A reproducible approach for the use of aptamer libraries for the identification of Aptamarkers for brain amyloid deposition based on plasma analysis.

An approach for the agnostic identification and validation of aptamers for the prediction of a medical state from plasma analysis is presented in application to a key risk factor for Alzheimer's disease. brain amyloid deposition. This method involved the use of a newly designed aptamer library with sixteen random nucleotides interspersed with fixed sequences called a Neomer library. The Neomer library approach enables the direct application of the same starting library on multiple plasma samples, without the requirement for pre-enrichment associated with the traditional approach. Eight aptamers were identified as a result of the selection process and screened across 390 plasma samples by qPCR assay. Results were analysed using multiple machine learning algorithms from the Scikit-learn package along with clinical variables including cognitive status, age and sex to create predictive models. An Extra Trees Classifier model provided the highest predictive power. The Neomer approach resulted in a sensitivity of 0.88. specificity of 0.76. and AUC of 0.79. The only clinical variables that were included in the model were age and sex. We conclude that the Neomer approach represents a clear improvement for the agnostic identification of aptamers (Aptamarkers) that bind to unknown biomarkers of a medical state.

Truncations and in silico docking to enhance the analytical response of aptamer-based biosensors.

Aptamers are short oligonucleotides capable of binding specifically to various targets (i.e., small molecules, proteins, and whole cells) which have been introduced in biosensors such as in the electrochemical aptamer-based (E-AB) sensing platform. E-AB sensors are comprised of a redox-reporter-modified aptamer attached to an electrode that undergoes, upon target addition, a binding-induced change in electron transfer rates. To date, E-AB sensors have faced a limitation in the translatability of aptamers into the sensing platform presumably because sequences obtained from Systematic Evolution of Ligands by Exponential Enrichment (SELEX) are typically long (>80 nucleotides) and that obtaining structural information remains time and resource consuming. In response, we explore the utility of aptamer base truncations and in silico docking to improve their translatability into E-AB sensors. Here, we first apply this to the glucose aptamer, which we characterize in solution using NMR methods to guide design and translate truncated variants in E-AB biosensors. We further investigated the applicability of the truncation and computational approaches to four other aptamer systems (vancomycin, cocaine, methotrexate and theophylline) from which we derived functional E-AB sensors. We foresee that our strategy will increase the success rate of translating aptamers into sensing platforms to afford low-cost measurements of molecules directly in undiluted complex matrices.

Process, advances, and perspectives of graphene oxide-SELEX for the development of aptamer molecular probes: A comprehensive review.

BACKGROUND: Aptamers are screened via the systematic evolution of ligands by exponential enrichment (SELEX) and are widely used in molecular diagnostics and targeted therapies. The development of efficient and convenient SELEX technology has facilitated rapid access to high-performance aptamers, thereby advancing the aptamer industry. Graphene oxide (GO) serves as an immobilization matrix for libraries in GO-SELEX, making it suitable for screening aptamers against diverse targets. RESULTS: This review summarizes the detailed steps involved in GO-SELEX, including monitoring methods, various sublibrary acquisition methods, and practical applications from its inception to the present day. In addition, the potential of GO-SELEX in the development of broad-spectrum aptamers is explored, and its current limitations for future development are emphasized. This review effectively promotes the application of the GO-SELEX technique by providing valuable insights and assisting researchers interested in conducting related studies. SIGNIFICANCE AND NOVELTY: To date, no review on the topic of GO-SELEX has been published, making it challenging for researchers to initiate studies in this area. We believe that this review will broaden the SELEX options available to researchers, ensuring that they can meet the growing demand for molecular probes in the scientific domain.

Cell-SELEX and application research of a DNA aptamer against esophageal squamous cell carcinoma (ESCC) cell line TE-1.

