Preparation of nanoparticle and nanoemulsion formulations containing repaglinide and determination of pharmacokinetic parameters in rats.

Repaglinide (RPG) belongs to the class of drugs known as meglitinides and is used for improving and maintaining glycemic control in the treatment of patients with Type 2 diabetes. RPG is a Class II drug (BCS) because of its high permeability and low water solubility. It also undergoes hepatic first-pass metabolism. The oral bioavailability of RPG is low (about 56 %) due to these drawbacks. Our aim in this study is to prepare two different nano-sized drug carrier systems containing RPG (nanoparticle: RPG-PLGA-Zein-NPs or nanoemulsion: RPG-NE) and to carry out a pharmacokinetic study for these formulations. We prepared NPs using PLGA and Zein. In addition, a single NE formulation was developed using Tween 80 and Pluronic F68 as surfactants and Labrasol as co-surfactant. The droplet size values of the blank-NE and RPG-NE formulations were found to be less than 120 nm. The mean particle sizes of blank-Zein-PLGA-NPs and RPG-Zein-PLGA-NPs were less than 260 nm. The Cmax and tmax values of RPG-Zein-PLGA-NPs and RPG-NE (523 ± 65 ng/mL and 770 ± 91 ng/mL; 1.41 ± 0.46 h and 1.61 ± 0.37 h, respectively) were meaningfully higher than those of free RPG (280 ± 33 ng/mL; 0.72 ± 0.28 h) (p < 0.05). The AUC0-∞ values calculated for RPG-Zein-PLGA-NPs and RPG-NE were approximately 4.04 and 5.05 times higher than that calculated for free RPG. These nanosized drug delivery systems were useful in increasing the oral bioavailability of RPG. Moreover, the NE formulation was more effective than the NP formulation in improving the oral bioavailability of RPG (p < 0.05).

Novel PEI/Zein core-shell composite as mixed-mode stationary phase for high performance liquid chromatography.

Based on the adhesion of polyethyleneimine (PEI), a novel PEI/zein co-modified core-shell stationary phase (PEI/Zein@SiO2) was prepared by doping zein to form a composite modification layer. The stationary phase achieved effective separation of nucleosides, bases and antibiotics in hydrophilic interaction mode on account of the hydrophilic groups of composite coating. With the hydrophobicity of zein, the flavones could be separated in reversed-phase mode. In short, the separation and analysis of hydrophilic/hydrophobic compounds were accomplished excellently by the PEI/Zein@SiO2 column with mixed double mode. The prepared chromatographic stationary phase not only avoided the dissolution of zein, but also covered the strong adsorption of some analytes caused by silica hydroxyl groups on the surface of silica spheres. The morphological structure and specific surface area of the material were reflected by various characterization techniques. Hydrophilic/hydrophobic compounds were used as tested analytes to research separation performance and retention mechanisms of PEI/Zein@SiO2 column. The stability and reproducibility of the PEI/Zein@SiO2 stationary phase were satisfied. Therefore, the modification of zein could improve the separation selectivity of stationary phase effectively for complex samples, which had the potential to be one of the significant potential application materials in stationary phase packing.

Enhancement of lemongrass essential oil physicochemical properties and antibacterial activity by encapsulation in zein-caseinate nanocomposite.

Essential oils (EOs) represent a pivotal source for developing potent antimicrobial drugs. However, EOs have seldom found their way to the pharmaceutical market due to their instability and low bioavailability. Nanoencapsulation is an auspicious strategy that may circumvent these limitations. In the current study, lemongrass essential oil (LGO) was encapsulated in zein-sodium caseinate nanoparticles (Z-NaCAS NPs). The fabricated nanocomposite was characterized using dynamic light scattering, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and transmission electron microscopy. The antimicrobial activity of LGO loaded NPs was assessed in comparison to free LGO against Staphylococcus epidermidis, Enterococcus faecalis, Escherichia coli, and Klebsiella pneumoniae. Furthermore, their antibacterial mechanism was examined by alkaline phosphatase, lactate dehydrogenase, bacterial DNA and protein assays, and scanning electron microscopy. Results confirmed the successful encapsulation of LGO with particle size of 243 nm, zeta potential of - 32 mV, and encapsulation efficiency of 84.7%. Additionally, the encapsulated LGO showed an enhanced thermal stability and a sustained release pattern. Furthermore, LGO loaded NPs exhibited substantial antibacterial activity, with a significant 2 to 4 fold increase in cell wall permeability and intracellular enzymes leakage versus free LGO. Accordingly, nanoencapsulation in Z-NaCAS NPs improved LGO physicochemical and antimicrobial properties, expanding their scope of pharmaceutical applications.

