The relationship between body mass index and cerebrospinal fluid pressure in children with pseudotumor cerebri.

BACKGROUND: Childhood obesity has become a major global health problem. Obesity is associated with major health problems, such as diabetes, hypertension, dyslipidemia, cardiovascular disease. Obesity is also considered a risk factor for Pseudotumor cerebri (PTC). The present study aimed to investigate the relationship between body mass index (BMI), and cerebrospinal fluid (CSF) pressure in patients with pseudotumor cerebri. METHODS: A total of 48 children diagnosed with PTC, who were aged < 18 years and followed up in the pediatric clinic were included in the retrospective study. National BMI percentile curves were used for reference. We investigated statistically the relationship between BMI, clinical and laboratory results, and CSF pressure in patients. RESULTS: Of total patients 27 were female (56.25%) and 21 were male (43.75%). With regard to the BMI percentile, 20 (41.67%) were overweight or obese. CSF pressure was higher in overweight and obese patients compared to children with BMI in normal ranges (p < 0.05). A statistically significant positive correlation was also observed between BMI and CSF pressure values and between monocyte and CSF values (p < 0.05). CONCLUSIONS: The results of the present study indicate a direct relationship between CSF pressure and BMI in children with PTC. Appropriate diet, exercise, and medical treatment in overweight and obese children can make a significant contribution to the treatment of PTC. Additionally, a significant correlation was observed between CSF pressure and monocyte levels.

Clinical, radiographic, and histological evaluation of three different pulp-capping materials in indirect pulp treatment of primary teeth: a randomized clinical trial.

OBJECTIVES: The aim of this randomized, controlled, three-arm parallel group, and double-blinded clinical trial was to evaluate the clinical, radiographic, and histopathological success of three different pulp-capping materials in one-stage indirect pulp treatment of primary teeth. MATERIALS AND METHODS: The study included a total of 109 patients aged 5-9 years who had primary teeth with deep carious lesions and symptoms of reversible pulpitis. The teeth were divided into three groups according to the pulp-capping agents: (I) hard-setting calcium hydroxide (Dycal) (control group) (n = 36), (II) bioactive tricalcium silicate (Biodentine) (n = 37), and (III) resin-based tricalcium silicate (TheraCal LC) (n = 36). All the teeth were evaluated clinically and radiographically at 6, 12, 18, and 24 months postoperatively. A total of 23 primary mandibular second molars that were in their regular exfoliation period (24-40 months) were extracted and fixed in 10% formaldehyde solution. The specimens were evaluated histologically to assess the integrity of the odontoblastic layer, tertiary dentin formation quality of the dentin formed, severity of pulpitis, and other pulpal changes. Data were analyzed using Fisher's exact test, Pearson's chi-square test, and McNemar's test (p = 0.05). RESULTS: At the end of the 24-month follow-up period, the clinical and radiographic success rates for Dycal, Biodentine, and TheraCal LC were 100%, 100%, and 93.3%, respectively, and there was no significant difference among the groups (p > 0.05). However, the TheraCal LC group was statistically unsuccessful when compared to the other groups with regard to the integrity of the odontoblastic layer, severity of pulpitis, and other pulpal changes in histological examination (p < 0.05). CONCLUSION: Indirect pulp capping exhibited high clinical and radiographic success rates in the treatment of primary teeth regardless of the chosen pulp-capping agent. However, histological examination indicated that the pulp status was affected by the chosen capping material especially when selecting a resin-containing material such as TheraCal LC. CLINICAL RELEVANCE: Resin-free calcium silicate-based materials appear to be more favorable in the indirect pulp treatment of primary teeth, particularly in young-age groups that require long-term success.

Influence of ozone application in the stepwise excavation of primary molars: a randomized clinical trial.

