Aluminium phosphide (Al12P12) nanocage as a potential sensor for volatile organic compounds: A DFT study.

The efficacy of aluminium phosphide (Al12P12) nanocage toward sensing methanol (MeOH) and ethanol (EtOH) volatile organic compounds (VOCs) was herein thoroughly elucidated utilizing various density functional theory (DFT) computations. In this perspective, MeOH⋯ and EtOH⋯Al12P12 complexes were investigated within all plausible configurations. According to the energetic features, the EtOH⋯Al12P12 complexes exhibited larger negative values of adsorption and interaction energies with values up to -27.23 and -32.84 kcal mol-1, respectively, in comparison to the MeOH⋯Al12P12 complexes. Based on the symmetry-adapted perturbation theory (SAPT) results, the electrostatic forces were pinpointed as the predominant component beyond the adsorption process within the preferable MeOH⋯ and EtOH⋯Al12P12 complexes. The findings of the noncovalent interaction (NCI) index and quantum theory of atoms in molecules (QTAIM) outlined the closed-shell nature of the interactions within the studied complexes. Substantial variations were found in the molecular orbitals distribution patterns of MeOH/EtOH molecules and Al12P12 nanocage, outlining the occurrence of the adsorption process within the complexes under investigation. Thermodynamic parameters were denoted with negative values, demonstrating the spontaneous exothermic nature of the most favorable complexes. New energy states were observed within the extracted density of states plots, confirming the impact of adsorbing MeOH and EtOH molecules on the electronic properties of the Al12P12 nanocage. The appearance of additional peaks in Infrared Radiation (IR) and Raman spectra revealed the apparent effect of the adsorption process on the features of the utilized sensor. The emerging results declared the potential uses of Al12P12 nanocage as a promising candidate for sensing VOCs, particularly MeOH and EtOH.

Exploring the structural, electronic, and hydrogen storage properties of hexagonal boron nitride and carbon nanotubes: insights from single-walled to doped double-walled configurations.

This study investigates the structural intricacies and properties of single-walled nanotubes (SWNT) and double-walled nanotubes (DWNT) composed of hexagonal boron nitride (BN) and carbon (C). Doping with various atoms including light elements (B, N, O) and heavy metals (Fe, Co, Cu) is taken into account. The optimized configurations of SWNT and DWNT, along with dopant positions, are explored, with a focus on DWNT-BN-C. The stability analysis, employing binding energies, affirms the favorable formation of nanotube structures, with DWNT-C emerging as the most stable compound. Quantum stability assessments reveal significant intramolecular charge transfer in specific configurations. Electronic properties, including charge distribution, electronegativity, and electrical conductivity, are examined, showcasing the impact of doping. Energy gap values highlight the diverse electronic characteristics of the nanotubes. PDOS analysis provides insights into the contribution of atoms to molecular orbitals. UV-Vis absorption spectra unravel the optical transitions, showcasing the influence of nanotube size, dopant type, and location. Hydrogen storage capabilities are explored, with suitable adsorption energies indicating favorable hydrogen adsorption. The desorption temperatures for hydrogen release vary across configurations, with notable enhancements in specific doped DWNT-C variants, suggesting potential applications in high-temperature hydrogen release. Overall, this comprehensive investigation provides valuable insights into the structural, electronic, optical, and hydrogen storage properties of BN and C nanotubes, laying the foundation for tailored applications in electronics and energy storage.

Promising sensors for pharmaceutical pollutant adsorption using Clar's goblet-based 2D membranes.