Fabrication and functional application of zein-based core-shell structures: A review.

Core-shell structures exhibit a number of distinct absorptive properties that make them attractive tools for use in a range of industrial contexts including pharmaceuticals, biotechnology, cosmetics, and food/agriculture. Several recent studies have focused on the development and fabrication of zein-based core-shell structures for a range of functional material deliveries. However, no recent review article has evaluated the fabrication of such core-shell structures for food-based applications. In this paper, we therefore survey current approaches to fabricating different zein-based platforms including particles, fibers, films, and hydrogels that have appeared in a variety of functionally relevant applications. In addition, we highlight certain challenges and future research directions in this field, thereby providing a novel perspective on zein-based core-shell structures.

Synergistic stabilization of a menthol Pickering emulsion by zein nanoparticles and starch nanocrystals: Preparation, structural characterization, and functional properties.

A Pickering emulsion was synergistically stabilised with zein nanoparticles (ZNPs) and starch nanocrystals (SNCs) to prepare it for menthol loading. After response surface optimisation of the emulsion preparation conditions, a Pickering emulsion prepared with a ZNPs:SNCs ratio of 1:1, a particle concentration of 2 wt% and a water:oil ratio of 1:1 provided the highest menthol encapsulation rate of the emulsions tested (83%) with good storage stability within 30 days. We examined the bilayer interface structure of the emulsion by optical microscopy, scanning electron microscopy, and confocal laser scanning microscopy. The results of simulated digestion experiments showed that the release rate of free fatty acid was 75.06 ± 1.23%, which ensured bioavailability. At the same time, the emulsions facilitated the slow release of menthol. Bacteriostatic studies revealed that the Pickering emulsion had a protective effect on menthol, with the most significant inhibitory effects on Escherichia coli and Staphylococcus aureus under the same conditions. Overall, this study proposes a novel approach for the application and development of l-menthol by combining it with Pickering emulsion.

Stabilization of zein nanoparticles with tween-80 and fucoidan for encapsulation of eugenol via a nozzle simulation chip.

Eugenol (EU), a natural bioactive compound found in various plants, offers numerous health benefits, but its application in the food and pharmaceutical industry is limited by its high volatility, instability, and low water solubility. Therefore, this study aimed to utilize the surface coating technique to develop zein-tween-80-fucoidan (Z-T-FD) composite nanoparticles for encapsulating eugenol using a nozzle simulation chip. The physicochemical characteristics of the composite nanoparticles were examined by varying the weight ratios of Z, T, and FD. Results showed that the Z-T-FD weight ratio of 5:1:15 exhibited excellent colloidal stability under a range of conditions, including pH (2-8), salt concentrations (10-500 mmol/L), heating (80 °C), and storage (30 days). Encapsulation of EU into Z-T-FD nanoparticles (0.5:5:1:15) resulted in an encapsulation efficiency of 49.29 ± 1.00%, loading capacity of 0.46 ± 0.05%, particle size of 205.01 ± 3.25 nm, PDI of 0.179 ± 0.006, and zeta-potential of 37.12 ± 1.87 mV. Spherical structures were formed through hydrophobic interaction and hydrogen bonding, as confirmed by Fourier transform infrared spectroscopy and molecular docking. Furthermore, the EU-Z-T-FD (0.5:5:1:15) nanoparticles displayed higher in vitro antioxidant properties (with DPPH and ABTS radical scavenging properties at 75.28 ± 0.16% and 39.13 ± 1.22%, respectively), in vitro bioaccessibility (64.78 ± 1.37%), and retention rates under thermal and storage conditions for EU compared to other formulations. These findings demonstrate that the Z-T-FD nanoparticle system can effectively encapsulate, protect, and deliver eugenol, making it a promising option for applications in the food and pharmaceutical industries.

