ABSTRACT
This study proposes a procedure for substantive dimensionality estimation in the presence of wording effects, the inconsistent response to regular and reversed self-report items. The procedure developed consists of subtracting an approximate estimate of the wording effects variance from the sample correlation matrix and then estimating the substantive dimensionality on the residual correlation matrix. This is achieved by estimating a random intercept factor with unit loadings for all the regular and unrecoded reversed items. The accuracy of the procedure was evaluated through an extensive simulation study that manipulated nine relevant variables and employed the exploratory graph analysis (EGA) and parallel analysis (PA) retention methods. The results indicated that combining the proposed procedure with EGA or PA achieved high accuracy in estimating the substantive latent dimensionality, but that EGA was superior. Additionally, the present findings shed light on the complex ways that wording effects impact the dimensionality estimates when the response bias in the data is ignored. A tutorial on substantive dimensionality estimation with the R package EGAnet is offered, as well as practical guidelines for applied researchers.
Subject(s)
Psychometrics , Psychometrics/methods , Humans , Factor Analysis, Statistical , Self Report , Models, Statistical , Computer Simulation , Data Interpretation, StatisticalABSTRACT
Introduction: SARS-CoV-2 viral load has been related to COVID-19 severity. The main aim of this study was to evaluate the relationship between SARS-CoV-2 viremia and SNPs in genes previously studied by our group as predictors of COVID-19 severity. Materials and methods: Retrospective observational study including 340 patients hospitalized for COVID-19 in the University Hospital La Princesa between March 2020 and December 2021, with at least one viremia determination. Positive viremia was considered when viral load was above the quantifiable threshold (20 copies/ml). A total of 38 SNPs were genotyped. To study their association with viremia a multivariate logistic regression was performed. Results: The mean age of the studied population was 64.5 years (SD 16.6), 60.9% patients were male and 79.4% white non-Hispanic. Only 126 patients (37.1%) had at least one positive viremia. After adjustment by confounders, the presence of the minor alleles of rs2071746 (HMOX1; T/T genotype OR 9.9 p < 0.0001), rs78958998 (probably associated with SERPING1 expression; A/T genotype OR 2.3, p = 0.04 and T/T genotype OR 12.9, p < 0.0001), and rs713400 (eQTL for TMPRSS2; C/T + T/T genotype OR 1.86, p = 0.10) were associated with higher risk of viremia, whereas the minor alleles of rs11052877 (CD69; A/G genotype OR 0.5, p = 0.04 and G/G genotype OR 0.3, p = 0.01), rs2660 (OAS1; A/G genotype OR 0.6, p = 0.08), rs896 (VIPR1; T/T genotype OR 0.4, p = 0.02) and rs33980500 (TRAF3IP2; C/T + T/T genotype OR 0.3, p = 0.01) were associated with lower risk of viremia. Conclusion: Genetic variants in HMOX1 (rs2071746), SERPING1 (rs78958998), TMPRSS2 (rs713400), CD69 (rs11052877), TRAF3IP2 (rs33980500), OAS1 (rs2660) and VIPR1 (rs896) could explain heterogeneity in SARS-CoV-2 viremia in our population.
ABSTRACT
The accuracy of factor retention methods for structures with one or more general factors, like the ones typically encountered in fields like intelligence, personality, and psychopathology, has often been overlooked in dimensionality research. To address this issue, we compared the performance of several factor retention methods in this context, including a network psychometrics approach developed in this study. For estimating the number of group factors, these methods were the Kaiser criterion, empirical Kaiser criterion, parallel analysis with principal components (PAPCA) or principal axis, and exploratory graph analysis with Louvain clustering (EGALV). We then estimated the number of general factors using the factor scores of the first-order solution suggested by the best two methods, yielding a "second-order" version of PAPCA (PAPCA-FS) and EGALV (EGALV-FS). Additionally, we examined the direct multilevel solution provided by EGALV. All the methods were evaluated in an extensive simulation manipulating nine variables of interest, including population error. The results indicated that EGALV and PAPCA displayed the best overall performance in retrieving the true number of group factors, the former being more sensitive to high cross-loadings, and the latter to weak group factors and small samples. Regarding the estimation of the number of general factors, both PAPCA-FS and EGALV-FS showed a close to perfect accuracy across all the conditions, while EGALV was inaccurate. The methods based on EGA were robust to the conditions most likely to be encountered in practice. Therefore, we highlight the particular usefulness of EGALV (group factors) and EGALV-FS (general factors) for assessing bifactor structures with multiple general factors. (PsycInfo Database Record (c) 2023 APA, all rights reserved).
