Textile effluent treatment by reductive process using commercial steel wool followed by oxidative process.

Textile industries stand out as one of the main polluters of water resources, generating large amounts of liquid effluents with variable composition and intense coloration. The objective of this work is the integration of the reductive process using commercial steel wool, combined with oxidative processes, in the treatment of textile effluent. The effect of the variables of the reductive process were studied using a 32 factorial design. After 30 minutes, the reductive process allowed a reduction of 68% COD, 46% TOC, 62% true color and 72% of total phenols, but showed an increase in color apparent and turbidity, due to the iron species formed by the oxidation of steel wool during the process. With the combined process using sunlight, the reduction was 73% COD, 50% TOC, 97% phenols, 93% true color and 48% apparent color. With artificial light, the reduction was 94% COD, 63% TOC, 95% phenols, 98% true color and 65% apparent color. The evaluation of the acute toxicity against Daphnia magna indicated that after the proposed treatments, the effluent did not present toxicity or the toxicity was reduced. It is concluded that the combined process can be considered an efficient alternative for the treatment of textile effluent.

Advancing sustainability in the steel industry: the key role of the triple helix sectors.

The steel industry, crucial to the global economy, grapples with critical sustainable challenges, including high energy consumption, greenhouse gas emissions, and non-renewable resource utilization, making sustainability imperative for upholding its economic role without compromising the planet or societal well-being. This study proposes a framework aimed at advancing sustainability in the steel industry through the articulation of the triple helix sectors (university, industry, and government). Based on the integrative review scientific method, systematic selection, interpretation, and synthesis of information from various sources were carried out to map a technical-scientific scenario of sustainability in the steel industry. This scenario informed benchmarking which, in light of the scientific theory and the authors' expertise, enabled the proposition of customized actions aimed at the triple helix actors. The main theoretical-scientific contribution lies in deepening and expanding the knowledge that connects sustainability to the steel industry, thus reinforcing the basis for future research and empirical studies. As for the managerial-applied contribution, this work can guide universities in developing sustainable projects and establishing industrial partnerships; steel companies benefit from the best practices and technologies, while also achieving regulatory compliance; and governments can promote public policies that boost sustainability in the steel sector.

Effect of acute exposure to settleable atmospheric particulate matter emitted by the steel industry on hematology and innate immunity of fat snook (Centropomus parallelus).

The steel industry is a significant worldwide source of atmospheric particulate matter (PM). Part of PM may settle (SePM) and deposit metal/metalloid and metallic nanoparticles in aquatic ecosystems. However, such an air-to-water cross-contamination is not observed by most monitoring agencies. The region of Vitoria City is the main location of iron processing for exports in Brazil, and it has rivers, estuaries, and coastal areas affected by SePM. We have evaluated the effects of SePM on a local representative fish species, the fat snook, Centropomus parallelus. After acclimation, 48 fishes (61.67 ± 27.83 g) were individually exposed for 96 h to diverse levels of SePM (0.0, 0.01, 0.1 and 1 g/L-1). The presence of metals in the blood and several blood biomarkers were analyzed to evaluate the impact of SePM on stress signaling, blood oxygen transport capacity, and innate immune activity. Metal bioaccumulation was measured from blood in two separately analyzed compartments: intracellular (erythrocytes plus white blood cells) and extracellular (plasma). The major metals present at all contamination levels in both compartments were Fe and Zn, followed by Al and Cu, plus traces of 'Emerging metals': Ba, Ce, La, Rb, Se, Sr, and Ti. Emerging metals refer to those that have recently been identified in water as contaminants, encompassing rare earth elements and critical technology elements, as documented in previous studies (See REEs and TCEs in Cobelo-García et al., 2015; Batley et al., 2022). Multivariate analysis revealed that SePM had strong, dose-dependent correlations with all biomarker groups and indicated that blood oxygen-carrying capacity had the highest contamination responsiveness. Metal contamination also increased cortisol and blood glucose levels, attesting to increased stress signaling, and had a negative effect on innate immune activity. Knowledge of the risks related to SePM contamination remains rudimentary. However, the fact that there was metal bioaccumulation, causing impairment of fundamental physiological and cellular processes in this ecologically relevant fish species, consumed by the local human population, highlights the pressing need for further monitoring and eventual control of SePM contamination.

