ABSTRACT
To fully tap into the potential of boron nitride nanotubes (BNNTs), addressing their inherent insolubility was imperative. In this study, a water-soluble polymer, poly(acrylic acid) (PAA), was employed as a surface-active reagent, using an accessible and scalable approach. The physical properties and structure of PAA-BNNT were meticulously confirmed through valuable characterization techniques, encompassing X-ray diffraction, scanning electron microscopy, Fourier-transform infrared, X-ray photoelectron spectroscopy, and thermogravimetric analysis. PAA-BNNT exhibited remarkable dispersion in water and demonstrated compatibility with the poly(vinyl alcohol) (PVA) matrix. When incorporating 30 wt % of PAA-BNNT (about 24.75 wt % net BNNT) into the PVA matrix, the thermal conductivity surged by over 21.7 times compared to pure PVA due to the uniform dispersion of high-concentration PAA-BNNT in the polymer matrix.
ABSTRACT
A broad range of functionalized boron nitride nanotubes has been synthesized using a facile method based on the coupling reaction between BNNT and arenediazonium tetrafluoroborate derivatives. The formation of covalent bonds between nanotubes and organic moieties results in homogeneous dispersions in organic solvents, such as N,N'-dimethylformamide, acetone, isopropanol, and tetrahydrofuran. Digital images demonstrated improved and stabilized dispersions lasting for several days, while TEM analysis indicated no breakdown of nanotubes due to the mild reaction conditions employed. The functionalization process was further confirmed through additional characterization, employing FTIR, XPS, and TGA. Surface-functionalized materials exhibited a significant weight percentage of functionality, reaching up to 21.8% according to TGA.
ABSTRACT
Lithium (Li) metal is a promising anode material for high-energy-density Li batteries due to its high specific capacity. However, the uneven deposition of Li metal causes significant volume expansion and safety concerns. Here, we investigate the impact of a gradient-infused Li-metal anode using silver (Ag)-decorated carbonized cellulose fibers (Ag@CC) as a three-dimensional (3D) current collector. The loading level of the gradient-infused Li-metal anode is controlled by the thermal infusion time of molten Li. In particular, a 5 s infusion time in the Ag@CC current collector creates an appropriate space with a lithiophilic surface, resulting in improved cycling stability and a reduced volume expansion rate. Moreover, integrating a 5 s Ag@CC anode with a high-capacity cathode demonstrates superior electrochemical performance with minimal volume expansion. This suggests that a gradient-infused Li-metal anode using Ag@CC as a 3D current collector represents a novel design strategy for Li-metal-based high-capacity Li-ion batteries.
ABSTRACT
Boron nitride nanotubes (BNNTs) were purified without the use of a dispersant by controlling the surface tension and steric repulsion of solvent molecules. This method effectively enhanced the difference in solubilities of impurities and BNNTs. The purification process involved optimizing the alkyl-chains of alcohol solvents and adjusting the concentration of alcohol solvent in water to regulate surface tension and steric repulsion. Among the solvents tested, a 70 wt% t-butylalcohol in water mixture exhibited the highest selective isolation of BNNTs from impurities based on differences in solubilities. This favorable outcome was attributed to the surface tension matching with BNNTs, steric repulsion from bulky alkyl chain structures, and differences in interfacial energy between BNNT-liquid and impurity-liquid interfaces. Through this optimized purification process, impurities were removed to an extent of up to 93.3%. Additionally, the purified BNNTs exhibited a distinct liquid crystal phase, which was not observed in the unpurified BNNTs.
ABSTRACT
Microfiber fabrication via wet-spinning of lyotropic liquid crystals (LCs) with anisotropic nanomaterials has gained increased attention due to the microfibers' excellent physical/chemical properties originating from the unidirectional alignment of anisotropic nanomaterials along the fiber axis with high packing density. For wet-spinning of the microfibers, however, preparing lyotropic LCs by achieving high colloidal stability of anisotropic nanomaterials, even at high concentrations, has been a critically unmet prerequisite, especially for recently emerging nanomaterials. Here, we propose a cationically charged polymeric stabilizer that can efficiently be adsorbed on the surface of boron nitride nanotubes (BNNTs), which provide steric hindrance in combination with Coulombic repulsion leading to high colloidal stability of BNNTs up to 22 wt %. The BNNT LCs prepared from the dispersions with various stabilizers were systematically compared using optical and rheological analysis to optimize the phase behavior and rheological properties for wet-spinning of the BNNT LCs. Systematic optical and mechanical characterizations of the BNNT microfibers with aligned BNNTs along the fiber axis revealed that properties of the microfibers, such as their tensile strength, packing density, and degree of BNNT alignment, were highly dependent on the quality of BNNT LCs directly related to the types of stabilizers.
