therapeutic efficacy of LH in treatment of schizophrenia.

Evaluating the Efficacy of Polyglycolic Acid-Loading Tetrandrine Nanoparticles in the Treatment of Dry Eye.

INTRODUCTION: Dry eye disease (DED) is a multifactor-induced disease accompanied by increased osmolarity of the tear film and inflammation of the ocular surface. Traditional anti-inflammation agent corticosteroids applied in DED treatment could result in high intraocular pressure, especially in long-term treatment. Therefore, we explored a nano drug that aimed to block the formation pathway of DED which had anti-inflammatory, sustained release, and good biocompatibility characteristics in this study. METHODS: We prepared a novel nanomedicine (Tet-ATS@PLGA) by the thin film dispersion-hydration ultrasonic method and detected its nanostructure, particle size, and zeta potential. Flow cytometry was used to detect the cell survival rate of each group after 24 h of drug treatment on inflammed Statens Seruminstitut Rabbit Corneal (SIRC) cells. Observed and recorded corneal epithelial staining, tear film rupture time, and Schirmer test to detect tear secretion on the ocular surface of rabbits. The corneal epithelial thickness, morphology, and number of bulbar conjunctival goblet cells were recorded by H&E staining. Finally, we detected the expression of VEGF, IL-1ß, PGE2, and TNF-α by cellular immunofluorescence staining and enzyme-linked immunosorbent assay (ELISA). RESULTS: The encapsulation efficiency and drug loading of Tet-ATS@PLGA were 79.85% and 32.47%, respectively. At eye surface temperature, Tet can easily release from Tet-ATS@PLGA while that it was difficult to release at storage temperature and room temperature. After 2 weeks medication, Tet-ATS@PLGA can effectively improve the tear film rupture time and tear secretion time in a DED model (p <0.05). Compared with the normal group (62.34 ± 4.86 mm), the thickness of corneal epithelium in ATS (29.47 ± 3.21 mm), Tet-ATS (46.23 ± 2.87 mm), and Tet-ATS@PLGA (55.76 ± 3.95 mm) gradually increased. Furthermore, the flow cytometry indicated that Tet-ATS@PLGA can effectively promote the apoptosis of inflammatory SIRC cells, and the cellular immunofluorescence and ELISA experiments showed that the expression intensity of inflammatory factors such as VEGF, IL-1ß, PGE2, and TNF-α decreased in this process. Interestingly, Tet also had the effect of reducing intraocular pressure. CONCLUSION: Tet-ATS@PLGA can effectively promote the apoptosis of inflammatory corneal epithelial cells, thus inhibiting the expression of inflammatory factors to block the formation of DED and improve the secretion of tear on the ocular surface.

In vitro and in vivo evaluation of DC-targeting PLGA nanoparticles encapsulating heparanase CD4+ and CD8+ T-cell epitopes for cancer immunotherapy.

Heparanase has been identified as a universal tumor-associated antigen, but heparanase epitope peptides are difficult to recognize. Therefore, it is necessary to explore novel strategies to ensure efficient delivery to antigen-presenting cells. Here, we established a novel immunotherapy model targeting antigens to dendritic cell (DC) receptors using a combination of heparanase CD4+ and CD8+ T-cell epitope peptides to achieve an efficient cytotoxic T-cell response, which was associated with strong activation of DCs. First, pegylated poly(lactic-coglycolic acid) (PLGA) nanoparticles (NPs) were used to encapsulate a combined heparanase CD4+ and CD8+ T-cell epitope alone or in combination with Toll-like receptor 3 and 7 ligands as a model antigen to enhance immunogenicity. The ligands were then targeted to DC cell-surface molecules using a DEC-205 antibody. The binding and internalization of these PLGA NPs and the activation of DCs, the T-cell response and the tumor-killing effect were assessed. The results showed that PLGA NPs encapsulating epitope peptides (mHpa399 + mHpa519) could be targeted to and internalized by DCs more efficiently, stimulating higher levels of IL-12 production, T-cell proliferation and IFN-γ production by T cells in vitro. Moreover, vaccination with DEC-205-targeted PLGA NPs encapsulating combined epitope peptides exhibited higher tumor-killing efficacy both in vitro and in vivo. In conclusion, delivery of PLGA NP vaccines targeting DEC-205 based on heparanase CD4+ and CD8+ T-cell epitopes are suitable immunogens for antitumor immunotherapy and have promising potential for clinical applications.