Using native plants to evaluate urban metal pollution and appoint emission sources in the Brazilian Steel Valley region.

In southeastern Brazil, the city of Ipatinga is inserted in the Steel Valley Metropolitan Region, which hosts the largest industrial complex for flat-steel production in Latin America, while also having one of the largest vehicle fleets in the entire country. Since potentially toxic elements (PTEs) are not emitted solely by industries, yet also by vehicular activity, the predominant emission source can be determined by evaluating the ratio between different elements, which are called technogenic tracers. We performed a biomonitoring assay using two tropical legumes, Paubrasilia echinata and Libidibia ferrea var. leiostachya, aiming to assess chemical markers for the origin of emissions in the region, distinguishing between different anthropogenic sources. Plants were exposed for 90 days in four urban sites and in a neighboring park which served as reference. After the experimental period, plants were evaluated for trace-metal accumulation. L. ferrea var. leiostachya retained lower amounts of metals associated with vehicular and industrial emission. The opposite was found with P. echinata, a species which should be recommended for biomonitoring of air pollution as a bioaccumulator. Plants of P. echinata were enriched with Fe, Al, Ni, Cr, and Ba, whereas plants of L. ferrea var. leiostachya were enriched with Fe, Cu, and Co. In both species, Fe was the element with which plants were enriched the most. Plants showed highest iron enrichment at Bom Retiro, the site downwind to the steel industry, which has shown to be the main particle emission source in the region.

Biochemical and microbiological characterization of a thermotolerant bacterial consortium involved in the corrosion of Aluminum Alloy 7075.

Microorganisms can play a significant role in material corrosion, with bacterial biofilms as major participants in microbially influenced corrosion (MIC). The exact mechanisms by which this takes place are poorly understood, resulting in a scarcity of information regarding MIC detection and prevention. In this work, a consortium of moderately thermophilic bacteria isolated from a biofilm growing over aluminum alloy 7075 was characterized. Its effect over the alloy was evaluated on a 40-day period using Electron Microscopy, demonstrating acceleration of corrosion in comparison to the abiotic control. The bacterial consortium was biochemically and microbiologically characterized as an attempt to elucidate factors contributing to corrosion. Molecular analysis revealed that the consortium consisted mainly of members of the Bacillus genus, with lower abundance of other genera such as Thermoanaerobacterium, Anoxybacillus and Paenibacillus. The EPS polysaccharide presented mainly mannose, galactose, rhamnose and ribose. Our observations suggest that the acidification of the culture media resulting from bacterial metabolism acted as the main contributor to corrosion, hinting at an unspecific mechanism. The consortium was not sulfate-reducing, but it was found to produce hydrogen, which could also be a compounding factor for corrosion.

Inhibitor activity of Lactiplantibacillus plantarum LP5 on thermotolerant campylobacter with different biofilm-forming capacities.

AIMS: To evaluate the biofilm-forming capacity of thermotolerant Campylobacter (TC) strains from poultry production and to analyse the inhibitory capacity of Lactiplantibacillus plantarum LP5 against TC on different materials. METHODS AND RESULTS: Biofilm-forming capacity by Campylobacter jejuni and Campylobacter coli was analysed by cell adhesion in polystyrene plates. TC were classified as non-biofilm-forming (NBF, 1.3%), weak biofilm-forming (WBF, 68.4%), moderate biofilm-forming (MBF, 27.6%), and strong biofilm-forming (SBF, 2.7%). The inhibitory capacity of L. plantarum LP5 against TC was tested on stainless-steel, nylon, aluminium, and glass disks (treated group) and compared with biofilm-forming TC (control group). Lactiplantibacillus plantarum LP5 was inoculated, and then TC. Biofilm was removed in both experimental groups and TC and LP5 bacterial counts were performed. The L. plantarum LP5 presence reduced the formation of TC biofilm (P < 0.001). The material type and strain category influenced biofilm formation, with stainless-steel and the SBF strain being the material and TC having the highest adhesion (P < 0.001). Lactiplantibacillus plantarum LP5 formed a similar biofilm on all materials (P = 0.823). CONCLUSIONS: This trial showed very promising results; L. plantarum LP5 could be incorporated as a bio-protector of TC on different surfaces.