OBJECTIVES: The aim of this randomized, controlled, three-arm parallel-group, double-blinded clinical trial was to investigate the clinical and microbiological effects of the ozone application in stepwise excavation of primary molars. MATERIALS AND METHODS: This study was conducted in in vivo conditions with 105 lower primary molars that had deep caries lesions. The teeth were randomly divided into three groups: (I) control group, conventional stepwise excavation with no disinfectants; (II) CHX (positive control) group, 2% chlorhexidine digluconate; and (III) experimental group, ozone application. Dentine samples were collected at 4 different time points (T0, at the first appointment, after partial removal of carious dentin; T1, at the first appointment, after applying disinfection procedure; T2, at the second appointment - at the end of the 4-month period - immediately after the removal of the temporary restoration; T3, at the second appointment, after the final excavation) for the microbiological analysis of mutans streptococci and lactobacilli and the total number of colony-forming units. Clinical changes including dentin color, humidity, and consistency were recorded. Data were analyzed using the Mann-Whitney U test, Friedman test, and chi-squared test (p = 0.05). RESULTS: The dentin became harder and drier after 4 months in all the groups. There was a gradual reduction in the total number of microorganisms in all the three groups. Bacterial reduction was greater in the CHX group compared to the ozone group (p = 0.002) and was greater in the ozone group compared to the control group (p = 0.015) after 4 months (control, 78%; CHX, 93%; ozone, 82%). CONCLUSION: Stepwise excavation of primary teeth provided successful outcomes in all the groups. Moreover, CHX, due to its practicality and cost-effectiveness, can be effectively used with one- or two-step indirect pulp therapies. CLINICAL RELEVANCE: Usage of cavity disinfectants in the stepwise excavation procedure contributes to the reduction of bacterial population in the cavity, which may allow the avoidance of the second step of the indirect pulp therapy for primary teeth.

Effectiveness of the ozone application in two-visit indirect pulp therapy of permanent molars with deep carious lesion: a randomized clinical trial.

OBJECTIVES: The aim of this randomized, three-arm parallel, single-blinded clinical trial was to evaluate the clinical and microbiological effectiveness of the ozone application in two-visit indirect pulp therapy. MATERIALS AND METHODS: One hundred five lower first molar teeth with deep caries lesion were included and randomly assigned three groups to apply the two-visit indirect pulp therapy. Treatment procedure was applied without any disinfectant (control), with 60-s 2% chlorhexidine digluconate (CHX) or 60-s ozone application. In four different stages (after initial excavation, ozone/CHX application before the temporary restoration, 4 months later immediately after removing temporary restoration, and final excavation), dentin humidity, consistency, and color properties were recorded to evaluate the clinical characteristics of the tissue, and standard dentin samples were collected for the microbiological analysis of mutans streptococci, lactobacilli, and the total number of colony-forming units. The data were analyzed by using Mann-Whitney U test for multiple comparisons. RESULTS: The remaining dentin became harder, drier, and darker after 4 months in all groups. However, CHX and ozone application were statistically better than the control group (p < 0.05). There was a gradual decrease in the total number of microorganisms in all groups. While cavity disinfectant applications were improved the antibacterial efficacy (control, 79.11%; CHX, 98.39%; ozone, 93.33%), CHX application exhibited a greater significant reduction than both groups (p = 0.000). CONCLUSION: The two-visit indirect pulp therapy yielded successful results for all study groups. However, CHX would be conveniently preferable due to improving the treatment success. CLINICAL RELEVANCE: The two-visit indirect pulp therapy applied with cavity disinfectant is a proper alternative treatment procedure in deep carious lesions, instead of conventional technique.

Effect of photon-initiated photoacoustic streaming, passive ultrasonic, and sonic irrigation techniques on dentinal tubule penetration of irrigation solution: a confocal microscopic study.