ABSTRACT
The number of available factor analytic techniques has been increasing in the last decades. However, the lack of clear guidelines and exhaustive comparison studies between the techniques might hinder that these valuable methodological advances make their way to applied research. The present paper evaluates the performance of confirmatory factor analysis (CFA), CFA with sequential model modification using modification indices and the Saris procedure, exploratory factor analysis (EFA) with different rotation procedures (Geomin, target, and objectively refined target matrix), Bayesian structural equation modeling (BSEM), and a new set of procedures that, after fitting an unrestrictive model (i.e., EFA, BSEM), identify and retain only the relevant loadings to provide a parsimonious CFA solution (ECFA, BCFA). By means of an exhaustive Monte Carlo simulation study and a real data illustration, it is shown that CFA and BSEM are overly stiff and, consequently, do not appropriately recover the structure of slightly misspecified models. EFA usually provides the most accurate parameter estimates, although the rotation procedure choice is of major importance, especially depending on whether the latent factors are correlated or not. Finally, ECFA might be a sound option whenever an a priori structure cannot be hypothesized and the latent factors are correlated. Moreover, it is shown that the pattern of the results of a factor analytic technique can be somehow predicted based on its positioning in the confirmatory-exploratory continuum. Applied recommendations are given for the selection of the most appropriate technique under different representative scenarios by means of a detailed flowchart. (PsycInfo Database Record (c) 2023 APA, all rights reserved).
ABSTRACT
Exploratory bi-factor analysis (EBFA) is a very popular approach to estimate models where specific factors are concomitant to a single, general dimension. However, the models typically encountered in fields like personality, intelligence, and psychopathology involve more than one general factor. To address this circumstance, we developed an algorithm (GSLiD) based on partially specified targets to perform exploratory bi-factor analysis with multiple general factors (EBFA-MGF). In EBFA-MGF, researchers do not need to conduct independent bi-factor analyses anymore because several bi-factor models are estimated simultaneously in an exploratory manner, guarding against biased estimates and model misspecification errors due to unexpected cross-loadings and factor correlations. The results from an exhaustive Monte Carlo simulation manipulating nine variables of interest suggested that GSLiD outperforms the Schmid-Leiman approximation and is robust to challenging conditions involving cross-loadings and pure items of the general factors. Thereby, we supply an R package (bifactor) to make EBFA-MGF readily available for substantive research. Finally, we use GSLiD to assess the hierarchical structure of a reduced version of the Personality Inventory for DSM-5 Short Form (PID-5-SF).
Subject(s)
Algorithms , Calcium Channels , Computer Simulation , Factor Analysis, Statistical , Monte Carlo Method , PsychometricsABSTRACT
Multidimensional forced-choice (FC) questionnaires have been consistently found to reduce the effects of socially desirable responding and faking in noncognitive assessments. Although FC has been considered problematic for providing ipsative scores under the classical test theory, item response theory (IRT) models enable the estimation of nonipsative scores from FC responses. However, while some authors indicate that blocks composed of opposite-keyed items are necessary to retrieve normative scores, others suggest that these blocks may be less robust to faking, thus impairing the assessment validity. Accordingly, this article presents a simulation study to investigate whether it is possible to retrieve normative scores using only positively keyed items in pairwise FC computerized adaptive testing (CAT). Specifically, a simulation study addressed the effect of (a) different bank assembly (with a randomly assembled bank, an optimally assembled bank, and blocks assembled on-the-fly considering every possible pair of items), and (b) block selection rules (i.e., T, and Bayesian D and A-rules) over the estimate accuracy and ipsativity and overlap rates. Moreover, different questionnaire lengths (30 and 60) and trait structures (independent or positively correlated) were studied, and a nonadaptive questionnaire was included as baseline in each condition. In general, very good trait estimates were retrieved, despite using only positively keyed items. Although the best trait accuracy and lowest ipsativity were found using the Bayesian A-rule with questionnaires assembled on-the-fly, the T-rule under this method led to the worst results. This points out to the importance of considering both aspects when designing FC CAT.