The silibinin-loaded Zein-ß cyclodextrin nano-carriers (SZBC-NCs) as a novel selective cancer cell drug delivery system in HT-29 cell line.

Entrapping phytochemical bioactive compounds into nano-structured biocompatible polymers has been successfully utilized for improving cancer treatment efficiency. Silibinin is a potent compound that shows promising anticancer properties. In the present study, the Zein-ß-cyclodextrin complex was used to encapsulate silibinin and evaluate the induced cell death type and cytotoxic impacts on human cancer cells. The silibinin-loaded Zein-ß cyclodextrin nano-carriers (SZBC-NCs) were synthesized utilizing a gradual ultrasound-mediated homogenization technique and characterized by Zeta potential, DLS, FESEM, and FTIR analysis. The SZBC-NCs' antioxidant activity was studied by conducting ABTS and DPPH radical scavenging assays. Finally, the SZBC-NCs selective toxicity and cellular death induction mechanism were studied on the HT-29 and AGS cancer cells by measuring the cell survival and apoptotic gene (Caspase 3, 9), respectively, which were verified by conducting the DAPI staining analysis. The negatively charged (- 27.47 mV) nanoparticles (286.55 nm) showed significant ABTS and DPPH radical scavenging activity. Moreover, the remarkable decrease in the IC50 concentrations of the SZBC-NCs among the HT-29 and AGS cancer cell lines exhibited their selective cytotoxic potential. Also, the overexpressed apoptotic (Caspases 3 and 9) and down-regulated necrotic (NFKB) gene expressions following the SZBC-NCs treatment doses indicated the apoptotic activity of SZBC-NCs, which were verified by the increased apoptotic morphology of the DAPI-stained HT-29 cancer cells. The antioxidant and colon cancer cell-related apoptotic activity of the SZBC-NCs make it an appropriate anti-colon cancer nano delivery system. Therefore, they can potentially be used as a safe efficient colon cancer treatment strategy. However, further in vivo experiments including animal cancer models have to be studied.

Caseinate-coated zein nanoparticles as potential delivery vehicles for guavinoside B from guava: Molecular interactions and encapsulation properties.

Guavinoside B (GUB) is a characteristic constituent from guava with strong antioxidant activity; however, its low water solubility limits its utilization. Herein, we investigated the interaction between GUB and zein, a prolamin with self-assembling property, using multiple spectroscopic methods and fabricated GUB-zein-NaCas nanoparticles (GUB-Z-N NPs) via the antisolvent coprecipitation approach. GUB caused fluorescence quenching to zein via the static quenching mechanism. Fourier-transform infrared spectroscopy and computational analysis revealed that GUB bound to zein via van der Waals interaction, hydrogen bond, and hydrophobic forces. The GUB-Z-N NPs were in the nanometric size range (< 200 nm) and exhibited promising encapsulation efficiency and redispersibility after freeze-drying. These particles remained stable for up to 31 days at 4 °C and great resistance to salt and pH variation, and displayed superior antioxidant activity to native GUB. The current study highlights the potential of zein-based nanoparticles as delivery vehicles for GUB in the food industry.

New Zein Protein Composites with High Performance in Phosphate Removal, Intrinsic Antibacterial, and Drug Delivery Capabilities.