Effects of Fiber Diameter and Spacing Size of an Artificial Scaffold on the In Vivo Cellular Response and Tissue Remodeling.

By mimicking the extracellular matrix, nonwoven fabrics can function as scaffolds for tissue engineering application ideally, and they have been characterized regarding their fiber diameter and fiber spacing (spacing size) in vitro. We chronologically examined the in vivo effects of these fabrics on the cellular response and tissue remodeling. Four types of nonwoven polyglycolic acid fabrics (Fabric-0.7, Fabric-0.9, Fabric-3, and Fabric-16 with fiber diameters of 0.7, 0.9, 3.0, and 16.2 µm and spacing sizes of 2.0, 19.3, 19.0, and 825.4 µm, respectively) were implanted into the rat dorsum and subjected to histologic and immunohistochemical analyses from day 3 to 70. With Fabric-0.7, inflammatory cells (mainly M1 macrophages) and myofibroblasts with collagen type III accumulated mainly on the surface of the fabric and did not infiltrate inside the fabric initially, likely due to the narrow fiber space. Massive formation of collagen type I then appeared with the degradation of the fabrics, and finally, the remodeled tissue turned into a dense scar. With Fabric-0.9 and Fabric-3, inflammatory cells (predominantly M2 macrophages) were seen in all layers of the fabric initially. A mild increase in collagen type I was then seen, with few myofibroblasts, and the remodeled tissue ultimately showed a relatively little scar with an adequate thickness of the tissue induced by the fabrics. With Fabric-16, inflammatory cells (predominantly M1 macrophages) infiltrated into all layers of the fabric initially along with many myofibroblasts, especially in the hole. Lately, massive formation of collagen type I was noted due to the slow degradation of the fabric, with the shrinking of the fabric substantially, and the remodeled tissue finally turned to a dense scar. These findings suggest that optimizing the spacing size as well as the fiber diameter of artificial scaffolds may control the cellular response and tissue remodeling and facilitate favorable tissue regeneration without scar formation.

TrkA inhibitor promotes motor functional regeneration of recurrent laryngeal nerve by suppression of sensory nerve regeneration.

Recurrent laryngeal nerve (RLN) injury, in which hoarseness and dysphagia arise as a result of impaired vocal fold movement, is a serious complication. Misdirected regeneration is an issue for functional regeneration. In this study, we demonstrated the effect of TrkA inhibitors, which blocks the NGF-TrkA pathway that acts on the sensory/automatic nerves thus preventing misdirected regeneration among motor and sensory nerves, and thereby promoting the regeneration of motor neurons to achieve functional recovery. RLN axotomy rat models were used in this study, in which cut ends of the nerve were bridged with polyglycolic acid-collagen tube with and without TrkA inhibitor (TrkAi) infiltration. Our study revealed significant improvement in motor nerve fiber regeneration and function, in assessment of vocal fold movement, myelinated nerve regeneration, compound muscle action potential, and prevention of laryngeal muscle atrophy. Retrograde labeling demonstrated fewer labeled neurons in the vagus ganglion, which confirmed reduced misdirected regeneration among motor and sensory fibers, and a change in distribution of the labeled neurons in the nucleus ambiguus. Our study demonstrated that TrkAi have a strong potential for clinical application in the treatment of RLN injury.

Biosynthesis and characterization of poly(d-lactate-co-glycolate-co-4-hydroxybutyrate).

