ABSTRACT
The production of banana peel by the food-processing industry is substantial and the disposal of this waste material has become a matter of concern. However, recent studies have demonstrated that banana peel is a rich source of biologically active compounds that can be transformed into valuable products. This review aims to explore the potential of converting banana peel into valuable products and provides a comprehensive analysis of the physical and chemical composition of banana peel. Additionally, the utilization of banana peel as a substrate to produce animal feed, bio fertilizer, dietary fibers, renewable energy, industrial enzymes, and nanomaterials has been extensively studied. According to the researches that has been done so far, it is clear that banana peel has a broad range of applications and its effective utilization through biorefinery strategies can maximize its economic benefits. Based on previous studies, A plan for feasibility of a banana peel biorefinery has been put up which suggest its potential as a valuable source of renewable energy and high-value products. The utilization of banana peel through biorefinery strategies can provide a sustainable solution for waste management and contribute to the development of a circular economy.
ABSTRACT
Plant protein components contribute positively to human well-being as they modulate the immune status of a consumer, especially when the enzymatic method is employed in order to release their bioactive peptides. These peptides are derived from plant-based foods such as soy, wheat, barley, rye, oats, rice, corn, sorghum, and millet, the famous staple foods around the world. Since these peptides are crucial to functional food among other key industries, the present study endeavored to scout for relevant information within the past three decades, using the Web of Science, Scopus, and Google search engines. In this review, first, the core of immunomodulation and types of immunomodulatory agents will be discussed, followed by the production of plant-based immunomodulatory peptides and their immunomodulatory mechanisms in cells, animals, and humans are also studied. Finally, applications and challenges associated with plant-based immunomodulatory peptides are put forward.
ABSTRACT
Plants are rich repository of a large number of chemical compounds collectively referred to as specialized metabolites. These compounds are of importance for adaptive processes including responses against changing abiotic conditions and interactions with various co-existing organisms. One of the strikingly affirmed functions of these specialized metabolites is their involvement in plants' life-long interactions with complex multi-kingdom microbiomes including both beneficial and harmful microorganisms. Recent developments in genomic and molecular biology tools not only help to generate well-curated information about regulatory and structural components of biosynthetic pathways of plant specialized metabolites but also to create and screen mutant lines defective in their synthesis. In this review, we have comprehensively surveyed the function of these specialized metabolites and discussed recent research findings demonstrating the responses of various microbes on tested mutant lines having defective biosynthesis of particular metabolites. In addition, we attempt to provide key clues about the impact of these metabolites on the assembly of the plant microbiome by summarizing the major findings of recent comparative metagenomic analyses of available mutant lines under customized and natural microbial niches. Subsequently, we delineate benchmark initiatives that aim to engineer or manipulate the biosynthetic pathways to produce specialized metabolites in heterologous systems but also to diversify their immune function. While denoting the function of these metabolites, we also discuss the critical bottlenecks associated with understanding and exploiting their function in improving plant adaptation to the environment.
Subject(s)
Microbiota , Plants , Plants/metabolism , Adaptation, Physiological , GenomicsABSTRACT
Antioxidant peptides were successfully identified from a finger millet protein hydrolysate. The trypsin hydrolysate showed a higher degree of hydrolysis (17.47⯱â¯0.63%) than the pepsin hydrolysate, was further fractionated by ultrafiltration membrane [<3â¯kDa (UF3), 3-10â¯kDa (UF2) andâ¯>â¯10â¯kDa (UF1)]. UF3 with higher antioxidant activity (48.41⯱â¯0.21%) was further fractionated into five fractions (GFA, GFB, GFC, GFD and GFE) using gel filtration. Fraction GFB possessed the highest antioxidant activity (61.79⯱â¯0.08%) and was purified by reverse-phase ultra-flow liquid chromatography. Two potential antioxidant peptides were identified as TSSSLNMAVRGGLTR and STTVGLGISMRSASVR. Synthetic peptides with the same sequence were synthesized and characterized for their antioxidant activity. Molecular docking studies revealed that potential antioxidant activity from both peptides resulted from the interaction of serine and threonine residues with free radicals. The current study suggested that natural peptides identified from finger millet have potent antioxidant activity and regarded as a promising source for a functional food ingredient.
