Global scholarly output on orthodontic temporary anchorage devices (TADs): A silver jublee scientometric analysis.

OBJECTIVES: This study aimed to analyze the global scholarly production of articles related to temporary anchorage devices (TADs) from 1998-2023 in peer-reviewed dental journals indexed in the Web of Science. MATERIALS AND METHODS: A database of TADs-related articles was created via a Web of Sciences structured search. The bibliometric characteristics of the studies, including the number of citations, publication year, journal title, journal impact factor (IF), authorship, contributing institutions and countries, thematic field, and study design, were extracted. Keyword co-occurrence network analyses and the correlation between the number of citations and the article age, journal IF, and journal quartile of each article were performed. RESULTS: The top 50 cited articles were published from 1999-2016, and the total number of citations ranged from 82-602, with 160.36 citations/paper on average. Most of the articles originated from Japan (n = 12), with the most remarkable contributions from Nihon and Okayama Universities, Japan (n = 5, each). The American Journal of Orthodontics and Dentofacial Orthopedics had the most cited articles, with 196.57 citations/paper on average. A significant positive correlation occurred between the number of citations and publication age (rho = 0.392, P = 0.005). CONCLUSION: Our scientometric analysis reported the characteristics of TADs-related articles published over 25 years. Most highly-cited articles were published between 2005 and 2008. The positive correlation between articles' publication date and the number of citations might impact the top 50 within the next 5-10 years.

Evaluating free segmentation tools for CBCT-derived models: Cost-effective solutions.

OBJECTIVES: This study evaluated the segmentation accuracy and reliability of free software packages and compared them with commercial alternatives. MATERIAL AND METHODS: A total of 36 stone models were scanned using a desktop scanner and then imaged by cone beam computed tomography (CBCT). The CBCT volumes were segmented using 2 free software packages (3D Slicer and Blue Sky Plan) and 2 commercial software packages (Mimics and OnDemand3D). Stereolithography (STL) files generated by the desktop scanner were used as the control group (reference models). The accuracy of segmentation was evaluated by (1) comparing 6 linear measurements taken from each STL model generated by the 4 software packages with that obtained by the scanner, and (2) deviation analysis of each STL model generated by the 4 software packages with that obtained by the scanner. Absolute error and percentage error, repeated measures anova and Friedman test followed by post hoc analysis, intraclass correlation coefficient (ICC), and Pearson's r were used to evaluate the accuracy of the tested software packages. RESULTS: There was no statistically significant difference in all intra-arch measurements obtained using the four software packages. Measurements obtained using the free software packages and the scanner showed excellent positive correlation, ranging from 0.825 to 0.988, confirming equivalence with commercial software packages. CONCLUSION: Within the settings of the current study, accurate and time-saving segmentations with high positive correlation could be performed using the tested free segmentation software packages (3D Slicer and Blue Sky Plan). Nevertheless, further evaluation is necessary to gage their accuracy using different CBCT modalities.

#clearaligners and social media: An in-depth analysis of clear aligners' content on Instagram.

BACKGROUND AND OBJECTIVES: Clear aligners-related posts are popularized on social media platforms to educate patients and peers and to market aligners in dental practices. This study aimed to characterize the account credentials and content of the top-performing posts to understand the spread of clear aligners-related information on Instagram. MATERIALS AND METHODS: This cross-sectional web-based study analysed 13 Instagram clear aligners-related hashtags. Content analysis was performed for the "Top 10 posts" listed under the "Top" section for each hashtag within Instagram, as sorted by Instagram's algorithm. Data were analysed for the poster's background, credentials, role, post format, content, and engagement level ratio. Duplicate posts and those not relevant to clear aligners were excluded. Quantitative and qualitative analyses of the collected data were conducted. RESULTS: A total of 29 192 596 posts mentioned the selected hashtags, of which 130 posts were screened in this study. Most posts were authored by dentists (n = 84), 79.8% of them were orthodontic specialists. Self-promotional posts comprised 90.2%, while educational posts accounted for only 8.9%. Interestingly, the number of likes and comments received on posts by patients (n = 19, median = 112, IQR = 340) was significantly higher than those posted by dentists (n = 84, median = 93, IQR = 81.75) (P = .004). CONCLUSION: More than 29 million posts about clear aligners were identified on Instagram. Orthodontists are the leading authors of aligners hashtags. However, the majority of the posts are self-promotional and have nonfactual information. Social media awareness among orthodontic specialists may help provide more evidence-based content about clear aligners and can act as an interactive networking and health communication platform.

Altering maternal calcium and phosphorus dietary intake induces persistent sex-specific changes in the dentition of the offspring.