Poly(d-lactate-co-glycolate-co-4-hydroxybutyrate) [poly(d-LA-co-GA-co-4HB)] and poly(d-lactate-co-glycolate-co-4-hydroxybutyrate-co-d-2-hydroxybutyrate) [poly(d-LA-co-GA-co-4HB-co-d-2HB)] are of interest for their potential applications as new biomedical polymers. Here we report their enhanced production by metabolically engineered Escherichia coli. To examine the polymer properties, poly(d-LA-co-GA-co-4HB) polymers having various monomer compositions (3.4-41.0mol% of 4HB) were produced by culturing the engineered E. coli strain expressing xylBC from Caulobacter crescentus, evolved phaC1 from Pseudomonas sp. MBEL 6-19 (phaC1437), and evolved pct from Clostridium propionicum (pct540) in a medium supplemented with sodium 4HB at various concentrations. To produce these polymers without 4HB feeding, the 4HB biosynthetic pathway was additionally constructed by expressing Clostridium kluyveri sucD and 4hbD. The engineered E. coli expressing xylBC, phaC1437, pct540, sucD, and 4hbD successfully produced poly(d-LA-co-GA-co-4HB-co-d-2HB) and poly(d-LA-co-GA-co-4HB) from glucose and xylose. Through modulating the expression levels of the heterologous genes and performing fed-batch cultures, the polymer content and titer could be increased to 65.76wt% and 6.19g/L, respectively, while the monomer fractions in the polymers could be altered as desired. The polymers produced, in particular, the 4HB-rich polymers showed viscous and sticky properties suggesting that they might be used as medical adhesives.

Polyglycolic acid-collagen tube combined with collagen-binding basic fibroblast growth factor accelerates gait recovery in a rat sciatic nerve critical-size defect model.

Several nerve conduits have been investigated for their potential as alternative sources of autografts for bridging neural gaps. However, autologous nerve transplants remain the most effective for nerve repair. We examined clinically approved nerve conduits containing collagen and polyglycolic acid (PGA-c) combined with collagen-binding basic fibroblast growth factor (bFGF) containing a polycystic kidney disease (PKD) domain and collagen binding domain (CBD) (bFGF-PKD-CBD) in a rat 15-mm sciatic nerve critical-size defect model. The treatment groups were: PGA-c immersed in phosphate-buffered saline (PBS) (PGA-c/PBS group), bFGF (PGA-c/bFGF group), or bFGF-PKD-CBD (PGA-c/bFGF-PKD-CBD group), and no treatment (Defect group). Gait and histological analyses were performed. Four weeks after treatment, the recovery rate of the paw print area was significantly greater in the PGA-c/bFGFPKD-CBD group than the PGA-c/PBS and PGA-c/bFGF groups. Mean intensity of paw prints was significantly greater in the PGA-c/bFGF-PKD-CBD group than the PGA-c/PBS and Defect groups. Swing time was significantly greater in the PGA-c/PBS, PGA-c/bFGF, and PGA-c/bFGF-PKD-CBD groups than the Defect group. At 8 weeks, all three parameters were significantly greater in the PGA-c/PBS, PGA-c/bFGF, and PGA-c/bFGF-PKD-CBD groups than the Defect group. Regenerated myelinated fibers were observed in 7/8 (87.5%) rats in the PGA-c/bFGF-PKD-CBD group after 8 weeks, and in 1/8 (12.5%) and 3/8 (37.5%) rats in the PGA-c/PBS and PGA-c/bFGF groups, respectively. PGA-c/bFGF-PKD-CBD composites may be promising biomaterials for promoting functional recovery of long-distance peripheral nerve defects in clinical practice.

Tenogenesis of Decellularized Porcine Achilles Tendon Matrix Reseeded with Human Tenocytes in the Nude Mice Xenograft Model.

Cultivation of autologous human tenocytes in a cell-free xenogenic extracellular tendon matrix (xECM) could present an approach for tendon reconstruction. The aim of this study was to achieve tendon-like tissue formation by implanting decellularized porcine Achilles tendons recellularized with human hamstring tendon-derived tenocytes into nude mice. The structure of decellularized xECM was histologically monitored before being dynamically reseeded with human tenocytes. After 6⁻12 weeks in vivo, construct quality was monitored using macroscopical and histological scoring systems, vitality assay and quantitative DNA and glycosaminoglycan (GAG) assays. For comparison to tendon xECM, a synthetic polyglycolic acid (PGA) polymer was implanted in a similar manner. Despite decellularized xECM lost some GAGs and structure, it could be recellularized in vitro with human tenocytes, but the cell distribution remained inhomogeneous, with accumulations at the margins of the constructs. In vivo, the xECM constructs revealed in contrast to the PGA no altered size, no inflammation and encapsulation and a more homogeneous cell distribution. xECM reseeded with tenocytes showed superior histological quality than cell-free implanted constructs and contained surviving human cells. Their DNA content after six and 12 weeks in vivo resembled that of native tendon and xECM recellularized in vitro. Results suggest that reseeded decellularized xECM formed a tendon-like tissue in vivo.

