A novel green spectrofluorimetric method for simultaneous determination of antazoline and tetryzoline in their ophthalmic formulation.

A novel spectrofluorimetric method has been developed for determination of antazoline (ANT) and tetryzoline (TET) in their pharmaceutical formulation. A combined application of synchronous spectrofluorimetry and second derivative mathematical treatment was developed. The proposed method depends on reacting the cited drugs with dansyl chloride (DNS-Cl) being a suitable derivatizing agent generating highly fluorescent derivatives measured at emission wavelengths of 703.0 and 642.0 nm after excitation wavelengths of 350.0 and 320.0 nm for ANT and TET, respectively. The joint use of synchronous spectrofluorimetry with second derivative mathematical treatment is for the first time to be developed and optimized in aid of using fluorescence data manager software generating second derivative peak amplitudes at 556.5 nm for ANT and 516.7 nm for TET. Linear responses have been represented over a wide range of concentration (0.5-12.0 µg/mL for ANT and 0.5-10.0 µg/mL for TET). Additionally, statistical comparison of the developed method with the official ones has been carried out where no significant difference was found. Additionally, greenness profile assessment was accomplished by means of four metric tools. Indeed, the method developed is found to be precise, sensitive, and discriminating to assess the cited drugs for regular analysis.

A Novel Spectrofluorimetric Determination of Antazoline and Xylometazoline in their Ophthalmic Formulation; Green Approach and Evaluation.

A green developed spectrofluorimetric method has been applied for Antazoline (ANT) and Xylometazoline (XLO) determination in both pharmaceutical formulation and pure form. The developed method is synchronous spectrofluorimetry coupled with the second derivative mathematical tool for the determination of antazoline and xylometazoline in their dosage form. The developed method depends on reacting the cited drugs with dansyl chloride, a suitable derivatizing agent, to generate highly fluorescent derivatives. The products formed were measured at emission wavelengths; 703.0 and 712.0 nm after being excited at wavelengths; 350.0 and 355.0 nm for antazoline and xylometazoline, respectively. Synchronous spectrofluorimetry coupled with second derivative mathematical tool was developed and optimized using fluorescence data manager software generating second derivative peak amplitudes at 556.5 nm for antazoline and 598.0 nm for xylometazoline. Linear responses have been represented over a wide range of concentration 0.5-12.0 µg/mL for antazoline and 0.1-10.0 µg/mL for xylometazoline, correspondingly. Method validation was successfully applied. Additionally, statistical comparison of developed method with official ones has been carried out where no significant difference was found. Evaluation of the method's greenness was proven using several assessment tools. Indeed, the method developed is found to be precise, sensitive, and discriminating to assess the cited drugs for regular analysis.

Sustainable chromatographic quantitation of multi-antihypertensive medications: application on diverse combinations containing hydrochlorothiazide along with LC-MS/MS profiling of potential impurities: greenness and whiteness evaluation.

Cardiovascular disorders are among the leading causes of death worldwide, especially hypertension, a silent killer syndrome requiring multiple drug therapy for appropriate management. Hydrochlorothiazide is an extensively utilized thiazide diuretic that combines with several antihypertensive drugs for effective treatment of hypertension. In this study, sustainable, innovative and accurate high performance liquid chromatographic methods with diode array and tandem mass detectors (HPLC-DAD and LC-MS/MS) were developed, optimized and validated for the concurrent determination of Hydrochlorothiazide (HCT) along with five antihypertensive drugs, namely; Valsartan (VAL), Amlodipine besylate (AML), Atenolol (ATN), Amiloride hydrochloride (AMI), and Candesartan cilextil (CAN) in their diverse pharmaceutical dosage forms and in the presence of Chlorothiazide (CT) and Salamide (DSA) as HCT officially identified impurities. The HPLC-DAD separation was achieved utilizing Inertsil ODS-3 C18 column (250 × 4.6 mm, 5 µm) attached with photodiode array detection at 225.0 nm. Gradient elution was performed utilizing a mixture of solvent A (20.0 mM potassium dihydrogen phosphate, pH 3.0 ± 0.2, adjusted with phosphoric acid) and solvent B (acetonitrile) at ambient temperature. Linearity ranges were 0.1-100.0 µg/mL for HCT, VAL, AML and CAN, 0.05 -100.0 µg/mL for both ATN and AMI and 0.05-8.0 µg/mL for both CT and DSA. Additionally, this work describes the use of liquid chromatography-electrospray-tandem mass spectrometry for the accurate detection and quantification of the impurities; CT and DSA in the negative mode utilizing triple quadrupole mass spectrometry. The linearity ranges for those impurities were 1.0-200.0 ng/mL and 5.0-200.0 ng/mL for CT and DSA, respectively. Developed methods' validation was achieved in accordance with International Conference on Harmonization (ICH) guidelines. Upon applying liquid chromatographic techniques for the drug analysis, a green and sustainable assessment have to be handled due to the consumption of energy and many solvents. Through the use of the HEXAGON, Analytical Greenness (AGREE) and White Analytical Chemistry (WAC) tools, greenness and sustainability have been statistically assessed. The optimized HPLC-DAD and LC-MS/MS methods were fast, accurate, precise, and sensitive, and consequently could be applied for conventional analysis and quality control of the proposed drugs in their miscellaneous dosage forms for the purpose of reducing laboratory wastes, time of the analysis time, effort, and cost.