OBJECTIVES: The aim of this in vitro study was to evaluate the efficacy of different irrigation techniques including laser-activated irrigation using an erbium:yttrium-aluminum-garnet (Er:YAG) laser with a novel tip design (photon-induced photoacoustic streaming (PIPS)), Er:YAG laser with Preciso tip, sonic activation, and passive ultrasonic activation on the final irrigation solution penetration into dentinal tubules by using a laser scanning confocal microscope. MATERIAL AND METHODS: In this study, 65 extracted single-rooted human mandibular premolars were instrumented up to size 40 and randomly divided into 5 groups (n = 13) based on the activation technique of the final irrigation solution as follows: conventional irrigation (control group), sonic activation, passive ultrasonic activation, Er:YAG-PIPS tip activation, and Er:YAG-Preciso tip activation. In each group, 5 mL of 5% NaOCl labeled with fluorescent dye was used during the activation as the final irrigation solution. Specimens were sectioned at 2.5 and 8 mm from the apex and then examined under a confocal microscope to calculate the dentinal tubule penetration area. Data were analyzed using two-way analysis of variance (ANOVA) and Tukey's post hoc tests (P = 0.05). RESULTS: Both Er:YAG laser (Preciso/PIPS) activations exhibited a significantly higher penetration area than the other groups (P < 0.05). Additionally, passive ultrasonic activation had significantly higher penetration than the sonic activation group and the control group. Statistically significant differences were also found between each root canal third (coronal > middle > apical) (P < 0.001). CONCLUSIONS: The results from the present study support the use of Er:YAG laser activation (Preciso/PIPS) to improve the effectiveness of the final irrigation procedure by increasing the irrigant penetration area into the dentinal tubules. CLINICAL RELEVANCE: The activation of the irrigant and the creation of the streaming with the Er:YAG laser have a positive effect on the irrigant penetration.

Fracture Resistance of Endodontically Retreated Roots After Retreatment Using Self-Adjusting File, Passive Ultrasonic Irrigation, Photon-Induced Photoacoustic Streaming, or Laser.

OBJECTIVE: Additional cleaning techniques and devices are required to remove maximum amount of residual filling material, which might limit disinfection of root canal system during retreatment. This study aimed to compare fracture resistance of roots when self-adjusting file (SAF), photon-induced photoacoustic streaming (PIPS), passive ultrasonic irrigation (PUI), erbium-doped yttrium aluminum garnet (Er:YAG), or neodymium-doped yttrium aluminum garnet (Nd:YAG) lasers are applied following the use of retreatment files in endodontics. MATERIALS AND METHODS: A total of 117 human mandibular canine teeth of similar dimensions were selected and divided into nine groups (n = 13). Aside from control, instrumented, and only-prepared groups, 91 teeth were remaining, of which 13 were assigned to the only-filling group and final 78 to retreatment, thus R-Endo file, R-Endo+SAF, R-Endo+PUI, R-Endo+Er:YAG laser, R-Endo+Nd:YAG laser, and R-Endo+PIPS. RESULTS: The fracture strengths of the retreatment groups were lower than control, instrumented, and only-filling groups (p < 0.05). There was no difference between the R-Endo group and additional retreatment procedure groups (p > 0.05). CONCLUSIONS: Further cleaning methods using SAF, PIPS, Er:YAG laser, Nd:YAG laser, or PUI did not decrease the fracture resistance when compared with the R-Endo group.

Evaluation of the bond strength of root-end placed mineral trioxide aggregate and Biodentine in the absence/presence of blood contamination.

OBJECTIVE: Mineral trioxide aggregate (MTA) has been accepted as an appropriate root-end filling material in endodontic microsurgery because of setting ability in the wet environment. The aim of this study was to assess the bond strength of root-end placed MTA and Biodentine (Septodont, Saint Maur des Fossés, France) in the absence/presence of blood contamination. MATERIALS AND METHODS: Forty-eight single-rooted maxillary incisors were used. subsequent to root-end resection and apical preparation using ultrasonic retro-tips, the specimens were randomly separated into two groups according to the root-end filling materials: MTA (Cerkamed Medical Company, Stalowa, Poland) or Biodentine. The specimens were then separated into two subgroups according to storage condition (absence/presence of blood) (n = 12). After obtaining 2.0 ± 0.1 mm slices, push-out tests were performed. Each slice was examined under a stereomicroscope to evaluate the failure mode. The data were analyzed using two-way analysis of variance and Tukey's post hoc test for multiple comparisons. The failure modes were analyzed using the Chi-square test (P = 0.05). RESULTS: The bond strength was significantly affected by the presence of blood contamination and root-end filling material type (P < 0.001). Biodentine had better bond strength than MTA (P < 0.001). The most common failure type was adhesive failure. According to the Chi-square test, there were no statistically significant differences among the groups (P = 0.394). CONCLUSIONS: Biodentine had better bond strength values compared to MTA, and the bond strength of both MTA and Biodentine as root-end filling materials was negatively affected by the presence of blood.

