Human manipulation strategy when changing object deformability and task properties.

Robotic literature widely addresses deformable object manipulation, but few studies analyzed human manipulation accounting for different levels of deformability and task properties. We asked participants to grasp and insert rigid and deformable objects into holes with varying tolerances and depths, and we analyzed the grasping behavior, the reaching velocity profile, and completion times. Results indicated that the more deformable the object is, the nearer the grasping point is to the extremity to be inserted. For insertions in the long hole, the selection of the grasping point is a trade-off between task accuracy and the number of re-grasps required to complete the insertion. The compliance of the deformable object facilitates the alignment between the object and the hole. The reaching velocity profile when increasing deformability recalls the one observed when task accuracy and precision decrease. Identifying human strategy allows the implementation of human-inspired high-level reasoning algorithms for robotic manipulation.

Limb-related sensory prediction errors and task-related performance errors facilitate human sensorimotor learning through separate mechanisms.

The unpredictable nature of our world can introduce a variety of errors in our actions, including sensory prediction errors (SPEs) and task performance errors (TPEs). SPEs arise when our existing internal models of limb-environment properties and interactions become miscalibrated due to changes in the environment, while TPEs occur when environmental perturbations hinder achievement of task goals. The precise mechanisms employed by the sensorimotor system to learn from such limb- and task-related errors and improve future performance are not comprehensively understood. To gain insight into these mechanisms, we performed a series of learning experiments wherein the location and size of a reach target were varied, the visual feedback of the motion was perturbed in different ways, and instructions were carefully manipulated. Our findings indicate that the mechanisms employed to compensate SPEs and TPEs are dissociable. Specifically, our results fail to support theories that suggest that TPEs trigger implicit refinement of reach plans or that their occurrence automatically modulates SPE-mediated learning. Rather, TPEs drive improved action selection, that is, the selection of verbally sensitive, volitional strategies that reduce future errors. Moreover, we find that exposure to SPEs is necessary and sufficient to trigger implicit recalibration. When SPE-mediated implicit learning and TPE-driven improved action selection combine, performance gains are larger. However, when actions are always successful and strategies are not employed, refinement in behavior is smaller. Flexibly weighting strategic action selection and implicit recalibration could thus be a way of controlling how much, and how quickly, we learn from errors.

Contributions of cortical neuron firing patterns, synaptic connectivity, and plasticity to task performance.

Neuronal responses during behavior are diverse, ranging from highly reliable 'classical' responses to irregular 'non-classically responsive' firing. While a continuum of response properties is observed across neural systems, little is known about the synaptic origins and contributions of diverse responses to network function, perception, and behavior. To capture the heterogeneous responses measured from auditory cortex of rodents performing a frequency recognition task, we use a novel task-performing spiking recurrent neural network incorporating spike-timing-dependent plasticity. Reliable and irregular units contribute differentially to task performance via output and recurrent connections, respectively. Excitatory plasticity shifts the response distribution while inhibition constrains its diversity. Together both improve task performance with full network engagement. The same local patterns of synaptic inputs predict spiking response properties of network units and auditory cortical neurons from in vivo whole-cell recordings during behavior. Thus, diverse neural responses contribute to network function and emerge from synaptic plasticity rules.

Influence of floor inclination on handle push and pull forces production of the upper limb.

Floor inclination can alter hand force production, and lower limb kinetics, affecting control operations, and threatening operator safety in various domains, such as aviation, naval, construction industry, or agriculture. This study investigates the effects of different floor inclinations, on handle push or pull force production. Participants performed maximal isometric contraction tasks requiring to exert a maximal voluntary force either by pulling or pushing a handle, at different floor inclinations from -30° to +30° about the transverse and longitudinal axes. Maximal hand force and Ground Reaction Forces about both feet were recorded. The results revealed non-equivalent variations in hand and feet responses as a function of inclination angle. Specifically, there was a significant reduction in handle push-pull force production, up to 70% (p < 0.001) for extreme inclinations, around both axes. This study provides critical data for design engineers, highlighting the challenge of production forces at steep angles.

A portable inflatable soft wearable robot to assist the shoulder during industrial work.