This study focuses on the design of new 2D membranes from connected Clar's Goblet as a potential sensor for pharmaceutical pollutants, specifically the painkiller drugs aspirin, paracetamol, ibuprofen, and diclofenac. The electronic, optical, and interaction properties are investigated using density functional theory calculations. The Clar's Goblet membranes (CGMs) that were chosen are semiconductors with an energy gap of around 1.5 eV, according to energy gap calculations and density of states. Molecular electrostatic potential (ESP) analysis shows that CGMs have electrophilic and nucleophilic sites, suggesting their suitability for interacting with pharmaceutical pollutants. The adsorption energies confirm the chemical adsorption of pharmaceutical pollutants with diclofenac showing the strongest adsorption. The UV-Vis absorption spectra of CGMs-drug complexes are analyzed, revealing a redshift compared to the absorption spectrum of CGMs alone, confirming the adsorption of these drugs. Further analysis using hole/electron examinations indicates that the type of excitation is local excitation rather than charge transfer excitation. This study quantitatively characterized hole and electron distribution in excited states using various indices. The analysis revealed local excitation transitions and significant charge transfer between the CGMs molecule and pharmaceutical pollutants. Additionally, non-covalent interaction analysis indicates the presence of van der Waals interactions, highlighting the adsorption behavior of the drugs. These results demonstrate the potential of CGMs as a highly sensitive sensor for pharmaceutical pollutants.

Temporal and Spatial Variations of Potentially Toxic Elements in PM10 Collected in Jeddah City, Saudi Arabia.

Air pollution causes environmental and health problems around the world. In this study, ambient particulate matter with an aerodynamic diameter equal to or less than 10 microns (PM10) has been collected at three different locations in Jeddah city, Saudi Arabia. The locations are characterized by differences in terms of traffic, residential intensity, industrial, and non-road mobile machinery activities. The monthly and annual mass concentration of the PM10 exceeds the recommended annual limit of the World Health Organization (15 µg/m3) and the European air quality standard (40 µg/m3) at the three locations. The collected PM10 samples as well as a certified reference material of atmospheric particulates (NIST 1678a) were digested in aqua regia using microwave digestion. The quantitative elemental analysis was carried out using inductively coupled plasma mass spectrometry. The variations of the elemental concentration in terms of workdays, weekends, seasons, and annual were determined at the three locations. The spatial and temporal elemental variations were found to be different between the three sites, pointing to local influences that should be further evaluated. The concentration of Cd was found to be high and may cause health problems.

Seasonal influence on physicochemical properties of the sediments from Bay of Bengal coast with statistical approach.

The current study aims to investigate the influence of seasonal changes on the pollution loads of the sediment of a coastal area in terms of its physicochemical features. The research will focus on analyzing the nutrients, organic carbon and particle size of the sediment samples collected from 12 different sampling stations in 3 different seasons along the coastal area. Additionally, the study discusses about the impact of anthropogenic activities such as agriculture and urbanization and natural activities such as monsoon on the sediment quality of the coastal area. The nutrient changes in the sediment were found to be: pH (7.96-9.45), EC (2.89-5.23 dS/m), nitrogen (23.98-57.23 mg/kg), phosphorus (7.75-11.36 mg/kg), potassium (217-398 mg/kg), overall organic carbon (0.35-0.99%), and sediment proportions (8.91-9.3%). Several statistical methods were used to investigate changes in sediment quality. According to the three-way ANOVA test, the mean value of the sediments differs significantly with each season. It correlates significantly with principal factor analysis and cluster analysis across seasons, implying contamination from both natural and man-made sources. This study will contribute to developing effective management strategies for the protection and restoration of degraded coastal ecosystem.

A microbiological identification and recovery actions of critical symptoms of anammox image bacteria.

Currently, the risks posed by bacteria are becoming increasingly important. It now appears that the cell wall of Anammox image bacteria is very different from what has been generally considered for many years. Not every textbook contains the peptidoglycan on the cell wall of Anammox image bacteria - the sugar-protein chain that strengthens the cells of most bacteria. Most researchers in this Anammox image bacteria diseased identification wanted to find out what gave the Anammox image cell its stability. It used powerful cryo-electron microscopes to examine the bacterial cell wall and find the exact structure of the peptidoglycan. A new algorithm is proposed to discover that Anammox image bacteria contain peptidoglycan, which completes a theory in microbiology. The identification of different diseases is listed, and the proposed model compares the exact results while comparing the parameters like accuracy, precision, recall, and F1-Score. Keywords: Anammox image bacteria, cell wall, cell stability, cryo-electron, microscope images, accuracy, precision, recall, F1-score.

