Effect of chlorination and ultraviolet on the adsorption of pefloxacin on polystyrene and polyvinyl chloride.

During the water treatment process, chlorination and ultraviolet (UV) sterilization can modify microplastics (MPs) and alter their physicochemical properties, causing various changes between MPs and other pollutants. In this study, the impact of chlorination and UV modification on the physicochemical properties of polystyrene (PS) and polyvinyl chloride (PVC) were investigated, and the adsorption behavior of pefloxacin (PEF) before and after modification was examined. The effect of pH, ionic strength, dissolved organic matter, heavy metal ions and other water environmental conditions on adsorption behavior was revealed. The results showed that PS had a higher adsorption capacity of PEF than PVC, and the modification increased the presence of O-containing functional groups in the MPs, thereby enhancing the adsorption capacity of both materials. Chlorination had a more significant impact on the physicochemical properties of MPs compared to UV irradiation within the same time period, leading to better adsorption performance of chlorination. The optimal pH for adsorption was found to be 6, and NaCl, sodium alginate and Cu2+ would inhibit adsorption to varying degrees, among which the inhibition caused by pH was the strongest. Chlorination and UV modification would weaken the inhibitory effect of environmental factors on the adsorption of PEF by MPs. The main mechanisms of adsorption involved electrostatic interaction and hydrogen bonding. The study clarified the effects of modification on the physicochemical properties of MPs, providing reference for subsequent biotoxicity analysis and environmental protection studies.

Polyvinyl chloride microplastics disseminate antibiotic resistance genes in Chinese soil: A metagenomic analysis.

The widespread prevalence of microplastics (MPs) in the environment poses concerns as they are vectors of antibiotic resistance genes (ARGs). The relationships between antibiotic resistomes and MPs remain unexplored in soil which was considered as the reservoirs of MPs and ARGs. This study investigated the effects of polyvinyl chloride (PVC) MPs on soil bacterial communities and ARG abundance which soil samples sourced from 20 provinces across China. We found that PVC significantly influences soil bacterial community structure and ARG abundance. Structural equation modeling revealed that PVC alters soil characteristics, ultimately affecting soil bacterial communities, including ARG-containing bacterial hosts, and the relative abundance of ARGs. This study enhances our understanding of how MPs influence the proliferation and hosts of ARGs within diverse soil environments, offering crucial insights for future strategies in plastic management and disposal.

Life-Cycle Environmental Impacts of Additive-Related Chemicals in Polyvinyl Chloride Plastics and the Mitigation Potential.

Plastic additive-related chemicals, particularly in polyvinyl chloride (PVC) plastics, have become a key issue in plastic pollution. Although addressing plastic pollution through the life-cycle approach is crucial, the environmental impacts of typical plastic additive-related chemicals in PVC plastics during the cradle-to-gate stage remain unexplored. Consequently, managing the life-cycle environmental impacts of these additives remains challenging. Herein, the environmental impacts of 23 typical plastic additive-related chemicals and six PVC plastic products were evaluated throughout the cradle-to-gate life-cycle stage using a life cycle assessment-material flow analysis (LCA-MFA) coupled model. The results indicate that plastic additives significantly contribute to the environmental impacts of PVC plastic products across various end point indicators, ranging from 8.7 to 40.6%. Additionally, scenario analysis (SA) reveals that conventional strategies for addressing plastic pollution may not be highly effective in mitigating the environmental impacts associated with plastic additives. Specifically, compared to primary polymers, these additives exhibit 4 to 13% lower mitigation potential under the same policy scenarios. However, technical adjustment strategies targeting additives show a mitigation potential of 12 to 39%, suggesting that guiding the plastic additive industry toward green transformation is a key strategy for reducing environmental impacts.

The mechanism of UV accelerated aging of polyvinyl chloride in marine environment: The role of free radicals.

This study systematically investigated the photo-aging of polyvinyl chloride (PVC) in deionized water, estuary water, and seawater. As the concentration of Cl- increases, the carbonyl index (CI) of PVC during photo aging also increases, indicating that Cl- plays a dominant role in PVC photoaging in the environment, which enhance carbonyl index and •OH radical accumulation. Unlike previous studies, this study discovered that halogen radicals were also generated during PVC aging. Compared to •OH radicals, halogen radicals exhibit stronger selectivity and are more conducive to the photo aging of PVC. Additionally, it was found that PVC shows specific toxicity to Paramecia caudatum at various concentrations both before and after aging, affecting the reproduction process of Paramecia caudatum. This study elucidates the mechanism by which anions in natural water bodies affect the rate of PVC aging, providing a scientific basis for understanding the photodegradation of MPs in the ocean.