ABSTRACT
BACKGROUND: The emergence of digital technology in the field of psychological and educational measurement and assessment broadens the traditional concept of pencil and paper tests. New assessment models built on the proliferation of smartphones, social networks and software developments are opening up new horizons in the field. METHOD: This study is divided into four sections, each discussing the benefits and limitations of a specific type of technology-based assessment: ambulatory assessment, social networks, gamification and forced-choice testing. RESULTS: The latest developments are clearly relevant in the field of psychological and educational measurement and assessment. Among other benefits, they bring greater ecological validity to the assessment process and eliminate the bias associated with retrospective assessment. CONCLUSIONS: Some of these new approaches point to a multidisciplinary scenario with a tradition which has yet to be created. Psychometrics must secure a place in this new world by contributing sound expertise in the measurement of psychological variables. The challenges and debates facing the field of psychology as it incorporates these new approaches are also discussed.
Subject(s)
Digital Technology , Software , Humans , Retrospective Studies , Psychometrics , Educational MeasurementABSTRACT
Cognitive diagnosis models (CDMs) are used in educational, clinical, or personnel selection settings to classify respondents with respect to discrete attributes, identifying strengths and needs, and thus allowing to provide tailored training/treatment. As in any assessment, an accurate reliability estimation is crucial for valid score interpretations. In this sense, most CDM reliability indices are based on the posterior probabilities of the estimated attribute profiles. These posteriors are traditionally computed using point estimates for the model parameters as approximations to their populational values. If the uncertainty around these parameters is unaccounted for, the posteriors may be overly peaked, deriving into overestimated reliabilities. This article presents a multiple imputation (MI) procedure to integrate out the model parameters in the estimation of the posterior distributions, thus correcting the reliability estimation. A simulation study was conducted to compare the MI procedure with the traditional reliability estimation. Five factors were manipulated: the attribute structure, the CDM model (DINA and G-DINA), test length, sample size, and item quality. Additionally, an illustration using the Examination for the Certificate of Proficiency in English data was analyzed. The effect of sample size was studied by sampling subsets of subjects from the complete data. In both studies, the traditional reliability estimation systematically provided overestimated reliabilities, whereas the MI procedure offered more accurate results. Accordingly, practitioners in small educational or clinical settings should be aware that the reliability estimation using model parameter point estimates may be positively biased. R codes for the MI procedure are made available.
Subject(s)
Awareness , Humans , Reproducibility of Results , Computer SimulationABSTRACT
Background: The emergence of digital technology in the field of psychological and educational measurement and assessment broadens the traditional concept of pencil and paper tests. New assessment models built on the proliferation of smartphones, social networks and software developments are opening up new horizons in the field. Method: This study is divided into four sections, each discussing the benefits and limitations of a specific type of technology-based assessment: ambulatory assessment, social networks, gamification and forced-choice testing. Results: The latest developments are clearly relevant in the field of psychological and educational measurement and assessment. Among other benefits, they bring greater ecological validity to the assessment process and eliminate the bias associated with retrospective assessment. Conclusions: Some of these new approaches point to a multidisciplinary scenario with a tradition which has yet to be created. Psychometrics must secure a place in this new world by contributing sound expertise in the measurement of psychological variables. The challenges and debates facing the field of psychology as it incorporates these new approaches are also discussed.(AU)
Antecedentes: La irrupción de la tecnología digital en las áreas de medición y evaluación psicológica y educativa expande el concepto clásico de test de lápiz y papel. Los modelos de evaluación construidos sobre la ubicuidad de los smartphones, las redes sociales o el desarrollo del software abren nuevas posibilidades para la evaluación. Método: El estudio se organiza en cuatro partes en cada una de las cuales se discuten las ventajas y limitaciones de una aplicación de la tecnología a la evaluación: la evaluación ambulatoria, las redes sociales, la gamificación y las pruebas de elección forzosa. Resultados: Los nuevos desarrollos resultan claramente relevantes en el ámbito de la medición y la evaluación psicológica y educativa. Entre otras ventajas, aportan una mayor validez ecológica al proceso evaluativo y eliminan el sesgo relacionado con la evaluación retrospectiva. Conclusiones: Algunas de estas nuevas aproximaciones llevan a un escenario multidisciplinar con una tradición aún por construir. La psicometría está obligada a integrarse en este nuevo espacio aportando una sólida experiencia en la medición de variables psicológicas. Se muestran los temas de debate y retos que ha de abordar el buen quehacer de la psicología en la incorporación de estas nuevas aproximaciones.(AU)
Subject(s)