Photocatalytic degradation of naphthol blue from Batik wastewater using functionalized TiO2-based composites.

This work provides a first-time comparative study examining the photocatalytic activity of functionalized TiO2-based composites to eliminate naphthol blue in Batik wastewater. Reduced graphene oxide (RGO) was synthesized by oxidizing solid graphite using the Hummers' method followed by sonication and reduction. N-doped TiO2 (N-TiO2) was synthesized from titanium tetrachloride (TiCl4) and urea (CH4N2O) precursors by the sol-gel method. N-TiO2 modified RGO (RGO/NT) was synthesized using a hydrothermal method from N-TiO2 and RGO. Prepared TiO2-based composites and commercial TiO2, for comparison were characterized using Fourier transform infrared spectrometer (FTIR), X-Ray diffractometer (XRD), scanning electron microscope-energy dispersive X-ray (SEM-EDX), and UV-Vis diffuse reflectance spectrometer (UV-Vis DRS). FTIR characterization indicated Ti-N bonding in N-TiO2 and RGO/NT. XRD patterns showed that commercial TiO2 had a rutile phase, while N-TiO2 and RGO/NT had an anatase phase with crystal sizes of 30.09, 16.28, and 12.02 nm, respectively. SEM results displayed the presence of small and glossy white N-TiO2 dispersed on the surface of RGO. Characterization using UV-Vis DRS showed that the band gap energy values for TiO2, N-TiO2, and RGO/NT were 3.25, 3.12, and 3.08 eV with absorption regions at the wavelengths of 382, 398, and 403 nm, respectively. The highest photocatalytic activity for RGO/NT for degrading naphthol blue was obtained at pH 5, with a photocatalyst mass of 60 mg, and an irradiation of 15 min. Photocatalytic degradation by RGO/NT on Batik wastewater under visible light showed higher effectivity than under UV light.

Simultaneous photocatalytic removal of organic dye and heavy metal from textile wastewater over N-doped TiO2 on reduced graphene oxide.

Methylene blue (MB) and hexavalent chromium(Cr(VI)) are hazardous pollutants in textile waste and cannot be completely removed using conventional methods. So far, there have been no specific studies examining the synthesis and activity of N-TiO2/rGO as a photocatalyst for removing MB and Cr(VI) from textile wastewater. This work especially highlights the synthesis of N-TiO2/rGO as a photocatalyst which exhibits a wider range of light absorption and is highly effective for simultaneous removal of MB-Cr(VI) under visible light. Titanium tetrachloride (TiCl4) was used as the precursor for N-TiO2 synthesis using the sol-gel method. Graphite was oxidized using Hummer's method and reduced with hydrazine to produce rGO. N-TiO2/rGO was synthesized using a hydrothermal process and then analyzed using several characterization instruments. The X-ray diffraction pattern (XRD) showed that the anatase N-TiO2/rGO phase was detected at the diffraction peak of 2θ = 25.61. Scanning electron microscopy and transmission electron microscopy (SEM-EDS and TEM) dispersive X-ray spectrometry images show that N-TiO2 particles adhere to the surface of rGO with uniform size and N and Ti elements are present in the N-TiO2/rGO combined investigated. Gas absorption analysis data (GSA) shows that N-TiO2/rGO had a surface area of 77.449 m2/g, a pore volume of 0.335 cc/g, and a pore size of 8.655 nm. The thermogravimetric differential thermal analysis (TG-DTA) curve showed the anatase phase at 500-780 °C with a weight loss of 0.85%. The N-TiO2/rGO composite showed a good photocatalyst application. The photocatalytic activity of N-TiO2/rGO for textile wastewater treatment under visible light showed higher effectiveness than ultraviolet light, with 97.92% for MB and 97.48% for Cr(VI). Combining N-TiO2 with rGO is proven to increase the light coverage in the visible light region. Removal of MB and Cr(VI) can be carried out simultaneously and results in a removal efficiency of 95.96%.