Transcriptomic analysis reveals interactive effects of polyvinyl chloride microplastics and cadmium on Mytilus galloprovincialis: Insights into non-coding RNA responses and environmental implications.

Despite increasing concerns regarding the interactions of microplastic and heavy metal pollution, there is limited knowledge on the molecular responses of marine organisms to these stressors. In this study, we used whole-transcriptome sequencing to investigate the molecular responses of the ecologically and economically important bivalve Mytilus galloprovincialis to individual and combined exposures of environmentally relevant concentrations of PVC microplastics and cadmium (Cd). Our results revealed distinct transcriptional changes in M. galloprovincialis, with significant overlap in the differentially expressed genes between the individual and combined exposure groups. Genes involved in cellular senescence, oxidative stress, and galactose metabolism were differentially expressed. Additionally, key signaling pathways related to apoptosis and drug metabolism were significantly modulated. Notably, the interaction of PVC microplastics and Cd resulted in differential expression of genes involved in drug metabolism and longevity regulating compared to single exposures. This suggests that the interaction between these two stressors may have amplified effects on mussel health. Overall, this comprehensive transcriptomic analysis provides valuable insights into the adaptive and detrimental responses of M. galloprovincialis to PVC microplastics and Cd in the environment.

A low-temperature co-treatment of diethylhexyl phthalate-rich polyvinyl chloride and waste copper catalyst by subcritical water (hydrothermal treatment): Dechlorination, recovery of diethylhexyl phthalate and copper.

As one of the most widespread plastics in the world, the recycling of diethylhexyl phthalate-rich polyvinyl chloride (DEHP-rich PVC) faces great challenges because of the high levels of Cl and plasticizers. On the other hand, waste copper catalyst (WCC) discharged from various industrial processes is not effectively recycled. In this study, a significant synergistic effect between the DEHP-rich PVC and WCC was found in a subcritical water (SubCW) medium, and a co-treatment of the DEHP-rich PVC and WCC was developed by the SubCW process. The introduction of WCC significantly improved the dechlorination efficiency of the DEHP-rich PVC to 96.03 % at a low temperature of 250 °C. Under the optimal conditions, the leaching of copper from WCC reached a maximum of 81.08 %. Oil products included DEHP (55.7 %, GC peak area%), 3-methyl-3-heptene (37.3 %, GC peak area%), and 2-ethyl-1-hexanol (7.0 %, GC peak area%). The dechlorination pathways of the DEHP-rich PVC included hydroxyl substitution and direct dechlorination. HCl released from the DEHP-rich PVC led to a decrease in the pH of the system and significant copper leaching from the WCC. DEHP was decomposed by hydrolysis, dehydration, and rearrangement reaction by the SubCW co-treatment process. The enhancement mechanism of the WCC for the dechlorination of the DEHP-rich PVC was based on that the conversion of copper species in the SubCW promoted the formation of hydroxyl radicals and the hydroxyl substitution for chlorine in PVC molecular chain. The proposed SubCW low-temperature co-treatment could be a prospective strategy for the low-energy and synchronous recovery of the two different wastes of the DEHP-rich PVC and WCC.

New commercial wipes inhibit the dispersion and adhesion of Staphylococcus aureus and Pseudomonas aeruginosa biofilms.

AIM: Bacterial biofilms can form on surfaces in hospitals, clinics, farms, and food processing plants, representing a possible source of infections and cross-contamination. This study investigates the effectiveness of new commercial wipes against Staphylococcus aureus and Pseudomonas aeruginosa biofilms (early attachment and formed biofilms), assessing LH SALVIETTE wipes (Lombarda H S.r.l.) potential for controlling biofilm formation. METHODS AND RESULTS: The wipes efficacy was studied against the early attachment phase and formed biofilm of S. aureus ATCC 6538 and P. aeruginosa ATCC 15442 on a polyvinyl chloride (PVC) surface, following a modified standard test EN 16615:2015, measuring Log10 reduction and cell viability using live/dead staining. It was also evaluated the wipes anti-adhesive activity over time (3 h, 2 4h), calculating CFU.mL-1 reduction. Data were analyzed using t-student test. The wipes significantly reduced both early phase and formed S. aureus biofilm, preventing dispersion on PVC surfaces. Live/dead imaging showed bacterial cluster disaggregation and killing action. The bacterial adhesive capability decreased after short-time treatment (3 h) with the wipes compared to 24 h. CONCLUSIONS: Results demonstrated decreased bacterial count on PVC surface both for early attachment phase and formed biofilms, also preventing the bacterial biofilm dispersion.

