Ambulatory Surgery Centers Reduce Patient Out-of-Pocket Expenditures for Isolated Arthroscopic Rotator Cuff Repair, but Patient Out-of-Pocket Expenditures Are Increasing at a Faster Rate Than Total Healthcare Utilization Reimbursement From Payers.

PURPOSE: To categorize and trend annual out-of-pocket expenditures for arthroscopic rotator cuff repair (RCR) patients relative to total healthcare utilization (THU) reimbursement and compare drivers of patient out-of-pocket expenditures (POPE) in a granular fashion via analyses by insurance type and surgical setting. METHODS: Patients who underwent outpatient arthroscopic RCR in the United States from 2013 to 2018 were identified from the IBM MarketScan Database. Primary outcome variables were total POPE and THU reimbursement, which were calculated for all claims in the 9-month perioperative period. Trends in outcome variables over time and differences across insurance types were analyzed. Multivariable analysis was performed to investigate drivers of POPE. RESULTS: A total of 52,330 arthroscopic RCR patients were identified. Between 2013 and 2018, median POPE increased by 47.5% ($917 to $1,353), and median THU increased by 9.3% ($11,964 to $13,076). Patients with high deductible insurance plans paid $1,910 toward their THU, 52.5% more than patients with preferred provider plans ($1,253, P = .001) and 280.5% more than patients with managed care plans ($502, P = .001). All components of POPE increased over the study period, with the largest observed increase being POPE for the immediate procedure (P = .001). On multivariable analysis, out-of-network facility, out-of-network surgeon, and high-deductible insurance most significantly increased POPE. CONCLUSIONS: POPE for arthroscopic RCR increased at a higher rate than THU over the study period, demonstrating that patients are paying an increasing proportion of RCR costs. A large percentage of this increase comes from increasing POPE for the immediate procedure. Out-of-network facility status increased POPE 3 times more than out-of-network surgeon status, and future cost-optimization strategies should focus on facility-specific reimbursements in particular. Last, ambulatory surgery centers (ASCs) significantly reduced POPE, so performing arthroscopic RCRs at ASCs is beneficial to cost-minimization efforts. CLINICAL RELEVANCE: This study highlights that although payers have increased reimbursement for RCR, patient out-of-pocket expenditures have increased at a much higher rate. Furthermore, this study elucidates trends in and drivers of patient out-of-pocket payments for RCR, providing evidence for development of cost-optimization strategies and counseling of patients undergoing RCR.

Clinical effect of modified anterolateral acromioarthroplasty during arthroscopic rotator cuff repair.

BACKGROUND: This study aimed to compare the clinical effect of modified anterolateral and traditional acromioplasty in arthroscopic rotator cuff repair. METHODS: The clinical data of 92 patients with total rotator cuff tears admitted to the Department of Joint Surgery of Jinhua Central Hospital from January 2016 to December 2019 were retrospectively analyzed. Among them, 42 patients underwent traditional acromioplasty during arthroscopic rotator cuff repair, and 50 underwent modified anterolateral acromioplasty. Patients were evaluated for preoperative and postoperative shoulder function, pain and critical shoulder angle, and incidence of rotator cuff re-tear at 12 months postoperatively. RESULTS: The preoperative general data of patients in the classic and modified anterolateral acromioplasty groups did not differ significantly (P > 0.05) and were comparable. The UCLA, ASES, and Constant shoulder joint scores were significantly improved in both groups. The VAS score was significantly decreased at 12 months postoperative than preoperative, with a statistically significant difference (P ≤ 0.05). Shoulder function and pain scores did not differ significantly between the two groups at 12 months postoperatively (P > 0.05). The CSA did not differ significantly between preoperative and postoperative 12 months in the traditional acromioplasty group (P > 0.05). However, 12 months postoperative CSA in the modified anterolateral acromioplasty group was significantly smaller than the preoperative CSA, with a statistically significant difference (P ≤ 0.05). The rates of rotator cuff re-tears were 16.67% (7/42) and 4% (2/50) in the two groups at 12 months postoperatively, respectively, with statistically significant differences (P ≤ 0.05). CONCLUSIONS: Traditional and modified anterolateral acromioplasty while treating total rotator cuff tears using arthroscopic rotator cuff repair significantly improves shoulder joint function. However, modified anterolateral acromioplasty significantly reduced the CSA value and decreased the incidence of rotator cuff re-tears.