Herein, poly(N-(4-aminophenyl)methacrylamide)-carbon nano-onions [abbreviated as PAPMA-CNOs (f-CNOs)] integrated gallic acid cross-linked zein composite fibers (ZG/f-CNOs) were developed for the removal/recovery of phosphate from wastewater along with controlled drug delivery and intrinsic antibacterial characteristics. The composite fibers were produced by Forcespinning followed by a heat-pressure technique. The obtained ZG/f-CNOs composite fibers presented several favorable characteristics of nanoadsorbents and drug carriers. The composite fibers exhibited excellent adsorption capabilities for phosphate ions. The adsorption assessment demonstrated that composite fibers process highly selective sequestration of phosphate ions from polluted water, even in the presence of competing anions. The ZG/f-CNOs composite fibers presented a maximum phosphate adsorption capacity (qmax) of 2500 mg/g at pH 7.0. This represents the most efficient phosphate adsorption system among all of the reported nanocomposites to date. The isotherm studies and adsorption kinetics of the adsorbent showed that the adsorption experiments followed the pseudo-second-order and Langmuir isotherm model (R2 = 0.9999). After 13 adsorption/desorption cycles, the adsorbent could still maintain its adsorption efficiency of 96-98% at pH 7.0 while maintaining stability under thermal and chemical conditions. The results mark significant progress in the design of composite fibers for removing phosphates from wastewater, potentially aiding in alleviating eutrophication effects. Owing to the f-CNOs incorporation, ZG/f-CNOs composite fibers exhibited controlled drug delivery. An antibiotic azithromycin drug-encapsulated composite fibers presented a pH-mediated drug release in a controlled manner over 18 days. Furthermore, the composite fibers displayed excellent antibacterial efficiency against Gram-positive and Gram-negative bacteria without causing resistance. In addition, zein composite fibers showed augmented mechanical properties due to the presence of f-CNOs within the zein matrix. Nonetheless, the robust zein composite fibers with inherent stimuli-responsive drug delivery, antibacterial properties, and phosphate adsorption properties can be considered promising multifunctional composites for biomedical applications and environmental remediation.

Fabrication of zein-coated brush-like silica nanocarriers for high foliage deposition and responsive release of pesticide.

Responsive release systems have received extensive attention to enhance pesticide utilization efficiency and reduce environmental pollution. In this study, pH/GSH dual responsive release system based on brush-like silica (bSiO2) carriers was constructed to enhance the utilization of pesticides. The bSiO2 carriers present core-shell structure, length of 550 nm, diameter of 350 nm and shell thickness of 100 nm. The carrier had a high pesticide loading (20.0 %, w/w) for dinotefuran (Din). After loading Din, zein was covalently linked with cysteine-bridge to seal the loaded pesticides (namely Din@bSiO2@Zein). The Din@bSiO2@Zein exhibited superior foliar affinity, retention and photostability, and retention rate still remain above 95 % with 220 min UV irradiation. Din@bSiO2@Zein displayed pH/GSH responsive release and the cumulative release within 92 h was up to 81 % under pH=9/CGSH=6 mM, mimicking the microenvironment of lepidopteran. The Din@bSiO2@Zein possessed good control efficacy against Plutella xylostella. Appreciably, Din@bSiO2@Zein could be transported bi-directionally to various regions of tobacco plants within 24 h, which had potential to promote pesticide efficacy. This work offers a strategy to minimize the pesticide dosage and encourage sustainable agricultural development.

Shellac-based delivery systems for food bioactive compounds.

Shellac is a natural resin featuring some attractive properties such as amphiphilicity, pH responsiveness, biocompatibility, and biodegradability. There has been increasing interest in employing shellac for controlled delivery of food bioactive compounds. This review outlines the recent advances in different types of shellac-based delivery systems, including nanoparticles, zein-shellac particles, hydrogels, nanofibers, and nanomicelles. The preparation method, formation mechanism, structure, and delivery performance are investigated. These systems could improve the stability and shelf-life of bioactive compounds, allow for targeted release at the small intestine or colon site, and increase bioavailability. The deficiencies and challenges of each of the systems are also discussed. The promising results in this review could guide future trends in more efficient shellac-based delivery platforms for functional food applications.

Construction of quaternary ammonium chitosan-coated protein nanoparticles as novel delivery system for curcumin: Characterization, stability, antioxidant activity and bio-accessibility.