Pyrolysis-induced migration and transformation of heavy metals in sewage sludge containing microplastics.

Stabilizing heavy metals (HMs) in sewage sludge is urgently needed to facilitate its recycling and reuse. Pyrolysis stands out as a promising method for not only stabilizing these metals but also producing biochar. Our research delves into the migration and transformation of specific HMs (Cr, Mn, Ni, Cu, Zn, As, and Pb) during co-pyrolysis under various conditions, including the presence and absence of microplastics (PVC and PET). We examined different concentrations of these plastics (1 %, 5 %, 10 %, and 15 %) and temperatures (300 °C, 500 °C, and 700 °C). Findings reveal that microplastics, particularly PVC, enhance the migration of Zn and Mn, leading to significant volatilization of Zn and Pb at higher temperatures, peaking at 700 °C. The increase in temperature also markedly influences HM migration, with As showcasing notable loss rates that climbed by 18.0 % and 16.3 % in systems with PET and PVC, respectively, as temperatures soared from 300 °C to 700 °C. Moreover, our speciation analysis indicates that microplastics aid in transforming certain HMs from unstable to more stable forms, suggesting their beneficial role in HM stabilization during pyrolysis. This study significantly enriches our understanding of microplastics' impact on HM behavior in sewage sludge pyrolysis, offering new avenues for pollution control and environmental management strategies.

Electron beam synergetic removal of microplastics and hexavalent chromium: Synergetic removal process and mechanism.

Microplastics are ubiquitous in the environment and aged microplastics are highly susceptible to absorbing pollutants from the environment. In this study, electron beam was innovatively used to treat PVC composite Cr(VI) pollutants (Composite contaminant formed by polyvinyl chloride microplastics with the heavy metal hexavalent chromium). Experiments showed that electron beam was able to achieve synergistic removal of PVC composite Cr(VI) pollutants compared to degrading the pollutants alone. During the electron beam removal of PVC composite Cr(VI) pollutants, the reduction efficiency of Cr(VI) increased from 57% to 92%, Cl- concentration increased from 3.52 to 12.41 mg L-1, and TOC concentration increased from 16.72 to 26.60 mg L-1. The research confirmed that electron beam can effectively promote the aging degradation of PVC, alter the physicochemical properties of microplastics, and generate oxygen-containing functional groups on the surface of microplastics. Aged microplastics enhanced the adsorption capacity for Cr(VI) through electrostatic and chelation interactions, and the adsorption process followed second-order kinetics and the Freundlich model. Theoretical calculations and experiments demonstrated that PVC consumed oxidizing free radical through dechlorination and decarboxylation processes, generating inorganic ions and small organic molecules. These inorganic ions and small organic molecules further reacted with oxidizing free radical to produce reducing free radicals, facilitating the reduction of Cr(VI). Cr(VI) continuously consumed the educing free radicals to transform into Cr (Ⅲ), enhancing the system oxidative atmosphere and promoting the oxidation degradation of PVC. This study investigated the formation and synergistic removal processes of PVC composite pollutants, offering new insights for controlling microplastics composite pollution.

Enhancing microplastic removal from natural water using coagulant aids.