Comparison of the clinical efficacy and prognosis of the two techniques for treating partial articular-sided supraspinatus tendon tears under arthroscopy.

BACKGROUND: At present, shoulder arthroscopy is usually used for treatment of rotator cuff injuries. There is still debate over the precise technique of using shoulder arthroscopy to treat partial articular-sided supraspinatus tendon injuries. OBJECTIVE: To compare the clinical efficacy of the arthroscopic transtendon repair method and the arthroscopic full-thickness repair method in the treatment of patients with Ellman III partial articular-sided supraspinatus tendon tears and to analyze the influencing factors of postoperative efficacy. STUDY DESIGN: Cohort study; level of evidence,4. METHODS: A total of 84 partial-thickness rotator cuff tear (PTRCT) patients with Ellman III injuries who underwent surgical treatment in our hospital between January 2017 and January 2020 were selected and divided into the arthroscopic trans-tenon repair group (32 cases) and the arthroscopic full-thickness repair group (52 cases). Shoulder joint pain and functional status were assessed by the Constant score, ASES score and VAS score; shoulder mobility was assessed by measuring shoulder ROM. The clinical outcomes of the two groups of patients were compared, and the factors affecting the postoperative efficacy of the patients were investigated. RESULTS: All patients were followed up for at least 2 years. The Constant score, ASES score, and VAS score of the two groups of patients were all improved compared with those before surgery, and the differences were statistically significant (P < 0.05). There were no significant differences in the Constant score, ASES score, or VAS score between the two groups (P > 0.05). The results of binary logistic regression analysis showed that the preoperative ASES score and whether biceps tenotomy was performed were independent risk factors for satisfactory postoperative efficacy (P < 0.05). CONCLUSION: For patients with Ellman III partial articular-sided supraspinatus tendon tears, the arthroscopic transtendon repair method and the arthroscopic full-thickness repair method can both significantly improve the shoulder pain and function of the patient, but there is no significant difference between the efficacy of the two surgical methods. The preoperative ASES score and whether biceps tenotomy was performed were independent risk factors for satisfactory postoperative efficacy in PTRCT patients with Ellman III injury.

Python tooth-inspired fixation device for enhanced rotator cuff repair.

Rotator cuff repair surgeries fail frequently, with 20 to 94% of the 600,000 repairs performed annually in the United States resulting in retearing of the rotator cuff. The most common cause of failure is sutures tearing through tendons at grasping points. To address this issue, we drew inspiration from the specialized teeth of snakes of the Pythonoidea superfamily, which grasp soft tissues without tearing. To apply this nondamaging gripping approach to the surgical repair of tendon, we developed and optimized a python tooth-inspired device as an adjunct to current rotator cuff suture repair and found that it nearly doubled repair strength. Integrated simulations, 3D printing, and ex vivo experiments revealed a relationship between tooth shape and grasping mechanics, enabling optimization of the clinically relevant device that substantially enhances rotator cuff repair by distributing stresses over the attachment footprint. This approach suggests an alternative to traditional suturing paradigms and may reduce the risk of tendon retearing after rotator cuff repair.

Skilled reaching test for shoulder function assessment in a rat model of rotator cuff tear: a pilot study.

BACKGROUND: Functional assessments are crucial to evaluate treatment outcomes in clinical and animal studies on rotator cuff injuries. While gait analysis is commonly used to assess animal models of rotator cuff tears, it is less relevant for human patients as the human shoulder is typically assessed in a non-weight-bearing condition. The present study introduces the skilled reaching test as a shoulder functional assessment tool for rats, which allows for evaluation without weight bearing. METHODS: In the control group, 8 male Sprague-Dawley rats received rotator cuff tear surgery without repair. In the rotator cuff repair group, 20 rats received rotator cuff repair at 4 weeks post rotator cuff tear. For the skilled reaching test, rats were trained to extend their forelimbs to fetch food pellets, and the number of trials, number of attempts and the success rate were recorded. The gait analysis and skilled reaching test were performed at baseline, 4 weeks post-tear, 1, 2, 4, and 8 weeks post-repair. The repeated measures analysis of variance was used to evaluate the effects of time on the shoulder function. The significance level was set at 0.05. RESULTS: The skilled reaching test required 216 h to conduct, while the gait analysis took 44 h. In the rotator cuff repair group, gait performance significantly deteriorated at 1 week post-repair and restored to 4 weeks post-tear levels at 4 weeks post-repair. Regarding the skilled reaching test, the number of attempts, number of trials and the success rate decreased at 1 week post-repair. Subsequently, there was a brief rebound in performance observed at 2 weeks post-repair, followed by a continued decline in the number of attempts and trials. By 8 weeks post-repair, only the success rate had restored to levels similar to those observed at 4 weeks post-tear. CONCLUSION: The skilled reaching test can detect functional deficiencies following rotator cuff tear and repair, while it requires high time and labour costs.