Exquisite integration of quality-by-design and green analytical approaches for simultaneous determination of xylometazoline and antazoline in eye drops and rabbit aqueous humor, application to stability study.

This work implements a stability indicating HPLC method developed to simultaneously determine xylometazoline (XYLO) and antazoline (ANT) in their binary mixture, rabbit aqueous humor and cited drug's degradates by applying analytical quality-by-design (AQbD) combined with green analytical chemistry (GAC) experiment for the first time. This integration was designed to maximize efficiency and minimize environmental impacts, as well as energy and solvent consumption. Analytical quality-by-design was applied to achieve our aim starting with evaluation of quality risk and scouting analysis, tracked via five parameters chromatographic screening using Placket-Burman design namely: pH, temperature, organic solvent percentage, flow rate, and wavelength detection. Recognizing the critical method parameters was done followed by optimization employing central composite design and Derringer's desirability toward assess optimum conditions that attained best resolution with satisfactory peak symmetry with short run time. Optimal chromatographic separation was attained by means of an XBridge® C18 (4.6 × 250 mm, 5 µm) column through isocratic elution using a mobile phase consists of phosphate buffer (pH 3.0): ethanol (60:40, by volume) at a 1.6 mL/min flow rate and 230.0 nm UV detection. Linearity acquired over a concentration range of 1.0-100.0 µg/mL and 0.5-100.0 µg/mL for XYLO and ANT, respectively. Furthermore, imperiling cited drugs' stock solutions to stress various conditions and satisfactory peaks of degradation products were obtained indicating that cited drugs are vulnerable to oxidative degradation and basic hydrolysis. Degradates' structures were elucidated using mass spectrometry. Applying various assessment tools; namely: analytical greenness (AGREE), green analytical procedure index (GAPI), analytical eco-scale, and national environmental method index (NEMI), Greenness method's evaluation was applied and proved to be green. In fact, the developed method is established to be perceptive, accurate, and selective to assess cited drugs for routine analysis.

Green TLC-Densitometric Method for Simultaneous Determination of Antazoline and Tetryzoline: Application to Pharmaceutical Formulation and Rabbit Aqueous Humor.

Ophthalmic pharmaceutical preparation containing antazoline (ANT) and tetryzoline (TET) is prescribed widely as an over the counter medication for allergic conjunctivitis treatment. Development of a selective, simple and environmentally friendly thin-layer chromatographic method established to determine both ANT and TET in their pure forms, pharmaceutical formulation and spiked aqueous humor samples. By using silica gel plates and means of a developing system consists of ethyl acetate:ethanol (5:5, by volume), the studied drugs separation was achieved, and scanning was carried out at 220.0 nm for the separated bands with a 0.2-18.0 µg/band concentration range for each of ANT and TET. Standard addition technique application was carried out to determine the proposed method validity. Statistical comparison was made between the proposed method and the official methods ANT and TET showing no significant difference concerning accuracy and precision. Furthermore, greenness profile assessment was accomplished by means of four metric tools, namely, analytical greenness, green analytical procedure index, analytical eco-scale and national environmental method index.Highlights.