Microplastic (MP) pollution poses a significant environmental challenge, underscoring the need for improved water treatment methods. This study investigates the effectiveness of coagulation, flocculation, and sedimentation processes for removing microbeads, focusing on key factors that influence removal efficiency. Among the coagulants tested, polyaluminium chloride (PAC) demonstrated superior performance by enhancing the aggregation of microplastics with flocs. Optimal treatment conditions were determined to be 0.4 mmol/L PAC and 3 mg/L polyacrylamide (PAM) at pH 8 (before adding PAC), with rapid stirring at 240 rpm for 1 min, followed by slow stirring at 35 rpm for 13 min, and a sedimentation period of 25 min. Under these conditions, removal efficiencies exceeded 95 % for a range of microbeads (10-1000 µm: Polystyrene (PS), Polypropylene (PP), Polyvinyl chloride (PVC), Polyamide (PA), Polyethylene (PE), and Polyurethane (PU)) from natural water samples. Without PAM, PAC alone achieved a 97 % removal rate for PS microbeads. The addition of PAM maintained high removal efficiency, while aluminium sulphate and ferric chloride were less effective, with removal rates of 67 % and 48 % for PS microbeads, respectively. PAM enhanced MP removal across various coagulants and microbead types, with maximum efficiency observed at PAM concentrations of ≥3 mg/L. The treatment also demonstrated that organic matter in Regent's Park pond water could further improve MP removal. Size significantly impacts removal efficiency: larger microbeads (1 mm to >250 µm) were removed more effectively (95 %) compared to smaller ones (10 to <250 µm), which had a lower removal rate of 49 %. Denser microbeads like PVC (density 1.38 g/cm³) settled more efficiently than lighter microbeads such as PE (density 0.97 g/cm³). These findings suggest a need for advanced technologies to better remove lighter, smaller MPs from water.

Adsorption and desorption of parachlormetaxylenol by aged microplastics and molecular mechanism.

The addition of active ingredients such as antibacterial agent and non-active ingredients such as plastic microspheres (MPs) in personal care products (PCPs) are the common pollutants in the aquatic environment, and their coexistence poses potential threat to the aquatic ecosystem. As a substitute for the traditional antibacterial ingredients triclosan and triclocarban, the usage of parachlormetaxylenol (PCMX) is on the rise and is widely used in PCPs. In this study, the adsorption and desorption behaviors of PCMX were investigated with two typical MPs, polyvinyl chloride (PVC) and polyethylene (PE), and the effects of different aging modes and molecular mechanisms were explored through batch experiments and density functional theory calculation. Both laboratory aging and field aging resulted in surface wrinkles of MPs, along with an increased proportion of oxygen-containing functional groups (CO, -OH). At the same aging time, the degree of laboratory aging was stronger than that of field aging, and the aging degree of PVC was greater that of PE. The aging process enhanced the adsorption capacity of MPs for PCMX. The equilibrium adsorption capacity of PVC increased from 3.713 mg/g (virgin) to 3.823 mg/g (field aging) and 3.969 mg/g (laboratory aging), while that of PE increased from 3.509 mg/g to 3.879 mg/g and 4.109 mg/g, respectively. Meanwhile, aging also resulted in an increase in the desorption capacity of PCMX from PVC and PE. Oxygen-containing functional groups in aged MPs could serve as adsorption sites for PCMX and improved the electrostatic adsorption capacity. Oxygen-containing groups generated on the surface of aged MPs formed hydrogen bonding with the phenolic hydroxyl groups of PCMX, which became the main driving force for adsorption. Our results reveal the potential impact and mechanism of aging on the adsorption of PCMX by MPs, which provides new insights for the interaction mechanism between environmental MPs and associated contaminants.

The impact of the environment of use on the behavior of polychlorinated (vinyl chloride).

Polymers are omnipresent in our daily life thanks to their low production cost and their ease of implementation, which makes thermoplastics more usable in supplying drinking water, distributing cold and hot water, and transporting hot corrosive fluids and industrial chemicals, including inorganic acids. The material of our study is chlorinated polyvinyl chloride (CPVC); it has better thermal insulation and a wide operating temperature range. This paper deals with the impact of thermal aging over time on the behavior of CPVC by performing two types of tests according to ISO 15877 (EN ISO 15877) two types of tests; the first is thermal aging (Fig. 1) at a temperature of 95 °C and a pressure of 10 bars for periods of up to 2000 h and the second test exposure of the pipeline to pressure until bursting. On the basis of the test results, we can predict the rupture of the pipeline and thus avoid the dangerous accidents due to the bursting under the effect of the pressure and the high temperature; by using the results of this study, the inspectors change CPVC structures at the right time, neither too early when the part is still in good condition nor too late after failure; this will be very useful to save water and money and of course save the environment.

Potentiometric determination of the local anesthetic procaine in pharmaceutical samples.