A Biological Spacer to Treat Irreparable Rotator Cuff Tears: A Biomechanical Study Utilizing a Secured Versus Unsecured Tensor Fascia Lata Graft.

BACKGROUND: Designed to help treat pain and loss of function after rotator cuff repair, allograft spacer procedures utilize a graft to act as a spacer in the subacromial space, decreasing pain from impingement of the greater tuberosity on the acromion at the extremes of overhead motion. PURPOSE: To evaluate the biomechanical characteristics of secured versus unsecured tensor fascia lata allografts used in an allograft spacer procedure. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 8 fresh-frozen cadaveric shoulder specimens were used. There were 4 conditions tested: (1) intact rotator cuff, (2) stage III rotator cuff tear (complete supraspinatus tendon and superior one-half of the infraspinatus tendon), (3) unsecured tensor fascia lata graft, and (4) secured tensor fascia lata graft. Both superior and posterior translation of the humeral head were calculated in each condition. A 4-cm × 5-cm × 6-mm tensor fascia lata graft was used in the subacromial space to act as a spacer. Grafts were secured at the lateral edge of the native rotator cuff footprint with 2 knotless anchors. RESULTS: With unbalanced loading, both secured and unsecured grafts varied in their ability to limit superior and posterior translation at various rotation angles back to levels seen with intact rotator cuffs at 0° and 20° of abduction. During balanced loading, both unsecured and secured grafts limited superior and posterior translation more than those seen in the rotator cuff-deficient condition (P < .01) and similar to those seen in the intact condition (P > .05). The secured and unsecured grafts allowed similar amounts of translation at every position with both unbalanced and balanced loading (P > .05). Finally, total graft motion was <7 mm in all positions. CONCLUSION: Unsecured tensor fascia lata grafts were biomechanically equivalent to secured grafts when used during allograft spacer procedures. CLINICAL RELEVANCE: While both grafts were successful at limiting superior and posterior translation of the humeral head during early range of motion, the unsecured graft represents a cheaper, easier option to utilize during allograft spacer procedures.

Supraspinatus Muscle and Tendon Characteristics 1 Year After Surgical Rotator Cuff Repair Compared With Contralateral Shoulder: Data From the CUT-N-MOVE Trial.

BACKGROUND: It is necessary to better understand the structural characteristics of the supraspinatus tendon and associated muscle after rotator cuff repair and in the event of retear. PURPOSE: To study structural differences between the repaired and contralateral shoulders 1 year after rotator cuff repair in patients who received either progressive exercise therapy (PR) or usual care (UC) in a randomized controlled trial and to investigate whether there was interaction with tendon retear and limb dominance. STUDY DESIGN: Cohort study; Level of evidence, 2. METHODS: Patients with surgically repaired traumatic full-thickness rotator cuff tears involving the supraspinatus tendon were included. After surgery, they were randomized to PR or UC (active from postoperative week 2 or 6, respectively). The subacromial structures (acromiohumeral distance, supraspinatus tendon thickness, and vascularity) and the supraspinatus muscle thickness were examined with ultrasound at the 1-year follow-up. RESULTS: A total of 79 patients were included. The characteristics of the 2 intervention groups (PR and UC) were comparable, including the Western Ontario Rotator Cuff Index score and number of retears. The authors found significantly thinner supraspinatus tendon (PR, P < .001; UC, P = .003) and reduced acromiohumeral distance (PR, P = .023; UC, P = .025) in the repaired versus the contralateral shoulders in both intervention groups. For neovascularization, there was no interlimb difference in either of the groups or between groups (PR vs UC). In patients with intact tendons, there was no interlimb difference in the muscle thickness, but in patients with tendon retear the muscle was significantly thinner on the repaired side (P = .024 and P < .001, respectively). When the dominant supraspinatus tendon was repaired (both groups), it was significantly thinner than the nondominant healthy tendon, but this difference was not seen when the nondominant supraspinatus tendon was repaired (P = .006). CONCLUSION: One year after rotator cuff surgery, the repaired supraspinatus tendon was significantly thinner and the corresponding acromiohumeral distance was reduced. In patients with retear, the supraspinatus muscle was significantly thinner on the repaired side and early initiation of tendon-loading exercises did not affect these findings. REGISTRATION: NCT02969135 (ClinicalTrials.gov identifier).

