Solid Self-Nanoemulsifying Drug Delivery Systems of Furosemide: In Vivo Proof of Concept for Enhanced Predictable Therapeutic Response.

Liquid self-nano emulsifying drug delivery systems (SNEDDS) of furosemide (FSM) have been explored as a potential solution for enhancing solubility and permeability but are associated with rapid emulsification, spontaneous drug release, and poor in vivo correlation. To overcome the shortcoming, this study aimed to develop liquid and solid self-emulsifying drug delivery systems for FSM, compare formulation dynamics, continue in vivo therapeutic efficacy, and investigate the advantages of solidification. For this purpose, liquid SNEDDS (L-SEDDS-FSM) were formed using oleic acid as an oil, chremophore EL, Tween 80, Tween 20 as a surfactant, and PEG 400 as a co-surfactant containing 53 mg/mL FSM. At the same time, solid SNEDDS (S-SEDDS-FSM) was developed by adsorbing liquid SNEDDS onto microcrystalline cellulose in a 1:1 ratio. Both formulations were evaluated for size, zeta potential, lipase degradation, and drug release. Moreover, in vivo diuretic studies regarding urine volume were carried out in mice to investigate the therapeutic responses of liquid and solid SNEDDS formulations. After dilution, L-SEDDS-FSM showed a mean droplet size of 115 ± 4.5 nm, while S-SEDDS-FSM depicted 116 ± 2.6 nm and zeta potentials of -5.4 ± 0.55 and -6.22 ± 1.2, respectively. S-SEDDS-FSM showed 1.8-fold reduced degradation by lipase enzymes in comparison to L-SEDDS-FSM. S-SEDDS-FSM demonstrated a sustained drug release pattern, releasing 63% of the drug over 180 min, in contrast to L-SEDDS-FSM, exhibiting 90% spontaneous drug release within 30 min. L-SEDDS-FSM exhibited a rapid upsurge in urine output (1550 ± 56 µL) compared to S-SEDDS-FSM, showing gradual urine output (969 ± 29 µL) till the 4th h of the study, providing sustained urine output yet a predictable therapeutic response. The solidification of SNEDDS effectively addresses challenges associated with spontaneous drug release and precipitation observed in liquid SNEDDS, highlighting the potential benefits of solid SNEDDS in improving the therapeutic response of furosemide.

Preparation of Tamsulosin Hydrochloride-Loaded Mucoadhesive In Situ Gelling Polymeric Formulation for Nasal Delivery in Geriatrics.

This study aimed to prepare tamsulosin hydrochloride (HCl)-loaded in situ gelling formulation by using hydroxypropyl methylcellulose (HPMC), gellan gum, poloxamer 188, and benzalkonium chloride. Physicochemical evaluation of formulations included determination of pH, viscosity, gelation time, gel strength, drug content, and sterility. In silico study was performed to analyze interactions between polymers, drug, and mucin glycoprotein. In vitro degradation time, drug release, ex vivo mucoadhesion time, permeation, in vivo pharmacokinetics, and stability studies were performed to assess the formulation. Formulations were transparent and displayed acceptable physicochemical attributes. Tamsulosin HCl and polymers interacted via non-covalent interactions. HPMC formed hydrogen bonds, hydrophobic and van der Waals interactions with mucin protein while the drug formed hydrogen bonds only. Gel formulation degraded in simulated nasal fluid within 24 h. In situ gelling formulation showed 83.8 ± 1.7% drug release and remained adhered to the mucosa for 24.5 ± 1 h. A higher (~ 1.85 times) drug permeation was recorded through mucosa within 6 h by in situ gelling formulation when compared to control counterparts (aqueous solution of drug and in situ gelling formulation without poloxamer 188). Nasal administration of tamsulosin HCl by using in situ gelling formulation led to a ~ 3.3 and ~ 3.5 times, respectively, higher Cmax (maximum plasma concentration) and AUCtotal (total area under the curve) than the orally administered aqueous solution. Relative bioavailability of drug delivered by nasal in situ gelling formulation was 3.5 times the oral counterpart. These results indicated that the prepared in situ gelling formulation can act as a promising candidate for systemic administration of tamsulosin HCl.

Exploring adequate CO2 elevation for optimum tomato growth and yield under protected cultivation.