Humans , Information Technology/statistics & numerical data , Information Technology/trends , Educational Measurement , Technology , Psychological Tests , Social Networking , Psychometrics , PsychologyABSTRACT
Los nuevos desarrollos metodológicos y tecnológicos de la última década permiten resolver, o al menos atenuar, los problemas psicométricos de los test de elección forzosa (EF) para la medición de la personalidad. En estas pruebas, a la persona evaluada se le muestran bloques de dos o más frases de parecida deseabilidad social, entre las que debe elegir aquella que le represente mejor. De esta manera, los test de EF buscan reducir los sesgos de respuesta en pruebas de autoinforme. No obstante, su uso no está exento de riesgos y complicaciones si no se elaboran adecuadamente. Afortunadamente, los nuevos modelos psicométricos permiten modelar las respuestas en este tipo de test, así como optimizar su construcción. Más aún, permiten la construcción de Test Adaptativos Informatizados de EF (TAI-EF) on-the-fiy, en los que cada bloque se construye en el mismo momento de aplicación, emparejando óptimamente las frases de un banco previamente calibrado.(AU)
The new methodological and technological developments of the last decade make it possible to resolve or, at least, attenuate the psychometric problems of forced-choice (FC) tests for the measurement of personality. In these tests, the person being tested is shown blocks of two or more sentences of similar social desirability, from which he or she must choose which one best represents him or her. Thus, FC tests aim to reduce response bias in self-report questionnaires. However, their use is not without risks and complications if they are not created properly. Fortunately, new psychometric models make it possible to model responses in this type of test and to optimize their construction. Moreover, they allow the construction of on the fly computerized adaptive FC tests (CAT-FC), in which each item is constructed on the spot, optimally matching sentences from a previously calibrated bank.(AU)
Subject(s)
Humans , Personality , Psychometrics/methods , Technology , Information Technology , Personality Assessment , Psychological Tests , Psychology , Psychology, Clinical , Psychology, Social , 57970ABSTRACT
The use of multidimensional forced-choice questionnaires has been proposed as a means of improving validity in the assessment of non-cognitive attributes in high-stakes scenarios. However, the reduced precision of trait estimates in this questionnaire format is an important drawback. Accordingly, this article presents an optimization procedure for assembling pairwise forced-choice questionnaires while maximizing posterior marginal reliabilities. This procedure is performed through the adaptation of a known genetic algorithm (GA) for combinatorial problems. In a simulation study, the efficiency of the proposed procedure was compared with a quasi-brute-force (BF) search. For this purpose, five-dimensional item pools were simulated to emulate the real problem of generating a forced-choice personality questionnaire under the five-factor model. Three factors were manipulated: (1) the length of the questionnaire, (2) the relative item pool size with respect to the questionnaire's length, and (3) the true correlations between traits. The recovery of the person parameters for each assembled questionnaire was evaluated through the squared correlation between estimated and true parameters, the root mean square error between the estimated and true parameters, the average difference between the estimated and true inter-trait correlations, and the average standard error for each trait level. The proposed GA offered more accurate trait estimates than the BF search within a reasonable computation time in every simulation condition. Such improvements were especially important when measuring correlated traits and when the relative item pool sizes were higher. A user-friendly online implementation of the algorithm was made available to the users.
Subject(s)
Algorithms , Personality , Computer Simulation , Humans , Surveys and QuestionnairesABSTRACT
High-resolution 3D scanning devices produce high-density point clouds, which require a large capacity of storage and time-consuming processing algorithms. In order to reduce both needs, it is common to apply surface simplification algorithms as a preprocessing stage. The goal of point cloud simplification algorithms is to reduce the volume of data while preserving the most relevant features of the original point cloud. In this paper, we present a new point cloud feature-preserving simplification algorithm. We use a global approach to detect saliencies on a given point cloud. Our method estimates a feature vector for each point in the cloud. The components of the feature vector are the normal vector coordinates, the point coordinates, and the surface curvature at each point. Feature vectors are used as basis signals to carry out a dictionary learning process, producing a trained dictionary. We perform the corresponding sparse coding process to produce a sparse matrix. To detect the saliencies, the proposed method uses two measures, the first of which takes into account the quantity of nonzero elements in each column vector of the sparse matrix and the second the reconstruction error of each signal. These measures are then combined to produce the final saliency value for each point in the cloud. Next, we proceed with the simplification of the point cloud, guided by the detected saliency and using the saliency values of each point as a dynamic clusterization radius. We validate the proposed method by comparing it with a set of state-of-the-art methods, demonstrating the effectiveness of the simplification method.