Tuberoplasty reduces resistance force in dynamic shoulder abduction for irreparable rotator cuff tears: a cadaveric biomechanical study.

BACKGROUND: Arthroscopic tuberoplasty is an optional technique for managing irreparable rotator cuff tears. However, there is a lack of studies investigating the resistance force during shoulder abduction in cases of irreparable rotator cuff tears and tuberoplasty. HYPOTHESES: In shoulders with irreparable rotator cuff tears, impingement between the greater tuberosity (GT) and acromion increases the resistance force during dynamic shoulder abduction. Tuberoplasty is hypothesized to reduce this resistance force by mitigating impingement. STUDY DESIGN: Controlled laboratory study. METHODS: Eight cadaveric shoulders, with a mean age of 67.75 years (range, 63-72 years), were utilized. The testing sequence included intact rotator cuff condition, irreparable rotator cuff tears (IRCTs), burnishing tuberoplasty, and prosthesis tuberoplasty. Burnishing tuberoplasty refers to the process wherein osteophytes on the GT are removed using a bur, and the GT is subsequently trimmed to create a rounded surface that maintains continuity with the humeral head. Deltoid forces and actuator distances were recorded. The relationship between deltoid forces and actuator distance was graphically represented in an ascending curve. Data were collected at five points within each motion cycle, corresponding to actuator distances of 20 mm, 30 mm, 40 mm, 50 mm, and 60 mm. RESULTS: In the intact rotator cuff condition, resistance forces at the five points were 34.25 ± 7.73 N, 53.75 ± 7.44 N, 82.50 ± 14.88 N, 136.25 ± 30.21 N, and 203.75 ± 30.68 N. In the IRCT testing cycle, resistance forces were 46.13 ± 7.72 N, 63.75 ± 10.61 N, 101.25 ± 9.91 N, 152.5 ± 21.21 N, and 231.25 ± 40.16 N. Burnishing tuberoplasty resulted in resistance forces of 32.25 ± 3.54 N, 51.25 ± 3.54 N, 75.00 ± 10.69 N, 115.00 ± 10.69 N, and 183.75 ± 25.04 N. Prosthesis tuberoplasty showed resistance forces of 29.88 ± 1.55 N, 49.88 ± 1.36 N, 73.75 ± 7.44 N, 112.50 ± 7.07 N, and 182.50 ± 19.09 N. Both forms of tuberoplasty significantly reduced resistance force compared to IRCTs. Prosthesis tuberoplasty further decreased resistance force due to a smooth surface, although the difference was not significant compared to burnishing tuberoplasty. CONCLUSION: Tuberoplasty effectively reduces resistance force during dynamic shoulder abduction in irreparable rotator cuff tears. Prosthesis tuberoplasty does not offer a significant advantage over burnishing tuberoplasty in reducing resistance force. CLINICAL RELEVANCE: Tuberoplasty has the potential to decrease impingement, subsequently reducing resistance force during dynamic shoulder abduction, which may be beneficial in addressing conditions like pseudoparalysis.

Comparison of functional outcomes following early and delayed arthroscopic repair for traumatic and non-traumatic rotator cuff injuries.