The adequate elevation of CO2 concentrations (e [CO2]) could not be assessed by constrained analysis of comparative experimental study for optimum plant growth and yield with improved fruit quality owing to the lack of conjunctive investigation of plant parametric responses. Instead, the principal component analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS) assessed and quantified the parametric plant responses to identify the adequate level of e [CO2] for optimum plant growth and yield. In this study, tomato plants were grown under an ambient CO2 (a [CO2], 500 µmol mol-1) and three e [CO2] (700, 850 and 1000 µmol mol-1): named EC700, EC850 and EC1000, respectively, in autumn-winter (AW) 2020 and spring summer (SS) 2021 growing seasons to investigate and evaluate the plant parametric responses under e [CO2]. The tomato plant's response with maximum transportability of biomass to fruits was observed under 700 µmol mol-1. The plant height, stem diameter and LAI were enhanced compared to a [CO2] at the optimum level under 1000 µmol mol-1 (by 50.53, 20.98 and 44.44%) and 700 µmol mol-1 (by 22.41, 12.09 and 26.88%) in Aw 2020; Ss 2021, respectively. The optimum yield was increased under 700 µmol mol-1 by 73.95% and 55.58% in Aw 2020; Ss 2021, respectively. EC700 was ranked as a priority by TOPSIS with 0.632 and 0.694 plant response performance index in Aw 2020; Ss 2021, respectively, to get optimum tomato growth, yield, water use efficiency and fruit quality. The results of this study are beneficial for commercial greenhouse crop production by fumigating the adequate level of e [CO2], to reduce the cost of CO2 fertigation, enhance the yield and save the water quantity.

Factors affecting knowledge and attitude of healthcare workers towards basic life support in Khyber Teaching Hospital, Peshawar, Pakistan: a cross-sectional analysis.

OBJECTIVE: This study was conducted to assess the knowledge and attitude of healthcare workers towards basic life support (BLS) in Khyber Teaching Hospital, Peshawar, and to investigate the factors affecting them. DESIGN: Cross-sectional study. SETTING: This study was carried out in a tertiary care hospital in Peshawar, Pakistan. PARTICIPANTS: 201 healthcare professionals were recruited for this study through simple convenience sampling which included house officers (HOs), trained medical officers, postgraduate residents, professors, specialty registrars and nurses. Healthcare professionals who were reluctant to give consent were excluded from the study. RESULTS: Among the chosen participants, only 16.4% had good knowledge whereas 63% had a good attitude towards BLS. Knowledge of participants was found to be positively associated with less time elapsed between the training sessions (p=0.041). On the other hand, factors such as age(p=0.004), designation (p=0.05), number of BLS sessions attended (p=0.012) and the time elapsed since the last BLS session attended (p=0.015), were positively associated with the attitude of healthcare professionals. CONCLUSION: The level of knowledge and attitude towards BLS by healthcare professionals was suboptimal. Those individuals who had attended BLS training sessions frequently had better knowledge and attitude as compared with their counterparts.

In Silico Designing of Thieno[2,3-b]thiophene Core-Based Highly Conjugated, Fused-Ring, Near-Infrared Sensitive Non-fullerene Acceptors for Organic Solar Cells.

The performance of organic solar cells (OSCs) has been improving steadily over the last few years, owing to the optimization of device fabrication, fine-tuning of morphology, and thin-film processing. Thiophene core containing fused ring-type non-fullerene acceptors (NFAs) achieved significant proficiency for highly efficient OSCs. Quantum chemical computations are utilized herein with the motive of suggesting new NIR sensitive, highly efficient low-band gap materials for OSCs. A series of extended conjugated A-π-D-π-A architectured novel fused-ring NFAs (FUIC-1-FUIC-6) containing thieno[2,3-b]thiophene-based donor core are proposed by substituting the end-capped units of synthesized molecule F10IC. Different properties including frontier molecular orbital analysis, density of states analysis, transition density matrix analysis, excitation energy, reorganizational energies of both holes (λh) and electrons (λe), and open-circuit voltage (V oc) were performed employing the density functional theory approach. Charge transfer analysis of the best-designed molecule with the donor complex was analyzed to comprehend the efficiency of novel constructed molecules (FUIC-1-FUIC-6) and compared with the reference. End-caped acceptor alteration induces the reduction of the energy gap between HOMO-LUMO (1.88 eV), tunes the energy levels, longer absorption in the visible and near-infrared regions, larger V oc, smaller reorganizational energies, and binding energy values in designed structures (FUIC-1-FUIC-6) in comparison to reference (FUIC). The designed molecules show the best agreement with the PTBT-T donor polymer blend and cause the highest charge from the HOMO to the LUMO orbital. Our findings predicted that thieno[2,3-b] thiophene-based newly designed molecules would be efficient NFAs with outstanding photovoltaic characteristics and can be used in future applications of OSCs.

