Indicator displacement-based colorimetric assay for dibutyl phthalate in pharmaceutical products with titanium(IV)-pyridylazo resorcinol (PAR).

Taking advantage of the competitive binding affinity towards Ti(IV) between 4-(2-pyridylazo) resorcinol (PAR) and phthalate, a simple indicator displacement (ID)-based colorimetric assay was designed for indirect determination of a well-known phthalic acid ester, dibutyl phthalate (DBP). The indicator PAR and Ti(IV) formed a purplish-red-colored Ti(IV)-PAR complex (λmax = 540 nm) at a 1:1 ratio. In the presence of pre-hydrolyzed DBP, colorless complex formation of phthalate ion (emerging from alkaline hydrolysis of DBP) with Ti(IV) resulted in a hypsochromic shift in absorbance maximum, accompanying a color change from purplish-red to yellowish-orange (λmax = 390 nm) by the release of PAR from Ti(IV)-PAR system. Based on this mechanism, the linear response range of the system for DBP was found to lie between 0.16 and 0.37 mmol L-1 with an experimental detection limit of 11.6 µmol L-1. The recommended Ti(IV)-PAR system was successfully applied to DBP-containing pharmaceutical products (as real sample) after a simple clean-up process for removing possible water-soluble interferents. The analytical results obtained from the recommended method (by applying the standard addition approach) and the reference liquid chromatography-tandem mass spectrometric (LC-MS/MS) method were statistically compared using DBP-extract of the drug samples. Consequently, a simple and selective colorimetric ID strategy was proposed for the analysis of DBP in pharmaceuticals for the first time.

Fabrication of a Novel Optical Glucose Biosensor Using Copper(II) Neocuproine as a Chromogenic Oxidant and Glucose Dehydrogenase-Immobilized Magnetite Nanoparticles.

This study describes a novel optical glucose biosensor based on a colorimetric reaction between reduced nicotinamide adenine dinucleotide (NADH) and a copper(II) neocuproine complex ([Cu(Nc)2]2+) as a chromogenic oxidant. An enzymatic reaction takes place between glucose and glucose dehydrogenase (GDH)-chitosan (CS) immobilized on silanized magnetite nanoparticles (CS@SiO2@Fe3O4) in the presence of coenzyme NAD+. The oxidation of glucose to gluconolactone via the immobilized enzyme is coupled with the reduction of NAD+ to NADH at the same time. After the separation of GDH-immobilized SiO2@Fe3O4 with a magnet, the enzymatically produced NADH chemically reduces the chromogenic oxidant cupric neocuproine to the cuprous chelate. Thus, the glucose biosensor is fabricated based on the measurement of the absorbance of the formed yellow-orange complex ([Cu(Nc)2]+) at 450 nm. The obtained results show that the colorimetric biosensor has a wide linear response range for glucose, between 1.0 and 150.0 µM under optimized conditions. The limit of detection and limit of quantification were found to be 0.31 and 1.02 µM, respectively. The selectivity properties of the fabricated biosensor were tested with various interfering species. This biosensor was applied to various samples, and the obtained results suggest that the fabricated optical biosensor can be successfully used for the selective and sensitive determination of glucose in real samples.

Heteroatom-Doped Carbon Quantum Dots and Polymer Composite as Dual-Mode Nanoprobe for Fluorometric and Colorimetric Determination of Picric Acid.