Econometric model of iron ore through principal component analysis and multiple linear regression.

Price of iron ore is affected by instabilities of microeconomic balance between supply and demand. Periods of equilibrium adjustment result in huge swings, growth or global recession. They also impact the viability of mineral enterprises and generate consequences to important global economic scenarios. This research aims to evaluate the market variables capable of influencing the price of iron ore through multivariate statistical techniques. Principal component analysis and multiple linear regression, booth multivariate statistical techniques were used. The studied variables were rate export of iron ore and concentrates from Brazil, steel production from China, steel production from Japan, production from Europe, steel production from the United States, steel production from India, steel price, coal price, China's Construction Gross Domestic Production, United States construction index, oil price and global oil production. First three components explained 89.12% of the variability of the data matrix. Multiple linear regression highlighted the significance of five variables. They are export iron ore from Brazil, steel production from China, price of coal, steel production from India and price of steel.

Synthesis of Ammonium-Based ILs with Different Lengths of Aliphatic Chains and Organic Halogen-Free Anions as Corrosion Inhibitors of API X52 Steel.

In the present work, synthesis and characterization of 15 ionic liquids (ILs) derived from quaternary ammonium and carboxylates were carried out in order to proceed to their evaluation as corrosion inhibitors (CIs) of API X52 steel in 0.5 M HCl. Potentiodynamic tests confirmed the inhibition efficiency (IE) as a function of the chemical configuration of the anion and cation. It was observed that the presence of two carboxylic groups in long linear aliphatic chains reduced the IE, whereas in shorter chains it was increased. Tafel-polarization results revealed the ILs as mixed-type CIs and that the IE was directly proportional to the CI concentration. The compounds with the best IE were 2-amine-benzoate of N,N,N-trimethyl-hexadecan-1-ammonium ([THDA+][-AA]), 3-carboxybut-3-enoate of N,N,N-trimethyl-hexadecan-1-ammonium ([THDA+][-AI]), and dodecanoate of N,N,N-trimethyl-hexadecan-1-ammonium ([THDA+][-AD]) within the 56-84% interval. Furthermore, it was found that the ILs obeyed the Langmuir adsorption isotherm model and inhibited the corrosion of steel through a physicochemical process. Finally, the surface analysis by scanning electron microscopy (SEM) confirmed less steel damage in the presence of CI due to the inhibitor-metal interaction.

Temperature Effect on the Corrosion Inhibition of Carbon Steel by Polymeric Ionic Liquids in Acid Medium.

In the present research work, the temperature effect on the corrosion inhibition process of API 5L X60 steel in 1 M H2SO4 by employing three vinylimidazolium poly(ionic liquid)s (PILs) was studied by means of electrochemical techniques, surface analysis and computational simulation. The results revealed that the maximal inhibition efficiency (75%) was achieved by Poly[VIMC4][Im] at 308 K and 175 ppm. The PILs showed Ecorr displacements with respect to the blank from -14 mV to -31 mV, which revealed the behavior of mixed-type corrosion inhibitors (CIs). The steel micrographs, in the presence and absence of PILs, showed less surface damage in the presence of PILs, thus confirming their inhibiting effect. The computational studies of the molecular orbitals and molecular electrostatic potential of the monomers suggested that the formation of a protecting film could be mainly due to the nitrogen and oxygen heteroatoms present in each structure.

Influence of Environmental Exposure to Steel Waste on Endocrine Dysregulation and PER3 Gene Polymorphisms.