ABSTRACT
Defects on graphene over a micrometer in size were selectively blocked using polyvinyl alcohol through the formation of hydrogen bonding with defects. Because this hydrophilic PVA does not prefer to be located on the hydrophobic graphene surface, PVA selectively filled hydrophilic defects on graphene after the process of deposition through the solution. The mechanism of the selective deposition via hydrophilic-hydrophilic interactions was also supported by scanning tunneling microscopy and atomic force microscopy analysis of selective deposition of hydrophobic alkanes on hydrophobic graphene surface and observation of PVA initial growth at defect edges.
ABSTRACT
Boron nitride nanotube (BNNT) has attracted recent attention owing to its exceptional material properties; yet, practical implementation in real-life applications has been elusive, mainly due to the purity issues associated with its large-scale synthesis. Although different purification methods have been discussed so far, there lacks a scalable solution method in the community. In this work, a simple, high-throughput, and scalable purification of BNNT is reported via modification of an established sorting technique, aqueous polymer two-phase extraction. A complete partition mapping of the boron nitride species is established, which enables the segregation of the highly pure BNNT with a major impurity removal efficiency of > 98%. A successful scaling up of the process is illustrated and provides solid evidence of its diameter sorting behavior. Last, towards its macroscopic assemblies, a liquid crystal of the purified BNNT is demonstrated. The effort toward large-scale solution purification of BNNT is believed to contribute significantly to the macroscopic realization of its exceptional properties in the near future.
ABSTRACT
Self-assembled alkane layers are introduced between graphene layers to physically block nanometer size defects in graphene and lateral gas pathways between graphene layers. A well-defined hexatriacontane (HTC) monolayer on graphene could cover nanometer-size defects because of the flexible nature and strong intermolecular van der Waals interactions of alkane, despite the roughness of graphene. In addition, HTC multilayers between graphene layers greatly improve their adhesion. This indicates that HTC multilayers between graphene layers can effectively block the lateral pathway between graphene layers by filling open space with close-packed self-assembled alkanes. By these mechanisms, alternately stacked composites of graphene and self-assembled alkane layers greatly increase the gas-barrier property to a water vapor transmission rate (WVTR) as low as 1.2 × 10-3 g/(m2 day), whereas stacked graphene layers generally show a WVTR < 0.5 g/(m2 day). Furthermore, the self-assembled alkane layers have superior crystallinity and wide bandgap, so they have little effect on the transmittance.
ABSTRACT
Boron nitride nanotubes (BNNTs) have attracted increasing attention for their exceptional thermal, electronic, and optical properties. However, the progress in BNNTs applications has largely been limited by the low purity of as-synthesized BNNTs and inefficient solution-processing protocols due mainly to the instability of BNNTs in most of the solvents. Therefore, fabrication of highly pure, stable, and fully individualized BNNTs in a rational manner is required. Here, we report a significant improvement in the preparation of well-dispersed BNNTs, utilizing conjugated polymers that interact with BNNTs, allowing selective sorting and individualization of the nanotubes. Evidence of strong interactions between the polymers and BNNTs was observed by optical absorption and photoluminescence spectroscopies, while effective individualization was observed by electron microscopy. The sorted BNNTs were successfully used in a solution-processing protocol called dose-controlled, floating evaporative self-assembly (DFES) previously established for single-walled carbon nanotubes (SWCNT) array fabrication. A device fabricated via DFES from the sorted BNNTs mixed with polymer-wrapped, semiconducting single-walled carbon nanotubes (s-SWCNTs) exhibited an on-state conductance of 253 ± 6 µS µm-1 and an on/off ratio of 106.6±0.4 for a gate voltage of -0.1 V. This breakthrough in BNNT dispersion and isolation is a significant advancement toward the exploitation of BNNTs in future applications.