Oxygen- and nitrogen-heteroatom-doped, water-dispersible, and bright blue-fluorescent carbon dots (ON-CDs) were prepared for the selective and sensitive determination of 2,4,6-trinitrophenol (picric acid, PA). ON-CDs with 49.7% quantum yield were one-pot manufactured by the reflux method using citric acid, d-glucose, and ethylenediamine precursors. The surface morphology of ON-CDs was determined by scanning transmission electron microscopy, high-resolution transmission electron microscopy, dynamic light scattering, Raman, infrared, and X-ray photoelectron spectroscopy techniques, and their photophysical properties were estimated by fluorescence spectroscopy, UV-vis spectroscopy, fluorescence lifetime measurement, and 3D-fluorescence excitation-emission matrix analysis. ON-CDs at an average particle size of 3.0 nm had excitation/emission wavelengths of 355 and 455 nm, respectively. With the dominant inner-filter effect- and hydrogen-bonding interaction-based static fluorescence quenching phenomena supported by ground-state charge-transfer complexation (CTC), the fluorescence of ON-CDs was selectively quenched with PA in the presence of various types of explosives (i.e., 2,4,6-trinitrotoluene, tetryl, 1,3,5-trinitroperhydro-1,3,5-triazine, 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane, pentaerythritol tetranitrate, 3-nitro-1,2,4-triazole-5-one, and TATP-hydrolyzed H2O2). The analytical results showed that the emission intensity varied linearly with a correlation coefficient of 0.9987 over a PA concentration range from 1.0 × 10-9 to 11.0 × 10-9 M. As a result of ground-state interaction (H-bonding and CTC) of ON-CDs with PA, an orange-colored complex was formed different from the characteristic yellow color of PA in an aqueous medium, allowing naked-eye detection of PA. The detection limits for PA with ON-CDs were 12.5 × 10-12 M (12.5 pM) by emission measurement and 9.0 × 10-10 M (0.9 nM) by absorption measurement. In the presence of synthetic explosive mixtures, common soil cations/anions, and camouflage materials, PA was recovered in the range of 95.2 and 102.5%. The developed method was statistically validated against a reference liquid chromatography coupled to tandem mass spectrometry method applied to PA-contaminated soil. In addition, a poly(vinyl alcohol)-based polymer composite film {PF(ON-CDs)} was prepared by incorporating ON-CDs, enabling the smartphone-assisted fluorometric detection of PA.

Visual colorimetric sensor for nitroguanidine detection based on hydrogen bonding-induced aggregation of uric acid-functionalized gold nanoparticles.

A colorimetric assay is proposed for the quantification of nitroguanidine (NQ), based on triggering the aggregation of uric acid-modified gold nanoparticles (AuNPs@UA) by intermolecular hydrogen bonding interaction between uric acid (UA) and NQ. The red-to-purplish blue (lavender) color change of AuNPs@UA with increasing NQ concentrations could be perceived with the naked eye or detected by UV-vis spectrophotometry. The absorbance versus concentration correlation gave a linear calibration curve in the range of 0.6-3.2 mg L-1 NQ, with a correlation coefficient of 0.9995. The detection limit of the developed method was 0.063 mg L-1, lower than those of noble metal aggregation methods in the literature. The synthesized and modified AuNPs were characterized using UV-vis spectrophotometry, scanning transmission electron microscopy (STEM), dynamic light scattering (DLS), and Fourier transform infrared spectroscopy (FTIR). Some critical parameters such as modification conditions of AuNPs, UA concentration, solvent environment, pH, and reaction time were optimized for the proposed method. The non-interference of common explosives (i.e., nitroaromatic, nitramine, nitrate ester, insensitive and inorganic explosives), common soil and groundwater ions (Na+, K+, Ca2+, Mg2+, Cu2+, Fe2+, Fe3+, Cl-, NO3-, SO42-, CO32-, PO43-) and possible interfering compounds (used as camouflage agents for explosives; D-(+)-glucose, sweeteners, acetylsalicylic acid (aspirin), household powder detergents, and paracetamol) on the proposed method was demonstrated, proving that the procedure was fairly selective for NQ, due to special hydrogen bonding interactions between UA-functionalized AuNPs and NQ. Finally, the proposed spectrophotometric method was applied to NQ-contaminated soil, and the obtained results were statistically compared with those of the liquid chromatography-tandem mass spectrometric (LC-MS/MS) method in the literature.

Spectrophotometric Fluoride Determination Using St. John's Wort Extract as a Green Chromogenic Complexant for Al(III).