Repetitive overhead tasks during factory work can cause shoulder injuries resulting in impaired health and productivity loss. Soft wearable upper extremity robots have the potential to be effective injury prevention tools with minimal restrictions using soft materials and active controls. We present the design and evaluation of a portable inflatable shoulder wearable robot for assisting industrial workers during shoulder-elevated tasks. The robot is worn like a shirt with integrated textile pneumatic actuators, inertial measurement units, and a portable actuation unit. It can provide up to 6.6 newton-meters of torque to support the shoulder and cycle assistance on and off at six times per minute. From human participant evaluations during simulated industrial tasks, the robot reduced agonist muscle activities (anterior, middle, and posterior deltoids and biceps brachii) by up to 40% with slight changes in joint angles of less than 7% range of motion while not increasing antagonistic muscle activity (latissimus dorsi) in current sample size. Comparison of controller parameters further highlighted that higher assistance magnitude and earlier assistance timing resulted in statistically significant muscle activity reductions. During a task circuit with dynamic transitions among the tasks, the kinematics-based controller of the robot showed robustness to misinflations (96% true negative rate and 91% true positive rate), indicating minimal disturbances to the user when assistance was not required. A preliminary evaluation of a pressure modulation profile also highlighted a trade-off between user perception and hardware demands. Finally, five automotive factory workers used the robot in a pilot manufacturing area and provided feedback.

The effect of second-person self-talk on performance and motivation in Japanese individuals.

Talking to oneself using the second-person pronoun ["you" has been shown to enhance performance and autonomous motivation in English speakers. However, there is a lack of evidence on whether it can be replicated for speakers of other languages, such as Japanese, in which the grammatical subject is usually omitted in daily conversation. Based on self-determination theory, the present study examined the effects of second-person self-talk for a sample of Japanese individuals on task performance, intrinsic motivation, and three styles of extrinsically motivated regulations: identified, introjected, and external. We randomly assigned 411 undergraduate students to either an experimental group (second-person self-talk, first-person self-talk, and non-subject self-talk) or a control group. An anagram task was used to assess performance. No significant difference was found between the four groups in intrinsic motivation or performance. For extrinsic regulations, the results showed that first-person self-talk led to higher external regulation than non-subject self-talk and the control group. The possible reason for contradictory findings with our hypothesis and implications have been discussed.

Assessing the Relationship Between Digital Trail Making Test Performance and IT Task Performance: Empirical Study.

BACKGROUND: Cognitive functional ability affects the accessibility of IT and is thus something that should be controlled for in user experience (UX) research. However, many cognitive function assessment batteries are long and complex, making them impractical for use in conventional experimental time frames. Therefore, there is a need for a short and reliable cognitive assessment that has discriminant validity for cognitive functions needed for general IT tasks. One potential candidate is the Trail Making Test (TMT). OBJECTIVE: This study investigated the usefulness of a digital TMT as a cognitive profiling tool in IT-related UX research by assessing its predictive validity on general IT task performance and exploring its discriminant validity according to discrete cognitive functions required to perform the IT task. METHODS: A digital TMT (parts A and B) named Axon was administered to 27 healthy participants, followed by administration of 5 IT tasks in the form of CAPTCHAs (Completely Automated Public Turing tests to Tell Computers and Humans Apart). The discrete cognitive functions required to perform each CAPTCHA were rated by trained evaluators. To further explain and cross-validate our results, the original TMT and 2 psychological assessments of visuomotor and short-term memory function were administered. RESULTS: Axon A and B were administrable in less than 5 minutes, and overall performance was significantly predictive of general IT task performance (F5,19=6.352; P=.001; Λ=0.374). This result was driven by performance on Axon B (F5,19=3.382; P=.02; Λ=0.529), particularly for IT tasks involving the combination of executive processing with visual object and pattern recognition. Furthermore, Axon was cross-validated with the original TMT (Pcorr=.001 and Pcorr=.017 for A and B, respectively) and visuomotor and short-term memory tasks. CONCLUSIONS: The results demonstrate that variance in IT task performance among an age-homogenous neurotypical population can be related to intersubject variance in cognitive function as assessed by Axon. Although Axon's predictive validity seemed stronger for tasks involving the combination of executive function with visual object and pattern recognition, these cognitive functions are arguably relevant to the majority of IT interfaces. Considering its short administration time and remote implementability, the Axon digital TMT demonstrates the potential to be a useful cognitive profiling tool for IT-based UX research.

Factors Affecting the Situational Awareness of Armored Vehicle Occupants.

