Antifungal activity of Myrrh gum resin against pathogenic Candida spp.

INTRODUCTION AND OBJECTIVE: Medicinal plants have a long and significant history of being used for their healing properties. One famous example is Commiphora, which is mostly found in the southern part of Arabia. The objective of this study was to evaluate the effectiveness of a water-based extract obtained from two different varieties of myrrh in suppressing the proliferation of Candida spp. at different concentrations. MATERIAL AND METHODS: The inhibitory activity of the aqueous extract of two different varieties of myrrh, commonly used in traditional medicine, was assessed against five pathogenic yeasts using the diffusion technique. Mass spectrum was used to analyze myrrh's chemical composition for antimicrobial effects. RESULTS: The aqueous extract of both tested species of myrrh (Commiphora myrrha and Commiphora molmol) showed inhibitory effects on all tested isolates. During the chemical examination of myrrh, it was noted that the material included 12 components known for their antimicrobial properties. The essential oil derived from two varieties of myrrh showed the most significant effects on Candida tropicalis (ATCC 66029), Candida guilliermondii (ATCC 6260), Candida laurentii (ATCC 18803), Candida neoformans (ATCC 66031), and Candida albicans (ATCC 14053). Analysis of chemical composition of the myrrh revealed 19 known components, of which 12 compounds have been proven by research to suppress the growth of microorganisms. CONCLUSIONS: C. myrrha and C. molmol aqueous extracts exhibit a promising antifungal effect against common Candida infections. The aqueous extracts present a variety of antimicrobial compounds; however, further research is necessary to elucidate the specific mechanisms of action of these compounds, and to evaluate their efficacy, toxicity and safety before considering their clinical application.

Resin Acid Copper Salt, an Interesting Chemical Pesticide, Controls Rice Bacterial Leaf Blight by Regulating Bacterial Biofilm, Motility, and Extracellular Enzymes.

Bacterial virulence plays an important role in infection. Antibacterial virulence factors are effective for preventing crop bacterial diseases. Resin acid copper salt as an effective inhibitor exhibited excellent anti-Xanthomonas oryzae pv. oryzae (Xoo) activity with an EC50 of 50.0 µg mL-1. Resin acid copper salt (RACS) can reduce extracellular polysaccharides' (EPS's) biosynthesis by down-regulating gumB relative expression. RACS can also effectively inhibit the bio-mass of Xoo biofilm. It can reduce the activity of Xoo extracellular amylase at a concentration of 100 µg mL-1. Meanwhile, the results of virtual computing suggested that RACS is an enzyme inhibitor. RACS displayed good curative activity with a control effect of 38.5%. Furthermore, the result of the phytotoxicity assessment revealed that RACS exhibited slight toxicity compared with the control at a concentration of 200 µg mL-1. The curative effect was increased to 45.0% using an additional antimicrobial agent like orange peel essential oil. RACS markedly inhibited bacterial pathogenicity at a concentration of 100 µg mL-1 in vivo.

An Unprecedented 4,8-Cycloeudesmane, Further New Sesquiterpenoids, a Triterpene, Steroids, and a Lignan from the Resin of Commiphora myrrha and Their Anti-Inflammatory Activity In Vitro.

Myrrh has a long tradition in the treatment of inflammatory diseases. However, many of its (active) constituents are still unknown. In the present study, secondary metabolites were isolated from an ethanolic extract by various separation methods (liquid-liquid partition, silica and RP18 flash chromatography, CPC, and preparative HPLC), their structures were elucidated with NMR spectroscopy and mass spectrometry, and the selected compounds were tested for their effect on LPS-induced NO production by RAW 264.7 murine macrophages. Among the isolated substances are 17 sesquiterpenes (1-17) including the first 4,8-cycloeudesmane (1), a triterpene (38), two phytosterols (39, 40) and one lignan (43), which were previously unknown as natural products. Numerous compounds are described for the first time for the genus Commiphora. Eight of the eleven compounds tested (1, 29, 31, 32, 34-37) showed a statistically significant, concentration-dependent weak to moderate anti-inflammatory effect on NO production in the LPS-stimulated RAW 264.7 macrophages in vitro. For the reference substance, furanoeudesma-1,3-diene, an IC50 of 46.0 µM was determined. These sesquiterpenes might therefore be part of the multi-target molecular principles behind the efficacy of myrrh in inflammatory diseases.