In this study, we applied an innovative approach of green analytical chemistry to develop a novel and eco-friendly chromogenic agent for fluoride determination by making use of the nontoxic Al(III)-flavonoid complex in a natural extract from St. John's wort plant. The initial intensely yellow-colored Al(III)-flavonoid complex formed in the plant extract was converted to a colorless AlF6 3- complex with increasing amounts of fluoride, and color bleaching of the Al-flavonoid chromophore (measured as absorbance decrement) was proportional to fluoride concentration. The developed method gave a linear response within the F- concentration range of 0.11-1.32 mM with the LOD and LOQ values of 0.026 mM (0.5 mg L-1) and 0.079 mM (1.5 mg L-1), respectively. The LOD value for fluoride was below the WHO-permissible limit (1.5 mg L-1) and the US-EPA-enforceable limit (4 mg L-1) in water. The possible interference effects of common anions (Cl-, Br-, I-, NO3 -, HCO3 -, SO4 2-, and PO4 3-) and cations (K+, NH4 +, Ag+, Ca2+, Mg2+, Mn2+, Fe2+, and Fe3+) were investigated; the observed interferences from Fe2+, Fe3+, and PO4 3- were easily eliminated by masking iron with the necessary amount of Na2EDTA without affecting the blank absorbance of the Al(III)-flavonoid complex, precipitating phosphate with Ag(I) salt, and partly neutralizing alkaline water samples to pH 4 with acetic acid. The developed method was applied to real water samples and also validated against a reference spectroscopic method at the 95% confidence level.

Direct Determination of Peroxide Explosives on Polycarbazole/Gold Nanoparticle-Modified Glassy Carbon Sensor Electrodes Imprinted for Molecular Recognition of TATP and HMTD.

Since peroxide-based explosives (PBEs) lack reactive functional groups, they cannot be determined directly by most detection methods and are often detected indirectly by converting them to H2O2. However, H2O2 may originate from many sources, causing false positives in PBE detection. Here, we developed a novel electrochemical sensor for the direct sensitive and selective determination of PBEs such as triacetone triperoxide (TATP) and hexamethylene triperoxide diamine (HMTD) using electrochemical modification of the glassy carbon (GC) electrode with PBE-memory polycarbazole (PCz) films decorated with gold nanoparticles (AuNPs) by cyclic voltammetry (CV). The prepared electrodes were named TATP-memory-GC/PCz/AuNPs (used for TATP determination) and HMTD-memory-GC/PCz/AuNPs (used for HMTD detection). The calibration lines of TATP and HMTD were found in the concentration range of 0.1-1.0 mg L-1 using the net current intensities of differential pulse voltammetry (DPV) versus analyte concentrations. The limit of detection (LOD) commonly found was 15 µg L-1 for TATP and HMTD. The sensor electrodes could separately determine intact TATP and HMTD in the presence of nitro-aromatic, nitramine, and nitrate ester energetic materials. The proposed electrochemical sensing method was not interfered by electroactive substances such as paracetamol, caffeine, acetylsalicylic acid, aspartame, d-glucose, and detergent (containing perborate and percarbonate) used as camouflage materials for PBEs. This is the first molecularly imprinted polymeric electrode for PBEs accomplishing such low LODs, and the DPV method was statistically validated in contaminated clay soil samples against the GC-MS method for TATP and a spectrophotometric method for HMTD using t- and F-tests.

Ionic Liquid-Modified Gold Nanoparticle-Based Colorimetric Sensor for Perchlorate Detection via Anion-π Interaction.

A rapid and convenient nanoparticle(NP)-based colorimetric sensor was developed for determining the propellant oxidant, ammonium perchlorate (AP). The sensing element was manufactured by modifying gold nanoparticles (AuNPs) with [(1-methyl-1H-imidazol-2-yl)sulfanyl]acetic acid, which is an imidazolium-based ionic liquid (IL), to produce the IL@AuNP nanosensor stabilized by polyvinylpyrrolidone. The used IL is an exceptional IL which can attach to AuNPs through the sulfanyl-S atom. The sensing principle was based on observing the red shift in the surface plasmon resonance band of AuNPs leading to NP aggregation as a result of anion-π interaction of perchlorate anion with the zwitterionic form of IL@AuNPs so as to bring opposite charges face-to-face, thereby reducing the overall surface charge of NPs. The surface plasmon resonance band of AuNPs at 540 nm shifted to 700 nm as a result of aggregation. The ratiometric sensing was performed by dividing the absorbance at 700 nm to the absorbance at 540 nm and correlating this ratio to the AP concentration. The limit of detection and limit of quantification of the sensor for AP were 1.50 and 4.95 µM, respectively. Possible interferences of other energetic substances and common soil ions in synthetic mixtures were also investigated to achieve acceptable recoveries of analyte. This work may pioneer similar sensing systems where the overall anionic charges of IL-functionalized AuNPs are exceptionally reduced by an analyte anion (perchlorate), thereby forcing NPs to aggregate.