Dentinal tubule penetration of AH Plus, iRoot SP, MTA fillapex, and guttaflow bioseal root canal sealers after different final irrigation procedures: A confocal microscopic study.

BACKGROUND AND OBJECTIVE: Varied physical and chemical characteristic of root canal sealers and different irrigant agitation systems can influence the depth of penetration. The aim of this in vitro study was to use a laser scanning confocal microscope in order to assess the dentinal tubules penetration of various sealers after the application of different final irrigation techniques. STUDY DESIGN/MATERIALS AND METHODS: A total of 156 single-rooted extracted mandibular premolars were prepared up to size 40 and randomly distributed into four groups according to the sealer type (n = 39): AH Plus, iRoot SP, MTA Fillapex, and GF Bioseal. Each group was randomly subdivided into three groups according to the final irrigation protocol (n = 13): conventional needle irrigation (CI), photon-induced-photoacoustic streaming activation (PIPS), and passive ultrasonic irrigation (PUI). After the final irrigation procedures, the root canals were obturated with single gutta-percha and labeled sealer mixed with 0.1% fluorescent rhodamine B isothiocyanate. Specimens were sectioned at 2, 5, and 8 mm from the apex, and all the sections were examined under confocal microscope to calculate the dentinal tubule penetration area. Data were analyzed using three-way analysis of variance and Tukey's post hoc tests (P = 0.05). RESULTS: iRoot SP exhibited a significantly higher penetration area than the other groups (P < 0.001), although there were no statistically significant differences between AH Plus, MTA Fillapex, and GF Bioseal (P > 0.05). Er:YAG laser activation with PIPS and PUI had significantly higher penetration than CI (P < 0.001). Statistically significant differences were also determined at each root canal third (coronal > middle > apical; P < 0.001). CONCLUSIONS: The dentinal tubule penetration area was significantly affected by the selection of root canal sealer, final irrigation procedure, and root canal third. Use of iRoot with PIPS tip or PUI seems advantageous in dentinal tubule penetration.

Effect of silver diamine fluoride and ammonium hexafluorosilicate applications with and without Er:YAG laser irradiation on the microtensile bond strength in sound and caries-affected dentin.

BACKGROUND AND OBJECTIVE: Cariostatic and preventive agents are applied to create caries-resistant dentin surfaces and may affect subsequent resin bonding. The aim of this study was to investigate the effect of different agents with and without Er:YAG laser irradiation on the microtensile bond strength (µTBS) of resin composite to sound dentin (SD) and caries-affected dentin (CAD), and to assess the morphological and chemical changes in the specimens. MATERIALS AND METHODS: Ninety-six extracted molar teeth were divided into a control group (deionized water) and two experimental groups (ammonium hexafluorosilicate [SiF], silver diamine fluoride [SDF]), that subdivided according to different conditions (SD, CAD, SD+laser irradiation, CAD+laser irradiation). After treatment procedures, the teeth were restored and the µTBS was tested with a universal testing machine. Morover, 144 teeth were prepared and after treatment modalities; morphological changes of the surface were investigated and elemental analyses were performed using scanning electron microscope/energy dispersive spectroscopy (SEM-EDS). The data were analyzed using Kruskal-Wallis and Mann-Whitney U tests. RESULTS: SDF and SiF applications reduced the µTBS values in both the SD and CAD subgroups (P < 0.05). Laser irradiation increased the µTBS values in the SiF group and the values were adversely affected in the SDF group (P < 0.05). Fluoride content of the specimens increased in all of the treatment groups, compared with the control group. Silver content was detected only in the SDF group, and silicon was detected only in the SiF group. CONCLUSIONS: The µTBS values of resin composite, surface morphology and chemical characteristics of dentin were affected by the material type, dentin condition and laser irradiation and the use of SiF and SDF solutions under the resin restorations do not seem appropriate.