Impact of ZnS/Mn on the Structure, Optical, and Electric Properties of PVC Polymer.

The most efficient way to create novel materials that may be used in a variety of optoelectronic applications is thought to be doped mixed polymers with appropriate fillers. Undoped and doped PVC polymers with ZnS/Mn formed at different temperatures were fabricated using the casting method. The Rietveld method was used to discover the structure and microstructure of Zn0.95Mn0.05S prepared at T = 300, 400, and 500 °C. The distribution and existence of the nanofiller over the PVC matrix were determined via XRD, FTIR, EDS, and SEM techniques. The effect of the preparation temperatures of the ZnS/Mn nanofiller on the absorption, transmittance, reflectance, refractive index, extinction coefficient, dielectric constant, AC conductivity, electrical modulus, and DC conductivity activation energy data of the PVC polymer was studied using the diffused reflectance technique. Doping PVC with ZnS/Mn (prepared at 300 °C) lowered the direct and indirect optical band gaps from 5.4 and 4.52 eV to minimum values of 4.55 and 3.63 eV. The fluorescence intensity of pure PVC is greatly enhanced upon loading with ZnS/Mn. The PVC exhibited two near UV peaks, one violet and one blue color, while, in addition, the doped polymers exhibited green and orange colors. The corresponding CIE diagram for all the samples was also determined.

Zn application through seed priming improves productivity and grain nutritional quality of silage corn.

The micronutrient application in agriculture takes place through soil application, foliar spraying or added as seed treatments. The latter method, the nutri-priming, is an appealing option due to the easiness in handling it, environment-friendly, cost effectiveness and efficient against multiple environmental stressors. To assess the feasibility of Zn-priming technique on seeds germination, two experiments were conducted and assessed the efficiency on the growth rate, yield and biofortification on the forage maize (Zea mays L.). The first laboratory experiment assessed the effect of Zn-priming for three-time exposures (i.e., 8, 16 and 24 h) on germination parameters. The second experiment was done in a greenhouse, by using the 10 seeds obtained from 24 h priming. Five seed pretreatments were studied (0, 0.1, 0.5, 1 and 11 2 % of zinc sulfate heptahydrate (ZnSO4·7H2O)) compared to the recommended dose (5 ppm of Zn at 5-9 leaf stage) provided by soil application. The obtained results revealed that all seed priming, including hydro-priming, improve seed germination performance. Zn-priming increased the grain yield and helped to enrich the seeds in this element, especially seedlings treated with 0.5 % Zn sulphate for 24 h leading to an increase in yield by 47 % and in Zn content by 15 %. The comparison of the results from both techniques showed that Zn-priming could be was very effective than the traditional direct application in soil.

Complete green synthesis of silver-nanoparticles applying seed-borne Penicillium duclauxii.

Seed-borne fungus Penicillium duclauxii was examined in this study to investigate its capability of synthesizing silver nanoparticles (Ag-NPs). In vitro experiments were conducted using corn-grain contaminating fungal isolate. Ag-NPs detection and characterization were assayed by the aid of spectroscopic techniques. Spectroscopy (energy dispersive), X-ray diffraction, transmission electron-microscope and optical absorption dimensions were employed. Ag-NPs with biosynthesized were used to test invitro against Bipolaris sorghicola; the cause of target leaf spot disease on sorghum plants. The myco-synthesis of Ag NPs using Penicillium duclauxii was proved in this study. Moreover, Bipolaris sorghicola was successfully inhibited by such Ag NPs in vitro.

Resveratrol and Neuroprotection: Impact and Its Therapeutic Potential in Alzheimer's Disease.