ABSTRACT
Commercially available boron nitride nanotubes (BNNTs) and their purified form (pBNNTs) were dispersed in aqueous solutions with various dispersants, and their cytotoxicity and drug encapsulation capacity were monitored. Our data suggest that pBNNTs showed an average increase in dispersibility of 37.3% in aqueous solution in the presence of 10 different dispersants. In addition, 100 µg of pBNNTs induced an average decrease in cytotoxicity of 27.4% compared to same amount of BNNTs in normal cell lines. The same amount of pBNNTs can encapsulate 10.4-fold more drug (camptothecin) compared to BNNTs. These data suggest that the purification of BNNTs improves several of their properties, which can be applied to biological experiments and are thus essential in the biological application of BNNTs.
Subject(s)
Boron Compounds/chemistry , Nanotechnology/methods , Nanotubes/chemistry , Water/chemistry , 3T3-L1 Cells , Animals , Antineoplastic Agents, Phytogenic/chemistry , Antineoplastic Agents, Phytogenic/pharmacology , Boron Compounds/isolation & purification , Boron Compounds/pharmacology , CHO Cells , Caco-2 Cells , Camptothecin/chemistry , Camptothecin/pharmacology , Cell Line, Tumor , Cell Survival/drug effects , Cricetinae , Cricetulus , Drug Compounding/methods , Humans , MiceABSTRACT
The morphological analysis of the end of boron nitride nanotubes (BNNTs) using high-resolution transmission electron microscopy (HR-TEM) can provide valuable insight into the growth mechanism in high temperature pressure (HTP) laser ablation where the best quality of BNNT materials can be obtained so far. Two growth modes of BNNT coexisting during the synthesis process have been proposed based on HR-TEM observation and length analysis. One is the root growth mode, in which boron nitride (BN) species formed via the surface interaction between surrounding N2 molecules and boron nanodroplets incorporate into the tubular structure. Another mode called open-end growth mode means the prolongation of tube growth from the exposed BN edge surrounding the surface of boron nanodroplets which is constructed by the heterogeneous nucleation of absorbed BN radicals from the gas plume. The statistical data, the proportions of end structures and the length of BNNTs, could be fitted to two growth modes, and the open-end growth mode is found to be especially effective in producing longer nanotubes with a higher growth rate. The scientific understanding of the growth mechanism is believed to provide the control for optimized production of BNNTs.
ABSTRACT
Conducting polymer-based organic electrochemical capacitor materials have attracted attention because of their highly conductive nature and highly reversible redox reactions on the surface of electrodes. However, owing to their poor stabilities in aprotic electrolytes, alternative organic electrochemical capacitive electrodes are being actively sought. Here, fluorine atoms are introduced into contorted hexabenzocoronene (cHBC) to achieve the first small-molecule-based organic capacitive energy-storage cells that operate at high current rates with satisfactory specific capacities of ≈160 mA h g-1 and superior cycle capabilities (>400) without changing significantly. This high capacitive behavior in the P21/c crystal phase of fluorinated cHBC (F-cHBC) is caused mainly by the fluorine atoms at the end of each peripheral aromatic ring. Combined Monte Carlo simulations and density functional theory (DFT) calculations show that the most electronegative fluorine atoms accelerate ion diffusion on the surface to promote fast Li+ ion uptake and release by an applied current. Moreover, F-cHBC has potential applications as the capacitive anode in Na-ion storage cells. The fast dynamics of its capacitive behavior allow it to deliver a specific capacity of 65 mA h g-1 at a high current of 4000 mA g-1.
ABSTRACT
To understand the relationship between kinetically controlled hierarchical superstructures and photophysical properties, pyrene-based asymmetric liquid crystal (LC) dendrons (abbreviated as PD) were newly synthesized by covalently attaching a pyrene moiety (P) at a biphenyl-based LC dendritic group (D). The phase transition behavior of PD has been systematically studied with a combined technique of thermal analysis, microscopy, spectroscopy, and scattering analysis. PD formed two different crystalline structures depending on the cooling rate: a stable crystalline phase (Ks , slow cooling) and a metastable crystalline phase (Kms , quenching). The kinetically controlled molecular packing structures of PD depend on the competition and cooperation of intermolecular physical interactions with nanophase separation. Upon slow cooling, the PD dimer formed by intermoelcular H-bonding constructed a layered hierarchical structure with the help of nanophase separation. Owing to the strong π-π stacking (J-aggregation) with weak H-bondings, the PD dimer in the layer was slightly tilted to give a monoclinic layered structure with a periodic layer d-spacing of 6.6â nm. In contrast, the metastable Kms phase formed by the quenching process showed a significant tilt of the PD dimer in the layer (d-spacing=4.4â nm) due to the weak π-π stacking (H-aggregation) and the strong H-bondings.