Low power laser irradiation and human adipose-derived stem cell treatments promote bone regeneration in critical-sized calvarial defects in rats.

Both stem cell therapy and physical treatments have been shown to be beneficial in accelerating bone healing. However, the efficacy of combined treatment with stem cells and physical stimuli for large bone defects remains uncertain. The aim of this study was to evaluate the bone regeneration effects of low-power laser irradiation (LPLI) and human adipose-derived stem cell (ADSC) treatments during fracture repair using a comparative rat calvarial defect model. We evaluated the viability of human ADSCs, which were cultured on a porous PLGA scaffold using an MTS assay. The critical-sized calvarial bone defect rats were divided into 4 groups: control group, LPLI group, ADSC group, and ADSC+LPLI group. Bone formation was evaluated using micro-CT. New bone formation areas and osteogenic factor expression levels were then examined by histomorphological analysis and immunohistochemical staining. Our data showed that PLGA had no cytotoxic effect on human ADSCs. Micro-CT analyses revealed that both the LPLI and ADSC groups showed improved calvarial bone defect healing compared to the control group. In addition, the ADSC+LPLI group showed significantly increased bone volume at 16 weeks after surgery. The area of new bone formation ranked as follows: control group < LPLI group < ADSC group < ADSC+LPLI group. There were significant differences between the groups. In addition, both ADSC and ADSC+LPLI groups showed strong signals of vWF expression. ADSC and LPLI treatments improved fracture repair in critical-sized calvarial defects in rats. Importantly, the combined treatment of ADSCs and LPLI further enhances the bone healing process.

Etoposide-Loaded Poly(Lactic-co-Glycolic Acid) Intravitreal Implants: In Vitro and In Vivo Evaluation.

Etoposide-loaded poly(lactic-co-glycolic acid) implants were developed for intravitreal application. Implants were prepared by a solvent-casting method and characterized in terms of content uniformity, morphology, drug-polymer interaction, stability, and sterility. In vitro drug release was investigated and the implant degradation was monitored by the percent of mass loss. Implants were inserted into the vitreous cavity of rabbits' eye and the in vivo etoposide release profile was determined. Clinical examination and the Hen Egg Test-Chorioallantoic Membrane (HET-CAM) method were performed to evaluate the implant tolerance. The original chemical structure of the etoposide was preserved after incorporation in the polymeric matrix, which the drug was dispersed uniformly. In vitro, implants promoted sustained release of the drug and approximately 57% of the etoposide was released in 50 days. In vivo, devices released approximately 63% of the loaded drug in 42 days. Ophthalmic examination and HET-CAM assay revealed no evidence of toxic effects of implants. These results tend to show that etoposide-loaded implants could be potentially useful as an intraocular etoposide delivery system in the future.

Antifungal Activity of Chitosan-Coated Poly(lactic-co-glycolic) Acid Nanoparticles Containing Amphotericin B.

Amphotericin B (AmB) is one of the most used drugs for the treatment of systemic fungal infections; however, the treatment causes several toxic manifestations, including nephrotoxicity and hemolytic anemia. Chitosan-coated poly(lactide-co-glycolide) (PLGA) nanoparticles containing AmB were developed with the aim to decrease AmB toxicity and propose the oral route for AmB delivery. In this work, the antifungal efficacy of chitosan-coated PLGA nanoparticles containing AmB was evaluated in 20 strains of fungus isolates from patients with vulvovaginal candidiasis (01 Candida glabrata and 03 Candida albicans), bloodstream infections (04 C. albicans and 01 C. tropicalis) and patients with urinary tract infection (04 Candida albicans, 02 Trichosporon asahii, 01 C. guilhermondii, 03 C. glabrata) and 01 Candida albicans ATCC 90028. Moreover, the cytotoxicity over erythrocytes was evaluated. The single-emulsion solvent evaporation method was suitable for obtaining chitosan-coated PGLA nanoparticles containing AmB. Nanoparticles were spherical in shape, presented mean particle size about 460 nm, positive zeta potential and encapsulation efficiency of 42%. Moreover, nanoparticles prolonged the AmB release. All the strains were susceptible to plain AmB and nanostructured AmB, according to EUCAST breakpoint version 8.1 (resistant > 1 µg/mL), using broth microdilution method. In C. albicans (urine, blood, and vulvovaginal secretion isolates, and 1 ATCC), the MIC value of AmB-loaded nanoparticles varied from 0.25 to 0.5 µg/mL and EUCAST varied from 0.03 to 0.5 µg/mL. In urine and vulvovaginal secretion isolates of C. glabrata, the MIC value of AmB-loaded nanoparticles varied from 0.25 to 0.5 µg/mL and EUCAST varied from 0.03 to 0.015 µg/mL. In urine isolates of C. guilhermondii, the MIC value of AmB-loaded nanoparticles was 0.12 µg/mL and EUCAST was 0.06 µg/mL. In blood isolates of C. tropicalis, the MIC value of AmB-loaded nanoparticles was 0.5 µg/mL and EUCAST was 0.25 µg/mL. Finally, in urine isolates of T asahii, the MIC value of AmB-loaded nanoparticles was 1 µg/mL and EUCAST varied from 0.5 to 1 µg/mL. In the cytotoxicity assay, plain AmB was highly hemolytic (100% in 24 h) while AmB-loaded chitosan/PLGA nanoparticles presented negligible hemolysis.