Alzheimer's disease (AD) is a progressive cortex and hippocampal neurodegenerative disease which ultimately causes cognitively impaired decline in patients. The AD pathogen is a very complex process, including aggregation of Aß (ß-amyloid peptides), phosphorylation of tau-proteins, and chronic inflammation. Exactly, resveratrol, a polyphenol present in red wine, and many plants are indicated to show the neuroprotective effect on mechanisms mostly above. Resveratrol plays an important role in promotion of non-amyloidogenic cleavage of the amyloid precursor protein. It also enhances the clearance of amyloid beta-peptides and reduces the damage of neurons. Most experimental research on AD and resveratrol has been performed in many species, both in vitro and in vivo, during the last few years. Nevertheless, resveratrol's effects are restricted by its bioavailability in the reservoir. Therefore, scientists have tried to improve its efficiency by using different methods. This review focuses on recent work done on the cell and animal cultures and also focuses on the neuroprotective molecular mechanisms of resveratrol. It also discusses about the therapeutic potential onto the treatment of AD.

Elemental Composition of PM2.5 Aerosol in a Residential-Industrial Area of a Mediterranean Megacity.

Very little is known about the elemental composition and possible sources of fine aerosol particles from Mediterranean megacities. Fine aerosol particles were collected at a residential-industrial area in Greater Cairo, Egypt, during the period from October 2010 to May 2011. The elemental compositions of the collected samples were quantified by using a homemade energy dispersive x-ray fluorescence spectrometer, whereas black carbon was quantified by a black smoke detector. Fifteen elements have been quantified. Of these constituents, Ca, C, Cl, S, and Fe had the highest concentrations: greater than 1 µg m-3. The overall mean mass concentration of the collected samples equals 70 µg m-3; this value exceeds the European Union annual Air Quality Standard levels. The individual elemental concentrations of the fine particles were found to be dominated by elements linked to mineral dust. Most of the monthly variations of elemental concentrations can be attributed to seasonal meteorological conditions. Other possible sources were vehicle-exhaust and industrial activities. The results pinpoint the problem of identifying different sources when one source, in this case, the nearby deserts, is dominant. The results from this study contribute to the growing knowledge of concentrations, composition, and possible sources of ambient fine particulate matter.

Role of N-Acetylcysteine and Coenzyme Q10 in the Amelioration of Myocardial Energy Expenditure and Oxidative Stress, Induced by Carbon Tetrachloride Intoxication in Rats.

This study is designed to evaluate the potential impact of N-acetyl cysteine (NAC) and coenzyme Q10 (CoQ10) each alone or in combination against carbon tetrachloride (CCl4)-induced cardiac damage in rats. Animals were treated with CCl4 in single intraperitoneal dose of 1 mL/Kg body weight; CCl4-intoxicated animals were pretreated with 20 mg/kg/d NAC or pretreated with 200 mg/kg/d CoQ10 or NAC and CoQ10 with the same previously mentioned doses. Carbon tetrachloride-intoxicated rats showed a significant elevation in nitric oxide and lipid peroxides and downregulation in reduced glutathione level and calcium adenosine triphosphatase. Cardiac glycolytic enzymes levels such as lactate dehydrogenase, phosphofructokinase, and hexokinase were declined coupled with a reduction in glucose content after CCl4 treatment. Moreover, myocardial hydroxyproline level was significantly increased after CCl4-treatment indicating accumulation of interstitial collagen. N-acetyl cysteine and/or CoQ10 effectively alleviated the disturbances in myocardial oxidative stress and antioxidant markers. These antioxidants effectively upregulated the reduction in cardiac energetic biomarkers due to CCl4 treatment. N-acetyl cysteine and/or CoQ10 significantly decreased hydroxyproline level compared to that of CCl4-treated rats. The current data showed that the aforementioned antioxidants have a remarkable cardioprotective effect, suggesting that they may be useful as prophylactic agents against the detrimental effects of cardiotoxins.

Characterization and anti-Aspergillus flavus impact of nanoparticles synthesized by Penicillium citrinum.