The efficacy of laser, ultrasound and self-adjustable file in removing smear layer debris from oval root canals following retreatment: A scanning electron microscopy study.

This study aims to compare the efficacy of different irrigation activation methods to remove smear layer and debris from oval-shaped root canals following retreatment. Ninety mandibular canines with oval-shaped root canals were selected. Retreatment was performed with R-Endo retreatment files. The samples were randomly divided into six groups (n = 15). Groups were assigned according to agitation technique: R-Endo with classic irrigation, with self-adjustable file, with passive ultrasonic irrigation, R-Endo + Er:YAG, R-Endo + PIPS and R-Endo + Nd:YAG. Compared with the classic irrigation (R-Endo + CI) group, all other groups were more successful in reducing smear layer and debris (P < 0.05). The least amount of residual smear layer and debris was detected in the Er:YAG laser group (P < 0.05). Additional use of different agitation methods contributes to removal of debris and smear layer following root canal filling removal with rotary instruments; however, none of the techniques tested render root canal walls completely free of smear layer or debris.

Effect of novel restorative materials and retention slots on fracture resistance of endodontically-treated teeth.

OBJECTIVES: The aim of this study was to evaluate the fracture resistance of endodontically-treated teeth restored with nano-hybrid composite resin, bulk-fill flowable and short fibre-reinforced-composite in the absence/presence of retention slots. MATERIALS AND METHODS: One hundred and ten extracted non-carious human mandibular molars received endodontic treatment followed by mesio-occlusodistal (MOD) cavities with 3 ± 0.2 mm thicknesses of buccal and lingual walls. Teeth were divided into two main groups according to the retention slot preparation. The dove-tail retention slots were prepared on the middle of opposite buccal and lingual walls to create mechanical interlocking. Each group was further divided into four sub-groups according to restorative material types: control (no restoration), nano-hybrid composite resin (Filtek™ Z550), bulk-fill flowable (Filtek™ Bulk Fill) and short fibre-reinforced-composite (everX Posterior™). Restored teeth were subjected to compressive load at a strain rate of 1 mm/min. The data were statistically analysed using two-way ANOVA and Tukey's test for multiple comparisons. RESULTS: The fracture resistance was significantly affected by the presence of the retentive slots and restorative material (p < 0.05). Restored teeth with retentive slots significantly increased the fracture resistance compared with restored teeth without retentive slots (p < 0.05). Short fibre-reinforced-composite with retentive slot cavities had significantly higher fracture resistance values compared with the other test groups (p < 0.05). CONCLUSIONS: The preparation of retention slots may increase the fracture resistance of endodontically-treated teeth, especially, when restored with short fibre-reinforced composite. The use of short fibre-reinforced composite with retentive slots could be an alternative technique to prevent cuspal fracture on endodontically-treated teeth with MOD cavity.

Effect of Different Torque Settings on Crack Formation in Root Dentin.

INTRODUCTION: The aim of the present study was to observe the incidence of cracks in root canal dentin using the ProTaper Universal system (Dentsply Maillefer, Ballaigues, Switzerland) at low- and high-torque settings. METHODS: Sixty-nine mandibular premolar teeth that had been extracted for different reasons were selected. The teeth were divided into 3 groups: an unprepared control group, a low-torque settings group (SX = 3, S1 = 2, S2 = 1, F1 = 1.5, F2 = 2, F3 = 2, F4 = 2 N/cm), and a high-torque settings group (SX = 4, S1 = 4, S2 = 1.5, F1 = 2, F2 = 3, F3 = 3, F4 = 3 N/cm). After a root canal procedure, all the teeth were horizontally sectioned at 2, 4, 6, and 8 mm from the apex. Then, under a stereomicroscope, all the slices were examined to determine the presence of cracks. A chi-square test was used for data analysis. The significance level was set at P = .05. RESULTS: There were no cracks in the unprepared control group. Vertical root fractures were not observed in any of the groups. There were significantly fewer cracks (17.4% of the sections) in the low-torque group than in the high-torque group (29.4% of the sections) (P < .05). CONCLUSIONS: In this in vitro study, the instrumentation of root canals with the ProTaper Universal instrument caused more crack formation in root canal dentin at high-torque than at low-torque settings.