Subject(s)
Antioxidants/chemistry , Eleusine/chemistry , Grain Proteins/chemistry , Peptides/chemistry , Chromatography, Gel , Chromatography, Reverse-Phase , HydrolysisABSTRACT
Phytochemicals in fruits and vegetables have achieved immense significance owing to the increasing evidence which signifying their activity for antioxidant and prevention of chronic diseases. The amount of phloretin (88.39 µg mg-1) and phloridzin (83.03 µg mg-1) were found to be higher among other phenolics determined using UPLC. DPPH, ABTS+, metal chelating and ·OH radical assays were used to evaluate antioxidant activity. Malus baccata pulp portion showed higher antioxidant activity than seed portion. HPLC analysis for free amino acids showed that serine (9.06 µg mg-1), alanine (8.03 µg mg-1), tyrosine (10.33 µg mg-1), and cysteine (76.86 µg mg-1) were only detected in pulp portion while seed comprised of histidine (3.96 µg mg-1) only. Seed portion was also determined for their fatty acid composition including palmitic acid (0.89%), ethyl palmitate (0.56%), methyl petroselinate (0.90%) and linolein (3.93%) using GC-MS analysis. HPAEC technique detected fructose and sucrose in a fair amount of 21 and 17.3 mg g-1 in pulp, while 9.4 and 4.24 mg g-1 in seed portion, respectively. The present study suggested that M. baccata fruit is a rich source of phenolic and other chemical components which can be used in food products and nutraceutical formulations.
ABSTRACT
Proteins embedded in soft biological membranes experience a long-range force mediated by elastic curvature deformations. The classical linearized Helfrich-Canham Hamiltonian based derivations reveal the nature of the force between a pair of proteins to be repulsive in the zero-temperature limit and the interaction potential is inversely proportional to the fourth power of the distance separating the inclusions. Such a result is the starting point to understand many-body interactions between proteins in biological membranes and the study of their clustering or, more broadly, self-organization. A key observation regarding this widely quoted result is that any two (mechanically rigid) proteins will experience an identical force. In other words, there is no specificity in the currently employed continuum models that purport to explain protein interactions. In this work we argue that each protein has a unique mechanical signature based on its interaction with the surrounding lipid bilayer membrane and cannot be treated as a non-specific rigid object. We modify the classical Helfrich-Canham theory of curvature elasticity to incorporate protein-membrane specificity, discuss the estimation of the new model parameters via atomistic simulations and re-evaluate the curvature-mediated force between proteins. We find that the incorporation of protein-specificity can reduce the interaction force by several orders of magnitude. Our result may provide at least one plausible reason behind why in some computational and experimental studies, a net attractive force between proteins is in evidence.
Subject(s)
Cell Membrane/chemistry , Proteins/chemistry , Elasticity , Lipid BilayersABSTRACT
A key step in the HIV-infection process is the fusion of the virion membrane with the target cell membrane and the concomitant transfer of the viral RNA. Experimental evidence suggests that the fusion is preceded by considerable elastic softening of the cell membranes due to the insertion of fusion peptide in the membrane. What are the mechanisms underpinning the elastic softening of the membrane upon peptide insertion? A broader question may be posed: insertion of rigid proteins in soft membranes ought to stiffen the membranes not soften them. However, experimental observations perplexingly appear to show that rigid proteins may either soften or harden membranes even though conventional wisdom only suggests stiffening. In this work, we argue that regarding proteins as merely non-specific rigid inclusions is flawed, and each protein has a unique mechanical signature dictated by its specific interfacial coupling to the surrounding membrane. Predicated on this hypothesis, we have carried out atomistic simulations to investigate peptide-membrane interactions. Together with a continuum model, we reconcile contrasting experimental data in the literature including the case of HIV-fusion peptide induced softening. We conclude that the structural rearrangements of the lipids around the inclusions cause the softening or stiffening of the biological membranes.