This research aimed to develop a novel, effective, and stable delivery system based on zein (ZE), sodium caseinate (SC), and quaternary ammonium chitosan (HACC) for curcumin (CUR). The pH-driven self-assembly combined with electrostatic deposition methods were employed to construct CUR-loaded ZE-SC nanoparticles with HACC coating (ZE-SC@HACC). The optimized nanocomposite was prepared at ZE:SC:HACC:CUR mass ratios of 1:1:2:0.1, and it had encapsulation efficiency of 89.3%, average diameter of 218.2 nm, and ζ-potential of 40.7 mV. The assembly of composites and encapsulation of CUR were facilitated primarily by hydrophobic, hydrogen-bonding, and electrostatic interactions. Physicochemical stability analysis revealed that HACC coating dramatically enhanced ZE-SC nanoparticles' colloidal stability and CUR's resistance to chemical degradation. Additionally, antioxidant activity and simulated digestion results indicated that CUR-ZE-SC@HACC nanoparticles showed higher free radical scavenging capacity and bio-accessibility of CUR than CUR-ZE-SC nanoparticles and free CUR. Therefore, the ZE-SC@HACC nanocomposite is an effective and viable delivery system for CUR.

The smart nanocarrier containing zein/starch co-biopolymers enhanced by graphitic carbon nitride; exploring opportunities in brain cancer treatment.

In this investigation, we present an innovative pH-responsive nanocomposite designed to address challenges associated with using 5-Fluorouracil (5-FU) in cancer therapy. The nanocomposite containing zein (Z), starch (S), and graphitic carbon nitride (g-C3N4) macromolecules is synthesized by a water-in-oil-in-water (W/O/W) double emulsion technique, serving as a carrier for 5-FU. The S/Z hydrogel matrix's entrapment and loading efficiency are greatly improved by adding g-C3N4 nanosheets, reaching noteworthy values of 45.25 % and 86.5 %, respectively, for drug loading efficiency and entrapment efficiency. Characterization through FTIR and XRD validates the successful loading of 5-FU, elucidating the chemical bonding within the nanocomposite and crystalline characteristics. Structural analysis using FESEM, along with DLS and zeta potential measurements, reveals an average nanocomposite size of 193.48 nm, indicating a controlled structure, and a zeta potential of -42.32 mV, signifying a negatively charged surface. Studies on the in vitro release of drugs reveal that 5-FU is delivered more effectively and sustainably in acidic environments than in physiological circumstances. This highlights the fact that the created nanocarrier is pH-sensitive. Modeling release kinetics involves finding the right mathematical conditions representing underlying physicochemical processes. Employing curve-fitting techniques, predominant release mechanisms are identified, and optimal-fitting kinetic models are determined. The Baker kinetic model performed best at pH 7.4, indicating that the leading cause of the drug release was polymer swelling. In contrast, the Higuchi model was most accurate for drug release at pH 5.4, illuminating the diffusion and dissolution mechanisms involved in diffusion. To be more precise, the mechanism of release at pH 7.4 and 5.4 was anomalous transport (dissolution-controlled), according to the Korsmeyer-Peppas mathematical model. The pH-dependent swelling and degradation behavior of S/Z/g-C3N4@5-FU nanocomposite showed higher swelling and faster degradation in acidic environments compared to neutral conditions. Crucially, outcomes from the MTT test affirm the significant cytotoxicity of the 5-FU-loaded nanocomposite against U-87 MG brain cancer cells, while simultaneously indicating non-toxicity towards L929 fibroblast cells. These cumulative findings underscore the potential of the engineered S/Z/g-C3N4@5-FU as a productive and targeted therapeutic approach for cancer cells.

Preparation, structural characterization, and functional attributes of zein-lysozyme-κ-carrageenan ternary nanocomposites for curcumin encapsulation.

The low water solubility and inadequate bioavailability of curcumin significantly hinder its broad biological applications in the realms of food and medicine. There is limited information currently available regarding the particle characteristics and functional capabilities of zein-lysozyme-based nanomaterials. Thereby, the primary goal of the current work is to effectively develop innovative zein-lysozyme-κ-carrageenan complex nanocomposites (ZLKC) as a reliable carrier for curcumin encapsulation. As a result, ZLKC nanoparticles showed a smooth spherical nanostructure with improved encapsulation efficiency. Fourier-transform infrared, fluorescence spectroscopy, dissociation assay, and circular dichroism analysis revealed that hydrophobic and electrostatic interactions and hydrogen bonding were pivotal in the construction and durability of these composites. X-ray diffraction examination affirmed the lack of crystallinity in curcumin encapsulated within nanoparticles. The incorporation of κ-carrageenan significantly improved the physicochemical stability of ZLKC nanoparticles in diverse environmental settings. Additionally, ZLKC nanocomposites demonstrated enhanced antioxidant and antimicrobial properties, as well as sustained release characteristics. Therefore, these findings demonstrate the potential application of ZLKC nanocomposites as delivery materials for encapsulating bioactive substances.

