Construction of recombinant Omp25 or EipB protein loaded PLGA nanovaccines for Brucellosis protection.

Safe and effective vaccine candidates are needed to address the limitations of existing vaccines against Brucellosis, a disease responsible for substantial economic losses in livestock. The present study aimed to encapsulate Omp25 and EipB proteins, knowledged antigen properties, into PLGA nanoparticles, characterize synthesized nanoparticles with different methods, and assessed their in vitro/in vivo immunostimulatory activities to develop new vaccine candidates. The rOmp25 and EipB proteins produced with recombinant DNA technology were encapsulated into PLGA nanoparticles by double emulsion solvent evaporation technique. The nanoparticles were characterized using SEM, Zeta-sizer, and FTIR instruments to determine size, morphology, zeta potentials, and polydispersity index values, as well as to analyze functional groups chemically. Additionally, the release profiles and encapsulation efficiencies were assessed using UV-Vis spectroscopy. After loading with recombinant proteins, O-NPs reached sizes of 221.2±5.21 nm, while E-NPs reached sizes of 274.4±9.51 nm. The cumulative release rates of the antigens, monitored until the end of day 14, were determined to be 90.39% for O-NPs and 56.1% for E-NPs. Following the assessment of the in vitro cytotoxicity and immunostimulatory effects of both proteins and nanoparticles on the J774 murine macrophage cells, in vivo immunization experiments were conducted using concentrations of 16 µg/ml for each protein. Both free antigens and antigen-containing nanoparticles excessively induced humoral immunity by increasing produced Brucella-specific IgG antibody levels for 3 times in contrast to control. Furthermore, it was also demonstrated that vaccine candidates stimulated Th1-mediated cellular immunity as well since they significantly raised IFN-gamma and IL-12 cytokine levels in murine splenocytes rather than IL-4 following to immunization. Additionally, the vaccine candidates conferred higher than 90% protection from the infection according to challenge results. Our findings reveal that PLGA nanoparticles constructed with the encapsulation of recombinant Omp25 or EipB proteins possess great potential to trigger Brucella-specific humoral and cellular immune response.

Propolis-Loaded Poly(lactic-co-glycolic Acid) Nanofibers: An In Vitro Study.

Nanofibers have high potential through their high porosity, small pore sizes, lightweight materials, and their ability to mimic the extracellular matrix structure for use in the manufacture of wound dressings for wound treatment. In this study, poly(lactic-co-glycolic acid) (PLGA) nanofibers were produced by electrospinning. Propolis was loaded into the PLGA nanofibers by the dropping method. The average diameters and effects of propolis loading on the morphology of 37.5, 50, and 100% propolis-loaded PLGA nanofibers (PLGA-P37.5, PLGA-P50, and PLGA-P100) were evaluated by scanning electron microscopy (SEM). The successful loading of propolis into PLGA nanofibers was confirmed with Fourier transform infrared spectroscopy (FTIR) analysis. In vitro propolis release was examined at physiological pH. The antioxidant activity of propolis-loaded nanofibers was studied with 2,2-diphenyl-1-picrylhydrazyl (DPPH). Antimicrobial activities of the nanofibers against Escherichia coli, Staphylococcus aureus and Candida albicans strains were determined by the disk diffusion method. Consequently, PLGA-P50 and PLGA-P100 showed high antimicrobial activity on S. aureus and C. albicans. Cell viability was tested by 3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay, and propolis-loaded PLGA nanofibers were found to be biocompatible with human fibroblast cells. In the wound scratch assay, propolis-loaded nanofibers supported wound closure with cell migration and proliferation. Thus, in vitro wound closure properties of propolis-loaded PLGA nanofibers were evaluated for the first time in the literature.

Recombinant proteins production in Escherichia coli BL21 for vaccine applications: a cost estimation of potential industrial-scale production scenarios.

Recent SARS-CoV-2 pandemic elevated research interest in microorganism-related diseases, and protective health application importance such as vaccination and immune promoter agents emerged. Among the production methods for proteins, recombinant technology is an efficient alternative and frequently preferred method. However, since the production and purification processes vary due to the protein nature, the effect of these differences on the cost remains ambiguous. In this study, brucellosis and its two important vaccine candidate proteins (rOmp25 and rEipB) with different properties were selected as models, and industrial-scale production processes were compared with the SuperPro Designer® for estimating the unit production cost. Simulation study showed raw material cost by roughly 60% was one of the barriers to lower-cost production and 52.5 and 559.8 $/g were estimated for rEipB and rOmp25, respectively.