Spectrophotometric platform windows' exploitation for the green determination of Alcaftadine in presence of its oxidative degradation product.

This study presents the determination of Alcaftadine (ALF) in its oxidative degradation product presence by applying comprehensive study comparative of four different green stability indicating spectrophotometric approaches through successful exploitation of different spectrophotometric platform windows. Window I; based on absorption spectrum zero order data manipulation using the newly developed extended absorbance difference (EAD). Window II; based on derivative spectra by second order derivative (D2) data manipulation. Window III; based on ratio spectra applying constant multiplication (CM) and absorptivity centering via factorized ratio difference spectrum (ACT-FSRΔP) methods data manipulation. Finally, window IV; based on derivative of ratio spectrum by virtue of first derivative of ratio spectral (DD1) method data manipulation. Calibration curves construction were over linearity range; 1.0-14.0 µg/mL for ALF. The proposed methods accuracy, precision, and linearity range were determined and validated as per ICH guidelines. Moreover, they were able to analyze ALF in raw form, dosage form and in existence of its oxidative degradation product. Statistical comparisons were done between the proposed methods and the reported one showing no significant difference concerning accuracy and precision. Furthermore, greenness profile assessment was accomplished by means of four metric tools; namely: analytical greenness (AGREE), green analytical procedure index (GAPI), analytical eco-scale, and national environmental method index (NEMI).

Novel solid-contact ion-selective electrode based on a polyaniline transducer layer for determination of alcaftadine in biological fluid.

Fabrication of a novel ion selective electrode for determining alcaftadine was achieved. The glassy carbon electrode (GCE) was utilized as a substrate in fabrication of an electrochemical sensor containing polyaniline (PANI) as an ion-to-electron transducer layer. A PVC polymeric matrix and nitrophenyl-octyl-ether were employed in designing the ion-sensing membrane (ISM). Potential stability was improved and minimization of electrical signal drift was achieved for inhibition of water layer formation at the electrode interface. Potential stability was achieved by inclusion of PANI between the electronic substrate and the ion-sensing membrane. The sensor's performance was evaluated following IUPAC recommendations. The sensor dynamic linear range was from 1.0 × 10-2 to 1.0 × 10-6 mol L-1 and it had a 6.3 × 10-7 mol L-1 detection limit. The selectivity and capabilities of the formed alcaftadine sensor were tested in the presence of its pharmaceutical formulation excipients as well as its degradation products. Additionally, the sensor was capable of quantifying the studied drug in a rabbit aqueous humor. Method's greenness profile was evaluated by the means of Analytical Greenness (AGREE) metric assessment tool.

Sustainable spectrophotometric determination of antihypertensive medicines reducing COVID-19 risk via paired wavelength data processing technique - Assessment of purity, greenness and whiteness.

Recent studies have reported that using certain antihypertensive therapies such as angiotensin II receptor blockers (ARBs) is associated with mitigation of fatal outcomes and enhancing clinical features of patients having hypertension during coronavirus pandemic. Thus, in the current work an innovative, effective, white and sustainable spectrophotometric technique called paired wavelength data processing technique (PWDPT) was developed for evaluation of recommended antihypertensive combination therapies incorporating candesartan cilexetil (CAN) and hydrochlorothiazide (HCT). This technique included three methods, namely, absorbance resolution (AR), amplitude resolution (PR) and ratio extraction (RE). Linearity ranges were (5.0 µg/mL - 50.0 µg/mL) and (2.0 µg/mL - 24.0 µg/mL) for CAN and HCT, respectively. Validation and confirmation of all suggested methods were conducted in accordance with ICH guidelines, producing satisfactory results within the accepted limits. Statistical comparison was achieved between the attained results from suggested methods and those attained from official methods, in which insignificant difference was existed. The suggested methods were successfully employed for identification of the studied drugs as well as determination of their spectral recognition and evaluation of the purity in their combined formulations. The proposed methods followed the principles of green analytical chemistry, where their greenness was evaluated and compared with the official potentiometric and HPLC methods via using four tools, namely, National Environmental Methods Index (NEMI), the Analytical Eco-Scale, the Green Analytical Procedure Index (GAPI) and Analytical greenness metric (AGREE) which affirmed the eco-friendly nature of the proposed methods. Moreover, studying the whiteness features was performed using the recently introduced RGB12 model. The acceptable results along with the sustainability, simplicity, affordability and low-cost of the proposed methods encourages their utilization in the quality control laboratories.