This work was conducted to evaluate the ability of grape molding fungus; Penicillium citrinum to synthesize silver nanoparticles (Ag NPs). The potency of biosynthesized Ag NPs was checked against the aflatoxigenic Aspergillus flavus var. columnaris, isolated from sorghum grains. Biosynthesized Ag NPs were characterized and confirmed in different ways. X ray diffraction (XRD), Energy Dispersive Spectroscopy (EDS), Transmission Electron Microscopy (TEM) and optical absorption measurements confirmed the bio-synthesis of Ag NPs. The in vitro antifungal investigation showed that biosynthesized Ag NPs were capable of inhibiting the growth of aflatoxigenic A. flavus var. columnaris. Utilization of plant pathogenic fungi in the Ag NPs biosynthesis as well as the use of bio-Ag NPs to control fungal plant diseases instead of chemicals is promising. Further work is needed to confirm the efficacy of the bio-Ag NPs against different mycotoxigenic fungi and to determine the potent applicable doses.

Thymol and carvacrol induce autolysis, stress, growth inhibition and reduce the biofilm formation by Streptococcus mutans.

Organic compounds from plants are an attractive alternative to conventional antimicrobial agents. Therefore, two compounds namely M-1 and M-2 were purified from Origanum vulgare L. and were identified as carvacrol and thymol, respectively. Antimicrobial and antibiofilm activities of these compounds along with chlorhexidine digluconate using various assays was determined against dental caries causing bacteria Streptococcus mutans. The IC50 values of carvacrol (M-1) and thymol (M-2) against S. mutans were 65 and 54 µg/ml, respectively. Live and dead staining and the MTT assays reveal that a concentration of 100 µg/ml of these compounds reduced the viability and the metabolic activity of S. mutans by more than 50%. Biofilm formation on the surface of polystyrene plates was significantly reduced by M-1 and M-2 at 100 µg/ml as observed under scanning electron microscope and by colorimetric assay. These results were in agreement with RT-PCR studies. Wherein exposure to 25 µg/ml of M-1 and M-2 showed a 2.2 and 2.4-fold increase in Autolysin gene (AtlE) expression level, respectively. While an increase of 1.3 and 1.4 fold was observed in the super oxide dismutase gene (sodA) activity with the same concentrations of M-1 and M-2, respectively. An increase in the ymcA gene and a decrease in the gtfB gene expression levels was observed following the treatment with M-1 and M-2. These results strongly suggest that carvacrol and thymol isolated from O. vulgare L. exhibit good bactericidal and antibiofilm activity against S. mutans and can be used as a green alternative to control dental caries.

Synthesis and characterization of some abundant nanoparticles, their antimicrobial and enzyme inhibition activity.

Although the antimicrobial activity of the engineered nanoparticles (NPs) is well known, the biochemical mechanisms underlying this activity are not clearly understood. Therefore, four NPs with the highest global production, namely SiO2, TiO2, ZnO, and Ag, were synthesized and characterized. The synthesized SiO2, TiO2, ZnO, and Ag NPs exhibit an average size of 11.12, 13.4, 35, and 50 nm, respectively. The antimicrobial activity of the synthesized NPs against bacteria and fungi were also determined. NPs-mediated inhibition of two very important enzymes, namely urease and DNA polymerase, is also reported. The synthesized NPs especially Ag and ZnO show significant antimicrobial activity against bacteria and fungi including methicillin-resistant Staphylococcus aureus even at low concentration. The DNA polymerase activity was inhibited at a very low concentration range of 2-4 µg/ml, whereas the urease activity was inhibited at a high concentration range of 50-100 µg/ml. Based on their ability to inhibit the urease and DNA polymerase, NPs can be arranged in the following order: Ag > ZnO > SiO2 > TiO2 and Ag > SiO2 > ZnO > TiO2, respectively. As the synthesized NPs inhibit bacterial growth and suppress the activity of urease and DNA polymerase, the use of these NPs to control pathogens is proposed.

Bioengineered silver nanoparticles using Curvularia pallescens and its fungicidal activity against Cladosporium fulvum.