In the field of armored vehicles, up to 70% of accidents are associated with low levels of situational awareness among the occupants, highlighting the importance of situational awareness in improving task performance. In this study, we explored the mechanisms influencing situational awareness by simulating an armored vehicle driving platform with 14 levels of experimentation in terms of five factors: experience, expectations, attention, the cueing channel, and automation. The experimental data included SART and SAGAT questionnaire scores, eye movement indicators, and electrocardiographic and electrodermal signals. Data processing and analysis revealed the following conclusions: (1) Experienced operators have higher levels of situational awareness. (2) Operators with certain expectations have lower levels of situational awareness. (3) Situational awareness levels are negatively correlated with information importance affiliations and the frequency of anomalous information in non-primary tasks. (4) Dual-channel cues lead to higher levels of situational awareness than single-channel cues. (5) Operators' situational awareness is lower at high automation levels.

Expiratory Threshold Loading and Attentional Performance.

INTRODUCTION: While there are numerous factors that may affect pilot attentional performance, we hypothesize that an increased expiratory work of breathing experienced by fighter pilots may impose a "distraction stimulus" by creating an increased expiratory effort sensation. Therefore, the purpose of this study was to determine the extent to which increasing expiratory pressure time product or expiratory effort sensation impacts attentional performance.METHODS: Data was collected on 10 healthy participants (age: 29 ± 6 yr). Participants completed six repetitions of a modified Masked Conjunctive Continuous Performance Task protocol while breathing against four different expiratory threshold loads. Repeated measures analysis of variances and generalized additive mixed effects models were used to investigate the effects of expiratory threshold load conditions on expiratory pressure time product, expiratory effort sensation, and the influence of altered end tidal gases on Masked Conjunctive Continuous Performance Task scores.RESULTS: The overall median hit reaction times were significantly longer as the expiratory threshold loads increased. Specific shape-conjunctive and non-conjunctive median hit reaction times were longer with increased expiratory effort sensation. Additionally, increased expiratory effort sensation did not significantly change commission error rates, but did significantly increase omission error rates.DISCUSSION: The findings of our work suggest that both progressively greater expiratory threshold loads during spontaneous breathing and expiratory effort sensation may impair subjects' attentional performance due to longer reaction times and increased stimuli recognition error rates.Kelley EF, Cross TJ, Johnson BD. Expiratory threshold loading and attentional performance. Aerosp Med Hum Perform. 2024; 95(7):367-374.

Eye-controlled endoscopy - a benchtop trial of a novel robotic steering platform - iGAZE2.

The endoscopic control system has remained similar in design for many decades The remit of advanced therapeutic endoscopy continues to expand requiring precision control and high cognitive workloads. Robotic systems are emerging, but all still require bimanual control and expensive and large new systems. Eye tracking is an exciting area that can be used as an endoscope control system. This is a study to establish the feasibility of an eye-controlled endoscope and compare its performance and cognitive demand to use of a conventional endoscope. An eye gaze-control system consisting of eye-tracking glasses, customised software and a small motor unit was built and attached to a conventional endoscope. Twelve non-endoscopists used both the eye gaze system and a conventional endoscope to complete a benchtop task in a simulated oesophagus and stomach. Completion of tasks was timed. Subjective feedback was collected from each participant on task load using the NASA Task Load Index. Participants were significantly quicker completing the task using iGAZE2 vs a conventional endoscope (65.02 ± 16.34s vs 104.21 ± 51.31s, p = 0.013) Participants were also significantly quicker completing retroflexion using iGAZE2 vs a conventional endoscope (8.48 ± 3.08 vs 11.38 ± 5.36s, p = 0.036). Participants reported a significantly lower workload (raw NASA-TLX score) when using iGAZE2 vs the conventional endoscope (152.1 ± 63.4 vs 319.6 ± 81.6, p = 0.0001) (Fig. 7). Users found iGAZE2 to have a significantly lower temporal demand, mental demand, effort, mental demand, physical demand, and frustration level. The eye gaze system is an exciting, small, and retrofittable system to any endoscope. The system shows exciting potential as a novel endoscopic control system with a significantly lower workload and better performance in novices suggesting a more intuitive control system.

Lights, Sirens, and Load: Anticipatory emergency medical treatment planning causes cognitive load during emergency response driving among paramedicine students.