Multidisciplinary Management of Complicated Crown-Root Fracture of an Anterior Tooth Undergoing Apexification.

The purpose of this case report was to present the multidisciplinary management of a subgingival crown-root fracture of a patient undergoing apexification treatment. A 12-year-old male patient was referred to the pediatric dentistry clinic with an extensive tooth fracture of the right permanent maxillary lateral incisor. Clinical and radiographic examinations revealed the presence of a complicated crown-root fracture, which had elongated to the buccal subgingival area. The dental history disclosed that the apexification procedure had been started to be performed after his first trauma experience and he had neglected his appointment. The coronal fragment was gently extracted; endodontic treatment was performed; flap surgery was performed to make the fracture line visible. The coronal fragment was reattached to the root fragment with a dual-cure luting composite. A fiber post was stabilized and the access cavity of the tooth was restored with composite resin. At the end of the 24th month, the tooth was asymptomatic, functionally, esthetically acceptable and had no periapical pathology. It is important for the patients undergoing apexification treatment to keep their appointments because of the fracture risk. Restoration of the fractured tooth by preparing retention grooves and a bonding fiber-reinforced post are effective and necessary approaches for successful management.

Effects of pulp capping materials on fracture resistance of Class II composite restorations.

OBJECTIVE: The aim of this study was to investigate the effect of cavity design and the type of pulp capping materials on the fracture resistance of Class II composite restorations. MATERIALS AND METHODS: Sixty freshly extracted, sound molar teeth were selected for the study. A dovetail cavity on the mesio-occlusal and a slot cavity on disto-occlusal surfaces of each tooth were prepared, and the teeth were divided 4 groups which one of them as a control group. The pulp capping materials (TheraCal LC, Calcimol LC, Dycal) applied on pulpo-axial wall of each cavity, and the restoration was completed with composite resin. The teeth were subjected to a compressive load in a universal mechanical testing machine. The surfaces of the tooth and restoration were examined under a stereomicroscope. The data were analyzed using factorial analysis of variance and Tukey's test. RESULTS: For pulp capping materials, the highest fracture load (931.15 ± 203.81 N) and the lowest fracture load (832.28 ± 245.75 N) were calculated for Control and Dycal group, respectively. However, there were no statistically significant differences among all groups (P > 0.05). The fracture load of the dovetail groups was significantly higher than those of the slot cavity groups (P < 0.05). CONCLUSION: Dovetail cavity design shows better fracture resistance in Class II composite restorations, independent of used or not used pulp capping materials.

Delayed replantation of avulsed teeth: two case reports.

This case report presents two cases of delayed replantation of avulsed maxillary central incisors after an extended dry extra-alveolar period. Eight-year-old boy and 10-year-old boy presented with avulsed maxillary central incisors due to trauma occurring 27 and 7 hours earlier, respectively. Treatment guidelines for avulsed mature/immature permanent teeth with prolonged extra-oral time were carried out for the teeth and the extra-oral endodontic treatment was completed. After having been repositioned, the teeth were stabilized for 4 weeks and prophylactic antibiotic was prescribed. Clinical and radiographic controls were done after 18 months for Case I and 12 months for Case II. During the follow-up periods the teeth reported in these cases have remained in a stable, functional position but revealed clinical initial replacement resorption and ankylosis.

A cone-beam computed tomographic study of root canal systems in mandibular premolars in a Turkish population: Theoretical model for determining orifice shape.