Subject(s)
Cell Membrane/chemistry , Cell Membrane/virology , Chemical Phenomena , HIV/physiology , Human Immunodeficiency Virus Proteins/chemistry , Human Immunodeficiency Virus Proteins/metabolism , Virus Internalization , Computer SimulationABSTRACT
Pearl millet (Pennisetum glaucum) is a rich source of protein, used for present study to hydrolyze protein, peptide separation and its functional activity. Antioxidative bioactive peptide was successfully identified from pearl millet using trypsin enzyme. Different antioxidative potential of isolated peptide were assessed based on activity of DPPH radical, ABTS radical, hydroxyl radical, Fe(2+) chelating ability and reducing power. Bioactive peptide separated by gel-filtration chromatography, showed the higher antioxidant activity as tested by different free radicals. The activity of pearl millet protein hydrolysate fraction was found for DPPH assay (67.66%), ABTS assay (78.81%), Fe(2+) chelating ability (51.20%), hydroxyl assay (60.95%) and reducing power (0.375nm) was further purified using reversed-phase UFLC and subjected to matrix assisted laser desorption/ionization time-of-flight/time-of-flight mass spectrometry (MALDI-TOF/TOF-MS) for sequential identification of the peptide. The sequence SDRDLLGPNNQYLPK was identified as antioxidant peptide.
Subject(s)
Antioxidants/chemistry , Pennisetum/chemistry , Peptides/chemistry , Protein Hydrolysates/chemistry , Antioxidants/isolation & purification , Benzothiazoles/metabolism , Calorimetry, Differential Scanning , Molecular Weight , Peptides/isolation & purification , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization , Sulfonic Acids/metabolism , Tandem Mass Spectrometry , Trypsin/metabolismABSTRACT
A sensitive, selective, precise, and stability-indicating high-performance thin-layer chromatographic (HPTLC) method for the analysis of stavudine both as a bulk drug and in formulations is developed and validated. The solvent system consisted of toluene-methanol-chloroform-acetone (7.0:3.0:1.0:1.0, v/v/v/v). Densitometric analysis of stavudine is carried out in the absorbance mode at 270 nm. This system is found to give compact spots for stavudine (retention factor value of 0.45 +/- 0.05) following development of chromatoplates with the mobile phase. Stavudine is subjected to acid and alkali hydrolysis, oxidation, dry-heat and wet-heat treatment, and photo and UV degradation. The drug undergoes degradation under acidic and basic conditions, oxidation, and wet-heat degradation. Linearity is found to be in the range of 30-1000 ng/spot with a significantly high value of correlation coefficient. The linear regression analysis data for the calibration plots show a good linear relationship with r2 = 0.9997 +/- 0.05 in the working concentration range of 300 to 1000 ng/spot. The mean value of slope and intercept are 0.10 +/- 0.06 and 22.12 +/- 1.08, respectively. The method is validated for precision, robustness, and recovery. The limits of detection and quantitation are 10 and 30 ng/spot, respectively. The proposed HPTLC method is utilized to investigate the kinetics of the acid degradation process. Arrhenius plot is constructed and activation energy is calculated.
Subject(s)
Chromatography, Thin Layer/methods , Drug Stability , Guidelines as Topic , Reverse Transcriptase Inhibitors/chemistry , Stavudine/chemistry , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
Two sensitive and reproducible methods are described for the quantitative determination of itopride hydrochloride (IH) in the presence of its degradation products. The first method is based on HPLC separation on a reversed phase Kromasil column [C18 (5-microm, 25 cm x 4.6 mm, ID)] at ambient temperature using a mobile phase consisting of methanol and water (70:30, v/v) adjusted to pH 4.0 with orthophosphoric acid with UV detection at 258 nm. The flow rate was 1.0 mL per min with an average operating pressure of 180 kg/cm2. The second method is based on HPTLC separation on silica gel 60 F254 using toluene:methanol:chloroform:10% ammonia (5.0:3.0:6.0:0.1, v/v/v/v) as mobile phase at 270 nm. The analysis of variance (ANOVA) and Student's t-test were applied to correlate the results of IH determination in dosage form by means of HPLC and HPTLC methods. The drug was subjected to acid and alkali hydrolysis, oxidation, dry heat, wet heat treatment, UV, and photodegradation. The proposed HPLC method was utilized to investigate the kinetics of the acidic, alkaline, and oxidative degradation processes at different temperatures and the apparent pseudo-first-order rate constant, half-life, and activation energy were calculated. In addition the pH-rate profile of degradation of IH in constant ionic strength buffer solutions in the pH range 2-11 was studied.