Eco-friendly spectrophotometric evaluation of triple-combination therapies in the treatment strategy of patients suffering from hypertension during coronavirus pandemic - Spectralprint recognition study.

Recent studies have reported that using certain antihypertensive therapies such as angiotensin II receptor blockers (ARBs) and calcium channel blocker (CCBs) is associated with reduction of fatal outcomes and improving clinical characteristics of patients suffering from hypertension during coronavirus pandemic. Thus, in the current work an effective, innovative and eco-friendly spectrophotometric manner namely, parent spectrum extraction (PSE)was established for evaluation of recommended triple antihypertensive combination therapies incorporate valsartan (VAL) as ARBs, amlodipine besylate as CCBs (AML) and hydrochlorothiazide (HCT)as diuretic into single-pill in challengeable ratio. PSE manner composed of two complementary steps, auxiliary resolution coupled with data analysis resolution(DAR)and it is characterized by resolving the spectral bands of the drugs and extraction of their discrete parent spectra (D0); accordingly, enabling determination of each analyte at its λmax. Auxiliary resolution of AML in triple mixture was applied to decrease complexity of overlapped spectra via constant multiplication (CM) followed by spectrum subtraction (SS) to obtain resolved mixture of VAL and HCT while data analysis resolution (DAR) of this binary mixture was applied via one of three novel methods namely, absorbance extraction (AE), peak-amplitude extraction (PE) and ratio extraction (RE) along with SS method. The proposed methods had analyzed VAL, AML and HCT in the range of 4.0-44.0 µg/mL, 4.0-40.0 µg/mL and 2.0-24.0 µg/mL, respectively with an excellent correlation coefficient (r ≥ 0.9999). Further, the proposed methods in PSR manner were validated as stated by ICH guidelines and it was found that accuracy and precision results are within the acceptable limit. The suggested procedures were effectively utilized for the concurrent quantification of VAL, AML and HCT in synthetic mixtures and tablets. The greenness of the proposed spectrophotometric methods was evaluated by National Environmental Methods Index (NEMI), the Analytical Eco-Scale, the Green Analytical Procedure Index (GAPI) and Analytical greenness metric (AGREE) where the four tools affirmed the eco-friendly nature of the proposed methods. A comparison between the outcomes of the studied methods with the official and reported ones was performed and no statistical difference was arisen between the methods regarding to accuracy and precision.The achieved results along with the simplicity, affordability and low-cost of the proposed methods recommended their appropriateness for the regular quality control examination and analysis of pure materials and pharmaceutical formulations as well as their applicability for the spectralprint recognition of the studied drugs.

Comparative Study of the Selectivity Power of Colorimetric Method Over Chromatographic Methods for the Analysis of Valaciclovir Hydrochloride.

BACKGROUND: Valaciclovir hydrochloride (VAL) is an essential antiviral prodrug used to cure various types of herpes. Analysis of VAL by different analytical techniques demonstrates a persuasive aspect that is favorable in quality control application. OBJECTIVE: This study describes a comparison between colorimetric and chromatographic (RP-high performance liquid chromatography (HPLC) and thin-layer chromatography (TLC)-densitometric) methods concerning selectivity and specificity for the determination of VAL in all possible degradation products (alkali- and acid-induced degradation products, namely aciclovir [ACI] and guanine [GUA], respectively) in their synthetic mixture and pharmaceutical formulations. METHOD: The colorimetric method was accomplished by forming a highly colored complex with ferric hydroxamate reagent measured at 493 nm in the concentration range (0.20-1.60 mg/mL). Both chromatographic methods were successfully applied using ultraviolet (UV) detection at 256 nm in the concentration range (2.00-5.00 µg/mL) for the RP-HPLC method and (10.00-900.00 ng/band) for the TLC-densitometric method. RESULTS: The linearity studies, regression equations, assay parameters, and validation sheet of the proposed colorimetric and chromatographic methods to determine VAL were obtained with highly acceptable values. CONCLUSIONS: The International Council for Harmonization (ICH) guidelines were followed to validate the described methods and the statistical comparison regarding both accuracy and precision, and satisfactory results were accomplished. HIGHLIGHTS: In this study, we configure a full comparative study between different analytical methods for the analysis of challengeable mixture containing the drug of interest, VAL, along with its degradation products, ACI and GUA.

