Medical Care as Flea Market Bargaining? An International Interdisciplinary Study of Varieties of Shared Decision Making in Physician-Patient Interactions.

Phenomenon: Shared decision making (SDM) is a core ideal in the interaction between healthcare providers and patients, but the implementation of the SDM ideal in clinical routines has been a relatively slow process. Approach: In a sociological study, 71 interactions between physicians and simulated patients enacting chronic heart failure were video-recorded in China, Germany, the Netherlands, and Turkey as part of a quasi-experimental research design. Participating physicians varied in specialty and level of experience. The secondary analysis presented in this article used content analysis to study core components of SDM in all of the 71 interactions and a grounded theory approach to observe how physicians responded actively to patients even though they did not actively employ the SDM ideal. Findings: Full realization of the SDM ideal remains an exception, but various aspects of SDM in physician-patient interaction were observed in all four locations. Analyses of longer interactions show dynamic processes of interaction that sometimes surprised both patient and physician. We observed varieties of SDM that differ from the SDM ideal but arguably achieve what the SDM ideal is intended to achieve. Our analysis suggests a need to revisit the SDM ideal-to consider whether varieties of SDM may be acceptable, even valuable, in their own right. Insights: The gap between the SDM ideal and SDM as implemented in clinical practice may in part be explained by the tendency of medicine to define and teach SDM through a narrow lens of checklist evaluations. The authors support the argument that SDM defies a checklist approach. SDM is not uniform, but nuanced, dependent on circumstances and setting. As SDM is co-produced by patients and physicians in a dynamic process of interaction, medical researchers should consider and medical learners should be exposed to varieties of SDM-related practice rather than a single idealized model. Observing and discussing worked examples contributes to the physician's development of realistic expectations and personal professional growth.

Wearable near-infrared spectroscopy: reliability and sensitivity among different endurance cycling exercise intensities

The present study investigated the reliability and sensitivity of a wearable near-infrared spectroscopy (wNIRS) device in moderate and heavy exercise intensity domains. On three separate days, eleven males performed an incremental test to exhaustion, and in the following visits, four submaximal constant-load bouts (i.e., test and retest) were performed in the moderate-intensity domain (100 and 130 W) and heavy-intensity domain (160 and 190 W). The local tissue oxygen saturation index (SmO2) and pulmonary oxygen uptake (V̇O2) were measured continuously. The absolute SmO2 and V̇O2 values and the change (Δ) from the 3rd to 6th min of exercise were calculated. There was good reliability for SmO2 measurements, as indicated by the high intraclass correlation coefficient analysis (ICC ≥0.84 for all) and low coefficient of variation between the two trials (CV ≤4.1% for all). Steady-state responses were observed for SmO2 and V̇O2 from the 3rd to the 6th min in the two moderate-intensity bouts (P>0.05), whereas SmO2 decreased and V̇O2 increased from the 3rd to the 6th min in the two heavy-intensity bouts (P<0.05). Together, these findings suggested that the SmO2 measured with a wNIRS device is reliable and sensitive to track local metabolic changes provoked by slight increments in exercise intensity.

Neuropilin-1 regulates renin synthesis in juxtaglomerular cells.

Renin is the key enzyme of the systemic renin-angiotensin-aldosterone system, which plays an essential role in regulating blood pressure and maintaining electrolyte and extracellular volume homeostasis. Renin is mainly produced and secreted by specialized juxtaglomerular (JG) cells in the kidney. In the present study, we report for the first time that the conserved transmembrane receptor neuropilin-1 (NRP1) participates in the development of JG cells and plays a key role in renin production. We used the myelin protein zero-Cre (P0-Cre) to abrogate Nrp1 constitutively in P0-Cre lineage-labelled cells of the kidney. We found that the P0-Cre precursor cells differentiate into renin-producing JG cells. We employed a lineage-tracing strategy combined with RNAscope quantification and metabolic studies to reveal a cell-autonomous role for NRP1 in JG cell function. Nrp1-deficient animals displayed abnormal levels of tissue renin expression and failed to adapt properly to a homeostatic challenge to sodium balance. These findings provide new insights into cell fate decisions and cellular plasticity operating in P0-Cre-expressing precursors and identify NRP1 as a novel key regulator of JG cell maturation. KEY POINTS: Renin is a centrepiece of the renin-angiotensin-aldosterone system and is produced by specialized juxtaglomerular cells (JG) of the kidney. Neuropilin-1 (NRP1) is a conserved membrane-bound receptor that regulates vascular and neuronal development, cancer aggressiveness and fibrosis progression. We used conditional mutagenesis and lineage tracing to show that NRP1 is expressed in JG cells where it regulates their function. Cell-specific Nrp1 knockout mice present with renin paucity in JG cells and struggle to adapt to a homeostatic challenge to sodium balance. The results support the versatility of renin-producing cells in the kidney and may open new avenues for therapeutic approaches.