Pharmacokinetics of a Natural Self-emulsifying Reversible Hybrid-Hydrogel (N'SERH) Formulation of Full-Spectrum Boswellia serrata Oleo-Gum Resin Extract: Randomised Double-Blinded Placebo-Controlled Crossover Study.

The oleo-gum-resin of Boswellia serrata, an Ayurvedic herb for the treatment of chronic inflammatory diseases, contains both volatile (terpenes) and nonvolatile (boswellic acids) molecules as responsible for its bioactivity. The present randomized, double-blinded, placebo-controlled, crossover study evaluated the human pharmacokinetics of a 'natural' hybrid-hydrogel formulation of a unique full-spectrum boswellia extract (BFQ-20) (standardized for both volatile and nonvolatile bioactives) in comparison with unformulated extract (U-BE), for the first time. Mass spectrometry coupled with LC (UPLC-MS/MS) and gas chromatography (GC-MS/MS) measurements of the plasma concentration of boswellic acids and α-thujene at different post-administration time points followed by a single dose (400 mg) of U-BE and BFQ-20, to healthy volunteers (n = 16), offered 4-fold enhancement in the overall bioavailability of boswellic acids from BFQ-20, [area under the curve (AUC) (BFQ-20) = 9484.17 ± 767.82 ng * h/mL vs. AUC (U-BE) = 2365.87 ± 346.89 ng * h/mL], with the absorption maximum (Tmax) at 6.3 h post-administration and elimination half-life (T1/2) of 15.5 h (p < 0.001). While plasma α-thujene was not detectable upon U-BE administration, BFQ-20 provided significant absorption, [AUC (BFQ-20): 298.60 ± 35.48 ng * h/mL; Cmax: 68.80 ± 18.60 ng/mL; Tmax: 4.12 ± 0.38 h; T1/2: 16.24 ± 1.12 h]. Further investigation of the anti-inflammatory effect revealed 70.5% inhibition of paw edema in rats compared to 38.0% for U-BE. In summary, the natural self-emulsifying reversible hybrid-hydrogel (N'SERH) formulation of boswellia extract using fenugreek mucilage (FenuMat®) significantly increased the solubility (58-fold), stability, and bioavailability of both the volatile and non-volatile bioactives which in turn improved the anti-inflammatory efficacy of Boswellia extract.

Identification of 4'-Demethyl-3,9-dihydroeucomin as a Bitter-Masking Compound from the Resin of Daemonorops draco.

Masking the bitter taste of foods is one of the key strategies to improve their taste and palatability, particularly in the context of clean labeling, where natural compounds are preferred. Despite the demand, the availability of natural bitter-masking compounds remains limited. Here, we identified the bitter-masking compound 4'-demethyl-3,9-dihydroeucomin (DMDHE) isolated from the resin of Daemonorops draco by means of an activity-guided in vivo (sensory bitterness rating of quinine) and in vitro (cell-based bitter response assays) approach. First, a mean bitter-masking effect of -29.6 ± 6.30% on the bitterness perceived from quinine [10 ppm] was demonstrated for an organic solvent extract of the resin of D. draco (= DD [500 ppm]) in a sensory trial. The results were verified in a cell-based bitter assay in which the bitter taste receptor (TAS2R)-dependent proton secretion serves as an outcome measure of the cellular bitter response in parietal HGT-1 cells. By means of preparative RP-18 high-performance liquid chromatography (HPLC) analysis combined with activity-guided sensory evaluations, the most potent bitter-masking fractions were identified. Subsequent quantitative liquid chromatography/high-resolution mass spectrometry/charged aerosol detection/ultraviolet (LC-HRMS/CAD/UV), NMR analysis, followed by gram-scale synthesis, led to the characterization of DMDHE as bitter-masking homoisoflavanone. DMDHE decreased the sensory bitterness of quinine by 14.8 ± 5.00%. Functional involvement of TAS2R14 was demonstrated by means of a CRISPR-Cas9 approach, which revealed a reduction of the DMDHE-evoked bitter-masking effect by 40.4 ± 9.32% in HGT-1 TAS2R14ko versus HGT-1 wt cells.