BACKGROUND: The effects of the timing of surgical repair on the outcomes of traumatic and non-traumatic rotator cuff injuries (RCI) remain elusive. Thus, this study aimed to compare differences in outcomes following the repair of traumatic and non-traumatic RCI at varying time points. METHODS: The study population comprised 87 patients with traumatic and non-traumatic RCI who underwent arthroscopic rotator cuff repair and were followed up for a minimum of 6 months. Next, the trauma and the non-trauma groups were stratified into subgroups according to the time of injury (early repair: occurring within 3 months; delayed repair: occurring after 3 months). Measurements before and after surgical interventions were compared to evaluate the effect of the duration of RCI on the functional status of patients in the trauma and non-trauma groups. Primary evaluation indices included the Visual Analog Scale (VAS) pain score, American Shoulder and Elbow Surgeons (ASES) score, Constant shoulder function score, and the University of California, Los Angeles (UCLA) shoulder score. Secondary evaluation indices consisted of shoulder range of motion (ROM), postoperative rotator cuff retear rate, and incidence of joint stiffness. RESULTS: Among the 40 patients in the trauma group, 22 underwent early repair, whereas the remaining 18 underwent delayed repair. In the non-trauma group consisting of 47 patients, 18 underwent early repair, whereas the remaining 29 underwent delayed repair. The minimum clinical follow-up time was 6 months, with an average follow-up time of 10.2 months. During postoperative follow-up, 1 and 6 patients who underwent early and delayed repair experienced re-tear in the trauma group, respectively. Contrastingly, 3 and 8 patients who underwent early and delayed repair presented with re-tear in the non-trauma group, respectively. CONCLUSION: Early repair of traumatic RCI yielded superior outcomes, including improved range of motion, lower pain symptoms, and lower risk of postoperative re-tears compared to delayed repair. Additionally, non-surgical treatment is recommended as the preferred approach for patients with non-traumatic RCI.

Bone Marrow Stimulation Does Not Lead to Lower Retear Rates, Better Functional Outcomes, or Higher Complication Rates at Short-Term Follow-Up for Arthroscopic Rotator Cuff Repair: A Meta-analysis of Randomized Controlled Trials.

PURPOSE: To determine the effect of bone marrow stimulation (BMS) on retear rates, functional outcomes, and complication rates in patients who underwent arthroscopic rotator cuff repair (RCR) through a meta-analysis of randomized controlled trials. METHODS: PubMed, EMBASE, Web of Science, and The Cochrane Library were searched on March 25, 2023. Two evaluators independently screened the literature, extracted data, and assessed the methodologic quality of the enrolled studies. Meta-analysis was conducted using RevMan software, version 5.4. RESULTS: A total of 7 randomized controlled trials with 638 patients were included. The evaluation of rotator cuff tendon integrity was conducted using distinct imaging modalities. Specifically, 259 patients underwent magnetic resonance imaging whereas 208 patients underwent ultrasound. Additionally, a subset of 95 patients underwent either of these modalities; however, the precise distribution between these 2 modalities was not explicitly delineated. Compared with RCR alone, RCR combined with BMS provided similar retear rates (P = .51, I2 = 46%), Constant-Murley scores (P = .14, I2 = 0%), American Shoulder and Elbow Surgeons (standardized shoulder assessment form) scores (P = .56, I2 = 0%), Western Ontario Rotator Cuff Index scores (P = .20, I2 = 0%), visual analog scale scores (P = .19, I2 = 0%), forward flexion (P = .18, I2 = 0%), external rotation (P = .62, I2 = 0%), severe complication rates (P = .56, I2 = 0%), and mild complication rates (P = .10, I2 = 0%). CONCLUSIONS: Compared with the outcomes observed after isolated arthroscopic RCR, arthroscopic RCR with BMS showed comparable results in terms of retear rate, functional outcomes, and incidence of complications. LEVEL OF EVIDENCE: Level II, meta-analysis of Level I and II studies.

The Subscapularis Healing Index: A New Scoring System for Predicting Subscapularis Healing After Arthroscopic Repair.