OBJECTIVE: To evaluate the association between environmental exposure to the following chemical substances: cadmium (Cd), lead (Pb), nickel (Ni), manganese (Mn), benzene (BZN), and toluene (TLN), and Period Circadian Regulator 3 (PER3) gene variable number of tandem repeats (VNTR) polymorphisms, according to chronotype in a population living in a steel residue-contaminated area. METHODS: This assessment comprises a study conducted from 2017 to 2019 with 159 participants who completed health, work, and Pittsburgh sleep scale questionnaires. Cd, Pb, Ni, Mn, BZN, and TLN concentrations in blood and urine were determined by Graphite Furnace Atomic Absorption Spectrometry (GFAAS) and Headspace Gas Chromatography (GC), and genotyping was carried out using Polymerase Chain Reaction (PCR). RESULTS: A total of 47% of the participants were afternoon chronotype, 42% were indifferent, and 11% were morning chronotype. Insomnia and excessive sleepiness were associated with the indifferent chronotype, while higher urinary manganese levels were associated with the morning chronotype (Kruskal-Wallis chi-square = 9.16; p < 0.01). In turn, the evening chronotype was associated with poorer sleep quality, higher lead levels in blood, and BZN and TLN levels in urine (χ2 = 11.20; p < 0.01) in non-occupationally exposed individuals (χ2 = 6.98; p < 0.01) as well as the highest BZN (χ2 = 9.66; p < 0.01) and TLN (χ2 = 5.71; p < 0.01) levels detected in residents from the influence zone 2 (far from the slag). CONCLUSION: Mn, Pb, benzene, and toluene contaminants may have influenced the different chronotypes found in the steel residue-exposed population.

Multi-Objective Optimization Applied to the Design of Sustainable Pedestrian Bridges.

The demand for more sustainable structures has been shown as a growing tendency, and engineers can use optimization techniques to aid in the design and sizing stage, achieving solutions that minimize its cost and environmental and social impacts. In pedestrian bridges, which are subjected to human-induced vibrations, it is also important to ensure the users' comfort, besides the security verifications. In this context, the objective of this paper is to perform a multi-objective optimization of a steel-concrete composite pedestrian bridge, minimizing cost, carbon dioxide emissions, and vertical acceleration caused by human walking. For this, the Multi-Objective Harmony Search (MOHS) was applied to obtain non-dominated solutions and compose a Pareto Front. Two scenarios were considered with different unit emissions obtained from a life cycle assessment in the literature. Results show that by increasing 15% the structure cost, the vertical acceleration is reduced from 2.5 to 1.0 m/s2. For both scenarios, the optimal ratio for the web height and total span (Le) lies between Le/20 and Le/16. The web height, the concrete strength, and the slab thickness were the design variables with more influence on the value of the vertical acceleration. The Pareto-optimal solutions were considerably sensitive to the parameters varied in each scenario, changing concrete consumption and dimensions of the welded steel I-beam, evidencing the importance of carrying out a sensitivity analysis in optimization problems.

Does Elective Sternal Plating Combined with Steel Wire Reduce Sternal Complication Rates in Patients with Obesity?

INTRODUCTION: In this study, sternal complication rates of sternal closures with steel wire or steel wire combined with titanium plate in patients with obesity that underwent cardiac surgery were investigated. METHODS: The data of 316 patients that underwent cardiac surgery between May 2018 and October 2021 were analyzed retrospectively; 124 patients withbody mass index (BMI) ≥ 30 kg/m2 were divided into group I, patients whose sternotomy was performed with steel wires, and group II, patients whose sternotomy was performed with steel wire combined with titanium plates. RESULTS: A total of 124 patients with BMI ≥ 30 kg/m2 were divided into group I (n=88 [70.9%]) and group II (n=36 [29.1%]). The rate of male patients was found to be significantly higher in group I, whereas the rate of female patients was significantly higher in group II (P<0.001). BMI values were found to be low in group I and high in group II (P<0.001). The distribution of complications was different in the BMI ≥ 35.00-39.99 kg/m2 and ≥ 40 kg/m2 groups (P=0.003). Development of complications was found to be higher in patients with BMI ≥ 40 kg/m2. Sternal dehiscence was observed in two patients in group I, while no dehiscence was observed in group II. CONCLUSION: The lower incidence of complications and the absence of non-infectious sternal complications and sternal dehiscence in patients with BMI ≥ 35 kg/m2 that underwent steel wire combined titanium plate sternal closure strengthened the idea that plate-supported sternal closure can prevent sternal complications in high-risk patients.