HighlightsTechno-economic evaluation of recombinant protein produced for vaccine purposesRecombinant proteins rOmp25 and rEipB production process using E.coli BL21Effect of outer membrane and periplasmic space proteins on purification costSimulated cost estimation of rEipB and rOmp25 were 52.5 and 559.8 $/g, respectively.

Time-dependent change in the microbiota structure of seminal stains exposed to indoor environmental.

Seminal stains acquired from fabric surfaces stand as pivotal biological evidence of utmost significance for elucidating sexual assault cases. The ability to determine the temporal aspect of a forensic incident via the analysis of a biological specimen found at the crime scene is crucial in resolving most cases. This study aimed to investigate the time-dependent change in the microbiota structure of human seminal stains exposed to indoor environmental conditions. Stains on polyester fabric generated using semen samples from five male volunteers were kept indoors for varying durations of up to 20 days, followed by sequencing of the V1-V9 regions of the 16S rRNA gene of the microbial DNA extracted from the stains. The acquired data provided the taxonomic composition, and microbial alterations across different days were examined. The most abundantly detected phyla in all samples were Firmicutes, Proteobacteria, and Bacteroidetes, and the relative abundances of bacteria were observed to change over time. Statistically significant changes at the species level were found for Treponema medium, Corynebacterium tuberculostearicum, Faecalibacterium prausnitzii, and Anaerostipes hadrus. Alterations observed in the samples between the analyzed time periods were investigated. The changes during the specified time periods were examined, identifying rare bacterial species that were initially present on certain days but later ceased to exist in the environment. Conversely, bacterial species that were absent before exposure but emerged at a later stage were also identified. The findings of this study demonstrate that species-level evaluations, in particular, can provide crucial insights into semen stain age.

Ketoconazole-loading strategy to improve antifungal activity and overcome cytotoxicity on human renal proximal tubular epithelial cells.

Ketoconazole (KTZ), an antifungal agent used to treat localized or systemic fungal infections by inhibiting ergosterol synthesis, exhibits restricted efficacy within eukaryotic cells owing to its elevated toxicity and limited solubility in water. This study aims to improve the biological activity and overcome cytotoxic effects in the renal system of the hydrophobic KTZ by incorporating it into poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) utilizing biomaterial nano-engineering techniques. KTZ-loaded PLGA NPs (KTZ-NPs) were prepared by single emulsion solvent evaporation method and characterized by using dynamic light scattering (DLS), electrophoretic light scattering (ELS), Fourier transform-infrared (FT-IR) spectroscopy and scanning light microscopy (SEM). Particle size and zeta potential of KTZ-NPs were determined as 182.0 ± 3.27 nm and -27.4 ± 0.56 mV, respectively. Antifungal activity was analyzed with the time-kill and top agar dilution methods onCandida albicans(C. albicans) andAspergillus flavus(A. flavus). Both KTZ and KTZ-NPs caused a significant decrease inA. flavuscell growth; however, the same effect was only observed in time-killing analysis onC. albicans, indicating a methodological difference in the antifungal analysis. According to the top agar method, the MIC value of KTZ-NPs againstA. flavuswas 9.1µg ml-1, while the minimum inhibition concentration (MIC) value of KTZ was 18.2µg ml-1. The twofold increased antifungal activity indicates that nanoparticular drug delivery systems enhance the water solubility of hydrophobic drugs. In addition, KTZ-NPs were not cytotoxic on human renal proximal tubular epithelial cells (HRPTEpCs) at fungistatic concentration, thus reducing fungal colonization without cytotoxic on renal excretion system cells.

Design of a bactericidal hydrogel scaffold containing genipin crosslinked HF-18 peptide.