BACKGROUND: Previous research has emphasized the effect of prognostic factors on arthroscopic rotator cuff repair (ARCR) success, but a specific focus on subscapularis (SSC) tendon repair healing is lacking. PURPOSE: To identify prognostic factors for SSC healing after ARCR and develop the Subscapularis Healing Index (SSC-HI) by incorporating these factors. STUDY DESIGN: Case-control study; Level of evidence, 3. METHODS: This was a retrospective study using prospectively maintained data collected from patients with isolated or combined SSC tears who underwent ARCR between 2011 and 2021 at a single institution with a minimum 2-year follow-up. Functional outcomes were assessed using the American Shoulder and Elbow Surgeons (ASES) score, Subjective Shoulder Value (SSV), and visual analog scale (VAS) pain scale. SSC tendon healing was evaluated via ultrasound at the final follow-up. Multivariate logistic regression analysis was performed to determine the factors affecting SSC healing, and based on these factors, the SSC-HI, which ranges from 0 to 15 points, was developed using odds ratios (ORs). RESULTS: Among 1018 ARCR patients, 931 met the inclusion criteria; 279 returned voluntarily for postoperative SSC ultrasound assessment. The overall healing failure rate was 10.8% (30/279). Risk factors for healing failure included female sex (P = .008; OR, 3.119), body mass index (BMI) ≥30 (P = .053; OR, 2.323), supraspinatus fatty infiltration ≥3 (P = .033; OR, 3.211), lower SSC fatty infiltration ≥2 (P = .037; OR, 3.608), and Lafosse classification ≥3 (P = .007; OR, 3.224). A 15-point scoring system comprised the following: 3 points for female sex, 2 points for BMI ≥30, 3 points for supraspinatus fatty infiltration ≥3, 4 points for lower SSC fatty infiltration ≥2, and 3 points for Lafosse classification ≥3. Patients with ≤4 points had a 4% healing failure rate, while those with ≥9 points had a 55% rate of healing failure. Patients with a healed SSC reported significantly higher ASES (healed SSC: ΔASES, 44.7; unhealed SSC: ΔASES, 29; P < .01) and SSV (healed SSC: ΔSSV, 52.9; unhealed SSC: ΔSSV, 27.5; P < .01) and lower VAS (healed SSC: ΔVAS, -4.2; unhealed SSC: ΔVAS, -3; P < .01) scores compared with those with an unhealed SSC. CONCLUSION: The SSC-HI scoring system integrates clinical and radiological factors to predict SSC healing after surgical repair. Successful SSC healing was found to be associated with enhanced functional outcomes, underscoring the clinical relevance of SSC healing prediction in the management of these tears.

Current research trends on the effect of diabetes mellitus on rotator cuff tendon healing/tendinopathy.

Rotator cuff tendon tears are a leading cause of shoulder pain. They are challenging to treat, and tendon-bone healing has a high failure rate despite successful surgery. Tendons connect the muscles and bones, which make them important for the body's overall mobility and stability. Metabolic diseases, including diabetes or high blood pressure, can affect the healing process after repair of a damaged tendon. With a global incidence of 9.3%, diabetes is considered as a significant risk factor for rotator cuff tendon healing because it causes structural, inflammatory, and vascular changes in the tendon. However, the mechanisms of how diabetes affects tendon healing remain unknown. Several factors have been suggested, including glycation product accumulation, adipokine dysregulation, increased levels of reactive oxygen species, apoptosis, inflammatory cytokines, imbalanced matrix-metalloproteinase-to-tissue-inhibitor ratio, and impaired angiogenesis and differentiation of the tendon sheath. Despite the effects of diabetes on tendon function and healing, few treatments are available to improve recovery in these patients. This review summarizes the current literature on the pathophysiological changes of the tendon in diabetes and hyperlipidemia. Preclinical and clinical evidence regarding the association between diabetes and tendon healing is presented. Moreover, current approaches to improve tendon healing in patients with diabetes are reviewed.

The effect of rehabilitation time on functional recovery after arthroscopic rotator cuff repair: a systematic review and meta-analysis.