Esophageal cancer is a common cancer with high morbidity and mortality that severely threatens the safety and quality of human life. The strong metastatic nature of esophageal cancer enables it to metastasize more quickly and covertly, making it difficult for current diagnostic and treatment methods to achieve efficient early screening, as well as timely and effective treatment. As a promising solution, nucleic acid aptamers, a kind of special single-stranded DNA or RNA oligonucleotide selected by the Systematic Evolution of Ligands by Exponential Enrichment (SELEX) technology, can specifically bind with different molecular targets. In this paper, random DNA single-stranded oligonucleotides were used as the initial library. Using TE-1 cells and HEEC cells as targets, specific binding sequences were selected by 15 rounds of the cell-SELEX method, and the aptamer sequence that binds to TE-1 cells with the most specificity was obtained and named Te4. The Te4 aptamer was further validated for binding specificity, binding affinity, type of target, in vitro cytotoxicity when conjugated with DOX(Te4-DOX), and in vivo distribution. Results of in vitro validation showed that Te4 has outstanding binding specificity with a Kd value of 51.16 ± 5.52 nM, and the target type of Te4 was preliminarily identified as a membrane protein. Furthermore, the cytotoxicity experiment showed that Te4-DOX has specific cytotoxicity towards cultured TE-1 cells. Finally, the results of the in vivo distribution experiment showed that the Te4 aptamer is able to specifically target tumor regions in nude mice, showing great potential to be applied in future diagnosis and targeted therapy of esophageal cancer.

Genomic SELEX Screening of Regulatory Targets of Transcription Factors.

The genome of Escherichia coli K-12 is transcribed by a single species of RNA polymerase. The selectivity of transcriptional targets is determined via interaction with one of seven species of the sigma subunit and a total of approximately 300 species of transcription factor (TFs). For comprehensive identification of the regulatory targets of these two groups of regulatory proteins on the genome, we developed an in vitro approach, "Genomic SELEX" (gSELEX) screening. Here we describe a detailed protocol of the gSELEX screening system, which uses purified regulatory proteins and fragments of genomic DNA from E. coli. Moreover, we describe methods and examples of results using cell-free synthetic proteins.

New Insights into Aptamers: An Alternative to Antibodies in the Detection of Molecular Biomarkers.

Aptamers are short oligonucleotides with single-stranded regions or peptides that recently started to transform the field of diagnostics. Their unique ability to bind to specific target molecules with high affinity and specificity is at least comparable to many traditional biorecognition elements. Aptamers are synthetically produced, with a compact size that facilitates deeper tissue penetration and improved cellular targeting. Furthermore, they can be easily modified with various labels or functional groups, tailoring them for diverse applications. Even more uniquely, aptamers can be regenerated after use, making aptasensors a cost-effective and sustainable alternative compared to disposable biosensors. This review delves into the inherent properties of aptamers that make them advantageous in established diagnostic methods. Furthermore, we will examine some of the limitations of aptamers, such as the need to engage in bioinformatics procedures in order to understand the relationship between the structure of the aptamer and its binding abilities. The objective is to develop a targeted design for specific targets. We analyse the process of aptamer selection and design by exploring the current landscape of aptamer utilisation across various industries. Here, we illuminate the potential advantages and applications of aptamers in a range of diagnostic techniques, with a specific focus on quartz crystal microbalance (QCM) aptasensors and their integration into the well-established ELISA method. This review serves as a comprehensive resource, summarising the latest knowledge and applications of aptamers, particularly highlighting their potential to revolutionise diagnostic approaches.

Combination of Capture-SELEX and Post-SELEX for procymidone-specific aptamer selection and broad-specificity aptamer discovery, and development of aptamer-based lateral flow assay.

BACKGROUND: Due to its wide application, procymidone has become one of the pesticides with high detection rates in supervision and sampling. Therefore, it is necessary to establish a rapid and efficient method for the detection of procymidone. However, an important bottleneck restricting the development of rapid detection methods of procymidone is that its specific recognition elements are rarely reported. In this work, Capture-SELEX and post-SELEX were used in aptamer screening, and the obtained aptamers were used to construct an aptamer-based lateral flow assay (LFA). RESULTS: Firstly, a specific aptamer Seq15 was obtained for procymidone by Capture-SELEX, and its dissociation constant (Kd) was 24.22 nM. Secondly, post-SELEX was used to analyze and modify Seq15 to improve its performance, and the Kd of the truncated sequence Seq15-2 was 21.28 nM. In addition to this, the broad-specificity aptamer Seq17-1 was obtained via post-SELEX. Seq17-1 could broadly recognize dicarboximide fungicides (procymidone, iprodione, chlozolinate, dimethachlon and vinclozolin) and their metabolic derivative (3,5-dichloroaniline). Finally, the specific aptamer-based LFA of procymidone was constructed, and the limit of detection (LOD) was 0.79 ng/mL. Meanwhile, the LODs of dicarboximide fungicides and their metabolic derivative were 0.62, 0.64, 0.71, 0.69, 0.64 and 0.66 ng/mL, respectively. The above LFAs were highly specific and stable, and had been successfully used for the detection of vegetable samples. SIGNIFICANCE: Under the combination of Capture-SELEX and Post-SELEX, this study not only provides specific recognition elements for rapid detection of procymidone, but also provides new ideas for the discovery of broad-specificity aptamers. Combining broad-specificity primary detection and single-specificity quantification, a composite aptamer-based LFA detection platform has been developed, which significantly improves detection efficiency.