Simultaneous determination of phenazopyridine HCl and trimethoprim in presence of phenazopyridine HCl impurity by univariate and multivariate spectrophotometric methods - Quantification of phenazopyridine HCl impurity by univariate methods.

Three univariate and two multivariate spectrophotometric methods were developed and subsequently validated to determine phenazopyridine HCl (PHZ) and trimethoprim (TMP) in the presence of 2,6-Diaminopyridine (2,6-DAP). The first univariate method depends on direct determination of phenazopyridine by measuring its absorbance at 412 nm and performed in concentration range of 1.00-10.00 µg/mL. Then the contribution of phenazopyridine is removed by dividing the mixture spectrum with PHZ divisor (5 µg/mL) after that the constant is mathematically subtracted and finally the generated spectrum is multiplied with the PHZ divisor. These steps eliminate PHZ contribution and the recovered spectrum is that of TMP and 2,6-DAP only where different methods can be applied to determine TMP and 2,6-DAP through this binary mixture spectrum. The first method to determine both components depends on measuring both TMP and 2,6-DAP through their first derivative (1DD) spectra at 244.70 and 259.60 nm for TMP and 2,6-DAP, respectively with concentration ranges of 4.00-24.00 µg/mL TMP and 4.00-26.00 µg/mL 2,6-DAP. The second method depends on application of the isoabsorptive method which was used for TMP determination at its isoabsorptive point with 2,6-DAP at 242.64 nm with concentration range 1.00-20.00 µg/mL for TMP. The developed univariate methods were successfully applied to determine PHZ, TMP and PHZ impurity (2,6-DAP). Two multivariate methods were applied for determination of PHZ and TMP in presence of 2,6-DAP namely, Principle Component Regression (PCR) and Partial Least Squares (PLS). The results of the two models show that simultaneous determination of PHZ and TMP in presence of PHZ impurity can be performed in the concentration ranges of 6.00-14.00 µg/mL PHZ and 24.00-56.00 µg/mL TMP. All the proposed methods were successfully applied to analyze PHZ and TMP in pharmaceutical formulations without interference from the dosage form additives and the results were statistically compared with the reported method.

Simultaneous Determination of Thalidomide and Dexamethasone in Rat Plasma by Validated HPLC and HPTLC With Pharmacokinetic Study.

Two validated chromatographic methods have been developed for the simultaneous determination of thalidomide (THD) and dexamethasone (DEX) in rat plasma using paracetamol (PAR) as an internal standard (IS). Chromatographic analysis was achieved firstly by HPLC method on C18 column (150 × 4.6 mm2 i.d., 5 µm) and a mobile phase composed of ethanol:water (containing 0.1% acetic acid) (70:30, v/v) at the flow rate of 0.6 mL min-1. The second method was HPTLC method which depended on using a developing system of methylene chloride:acetone:ethyl acetate (7:4:1, by volume). In both methods, PAR was used as an IS. The developed methods have been validated as per FDA guidelines. All parameters were tested using quality control samples (LQC, MQC and HQC). All the obtained parameters were within the acceptance criteria. In the same way, the two methods were successfully used to study the pharmacokinetic parameters of both THD and DEX after their intra-peritoneal administration. Moreover, results obtained after administration of each drug alone were compared to those obtained after their administration together. The drugs showed drug-drug interactions when administered in combination, meaning that monitoring of such combination is very important.

Simultaneous Determination of Aspirin, Dipyridamole and Two of Their Related Impurities in Capsules by Validated TLC-Densitometric and HPLC Methods.