Molybdenum cluster loaded PLGA nanoparticles: An innovative theranostic approach for the treatment of ovarian cancer.

We evaluate poly (d,l-lactide-co-glycolide) (PLGA) nanoparticles embedding inorganic molybdenum octahedral cluster for photodynamic therapy of cancer (PDT). Tetrabutyl ammonium salt of Mo6Br14 cluster unit, (TBA)2Mo6Br14, presents promising photosensitization activity in the destruction of targeted cancer cells. Stable cluster loaded nanoparticles (CNPs) were prepared by solvent displacement method showing spherical shapes, zeta potential values around -30 mV, polydispersity index lower than 0.2 and sizes around 100 nm. FT-IR and DSC analysis revealed the lack of strong chemical interaction between the cluster and the polymer within the nanoparticles. In vitro release study showed that (TBA)2Mo6Br14 was totally dissolved in 20 min, while CNPs were able to control the release of encapsulated cluster. In vitro cellular viability studies conducted on A2780 ovarian cancer cell line treated up to 72 h with cluster or CNPs did not show any sign of toxicity in concentrations up to 20 µg/ml. This concentration was selected for photo-activation test on A2780 cells and CNPs were able to generate oxygen singlet resulting in a decrease of the cellular viability up to 50%, respectively compared to non-activated conditions. This work presents (TBA)2Mo6Br14 as a novel photosensitizer for PDT and suggests PLGA nanoparticles as an efficient delivery system intended for tumor targeting.

Surface functionalized magnetic nanoparticles shift cell behavior with on/off magnetic fields.

Magnetic nanoparticles (MNPs) are used as contrast agents and targeted drug delivery systems (TDDS) due to their favorable size, surface charge, and magnetic properties. Unfortunately, the toxicity associated with MNPs limits their biological applications. Surface functionalization of MNPs with selective polymers alters the surface chemistry to impart better biocompatibility. We report the preparation of surface functionalized MNPs using iron oxide NPs (MNPs), poly (lactic-co-glycolic acid) (PLGA), and sodium alginate via co-precipitation, emulsification, and electro-spraying, respectively. The NPs are in the nanosize range and negatively charged. Morphological and structural analyses affirm the surface functionalized nanostructure of the NPs. The surface functionalized MNPs are biocompatible, and demonstrate enhanced intracellular delivery under an applied magnetic field (H), which evinces the targeting ability of MNPs. After NP treatment, the physico-mechanical properties of fibroblasts are decided by the selective MNP uptake under "on" or "off" magnetic field conditions. We envision potential use of biocompatible surface functionalized MNP for intracellular-, targeted-DDS, imaging, and for investigating cellular mechanics.

In vivo release of peptide-loaded PLGA microspheres assessed through deconvolution coupled with mechanistic approach.