Subject(s)
AlgorithmsABSTRACT
The item wording (or keying) effect consists of logically inconsistent answers to positively and negatively worded items that tap into similar (but polarly opposite) content. Previous research has shown that this effect can be successfully modeled through the random intercept item factor analysis (RIIFA) model, as evidenced by the improvements in the model fit in comparison to models that only contain substantive factors. However, little is known regarding the capability of this model in recovering the uncontaminated person scores. To address this issue, the study analyzes the performance of the RIIFA approach across three types of wording effects proposed in the literature: carelessness, item verification difficulty, and acquiescence. In the context of unidimensional substantive models, four independent variables were manipulated, using Monte Carlo methods: type of wording effect, amount of wording effect, sample size, and test length. The results corroborated previous findings by showing that the RIIFA models were consistently able to account for the variance in the data, attaining an excellent fit regardless of the amount of bias. Conversely, the models without the RIIFA factor produced increasingly a poorer fit with greater amounts of wording effects. Surprisingly, however, the RIIFA models were not able to better estimate the uncontaminated person scores for any type of wording effect in comparison to the substantive unidimensional models. The simulation results were then corroborated with an empirical dataset, examining the relationship between learning strategies and personality with grade point average in undergraduate studies. The apparently paradoxical findings regarding the model fit and the recovery of the person scores are explained, considering the properties of the factor models examined.
ABSTRACT
Cognitive diagnosis models (CDMs) allow classifying respondents into a set of discrete attribute profiles. The internal structure of the test is determined in a Q-matrix, whose correct specification is necessary to achieve an accurate attribute profile classification. Several empirical Q-matrix estimation and validation methods have been proposed with the aim of providing well-specified Q-matrices. However, these methods require the number of attributes to be set in advance. No systematic studies about CDMs dimensionality assessment have been conducted, which contrasts with the vast existing literature for the factor analysis framework. To address this gap, the present study evaluates the performance of several dimensionality assessment methods from the factor analysis literature in determining the number of attributes in the context of CDMs. The explored methods were parallel analysis, minimum average partial, very simple structure, DETECT, empirical Kaiser criterion, exploratory graph analysis, and a machine learning factor forest model. Additionally, a model comparison approach was considered, which consists in comparing the model-fit of empirically estimated Q-matrices. The performance of these methods was assessed by means of a comprehensive simulation study that included different generating number of attributes, item qualities, sample sizes, ratios of the number of items to attribute, correlations among the attributes, attributes thresholds, and generating CDM. Results showed that parallel analysis (with Pearson correlations and mean eigenvalue criterion), factor forest model, and model comparison (with AIC) are suitable alternatives to determine the number of attributes in CDM applications, with an overall percentage of correct estimates above 76% of the conditions. The accuracy increased to 97% when these three methods agreed on the number of attributes. In short, the present study supports the use of three methods in assessing the dimensionality of CDMs. This will allow to test the assumption of correct dimensionality present in the Q-matrix estimation and validation methods, as well as to gather evidence of validity to support the use of the scores obtained with these models. The findings of this study are illustrated using real data from an intelligence test to provide guidelines for assessing the dimensionality of CDM data in applied settings.
ABSTRACT
The assessment of human spatial short-term memory has mainly been performed using visual stimuli and less frequently using auditory stimuli. This paper presents a framework for the development of SLAM-based Augmented Reality applications for the assessment of spatial memory. An AR mobile application was developed for this type of assessment involving visual and tactile stimuli by using our framework. The task to be carried out with the AR application is divided into two phases: 1) a learning phase, in which participants physically walk around a room and have to remember the location of simple geometrical shapes; and 2) an evaluation phase, in which the participants are asked to recall the location of the shapes. A study for comparing the performance outcomes using visual and tactile stimuli was carried out. Fifty-three participants performed the task using the two conditions (Tactile vs Visual), but with more than two months of difference (within-subject design). The number of shapes placed correctly was similar for both conditions. However, the group that used the tactile stimulus spent significantly more time completing the task and required significantly more attempts. The performance outcomes were independent of gender. Some significant correlations among variables related to the performance outcomes and other tests were found. The following significant correlations among variables related to the performance outcomes using visual stimuli and the participants' subjective variables were also found: 1) the greater the number of correctly placed shapes, the greater the perceived competence; 2) the more attempts required, the less the perceived competence. We also found that perceived enjoyment was higher when a higher sense of presence was induced. Our results suggest that tactile stimuli are valid stimuli to exploit for the assessment of the ability to memorize spatial-tactile associations, but that the ability to memorize spatial-visual associations is dominant. Our results also show that gender does not affect these types of memory tasks.
