The neuroanatomy and pneumaticity of Hamadasuchus (Crocodylomorpha, Peirosauridae) from the Cretaceous of Morocco and its paleoecological significance for altirostral forms.

We describe the endocranial structures of Hamadasuchus, a peirosaurid crocodylomorph from the late Albian-Cenomanian Kem Kem group of Morocco. The cranial endocast, associated nerves and arteries, endosseous labyrinths, and cranial pneumatization, as well as the bones of the braincase of a new specimen, are reconstructed and compared with extant and fossil crocodylomorphs, which represent different lifestyles. Cranial bones of this specimen are identified as belonging to Hamadasuchus, with close affinities with Rukwasuchus yajabalijekundu, another peirosaurid from the 'middle' Cretaceous of Tanzania. The endocranial structures are comparable to those of R. yajabalijekundu but also to baurusuchids and sebecids (sebecosuchians). Paleobiological traits of Hamadasuchus, such as alert head posture, ecology, and behavior are explored for the first time, using quantitative metrics. The expanded but narrow semi-circular canals and enlarged pneumatization of the skull of Hamadasuchus are linked to a terrestrial lifestyle. Continuing work on the neuroanatomy of supposedly terrestrial crocodylomorphs needs to be broadened to other groups and will allow to characterize whether some internal structures are affected by the lifestyle of these organisms.

Ontogenetic variability of the intertympanic sinus distinguishes lineages within Crocodylia.

The phylogenetic relationships within crown Crocodylia remain contentious due to conflicts between molecular and morphological hypotheses. However, morphology-based datasets are mostly constructed on external characters, overlooking internal structures. Here, we use 3D geometric morphometrics to study the shape of the intertympanic sinus system in crown crocodylians during ontogeny, in order to assess its significance in a taxonomic context. Intertympanic sinus shape was found to be highly correlated with size and modulated by cranial shape during development. Still, adult sinus morphology distinguishes specimens at the family, genus and species level. We observe a clear distinction between Alligatoridae and Longirostres, a separation of different Crocodylus species and the subfossil Malagasy genus Voay, and a distinction between the Tomistoma and Gavialis lineages. Our approach is independent of molecular methods but concurs with the molecular topologies. Therefore, sinus characters could add significantly to morphological datasets, offering an alternative viewpoint to resolve problems in crocodylian relationships.

X-ray Tomography Coupled with Finite Elements, A Fast Method to Design Aerogel Composites and Prove Their Superinsulation Experimentally.

Composite aerogels can include fibers, opacifiers and binders but are rarely designed and optimized to achieve the best thermal/mechanical efficiency. This paper proposes a three-dimensional X-ray tomography-based method for designing composites. Two types of models are considered: classical and inexpensive homogenization models and more refined finite element models. XrFE is based on the material's real three-dimensional microstructure and/or its twin numerical microstructure, and calculates the effective conductivity of the material. First, the three-dimensional sample is meshed and labeled. Then, a finite element method is used to calculate the heat flow in the samples. The entire three-dimensional microstructure of a real or fictitious sample is thus associated with a heat flow and an effective conductivity. Parametric studies were performed to understand the relationship between microstructure and thermal efficiency. They highlighted how quickly a low volume fraction addition can improve or ruin thermal conductivity. A reduced set of three formulations was developed and fully characterized. The mechanical behavior was higher than 50 KPa, with thermal efficiencies ranging from 14 to 15 mW·m·K−1.

The neuroanatomy of Zulmasuchus querejazus (Crocodylomorpha, Sebecidae) and its implications for the paleoecology of sebecosuchians.

The endocranial structures of the sebecid crocodylomorph Zulmasuchus querejazus (MHNC 6672) from the Lower Paleocene of Bolivia are described in this article. Using computed tomography scanning, the cranial endocast, associated nerves and arteries, endosseous labyrinths, and cranial pneumatization are reconstructed and compared with those of extant and fossil crocodylomorphs, representative of different ecomorphological adaptations. Z. querejazus exhibits an unusual flexure of the brain, pericerebral spines, semicircular canals with a narrow diameter, as well as enlarged pharyngotympanic sinuses. First, those structures allow to estimate the alert head posture and hearing capabilities of Zulmasuchus. Then, functional comparisons are proposed between this purportedly terrestrial taxon, semi-aquatic, and aquatic forms (extant crocodylians, thalattosuchians, and dyrosaurids). The narrow diameter of the semicircular canals but expanded morphology of the endosseous labyrinths and the enlarged pneumatization of the skull compared to other forms indeed tend to indicate a terrestrial lifestyle for Zulmasuchus. Our results highlight the need to gather new data, especially from altirostral forms in order to further our understanding of the evolution of endocranial structures in crocodylomorphs with different ecomorphological adaptations.