Formulation of ciprofloxacin-loaded oral self-emulsifying drug delivery system to improve the pharmacokinetics and antibacterial activity.

This study aims to increase the aqueous solubility of ciprofloxacin (CPN) to improve oral bioavailability. This was carried out by formulating a stable formulation of the Self-Emulsifying Drug Delivery System (SEDDS) using various ratios of lipid/oil, surfactant, and co-surfactant. A pseudo-ternary phase diagram was designed to find an area of emulsification. Eight formulations (F1-CPN-F8-CPN) containing oleic acid oil, silicone oil, olive oil, castor oil, sunflower oil, myglol oil, polysorbate-80, polysorbate-20, PEO-200, PEO-400, PEO-600, and PG were formulated. The resultant SEDDS were subjected to thermodynamic study, size, and surface charge studies to improve preparation. Improved composition of SEDDS F5-CPN containing 40% oil, 60% polysorbate-80, and propylene glycol (Smix ratio 6: 1) were thermodynamically stable emulsions having droplet size 202.6 nm, charge surface -13.9 mV, and 0.226 polydispersity index (PDI). Fourier transform infra-red (FT-IR) studies revealed that the optimized formulation and drug showed no interactions. Scanning electron microscope tests showed the droplets have an even surface and spherical shape. It was observed that within 5 h, the concentration of released CPN from optimized formulations F5-CPN was 93%. F5-CPN also showed a higher antibacterial action against S. aurous than free CPN. It shows that F5-CPN is a better formulation with a good release and high antibacterial activity.

Assessment of Antimicrobial Potential of Plagiochasma rupestre Coupled with Healing Clay Bentonite and AGNPS.

The impact of individual component, i.e., plant extract (Plagiochasma rupestre), biosynthesized silver nanoparticles (AgNPs), and healing clay (bentonite) as antimicrobial agent is reported but their combined effect as a ternary system is a new approach. This study is aimed at investigating the impact of the proposed ternary system against selected human pathogens. AgNPs were synthesized by using Plagiochasma rupestre extract (aqueous) as reducing agent and neutral polymer (PVP) as stabilizer. The morphology, size, and structural properties of synthesized AgNPs were determined with XRD and SEM analysis which showed spherical monomodal particles with an average particle size of 25.5 nm. The antibacterial and antifungal activities of the individual and nanoternary system were investigated. The phytochemical screening of plant extract showed the presence of alkaloids, flavonoids, phenol, and glycosides in methanol extract as compare to aqueous and acetone extract. The antimicrobial activities of crude extracts of Plagiochasma rupestre with AgNPs and bentonite clay were studied as an appropriate candidate for treatment of microbial infections, especially bacterial and fungal diseases. The antioxidant activity of Plagiochasma rupestre aqueous extract and nanoparticles was assessed by (DPPH) free radical, and absorbance was checked at 517 nm. Crude extract has inhibitory effect towards bacteria and fungi, and bentonite clay also showed some degree of antimicrobial resistance. Strategy can be efficiently applied for future engineering and medical. The nanoternary systems showed 3 and 3.5 times higher antibacterial and antifungal activity, respectively, in comparison to Plagiochasma rupestre and bentonite clay, individually.

Formulation of Polymers-Based Methotrexate Patches and Investigation of the Effect of Various Penetration Enhancers: In Vitro, Ex Vivo and In Vivo Characterization.