Thermal crosslinking kinetics of shellac and its coating for stiffened and water stable cellulose-based paper straws.

In this work, shellac and its crosslinking were studied to produce paper straws for the application of liquid products. Commercial paper straws are not durable for liquid foods due to their hygroscopic nature, and thus, they find it challenging to replace single-use plastics. Shellac is a naturally occurring resin utilized as an adhesive and water-resistant coating over the paper straw. Shellac was cured at 125 °C, 150 °C, 175 °C, and 200 °C, and it was crosslinked in about 210 min, 150 min, 60 min, and 30 min respectively and studied for kinetics. The crosslinking of shellac produced a thermally stable material. Compared to commercial paper straws, these paper shellac straws exhibited high bending stiffness (1356.11 Nmm), tensile strength (13,74 MPa), flexural strength (21.72 MPa), and compression strength (24.99 MPa). Moreover, the paper shellac straws didn't bend in wet conditions under load for up to one day, while the commercial paper straw bends in 8 min. Therefore, paper straws with shellac can replace plastic-based straws for a sustainable future.

Eleven new glycosidic acid methyl esters from the crude resin glycoside fraction of Ipomoea alba seeds.

Resin glycosides are characteristic of plants of the Convolvulaceae family and are well-known purgative ingredients in crude drugs, such as Rhizoma Jalapae, Orizaba Jalapa Tuber, and Pharbitidis Semen, which are used in traditional medicine and derived from plants belonging to this family. Isolated resin glycosides have demonstrated diverse biological activities, including antibacterial, ionophoric, anti-inflammatory, antiviral, and multidrug-resistance-modulating properties, as well as cytotoxicity against cancer cells. These compounds consist of hydroxyl fatty acid oligoglycosides (glycosidic acids), with portions of the saccharide moieties acylated with some organic acids to form the core structure. This study investigated the glycosidic acid components of a crude resin glycoside fraction obtained from a methanolic extract of Ipomoea alba L. seeds (Convolvulaceae). Eleven new glycosidic acid methyl esters and one known methyl ester were isolated from a glycosidic acid fraction treated with trimethylsilyldiazomethane in hexane. Their structures were determined using acidic hydrolysis and electrospray ionization-time of fight mass spectrometry and NMR spectral analyses. These compounds are penta-, tetra-, or triglycosides, with methyl 11S-hydroxytetradecanoate or methyl 11S-hydroxyhexadecanoate as the aglycone. Although D-quinovose and L-rhamnose are common monosaccharide components, the remaining monosaccharides are D-glucose, D-xylose, or D-fucose. The crude resin glycoside fraction showed non-negligible cytotoxicity against HL-60 human promyelocytic leukemia cells.

Fabrication of liquid-free ionic conductive elastomer (ICE) from cellulose-rosin derived poly(esterimide) towards temperature-tolerant and solvent-resistant UV shadowless adhesive and sensor.

Recently, the utilization of the cellulose to fabricate the multifunctional materials with aim to replace the petroleum-based product, is receiving significant attentions. However, the development of cellulose-based multifunctional materials with high mechanical strength and temperature resistance is still a challenge. Herein, the intrinsic feature and property of cellulose and rosin were creatively employed to fabricate a novel cellulose-rosin based poly(esterimide) (PEI) by esterification reaction and imidization reaction, and the obtained cellulose-rosin derived PEI exhibits superior thermal stability. Then the as-prepared cellulose-rosin derived PEI was dissolved in polymerizable deep eutectic solvents (PDES) and in-situ formed the ionic conductive elastomer (ICE) with via UV-induced polymerization. These cellulose-rosin based ICE exhibited excellent mechanical properties, solvent resistance, and temperature tolerance. By adjusting the mass ratio of cellulose-rosin derived PEI and PDES, the as-prepared liquid-free ICE functions as UV shadowless adhesive and wearable sensors. The bonding strength of UV shadowless adhesive could 1.52 MPa, which could be applied to fix the broken glass toy models. Furthermore, wearable sensors based those ICE could monitor the large and subtle movements even under extreme environmental condition, such as being soaked in organic solvent (such as tetrahydrofuran) or at low/high temperature (-25 °C or 80 °C). This work opens a new avenue for the next-generation of multifunctional ICE.