Aspirin (ASP) and dipyridamole (DIP) are widely used as a combination in pharmaceutical formulations for treatment of strokes. Many of these formulations are containing tartaric acid as an excipient (in DIP pellets formulation for sustained release), which increases the probability of formation of dipyridamole tartaric acid ester impurity (DIP-I). On the other hand, salicylic acid (SAL) is considered to be one of the synthesis impurities and a degradation product of ASP. In this work, two chromatographic methods, namely, TLC-densitometry and HPLC, have been established and validated for simultaneous determination of ASP, DIP, SAL and DIP-I. Good separation was achieved by using silica gel as stationary phase and toluene-methanol-ethyl acetate (2:3:5, by volume) as mobile phase in the case of TLC-densitometry and Zorbax ODS column with mobile phase consisting of phosphate buffer (pH 3.3)-acetonitrile-triethylamine (40:60:0.03, by volume) for HPLC. Influence of different organic solvents in mobile phase composition has been studied to optimize the separation efficiency in TLC densitometry. Moreover, factors affecting the efficiency of HPLC, like pH of the buffer used, organic solvent ratio in the mobile phase and flow rate, have been carefully studied using one variable at a time approach. Finally, the proposed methods were validated as per ICH guidelines.

Validated UPLC and TLC-Densitometry Stability Indicating Methods for the Determination of Rafoxanide in the Presence of Its Degradation Products.

Two sensitive and accurate stability-indicating chromatographic methods were developed and validated for the determination of rafoxanide (RFX). Degradation products were identified by mass spectrometry and IR spectroscopy. The first is ultra-performance liquid chromatography method where separation was performed using acetonitrile:0.005 M potassium dihydrogen orthophosphate (pH 3.5) in a ratio of 80:20 by volume as a mobile phase using a Hypersil GOLD™ C8 column 1.9 mm (50 × 2.1 mm), UV detection was adjusted at 220 nm and the flow rate was 0.6 mL min-1. The other is a thin-layer chromatography-densitometry method where separation was achieved using a mobile phase composed of chloroform:ethyl acetate:toluene:ammonia (5:4:3:0.1 by volume) on silica gel 60 F254 plates, and densitometric detection was done at 280 nm. Validation was achieved as per the ICH guidelines. The proposed methods proved to be accurate, robust, specific and suitable for application as stability-indicating methods for routine analysis of RFX in quality control laboratories.

Chemometrics Tools in Detection and Quantitation of the Main Impurities Present in Aspirin/Dipyridamole Extended-Release Capsules.

Aspirin (ASP) and dipyridamole (DIP) in combination is widely used in the prevention of secondary events after stroke and transient ischemic attack. Salicylic acid is a well-known impurity of ASP, and the DIP extended-release formulation may contain ester impurities originating from the reaction with tartaric acid. UV spectral data analysis of the active ingredients in the presence of their main impurities is presented using multivariate approaches. Four chemometric-assisted spectrophotometric methods, namely, partial least-squares, concentration residuals augmented classical least-squares (CRACLS), multivariate curve resolution (MCR) alternating least-squares (ALS), and artificial neural networks, were developed and validated. The quantitative analyses of all the proposed calibrations were compared by percentage recoveries, root mean square error of prediction, and standard error of prediction. In addition, r(2) values between the pure and estimated spectral profiles were used to evaluate the qualitative analysis of CRACLS and MCR-ALS. The lowest error was obtained by the CRACLS model, whereas the best correlation was achieved using MCR-ALS. The four multivariate calibration methods could successfully be applied for the extended-release formulation analysis. The application results were also validated by analysis of the stored dosage-form solution, which showed a susceptibility of DIP esterification in the extended-release formulation. Statistical comparison between the proposed and official methods showed no significant difference.

Enhancing prediction power of chemometric models through manipulation of the fed spectrophotometric data: A comparative study.

Effect of data manipulation in preprocessing step proceeding construction of chemometric models was assessed. The same set of UV spectral data was used for construction of PLS and PCR models directly and after mathematically manipulation as per well known first and second derivatives of the absorption spectra, ratio spectra and first and second derivatives of the ratio spectra spectrophotometric methods, meanwhile the optimal working wavelength ranges were carefully selected for each model and the models were constructed. Unexpectedly, number of latent variables used for models' construction varied among the different methods. The prediction power of the different models was compared using a validation set of 8 mixtures prepared as per the multilevel multifactor design and results were statistically compared using two-way ANOVA test. Root mean squares error of prediction (RMSEP) was used for further comparison of the predictability among different constructed models. Although no significant difference was found between results obtained using Partial Least Squares (PLS) and Principal Component Regression (PCR) models, however, discrepancies among results was found to be attributed to the variation in the discrimination power of adopted spectrophotometric methods on spectral data.

Stability-indicating chromatographic methods for determination of flecainide acetate in the presence of its degradation products; isolation and identification of two of its impurities.