ABSTRACT
A powerful strategy to enhance the thermal conductivity of liquid crystalline epoxy resin (LCER) by simply replacing the conventional amine cross-linker with a cationic initiator was developed. The cationic initiator linearly wove the epoxy groups tethered on the microscopically aligned liquid crystal mesogens, resulting in freezing of the ordered LC microstructures even after curing. Owing to the reduced phonon scattering during heat transport through the ordered LC structure, a dramatic improvement in the thermal conductivity of neat cation-cured LCER was achieved to give a value â¼141% (i.e., 0.48 W/mK) higher than that of the amorphous amine-cured LCER. In addition, at the same composite volume fraction in the presence of a 2-D boron nitride filler, an approximately 130% higher thermal conductivity (maximum â¼23 W/mK at 60 vol %) was observed. The nanoarchitecture effect of the ordered LCER on the thermal conductivity was then examined by a systematic investigation using differential scanning calorimetry, polarized optical microscopy, X-ray diffraction, and thermal conductivity measurements. The linear polymerization of LCER can therefore be considered a practical strategy to enable the cost-efficient mass production of heat-dissipating materials, due to its high efficiency and simple process without the requirement for complex equipment.
ABSTRACT
The epitaxially grown alkane layers on graphene are prepared by a simple drop-casting method and greatly reduce the environmentally driven doping and charge impurities in graphene. Multiscale simulation studies show that this enhancement of charge homogeneity in graphene originates from the lifting of graphene from the SiO2 surface toward the well-ordered and rigid alkane self-assembled layers.
Subject(s)
Advisory Committees/ethics , Conflict of Interest , Consumer Advocacy/ethics , Drug Industry/ethics , Patient Advocacy/ethics , United States Food and Drug Administration/ethics , Advisory Committees/organization & administration , Drug Approval , Humans , United States , United States Food and Drug Administration/organization & administrationABSTRACT
Single-molecule conductance measurements have focused primarily on organic molecular systems. Here, we carry out scanning tunneling microscope-based break-junction measurements on a series of metal chalcogenide Co6Se8 clusters capped with conducting ligands of varying lengths. We compare these measurements with those of individual free ligands and find that the conductance of these clusters and the free ligands have different decay constants with increasing ligand length. We also show, through measurements in two different solvents, 1-bromonaphthalene and 1,2,4-trichlorobenzene, that the conductance decay of the clusters depends on the solvent environment. We discuss several mechanisms to explain our observations.
ABSTRACT
We examined the cultural influence on perceived body weight and the level of health practices at a national and individual level. At a national level, we found that Japanese women (n = 80) overestimate body weight more than Korean (n = 82) and American (n = 63) women. At an individual level, individuals with interdependent self-construal were more prone to overestimate weight than those with independent self-construal (N = 182; American women). Based on the data, we identify that the relationship is mediated by self-criticism, and, importantly, it is self-criticism rather than perceived overweight that predicts the level of health activities. Health practitioners and campaign designers across cultures are recommended to concentrate on promoting positive body esteem instead of encouraging engagement in corrective health behaviors for weight loss.
Subject(s)
Body Image/psychology , Cross-Cultural Comparison , Health Behavior , Self Concept , Weight Perception , Asian People , Body Weight/ethnology , Female , Humans , Japan , Republic of Korea , Self-Assessment , Surveys and Questionnaires , United StatesABSTRACT
Optical transition between singlet and triplet is observed in phosphorescent platinum octaethylporphyrin (PtOEP), on a graphene substrate. PtOEP on single layer of graphene not only modulates the dominant emission wavelength but also enhances the emission intensity. This result addresses new light-matter interactions of the hybrid structure of graphene and a single molecule.
ABSTRACT
This study examines contributing factors of alcohol misuse among college students in South Korea and the U.S. Exploratory factor analyses (EFA) on measurements of alcohol expectancy, alcohol efficacy, and accommodation resulted in social and personal causes for alcohol misuse. Social causes alone predicted alcohol misuse for both countries. Social factors constituted a much stronger predictor of alcohol misuse among South Korean students than among American students. Practical implications for effective deterrence of student binge drinking are discussed.