The present study aimed to prepare methotrexate-loaded transdermal patches with different blends of hydrophobic and hydrophilic polymers (Eudragit S-100 and hydroxypropyl methylcellulose) at different concentrations. The polymers employed in transdermal patches formulations served as controlled agent. Transdermal patches were prepared using the solvent casting technique. The suitable physicochemical properties were obtained from the formulation F5 (HPMC and Eudragit S-100 (5:1). Various penetration enhancers were employed in different concentrations to investigate their potential for enhancing the drug permeation profile from optimized formulations. A preformulation study was conducted to investigate drug-excipient compatibilities (ATR-FTIR) and the study showed greater compatibility between drug, polymers and excipients. The prepared patches containing different penetration enhancers at different concentrations were subjected for evaluating different physicochemical parameters and in vitro drug release studies. The obtained data were added to various kinetic models, then formulated patch formulations were investigated for ex vivo permeation studies, in vivo studies and skin drug retention studies. The prepared patches showed elastic, smooth and clear nature with good thickness, drug content, % moisture uptake and weight uniformity. The prepared transdermal patches showed % drug content ranging from 91.43 ± 2.90 to 98.37 ± 0.56, % swelling index from 36.98 ± 0.19 to 75.32 ± 1.21, folding endurance from 61 ± 3.14 to 78 ± 1.54 and tensile strength from 8.54 ± 0.18 to 12.87 ± 0.50. The formulation F5, containing a greater amount of hydrophilic polymers (HPMC), showed increased drug release and permeation and drug retention when compared to other formulated transdermal patch formulations (F1-F9). No significant change was observed during a stability study for a period of 60 days. The rabbit skin samples were subjected to ATR-FTIR studies, which revealed that polymers and penetration enhancers have affected skin proteins (ceramides and keratins). The pharmacokinetic profiling of optimized formulation (F5) as well as formulations with optimized concentrations of penetration enhancers revealed Cmax ranged 167.80 ng/mL to 178.07 ± 2.75 ng/mL, Tmax was 8 h to 10 h, and t1/2 was 15.9 ± 2.11 to 21.49 ± 1.16. From the in vivo studies, it was revealed that the formulation F5-OA-10% exhibited greater skin drug retention as compared to other formulations. These results depicted that prepared methotrexate transdermal patches containing different blends of hydrophobic and hydrophilic polymers along with different penetration enhancers could be safely used for the management of psoriasis. The formulated transdermal patches exhibited sustained release of drug with good permeations and retention profile. Hence, these formulated transdermal patches can effectively be used for the management of psoriasis.

Development of mucus-penetrating iodine loaded self-emulsifying system for local vaginal delivery.

The major goal of this project was to formulate iodine-based self nano-emulsifying drug delivery system to provide improve antimicrobial activity and enhanced mucosal residence time via mucus penetration. Iodine SNEDDS (Self nano-emulsifying drug delivery system) with different concentration were formulated using castor oil as the oil phase, cremophor ethoxylated (CrEL) as a surfactant and after screening a number of vehicles, PEG 400 was employed as co-surfactant. Self-emulsification time, thermodynamic stability tests, robustness to dilution, percent transmittance, droplet size, and drug release were measured. Ternary phase diagrams were plotted to determine the area of emulsification. When compared to the commercial formulation, dissolving experiments revealed that the iodine from the SNEDDS enhanced aqueous solubility. In-vitro iodine release was determined to be around 15% per hour, with muco-adhesive and, muco-penetrating characteristics showing a 38-fold improvement. Furthermore, SNEDDS demonstrated significant antibacterial efficacy against Escherichia coli and Staphylococcus aureus. Similarly, when compared to marketed drugs, in-vitro drug absorption profile from the manufactured SNEDDS shown to be much higher. According to these results iodine containing SNEDDS could be a useful new formulation for iodine mucosal usage.

Design, Preparation, and Evaluation of Enteric Coating Formulation of HPMC and Eudragit L100 on Carboxylated Agarose Hydrogel by Using Drug Tartrazine.

Enteric-coated application on drug is used to prevent the drug from inactivation which are degraded by gastric enzyme. The present study is aimed at achieving controlled drug delivery in acidic medium of gastrointestinal tract (GIT) by enteric coating of hydroxy propyl methylcellulose (HPMC) and Eudragit L100 on carboxylated agarose hydrogel, creating a pH-dependent delivery system. Fourier-transformed infrared spectroscopy (FTIR) was for the detection of carboxylic group on agarose hydrogel, and scanning electron microscope (SEM) was used for the determination surface of prepared formulation. To check the pH sensitivity of enteric-coated formulation, different pH solution was used. It was found that the formulation was not dissolved in 1.2 but dissolve in pH 6.8 similarly; hydrogels lacking coating showed that tartrazine was more dissolved in pH 1.2, and less dissolved at pH 6.8. The release of tartrazine from the hydrogels was measured by using spectrophotometer and using a scanning electron microscope to examine the morphology and surface appearance of hydrogel capsules. This study revealed cracks on coated samples, while noncoated samples showed clear appearance with no cracks. Our findings revealed that this method could be useful for the development of an enteric coating drug delivery system.