In this study, a new potentiometric sensor was developed for the determination of the local anesthetic drug procaine in pharmaceutical samples. Procaine (Pr)-Tetraphenlyborate (TPB) ion-pair was synthesized and used as a sensor material. Potentiometric sensors using the synthesized ion pair (Pr-TPB), poly(vinyl chloride) (PVC) and o-nitrophenyloctyl ether (o-NPOE) in different proportions were prepared and their performance properties were tested. Among the prepared sensors, the best potentiometric response characteristics were obtained with the sensor composition Pr-TPB:PVC:o-NPOE in the ratio of 6.0:32.0:62.0 (w/w %). The new procaine sensor developed in the present study had a near-Nernstian behavior of 54.1 ± 3.3 mV/per decade and a low detection limit of 3.18 × 10-5 mol L-1 in the concentration range of 1.0 × 10-1-1.0 × 10-4 mol L-1. Additionally, the sensor had a response time of less than 10 s and could work in a wide pH range for two different concentration values without being affected by pH changes. Finally, the new procaine potentiometric sensor was used to detect procaine in injection samples and successfully determined procaine concentrations with high recoveries.

Effects of polyvinyl chloride and low-density polyethylene microplastics on oxidative stress and mitochondria function of earthworm (Eisenia fetida).

Plastics are widely used worldwide due to their convenience. However, microplastics (MPs) accumulation poses a serious threat to ecosystem health. Therefore, understanding the effects of MPs on living organisms within their native ecosystem is crucial. Previous studies have primarily focused on the impacts of MPs in aquatic environments, whereas the effects of MPs on terrestrial ecosystems have remained largely understudied. Therefore, our study assessed the impacts of MPs on soil ecosystems by characterizing their toxic effects on earthworms (Eisenia fetida). Here, we exposed earthworms to two representative plastics within soil environments: polyvinyl chloride (PVC) and low-density polyethylene (LDPE). Given the known link between MPs and oxidative stress, we next quantified oxidative stress markers and mitochondrial function to assess the effects of MPs on the redox metabolism of earthworms. Mitochondria are crucial metabolic organelles that generate reactive oxygen species via uncontrolled ATP production. Our findings demonstrated that MPs exert different effects depending on their type. Neither the PVC-exposed groups nor the LDPE-exposed groups exhibited changes in oxidative stress, as worked by the action of superoxide dismutase (SOD) and glutathione (GSH). While treatment of the two types of MP did not significantly affect the amount of reactive oxygen species/reactive nitrogen species (ROS/RNS) generated, PVC exhibited a more pronounced effect on antioxidant system compared to LDPE. However, mitochondrial function was markedly decreased in the group exposed to high LDPE concentrations, suggesting that the examined LDPE concentrations were too low to activate compensatory mechanisms. Collectively, our findings demonstrated that exposure of MPs not only influences the antioxidant defense mechanisms of earthworms but also alters their mitochondrial function depending on their types.

Polyvinyl chloride nanoplastics transport inhibited in natural sandy soil by iron-modified biochar.

The small particle size of nanoplastics allows them to migrate through soil and make them highly bioavailable, posing a potential threat to groundwater. Measures are urgently needed to reduce the migration of nanoplastics in soil. However, there is limited research available on this topic. In this study, two types of iron-modified biochar (magnetic corncob biochar (MCCBC) and magnetic walnut shell biochar (MWSBC)) were selected and their effects on the transport of polyvinyl chloride nanoplastics (PVC-NPs) in natural sandy soil columns under different ionic types and strengths were investigated. The results show that the transport of PVC-NPs in single sandy soil columns was rapid and efficient, with the estimated breakthrough rate of 85.10%. However, the presence of MCCBC and MWSBC (0.5%, w/w) significantly inhibited the transport of PVC-NPs in sandy soil columns (p < 0.05), and MCCBC had a stronger inhibitory effect on the transport of PVC-NPs than MWSBC. This can be attributed to the fact that the adsorption of PVC-NPs on adsorbents followed the order as: MCCBC > MWSBC > sandy soil. The retention of PVC-NPs by MCCBC and MWSBC is determined by ionic type and ionic strength. The presence of coexisting ions enhanced the inhibitory effect of iron-modified biochar on the transport of PVC-NPs, with the following order: Ca2+ > SO2- 4 > Cl- > NO- 3. The inhibitory effect of MCCBC and MWSBC on the transport of PVC-NPs in soil columns increased with increasing ionic strengths. Furthermore, MCCBC and MWSBC inhibited the migration of PVC-NPs in a rainwater-soil system. The mechanisms by which MCCBC and MWSBC affect the transport of PVC-NPs in soil columns were considered to enhancing adsorption and decreasing soil pore volume. The results provide new insights into the management of soil nanoplastic pollution.