Modified frankincense resin stabilized gold nanoparticles for enhanced antioxidant and synergetic activity in in-vitro anticancer studies.

For the first time, Frankincense resin (FR) has been carboxymethylated to produce CMFR - AuNPs and the conjugate was utilized for the Doxorubicin drug loading. The carboxymethylation of the carboxylic, phenolic, and hydroxyl functional groups of FR has been developed into carboxymethylated Frankincense resin (CMFR). A novel CMFR-AuNPs was synthesized using the developed CMFR as a stabilizing and reducing agent. The antibacterial, antioxidant, and in-vitro anticancer activities were investigated by using CMFR-AuNPs and CMFR - AuNPs@DOX. CMFR-AuNPs demonstrated antioxidative properties by quenching DPPH radicals effectively. CMFR-AuNPs and DOX@CMFR-AuNPs demonstrated strong antibacterial activity against K. pneumoniae, S. aureus, B. subtilis, and E. coli. The cell viability was tested for CMFR -AuNPs at various concentrations of Dox-loaded CMFR -AuNPs (CMFR-AuNPs + Dox1, CMFR-AuNPs + Dox 2, & CMFR-AuNPs + Dox 3). The highest inhibition was observed on MCF-7 and HeLa cell lines using CMFR-AuNPs + Dox 3, respectively. Various techniques such as UV, FTIR, TGA, XRD, SEM, EDAX and TEM were used to characterize the designed CMFR and CMFR-AuNPs. After carboxy methylation, the amorphous nature of FR changed to crystallinity, as reflected in the XRD spectra. The XRD spectrum of the CMFR- AuNPs showed FCC structure due to the involvement of hydroxyl and carboxylic functional groups of CMFR strongly bound with the AuNPs. TGA results revealed that the CMFR is thermally more stable than FR. TEM revealed that CMFR - AuNPs were well dispersed, spherical, and hexagonal with an average diameter of 7 to 10 nm, while the size of doxorubicin loaded (DOX@CMFR-AuNPs) AuNPs was 11 to 13 nm. Green CMFR-AuNPs have the potential to enhance the drug loading and anticancer efficacy of drugs.

Shellac-based materials: Structures, properties, and applications.

Shellac stands out among natural polymers as the sole animal-derived resin, boasting a complex polyester composition comprising polyhydroxy long-chain fatty acids and sesquiterpene acids. Its unique attributes include biocompatibility, non-toxicity, distinctive amphiphilicity, superb film-forming and adhesive properties, excellent dielectric properties, rapid drying, and solubility in alkaline solutions while resisting acidic ones. These exceptional qualities have propelled shellac beyond its traditional role as a varnish and decorative material, positioning it as a viable option for diverse applications such as food packaging, pharmaceutical formulations, electronic devices, fiber dyeing, and wood restoration. Furthermore, shellac serves as a crucial carbon source for graphene materials. This review comprehensively explores shellac's contributions to prolonging food shelf life, enhancing the carbon sourcing of graphene materials, facilitating the delivery of active substances, boosting the performance of organic field-effect transistors, enabling environmentally friendly textile dyeing, and providing protective coatings for wood. Additionally, it delves into the current limitations and future directions of shellac's applications. By disseminating this knowledge, we aim to deepen researchers' comprehension of shellac and inspire further exploration, thereby fostering sustainable advancements across various industries.

Effect of edaphoclimate on the resin glycoside profile of the ruderal Ipomoea parasitica (Convolvulaceae).

The latex of Ipomoea (Convolvulaceae) is a source of a special kind of acylsugars called resin glycosides, which are highly appreciated because of their biological activities (i.e. laxative, antimicrobial, cytotoxic etc.). Most research has been conducted in perennials with tuberous roots, where resin glycosides are stored. However, their content and variation are unknown in annual vines that lack this type of root, such as in the case of Ipomoea parasitica. This species contains research/biological and human value through its fast growth, survival in harsh environments, and employment in humans for mental/cognitive improvements. These qualities make I. parasitica an ideal system to profile resin glycosides and their variations in response to edaphoclimate. Topsoil samples (0-30 cm depth) and latex from petioles of I. parasitica were collected in two localities of central Mexico. The latex was analyzed through UHPLC-ESI-QTOF, and soil physico-chemical characteristics, the rainfall, minimum, average, and maximum temperatures were recorded. We also measured canopy (%), rockiness (%), and plant cover (%). A Principal Component Analysis was conducted to find associations between edaphoclimate and the resin glycosides. Forty-four resin glycosides were found in the latex of I. parasitica. Ten correlated significantly with three components (47.07%) and contained tetrasaccharide, pentasaccharide, and dimers of tetrasaccharide units. Five resin glycosides were considered constitutive because they were in all the plants. However, exclusive molecules to each locality were also present, which we hypothesize is in response to significant microhabitat conditions found in this study (temperature, clay content, pH, and potassium). Our results showed the presence of resin glycosides in I. parasitica latex and are the basis for experimentally testing the effect of the conditions above on these molecules. However, ecological, molecular, and biochemical factors should be considered in experiments designed to produce these complex molecules.