Paramedics face various unconventional and secondary task demands while driving ambulances, leading to significant cognitive load, especially during lights-and-sirens responses. Previous research suggests that high cognitive load negatively affects driving performance, increasing the risk of accidents, particularly for inexperienced drivers. The current study investigated the impact of anticipatory treatment planning on cognitive load during emergency driving, as assessed through the use of a driving simulator. We recruited 28 non-paramedic participants to complete a simulated baseline drive with no task and a cognitive load manipulation using the 1-back task. We also recruited 18 paramedicine students who completed a drive while considering two cases they were travelling to: cardiac arrest and infant seizure, representing varying difficulty in required treatment. The results indicated that both cases imposed considerable cognitive load, as indicated by NASA Task Load Index responses, comparable to the 1-back task and significantly higher than driving with no load. These findings suggest that contemplating cases and treatment plans may impact the safety of novice paramedics driving ambulances for emergency response. Further research should explore the influence of experience and the presence of a second individual in the vehicle to generalise to broader emergency response driving contexts.

Analyzing Dual-Task Paradigms to Improve Postconcussion Assessment and Management.

CONTEXT: Dual-task (simultaneous cognitive-motor activities) assessments have been adapted into reliable and valid clinical concussion measures. However, abundant motor and cognitive variations leave researchers and clinicians uncertain about which combinations elicit the intended dual-task effect. Our objective was to examine differences between commonly employed dual-task motor and cognitive combinations among healthy, college-aged individuals. DESIGN: Cross-sectional laboratory study. METHODS: Twenty participants (age: 21.3 [2.4] y; height: 176.0 [9.1] cm; mass: 76.0 [16.4] kg; 20% with concussion history) completed 4 motor tasks (gait, tandem gait, single-leg balance, and tandem balance) under 5 cognitive conditions (single task, subtraction, month reversal, spelling backward, and visual Stroop) in a research laboratory. The motor performance outcomes were spatiotemporal variables for gait and tandem gait and center of pressure path length (in centimeters) for single-leg and tandem balance. Cognitive outcomes were response rate (responses/second) and cognitive accuracy. We used separate repeated-measures analyses of variance for each motor and cognitive outcome with post hoc Tukey t tests. RESULTS: Gait velocity, gait stride length, and tandem gait velocity demonstrated significant cognitive-motor interactions (P's < .001) such that all dual-task conditions resulted in varyingly slower or shorter movement than single task. Conversely, single-leg balance (P = .627) and tandem balance (P = .434) center of pressure path length did not significantly differ among the dual-task cognitive conditions or relative to single task. Statistically significant cognitive-motor interactions were observed only for spelling backward accuracy (P = .004) and response rates for spelling backward, month reversal, and visual Stroop (P's < .001) such that worse accuracy, but faster response rates, occurred during motor tasks. CONCLUSIONS: Gait and tandem gait motor tasks accompanied with spelling backward or subtraction cognitive tasks demonstrated consistently strong dual-task effects and, therefore, may be the best suited for clinical and research use following concussion.

The Bead Maze Hand Function Test for Children.

IMPORTANCE: There is a need for a pediatric hand function test that can be used to objectively assess movement quality. We have developed a toy-based test, the Bead Maze Hand Function (BMHF) test, to quantify how well a child performs an activity. This is achieved by assessing the control of forces applied while drawing a bead over wires of different complexity. OBJECTIVE: To study the psychometric properties of the BMHF test and understand the influence of age and task complexity on test measures. DESIGN: A cross-sectional, observational study performed in a single visit. SETTING: Clinical research laboratory. PARTICIPANTS: Twenty-three participants (ages 4-15 yr) were recruited locally. They were typically developing children with no illness or conditions that affected their movement. Interventions/Assessments: Participants performed the BMHF test and the Box and Block test with both hands. OUTCOMES AND MEASURES: Total force and completion time were examined according to age and task complexity using a linear mixed-effects model. We calculated intraclass correlation coefficients to measure interrater reliability of the method and estimated concurrent validity using the Box and Block test. RESULTS: Total force and completion time decreased with age and depended on task complexity. The total force was more sensitive to task complexity. The Box and Block score was associated with BMHF completion time but not with total force. We found excellent interrater reliability. CONCLUSIONS AND RELEVANCE: A familiar toy equipped with hidden sensors provides a sensitive tool to assess a child's typical hand function. Plain-Language Summary: We developed the Bead Maze Hand Function (BMHF) test to determine how well a child performs an activity with their hands. The BMHF test is a toy equipped with hidden sensors. Twenty-three typically developing children with no illnesses or conditions that affected their hand movement participated in the study. We asked the children to perform the BMHF test with both hands. Our study found that occupational therapists can reliably use the BMHF test to assess a child's hand function.