Thiolated Chitosan Microneedle Patch of Levosulpiride from Fabrication, Characterization to Bioavailability Enhancement Approach.

In this study, a first attempt has been made to deliver levosulpiride transdermally through a thiolated chitosan microneedle patch (TC-MNP). Levosulpiride is slowly and weakly absorbed from the gastrointestinal tract with an oral bioavailability of less than 25% and short half-life of about 6 h. In order to enhance its bioavailability, levosulpiride-loaded thiolated chitosan microneedle patches (LS-TC-MNPs) were fabricated. Firstly, thiolated chitosan was synthesized and characterized by nuclear magnetic resonance (1HNMR) spectroscopy, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Thiolated chitosan has been used in different drug delivery systems; herein, thiolated chitosan has been used for the transdermal delivery of LS. LS-TC-MNPs were fabricated from different concentrations of thiolated chitosan solution. Furthermore, the levosulpiride-loaded thiolated chitosan microneedle patch (LS-TC-MNP) was characterized by FTIR spectroscopic analysis, scanning electron microscopy (SEM) study, penetration ability, tensile strength, moisture content, patch thickness, and elongation test. LS-TC-MNP fabricated with 3% thiolated chitosan solution was found to have the best tensile strength, moisture content, patch thickness, elongation, drug-loading efficiency, and drug content. Thiolated chitosan is biodegradable, nontoxic and has good absorption and swelling in the skin. LS-TC-MNP-3 consists of 100 needles in 10 rows each with 10 needles. The length of each microneedle was 575 µm; they were pyramidal in shape, with sharp pointed ends and a base diameter of 200 µm. The microneedle patch (LS-TC-MNP-3) resulted in-vitro drug release of 65% up to 48 h, ex vivo permeation of 63.6%, with good skin biocompatibility and enhanced in-vivo pharmacokinetics (AUC = 986 µg/mL·h, Cmax = 24.5 µg/mL) as compared to oral LS dispersion (AUC = 3.2 µg/mL·h, Cmax = 0.5 µg/mL). Based on the above results, LS-TC-MNP-3 seems to be a promising strategy for enhancing the bioavailability of levosulpiride.

Synthesis and Characterization of Acrylamide/Acrylic Acid Co-Polymers and Glutaraldehyde Crosslinked pH-Sensitive Hydrogels.

This project aims to synthesize and characterize the pH-sensitive controlled release of 5-fluorouracil (5-FU) loaded hydrogels (5-FULH) by polymerization of acrylamide (AM) and acrylic acid (AA) in the presence of glutaraldehyde (GA) as a crosslinker with ammonium persulphate as an initiator. The formulation's code is named according to acrylamide (A1, A2, A3), acrylic acid (B1, B2, B3) and glutaraldehyde (C1, C2, C3). The optimized formulations were exposed to various physicochemical tests, namely swelling, diffusion, porosity, sol gel analysis, and attenuated total reflection-Fourier transform infrared (ATR-FTIR). These 5-FULH were subjected to kinetic models for drug release data. The 5-FU were shown to be soluble in distilled water and phosphate buffer media at pH 7.4, and sparingly soluble in an acidic media at pH 1.2. The ATR-FTIR data confirmed that the 5-FU have no interaction with other ingredients. The lowest dynamic (0.98 ± 0.04% to 1.90 ± 0.03%; 1.65 ± 0.01% to 6.88 ± 0.03%) and equilibrium swelling (1.85 ± 0.01% to 6.68 ± 0.03%; 10.12 ± 0.02% to 27.89 ± 0.03%) of formulations was observed at pH 1.2, whereas the higher dynamic (4.33 ± 0.04% to 10.21 ± 0.01%) and equilibrium swelling (22.25 ± 0.03% to 55.48 ± 0.04%) was recorded at pH 7.4. These findings clearly indicated that the synthesized 5-FULH have potential swelling characteristics in pH 6.8 that will enhance the drug's release in the same pH medium. The porosity values of formulated 5-FULH range from 34% to 62% with different weight ratios of AM, AA, and GA. The gel fractions data showed variations ranging from 74 ± 0.4% (A1) to 94 ± 0.2% (B3). However, formulation A1 reported the highest 24 ± 0.1% and B3 the lowest 09 ± 0.3% sol fractions rate among the formulations. Around 20% drug release from the 5-FULH was found at 1 h in an acidic media (pH1.2), whereas >65% of drug release (pH7.4) was observed at around 25 h. These findings concluded that GA crosslinked 5-FU loaded AM and AA based hydrogels would be a potential pH-sensitive oral controlled colon drug delivery carrier.