Four new guaiane sesquiterpenes from Agarwood of Aquilaria sinensis and their biological activity toward renal fibrosis.

Four undescribed guaiane sesquiterpenes, aquisinenoids I-L (2-5) and five known compounds were isolated from the resins of Aquilaria sinensis. Their structures were deduced based on spectroscopic data analysis, X-ray crystallography and ECD calculations. Biologically, compounds 1, 5, 6 and 9 showed anti-renal fibrosis activity, significantly reducing the levels of fibronectin, collagen I, and α-SMA. Compounds 2-4, 7 and 8 could reduce one or two of these proteins at non-toxic concentrations in TGF-ß1 induced NRK-52E cells.

Chemical analysis of different parts from agarwood columns by artificially agarwood-inducing method based on GC-MS and UPLC-TOF-MS.

Agarwood is resin-containing wood produced by plants that have been injured. It is widely used in herbal medicine, incense, decorative items, and so on. In this study, we conducted resin area statistical analysis, determined starch particle and reducing sugar contents, and performed multivariate statistical analysis of chemical composition by GC-MS and UPLC-Q-TOF-MS to explore the different components in sections cut from an agarwood column, designated as A1-A4. The results showed that after stimulation by Agar-Bit inducer, the internal phloem parenchyma cells of the column started to form agarwood, and then starch granules were converted into soluble reducing sugars and agarwood resin. Section A1 showed rapid loss of starch granules, resulting in higher contents of reducing sugars and resin. The resin areas of agarwood in the respective sections were different, gradually decreasing on going from A1 to A4. Total numbers of metabolites of 87 and 63 were identified by GC-MS and UPLC-Q-TOF-MS, respectively. Of these, 10 and 16 metabolites with significant differences (variable importance projection >1) were selected through multivariate statistical analysis. These metabolites included chromones, sesquiterpenes, alkanes, and fatty acids. Among them, 6-methoxy-2-(2-phenylethyl)chromone and 6,7-dimethoxy-2-(2-phenylethyl)chromone were significant markers detected by both GC-MS and UPLC-Q-TOF-MS, which may be essential substances responsible for differences in the agarwood-forming capacities of the cut sections. In conclusion, there has been limited research on the different agarwood-forming capacities of agarwood columns. Here, we explored the differences in various sections of agarwood through chemical analysis to provide a more comprehensive and in-depth understanding of its constitution.

Phytocannabinoid profile and potency of cannabis resin (hashish) of northwest Himalayas of India.

Cannabis is one of the most consumed illicit drugs and the potency of cannabis products is of note due to health-related concerns. Hand-rubbed hashish is the ancient technique of extracting psychoactive resin from cannabis plants and is practiced in the Indian Himalayas. This study establishes the cannabinoid profile and potency of hand-rubbed hashish collected from 20 regions of the northwest Himalayas. Fifty-eight hashish samples were analyzed using a validated high-performance liquid chromatography-diode array detection (HPLC-DAD) method. Ten cannabinoids were quantified including acidic (THCA & CBDA), and neutral compounds (CBDV, THCV, CBD, CBG, CBN, Δ9-THC, Δ8-THC, and CBC). The mean concentration (w/w%) of Δ9-THC is 26%; THCA is 15% and THCTotal is 40% is observed in the studied hashish samples. The majority (70%) of the hashish samples were categorized in chemotype I with the THC:CBD:CBN ratio of 91:3:4, and the remaining 30% were categorized under chemotype II with the ratio of 76:15:8. Diverse qualities of hashish are produced in the studied regions as per the seed, plant selection, and skills of manual rubbing, which results in potency variations. The average difference between the least and highest potent hand-rubbed hashish of a region is 27 w/w% (THCTotal). The other studied non-psychoactive cannabinoids have a mean w/w% of <5%, followed by 6% of CBDA. It is concluded that the cultivated and wild cannabis fields in the northwest Himalayas belong to the drug-type cannabis subspecies. Hand-rubbed hashish holds traditional significance and impacts the current policies of legislation.