In this work, two stability-indicating chromatographic methods have been developed and validated for determination of flecainide acetate (an antiarrhythmic drug) in the presence of its degradation products (flecainide impurities; B and D). Flecainide acetate was subjected to a stress stability study including acid, alkali, oxidative, photolytic and thermal degradation. The suggested chromatographic methods included the use of thin layer chromatography (TLC-densitometry) and high-performance liquid chromatography (HPLC). The TLC method employed aluminum TLC plates precoated with silica gel G.F254 as the stationary phase and methanol-ethyl acetate-33% ammonia (3:7:0.3, by volume) as the mobile phase. The chromatograms were scanned at 290 nm and visualized in daylight by the aid of iodine vapor. The developed HPLC method used a RP-C18 column with isocratic elution. Separation was achieved using a mobile phase composed of phosphate buffer pH 3.3-acetonitrile-triethylamine (53:47:0.03, by volume) at a flow rate of 1.0 mL/min and UV detection at 292 nm. Factors affecting the efficiency of HPLC method have been studied carefully to reach the optimum conditions for separation. The developed methods were validated according to the International Conference on Harmonization guidelines and were applied for bulk powder and dosage form. Copyright © 2016 John Wiley & Sons, Ltd.

Stability-indicating spectrophotometric methods for determination of the anticoagulant drug apixaban in the presence of its hydrolytic degradation product.

Apixaban (a novel anticoagulant agent) was subjected to a stress stability study including acid, alkali, oxidative, photolytic, and thermal degradation. The drug was found to be only liable to acidic and alkaline hydrolysis. The degradation product was then isolated and identified by IR and GC-mass spectrometry. Four spectrophotometric methods, namely; first derivative (D(1)), derivative ratio (DR), ratio difference (RD) and mean centering of ratio spectra (MCR), have been suggested for the determination of apixaban in presence of its hydrolytic degradation product. The proposed methods do not require any preliminary separation step. The accuracy, precision and linearity ranges of the proposed methods were determined, and the methods were validated as per ICH guidelines and the specificity was assessed by analyzing synthetic mixtures containing different percentages of the degradation product with the drug. The developed methods were successfully applied for the determination of apixaban in bulk powder and its tablet dosage form.

Spectrofluorimetric determination of 3-methylflavone-8-carboxylic acid, the main active metabolite of flavoxate hydrochloride in human urine.

A simple, sensitive and selective spectrofluorimetric method has been developed for the determination of 3-methylflavone-8-carboxylic acid as the main active metabolite of flavoxate hydrochloride in human urine. The proposed method was based on the measurement of the native fluorescence of the metabolite in methanol at an emission wavelength 390 nm, upon excitation at 338 nm. Moreover, the urinary excretion pattern has been calculated using the proposed method. Taking the advantage that 3-methylflavone-8-carboxylic acid is also the alkaline degradate, the proposed method was applied to in vitro determination of flavoxate hydrochloride in tablets dosage form via the measurement of its corresponding degradate. The method was validated in accordance with the ICH requirements and statistically compared to the official method with no significant difference in performance.

Validated stability indicating RP-HPLC for quantitation of nitazoxanide in presence of its alkaline degradation products and their characterization by HPLC-tandem mass spectrometry.

A simple and sensitive stability indicating HPLC method was developed and validated for quantitative determination of Nitazoxanide (NTZ), a new antiprotozoal drug, in presence of degradation products generated under forced alkaline hydrolysis. Chromatographic separation was achieved on Inertsil C8-3 column (150 × 4.6 mm i.d.) using a mobile phase composed of acetonitrile: 50 mM ammonium acetate buffer (50:50, v/v, pH 5.0 adjusted with acetic acid) at a flow rate of 1 mL/min. Quantification was achieved with UV detection at 298 nm based on relative peak area. The method was linear over the concentration range of 0.8-50 µg/mL (r = 0.9999) with a limit of detection and quantification 0.0410 and 0.1242 µg/mL, respectively. The developed method has the requisite accuracy, selectivity, sensitivity and precision to assay NTZ in presence of its degradation products either in bulk powder or in pharmaceutical formulations. The degradation products were then identified by HPLC-MS/MS analysis using an electrospray ionization source and an ion trap analyzer.