An aptamer-based fluorometric method for the rapid berberine detection in Kampo medicines.

BACKGROUND: Berberine (BBR), a key component in Kampo medicine, is a cationic benzylisoquinoline alkaloid whose detection plays a critical role in the quality control of these traditional remedies. Traditional methods for detecting BBR often involve complex procedures, which can be time-consuming and costly. To address this challenge, our study focuses on developing a simpler, faster, and more efficient detection method for BBR in Kampo medicine formulations. RESULTS: We successfully developed a rapid fluorometric detection method for BBR using colloidal gold nanoparticle-based systematic evolution of ligands by exponential enrichment (GOLD-SELEX). Initially, specific single-stranded DNA (ssDNA) sequences were selected for their ability to enhance BBR's fluorescence intensity. The optimal ssDNA sequence, identified as BBR38, was further truncated to produce BBR38S, a stem-loop ssDNA that improved fluorescence upon interaction with BBR. To further enhance the fluorescence, the BBR38S aptamer underwent additional modifications, including stem truncation and nucleotide mutations, resulting in the higher fluorescence variant BBR38S-3 A10C. The final product, TetBBR38S, a tetramer version of BBR38S-3 A10C, exhibited a linear detection range of 0.780-50.0 µg mL-1 and a limit of detection of 0.369 µg mL-1. The assay demonstrated sufficient selectivity and was successfully applied to analyze 128 different Kampo medicine formulations, accurately detecting BBR content with high precision. SIGNIFICANCE: This study represents an advancement in Kampo medicine research, marking the first successful application of an aptamer-based approach for BBR detection in complex matrices. The developed method is not only simple and rapid (with a detection time of 5 min) but also cost-effective, which is crucial for widespread application.

DNA Meets Protein─Development, Characterization, and Application of Aptamers against Peanut Allergen.

Allergen detection methods support food labeling and quality assessment at the allergen component level of allergen preparations used for allergy diagnosis and immunotherapy (AIT). Commonly applied enzyme-linked immunosorbent assay (ELISA) requires animal antibodies but potentially shows batch variations. We developed synthetic aptamers as alternative binders in allergen detection to meet the replacement, reduction, and refinement (3R) principle on animal protection in science. ssDNA aptamers were specifically selected against the major peanut allergen Ara h 1 and identified by next-generation sequencing. Application in various detection systems (ELISA-like assays, western blot, and surface plasmon resonance) was demonstrated. The ELISA-like assay comprised a sensitivity of 10 ng/mL Ara h 1, comparable to published antibody-based ELISA, and allowed Ara h 1 detection in various peanut flours, similar to those used in peanut AIT as well as in processed food. This ELISA-like aptamer-based assay proofs antibody-free allergen detection for food labeling or quality assessment of diagnostic and therapeutic allergen products.

A novel dual-recognition fluorescent biosensor for sialyl-Lewisx sensitive detection.