Conformations of a highly expressed Z19 α-zein studied with AlphaFold2 and MD simulations.

α-zeins are amphiphilic maize seed storage proteins with material properties suitable for a multitude of applications e.g., in renewable plastics, foods, therapeutics and additive manufacturing (3D-printing). To exploit their full potential, molecular-level insights are essential. The difficulties in experimental atomic-resolution characterization of α-zeins have resulted in a diversity of published molecular models. However, deep-learning α-zein models are largely unexplored. Therefore, this work studies an AlphaFold2 (AF2) model of a highly expressed α-zein using molecular dynamics (MD) simulations. The sequence of the α-zein cZ19C2 gave a loosely packed AF2 model with 7 α-helical segments connected by turns/loops. Compact tertiary structure was limited to a C-terminal bundle of three α-helices, each showing notable agreement with a published consensus sequence. Aiming to chart possible α-zein conformations in practically relevant solvents, rather than the native solid-state, the AF2 model was subjected to MD simulations in water/ethanol mixtures with varying ethanol concentrations. Despite giving structurally diverse endpoints, the simulations showed several patterns: In water and low ethanol concentrations, the model rapidly formed compact globular structures, largely preserving the C-terminal bundle. At ≥ 50 mol% ethanol, extended conformations prevailed, consistent with previous SAXS studies. Tertiary structure was partially stabilized in water and low ethanol concentrations, but was disrupted in ≥ 50 mol% ethanol. Aggregated results indicated minor increases in helicity with ethanol concentration. ß-sheet content was consistently low (∼1%) across all conditions. Beyond structural dynamics, the rapid formation of branched α-zein aggregates in aqueous environments was highlighted. Furthermore, aqueous simulations revealed favorable interactions between the protein and the crosslinking agent glycidyl methacrylate (GMA). The proximity of GMA epoxide carbons and side chain hydroxyl oxygens simultaneously suggested accessible reactive sites in compact α-zein conformations and pre-reaction geometries for methacrylation. The findings may assist in expanding the applications of these technologically significant proteins, e.g., by guiding chemical modifications.

High internal phase pickering emulsions stabilized by zein/whey protein nanofibril complexes: Preparation and lycopene loading.

High internal phase Pickering emulsions (HIPPEs) prepared from natural polymers have attracted much attention in the food manufactures. However, single zein-stabilized HIPPEs are poorly stable and prone to flocculation near the isoelectric point. To address this issue, in this study, zein and whey protein nanofibrils (WPN) complex nanoparticles (ZWNPs) were successfully prepared using a pH-driven method, and ZWNPs were further used as HIPPEs stabilizers. The results showed that zein and WPN were combined together through hydrogen bonding and hydrophobic interaction to form ZWNPs, and the HIPPEs stabilized by ZWNPs had excellent stability, which could effectively protect the internally encapsulated lycopene and improve the bioaccessibility of lycopene. In conclusion, this study provides a new strategy for the preparation of stable hydrophobic protein-based HIPPEs, represented by zein.

Enhancing plant-based cheese formulation through molecular docking and dynamic simulation of tocopherol and retinol complexes with zein, soy and almond proteins via SVM-machine learning integration.

The current study addresses the growing demand for sustainable plant-based cheese alternatives by employing molecular docking and deep learning algorithms to optimize protein-ligand interactions. Focusing on key proteins (zein, soy, and almond protein) along with tocopherol and retinol, the goal was to improve texture, nutritional value, and flavor characteristics via dynamic simulations. The findings demonstrated that the docking analysis presented high accuracy in predicting conformational changes. Flexible docking algorithms provided insights into dynamic interactions, while analysis of energetics revealed variations in binding strengths. Tocopherol exhibited stronger affinity (-5.8Kcal/mol) to zein compared to retinol (-4.1Kcal/mol). Molecular dynamics simulations offered comprehensive insights into stability and behavior over time. The integration of machine learning algorithms improved the classification and the prediction accuracy, achieving a rate of 71.59%. This study underscores the significance of molecular understanding in driving innovation in the plant-based cheese industry, facilitating the development of sustainable alternatives to traditional dairy products.