A novel flow injection amperometric method for sensitive determination of total antioxidant capacity at cupric-neocuproine complex modified MWCNT glassy carbon electrode.

A novel amperometric method is presented for the determination of total antioxidant capacity in flow injection analysis (FIA) system using copper(II)-neocuproine complex modified on Nafion-functionalized multi-walled carbon nanotube-glassy carbon electrode ([Cu(Ncp)22+]/Nf@f-MWCNT/GCE). Cyclic voltammetric studies showed that the modified electrode exhibits a very well-formed reversible redox couple for Cu(II)-/Cu(I)-complex. In addition, the [Cu(Ncp)22+]/[Cu(Ncp)2+] redox pair shows very good electrocatalytic activity towards the oxidation of polyphenolic compounds (PPhCs) such as trolox, catechin, and quercetin due to the enhancement of the anodic peak current of the redox couple in the presence of these analytes. This electrocatalytic oxidation current at the [Cu(Ncp)22+]/Nf@f-MWCNT/GCE was used for flow injection (FI) amperometric determination of PPhCs. FI amperometric-time curves recorded under optimized conditions (applied potential: + 0.6 V vs. Ag/AgCl/KCl(0.10 M), flow rate: 2 mL/min) showed that the proposed electrode had a wide linear range (LR) with a very low detection limit (LOD) for PPhCs. LR and LOD were 0.5-800 and 0.2 µM for trolox, respectively and 0.50-250 and 0.14 µM, respectively, for both quercetin and catechin. This sensitive method was successfully applied to the amperometric measurement of total antioxidant capacity (TAC) of some herbal teas, giving compatible results with the spectrophotometric CUPRAC method. The proposed method gave higher rank to fast-reacting antioxidants; it was equally precise but had a wider linear range and lower LOD than the spectrophotometric CUPRAC assay (e.g., LOD for ascorbic acid and gallic acid were 0.07 and 0.08 µM, respectively), and similar electroanalytical methods using the CUPRAC reagent.

Electrochemical determination of nitroaromatic explosives using glassy carbon/multi walled carbon nanotube/polyethyleneimine electrode coated with gold nanoparticles.

The on site/in field detection of explosives has become a rising priority for homeland security and counter-terrorism measures. This work presents the sensitive detection of nitroaromatic explosives using glassy carbon/multi-walled carbon nanotubes/polyethyleneimine (GC/MWCNTs/PEI) electrode coated with gold nanoparticles (AuNPs). MWCNTs and PEI could be well dispersed in ethanol/water solution, giving rise to a thin and homogeneous film on GCE. The GC/MWCNTs/PEI electrode was electrochemically modified with AuNPs and used for the differential pulse voltammetric (DPV) detection of nitroaromatics. The enhanced detection sensitivities were achieved through π-π and charge-transfer (CT) interactions between the electron-deficient nitroaromatic explosives and donor amine groups in PEI to which gold nanoparticles were linked, providing increased analyte affinity toward the modified GCE. Calibration curves of current intensity versus concentration were linear in the range of 0.05-8 mg L-1 for TNT, 0.2-4 mg L-1 for 2,4-dinitrotoluene (DNT), 1-20 mg L-1 for 2,4-dinitrophenol (2,4-DNP), 0.25-10 mg L-1 for picric acid (PA), and 0.05-4 mg L-1 for 2,4,6-trinitrophenyl-N-methylnitramine (tetryl) with detection limits (LOD) of 15 µg L-1, 45 µg L-1, 135 µg L-1, 30 µg L-1, and 12 µg L-1, respectively. The proposed method was successfully applied to the analysis of nitroaromatics in synthetic explosive mixtures and military composite explosives (comp B and octol). The electrochemical method was not affected by possible interferents of electroactive camouflage materials and common soil ions. Method validation was performed against the reference LC-MS method on TNT and PA-contaminated clay soil samples separately.