COVID-19 vaccine reluctance and possible driving factors: A comparative assessment among pregnant and non-pregnant women.

The coronavirus disease of 2019 (COVID-19) constitutes a serious threat to pregnant women. One of the key strategies for preventing and managing the COVID-19 epidemic is vaccination. Herd immunity is significantly hampered by COVID-19 vaccine reluctance, which poses a potential threat to population health. Therefore, the present work intends to ascertain the incidence and severity of COVID-19 vaccine hesitancy among Pakistani pregnant women, the determinants driving their decision, and a comparative assessment with non-pregnant participants. This cross-sectional survey was carried out from November 2021 to February 2022. The validated vaccination attitude examination (VAX) scale about vaccination reluctance was undertaken by participants, who were also required to indicate whether they would be inclined to acquire the COVID-19 vaccine along with the reasons for reluctance. In comparison to the non-pregnant category with 353 participants, the group of 372 pregnant participants who responded to the questionnaire had a much greater proportion of hesitant respondents. Likewise, contrasted to 31% of non-pregnant participants, about 40% of them attributed their willingness to get vaccinated against coronavirus to social media. They also demonstrated a considerably stronger mean score on all subcategories of the VAX measure. The adjusted odd ratio findings showed that the independent factors for vaccine reluctance appeared to be trusting rumors on social media (adj OR: 2.58), not being afraid of covid-19 (adj OR: 2.01), not believing in COVID-19 existence (adj OR: 2.53), and not believing in vaccines (adj OR: 4.25). Uncertainty about the COVID-19 vaccine is very prevalent among expectant mothers. The investigation accentuates the pressing need to administer COVID-19 vaccination to the general public, including expectant mothers who might be anxious about the vaccine.

Fabrication of Tizanidine Loaded Patches Using Flaxseed Oil and Coriander Oil as a Penetration Enhancer for Transdermal Delivery.

Transdermal drug delivery is important to maintain plasma drug concentrations for therapeutic efficacy. The current study reports the design, formulation, and evaluation of tizanidine transdermal patches formulated using chitosan and thiolated chitosan, ethyl cellulose (EC), polyvinylpyrrolidone (PVP), and Eudragit RL100 in different ratios. The tizanidine patches were formulated using flaxseed oil and coriander oil in the concentrations of 1% v/w, 2% v/w, 3% v/w, 4% v/w, 5% v/w, and 10% v/w. The patches were subjected to characterization of physicochemical property (thickness, weight uniformity, drug content, efficiency, percentage moisture uptake/loss), in vitro drug release and drug permeation, skin irritation, in vivo application, pharmacokinetics analysis, and stability studies. The results indicate that the interaction of thiolated chitosan with the negative charges of the skin opens the tight junctions of the skin, whereas flaxseed and coriander oils change the conformational domain of the skin. The novelty of this study is in the use of flaxseed and coriander oils as skin permeation enhancers for the formulation of tizanidine transdermal patches. The formulations follow non-Fickian drug release kinetics. The FTZNE23, FTZNE36 and FTZNE54, with 5% v/w flaxseed oil loaded formulations, exhibited higher flux through rabbit skin compared with FTZNE30, FTZNE35, FTZNE42, and FTZNE47, formulations loaded with 10% v/w coriander oil. The study concludes that flaxseed oil is a better choice for formulating tizanidine patches, offering optimal plasma concentration and therapeutic efficacy, and recommends the use of flaxseed and coriander oil based patches as a novel transdermal delivery system for tizanidine and related classes of drugs.

Microemulsified Gel Formulations for Topical Delivery of Clotrimazole: Structural and In Vitro Evaluation.