Experimental and Theoretical Studies on Acid Corrosion Inhibition of API 5L X70 Steel with Novel 1-N-α-d-Glucopyranosyl-1H-1,2,3-Triazole Xanthines.

A series of novel 1-N-α-d-glucopyranosyl-1H-1,2,3-triazole xanthines was synthesized from azido sugars (glucose, galactose, and lactose) and propargyl xanthines (theophylline and theobromine) using a typical copper (I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition. The corrosion inhibition activities of these new carbohydrate-xanthine compounds were evaluated by studying the corrosion of API 5 L X70 steel in a 1 M HCl medium. The results showed that, at 10 ppm, a 90% inhibition efficiency was reached by electrochemical impedance spectroscopy. The inhibitory efficiency of these molecules is explained by means of quantum chemical calculations of the protonated species with the solvent effect, which seems to better represent the actual situation of the experimental conditions. Some quantum chemical parameters were analyzed to characterize the inhibition performance of the tested molecules.

The environmental monitoring of air pollution in the Santa Cruz industrial district of Rio de Janeiro using a plant fertility model.

In 2010, a steel company was established in Santa Cruz, Rio de Janeiro. In 2012, silver rain raised concerns about human and environmental impacts. In 2013, the steel company signed an Adjustment of Conduct Term (ACT). To evaluate air pollution in the vicinity of the steel company based on a plant fertility assay before and after ACT implementation. A pollen abortion assay was implemented using flower buds of Bauhinia forficata in 2013 and Delonix regia in 2015. Sites over 5 km from the steel company, highways, and tunnels were classified as unexposed; sites 5 km from highway/tunnel were classified as exposed to other sources; and sites 5 km from the steel company were classified as exposed. Random plant collection occurred during the dry and rainy seasons (10 buds/site and 300 cells/slide). Aborted grains were analyzed using a 400-fold magnification microscope. Statistical analyses were considered significant at the 5% level. In 2013 were collected flower buds in 27 sites (2 unexposed, 18 highway/tunnel-exposed, and 7 steel company-exposed); and 34 sites in 2015 (14 unexposed, 18highway/tunnel-exposed, and 2 steel company-exposed). In both years, the mean pollen abortion was significantly higher in the dry season for sites exposed to highway/tunnel (p < 0.001) and the steel company (p = 0.005). In 2013, the mean pollen abortion was significantly higher in sites exposed to highway/tunnel compared to unexposed sites (p = 0.004) and in sites exposed to the steel company compared to sites exposed to highway/tunnel (p = 0.034). In 2015, compared to unexposed sites, the mean pollen abortion was significantly higher in sites exposed to highway/tunnel (p = 0.014) and the steel company (p < 0.001). Overall, compared to unexposed sites, the mean pollen abortion was 5.79-fold higher in sites exposed to the steel company and 4.08-fold higher in sites exposed to highway/tunnel. Compared to unexposed plants, greater air pollution effects occurred in plants exposed to the steel company before (2013) and after (2015)ACT implementation.

Investigation of carbon steel corrosion by oilfield nitrate- and sulfate-reducing prokaryotes consortia in a hypersaline environment.

Microbiologically influenced corrosion (MIC) behavior of the AISI 1020 carbon steel caused by consortia of nitrate-reducing prokaryotes (NRP) and sulfate-reducing prokaryotes (SRP) was investigated separately in hypersaline seawater conditions. Microbiological analysis, surface images, characterization of corrosion products, weight loss, and electrochemical measurements were employed to monitor the corrosion process for 10 days at 40 °C. Compared to abiotic corrosion (control), the extent of corrosion was more aggravated in the conditions with microbial consortia. It corroborates the critical role of microbial activity in corrosion processes in natural and industrial environments since microorganisms are widely spread. Corrosion rates obtained from Tafel extrapolation were statically equal for both microbial consortia (0.093 ± 0.009 mm.y-1); however, the maximum pit depth on the steel surface subjected to NRP-MIC was about 25% deeper (48.5 µm) than that caused by SRP-MIC (32.6 µm). In contrast, SRP activity almost doubled the number of pits on the steel surface (2.7 × 104 ± 4.1 × 103 pits.m-2), resulting in more weight loss than NRP activity. In addition, SRP cells formed nanowires to support direct electron uptake from steel oxidation. This research contributes to the understanding of steel corrosion mechanisms in hypersaline environments with the prevalence of NRP or SRP, as oil reservoirs undergo nitrate injection treatments.