In this study, a reevaluation of the in vivo release phases from long-release PLGA-based microspheres is presented, leading to a better characterization of the plasma concentrations/time profile. Microspheres were designed for intramuscular injection releasing a cyclic somatostatin analog over 70 days. Clinical study was performed in 64 healthy subjects receiving a subcutaneous dose of an immediate release solution as reference formulation and an intramuscular injection of microspheres as test formulation. The in vivo input curve was obtained by numerical deconvolution. Results showed that double Weibull function could not fit correctly the tri-phasic (burst, lag, and erosion) in vivo input profile typical for PLGA-based formulations, due to a change in the drug release trend in the terminal phase. Triple Weibull showed a significant improvement in the curve fitting, each term being assigned to one of the following phases: initial (burst/lag), erosion, and terminal phase of drug release. The existence of the additional terminal phase was confirmed by a mechanistic approach as well, which denoted that this phase was, most probably, a consequence of the release mechanism change from erosion to diffusion controlled. The same model demonstrated that the burst release was as well influenced by the polymer swelling, while currently existing theories state that the burst phase is mainly determined by the dissolution of immediately available drug substance and diffusion through surface related pores.

Preparation and characterization of surface-modified PLGA-polymeric nanoparticles used to target treatment of intestinal cancer.

Docetaxel (DTX), a cytotoxic taxane, is a poor water-soluble drug and exhibits less oral bioavailability. Current research investigates the effective transport, for DTX-loaded chitosan (CS)-coated-poly-lactide-co-glycolide (PLGA)-nanoparticles (NPs) (DTX-CS-PLGA-NPs) and DTX-PLGA-NPs as well as a novel third-generation P-gp inhibitor i.e. GF120918 (Elacridar), across intestinal epithelium with its successive uptake by the tumour cells in an in vitro model. The prepared NPs showed a spherical shape particle size i.e. <123.96 nm with polydispersity index (PDI) of <0.290 whereas for CS-coated NPs, the zeta potential was converted from negative to positive value along with a small modification in particle size distribution. The entrapment efficiency observed for DTX-CS-PLGA-NPs was 74.77%, whereas the in vitro release profile revealed an initial rapid DTX release followed by a sustained release pattern. For apparent permeability, DTX-CS-PLGA-NPs and DTX-PLGA-NPs along with GF120918 showed a five-fold (p < .01) and 2.2-fold enhancement, respectively, as observed in rat ileum permeation study. Similarly, for pharmacokinetic (PK) studies, higher oral bioavailability was observed from DTX-CS-PLGA-NPs (5.11-folds) and DTX-PLGA-NPs (3.29-folds) as compared with DTX-suspension (DTX-S). Cell uptake studies on A549 cells as performed for DTX-CS-PLGA-NPs and DTX-PLGA-NPs loaded with rhodamine 123 dye, exhibited enhanced uptake as compared with plain dye solution. The enhanced uptake for DTX-CS-PLGA-NPs and DTX-PLGA-NPs formulations in the presence of GF120918 was confirmed further with the help of confocal laser scanning microscopic images (CLSM). The potential of the third-generation novel P-gp inhibitor (GF120918) investigated for the effective delivery of DTX as well as investigation of permeability and uptake studies whereby a strong potential of GF120918 for effective oral delivery was established.

Distribution of PLGA-modified nanoparticles in 3D cell culture models of hypo-vascularized tumor tissue.

BACKGROUND: Advanced stage cancer treatments are often invasive and painful-typically comprised of surgery, chemotherapy, and/or radiation treatment. Low transport efficiency during systemic chemotherapy may require high chemotherapeutic doses to effectively target cancerous tissue, resulting in systemic toxicity. Nanotherapeutic platforms have been proposed as an alternative to more safely and effectively deliver therapeutic agents directly to tumor sites. However, cellular internalization and tumor penetration are often diametrically opposed, with limited access to tumor regions distal from vasculature, due to irregular tissue morphologies. To address these transport challenges, nanoparticles (NPs) are often surface-modified with ligands to enhance transport and longevity after localized or systemic administration. Here, we evaluate stealth polyethylene-glycol (PEG), cell-penetrating (MPG), and CPP-stealth (MPG/PEG) poly(lactic-co-glycolic-acid) (PLGA) NP co-treatment strategies in 3D cell culture representing hypo-vascularized tissue. RESULTS: Smaller, more regularly-shaped avascular tissue was generated using the hanging drop (HD) method, while more irregularly-shaped masses were formed with the liquid overlay (LO) technique. To compare NP distribution differences within the same type of tissue as a function of different cancer types, we selected HeLa, cervical epithelial adenocarcinoma cells; CaSki, cervical epidermoid carcinoma cells; and SiHa, grade II cervical squamous cell carcinoma cells. In HD tumors, enhanced distribution relative to unmodified NPs was measured for MPG and PEG NPs in HeLa, and for all modified NPs in SiHa spheroids. In LO tumors, the greatest distribution was observed for MPG and MPG/PEG NPs in HeLa, and for PEG and MPG/PEG NPs in SiHa spheroids. CONCLUSIONS: Pre-clinical evaluation of PLGA-modified NP distribution into hypo-vascularized tumor tissue may benefit from considering tissue morphology in addition to cancer type.