Subject(s)
Benzamides/chemistry , Benzamides/isolation & purification , Benzyl Compounds/chemistry , Benzyl Compounds/isolation & purification , Analysis of Variance , Calibration , Chromatography, High Pressure Liquid/methods , Chromatography, Thin Layer , Half-Life , Molecular Structure , Reproducibility of Results , ThermodynamicsABSTRACT
A multifactor optimization technique is successfully applied to study the effect of simultaneously varying the system variables on feasibility of nevirapine analysis by packed column supercritical fluid chromatography (PC-SFC). The optimal conditions were determined with the aid of the response surface methodology using 3(3) factorial designs. The method is based on methanol-modified carbon dioxide as the mobile phase at flow rate of 3.0 ml/min with elution through a JASCO Finepak SIL-5, [C18 (5-micron, 25 cm x 4.6 mm, i.d.)] column using photodiode array detection. The method has been successfully used to analyze commercial solid dosage form to assess the chromatographic performance of SFC system. The present work briefs the thermodynamic applications of PC-SFC with an emphasis on the results of nevirapine. The foremost of such applications is the determination of solute diffusion coefficient in supercritical mobile phase by Taylor-Aris peak broadening technique.
Subject(s)
Chromatography, Supercritical Fluid/methods , Nevirapine/isolation & purification , Anti-HIV Agents/chemistry , Anti-HIV Agents/isolation & purification , Biophysical Phenomena , Biophysics , Calibration , Chromatography , Chromatography, High Pressure Liquid , Diffusion , Kinetics , Models, Chemical , Models, Theoretical , Nevirapine/chemistry , Pressure , Regression Analysis , Reproducibility of Results , Sensitivity and Specificity , Spectrophotometry , Temperature , Thermodynamics , Ultraviolet RaysABSTRACT
A sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic method for analysis of metadoxine both as a bulk drug and in formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of acetone-chloroform-methanol-ammonia (7.0:4.0:3.0:1.2, v/v/v/v). Densitometric analysis of metadoxine was carried out in the absorbance mode at 315 nm. This system was found to give compact spots for metadoxine (Rf value of 0.45+/-0.02, for six replicates). Metadoxine was subjected to acid, alkali and neutral hydrolysis, oxidation, dry and wet heat treatment and photo and UV degradation. The drug undergoes degradation under all stress conditions. Also, the degraded products were well resolved from the pure drug with significantly different Rf values. The method was validated for linearity, precision, robustness, LOD, LOQ, specificity and accuracy. Linearity was found to be in the range of 100-1500 ng/spot with significantly high value of correlation coefficient r2=0.9997+/-1.02. The linear regression analysis data for the calibration plots showed good linear relationship with r2=0.9999+/-0.58 in the working concentration range of 200-700 ng/spot. The mean value of slope and intercept were 0.11+/-0.04 and 18.73+/-1.89, respectively. The limits of detection and quantitation were 50 and 100 ng/spot, respectively. Statistical analysis proves that the method is repeatable and specific for the estimation of the said drug. As the method could effectively separate the drug from its degradation products, it can be employed as a stability-indicating one. Moreover, the proposed HPTLC method was utilized to investigate the kinetics of acid and base degradation process. Arrhenius plot was constructed and activation energy was calculated respectively for acid and base degradation process.