Chronic Cadmium Exposure and Genetic Polymorphisms of MMP-2 and MMP-9 in a Population Exposed to Steel Slag in the State of Rio de Janeiro, Brazil: A Cross-Sectional Study.

Genetic polymorphisms in the matrix metalloproteinases (MMPs) family genes may be associated with cadmium (Cd) levels and its adverse effects. This study investigated the impact of MMP-2 and MMP-9 polymorphisms on Cd levels in 238 residents of a condominium in Rio de Janeiro, Brazil, built over an industrial steel slag waste. Polymorphisms were genotyped using TaqMan validated assays, and the Cd levels were measured in blood (BCd) and urine (UCd) samples by atomic absorption spectrometry. Associations were evaluated by linear correlation coefficients and multiple logistic regression, using odds ratios (OR) and 95% confidence intervals (CI). Mean age was 50 ± 15 years; 58% were female, 69% non-smokers. Mean concentrations for BCd and UCd were 0.70 ± 0.2 µg L-1 and 0.56 ± 0.55 µg L-1, respectively. Smoking status was associated with BCd ≥ 0.70 µg L-1 (OR = 2.9; 95% CI = 1.6-5.9). MMP-9 rs17576 A > G was associated with BCd ≥ 0.70 µg L-1 (OR = 2.11; 95% CI = 1.10-4.05) and UCd ≥ 0.56 µg L-1 (OR = 3.38; 95% CI = 1.82-7.65). Knowing possible individual predisposing factors is essential to understand Cd toxicity, and to improve the monitoring of high-risk populations.

Phytoremediation of toxic heavy metals in polluted soils and water of Dargai District Malakand Khyber Pakhtunkhwa, Pakistan.

The contamination of natural resources with heavy metals released from steel mills is the primary cause of soil and water pollution in the Dargai Malakand, located on the northern side of Pakistan. Therefore, the present study was aimed to determine the level of heavy metals in soil and water samples of this area. The wild plant growing (nine native plants: Pteris vittata, Populus nigra, Eucalyptus camaldulensis, Persicaria maculosa, Arundo donax, Xanthium strumarium, Verbascum thapsus, Ricinus communis and Parthenium hysterophorus) there were then tested for their phytoremediation capabilities which is an environmentally friendly, generally utilized, and low-cost approach to eliminate heavy metals from polluted soils and water. Soil, water, and effluent samples were taken from the contaminated sites of seven steel mills in Dargai District Malakand and subjected to heavy metals analysis. Based on bioconcentration factor (BCF) and translocation factor (TF) calculated, The highest BCF for zinc was recorded for Pteris vittata roots (3.93), while the lowest value was observed for Verbascum thapsus leaves (0.306). Pteris vittata root showed the highest BCF for iron (1.618), while Ricinus communis leaves showed the lowest (0.023). The highest BCF value for chromium was highest for Populus nigra roots (0.717), while the lowest value was recorded for Persicaria maculosa leaves (0.031). For the selected metals; Fe, Zn and Cr the highest TF were recorded for Pteris vittata (0.988), Verbascum thapsus (0.944) and Xanthium strumairum (0.968) respectively. Therefore, it is recommended that these plants should be grown near to steel mills to reclaim heavy metals from industrial effluent, polluted soil as well as from polluted water.

The impact of provisional intraradicular retainers cementation with temporary methacrylate-based resin in the bond strength of glass fiber posts to root dentin.