Advanced ethylene-absorbing and cushioning depending on the 3D porous-structured fruit packaging: Toward polyurethane foam manipulation using zein and soybean oil polyol substrates.

Fruits are essential sources of nutrients in our daily diet; however, their spoilage is often intensified by mechanical damage and the ethylene phytohormone, resulting in significant economic losses and exacerbating hunger issues. To address these challenges, this study presented a straightforward in situ synthesis protocol for producing Z/SOPPU foam, a 3D porous-structured fruit packaging. This innovative packaging material offered advanced ethylene-adsorbing and cushioning capabilities achieved through stirring, heating, and standing treatments. The results demonstrated that the Z/SOPPU foam, with its porous structure, served as an excellent packaging material for fruits, maintaining the intact appearance of tomatoes even after being thrown 72 times from a height of 1.5 m. Additionally, it exhibited desirable hydrophobicity (contact angle of 114.31 ± 0.82°), degradability (2.73 ± 0.88 % per 4 weeks), and efficient ethylene adsorption (adsorption rate of 13.2 ± 1.7 mg/m3/h). These remarkable characteristics could be attributed to the unique 3D micron-porous configuration, consisting of soybean oil polyol polyurethane foam for mechanical strain cushioning and zein for enhanced ethylene adsorption efficiency. Overall, this research offers an effective and original approach to the rational design and fabrication of advanced bio-based fruit packaging.

Effects of zein extractions on the structural properties of SPI-zein composite gels: Implications for gluten-free plant-based products.

The growing global interest in physical and environmental health has led to the development of plant-based products. Although soy protein and wheat gluten are commonly utilized, concerns regarding gluten-related health issues have driven exploration into alternative proteins. Zein has emerged as a promising option. This research investigated the impact of extraction methods on zein characteristics and the structures of SPI-zein composite gels. Different extraction methods yielded zein with protein contents ranging from 48.12 % to 64.34 %. Ethanol-extracted Z1 and Z3, obtained at different pH conditions, exhibited zeta potential of -3.25 and 5.43 mV, respectively. They displayed similar characteristics to commercial zein and interacted comparably in composite gels. Conversely, alkaline-extracted Z2 had a zeta potential of -2.37 mV and formed distinct gels when combined with SPI. These results indicated that extraction methods influence zein behaviour in composite gels, offering possibilities for tailored formulations and expanding zein's applications, particularly in gluten-free plant-based products.

Chitosan/zein-based sustained-release composite films: Fabrication, physicochemical properties and release kinetics of tea polyphenols from polymer matrix.

This study investigated the properties of chitosan/zein/tea polyphenols (C/Z/T) films and analyzed the release kinetics of tea polyphenols (TP) in various food simulants to enhance the sustainability and functionality of food packaging. The results revealed that TP addition enhanced the hydrophilicity, opacity and mechanical properties of film, and improved the compatibility between film matrix. 1.5 % TP film showed the lowest lightness (76.4) and the highest chroma (29.1), while 2 % TP film had the highest hue angle (1.5). However, the excessive TP (above 1 % concentration) led to a decrease in compatibility and mechanical properties of film. The TP concentration (2 %) resulted in the highest swelling degree in aqueous (750.6 %), alcoholic (451.1 %), and fatty (6.4 %) food simulants. The cumulative release of TP decreased to 16.32 %, 47.13 %, and 5.87 % with the increase of TP load in the aqueous, alcoholic, and fatty food simulants, respectively. The Peleg model best described TP release kinetics. The 2 % TP-loaded film showed the highest DPPH (97.13 %) and ABTS (97.86 %) free radical scavenging activity. The results showed TP release influenced by many factors and obeyed Fick's law of diffusion. This study offered valuable insights and theoretical support for the practical application of active films.