Detection of nitric oxide radical and determination of its scavenging activity by antioxidants using spectrophotometric and spectrofluorometric methods.

Although reactive nitrogen species (RNS) may attack biomacromolecules and cause tissue damage when unbalanced by natural antioxidant defenses of the organism, they can also take part in cell signaling under different physiological states and defend against certain pathogens. Since there is a scarcity of analytical methods to detect radicalic NO and its scavengers, a functionalized gold nanoparticle-based spectrophotometric method and a spectrofluorometric method have been separately developed to test antioxidant activity toward scavenging of NO produced from sodium nitroprusside (SNP). The spectrophotometric method involves conversion of NO to nitrite, followed by the formation of an azo dye with 4-aminothiophenol (4-ATP)-modified gold nanoparticles (AuNPs) and N-(1-naphthyl)-ethylene diamine dichloride (NED) and its absorbance measurement at 565 nm. Calibration equations were established by taking the absorbance difference in the presence and absence of antioxidants. In the spectrofluorometric method, the excess of NO radicals, after being scavenged by thiol type antioxidants, caused a decrease in resorcinol fluorescence. The developed spectrophotometric method was applied to orange juice and its trolox equivalent (TE) antioxidant activity was found. By further applying the developed methods to real samples such as bovine serum albumin (BSA), fetal bovine serum (FBS), saliva and certain biomolecules, it is envisaged that these novel methods improving the selectivity of previous methods can be useful in human health and disease research associated with nitric oxide. The developed methods were compared and validated against the conventional Griess assay with Student t-test and F tests.

Direct Electrochemical Determination of Peroxide-Type Explosives Using Well-Dispersed Multi-Walled Carbon Nanotubes/Polyethyleneimine-Modified Glassy Carbon Electrodes.

The sensitive and selective determination of peroxide-based explosives (PBEs) in the field/on site is an important analytical challenge. Most methods claiming to detect PBEs are indirect, actually detecting their decomposition product, H2O2. Here, we present an electrochemical sensor for direct detection of organic peroxide explosives, that is, triacetone triperoxide (TATP) and hexamethylenetriperoxide diamine (HMTD), using well-dispersed multiwalled carbon nanotubes/polyethyleneimine (MWCNTs/PEI)-modified glassy carbon (GC) electrode, namely, GC/MWCNTs/PEI electrode. This is the first use of the conductive polyelectrolyte PEI as an electrode modifier for pristine PBE sensing. The potential range, scan rate, solvent selection, and supporting electrolyte concentration were optimized for PBEs. As a distinct advantage over other similar methods, our sensor electrode responded to intact TATP solutions in neutral medium, meaning that TATP did not interact with acids/bases that would transform it into H2O2. Calibration curves were linear in the range of 10-200 mg L-1 for TATP and 25-200 mg L-1 for HMTD. Using differential pulse voltammetry, detection limits of 1.5 mg L-1 TATP and 3.0 mg L-1 HMTD were obtained from direct electrochemical reduction in 80/20% (v/v) H2O-acetone solvent medium. Electroactive camouflage materials such as passenger belongings (e.g., sweetener, detergent, sugar, and paracetamol-caffeine-based analgesic drugs), common ions, and other explosives were shown not to interfere with the proposed method. The nonresponsive behavior of our electrode to H2O2 prevents "false positives" from other peroxide materials of everyday use. This electrochemical sensor could also detect other nitro-explosives at different potentials and was statistically validated against standard GC-MS and spectrophotometric methods.

Ethylenediamine-bound magnetite nanoparticles as dual function colorimetric sensor having charge transfer and nanozyme activity for TNT and tetryl detection.