Subject(s)
Augmented Reality , Memory, Short-Term , Photic Stimulation , Spatial Memory , Touch Perception , HumansABSTRACT
Decisions on how to calibrate an item bank might have major implications in the subsequent performance of the adaptive algorithms. One of these decisions is model selection, which can become problematic in the context of cognitive diagnosis computerized adaptive testing, given the wide range of models available. This article aims to determine whether model selection indices can be used to improve the performance of adaptive tests. Three factors were considered in a simulation study, that is, calibration sample size, Q-matrix complexity, and item bank length. Results based on the true item parameters, and general and single reduced model estimates were compared to those of the combination of appropriate models. The results indicate that fitting a single reduced model or a general model will not generally provide optimal results. Results based on the combination of models selected by the fit index were always closer to those obtained with the true item parameters. The implications for practical settings include an improvement in terms of classification accuracy and, consequently, testing time, and a more balanced use of the item bank. An R package was developed, named cdcatR, to facilitate adaptive applications in this context.
ABSTRACT
As general factor modeling continues to grow in popularity, researchers have become interested in assessing how reliable general factor scores are. Even though omega hierarchical estimation has been suggested as a useful tool in this context, little is known about how to approximate it using modern bi-factor exploratory factor analysis methods. This study is the first to compare how omega hierarchical estimates were recovered by six alternative algorithms: Bi-quartimin, bi-geomin, Schmid-Leiman (SL), empirical iterative empirical target rotation based on an initial SL solution (SLiD), direct SL (DSL), and direct bi-factor (DBF). The algorithms were tested in three Monte-Carlo simulations including bi-factor and second-order structures and presenting complexities such as cross-loadings or pure indicators of the general factor and structures without a general factor. Results showed that SLiD provided the best approximation to omega hierarchical under most conditions. Overall, neither SL, bi-quartimin, nor bi-geomin produced an overall satisfactory recovery of omega hierarchical. Lastly, the performance of DSL and DBF depended upon the average discrepancy between the loadings of the general and the group factors. The re-analysis of eight classical datasets further illustrated how algorithm selection could influence judgments regarding omega hierarchical.
Subject(s)
Algorithms , Judgment , Factor Analysis, Statistical , Monte Carlo Method , RotationABSTRACT
The Q-matrix identifies the subset of attributes measured by each item in the cognitive diagnosis modelling framework. Usually constructed by domain experts, the Q-matrix might contain some misspecifications, disrupting classification accuracy. Empirical Q-matrix validation methods such as the general discrimination index (GDI) and Wald have shown promising results in addressing this problem. However, a cut-off point is used in both methods, which might be suboptimal. To address this limitation, the Hull method is proposed and evaluated in the present study. This method aims to find the optimal balance between fit and parsimony, and it is flexible enough to be used either with a measure of item discrimination (the proportion of variance accounted for, PVAF) or a coefficient of determination (pseudo-R2 ). Results from a simulation study showed that the Hull method consistently showed the best performance and shortest computation time, especially when used with the PVAF. The Wald method also performed very well overall, while the GDI method obtained poor results when the number of attributes was high. The absence of a cut-off point provides greater flexibility to the Hull method, and it places it as a comprehensive solution to the Q-matrix specification problem in applied settings. This proposal is illustrated using real data.