The evaluation of nasolacrimal duct injury in Le Fort I osteotomy patients.

BACKGROUND: Although Le Fort I surgeries are safe and successful procedures; nasolacrimal duct injuries may be observed due to these surgeries. The study aimed to investigate the prevalence of nasolacrimal duct injury in Le Fort I osteotomy patients. MATERIAL AND METHODS: The authors conducted a retrospective cohort study consisting of patients who underwent Le Fort I osteotomies between 2017 and 2021 in the Erciyes University Faculty of Dentistry. The primary predictor variables were the distance of the nasolacrimal canal to the outer cortex of the maxilla and the nasal floor, as well as the superior-inferior level of the superiorly positioned screw inserted in the maxilla aperture region relative to the nasolacrimal canal. The outcome variable was the presence of a nasolacrimal duct injury. Mann Whitney U test was used for quantitative variables between the two groups. A Pearson chi-squared analysis was used to compare categorical data. A p-value <0.05 was considered statistically significant. RESULTS: A total of 290 nasolacrimal canals were evaluated in 145 patients, 87 females, and 58 males. The mean age was 23.47± 6.67. There was a statistically significant relationship between screw level and nasolacrimal canal perforation (p<0,001). The distance between the most anterior border of the nasolacrimal canal and the outer cortical of the maxilla was significantly less in the perforation group (p<0,001). The fixation screw was significantly closer to the nasolacrimal canal in the perforation group (p<0,001). CONCLUSIONS: In Le Fort I surgery, nasolacrimal duct injury may occur during screw fixation to the aperture region. Superiorly positioned fixation screws in the aperture region may damage the nasolacrimal canal. In patients where the nasolacrimal canal is close to the outer cortex, care should be taken when applying the fixation screws to the aperture region to avoid damaging the canal.

Quantitative fetal MRI with diffusion tensor imaging in cases with 'short' corpus callosum.