Influence of artificial aging on mechanical properties of commercially and non-commercially available zirconia dental implants.

OBJECTIVE: To evaluate the effect of artificial aging on the mechanical resistance and micromechanical properties of commercially and noncommercially available zirconia dental implants. METHODS: Scanning electron microscopy (SEM) and X-ray computed tomography (X-CT) were performed on implant systems including: Z-systems®, Straumann®, Zibone® and commercially and non-commercially available TAV dental® with varying grain sizes. Accelerated aging was performed at 134 °C and 2-bar pressure for 30 hours. Before and after aging, the mechanical load to failure was investigated and the bending moments were calculated. Nanoindentation responses of the representative Zibone implant before and after aging were performed to evaluate the effects of aging on hardness (H) and Young's modulus (E). A two-sample t-test statistical analysis was used to determine significant differences of bending moments within groups. RESULTS: All implants presented with compact and homogenous core structures without porosities. The bending moment was significantly increased after aging for all groups (P ≤ 0.05) except for Z-systems (significant decrease (P = 0.022)) and TAV group 3 (no significant increase (P = 0.181)). The increase in bending moment was less pronounced with increasing grain size in TAV groups (group 1: P = 0.036, group 2: P = 0.05, group 3: P = 0.18). E and H were reduced approximately 32% and 18% respectively following aging within the transformed, microcracked zone of the presentative Zibone implant. CONCLUSIONS: Aging led to both increase and decrease of the mechanical properties of the implant systems analyzed. The apparent contrast amongst groups can be explained based on differences in grain sizes and surface features. Aging decreased micromechanical properties of one implant system which warrants further investigation.

Polymerization shrinkage of resin-based composites for dental restorations: A digital volume correlation study.

OBJECTIVE: Resin-based composites are widely used in dental restorations; however, their volumetric shrinkage during polymerization leads to several issues that reduce the restoration survival rates. For overcoming this problem, a deep study of shrinkage phenomena is necessary. METHODS: In this study, micro-tomography (µ-CT) is combined with digital volume correlation (DVC) to investigate the effect of several factors on the polymerization strain of dental composites in model cavities: the presence/absence of an adhesive, the use of transparent/blackened cavities, and irradiation times between 1 and 40s. RESULTS: The results indicate that the presence of an adhesive at the interface between the cavity and composite does not reduce the total strain but instead limits it to a preferential direction. In addition, regardless of the conditions, the main strain is generated along the axis parallel to the polymerization irradiation (the vertical axis). Finally, the total strain appears to occur in the first 5s of irradiation, with no further evolution observed for longer irradiation times. SIGNIFICANCE: This work provides new insight into resin-based composite shrinkage and demonstrates the benefit of coupling DVC and µ-CT to better understand the degradation mechanisms of these materials.

Role of Hydrogen-Charging on Nucleation and Growth of Ductile Damage in Austenitic Stainless Steels.

Hydrogen energy is a possible solution for storage in the future. The resistance of packaging materials such as stainless steels has to be guaranteed for a possible use of these materials as containers for highly pressurized hydrogen. The effect of hydrogen charging on the nucleation and growth of microdamage in two different austenitic stainless steels AISI316 and AISI316L was studied using in situ tensile tests in synchrotron X-ray tomography. Information about damage nucleation, void growth and void shape were obtained. AISI316 was found to be more sensitive to hydrogen compared to AISI316L in terms of ductility loss. It was measured that void nucleation and growth are not affected by hydrogen charging. The effect of hydrogen was however found to change the morphology of nucleated voids from spherical cavities to micro-cracks being oriented perpendicular to the tensile axis.

Assessment of X-ray Computed Tomography to characterize filtering media from Vertical Flow Treatment Wetlands at the pore scale.

Computed Tomography is a non-destructive technique often used in earth sciences for the description of porous media at the pore scale. This paper shows the feasibility of this technique to obtain 3D descriptions of filtering media in Vertical Flow Treatment Wetlands (VFTW). Three different samples from two full-scale VFTW were scanned. The samples vary in moisture content and gravel size distribution. The 3D images show three characteristic phases of unsaturated media: voids, fouling material and gravel. The gray contrast level is good enough to perform phase segmentation successfully using region growing algorithms. In this study the results from segmentation are used (i) to compute profiles of phase volume fraction and specific surface at high resolution, (ii) to observe 3D distribution of isolated elements, (iii) and to draw the void's skeleton and to perform a percolation pathway study. This method highlights the presence of a transition zone between the deposit cake and the dense gravel layer. In this zone, mechanical interactions between gravels and filtered solids tend to promote a heterogeneous layer of gravel, fouling material and open porosity. The presence of isolated gravels in the deposit layer is clearly evidenced. The effect of drying to enhance the contrast between phases has been analyzed for one sample by a direct comparison of images obtained before and after drying. The resulting opening of the void phase tends to increase significantly the void-fouling material specific surface and the number and size of percolating pathways computed as the skeleton of the void phase. Finally, a first analysis of filtration processes is proposed. It consists in analyzing the percolation pathways for a class of void size by applying the distance map and skeleton concepts to the void phase.