Individual and team profiling to support theory of mind in artificial social intelligence.

We describe an approach aimed at helping artificial intelligence develop theory of mind of their human teammates to support team interactions. We show how this can be supported through the provision of quantifiable, machine-readable, a priori information about the human team members to an agent. We first show how our profiling approach can capture individual team member characteristic profiles that can be constructed from sparse data and provided to agents to support the development of artificial theory of mind. We then show how it captures features of team composition that may influence team performance. We document this through an experiment examining factors influencing the performance of ad-hoc teams executing a complex team coordination task when paired with an artificial social intelligence (ASI) teammate. We report the relationship between the individual and team characteristics and measures related to task performance and self-reported perceptions of the ASI. The results show that individual and emergent team profiles were able to characterize features of the team that predicted behavior and explain differences in perceptions of ASI. Further, the features of these profiles may interact differently when teams work with human versus ASI advisors. Most strikingly, our analyses showed that ASI advisors had a strong positive impact on low potential teams such that they improved the performance of those teams across mission outcome measures. We discuss these findings in the context of developing intelligent technologies capable of social cognition and engage in collaborative behaviors that improve team effectiveness.

A panoramic driving perception fusion algorithm based on multi-task learning.

With the rapid development of intelligent connected vehicles, there is an increasing demand for hardware facilities and onboard systems of driver assistance systems. Currently, most vehicles are constrained by the hardware resources of onboard systems, which mainly process single-task and single-sensor data. This poses a significant challenge in achieving complex panoramic driving perception technology. While the panoramic driving perception algorithm YOLOP has achieved outstanding performance in multi-task processing, it suffers from poor adaptability of feature map pooling operations and loss of details during downsampling. To address these issues, this paper proposes a panoramic driving perception fusion algorithm based on multi-task learning. The model training involves the introduction of different loss functions and a series of processing steps for lidar point cloud data. Subsequently, the perception information from lidar and vision sensors is fused to achieve synchronized processing of multi-task and multi-sensor data, thereby effectively improving the performance and reliability of the panoramic driving perception system. To evaluate the performance of the proposed algorithm in multi-task processing, the BDD100K dataset is used. The results demonstrate that, compared to the YOLOP model, the multi-task learning network performs better in lane detection, drivable area detection, and vehicle detection tasks. Specifically, the lane detection accuracy improves by 11.6%, the mean Intersection over Union (mIoU) for drivable area detection increases by 2.1%, and the mean Average Precision at 50% IoU (mAP50) for vehicle detection improves by 3.7%.

Priority influences task selection decisions in multi-task management.

The role of task priority on task selection in multi-task management is unclear based on prior work, leading to a common finding of 'priority neglect'. However, properties such as urgency and conflict may influence whether operators weigh priority in their decision. We examined the role of instructed task prioritization, bolstered by more urgent and conflicting conditions, on how operators select among emergent, concurrent tasks when multitasking. Using the Multi-Attribute Task Battery (MATB) multitasking platform we tested both an auditory communications task and a manual tracking task as the priority tasks. Results showed that instructed priority significantly increased target task selection under the conflicting task conditions for both tasks. Urgency itself may modulate whether instructions to prioritize affect task selection choices when multitasking, and therefore counter to prior results instructions may yet be useful for helping operators select a higher priority task under conflict, a generalizable effect to be further explored.

Effect of laparoscopic handle size on surgical performance: A randomized crossover trial.

Laparoscopic instrument handles design and dimensions are crucial to determine the configuration of surgeons' hand grip and, therefore, can have a deleterious effect on overall surgical efficiency and surgeons' comfort. The aim of this study is to investigate the impact of laparoscopic handle size and hand surface area on surgical task performance. A single-blind, randomized crossover trial was carried out with 29 novice medical students. Participants performed three simulated tasks in "black box" simulators using two scissor-type handles of different sizes. Surgical performance was assessed by the number of errors and time required to complete each task. Hand anthropometric data were measured using a 3D scanner. Execution time was significantly higher when cutting and suturing tasks were performed with the smaller handle. In addition, hand surface area was positively correlated with peg transfer task time when performed with the standard handle and was correlated with cutting task time in small and standard handle groups. We also found positive correlations between execution time and the number of errors executed by larger-handed participants. Our findings indicate that laparoscopic handle size and hand area influence surgical performance, highlighting the importance of considering hand anthropometry variances in surgical instrument design.