OBJECTIVE: The purposes of this retrospective study were to represent a newly designed theoretical model for determining orifice shape and morphologic properties of mandibular premolars and to correlate these findings with each other. MATERIALS AND METHODS: A total of 287 mandibular premolar images obtained from 88 patients by cone-beam computed tomography were included in this study. The measurements were performed below the cementoenamel junction, and different orifice configurations were defined in accordance with various ratios. The age and gender of the patient, the tooth type and position, the number of roots, orifice configuration, root canal configuration, presence of C-shaped canal, and the presence of radicular groove were recorded. It was also recorded whether the root canal becomes round or not and if any, length of the root canal from the orifice to the section in which it becomes round. Furthermore, the theoretical model for determining orifice shape was defined after measurements. The orifice shape was determined as round, oval, flat, keyhole-shaped, and T-shaped, and orifices with short, normal length, and long isthmus. Statistical analyses were performed using Chi-square and Spearman's rank correlation tests (P = 0.05). RESULTS: Orifice configurations were, usually, flat (37%), or keyhole-shaped (23%). The prevalence of T-shaped was found to be 3.8%. The prevalence of C-shaped canals was found to be 2.1%. The percentage of root canals that became round in the middle or apical thirds was 95.1%. Radicular grooves were detected in 37 (24%) of first premolars and six (4.5%) of second premolars. Statistical analysis revealed that the mean length of distance until the canal reached a round shape varied according to age group (r = -0.270; P < 0.001). There was a statistically significant difference between radicular groove and tooth type (P < 0.001). CONCLUSIONS: The mean length of distance until the canal reached a round shape correlated with the patient's age. The new theoretical model could be beneficial to determine orifice configurations.

Bond strength of self-adhesive resin cement to root dentin. Comparison of photon-initiated photoacoustic streaming technique with needle and ultrasonic irrigation.

OBJECTIVE: The aim of this study was to investigate the effects of photon-initiated photoacoustic streaming (PIPS) with various irrigating solutions on the bond strength of a self-adhesive resin cement to root dentin. MATERIALS AND METHODS: Seventy-two mandibular premolar roots were divided into six groups after post space preparation and treated with a needle irrigation with distilled water and NaOCl, ultrasonic irrigation with NaOCl, PIPS with NaOCl, PIPS with EDTA and PIPS with distilled water at 0.3 W, 15 Hz and 20 mJ per pulse for 60 s. Fiber posts were cemented with a newly marketed, self-adhesive resin cement. The data obtained from the push-out tests were analyzed using analysis of variance (ANOVA) and LSD post-hoc tests (p = 0.05). RESULTS: PIPS with distilled water resulted in higher push-out values than those of needle (with both distilled water and NaOCl) and ultrasonic irrigation (p < 0.05). CONCLUSIONS: The use of PIPS may provide higher bond strength of self-adhesive resin cement to root dentin than needle and ultrasonic irrigation techniques.

Comparison of bond strength of self-etch adhesive to pulp chamber dentin after placement of calcium hydroxide and various antibiotic pastes.

OBJECTIVE: The aim of this study was to evaluate the effect of calcium hydroxide, double antibiotic paste (DAP) and triple antibiotic paste (TAP) with minocycline, cefaclor and amoxicillin on the micro tensile bond strength (µTBS) of self-etch adhesive to pulp chamber dentin. MATERIALS AND METHODS: Sixty mandibular first molars were cut horizontally and randomly divided into a control group and five experimental groups, which received an intra-canal dressing, as follows: calcium hydroxide, DAP, TAP with minocycline, TAP with cefaclor and TAP with amoxicillin. After storing the specimens for 4 weeks, the medicaments were removed by irrigation with 10 mL each of the following solution: 2.5% NaOCl, 17% EDTA and distilled water. A self-etch adhesive (Clearfil S3 Bond, Okayama, Japan) was applied and composite resin (Clearfil Majesty Posterior, Kuraray Medical Inc., Japan) was placed into the cavity. A µTBS test was performed on each specimen using a universal test machine. RESULTS: The DAP reduced the µTBS of self-etch adhesive compared to the control group, calcium hydroxide and TAP with minocycline and with cefaclor (p < 0.05). However, the other medicaments did not result in a decreased µTBS of self-etch adhesive to pulp chamber dentin as compared to the control group (p > 0.05). CONCLUSIONS: The use of DAP resulted in a reduced µTBS of self-etch adhesive to pulp chamber dentin.