A reusable, low-cost, and convenient ethylenediamine (EDA)-bound magnetite nanoparticles (MNPs)-based colorimetric sensor has been developed for dual function colorimetric determination of nitroaromatic explosives such as TNT and tetryl. Colorimetric detection of analytes may occur through two independent routes: (1) nano-Fe3O4- EDA- NH2 as σ-donor may interact with the σ- and π-acceptor aromatic-poly(NO2) groups to produce a colored charge-transfer (CT) complex; (2) nano-Fe3O4-EDA-NH2 as a Fenton-type nanozyme may generate reactive species that comprise hydroxyl radicals (•OH) with H2O2 to oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to a blue-colored diimine (oxTMB-TMB) CT complex, where this color is bleached with TNT/tetryl because of donor-acceptor interactions between the explosive -NO2 groups and the -NH2 group of Fe3O4-EDA nanoparticles of restricted nanozyme activity. Both methods can quantify TNT well below the EPA recommended TNT residential screening level in soil, LOD being in the micromolar range. As EDA was covalently bound to MNPs, the same sensor can be separately reused six times for TNT and eight times for tetryl determination, using method (1). Common metal ions, anions, energetic materials, several camouflage materials, and soil components such as humates did not interfere with the nanosensor performance for TNT and tetryl. The combination of charge-transfer and nanozyme ability of Fe3O4- EDA-NH2 nanoparticles may bring a new approach to dual function colorimetric sensor design. To the best of our knowledge, this is the first dual function colorimetric sensor for TNT and tetryl using the same nanoparticles as sensing elements in two different detection systems involving either formation or bleaching of colored species. The proposed colorimetric sensor can determine nitroaromatic explosives in two different ways: method-1 for TNT and tetryl sensing with EDA-MNPs relies on the donor-acceptor interaction between the electron-deficient nitroaromatics and electron-rich amine groups covalently functionalized on MNPs to produce an absorbance at 512 nm. In method-2, EDA-MNPs having nanozyme activity react with H2O2 to form reactive species that can oxidize TMB to its blue-colored charge-transfer (CT) complex, where TNT and tetryl addition may partially inhibit the nanozyme activity of EDA-MNPs and cause color bleaching (decrement of 650 nm absorbance) by disrupting the CT complex formed from TMB. This is the first dual function colorimetric sensor for nitro explosives uniquely combining charge-transfer and nanozyme ability of EDA-Fe3O4 nanoparticles in the same nano-sensor.

Development of a gold nanoparticles-based colorimetric sensor for the indirect determination of ammonium dinitramide and tetryl.

Ammonium dinitramide (ADN) is a strong, environmentally friendly oxidizer used in composite solid rocket propellants. As there is no reliable colorimetric sensor for ADN assay applicable to in-field screening, we developed a sensitive and practical sensing method to determine it in the presence of other explosives and possible interferents, based on the detection of nitrite formed from ADN degradation under UV light in a slightly alkaline (i.e. of lower alkalinity than needed to hydrolyze nitramines) solution by a nanoparticle-based colorimetric sensor. The ADN-derived nitrite formed a colored product via a Griess reaction using gold nanoparticles modified with 4-aminothiophenol (4-ATP-AuNPs) along with a coupling reagent N-(1-naphthyl)ethylene diamine (NED) for forming an azo dye. The method used for ADN detection could also be applied to tetryl samples at a different wavelength. The limit of detection (LOD) was 0.012 mg L-1 for ADN and 0.615 mg L-1 for tetryl. Interference effects of energetic materials like trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and pentaerythritol tetranitrate (PETN) to ADN determination could be overcome. In addition, common soil ions did not adversely affect the nanosensor performance. The developed method was statistically validated against reference voltammetric, UV, and HPLC methods using t- and F- tests.

Colorimetric sensors and nanoprobes for characterizing antioxidant and energetic substances.