Microemulsified gels (µEGs) with fascinating functions have become indispensable as topical drug delivery systems due to their structural flexibility, high stability, and facile manufacturing process. Topical administration is an attractive alternative to traditional methods because of advantages such as noninvasive administration, bypassing first-pass metabolism, and improving patient compliance. In this article, we report on the new formulations of microemulsion-based gels suitable for topical pharmaceutical applications using biocompatible and ecological ingredients. For this, two biocompatible µE formulations comprising clove oil/Brij-35/water/ethanol (formulation A) and clove oil/Brij-35/water/1-propanol (formulation B) were developed to encapsulate and improve the load of an antimycotic drug, Clotrimazole (CTZ), and further gelatinized to control the release of CTZ through skin barriers. By delimiting the pseudo-ternary phase diagram, optimum µE formulations with clove oil (∼15%) and Brij-35 (∼30%) were developed, keeping constant surfactant/co-surfactant ratio (1:1), to upheld 2.0 wt % CTZ. The as-developed formulations were further converted into smart gels by adding 2.0 wt % carboxymethyl cellulose (CMC) as a cross-linker to adhere to the controlled release of CTZ through complex skin barriers. Electron micrographs show a fine, monodispersed collection of CTZ-µE nanodroplets (∼60 nm), which did not coalesce even after gelation, forming spherical CTZ-µEG (∼90 nm). However, the maturity of CTZ nanodroplets observed by dynamic light scattering suggests the affinity of CTZ for the nonpolar microenvironment, which was further supported by the peak-to-peak correlation of Fourier transform infrared (FTIR) analysis and fluorescence measurement. In addition, HPLC analysis showed that the in vitro permeation release of CTZ-µEG from rabbit skin in the ethanolic phosphate buffer (pH = 7.4) was significantly increased by >98% within 6.0 h. This indicates the sustained release of CTZ in µEBG and the improvement in transdermal therapeutic efficacy of CTZ over its traditional topical formulations.

Chitosan-Coated 5-Fluorouracil Incorporated Emulsions as Transdermal Drug Delivery Matrices.

The purpose of the present study was to develop emulsions encapsulated by chitosan on the outer surface of a nano droplet containing 5-fluorouracil (5-FU) as a model drug. The emulsions were characterized in terms of size, pH and viscosity and were evaluated for their physicochemical properties such as drug release and skin permeation in vitro. The emulsions containing tween 80 (T80), sodium lauryl sulfate, span 20, and a combination of polyethylene glycol (PEG) and T20 exhibited a release of 88%, 86%, 90% and 92%, respectively. Chitosan-modified emulsions considerably controlled the release of 5-FU compared to a 5-FU solution (p < 0.05). All the formulations enabled transportation of 5-FU through a rat's skin. The combination (T80, PEG) formulation showed a good penetration profile. Different surfactants showed variable degrees of skin drug retention. The ATR-FTIR spectrograms revealed that the emulsions mainly affected the fluidization of lipids and proteins of the stratum corneum (SC) that lead to enhanced drug permeation and retention across the skin. The present study concludes that the emulsions containing a combination of surfactants (Tween) and a co-surfactant (PEG) exhibited the best penetration profile, prevented the premature release of drugs from the nano droplet, enhanced the permeation and the retention of the drug across the skin and had great potential for transdermal drug delivery. Therefore, chitosan-coated 5-FU emulsions represent an excellent possibility to deliver a model drug as a transdermal delivery system.

HantavirusesDB: Vaccinomics and RNA-based therapeutics database for the potentially emerging human respiratory pandemic agents.

Hantaviruses are etiological agents of several severe respiratory illnesses in humans and their human-to-human transmission has been reported. To cope with any potential pandemic, this group of viruses needs further research and a data platform. Therefore, herein we developed a database "HantavirusesDB (HVdb)", where genomics, proteomics, immune resource, RNAi based therapeutics and information on the 3D structures of druggable targets of the Orthohantaviruses are provided on a single platform. The database allows the researchers to effectively map the therapeutic strategies by designing multi-epitopes subunit vaccine and RNA based therapeutics. Moreover, the ease of the web interface allow the users to retrieve specific information from the database. Because of the high quality and excellent functionality of the HVdb, therapeutic research of Hantaviruses can be accelerated, and data analysis might be a foundation to design better treatment strategies targeting the hantaviruses. The database is accessible at http://hvdb.dqweilab-sjtu.com/index.php.

Estimation of polymorphisms in the drug-metabolizing enzyme, cytochrome P450 2C19 gene in six major ethnicities of Pakistan.