BACKGROUND: The maternal diet is essential to offspring development, but the specific effects on tooth morphology are still unknown. The aim of this study was to evaluate the effects of altering maternal calcium (Ca) and phosphorus (P) supplementation during gestation and lactation on offspring dentition. METHODS: Pregnant mice were fed an experimental diet containing a threefold increase in Ca and a threefold decrease in P compared to the standard mouse chow diet at embryonic Day 0.5 (E0.5). Offspring mice were maintained on standard or experimental diets from post-natal Day 0 to weaning, then fed control diets until 6 weeks of age. Six-week-old offspring heads were collected and scanned using micro-computed tomography. Dental morphometrics of offspring maxillary and mandibular first and third molars (n = 5-6 per diet/per sex) were determined. A two-way ANOVA test was employed to verify the existence of any significant differences between groups. The significance level was set at P < .05. RESULTS: A two-way ANOVA revealed a statistically significant interaction between the effects of diet and sex on the upper and lower dentition. Moreover, experimental diet-fed female offspring exhibited smaller molars with shorter mesiodistal width and larger pulp chambers relative to controls, while experimental diet-fed male offspring possessed larger molars with wider mesiodistal width and smaller pulp chambers. CONCLUSION: Our findings reveal that altering the maternal and offspring dietary Ca:P ratio during gestation, lactation and weaning led to significant, sex-specific changes in the offspring dentition. The differences in dentition appeared to be correlated with the sex-specific changes in the craniofacial skeleton.

Erosive tooth wear and salivary parameters among competitive swimmers and non-swimmers in Egypt: a cross-sectional study.

INTRODUCTION: Competitive swimmers spend considerable time practicing their sport. Prolonged exposure to chlorinated water can alter salivary parameters and might compromise oral health. This study aimed to determine erosive tooth wear status and its related risk factors among competitive swimmers as compared to non-swimmers. MATERIALS AND METHODS: A cross-sectional study consisting of 180 athletes (90 competitive swimmers versus 90 competitive rowers "non-swimmers") was conducted. Participants were interviewed on the common erosion risk factors. The Basic Erosive Wear Examination system was used to assess the status of erosive tooth wear. Stimulated saliva sample was collected before and after a training session and pool pH was evaluated using pH strips for 7 days. Data were analyzed using descriptive statistics and multivariable analysis. RESULTS: The prevalence of dental erosion was significantly higher among competitive swimmers (60%) with higher BEWE scores compared to non-swimmers (25.6%). The salivary flow rate was reduced significantly after training sessions in both groups while salivary pH increased among swimmers. Evaluation of pool water revealed a continuous reduction in the pH level, reaching a very acidic pH level of 3.24. CONCLUSION: Erosive tooth wear is more prevalent among competitive swimmers. Years of practice and regular consumption of acidic drinks increase the odds of developing erosive lesions. A high incidence of erosive lesions may be attributed to a reduction in swimming pool pH level. Salivary parameters showed variations between groups after training sessions.

Articaine versus Lidocaine in only buccal infiltration anesthesia for the extraction of mandibular anterior teeth. A prospective split-mouth randomized-controlled clinical study.

OBJECTIVE: To investigate the effectiveness of a single labial infiltration of 4% articaine versus 2% lidocaine for the extraction of mandibular anterior teeth without an additional lingual injection. PATIENTS AND METHODS: A prospective, randomized-controlled, split-mouth clinical study was implemented. Healthy adult patients seeking bilateral extraction of mandibular anterior teeth were included in this study. Teeth extractions were randomly assigned to two equal groups, where one mandibular anterior tooth was extracted using a solitary labial infiltration of either 4% articaine (the study group) or 2% lidocaine (the control group). After 14 days, the other mandibular anterior tooth was extracted using the other local anesthetic agent. The selection of the anesthetic agent injected in the first session was done in a randomized fashion. After 5 min of local anesthetic injection, the tooth was extracted, and each patient was asked to record the intensity of the extraction pain using the Visual Analogue Scale (VAS). RESULTS: Thirty-one patients were included in the study. The efficacy of a single labial injection for mandibular anterior teeth extraction was established by the fact that none of the patients in the study or control group required re-administration of local anesthesia. The mean VAS for pain control during tooth extraction was 1.16 ± 0.93 for the articaine group and 1.71 ± 0.90 for the lidocaine group. The pain score showed a statistically significant decrease in the articaine group compared to that in the lidocaine group (P = 0.017). CONCLUSION: Although the anesthetic effects of only buccal infiltration of 4% articaine and 2% lidocaine for extraction of mandibular anterior teeth were comparable, the use of 4% articaine would have more effective and predictable outcomes. CLINICALTRIALS: ORG: (ID: NCT05223075) 3/2/2022.

Accuracy of virtual surgical planning in mandibular reconstruction: application of a standard and reliable postoperative evaluation methodology.

OBJECTIVE: The purpose of this study was to determine the accuracy of virtual surgical planning for mandibular reconstruction, along with the implementation of a postoperative evaluation methodology. MATERIALS AND METHODS: The study is a prospective case series for computer-assisted mandibular reconstruction surgery. Analysis of the degree of agreement between virtual measurements and postoperative actual outcomes was performed. The reliability of the proposed evaluation methodology was assessed and analyzed using the Inter-Class Coefficient (ICC) test. Statistical significance was set at the 5% level. RESULTS: Nine consecutive patients were selected. The analysis of all angular and linear parameters reported a highly statistically significant degree of agreement between the preoperative and postoperative measurements (P < 0.001). Furthermore, an extreme degree of reliability was reported when the evaluation methodology was scrutinized (ICC = 0.9). CONCLUSION: The excellent degree of agreement between the virtual plan and the actual outcome reported in this study validated the surgical accuracy of virtually assisted mandibular reconstruction. This study pointed out the reliability and reproducibility of the standardized evaluation protocol in an attempt to obtain a tolerable value for the acceptable postoperative results regarding the accuracy of computer-assisted surgery.