OBJECTIVES: It has been suggested previously that the presence of Probst bundles (PB) in cases with a short corpus callosum (SCC) on diffusion tensor imaging (DTI) may help to differentiate between corpus callosal (CC) dysplasia and a variant of normal CC development. The objectives of this study were to compare DTI parameters between cases of SCC vs normal CC and between cases of SCC with PB (SCC-PB+) vs SCC without PB (SCC-PB-). METHODS: This was a retrospective study of patients referred to the Necker Hospital in Paris, France, for magnetic resonance imaging (MRI) evaluation of an apparently isolated SCC detected by sonography between November 2016 and December 2022 (IRB: 00011928). MRI was performed using a 1.5-Tesla Signa system. T2-weighted axial and sagittal sequences of the fetal brain were used to measure the length and thickness of the CC. 16-direction DTI axial brain sequences were performed to identify the presence of PB and to generate quantitative imaging parameters (fractional anisotropy (FA) and apparent diffusion coefficient (ADC)) of the entire CC, genu, body and splenium. Cases in which other associated brain abnormalities were detected on MRI were excluded. Cases were matched for fetal gender and gestational age with controls in a 1:3 ratio. Control cases were normal fetuses included in the LUMIERE on the FETUS trial (NCT04142606) that underwent the same DTI evaluation of the brain. Comparisons between SCC and normal CC cases, and between SCC-PB+ and SCC-PB- cases were performed using ANOVA and adjusted for potential confounders using ANCOVA. RESULTS: Twenty-two SCC cases were included and compared with 66 fetuses with a normal CC. In 10/22 (45.5%) cases of SCC, PB were identified. As expected, dimensions of the CC were significantly smaller in SCC compared with normal CC cases (all P < 0.01). In SCC-PB+ vs SCC-PB- cases, FA values were significantly lower in the entire CC (median, 0.21 (range, 0.19-0.24) vs 0.24 (range, 0.22-0.28); P < 0.01), genu (median, 0.21 (range, 0.15-0.29) vs 0.24 (range, 0.17-0.29); P = 0.04), body (median, 0.21 (range, 0.18-0.23) vs 0.23 (range, 0.21-0.27); P = 0.04) and splenium (median, 0.22 (range, 0.16-0.30) vs 0.25 (range, 0.20-0.29); P = 0.03). ADC values were significantly higher in the entire CC, genu and body in SCC-PB+ vs SCC-PB- cases (all P < 0.05). In SCC-PB+ cases, all FA values were significantly lower, and ADC values in the CC body were significantly higher compared with normal CC cases (all P < 0.05). In SCC-PB- cases, there was no significant difference in FA and ADC compared with normal CC cases (all P > 0.05). CONCLUSIONS: Fetal DTI evaluation of the CC showed that FA values were significantly lower and ADC values tended to be significantly higher in SCC-PB+ compared with normal CC cases. This may highlight alterations of the white matter microstructure in SCC-PB+. In contrast, isolated SCC-PB- did not demonstrate significant changes in DTI parameters, strengthening the possibility that this is a normal CC variant. © 2023 International Society of Ultrasound in Obstetrics and Gynecology.

Which method is successful in closure of acute oroantral communication? A retrospective study.

BACKGROUND: This study's purpose is to retrospectively evaluate the success of surgical methods used in treating Oroantral Communication (OAC). MATERIAL AND METHODS: This study was designed as a retrospective cohort study on patients who developed OAC after surgery maxillary posterior region. The records of patients previously treated with OAC were scanned through the hospital registry software. A data set was created by recording patients' age, gender, systemic disease, etiological reasons, and surgical methods. The primary predictor variable was the surgical method used to treat OAC. Other variables were age, gender, systemic disease and etiological reasons. The primary outcome was oroantral fistula development after the first surgical intervention. The patients who were positive in clinical examination and Valsalva test on control days were considered unsuccessful. One-way analysis of variance and Kruskal-Wallis tests were used for quantitative variables in more than two groups. Pearson chi-square test was used to compare categorical data. RESULTS: This retrospective cohort study was completed with 605 patients who met the study criteria among 95,883 patients who underwent surgery in the maxillary posterior region. The incidence of OAC was 0.63%. The patients consisted of 238 female and 367 male patients. The mean age was 41.06±14.48 years. Buccal flap and Buccal Fat Pad methods were used most frequently in the treatment. While treatment was completed with the first surgical intervention in 592 (97.85%) patients, OAF developed in 13 (2.15%) patients. No statistically significant relation existed between surgical technique and OAF development (p>0.005). The success rate of the Buccal Flap method was 98.7%, and the Buccal Fat Pad method was 95.8%. CONCLUSIONS: The results of this study showed that noninvasive methods in openings smaller than 5 mm and surgical treatment methods in openings larger than 5 mm have a high success rate with the limitations of present study.

Visible light photoreforming of greenhouse gases by nano Cu-Al LDH intercalated with urea-derived anions.

The accumulation of anthropogenic greenhouse gases (GHGs) in the atmosphere causes global warming. Global efforts are carried out to prevent temperature overshooting and limit the increase in the Earth's surface temperature to 1.5 °C. Carbon dioxide and methane are the largest contributors to global warming. We have synthesized copper-aluminium layered double hydroxide (Cu-Al LDH) catalysts by urea hydrolysis under microwave (MW) irradiation. The effect of MW power, urea concentration, and MII/MIII ratios was studied. The physicochemical properties of the prepared LDH catalysts were characterized by several analysis techniques. The results confirmed the formation of the layered structure with the intercalation of urea-derived anions. The urea-derived anions enhanced the optical and photocatalytic properties of the nano Cu-Al LDH in the visible-light region. The photocatalytic activity of the prepared Cu-Al LDH catalysts was tested for greenhouse gas conversion (CH4, CO2, and H2O) under visible light. The dynamic gas mixture flow can pass through the reactor at room temperature under atmospheric pressure. The results show a high conversion percentage for both CO2 and CH4. The highest converted amounts were 7.48 and 1.02 mmol mL-1 g-1 for CH4 and CO2, respectively, under the reaction conditions. The main product was formaldehyde with high selectivity (>99%). The results also show the stability of the catalysts over several cycles. The current work represents a green chemistry approach for efficient photocatalyst synthesis, visible light utilization, and GHGs' conversion into a valuable product.

