Towards lithium-free solid-state batteries with nanoscale Ag/Cu sputtered bilayer electrodes.

Enhancing the reversible Li growth efficiency in "Li-free" solid-state batteries is key for the deployment of this technology. Here, we demonstrate a nanoscale material design path that enables the reversible cycling of a lithium-free solid-state battery, using Li7La3Zr2O12 (LLZO) electrolyte. By means of nanometric Ag-Cu bilayers, directly sputtered onto the LLZO, we can effectively control Li deposition. The robust thin film bilayer, which is compatible with LLZO, enables stable cycling, accommodating the volume changes without the need for extra external pressure.

Entropy-Stabilized Oxides owning Fluorite Structure obtained by Hydrothermal Treatment.

Entropy-Stabilized Oxides (ESO) is a modern class of multicomponent advanced ceramic materials with attractive functional properties. Through a five-component oxide formulation, the configurational entropy is used to drive the phase stabilization over a reversible solid-state transformation from a multiphase to a single-phase state. In this paper, a new transition metal/rare earth entropy-stabilized oxide, with composition Ce0.2Zr0.2Y0.2Gd0.2La0.2O2-, was found after several investigations on alternative candidate systems. X-Ray Diffraction (XRD) analyses of calcined powders pointed out different behavior as a function of the composition and a single-phase fluorite structure was obtained after a specific thermal treatment at 1500 °C. Powders presented the absence of agglomeration, so that the sintered specimen exhibited sufficient densification with a small porosity, uniformly distributed in the sample.

Gd/Sm-Pr Co-Doped Ceria: A First Report of the Precipitation Method Effect on Flash Sintering.

In this work, ceria-based ceramics with the composition Gd0.14Pr0.06Ce0.8O2-δ and Sm0.14Pr0.06Ce0.8O2-δ, were synthesized by a simple co-precipitation process using either ammonium carbonate or ammonia solution as a precipitating agent. After the calcination, all of the produced samples were constituted by fluorite-structured ceria only, thus showing that both dopant and co-dopant cations were dissolved in the fluorite lattice. The ceria-based nanopowders were uniaxially compacted and consequently flash-sintered using different electrical cycles (including current-ramps). Different results were obtained as a function of both the adopted precipitating agent and the applied electrical cycle. In particular, highly densified products were obtained using current-ramps instead of "traditional" flash treatments (with the power source switching from voltage to current control at the flash event). Moreover, the powders that were synthesized using ammonia solution exhibited a low tendency to hotspot formation, whereas the materials obtained using carbonates as the precipitating agent were highly inhomogeneous. This points out for the first time the unexpected relevance of the precipitating agent (and of the powder shape/degree of agglomeration) for the flash sintering behavior.

Controlled Coprecipitation of Amorphous Cerium-Based Carbonates with Suitable Morphology as Precursors of Ceramic Electrolytes for IT-SOFCs.

To be suitable as electrolytes in intermediate temperature solid oxide fuel cell (IT-SOFC), ceramic precursors have to be characterized by high sintering aptitude for producing fully densified products which are needed for this kind of application. Therefore, synthesis processes able to prepare highly reactive powders with low costs are noteworthy to be highlighted. It has been shown that amorphous coprecipitates based on cerium doped (and codoped) hydrated hydroxycarbonates can lead to synthesized ceramics with such desired characteristics. These materials can be prepared by adopting a simple coprecipitation technique using ammonium carbonate as precipitating agent. As a function of both the molar ratio between carbonate anions and total metallic cations, and the adopted mixing speed, the coprecipitate can be either amorphous, owning a very good morphology, or crystalline, owning worse morphology, packing aptitude, and sinterability. The amorphous powders, upon a mild calcination step, gave rise to the formation of stable solid solutions of fluorite-structured ceria maintaining the same morphology of the starting powders. Such calcined powders are excellent precursors for sintering ceramic electrolytes at low temperatures and with very high electrical conductivity in the intermediate temperature range (i.e., 500⁻700 °C). Therefore, irrespective of the actual composition of ceria-based systems, by providing an accurate control of both chemical conditions and physical parameters, the coprecipitation in the presence of ammonium carbonate can be considered as one of the most promising synthesis route in terms of cost/effectiveness to prepare excellent ceramic precursors for the next generation of IT-SOFC solid electrolytes.