Subject(s)
Pyridoxine/analysis , Pyrrolidonecarboxylic Acid/analysis , Calibration , Chromatography, High Pressure Liquid , Chromatography, Thin Layer , Drug Combinations , Drug Stability , Kinetics , Linear Models , Reference Standards , Reproducibility of Results , Sensitivity and Specificity , Solutions , TabletsABSTRACT
Two methods are described for the simultaneous determination of tizanidine and rofecoxib in binary mixture. The first method was based on HPTLC separation of the two drugs followed by densitometric measurements of their spots at 311 nm. The separation was carried out on Merck HPTLC aluminium sheets of silica gel 60 F254 using toluene:methanol:acetone (7.5:2.5:1.0, v/v/v) as mobile phase. The linear regression analysis data was used for the regression line in the range of 10-100 and 100-1500 ng/spot for tizanidine and rofecoxib, respectively. The second method was based on HPLC separation of the two drugs on the reversed phase kromasil column [C18 (5 microm, 25 cm x 4.6 mm, i.d.)] at ambient temperature using a mobile phase consisting of phosphate buffer pH 5.5 and methanol (45:55, v/v). Flow rate was 1.0 ml/min with an average operating pressure of 180 kg/cm2. Quantitation was achieved with UV detection at 235 nm based on peak area with linear calibration curves at concentration ranges 10-200 and 100-2000 microg/ml for tizanidine and rofecoxib, respectively. Both methods have been successively applied to pharmaceutical formulation. No chromatographic interference from the tablet excipients was found. Both methods were validated in terms of precision, robustness, recovery and limits of detection and quantitation. The analysis of variance (ANOVA) and Student's t-test were applied to correlate the results of tizanidine and rofecoxib determination in dosage form by means of HPTLC and HPLC method.
Subject(s)
Clonidine/analogs & derivatives , Clonidine/analysis , Clonidine/chemistry , Lactones/analysis , Lactones/chemistry , Sulfones/analysis , Sulfones/chemistry , Chromatography, High Pressure Liquid/methods , Chromatography, Thin Layer/methods , Dosage FormsABSTRACT
A sensitive, selective, precise and robust high-performance thin-layer chromatographic method of analysis of E and Z stereoisomers of guggulsterone (the hypolipidemic agent in the gum-resin exudates of Commiphora mukul) both as a bulk drug and in formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene-acetone (9:1, v/v). Densitometric analysis of guggulsterone was carried out in the absorbance mode at 250 nm. This system was found to give compact spots for E- and Z-guggulsterone (Rf value of 0.38 +/- 0.02 and 0.46 +/- 0.02, respectively) following double development of chromatoplates with the same mobile phase. The linear regression analysis data for the calibration plots for E- and Z-guggulsterone showed good linear relationship with r2 = 0.9977 +/- 0.054 and 0.9975 +/- 0.068, respectively, in the concentration range of 100-6000 ng/spot. The mean value of slope and intercept were 0.11 +/- 0.006 and 0.11 +/- 0.005, 14.26 +/- 0.56 and 10.92 +/- 0.76, respectively, for E- and Z-guggulsterone. The method was validated for precision, robustness and recovery. The limit of detection and quantitation were 12, 10 and 24, 20 ng/spot, respectively, for E- and Z-guggulsterone. Statistical analysis proves that the method is repeatable and selective for the estimation of the said drug. Since the proposed mobile phase effectively resolves the E- and Z-isomers of guggulsterone, this HPTLC method can be applied for identification and quantitation of these isomers in herbal extracts and pharmaceutical dosage form.
Subject(s)
Chromatography, High Pressure Liquid/methods , Chromatography, Thin Layer/methods , Commiphora/chemistry , Pregnenediones/analysis , Calibration , Capsules , Linear Models , Plant Extracts/chemistry , Pregnenediones/chemistry , Reference Standards , Reproducibility of Results , Sensitivity and Specificity , StereoisomerismABSTRACT
Stress degradation studies were carried out on guggulsterone (the hypolipidemic agent in the gum-resin exudates of Commiphora mukul) following the conditions prescribed in the parent drug stability testing guideline (Q1AR) issued by International Conference on Harmonization (ICH). The present study describes degradation of guggulsterone under different ICH prescribed stress conditions (acid and base hydrolysis, oxidation, dry and wet heat degradation and photodegradation) and establishment of a stability indicating HPTLC assay. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene-acetone (9:1, v/v). Densitometric analysis of guggulsterone was carried out in the absorbance mode at 250 nm. This system was found to give compact spots for E- and Z-guggulsterone, (Rf value of 0.38 +/- 0.02 and 0.46 +/- 0.02, respectively) following double development of chromatoplates with the same mobile phase. The drug undergoes degradation under acidic and basic conditions, oxidation, dry and wet heat treatment and photodegradation. All the peaks of degraded products were resolved from the standard guggulsterone with significantly different Rf values. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one.