In vitro remodeling and structural characterization of degradable polymer scaffold-based tissue-engineered vascular grafts using optical coherence tomography.

Non-destructive imaging strategies to monitor long-term cultures is essential for vascular engineering. The goal of this study is to investigate whether optical coherence tomography (OCT) can be a suitable approach to monitor the long-term remodeling process of biodegradable polymeric scaffold-based tissue-engineered vascular grafts (TEVG) after pulsatile stimulation and to observe polymeric scaffold degradation during bioreactor cultivation. In the present study, a perfusion system driven by a ventricular assist device was provided for a three-dimensional culture system as a pulsatile force. We characterized the structural features of wall thickness and polyglycolic acid degradation based on optical signal attenuation using catheter-based OCT. Scanning electron microscopy confirmed morphological changes. Also, polymer degradation and the detection of different types of collagen was visualized after 4 weeks of culture by means of polarized microscopy. Findings on OCT imaging correlated with those on histological examination and revealed the effects of pulsatile stimulation on the development of engineered vessels. This finding demonstrated that real-time imaging with OCT may be a promising tool for monitoring the growth and remodeling characterization of TEVG and provide a basis to promote the ideal and long-term culture of vascular tissue engineering.

Single particle extinction and scattering optical method unveils in real time the influence of the blood components on polymeric nanoparticles.

Here we report the quantitative in situ characterization of size distribution evolution of polymeric nanoparticles incubated in murine serum, filtered and unfiltered murine blood. We used an analytical optical approach, named Single Particle Extinction and Scattering (SPES), which relies on the measurements of two independent parameters of single particles. SPES is based on a robust self-reference interference optical scheme which allows a rejection of the spurious signals coming from the background caused by the medium. We employed polystyrene nanoparticles as reference system and polydisperse poly(lactic-co-glycolic acid) nanoparticles. Our results demonstrate that SPES can be used for carrying out ex vivo analysis of nanoparticles to evaluate the modifications that NPs undergo in vivo following different routes of entry. Conversely, Dynamic Light Scattering is not able to provide reliable results for these systems due to the presence of the biological components in solution.

Enhanced Delivery and Effects of Acid Sphingomyelinase by ICAM-1-Targeted Nanocarriers in Type B Niemann-Pick Disease Mice.

Acid sphingomyelinase deficiency in type B Niemann-Pick disease leads to lysosomal sphingomyelin storage, principally affecting lungs, liver, and spleen. Infused recombinant enzyme is beneficial, yet its delivery to the lungs is limited and requires higher dosing than liver and spleen, leading to potentially adverse reactions. Previous studies showed increased enzyme pulmonary uptake by nanocarriers targeted to ICAM-1, a protein overexpressed during inflammation. Here, using polystyrene and poly(lactic-co-glycolic acid) nanocarriers, we optimized lung delivery by varying enzyme dose and nanocarrier concentration, verified endocytosis and lysosomal trafficking in vivo, and evaluated delivered activity and effects. Raising the enzyme load of nanocarriers progressively increased absolute enzyme delivery to all lung, liver, and spleen, over the naked enzyme. Varying nanocarrier concentration inversely impacted lung versus liver and spleen uptake. Mouse intravital and postmortem examination verified endocytosis, transcytosis, and lysosomal trafficking using nanocarriers. Compared to naked enzyme, nanocarriers increased enzyme activity in organs and reduced lung sphingomyelin storage and macrophage infiltration. Although old mice with advanced disease showed reactivity (pulmonary leukocyte infiltration) to injections, including buffer without carriers, antibody, or enzyme, younger mice with mild disease did not. We conclude that anti-ICAM nanocarriers may result in effective lung enzyme therapy using low enzyme doses.