The effect of photon-initiated photoacoustic streaming, ultrasonically and sonically irrigation techniques on the push-out bond strength of a resin sealer to the root dentin.

OBJECTIVES: The present study investigated the effects of various irrigation activation techniques, including laser-activated irrigation using a laser with a novel tip design (photon-induced photoacoustic streaming, PIPS) on the bond strength of an epoxy resin-based sealer to root dentin. MATERIALS AND METHODS: Seventy-two single-rooted human mandibular premolars were prepared using the rotary system to size 40 and randomly divided into four groups (n = 18) according to the final irrigation activation technique used as follows: conventional irrigation (CI), laser-activated irrigation with PIPS (LAI-PIPS), passive ultrasonic irrigation (PUI), and sonic irrigation (SI) with 5 mL of 17 % EDTA and 2.5 % NaOCl. The root canals were then obturated with gutta-percha and AH PlusJet sealer. A push-out test was used to measure the bond strength between the root canal dentin and the sealer. The data were analyzed using the two-way analysis of variance and least significant difference (LSD) post hoc tests (P = 0.05). RESULTS: The LAI-PIPS and PUI resulted in higher push-out values compared to CI and SI (P < 0.05). There were no statistically significant differences between CI and SI (P = 0.978) and between LAI-PIPS and PUI (P = 0.051). There was a statistically significant interaction between the final irrigant activation techniques used and root canal thirds (P < 0.05). A chi-square test revealed no significant differences in the failure mode within the groups (P > 0.05). CONCLUSIONS: The use of LAI-PIPS and PUI can provide higher bond strength of resin sealer to root dentin compared to CI and SI techniques. CLINICAL RELEVANCE: The activation of the irrigant and the creation of the streaming have a positive effect on the bond strength of the resin sealer to root dentin.

Comparison of bleaching efficacy of two bleaching agents on teeth discoloured by different antibiotic combinations used in revascularization.

OBJECTIVES: To investigate the whitening effects of different bleaching agents on teeth discoloured by different antibiotic combinations of ciprofloxacin and metronidazole with minocycline, doxycycline, amoxicillin or cefaclor. MATERIALS AND METHODS: Forty extracted bovine incisors were collected and discoloured with triple antibiotic pastes (TAP) with minocycline, doxycycline, amoxicillin and cefaclor throughout 30 days. The specimens were then randomly divided into two subgroups and each group received different bleaching materials: 35% hydrogen peroxide and sodium perborate. Spectrophotometric measurements were obtained on the buccal surfaces of the crown, firstly in the beginning, then on the 4th, 8th and 12th days after the placement of the bleaching materials. The acceptability threshold was set to 3.5. The ∆E values were calculated and the data was analysed using the repeated measures analysis of variance (P = .05). RESULTS: All the test groups induced colour changes exceeding the acceptability threshold 30 days after the antibiotic pastes were placed. The 35% hydrogen peroxide was more effective than sodium perborate in the whitening of discoloured teeth by antibiotic pastes (P = .001). The whitening effect after the 8th and 12th days was significantly more than after 4 days of treatment (P <.001). The discolouration caused by the TAP with minocycline and cefaclor showed greater whitening compared to the TAP with doxycycline and amoxicillin groups (P <.05). CONCLUSIONS: The whitening treatment effect of 35% hydrogen peroxide on teeth discoloured by antibiotic pastes seems to have significantly outperformed the sodium perborate treatment. Both bleaching agents were allowed to bleach the teeth gradually each day and the effects on the 8th and 12th days were superior to the one on the 4th day. CLINICAL RELEVANCE: The use of 35% hydrogen peroxide could be advantageous to bleach the teeth discoloured with antibiotic pastes compared to sodium perborate.