Subject(s)
Pregnenediones/analysis , Chromatography, High Pressure Liquid , Chromatography, Thin Layer , Drug Contamination/prevention & control , Drug Stability , Hot Temperature , Hydrogen Peroxide/chemistry , Photochemistry , Pregnenediones/chemistry , StereoisomerismABSTRACT
A sensitive, selective, precise and stability-indicating high-performance thin layer chromatography (HPTLC) method for analysis of indinavir sulphate both as a bulk drug and in formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of carbon tetrachloride/chloroform/methanol/10% v/v ammonia (4:4.5:1.5:0.05, v/v/v/v). Densitometric analysis of indinavir sulphate was carried out in the absorbance mode at 260 nm. This system was found to give compact spots for indinavir sulphate (Rf value of 0.43 +/- 0.02, for six replicates). Indinavir sulphate was subjected to acid and alkali hydrolysis, oxidation, dry and wet heat treatment, and photo degradation. The drug undergoes degradation under acidic and basic conditions, oxidation, dry and wet heat treatment, and photo degradation. Also the degraded products were well resolved from the pure drug with significantly different Rf values. The method was validated for linearity, precision, robustness, limit of detection (LOD), limit of quantitation (LOQ), specificity and accuracy. Linearity was found to be in the range of 100-6000 ng/spot with significantly high value of correlation coefficient r2 = 0.997 +/- 0.64. The linear regression analysis data for the calibration plots showed good linear relationship with r2 = 0.999 +/- 0.002 in the working concentration range of 1000-6000 ng/spot. The LOD and LOQ were 40 and 120 ng/spot, respectively. Statistical analysis proves that the method is repeatable and specific for the estimation of the said drug. As the method could effectively separate the drug from its degradation products, it can be employed as a stability-indicating one. Moreover, the proposed HPTLC method was utilized to investigate the kinetics of acid degradation process. Arrhenius plot was constructed and activation energy was calculated.
Subject(s)
Chromatography, High Pressure Liquid/standards , Chromatography, Thin Layer/standards , Indinavir/chemistry , Indinavir/standards , Practice Guidelines as Topic , Technology, Pharmaceutical/methods , Technology, Pharmaceutical/standards , Chromatography, High Pressure Liquid/methods , Chromatography, Thin Layer/methods , Stress, MechanicalABSTRACT
A sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic method of analysis of nevirapine both as a bulk drug and in formulations was developed and validated. The solvent system consisted of toluene-carbon tetrachloride-methanol-acetone-ammonia (3.5:3.5:2.0:1.0:0.05, v/v/v/v/v). Densitometric analysis of nevirapine was carried out in the absorbance mode at 289nm. This system was found to give compact spots for nevirapine (R(f) value of 0.44+/-0.02). Nevirapine was subjected to acid and alkali hydrolysis, oxidation, dry heat and wet heat treatment and photodegradation. The drug undergoes degradation under acidic, basic conditions and oxidation. Also the degraded products were well resolved from the pure drug with significantly different R(f) values. Linearity was found to be in the range of 30-1000ng/spot with significantly high value of correlation coefficient. The linear regression analysis data for the calibration plots showed good linear relationship with r(2)=0.998+/-0.002 in the working concentration range of 300ng/spot to 1000ng/spot. The mean value of slope and intercept were 0.073+/-0.005 and 36.78+/-1.50, respectively. The method was validated for precision, robustness and recovery. The limit of detection and quantitation were 5 and 10ng/spot, respectively. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one. Moreover, the proposed HPTLC method was utilized to investigate the kinetics of acid degradation process. Arrhenius plot was constructed and activation energy was calculated.