Chemical composition of temporary cements interferes in the bond strength and quality of the bond interface of glass fiber posts to root dentin. The aim of the present study was to evaluate the influence of different temporary cements on the bond strength of fiberglass posts and resin cement. Thirty-two maxillary central incisor roots were standardized at 15 mm length. The root canals were prepared with Reciproc R50 and filled with a R50 single cone and AH Plus. Ten mm of filling material was removed with a heated Schilder condenser, leaving 5 mm of apical filling material. The roots were randomly distributed into 4 groups (n = 8). In the control group, the root canal was prepared with a standard drill according to the post diameter (DC #1, FGM, Joinville, Brazil), irrigated with 5 mL of distilled water and immediately received the fiberglass post cemented with self-adhesive resin cement. For the other groups, cores were made with temporary intraradicular retainers cemented with different temporary cements: methacrylate-based resin (Bifix Temp - Voco), calcium hydroxide-based (Provicol - Voco) and zinc oxide-based - eugenol-free (Relyx Temp NE - 3M). After 7 days, mechanical removal of the temporary retainers, preparation, irrigation of the root canal and cementation of the fiberglass post were performed, following the same protocol that had been performed in the control group. The roots were sectioned to obtain 3 slices per root third. The most cervical section of each third was used for the push-out test and failure pattern analysis, while the most apical section was subjected to analysis of the adhesive interface by scanning electron microscopy (SEM). The BS data were compared between groups using the two-way ANOVA and Tukey post-test. The failure pattern results were expressed in percentage and compared between groups using the chi-square test and the material adaptation data at the bond interface were evaluated using the Kruskal-Wallis and Dwass-Steel-Critchlow-Fligner tests. The results showed higher BS in the cervical third, with a higher value in the control group (10.8 ± 0.94) and Bifix Temp group (9.78 ± 0.71), with no statistically significant difference between these groups (P > .05). The middle and apical thirds showed no statistically significant difference (P > .05). As regards the type of failure, a higher percentage of mixed adhesive failures was observed for all groups. Analysis of the adhesive interface by SEM showed that the temporary cement Bifix Temp showed greater adaptation at the bond interface. It was concluded that the methacrylate-based resin temporary cement showed the highest bond strength values and best adaptation to root dentin than the zinc oxide-based and calcium hydroxide-based temporary cements.

Sweet Corrosion Inhibition by CO2 Capture.

The most practical and economical way to combat the problems derived from CO2 corrosion (sweet corrosion) is the use of corrosion inhibitors of organic origin. Its main protection mechanism is based on its ability to adsorb on the metal surface, forming a barrier between the metal surface and the aggressive medium. However, despite its excellent performance, its inhibition efficiency can be compromised with the increase in temperature as well as the shear stresses. In this study, the use of an inorganic inhibitor is proposed that has not been considered as an inhibitor of sweet corrosion. The reported studies are based on using LaCl3 as a corrosion inhibitor. Its behavior was evaluated on 1018 carbon steel using electrochemical measurements, such as potentiodynamic polarization curves, open-circuit potential measurements, linear polarization resistance measurements, and electrochemical impedance. The results showed an inhibition efficiency of the sweet corrosion process greater than 95%, and that the inhibition mechanism was different from the classic corrosion process in CO2-free electrolytes. In this case, it was observed that the inhibitory capacity of the La3+ cations is based on a CO2-capture process and the precipitation of a barrier layer of lanthanum carbonate (La2(CO3)3).

Toward a Structural Health Monitoring Methodology for Concrete Structures under Dynamic Loads Using Embedded FBG Sensors and Strain Mapping Techniques.

A data-driven-based methodology for SHM in reinforced concrete structures using embedded fiber optic sensors and pattern recognition techniques is presented. A prototype of a reinforced concrete structure was built and instrumented in a novel fashion with FBGs bonded directly to the reinforcing steel bars, which, in turn, were embedded into the concrete structure. The structure was dynamically loaded using a shaker. Superficial positive damages were induced using bonded thin steel plates. Data for pristine and damaged states were acquired. Classifiers based on Mahalanobis' distance of the covariance data matrix were developed for both supervised and unsupervised pattern recognition with an accuracy of up to 98%. It was demonstrated that the proposed sensing scheme in conjunction with the developed supervised and unsupervised pattern recognition techniques allows the detection of slight stiffness changes promoted by damages, even when strains are very small and the changes of these associated with the damage occurrence may seem negligible.