Views about perceived training needs of health care professionals in relation to socially assistive robots: an international online survey.

BACKGROUND: As Artificial Intelligence and social robots are increasingly used in health and social care, it is imperative to explore the training needs of the workforce, factoring in their cultural background. OBJECTIVES: Explore views on perceived training needs among professionals around the world and how these related to country cultures. DESIGN: Cross-sectional, descriptive, mixed-methods international online survey. METHODS: Descriptive statistical analysis explored the ranking across countries and relationships with three Hofstede cultural dimensions. Thematic analysis was conducted on the open-ended text responses. RESULTS: A sample of N = 1284 participants from eighteen countries. Knowing the capabilities of the robots was ranked as the top training need across all participating countries and this was also reflected in the thematic analysis. Participants' culture, expressed through three Hofstede's dimensions, revealed statistically significant ranking differences. CONCLUSIONS: Future research should further explore other factors such as the level of digital maturity of the workplace. IMPACT STATEMENT: Training needs of health and social care staff to use robotics are fast growing and preparation should factor in patient safety and be based on the principles of person- and culture-centred care.

The association between fingolimod and mental health outcomes in a cohort of Multiple Sclerosis patients with stress.

OBJECTIVE: The primary objective was to study the association between fingolimod and the frequency of depression, anxiety, and insomnia symptoms among a cohort of Multiple Sclerosis (MS) patients with stress. The secondary objective was to examine the association between patient characteristics and these psychiatric symptoms. PATIENTS AND METHODS: Patients with MS and stress were recruited according to the Arabic version of the Perceived Stress Scale (PSS). Psychiatric outcomes were measured by validated scales. Logistic regression was used to estimate adjusted odds ratios (aORs) with 95% confidence intervals (CIs). Data from 324 participants were analyzed. RESULTS: Fingolimod was associated with a significantly lower adjusted odds ratio for depression (aOR 0.58, 95% CI 0.35-0.97, p<0.05) but less associated with anxiety (aOR 0.63, 95% CI 0.35-1.01, p=0.05) and insomnia (aOR 0.88, 95% CI 0.52-1.51, p=0.64). CONCLUSIONS: Close monitoring of mental health is required for patients with MS using disease-modifying therapies.

Carbon disulfide removal from gasoline fraction using zinc-carbon composite synthesized using microwave-assisted homogenous precipitation.

Carbon disulfide (CS2) is one of the sulfur components that are naturally present in petroleum fractions. Its presence causes corrosion issues in the fuel facilities and deactivates the catalysts in the petrochemical processes. It is a hazardous component that negatively impacts the environment and public health due to its toxicity. This study used zinc-carbon (ZC) composite as a CS2 adsorbent from the gasoline fraction model component. The carbon is derived from date stone biomass. The ZC composite was prepared via a homogenous precipitation process by urea hydrolysis. The physicochemical properties of the prepared adsorbent are characterized using different techniques. The results confirm the loading of zinc oxide/hydroxide carbonate and urea-derived species on the carbon surface. The results were compared by the parent samples, raw carbon, and zinc hydroxide prepared by conventional and homogeneous precipitation. The CS2 adsorption process was performed using a batch system at atmospheric pressure. The effects of adsorbent dosage and adsorption temperatures have been examined. The results indicate that ZC has the highest CS2 adsorption capacity (124.3 mg.g-1 at 30 °C) compared to the parent adsorbents and the previously reported data. The kinetics and thermodynamic calculation results indicate the spontaneity and feasibility of the CS2 adsorption process.