Two-Scale Tomography Based Finite Element Modeling of Plasticity and Damage in Aluminum Foams.

In this study, finite element (FE) modeling of open-cell aluminum foams in tension was performed based on laboratory X-ray tomography scans of the materials at two different scales. High-resolution stitching tomography of the initial state allowed local intermetallic particles to be distinguished from internal defects in the solid phase of the foam. Lower-resolution scans were used to monitor the deformation and fracture in situ during loading. 3D image-based FE models of the foams were built to simulate the tensile behavior using a new microstructure-informed Gurson⁻Tvergaard⁻Needleman model. The new model allows quantitative consideration of the local presence of brittle intermetallic particles in the prediction of damage. It performs well in the discrimination of potential fracture zones in the foam, and can be easily adapted to any type of architectured material where both the global architecture and local microstructural details should be taken into account in the prediction of damage behavior.

Revealing the Effect of Local Connectivity of Rigid Phases during Deformation at High Temperature of Cast AlSi12Cu4Ni(2,3)Mg Alloys.

The 3D microstructure and its effect on damage formation and accumulation during tensile deformation at 300 °C for cast, near eutectic AlSi12Cu4Ni2Mg and AlSi12Cu4Ni3Mg alloys has been investigated using in-situ synchrotron micro-tomography, complemented by conventional 2D characterization methods. An increase of Ni from 2 to 3 wt.% leads to a higher local connectivity, quantified by the Euler number χ, at constant global interconnectivity of rigid 3D networks formed by primary and eutectic Si and intermetallics owing to the formation of the plate-like Al-Ni-Cu-rich δ-phase. Damage initiates as micro-cracks through primary Si particles agglomerated in clusters and as voids at matrix/rigid phase interfaces. Coalescence of voids leads to final fracture with the main crack propagating along damaged rigid particles as well as through the matrix. The lower local connectivity of the rigid 3D network in the alloy with 2 wt.% Ni permits localized plastification of the matrix and helps accommodating more damage resulting in an increase of ductility with respect to AlSi12Cu4Ni3Mg. A simple load partition approach that considers the evolution of local connectivity of rigid networks as a function of strain is proposed based on in-situ experimental data.

On the Potential of Bulk Metallic Glasses for Dental Implantology: Case Study on Ti40Zr10Cu36Pd14.

Ti40Zr10Cu36Pd14 Bulk Metallic Glass (BMG) appears very attractive for future biomedical applications thanks to its high glass forming ability, the absence of toxic elements such as Ni, Al or Be and its good mechanical properties. For the first time, a complete and exhaustive characterization of a unique batch of this glassy alloy was performed, together with ISO standard mechanical tests on machined implant-abutment assemblies. The results were compared to the benchmark Ti-6Al-4V ELI (Extra-Low-Interstitial) to assess its potential in dental implantology. The thermal stability, corrosion and sterilization resistance, cytocompatibility and mechanical properties were measured on samples with a simple geometry, but also on implant-abutment assemblies' prototypes. Results show that the glassy alloy exhibits a quite high thermal stability, with a temperature range of 38 °C between the glass transition and crystallization, a compressive strength of 2 GPa, a certain plastic deformation (0.7%), a hardness of 5.5 GPa and a toughness of 56 MPa.√m. Moreover, the alloy shows a relatively lower Young's modulus (96 GPa) than the Ti-6Al-4V alloy (110-115 GPa), which is beneficial to limit bone stress shielding. The BMG shows a satisfactory cytocompatibility, a high resistance to sterilization and a good corrosion resistance (corrosion potential of -0.07 V/SCE and corrosion current density of 6.0 nA/cm²), which may ensure its use as a biomaterial. Tests on dental implants reveal a load to failure 1.5-times higher than that of Ti-6Al-4V and a comparable fatigue limit. Moreover, implants could be machined and sandblasted by methods usually conducted for titanium implants, without significant degradation of their amorphous nature. All these properties place this metallic glass among a promising class of materials for mechanically-challenging applications such as dental implants.

Climate-Dependent Heat-Triggered Opening Mechanism of Banksia Seed Pods.