Objective: We compared the effects of early and delayed rehabilitation on the function of patients after rotator cuff repair by meta-analysis to find effective interventions to promote the recovery of shoulder function. Methods: This meta-analysis was registered in PROSPERO (CRD42023466122). We manually searched the randomized controlled trials (RCTs) in the Cochrane Library, Pubmed, Cochrane Library, EMBASE, the China National Knowledge Infrastructure (CNKI), the China VIP Database (VIP), and the Wanfang Database to evaluate the effect of early and delayed rehabilitation after arthroscopic shoulder cuff surgery on the recovery of shoulder joint function. Review Manager 5.3 software was used to analyze the extracted data. Then, the PEDro scale was employed to appraise the methodological quality of the included research. Results: This research comprised nine RCTs and 830 patients with rotator cuff injuries. According to the findings of the meta-analysis, there was no discernible difference between the early rehabilitation group and the delayed rehabilitation group at six and twelve months after the surgery in terms of the VAS score, SST score, follow-up rotator cuff healing rate, and the rotator cuff retear rate at the final follow-up. There was no difference in the ASES score between the early and delayed rehabilitation groups six months after the operation. However, although the ASES score in the early rehabilitation group differed significantly from that in the delayed rehabilitation group twelve months after the operation, according to the analysis of the minimal clinically important difference (MCID), the results have no clinical significance. Conclusions: The improvement in shoulder function following arthroscopic rotator cuff surgery does not differ clinically between early and delayed rehabilitation. When implementing rehabilitation following rotator cuff repair, it is essential to consider the paradoxes surrounding shoulder range of motion and tendon anatomic healing. A program that allows for flexible progression based on the patient's ability to meet predetermined clinical goals or criteria may be a better option.

Factors affecting medium-term patient satisfaction after arthroscopic repair of small to medium-sized rotator cuff tears: An observational study.

This study aimed to assess the effect of the status of the tendon and patient factors on patient satisfaction after rotator cuff repair. Forty-six patients treated for tears with a minimum of 5-year follow-up were included. Gender, age, and active smoking status were recorded. Pain visual analogue scale, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, Simple Shoulder Test, and Single Assessment Numeric Evaluation were recorded preoperatively and at the last follow-up. Patients were divided into groups of highly satisfied (HS) and vaguely satisfied (VS) patients. Patients were evaluated with MRI both preoperatively and at their last follow-up. Of the 46 patients, 17 were HS and 29 were VS. The HS group had 7 re-ruptures, 4 of which were progressed tears, whereas the VS group had 15 re-ruptures, 4 of which were progressed tears. There was no difference in the rate of re-ruptures or progressed tears between groups. The HS group had a higher frequency of males. However, frequencies of active smoking or osteoarthritis of grade 2 or higher were lower in the HS group. It was shown that patient satisfaction after repair depends on patient-related factors like gender and smoking rather than tendon healing or degeneration.

Biomimetic gradient scaffolds for the tissue engineering and regeneration of rotator cuff enthesis.

Rotator cuff tear is one of the most common musculoskeletal disorders, which often results in recurrent shoulder pain and limited movement. Enthesis is a structurally complex and functionally critical interface connecting tendon and bone that plays an essential role in maintaining integrity of the shoulder joint. Despite the availability of advanced surgical procedures for rotator cuff repair, there is a high rate of failure following surgery due to suboptimal enthesis healing and regeneration. Novel strategies based on tissue engineering are gaining popularity in improving tendon-bone interface (TBI) regeneration. Through incorporating physical and biochemical cues into scaffold design which mimics the structure and composition of native enthesis is advantageous to guide specific differentiation of seeding cells and facilitate the formation of functional tissues. In this review, we summarize the current state of research in enthesis tissue engineering highlighting the development and application of biomimetic scaffolds that replicate the gradient TBI. We also discuss the latest techniques for fabricating potential translatable scaffolds such as 3D bioprinting and microfluidic device. While preclinical studies have demonstrated encouraging results of biomimetic gradient scaffolds, the translation of these findings into clinical applications necessitates a comprehensive understanding of their safety and long-term efficacy.

Subacromial Surgery for Irreparable Posterosuperior Rotator Cuff Tears.

The irreparable posterosuperior rotator cuff tear describes a tear of the supraspinatus and/or infraspinatus tendon that is massive, contracted, and immobile in both the anterior-posterior and medial-lateral directions. Patients with an intact subscapularis and preserved forward elevation are challenging to treat because there is not a consensus treatment algorithm. For low-demand, elderly patients, several subacromial surgical options are available that can provide pain relief without the risks or burden of rehabilitation posed by reverse total shoulder arthroplasty or a complex soft-tissue reconstruction (e.g., superior capsular reconstruction, tendon transfer, bridging grafts). Debridement, more specifically the "smooth-and-move" procedure, offers a reliable outcome with documented improvements in pain and function at long-term follow-up. Similarly, the biodegradable subacromial balloon spacer (InSpace; Stryker, Kalamazoo, MI) has been shown to significantly improve pain and function in patients who are not responsive to nonoperative treatment. Disease progression with these options is possible, with a small percentage of patients progressing to rotator cuff arthropathy. Biologic tuberoplasty and bursal acromial reconstruction are conceptually similar to the balloon spacer but instead use biologic grafts to prevent bone-to-bone contact between the humeral head and the acromion. Although there is no single gold standard treatment, the variety of surgical techniques allows patients and surgeons to effectively manage these challenging situations.