Subject(s)
Models, Statistical , Research Design , Computer Simulation , PsychometricsABSTRACT
BACKGROUND: Unproctored Internet Tests (UIT) are vulnerable to cheating attempts by candidates to obtain higher scores. To prevent this, subsequent procedures such as a verification test (VT) is carried out. This study compares five statistics used to detect cheating in Computerized Adaptive Tests (CATs): Guo and Drasgow's Z-test, the Adaptive Measure of Change (AMC), Likelihood Ratio Test (LRT), Score Test, and Modified Signed Likelihood Ratio Test (MSLRT). METHOD: We simulated data from honest and cheating candidates to the UIT and the VT. Honest candidates responded to the UIT and the VT with their real ability level, while cheating candidates responded only to the VT, and different levels of cheating were simulated. We applied hypothesis tests, and obtained type I error and power rates. RESULTS: Although we found differences in type I error rates between some of the procedures, all procedures reported quite accurate results with the exception of the Score Test. The power rates obtained point to MSLRT's superiority in detecting cheating. CONCLUSIONS: We consider the MSLRT to be the best test, as it has the highest power rate and a suitable type I error rate
ANTECEDENTES: las pruebas de selección en línea sin vigilancia (UIT) son vulnerables a intentos de falseamiento para obtener puntuaciones superiores. Por ello, en ocasiones se utilizan procedimientos de detección, como aplicar posteriormente un test de verificación (VT). El objetivo del estudio es comparar cinco contrastes estadísticos para la detección del falseamiento en Test Adaptativos Informatizados: Z-test de Guo y Drasgow, Medida de Cambio Adaptativa (AMC), Test de Razón de Verosimilitudes (LRT), Score Test y Modified Signed Likelihood Ratio Test(MSLRT). MÉTODO: se simularon respuestas de participantes honestos y falseadores al UIT y al VT. Para los participantes honestos se simulaban en ambos en función de su nivel de rasgo real; para los falseadores, solo en el VT, y en el UIT se simulaban distintos grados de falseamiento. Después, se obtenían las tasas de error tipo I y potencia. RESULTADOS: Se encontraron diferencias en las tasas de error tipo I entre algunos procedimientos, pero todos menos el Score Test se ajustaron al valor nominal. La potencia obtenida era significativamente superior con el MSLRT. CONCLUSIONES: consideramos que MSLRT es la mejor alternativa, ya que tiene mejor potencia y una tasa de error tipo I ajustada
Subject(s)
Humans , Lie Detection , Deception , Internet , Educational Measurement/statistics & numerical data , Software Validation , Psychological Tests/standards , Psychological Tests/statistics & numerical data , Educational Measurement/standards , Analysis of Variance , ROC CurveABSTRACT
BACKGROUND: The inclusion of direct and reversed items in scales is a commonly-used strategy to control acquiescence bias. However, this is not enough to avoid the distortions produced by this response style in the structure of covariances and means of the scale in question. This simulation study provides evidence on the performance of two different procedures for modelling the influence of acquiescence bias on partially balanced multidimensional scales: a method based on exploratory factor analysis (EFA) with target rotation, and a method based on random intercept factor analysis (RIFA). METHOD: The independent variables analyzed in a simulation study were sample size, number of items per factor, balance of substantive loadings of direct and reversed items, size and heterogeneity of acquiescence loadings, and inter-factor correlation. RESULTS: The RIFA method had better performance over most of the conditions, especially for the balanced conditions, although the variance of acquiescence factor loadings had a certain impact. In relation to the EFA method, it was severely affected by a low degree of balance. CONCLUSIONS: RIFA seems the most robust approach, but EFA also remains a good alternative for medium and fully balanced scales
ANTECEDENTES: la inclusión de ítems directos e inversos en escalas es una estrategia comúnmente utilizada para controlar el sesgo de aquiescencia. No obstante, esto es insuficiente para evitar las distorsiones producidas por este estilo de respuesta en la estructura de covarianzas y medias de la escala. El presente estudio de simulación aporta evidencia sobre el rendimiento de dos procedimientos para controlar la influencia del sesgo de aquiescencia en escalas multidimensionales parcialmente balanceadas: un método basado en análisis factorial exploratorio con rotación target (EFA), y un método basado en el análisis factorial confirmatorio con intercepto aleatorio (RIFA). MÉTODO: las variables independientes del estudio de simulación fueron: tamaño muestral, número de ítems por factor, balanceo de los pesos sustantivos de los ítems directos e inversos, tamaño y heterogeneidad de los pesos en aquiescencia, y correlación entre factores. RESULTADOS: el método RIFA tiene mejor funcionamiento en general, especialmente para las condiciones balanceadas, aunque la varianza de los pesos de aquiescencia tuvo impacto en su rendimiento. El método EFA se ve principalmente afectado en la situación de bajo balanceo. CONCLUSIONES: el RIFA parece la aproximación más robusta, aunque el EFA se mantiene como una alternativa a considerar para escalas con balanceo medio o completo