Sialyl-Lewisx (SLex) is a tetrasugar, which plays an important role in initial inflammation and cancer cell metastasis, and can be used as a marker for cancer diagnosis and prognosis or a therapeutic target. Detecting SLex from complex biological media remains a significant challenge. Herein, a single-stranded DNA aptamer of SLex was screened based on the double-stranded DNA library-modified magnetic bead (MB)-SELEX technology. After 14 rounds of screening, 12,639 sequences were obtained and divided into nine families. Three representative sequences were selected based on the number of sequence repeats and Gibbs binding free energy, and the aptamer SLex-Apt2 with 80 nt length (Kd = 23.01 nM) had the best affinity and relatively high specificity for targeting SLex. Then, a novel dual-recognition fluorescent biosensor for SLex-sensitive detection based on aptamer SLex-Apt2 bio-dots and 3-aminobenzoboric acid-modified MB was developed. This method can detect SLex as low as 32 µM and has a good linear response in the range 100 µM to 2 mM. It has the advantages of low preparation cost, good targeting, and avoiding the occurrence of false-positive and false-negative detection results, which makes the biosensor more valuable in biological detection and clinical diagnosis.

Viral aptamer screening and aptamer-based biosensors for virus detection: A review.

Virus-induced infectious diseases have a detrimental effect on public health and exert significant influence on the global economy. Therefore, the rapid and accurate detection of viruses is crucial for effectively preventing and diagnosing infections. Aptamer-based detection technologies have attracted researchers' attention as promising solutions. Aptamers, small single-stranded DNA or RNA screened via systematic evolution of ligands by exponential enrichment (SELEX), possess a high affinity towards their target molecules. Numerous aptamers targeting viral marker proteins or virions have been developed and widely employed in aptamer-based biosensors (aptasensor) for virus detection. This review introduces SELEX schemes for screening aptamers and discusses distinctive SELEX strategies designed explicitly for viral targets. Furthermore, recent advances in aptamer-based biosensing methods for detecting common viruses using different virus-specific aptamers are summarized. Finally, limitations and prospects associated with developing of aptamer-based biosensors are discussed.

Rapid Nuclease-Assisted Selection of High-Affinity Small-Molecule Aptamers.

Aptamers are nucleic acid bioreceptors that have been widely utilized for a variety of biosensing applications, including in vivo detection methods that would not be possible with antibody-based systems. However, it remains challenging to generate high-quality aptamers for small molecule targets, particularly for use under physiological conditions. We present a highly effective aptamer selection technology for small-molecule targets that utilizes the nuclease EcoRI to remove nonspecific or weakly binding sequences in solution phase, rapidly enriching high-affinity target binders within just a few rounds of selection. As proof-of-concept, we used our nuclease-assisted SELEX (NA-SELEX) method to isolate aptamers for a synthetic cannabinoid, AB-FUBINACA. Within five rounds, we identified two highly specific aptamers that exhibit nanomolar affinity at physiological temperature. We also demonstrate the robustness and reproducibility of NA-SELEX by performing the same selection experiment with fresh reagents and libraries, obtaining the same two aptamers as well as two other high-quality aptamer candidates. Finally, we compare NA-SELEX against a conventional library-immobilized SELEX screen for AB-FUBINACA using the same screening conditions, identifying aptamers with 25-100-fold weaker affinity after 11 rounds of selection. NA-SELEX therefore could be an effective selection method for the isolation of high-quality aptamers for small-molecule targets.

Isolation of novel fluorogenic RNA aptamers via in vitro compartmentalization using microbead-display libraries.

Fluorogenic RNA aptamers, which specifically bind to fluorogens and dramatically enhance their fluorescence, are valuable for imaging and detecting RNAs and metabolites in living cells. Most fluorogenic RNA aptamers have been identified and engineered through iterative rounds of in vitro selection based on their binding to target fluorogens. While such selection is an efficient approach for generating RNA aptamers, it is less efficient for isolating fluorogenic aptamers because it does not directly screen for fluorogenic properties. In this study, we combined a fluorescence-based in vitro selection technique using water-in-oil microdroplets with an affinity-based selection technique to obtain fluorogenic RNA aptamers. This approach allowed us to identify novel fluorogenic aptamers for a biotin-modified thiazole orange derivative. Our results demonstrate that our approach can expand the diversity of fluorogenic RNA aptamers, thus leading to new applications for the imaging and detection of biomolecules.

A Branched SELEX Approach Identifies RNA Aptamers That Bind Distinct HIV-1 Capsid Structural Components.