Revealing complex interdependencies in surgical instrument reprocessing using SEIPS 101 tools.

Sterile Processing Departments (SPDs) must clean, maintain, store, and organize surgical instruments which are then delivered to Operating Rooms (ORs) using a Courier Network, with regular coordination occurring across departmental boundaries. To represent these relationships, we utilized the Systems Engineering Initiative for Patient Safety (SEIPS) 101 Toolkit, which helps model how health-related outcomes are affected by healthcare work systems. Through observations and interviews which built on prior work system analyses, we developed a SEIPS 101 journey map, PETT scan, and tasks matrices to represent the instrument reprocessing work system, revealing complex interdependencies between the people, tools, and tasks occurring within it. The SPD, OR and Courier teams are found to have overlapping responsibilities and a clear co-dependence, with critical implications for the successful functioning of the whole hospital system.

Pre-ANDA strategy and Human Factors activities to de-risk pharmaceutical companies ANDA submission of drug-device combination products: case study of a formative Comparative Use Human Factors study.

BACKGROUND: This article presents a strategy that a Drug Delivery Device Developer (DDDD) has adopted to support Abbreviated New Drug Application (ANDA) submissions of drug-device combination products. As per the related FDA guidance, a threshold analysis should be compiled. If 'other differences' between the Reference Listed Drug (RLD) and the generic drug devices are identified, a Comparative Use Human Factors (CUHF) study may be requested. METHODS: The DDDD performed task analysis and physical comparison to assess the pen injector design differences. Then, a formative CUHF study with 25 participants simulating injections using both RLD and the generic pen injectors was conducted. RESULTS: After each participant completed four simulated injections, similar type and rates of use error between the RLD (0.70) and generic (0.68) pen injectors were observed. CONCLUSION: DDDDs can support pharmaceutical companies in the ANDA submission strategy of their drug-device combination product by initiating comparative task analysis and physical comparison of the device as inputs for the threshold analysis. If 'other differences' are identified, a formative CUHF study can be performed. As shown in our case study, this approach can be leveraged to support the sample size calculation and non-inferiority margin determination for a CUHF study with the final combination product.

How do visual, auditory and motor dual-tasking each affect swallowing and chewing function?

BACKGROUND: It can be challenging to perform a second task at the same time as swallowing. OBJECTIVE(S): The study aimed to investigate the effect of visual, auditory and motor dual-tasking on swallowing and chewing function in healthy young adults. METHOD: Right-handed healthy adults without any psychological and cognitive problems were included in the study. Swallowing was evaluated based on the dysphagia limit in different liquid textures such as water and nectar consistencies, and chewing was evaluated by the Test of Masticating and Swallowing Solids. For the second task, visual and auditory performance was assessed using reaction time, and the motor performance was assessed using a bilateral tapping task. Assessments were performed in two steps: baseline and dual-task. For baseline, all evaluation methods were applied individually. After completing the baseline assessment, dual-task assessment were carried out the following day. For dual-task assessment, the swallowing and chewing tasks were performed simultaneously with visual, auditory and motor tasks. RESULTS: Results showed a significant decrease in dysphagia limit in the nectar consistency, and significant increase in chewing time, visual reaction time and tapping rate (right-left) when compared to baseline and dual-task conditions (χ2(3) = 9.61, p = .02; χ2(3) = 9.02, p = .02; χ2(3) = 28.09, p < .001; χ2(3) = 28.97, p < .001; χ2(3) = 21.56, p < .001, respectively). However, there were no differences in dysphagia limit in the water and auditory reaction time compared to baseline and dual-task conditions (χ2(3) = 3.18, p = .36; χ2(3) = 2.56, p = .50, respectively). CONCLUSION: Results shedding light on how simultaneous dual tasks can influence swallowing and chewing. Dual-tasking cause a decrease in both swallowing/chewing and the visual/motor performances. These results may provide valuable information for designing interventions or strategies aimed at improving or maintaining optimal swallowing and chewing during in various populations during daily life.