Interindividual differences in cytochrome P450 (CYP) 2C19 activity may result in variations in the therapeutic response to drugs metabolized by this enzyme. Differences at gene level may translate into protein level with consequent impairment of the enzyme activity. As a result patients with such genetic differences might experience undesirable effects or no effect at all. The aim of the present study was to find out the prevalence of allelic and genotype frequencies of low activity variants of CYP2C19 genes in healthy individuals from six distinct ethnicities of Pakistan. Blood sample was taken from healthy volunteers following informed consent. Isolation of the DNA was followed by the PCR amplification and restriction fragment length polymorphism. Selected samples were sequenced by Sanger sequencing. The frequency of major alleles was 84.93% for CYP2C19*2 and 91.85% for CYP2C19*3, while minor allele was present at 15.06% for CYP2C19*2 and 8.14% for CYP2C19*3. For CYP2C19*2, the frequency of *1*1 genotype was 75.80%, *1*2 was 18.27%, and *2*2 was 5.92% whereas for CYP2C19*3, The frequency of *1*1 genotype was 84.19%, *1*3 was 15.30%, and *3*3 was 0.49% in the Pakistani population. A substantial variation in genotype and allelic frequencies was observed in various ethnicities. Our study demonstrates that a significant Pakistani population has at least one minor allele, which indicates a large number of patients potentially being affected by these variations. Especially, a significant genotype frequency of PM suggests implication for the treatment response and severity/frequency of adverse effects in patients receiving drugs metabolized by CYP2C19.

Methotrexate-Loaded Gelatin and Polyvinyl Alcohol (Gel/PVA) Hydrogel as a pH-Sensitive Matrix.

The aim was to formulate and evaluate Gel/PVA hydrogels as a pH-sensitive matrix to deliver methotrexate (MTX) to colon. The primed Gel/PVA hydrogels were subjected to evaluation for swelling behavior, diffusion coefficient, sol-gel characteristic and porosity using an acidic (pH 1.2) and phosphate buffer (PBS) (pH 6.8 & pH 7.4) media. Fourier transform infrared spectroscopy (FTIR) and thermal gravimetric analysis (TGA) were performed to evaluate the chemical compatibility of the Gel/PVA hydrogel. The shape alteration and release of Gel/PVA hydrogel was conducted at pH 1.2, pH 6.8 and pH 7.4. The drug release kinetic mechanism was determined using various kinetic equations. The physicochemical evaluation tests and drug release profile results were found to be significant (p < 0.01). However, it was dependent on the polymers' concentration, the pH of the release media and the amount of the cross-linking agent. Hydrogels containing the maximum amount of gel showed a dynamic equilibrium of 10.09 ± 0.18 and drug release of 93.75 ± 0.13% at pH 1.2. The kinetic models showed the release of MTX from the Gel/PVA hydrogel was non-Fickian. The results confirmed that the newly formed Gel/PVA hydrogels are potential drug delivery systems for a controlled delivery of MTX to the colon.

In Vitro Anticancer Potential of Berberis lycium Royle Extracts against Human Hepatocarcinoma (HepG2) Cells.

Human liver cancer has emerged as a serious health concern in the world, associated with poorly available therapies. The Berberis genus contains vital medicinal plants with miraculous healing properties and a wide range of bioactivities. In this study, different crude extracts of B. lycium Royle were prepared and screened against Human Hepatocarcinoma (HepG2) cell lines. The water/ethanolic extract of B. lycium Royle (BLE) exhibited significant antiproliferative activity against the HepG2 cancer cell line with an IC50 value of 47 µg/mL. The extract decreased the clonogenic potential of HepG2 cells in a dose-dependent manner. It induced apoptotic cell death in HepG2 cells that were confirmed by cytometric analysis and microscopic examination of cellular morphology through DAPI-stained cells. Biochemical evidence of apoptosis came from elevating the intracellular ROS level that was accompanied by the loss of mitochondrial membrane potential. The mechanism of apoptosis was further confirmed by gene expression analysis using RT-qPCR that revealed the decline in Bcl-2 independent of p53 mRNA and a rise in CDK1 while downregulating CDK5, CDK9, and CDK10 mRNA levels at 48 h of BLE treatment. The most active fraction was subjected to HPLC which indicated the presence of berberine (48 µg/mL) and benzoic acid (15.8 µg/mL) as major compounds in BLE and a trace amount of luteolin, rutin, and gallic acid. Our study highlighted the importance of the most active BLE extract as an excellent source of nutraceuticals against Human Hepatocarcinoma that can serve as an herbal natural cure against liver cancer.