The HIV-1 capsid protein (CA) assumes distinct structural forms during replication, each presenting unique, solvent-accessible surfaces that facilitate multifaceted functions and host factor interactions. However, functional contributions of individual CA structures remain unclear, as evaluation of CA presents several technical challenges. To address this knowledge gap, we identified CA-targeting aptamers with different structural specificities, which emerged through a branched SELEX approach using an aptamer library previously selected to bind the CA hexamer lattice. Subsets were either highly specific for the CA lattice or bound both the CA lattice and CA hexamer. We then evaluated four representatives to reveal aptamer regions required for binding, highlighting interesting structural features and challenges in aptamer structure determination. Further, we demonstrate binding to biologically relevant CA structural forms and aptamer-mediated affinity purification of CA from cell lysates without virus or host modification, supporting the development of structural form-specific aptamers as exciting new tools for the study of CA.

The non-negligible non-specific adsorption of oligonucleotides in target-immobilized Mag-SELEX.

Target-immobilized magnetic beads-based Systematic Evolution of Ligands by Exponential Enrichment (target-immobilized Mag-SELEX) has emerged as a powerful tool for aptamer selection owing to its convenience, efficiency, and versatility. However, in this study we systematically investigated non-specific adsorption in target-immobilized Mag-SELEX and found that the non-specific adsorption of the oligonucleotides to target-labeled magnetic beads was comparable to that of the screening libraries, indicating a substantial portion of captured sequences likely stem from non-specific adsorption. Longer nucleic acid sequences (80 nt and above, such as polyA80 and yeast tRNA) were found to attenuate this non-specific adsorption, with more complex higher-order structures demonstrating greater efficacy, while dNTP and short sequences such as primer sequences (20 nt), polyT(59), or polyA(59), did not possess this capability. Various evidence suggested that hydrophobic interactions and other weak interactions may be the primary underlying cause of non-specific adsorption. Additionally, surface modification of magnetic beads with polar molecule polyethylene glycol (PEG) also yielded a significant reduction in non-specific adsorption. In conclusion, our research underscores the critical importance of closely monitoring non-specific adsorption in target-immobilized Mag-SELEX.

Aptamer and Electrochemical Aptasensor towards Selenate Ions (SeO42-).

Selenium is an essential inorganic compound in human and animal nutrition, involved in the proper functioning of the body. As a micronutrient, it actively contributes to the regulation of various metabolic activities, i.e., thyroid hormone, and protection against oxidative stress. However, Se exhibits a narrow concentration window between having a positive effect and exerting a toxic effect. In higher doses, it negatively affects living organisms and causes DNA damage through the formation of free radicals. Increased reactivity of Se anions can also disrupt the integrity and function of DNA-repairing proteins. As the permissible concentration of Se in drinking water is 10 µg/L, it is vital to develop sensitive and robust methods of Se detection in aqueous samples. In this study, for the first time, we proposed a selective aptamer for selenate ion detection, chosen following the SELEX process, and its application in the construction of an electrochemical aptasensor towards SeO42- ions. Measurement conditions such as the used redox marker and pH value of the measurement solution were chosen. The proposed aptasensor is characterized by good selectivity and an LOD of 1 nM. Conditions for biosensor regeneration and storage were also investigated in this research.

Therapeutic Applications of Aptamers.

Affinity reagents, or target-binding molecules, are quite versatile and are major workhorses in molecular biology and medicine. Antibodies are the most famous and frequently used type and they have been used for a wide range of applications, including laboratory techniques, diagnostics, and therapeutics. However, antibodies are not the only available affinity reagents and they do have significant drawbacks, including laborious and costly production. Aptamers are one potential alternative that have a variety of unique advantages. They are single stranded DNA or RNA molecules that can be selected for binding to many targets including proteins, carbohydrates, and small molecules-for which antibodies typically have low affinity. There are also a variety of cost-effective methods for producing and modifying nucleic acids in vitro without cells, whereas antibodies typically require cells or even whole animals. While there are also significant drawbacks to using aptamers in therapeutic applications, including low in vivo stability, aptamers have had success in clinical trials for treating a variety of diseases and two aptamer-based drugs have gained FDA approval. Aptamer development is still ongoing, which could lead to additional applications of aptamer therapeutics, including antitoxins, and combinatorial approaches with nanoparticles and other nucleic acid therapeutics that could improve efficacy.