ABSTRACT
A simple, selective, precise, and stability-indicating high-performance thin layer chromatographic method of analysis of Linezolid both as a bulk drug and in formulations was developed and validated in pharmaceutical dosage form. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene-acetone (5:5, v/v). This system was found to give compact spots for Linezolid (Rf value of 0.29 +/- 0.01). Linezolid was subjected to acidic, alkali hydrolysis, oxidation, and photodegradation. The degraded products also were well separated from the pure drug. Densitometric analysis of Linezolid was conducted in the absorbance mode at 254 nm. The linear regression data for the calibration plots showed good linear relationship with r2 = 0.997 +/- 0.001 in the concentration range of 300-800 ng/spot. The mean value of correlation coefficient, slope, and intercept were 0.998 +/- 0.003, 0.15 +/- 0.009, and 19.52 +/- 1.66 respectively. The method was validated for precision, accuracy, ruggedness, and recovery. The limits of detection and quantification were 20 ng/spot and 50 ng/spot, respectively. The drug undergoes degradation under acidic and basic conditions, oxidation and photo degradation. All the peaks of degraded product were resolved from the standard drug with significantly different Rf values. This indicates that the drug is susceptible to acid-base hydrolysis, oxidation, and photo degradation. Statistical analysis proves that the method is reproducible and selective for the estimation of the said drug. Because the method could effectively separate the drug from its degradation products, it can be used as a stability indicating one.
Subject(s)
Acetamides/administration & dosage , Anti-Infective Agents/administration & dosage , Oxazolidinones/administration & dosage , Chemistry, Pharmaceutical , Chromatography, Thin Layer , Hydrolysis , Linezolid , Materials Testing , Oxidation-Reduction , PhotochemistryABSTRACT
A simple, selective, precise and stability-indicating high-performance thin-layer chromatographic method of analysis of tizanidine hydrochloride both as a bulk drug and in formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene-acetone-ammonia (5:5:0.1, v/v/v). This system was found to give compact spots for tizanidine hydrochloride (R(f) value of 0.32+/-0.01). Tizanidine hydrochloride was subjected to acid and alkali hydrolysis, oxidation and photodegradation. Also, the degraded product was well separated from the pure drug. Densitometric analysis of tizanidine hydrochloride was carried out in the absorbance mode at 315 nm. The linear regression analysis data for the calibration plots showed good linear relationship with r(2)=0.9922 in the concentration range 300-1000 ng per spot. The mean value of correlation coefficient, slope and intercept were 0.9922+/-0.002, 0.064+/-0.001 and 38.09+/-1.71, respectively. The method was validated for precision, recovery and robustness. The limits of detection and quantitation were 88 and 265 ng per spot, respectively. The drug does not undergo degradation under acidic and basic conditions. The samples degraded with hydrogen peroxide showed additional peak at R(f) value of 0.12. This indicates that the drug is susceptible to oxidation. Statistical analysis proves that the method is repeatable and selective for the estimation of said drug. As the method could effectively separate the drug from its degradation product, it can be employed as a stability-indicating one.
Subject(s)
Clonidine/analogs & derivatives , Clonidine/analysis , Clonidine/chemistry , Pharmaceutical Preparations/analysis , Pharmaceutical Preparations/chemistry , Chemistry, Pharmaceutical , Chromatography, High Pressure Liquid/methods , Chromatography, Thin Layer/methods , Drug Contamination/prevention & control , Drug StabilityABSTRACT
A sensitive, selective, precise and stability indicating high-performance thin layer chromatographic method of analysis of clopidogrel bisulphate both as a bulk drug and in formulations was developed and validated in pharmaceutical dosage form. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of carbon tetrachloride-chloroform-acetone (6:4:0.15, v/v/v). This system was found to give compact spots for clopidogrel bisulphate (R(f) value of 0.30+/-0.01). Clopidogrel bisulphate was subjected to acid and alkali hydrolysis, oxidation, photodegradation and dry heat treatment. Also the degraded products were well separated from the pure drug. Densitometric analysis of clopidogrel bisulphate was carried out in the absorbance mode at 230 nm. The linear regression data for the calibration plots showed good linear relationship with r(2)=0.999+/-0.001 in the concentration range of 200-1000 ng. The mean value of correlation coefficient, slope and intercept were 0.999+/-0.001, 0.093+/-0.011 and 8.83+/-0.99, respectively. The method was validated for precision, accuracy, ruggedness and recovery. The limits of detection and quantitation were 40 and 120 ng per spot, respectively. The drug undergoes degradation under acidic and basic conditions, oxidation and dry heat treatment. All the peaks of degraded product were resolved from the standard drug with significantly different R(f) values. This indicates that the drug is susceptible to acid-base hydrolysis, oxidation and dry heat degradation. Statistical analysis proves that the method is reproducible and selective for the estimation of the said drug. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one.