Heat-triggered fruit opening and delayed release of mature seeds are widespread among plants in fire-prone ecosystems. Here, the material characteristics of the seed-containing follicles of Banksia attenuata (Proteaceae), which open in response to heat frequently caused by fire, are investigated. Material analysis reveals that long-term dimensional stability and opening temperatures of follicles collected across an environmental gradient increase as habitats become drier, hotter, and more fire prone. A gradual increase in the biaxial curvature of the hygroscopic valves provides the follicles in the driest region with the highest flexural rigidity. The irreversible deformation of the valves for opening is enabled via a temperature-dependent reduction of the elastic modulus of the innermost tissue layer, which then allows releasing the stresses previously generated by shrinkage of the fiber bundles in the adjacent layer during follicle drying. These findings illustrate the level of sophistication by which this species optimizes its fruit opening mechanism over a large distribution range with varying environmental conditions, and may not only have great relevance for developing biomimetic actuators, but also for elucidating the species' capacity to cope with climatic changes.

Tensile rupture of medial arterial tissue studied by X-ray micro-tomography on stained samples.

Detailed characterization of damage and rupture mechanics of arteries is one the current challenges in vascular biomechanics, which requires developing suitable experimental approaches. This paper introduces an approach using in situ tensile tests in an X-ray micro-tomography setup to observe mechanisms of damage initiation and progression in medial layers of porcine aortic samples. The technique requires the use of sodium polytungstate as a contrast agent, of which the conditions for use are detailed in this paper. Immersion of the samples during 24h in a 15g/L concentrated solution provided the best compromise for viewing musculo-elastic units in this tissue. The process of damage initiation, delamination and rupture of medial tissue under tensile loading was observed and can be described as an elementary process repeating several times until complete failure. This elementary process initiates with a sudden mode I fracture of a group of musculo-elastic units, followed by an elastic recoil of these units, causing mode II separation of these, hence a delamination plane. The presented experimental approach constitutes a basis for observation of other constituents, or for investigations on other tissues and damage mechanisms.

Fast virtual histology using X-ray in-line phase tomography: application to the 3D anatomy of maize developing seeds.

BACKGROUND: Despite increasing demand, imaging the internal structure of plant organs or tissues without the use of transgenic lines expressing fluorescent proteins remains a challenge. Techniques such as magnetic resonance imaging, optical projection tomography or X-ray absorption tomography have been used with various success, depending on the size and physical properties of the biological material. RESULTS: X-ray in-line phase tomography was applied for the imaging of internal structures of maize seeds at early stages of development, when the cells are metabolically fully active and water is the main cell content. This 3D imaging technique with histology-like spatial resolution is demonstrated to reveal the anatomy of seed compartments with unequalled contrast by comparison with X-ray absorption tomography. An associated image processing pipeline allowed to quantitatively segment in 3D the four compartments of the seed (embryo, endosperm, nucellus and pericarp) from 7 to 21 days after pollination. CONCLUSION: This work constitutes an innovative quantitative use of X-ray in-line phase tomography as a non-destructive fast method to perform virtual histology and extends the developmental stages accessible by this technique which had previously been applied in seed biology to more mature samples.

Phase contrast synchrotron microtomography: improving noninvasive investigations of fossil embryos in ovo.

Fossil embryos are paramount for our understanding of the development of extinct species. However, although thousands of fossil amniote eggs are known, very few embryos in ovo have been described. First reports of fossil embryos were based on broken eggs, where the embryonic remains were already exposed, because destructive methods on complete eggs were avoided. Investigations of complete eggs therefore required nondestructive approaches, such as X-ray microtomography (µCT). However, due to the general low density contrast between fossilized bones and infilling matrix, only a few specimens have been reported using these techniques. Using propagation phase contrast X-ray synchrotron microtomography (PPC-SR-µCT), we report here the discovery of three well-preserved embryos in Early Cretaceous eggs from Thailand. By scanning these eggs using different imaging techniques, we show that vastly different interpretations can be made regarding the preservation state and/or the developmental stage of these embryos. PPC-SR-µCT also revealed differential contrast between bone categories, presumably reflecting the ossification pattern of these embryos. Applying such an approach to large-scale studies of fossil eggs could lead to more discoveries and detailed studies of fossil embryos, providing important developmental and phylogenetic information on extinct and extant amniotes.

Ice shaping properties, similar to that of antifreeze proteins, of a zirconium acetate complex.

The control of the growth morphologies of ice crystals is a critical issue in fields as diverse as biomineralization, medicine, biology, civil or food engineering. Such control can be achieved through the ice-shaping properties of specific compounds. The development of synthetic ice-shaping compounds is inspired by the natural occurrence of such properties exhibited by antifreeze proteins. We reveal how a particular zirconium acetate complex is exhibiting ice-shaping properties very similar to that of antifreeze proteins, albeit being a radically different compound. We use these properties as a bioinspired approach to template unique faceted pores in cellular materials. These results suggest that ice-structuring properties are not exclusive to long organic molecules and should broaden the field of investigations and applications of such substances.