Quercetin encapsulation and release using rapid CO2-responsive rosin-based surfactants in Pickering emulsions.

Emulsion-based delivery systems are extensively employed for encapsulating functional active ingredients, protecting them from degradation, and enhancing bioavailability and release efficiency. Here, a CO2-responsive surfactant synthesized from rosin displays rapid responsiveness to CO2 at room temperature, transitioning reversibly switches between active and inactive states multiple times. The dual tertiary amines on the rosin rigid structure contributes to its CO2 sensitivity. When in its active cationic form, in conjunction with silica nanoparticles, it exhibits desired Pickering emulsification performance across various oil phases. In the Pickering emulsion loaded with quercetin, the encapsulation efficiency and loading efficiency reached 80.50% and 0.69%, respectively, with stability lasting at least 30 days. The system provides robust protection for quercetin against external factors, such as UV and heat, revealing sustained release effects. This study investigated the potential of using rosin-based CO2-responsive surfactants alongside nanoparticles to design stable Pickering emulsion systems for active substance encapsulation and sustained release.

Develop a novel and multifunctional soy protein adhesive constructed by rosin acid emulsion and TiO2 organic-inorganic hybrid structure.

Soy protein adhesives (SPI) exhibit broad prospects in substituting aldehyde-based resin due to the economic and environmental-friendly characteristics, but still face a challenge because of the dissatisfied bonding strength and terrible water resistance. Herein, prompted by organic-inorganic hierarchy, a multifunctional and novel soy protein adhesive (SPI-RAE-TiO2) consisting of rosin acid emulsion (RAE) and TiO2 nanoparticles (TiO2) were proposed. In comparison with original SPI, the dry and wet shear strengths of modified adhesive reached 2.01 and 1.21 MPa, respectively, which were increased by 130 % and 200 %. Furthermore, SPI-6RAE-0.5TiO2 was selected as the best proportion via the method of response surface methodology (RSM). What's more, SPI-6RAE-0.5TiO2 adhesive demonstrated prominent coating performance in both dry and wet surface conditions. Meanwhile, SPI-6RAE-0.5TiO2 adhesive possessed excellent mildew resistance and antibacterial ability with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), reflecting the antibacterial rates 97.71 % and 98.16 %, respectively. In addition, SPI-6RAE-0.5TiO2 adhesive also exhibited the outstanding green features such as the reduction of formaldehyde pollution and greenhouse effect through Life Cycle Assessment (LCA). Thus, this work provided a novel and functional approach to design multifunctional, superior-property and low-carbon footprint soy protein adhesive.

Structure-guided isolation of anti-neuroinflammatory sesquiterpene coumarins from Ferula sinkiangensis.

The resin of Ferula sinkiangensis has been traditionally utilized for treating gastrointestinal disorders, inflammation, tumors, various cancers, and alopecia areata. The primary bioactive constituents, sesquiterpene coumarins, have demonstrated notable therapeutic potential against neuroinflammation. In this study, a structure-guided fractionation method was used to isolate nine novel sesquiterpene coumarins from the resin of F. sinkiangensis. These compounds were characterized and structurally elucidated using comprehensive physicochemical and spectroscopic techniques, including calculated electronic circular dichroism (ECD). Anti-neuroinflammatory assays revealed that compounds 2, 3, and 6 significantly inhibited nitric oxide (NO) production in lipopolysaccharide (LPS)-stimulated BV2 microglial cells, with IC50 values ranging from 1.63 to 12.25 µmol·L-1.

Characterisation of New Zealand Propolis from Different Regions Based on Its Volatile Organic Compounds.