Cell-SELEX for aptamer discovery and its utilization in constructing electrochemical biosensor for rapid and highly sensitive detection of Legionella pneumophila serogroup 1.

This study introduces an innovative electrochemical aptasensor designed for the highly sensitive and rapid detection of Legionella pneumophila serogroup 1 (L. pneumophila SG1), a particularly virulent strain associated with Legionellosis. Employing a rigorous selection process utilizing cell-based systematic evolution of ligands by exponential enrichment (cell-SELEX), we identified new high-affinity aptamers specifically tailored for L. pneumophila SG1. The selection process encompassed ten rounds of cell-SELEX cycles with live L. pneumophila, including multiple counter-selection steps against the closely related Legionella sub-species. The dissociation constant (Kd) of the highest affinity sequence to L. pneumophila SG1 was measured at 14.2 nM, representing a ten-fold increase in affinity in comparison with the previously reported aptamers. For the development of electrochemical aptasensor, a gold electrode was modified with the selected aptamer through the formation of self-assembled monolayers (SAMs). The newly developed aptasensor exhibited exceptional sensitivity, and specificity in detecting and differentiating various Legionella sp., with a detection limit of 5 colony forming units (CFU)/mL and an insignificant/negligible cross-reactivity with closely related sub-species. Furthermore, the aptasensor effectively detected L. pneumophila SG1 in spiked water samples, demonstrating an appreciable recovery percentage. This study shows the potential of our aptamer-based electrochemical biosensor as a promising approach for detecting L. pneumophila SG1 in diverse environments.

Screening and identification of DNA nucleic acid aptamers against F1 protein of Yersinia pestis using SELEX method.

BACKGROUND: Yersinia pestis is a bacterium that causes the disease plague. It has caused the deaths of many people throughout history. The bacterium possesses several virulence factors (pPla, pFra, and PYV). PFra plasmid encodes fraction 1 (F1) capsular antigen. F1 protein protects the bacterium against host immune cells through phagocytosis process. This protein is specific for Y. pestis. Many diagnostic techniques are based on molecular and serological detection and quantification of F1 protein in different food and clinical samples. Aptamers are small nucleic acid sequences that can act as specific ligands for many targets.This study, aimed to isolate the high-affinity ssDNA aptamers against F1 protein. METHODS AND RESULTS: In this study, SELEX was used as the main strategy in screening aptamers. Moreover, enzyme-linked aptamer sorbent assay (ELASA) and surface plasmon resonance (SPR) were used to determine the affinity and specificity of obtained aptamers to F1 protein. The analysis showed that among the obtained aptamers, the three aptamers of Yer 21, Yer 24, and Yer 25 were selected with a KD value of 1.344E - 7, 2.004E - 8, and 1.68E - 8 M, respectively. The limit of detection (LoD) was found to be 0.05, 0.076, and 0.033 µg/ml for Yer 21, Yer 24, and Yer 25, respectively. CONCLUSION: This study demonstrated that the synthesized aptamers could serve as effective tools for detecting and analyzing the F1 protein, indicating their potential value in future diagnostic applications.

Development of DNA aptamers targeting B7H3 by hybrid-SELEX: an alternative to antibodies for immuno-assays.

Antibodies have been extensively used in numerous applications within proteomics-based technologies, requiring high sensitivity, specificity, a broad dynamic range for detection, and precise, reproducible quantification. Seeking alternatives to antibodies due to several inherent limitations of antibodies is an area of active research of tremendous importance. Recently, aptamers have been receiving increasing attention, because they not only have all of the advantages of antibodies, but also have unique advantages, such as thermal stability, low cost, and unlimited applications. Aptamers are gaining importance in immunological studies and can potentially replace antibodies in immunoassays. B7H3, an immunoregulatory protein belonging to the B7 family, is an attractive and promising target due to its overexpression in several tumor tissues while exhibiting limited expression in normal tissues. This study employed hybrid-SELEX with next-generation sequencing to select ssDNA aptamers specifically binding to the B7H3 protein. These aptamers demonstrated versatility across various assays, including flow cytometry, dot-blot, and immunohistochemistry. Effective performance in sandwich dot-blot assays and western blot analysis suggests their potential for diagnostic applications and demonstrates their adaptability and cost-effectiveness in diverse protein detection techniques.