Microorganisms based biosynthesis of nanomaterials has triggered significant attention, due to their great potential as vast source of the production of biocompatible nanoparticles (NPs). Such biosynthesized functional nanomaterials can be used for various biomedical applications. The present study investigates the green synthesis of silver nanoparticles (Ag NPs) using the fungus Curvularia pallescens (C. pallescens) which is isolated from cereals. The C. pallescens cell filtrate was used for the reduction of AgNO3 to Ag NPs. To the best of our knowledge C. pallescens is utilized first time for the preparation of Ag NPs. Several alkaloids and proteins present in the phytopathogenic fungus C. pallescens were mainly responsible for the formation of highly crystalline Ag NPs. The as-synthesized Ag NPs were characterized by using UV-Visible spectroscopy, X-ray diffraction and transmission electron microscopy (TEM). The TEM micrographs have revealed that spherical shaped Ag NPs with polydisperse in size were obtained. These results have clearly suggested that the biomolecules secreted by C. pallescens are mainly responsible for the formation and stabilization of nanoparticles. Furthermore, the antifungal activity of the as-prepared Ag NPs was tested against Cladosporium fulvum, which is the major cause of a serious plant disease, known as tomato leaf mold. The synthesized Ag NPs displayed excellent fungicidal activity against the tested fungal pathogen. The extreme zone of reduction occurred at 50 µL, whereas, an increase in the reduction activity is observed with increasing the concentration of Ag NPs. These encouraging results can be further exploited by employing the as synthesized Ag NPs against various pathogenic fungi in order to ascertain their spectrum of fungicidal activity.

Levels of Trace Elements in Black Teas Commercialized in Saudi Arabia Using Inductively Coupled Plasma Mass Spectrometry.

The present work has been demonstrated a developed method for the determination of Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, As, Cr, Pb, and V in different types of black teas collected from Saudi Arabia market using inductively coupled plasma mass spectrometry (ICP-MS). Each sample represents a well-mixed combination of ten packets from the same type collected from the market. Detection limits in ng g-1 were 76.06, 166.03, 5.94, 2.94, 18.29, 18.29, 9.00, 0.48, 0.48, 7.67, 3.07, and 4.21 for Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, As, Cr, Pb, and V, respectively. In order to validate the developed method, a certified reference material of green tea was analyzed. Further comparison with the results obtained from high-resolution continuum source atomic absorption spectrometry (HR-CS-AAS) was demonstrated. The obtained good agreement confirms the validity of the investigated method. Fortunately, the concentrations of the heavy metals locate on the range of the international values. The highest metal content was found in Al-Rabee tea, and this type results should be confirmed by using a large number of samples in order to have satisfied and confirmed statistical analysis results.

Structural and molecular characterization of Kudoa quraishii n. sp. from the trunk muscle of the Indian mackerel Rastrelliger kanagurta (Perciforme, Scombridae) in Saudi Arabia coasts.

A new Myxozoa, Kudoa quraishii n. sp., is reported in the striated muscle of the Indian mackerel Rastrelliger kanagurta from the Red Sea and the Arabian Gulf in Saudi Arabia. Mean prevalence of infection is about 20% and varies between localities. The parasite develops whitish and oval or rounded pseudocysts of 0.2-3 mm in the striated muscles of the body. Pseudocysts are filled with mature spores. Myxospores are quadrate in shape in apical view with rounded edges and ovoid in side view. Each spore is formed by four equal shell valves and four symmetrical polar capsules. Polar capsules are pyriform in apical view and drop-like in side view. Myxospore measurements in micrometers are 6.14 (5.9-6.34) in width, 5.48 (5.3-5.71) in thickness, and 4.27 (4.1-4.42) in length. Polar capsule measurements in apical view in micrometers are 2.08 (1.88-2.28) and 1.31 (1.10-1.52) length by width. Molecular analysis based on SSU rDNA gene shows closest association with K. amamiensis and K. kenti with respectively 98 and 97.2% of similarities.