Propolis is a bee product mainly consisting of plant resins and is used by bees to maintain the structural integrity of the colony. Propolis is known to contribute to bee health via its antimicrobial activity and is a valued product for human use owing to its nutritional and medicinal properties. Propolis is often characterised into seven categories depending on the resin source. New Zealand propolis is typically assumed as being poplar-type propolis, but few studies have chemically characterised New Zealand propolis to confirm or reject this assumption. Here, for the first time, we characterise propolis originating from different regions in New Zealand based on its volatile organic compounds, using gas chromatography coupled with mass spectrometry (GC-MS). To support this characterisation, we also collected and analysed resin samples from a variety of resin-producing plants (both native to New Zealand and introduced). Our findings suggest that bees mainly use poplar as a resin source, but also utilize native plant species to produce propolis. While regional variation did not allow for clear separation between samples, some patterns emerged, with samples from some regions having more chemical complexity and a higher contribution from native species (as suggested by a higher number of compounds unique to native species resin). Further studies are needed to accurately identify the botanical sources contributing to these samples. It may be also of interest to explore the biological activity of regional propolis samples and their potential nutritional or medicinal benefits.

Rosin: A comprehensive review on traditional uses, phytochemistry, and pharmacology.

Rosin, a natural resin obtained from conifer trees, has a long history of use in traditional folk medicine for treating abscesses, wounds, carbuncles, and burns, etc. It has been employed in ancient Egypt, China, Nordic countries, and Turkey as a therapeutic remedy. This comprehensive review examines the traditional uses, phytochemistry, and pharmacology of rosin, and it provides a critical update on current knowledge of rosin and identifies potential therapeutic opportunities. The chemical composition of rosin is known to vary depending on factors such as botanical sources, geographical locations, and processing methods. Rosin acids, which account for over 90% of its primary chemical constituents, have been identified as the predominant compounds in rosin. Researchers have isolated approximately 50 compounds from rosin, with terpenoid rosin acids being the most prevalent. Furthermore, the review highlights the potential pharmacological activities of rosin and its constituents. Crude extracts and isolated rosin acids have demonstrated promising properties, including antimicrobial, anti-inflammatory, anti-tumor, insecticidal, wound healing, and anti-obesity effects. However, the review emphasizes that further research is needed, as existing studies are predominantly preliminary. Many of the reported bioactivities require further verification, and the underlying mechanisms of action remain largely unexplored. In conclusion, rosin has been extensively used in traditional medicine across different cultures, and its chemical composition has been confirmed to a significant extent. The pharmacological activities observed in crude extracts and isolated rosin acids support its traditional uses. Nevertheless, additional research is necessary to deepen our understanding of the pharmacological mechanisms underlying its effects.

Chitosan-based nanocomposite films with carnauba wax, rosin resin, and zinc oxide nanoparticles.

This work aimed to develop edible emulsion-based barriers in the form of chitosan composite films, with a focus on assessing the impacts of carnauba wax, rosin resin, and zinc oxide nanoparticles on their properties. Six films were produced by casting using chitosan as polymer base and glycerol as plasticizer. Acetic acid and polysorbate 80 were also used to facilitate the dissolution and mixing of the components. The six filmogenic solutions contained chitosan at 1.2% w/v, wax or resin content with 0 or 0.6% m/v and ZnO with 0 or 0.05% m/v. The dried films were characterized according to their chemical, barrier, mechanical, thermal and optical properties. All treatments resulted in flexible films. Chitosan films appeared smoother and more uniform under SEM imaging, while carnauba wax films displayed roughness due to their hydrophobic nature. Wax and resin films were less transparent and water soluble than the chitosan-only films. On the other hand, the addition of ZnO in the formulations increased the solubility of the films. The sorption degree was in line with the solubility results, i.e., films with ZnO presented higher sorption degree and solubility values. All treatments showed low or non-light UV transmission, indicating that the films provide good barrier to UV light. In the visible light region, films of resin with ZnO showed the lowest transmittance values, hence offering a good barrier to visible light. Among the evaluated films, chitosan, and resin films with ZnO nanoparticles were more rigid and resistant to deformation. Overall, films produced with rosin resin and ZnO nanoparticles showed potential improvements in barrier, mechanical, thermal, and optical properties, mainly due to their low water solubility, good UV protection and low permeability to water vapor and oxygen, which are suitable for using in formulations, intended to produce edible films and coatings.