Ecotoxicological assessment, in freshwater environment, of wastewater sludge coupled and uncoupled with micro-polyvinyl chloride on algae and water fleas.

In the frame of bioeconomy and circular economy, wastewater sludge (WS) could be a good candidate for its use in agriculture as fertilizer, due to its high content of organic matter, N and P, but on the other hand, it is full of toxicants such as heavy metal, microplastics, detergent, antibiotics, and so on that can reach groundwater and water bodies in leachate form. In this study, we have investigated different sludge concentrations in the eluate form, combined and not with PVC on two different freshwater organisms Selenastrum capricornutum and Daphnia magna, using ecotoxicity tests. At the endpoint, we have evaluated inhibition growth rate, oxidative stress, and pigments production for S. capricornutum, while in case of D. magna, we have assessed organism immobilization and development. From our results, it emerged that at the higher WS concentration, there was not inhibition growth rate, while at oxidative stress, it was higher in algae treated with WS and PVC. Higher Chl-a production was shown for algae treated with 0.3 g/L of sludge coupled with PVC, where higher phaeopigments production were recorded for algae treated with 0.3 g/L of WS. D. magna has shown an opposite trend when compared with algae, where at the highest WS concentrations supplied was corresponding to an increased mortality explaned as the highest immobility percentage. PRACTITIONER POINTS: Wastewater sludge is used in agriculture as fertilizer. PVC microplastic presence and associate ecotoxicity was tested. PVC presence increased oxidative stress in S. capricornutum. D. magna was significantly affected by sludge concentrations supplied.

Acidic process fluid from hydrothermal carbonization improves dechlorination of waste PVC and produces clean solid and liquid fuels.

Dechlorination of waste PVC (WPVC) by hydrothermal treatment (HTT) is a potential technology for upcycling WPVC in order to create non-toxic products. Literature suggests that acids can improve the HTT process, however, acid is expensive and also results in wastewater. Instead, the acidic process fluid (PF) of hydrothermal carbonization (HTC) of orange peel was utilized in this study to enhance the dechlorination of WPVC during HTT. Acidic HTT (AHTT) experiments were carried out utilizing a batch reactor at 300-350 °C, and 0.25-4 h. The finding demonstrated that the dechlorination efficiency (DE) is high, which indicates AHTT can considerably eliminate chlorine from WPVC and relocate to the aqueous phase. The maximum DE of 97.57 wt% was obtained at 350 °C and 1 h. The AHTT temperature had a considerable impact on the WPVC conversion since the solid yield decreases from 56.88 % at 300 °C to 49.85 % at 350 °C. Moreover, AHTT char and crude oil contain low chloride and considerably more C and H, leading to a considerably higher heating value (HHV). The HHV increased from 23.48 to 33.07 MJ/kg when the AHTT time was raised from 0.25 to 4 h at 350 °C, indicating that the AHTT time has a beneficial effect on the HHV. The majority fraction of crude oil evaporated in the boiling range of lighter fuels include gasoline, kerosene, and diesel (57.58-83.09 wt%). Furthermore, when the AHTT temperature was raised from 300 to 350 °C at 1 h, the HHV of crude oils increased from 26.11 to 33.84 MJ/kg. Crude oils derived from AHTT primarily consisted of phenolic (50.47-75.39 wt%), ketone (20.1-36.34 wt%), and hydrocarbon (1.08-7.93 wt%) constituents. In summary, the results indicated that AHTT is a method for upcycling WPVC to clean fuel.

A novel XYZ electrospinning that orients the trajectory and collimates the electrified fluid jet of polymer nanofibers by induced electric fields.