Effect of the mineralizer solution in the hydrothermal synthesis of gadolinium-doped (10% mol Gd) ceria nanopowders.

BACKGROUND: Gadolinium-doped ceria is an attractive electrolyte material for potential application in solid oxide fuel cells (SOFCs) operating at intermediate temperatures typically with 10%-20% substitution of Ce+4 by Gd+3. In particular, 10% gadolinium-doped ceria seems to have the highest values of conductivities among the other dopant compositions. METHODS: Nanosized powders of gadolinium-doped ceria were prepared by hydrothermal treatment using coprecipitate as a precursor and in the presence of 3 different mineralizer solutions. The powders obtained were characterized by X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy and thermal analysis, while the electrical behavior of the corresponding pellets were ascertained by AC impedance spectroscopy. RESULTS: Nanocrystalline gadolinium-doped ceria powders with fluorite cubic crystal structure were obtained by hydrothermal treatment. Independent of the mineralizer used, these powders were able to produce very dense ceramics, especially when selecting an optimized sintering cycle. In contrast, the electrical behavior of the samples was influenced by the mineralizer solution, and the samples synthesized in the neutral and alkaline solutions showed higher values of electrical conductivity, in the range of temperatures of interest. CONCLUSIONS: By the coprecipitation method, it has been possible to synthesize nanosized gadolinium-doped cerium oxide in a fluorite structure, stable in a wide range of temperatures. Hydrothermal treatment directly on the as-synthesized coprecipitates, without any drying step, had a very positive effect on the powders, which can be sintered with a high degree of densification, especially with an optimized sintering cycle. Furthermore, the electrical behavior of these samples was very interesting, especially for the samples synthesized using neutral mineralizer solution and basic mineralizer solution.

Electrical and microstructural characterization of ceramic gadolinium-doped ceria electrolytes for ITSOFCs by sol-gel route.

BACKGROUND: Gadolinium-doped ceria (GDC) is a promising alternative as a solid electrolyte for intermediate temperature solid oxide fuel cells (ITSOFCs) due to its low operating temperature and its high electrical conductivity. The traditional synthesis processes require extended time for powder preparation. Sol-gel methodology for electrolyte fabrication is more versatile and efficient. METHODS: In this work, nanocrystalline ceria powders, with 10 and 20 mol% of gadolinium (Ce0.9Gd0.1O1.95 and Ce0.8Gd0.2O1.9) were synthesized by a modified sol-gel technique, featuring a nitrate-fuel exothermic reaction. GDC tablets were prepared from powders and sintered at 1500°C with a dwell time of 3 hours. The sintered pellets' microstructure (by SEM) and electrical conductivity (by EIS) were evaluated. The powder properties, such as crystalline structure (by XRD), thermal properties (TGA/DTA), particle size and morphology (TEM) and textural properties (BET method) were determined and, in addition, for the first time an accurate chemical structural evolution (FTIR) was studied. RESULTS: Sintered GDC0.8 samples exhibited the maximum theoretical density of 97% and an average grain size of 700 nm. The electrical conductivity vs. temperature showed values ranging from 1.9∙10(-2) to 5.5∙10(-2) S·cm(-1) at 600°C and 800°C for GDC with 20 mol% of gadolinium. CONCLUSIONS: The methodology investigated showed reduced reaction time, a better control of stoichiometry and low cost. Characterization results demonstrated that these materials can be applied in ITSOFCs due to high conductivity, even at 550°C-600°C. The increased conductivity is related to the improved mobility of gadolinium ions in a high-density structure, with nanometric grains.

Diffuse Reflectance Infrared Fourier Transform Spectroscopy for the Determination of Asbestos Species in Bulk Building Materials.

Diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy is a well-known technique for thin film characterization. Since all asbestos species exhibit intense adsorptions peaks in the 4000-400 cm-1 region of the infrared spectrum, a quantitative analysis of asbestos in bulk samples by DRIFT is possible. In this work, different quantitative analytical procedures have been used to quantify chrysotile content in bulk materials produced by building requalification: partial least squares (PLS) chemometrics, the Linear Calibration Curve Method (LCM) and the Method of Additions (MoA). Each method has its own pros and cons, but all give affordable results for material characterization: the amount of asbestos (around 10%, weight by weight) can be determined with precision and accuracy (errors less than 0.1).