Wound healing is a process getting affected by internal and external factors and might be interrupted by infections. To overcome infections during wound healing, novel antibacterial agents such as antimicrobial peptides have gained popularity because of the rising antibiotic resistance. Therefore, in this study, a three-dimensional polymeric scaffold was designed for the controlled release of HF-18 peptide, with the contribution of hyaluronic acid, chondroitin sulfate, and chitosan polymers with the crosslinker genipin. The obtained scaffold structure (OPT) was found to have interconnected pores, was pH-responsive and swelled more in acidic conditions (5446.5% at pH: 5.0). It was observed that HF-18-loaded OPT (P-OPT) was able to release HF-18 peptide both in acidic and neutral conditions in a controlled release manner. This study also demonstrated that both OPT and P-OPT were biocompatible and promoted L929 cell attachment and migration. Antimicrobial activity assessments demonstrated that P-OPT was effectively bactericidal on Staphylococcus aureus and methicillin-resistant S. aureus. Moreover, OPT produced a synergistic effect on the antimicrobial activity of HF-18 peptide, as P-OPT showed activity below the reported MIC value. As a result, OPT is considered a promising scaffold as a carrier for HF-18 for wound healing.

Caffeic Acid Phenethyl Ester Loaded Electrospun Nanofibers for Wound Dressing Application.

Electrospinning is an advantageous method with a wide usage area, which enables the production of materials consisting of nano-thickness fibers. In this study, caffeic acid phenethyl ester (CAPE) molecule was loaded onto the poly(lactic-co-glycolic acid) (PLGA) nanofibers and obtained nanofibers were physicochemically and biologically investigated for the first time in the literature. The existence of CAPE molecules, loaded on PLGA membranes by dropping and spraying methods, was evaluated by a comparative investigation of Fourier-transform infrared (FTIR) spectra and X-Ray diffraction (XRD) patterns. Fiber morphology of the membranes was investigated by scanning electron microscope (SEM). CAPE release and swelling behaviors of the membranes were studied in vitro. The radical scavenging activity of CAPE-loaded wound dressing materials was determined by using an antioxidant assay. The antimicrobial properties of PLGA and CAPE-loaded PLGA membranes were evaluated against S. aureus, P. aeruginosa and C. albicans strains by the time-kill method. The biocompatibility study of the obtained CAPE-loaded fibers conducted on human fibroblast cell line and wound healing promoting effect of the fibers was investigated in vitro scratch assay. The results show that CAPE-loaded PLGA membranes are highly antimicrobial against all strains used in the experiment. Additionally, the results show that they are biocompatible and have wound healing properties on human fibroblasts.

Assessment of the exclusion potential of suspects by using microbial signature in sexual assault cases: A scenario-based experimental study.

Sexual assault offences are one of the most serious crimes committed against a person, typically rank only second to homicide, and represent one of the major challenges in forensic sciences. In some cases of sexual assault, there may be more than one suspect and the analysis of the biological evidence with currently available methods such as human DNA analysis may not yield results. In this study using the designed experimental model (with different experimental scenarios that can be designed), it was aimed to investigate the effectiveness of the microbiome profile for the identification of the offender by comparing the microbiome structures of the suspects' saliva samples with the mixed samples on the victim (saliva transmitted on breast skin) within the first 48 h after a sexual assault. For this purpose, a total of 44 samples was collected from four healthy females and four healthy males aged 20-50 years. Microbiome profiles of 44 samples in four groups containing saliva, breast skin and mixed samples were determined with the IIlumina HiSeq platform. Differentiation between samples were calculated by beta-diversity analysis methods by using QIIME software (v1.80). To compare the differentiation among samples and groups, unweighted UniFrac distance values were applied. Eight dominant microbial genera accounted for 86.15% of the total bacterial population in male saliva samples and were composed of Fusobacterium, Haemophilus, Neisseria, Porphyromonas, Prevotella, Rothia, Streptococcus and Veillonella. These genera constituted 76.72% of the bacterial population in mixed samples, whereas they constituted 34.40% of the bacterial population in the breast skin samples. Results of this study show that bacterial DNA in saliva can be recovered from saliva transmitted breast skin within at least 48 h. In conclusion, it has been found that examination of the microbiota of the saliva transmitted to breast skin of a sexual assault victim as a forensic tool may have the potential to determine the offender of the incident among the suspects or to reduce the number of suspects. Supporting the results of this study with further studies using parameters such as different case models, different body regions, larger time periods and a higher number of participants will be beneficial to draw accurate conclusion of the judicial case.