The development of analytical techniques for antioxidant compounds is important, because antioxidants that can inactivate reactive species and radicals are health-beneficial compounds, also used in the preservation of food and protection of almost every kind of organic substance from oxidation. Energetic substances include explosives, pyrotechnics, propellants and fuels, and their determination at bulk/trace levels is important for the safety and well-being of modern societies exposed to various security threats. Most of the time, in field/on site detection of these important analytes necessitates the use of colorimetric sensors and probes enabling naked-eye detection, or low-cost and easy-to-use fluorometric sensors. The use of nanosensors brings important advantages to this field of analytical chemistry due to their various physico-chemical advantages of increased surface area, surface plasmon resonance absorption of noble metal nanoparticles, and superior enzyme-mimic catalytic properties. Thus, this critical review focuses on the design strategies for colorimetric sensors and nanoprobes in characterizing antioxidant and energetic substances. In this regard, the main themes and properties in optical sensor design are defined and classified. Nanomaterial-based optical sensors/probes are discussed with respect to their mechanisms of operation, namely formation and growth of noble metal nanoparticles, their aggregation and disaggregation, displacement of active constituents by complexation or electrostatic interaction, miscellaneous mechanisms, and the choice of metallic oxide nanoparticles taking part in such formulations.

A colorimetric probe based on 4-mercaptophenol and thioglycolic acid-functionalized gold nanoparticles for determination of phytic acid and Fe(III) ions.

As a first of its kind, we developed a highly sensitive colorimetric nanoprobe for phytic acid (PA) and Fe(III) ion detection based on 4-mercaptophenol (4MP) and thioglycolic acid (TGA)-functionalized gold nanoparticles {AuNPs@(4MP-TGA)}. AuNPs were easily derivatized by 4MP and TGA through -SH binding to gold. Fe(III) ions possibly are bound first to the phenolate groups of 4MP-AuNPs, and further coordinated several nanoparticles via the carboxylate groups of TGA-AuNPs to cause aggregation, resulting in a red-to-purple color change and a bathochromic shift in the SPR absorption band of the nanoprobe. With the addition of PA to the AuNPs@(4MP-TGA)-Fe(III) system, the aggregated particles were released due to strong complex formation between Fe(III) and PA, resulting in a restoration of the color (purple-to-red) and of the SPR band to the original 520 nm wavelength maximum. Thus, the 650-nm absorption is attenuated and the 520-nm band is enhanced upon PA-Fe(III) chelation. This means that the absorption ratio A650/A520 is an indication of Fe(III) whereas the reverse ratio A520/A650 of the PA content of complex samples. The limits of detection (LOD) of the AuNPs@(4MP-TGA) were 1.0 µM for Fe(III) ions and 0.15 µM for PA. Phytic acid extracted from bean grains was determined with the proposed probe, yielding good recoveries. In addition, common metal ions, anions, and several biomolecules did not show an adverse effect on the nanoprobe performance for ferric ions and phytate. The developed method was statistically validated against a LC-MS/MS literature method. Graphical abstract Mercaptophenolate (4MP)- and thioglycolic acid (TGA)-functionalized gold nanoparticles were prepared as nanoprobes to detect Fe(III) ions through nanoparticle aggregation accompanied by red-to-purple color shift. The same nanoprobe determined phytic acid in food through disaggregation of Fe(III)-aggregated nanoparticles by strong Fe(III)-phytate chelation and restoration of solution color from purple to red.

Determination of total antioxidant capacity of Cynara Scolymus L. (globe artichoke) by using novel nanoparticle-based ferricyanide/Prussian blue assay.

A novel ferricyanide/Prussian blue (PB) assay for total antioxidant capacity (TAC) determination was developed exploiting the formation of PB nanoparticles in the presence of polyvinylpyrrolidone (PVP) as stabilizer. This improved method, named as "nanoparticle-based ferricyanide/Prussian blue assay (PBNP)", was applied to the TAC measurement of Cynara Scolymus L. (globe artichoke). The calibration results of the novel (PBNP) method were compared with those of a similar nanoparticle PB method performed in the absence of PVP, and of a sodium dodecyl sulfate-modified and acid-optimized ferricyanide reference assay. Compared to similar common Fe(III)-based TAC assays, much higher molar absorptivities, pointing out higher response to different kinds of antioxidants, were obtained with PBNP for all tested antioxidants, and lower LOD and LOQ values were achieved for thiols. As an additional advantage, methionine, not responding to other electron-transfer based TAC reagents, could be measured. PBNP could detect various antioxidants with one-two orders-of-magnitude lower LOD values than those of widely used TAC assays like CUPRAC and Folin-Ciocalteau well correlating with the proposed assay.