Translational Research on Orthobiologics in the Treatment of Rotator Cuff Disease: From the Laboratory to the Operating Room.

Rotator cuff disease is one of the most common human tendinopathies and can lead to significant shoulder dysfunction. Despite efforts to improve symptoms in patients with rotator cuff tears and healing rates after rotator cuff repair, high rates of failed healing and persistent shoulder morbidity exist. Increasing interest has been placed on the utilization of orthobiologics-scaffolds, cell-based augmentation, platelet right plasma (platelet-rich plasma), and small molecule-based strategies-in the management of rotator cuff disease and the augmentation of rotator cuff repairs. This is a complex topic that involves novel treatment strategies, including patches/scaffolds, small molecule-based, cellular-based, and tissue-derived augmentation techniques. Ultimately, translational research, with a particular focus on preclinical models, has allowed us to gain some insights into the utility of orthobiologics in the treatment of rotator cuff disease and will continue to be critical to our further understanding of the underlying cellular mechanisms moving forward.

The effect of video-assisted training on upper extremity problems and functions after rotator cuff repair: a randomized controlled trial.

Background/aim: The shoulder is the most mobile joint in the body, and is frequently exposed to injuries. The applied surgical treatments, protection of the shoulder after surgery, care in the use of the shoulder in activities of daily living (ADLs) and gradual exercise programs are all vital to the recovery process. The present study investigates the effect of video-assisted training (VAT) on upper extremity complications and functions after rotator cuff repair (RCR). Materials and method: Included in this prospective, parallel two-armed, randomized controlled study were an experimental group (n: 24) that received VAT detailing early postoperative care for RCR and instructions on performing ADLs, and that had access to a 90-day gradual exercise program, and a control group (n: 24) that received routine care. The primary outcomes were upper extremity problems and functions, as assessed by the Disabilities of the Arm, Shoulder and Hand (DASH) and modified Constant-Murley scores (MCM), while secondary outcomes were complications that had developed within the past three months. The outcomes were measured at baseline, after six weeks and at three months. Results: After 3 months, a statistically significant difference was noted in the DASH-Work (p = 0.001) and MCM ADLs scores (p = 0.003) of the two groups, and significant changes in which the scale scores of both groups when compared to the initial measurement. Only one patient in the VAT group developed complications after RCR at one month; there were no significant differences in the complications of the two groups (p = 0.235). Conclusion: VAT can increase function in RCR patients. Healthcare professionals, especially nurses, can use the VAT method to improve shoulder function in patients after RCR.

The Fate of the Shoulder Post Rotator Cuff Repair: Biomechanical Properties of the Supraspinatus Tendon and Surrounding Structures.

The study aimed to describe the changes in biomechanical properties of the supraspinatus tendon, deltoid muscle, and humeral head post arthroscopic rotator cuff repair using shear wave elastography. Shear wave velocity of the tendon, deltoid, and humeral head of 48 patients was measured at predetermined sites at 1 week, 6 weeks, 12 weeks, 6 months, and 12 months post repair. One-way ANOVA with Tukey's correction and Spearman's correlation were performed. Mean±SEM healing tendon stiffness, adjacent to tendon footprint, increased from 1 week (6.2±0.2 m/s) to 6 months (7.5±0.3 m/s) and 12 months (7.8±0.3 m/s) (P<0.001). Mean±SEM deltoid muscle stiffness was higher at 12 months (4.1±0.2 m/s) compared to 1 week (3.4±0.1 m/s) and 12 weeks (3.5±0.1 m/s) (P<0.05). Humeral head stiffness did not change. Following arthroscopic rotator cuff repair, supraspinatus tendon stiffness increased in a curvilinear fashion over 6 months. From 6 months, deltoid muscle stiffness increased, corresponding to when patients were instructed to return to normal activities.