Electrospinning is a process in which high voltage creates nanostructured fibers with random orientation from a polymer solution. A novel electrospinning instrument was designed and constructed, capable of orienting and collimating the trajectory of the electrified fluid jet. The equipment collimates and adjusts the electrified fluid jet in the X-Y directions using deflector plates connected to a variable electric field. Simultaneously, different membrane thicknesses can be selected, i.e., in the Z direction. Additionally, by programming the sinusoidal function generator to perform an X-Y sweep, Lissajous figures (LF) were obtained. SEM images obtained through XYZ electrospinning of PVC and PVDF membranes were used to determine the control achieved over the orientation distribution of the processed nanofibers and the modification of their diameter, with and without applying the electric field to the deflector plates. The nanofibers obtained from the polymeric membranes, which originated after the straight segment of the Taylor cone, did not exhibit a random trajectory and position. Instead, the collimated electrified fluid jet deposited them in a cross pattern (X-Y) on the collector-cathode plate.

PVC membrane bulk optode incorporating 4-nitrobenzo-15-crown-5 and sodium tetrakis(1-imidazolyl) borate for the pico-molar determination of silver ion in pharmaceutical formulation.

Silver ion (Ag+) is of harmful effects to both environment and human health. Ag+ soluble compounds and salts is used in treating mental illness, epilepsy, nicotine addiction, gastroenteritis, and infectious diseases, including syphilis and gonorrhea, and as anti-infective dermatological agent for controlling nose bleeding. However, high Ag+ doses cause several harmful effects to human health such as irreversible pigmentation of skin and eye, and problems to liver and kidney. A bulk membrane Optode is proposed in this work to measure the Ag+ concentration in the pharmaceutical formulations. The membrane optode is prepared from the ionophore 4-nitobenzo-15-crown-5, the ion-exchanger sodium tetrakis (imidazolyl) borate, the plasticizer o-nitrophenyl octyl ether, and the chromoionophore ETH 5294; these components are dissolved in the PVC/THF slurry to form the membrane. The optode is studied by atomic force microscope and UV-visible spectrophotometer, and its spectrum exhibits two maximum wavelengths of 550 and 665 nm, and response for Ag+ at these maximum wavelengths is reproducible in the concentration range of 10-11 to 10-8 M using acetate buffer of pH 5.0, with very low detection limit of 8.8 × 10-12 M. The most important feature in this work is the selectivity improvement for Ag+ over all interfering ions; the selectivity coefficient logarithm logK A g + , c a t i o n opt is found to be - 4.3 for Cu2+, - 5.6 for Ni2+ and - 5.0 for Cd2+. The response mechanism is studied by FTIR, and it depends on ion-exchange of Ag+ and sodium imidazolyl borate, followed by the host-guest complexation between Ag+ and the crown ionophore, which is accompanied by concomitant deprotonation of the chromoionphore. The optode has a response time of 2-3 min within lifetime of 10 days with the same response. The optode can be applied successfully for Ag+ determination in the pharmaceutical formulation, PinkEye Relief® eye drop, which is used for treating inflammation, redness and water discharge of the eye; the high recovery and low standard deviation of the results using calibration curve method confirm the accuracy and precision of the proposed optode for its application in real samples.

Detection and quantification of microplastics in various types of human tumor tissues.

Microplastics (MPs) have been detected in various human tissues. However, whether MPs can accumulate within tumors and how they affect the tumor immune microenvironment (TIME) and therapeutic responses remains unclear. This study aimed to determine the presence of MPs in tumors and their potential effects on the TIME. Sixty-one tumor samples were collected for analysis. The presence of MPs in tumors was qualitatively and quantitatively assessed using pyrolysis-gas chromatography-mass spectrometry. MPs were detected in 26 of the samples examined. Three types of MPs were identified: polystyrene, polyvinyl chloride, and polyethylene. In lung, gastric, colorectal, and cervical tumors, the MP detection rates were 80 %, 40 %, 50 %, and 17 % (7.1-545.9 ng/g), respectively. MPs were detected in 70 % of pancreatic tumors (18.4-427.1 ng/g) but not detected in esophageal tumors. In pancreatic cancer, the MP-infiltrated TIME exhibited a reduction in CD8+ T, natural killer, and dendritic cell counts, accompanied by substantial neutrophil infiltration. This study illustrates the potential presence of MPs in diverse tumors; varying adhesive affinities were observed among different tumor types. MPs may lead to a more adverse TIME in pancreatic tumors. Further investigations are warranted to assess whether MPs promote tumor progression and affect the efficacy of immunotherapy.