Colorimetric sensing of ammonium perchlorate using methylene Blue-Modified gold nanoparticles.

This work aims to develop a sensitive and easily applicable gold nanoparticles (AuNPs)-based colorimetric sensor for determining the propellant ammonium perchlorate (AP) in the presence of other explosives and interferents. The sensor relied on attaching methylene blue (MB), a phenothiazine dye with a planar structure, onto negatively charged AuNPs, and exploited the dye's electrostatic interactions with the large oxyanion, perchlorate. Ion-pair formation between MB@AuNP nanocomposite and AP led to nanoparticle aggregation, causing a red shift in the surface plasmon resonance (SPR) band of AuNPs. This new peak emerged at around 650 nm, giving rise to the development of a ratiometric sensor by taking the ratio of 650 nm absorbance to that at 520 nm (pertaining to nanocomposite) and correlating this ratio to AP concentration. The limit of detection (LOD) and limit of quantification (LOQ) of the sensor for AP were 2.4 × 10-5 and 8.3 × 10-5 mol L-1, respectively. The recovery of AP from ternary mixtures containing TNT and HMX was accomplished by water extraction using solubility differences. The interferences of common soil ions such as Cl-, NO3-, NO2-, SO42-, CH3COO-, K+, Mg2+ and Ca2+ were investigated, and the assay was statistically compared (using t- and F- tests) against a reference method. The proposed method could accurately determine perchlorate in a sparkler sample.

Silver Nanoparticle Formation-Based Colorimetric Determination of Reducing Sugars in Food Extracts via Tollens' Reagent.

A simple, sensitive, and nonenzymatic nanospectrophotometric method was developed for the determination of reducing sugars. The silver mirror reaction-assisted method is based on the in situ formation of silver nanoparticles in the presence of reducing sugars. All simple reducing sugars (glucose, galactose, fructose, mannose, maltose, and lactose) examined had perfectly linear regression equations. The detection limit for glucose was 40 nM. The proposed method could be selectively applied to various synthetic mixtures of reducing sugars with polyphenolic compounds, and to honey, milk, and commercial fruit juice as real samples using solid phase extraction as a clean-up process. The developed method was also statistically validated against conventional alkaline CUPRAC (cupric-neocuproine, Cu(II)-Nc) spectrophotometric method using Student's t- and F-tests.

Titanium dioxide nanoparticles-based colorimetric sensors for determination of hydrogen peroxide and triacetone triperoxide (TATP).

Due to its relatively simple preparation and readily available precursors, determination of triacetone triperoxide (TATP) by portable devices has become important. In this work, two different titanium dioxide nanoparticles (TiO2NPs)-based colorimetric sensors based on complex formation on the solid surface were developed for determination of H2O2 and TATP. The first sensor, (3-aminopropyl)triethoxysilane (APTES) modified-TiO2NPs-based paper sensor (APTES@TiO2NPs), exploits peroxo-titanate binary complex formation between APTES@TiO2NPs and H2O2 on chromatographic paper. The second sensor, 4-(2-pyridylazo)-resorcinol-modified-TiO2NPs-based solid sensor (PAR@TiO2NPs), relies on the formation of a ternary complex between Ti(IV), PAR and H2O2. The developed sensors were also applied to TATP determination after acidic hydrolysis of samples to H2O2. The limits of detection (LODs) of APTES@TiO2NPs-based paper sensor were 3.14 × 10-4 and 5.13 × 10-4 mol L-1 for H2O2 and TATP, respectively, whereas the LODs of PAR@TiO2NPs solid sensor were 6.06 × 10-7 and 3.54 × 10-7 mol L-1 for H2O2 and TATP, respectively. Possible interferences of common soil ions, passenger belongings used as camouflage materials during public transport (e.g., detergent, sweetener, acetylsalicylic acid and paracetamol-caffeine based analgesic drugs) and of other explosives were examined. The developed methods were statistically validated using t- and F- tests against the titanyl sulfate (TiOSO4) colorimetric literature method.