ABSTRACT
Advanced ionic conductors are crucial for a large variety of contemporary technologies spanning solid state ion batteries, fuel cells, gas sensors, water desalination, etc. In this work, we report on a new member of KTiOPO4-structured materials, NaGaPO4F, with sodium-ion conductivity. NaGaPO4F has been obtained for the first time via a facile two-step synthesis consisting of a hydrothermal preparation of an ammonia-based precursor, NH4GaPO4F, followed by an ion exchange reaction with NaNO3. Its crystal structure was precisely refined using a combination of synchrotron X-ray powder diffraction and electron diffraction tomography. The material is thermally stable upon 450 °C showing no significant structural transformations or degradation but only a â¼1% cell volume expansion. Na-ion mobility in NaGaPO4F was investigated by a joint experimental and computational approach comprising solid-state nuclear magnetic resonance (NMR) and density functional theory (DFT). DFT and bond-valence site energy (BVSE) calculations reveal 3D diffusion of sodium in the [GaPO4F] framework with migration barriers amounting to 0.22 and 0.44 eV, respectively, while NMR yields 0.3-0.5 eV that, being coupled with a calculated bandgap of â¼4.25 eV, makes NaGaPO4F a promising fast Na-ion conductor.
ABSTRACT
The demand for fast-charging metal-ion batteries underlines the importance of anodes that work at high currents with no risk of dendrite formation. NiBTA, a one-dimensional Ni-based polymer derived from benzenetetramine (BTA), is a recently proposed promising material for safe fast-charging batteries. However, its charge-discharge mechanisms remained unclear and controversial. Here we solve the controversies by providing the first rigorous study using a combination of advanced theoretical and experimental techniques, including operando and ex situ X-ray diffraction, operando Raman spectroscopy and ex situ X-ray absorption near-edge spectroscopy (XANES). In safe potential ranges (0.5-2.0 V vs. M+/M, M = Li, Na or K), NiBTA offers high capacities, fast charge-discharge kinetics, high cycling stability and compatibility with various cations (Li+, Na+, K+). In the Na- and K-based cells, fast bulk faradaic processes are manifested for partially reduced states. Atomistic simulations explain the fast kinetics by facile rotations and displacements of the macromolecules in the crystal, opening channels for fast ion insertion. The material undergoes distinct crystal structure rearrangements in the Li-, Na- and K-based systems, which explains different electrochemical features. At the molecular level, the charge storage mechanism involves reversible two-electron reduction of the repeating units accompanied by a change of the absorption bandgap. The reversible reduction involves filling of the orbitals localized at the ligand moieties. No reduction of NiBTA beyond two electrons per repeating unit is observed at potentials down to 0 V vs. M+/M.
ABSTRACT
All-solid-state batteries primarily focus on macrocrystalline solid electrolyte/cathode interfaces, and little is explored on the growth and stability of nanograined Li-garnet and cathode ones. In this work, a thin (â¼500 nm) film of LiCoO2 (LCO) has been grown on top of the polycrystalline layer of Ta-doped Li7La3Zr2O12 (Ta-LLZO) solid electrolyte using the pulsed laser deposition (PLD) technique. Scanning transmission electron microscopy, electron diffraction, and electron tomography demonstrated that the LCO film is formed by columnar elements with the shape of inverted cones. The film appears to be highly textured, with the (003) LCO crystal planes parallel to the LCO/Ta-LLZO interface and with internal pores shaped by the {104} and {102} planes. According to density functional theory (DFT) calculations, this specific microstructure is governed by a competition between free energies of the corresponding crystal planes, which in turn depends on the oxygen and lithium chemical potentials during the deposition, indicating that thermodynamics plays an important role in the resulting LCO microstructure even under nonequilibrium PLD conditions. Based on the thermodynamic estimates, the experimental conditions within the LCO stability domain are proposed for the preferential {104} LCO orientation, which is considered favorable for enhanced Li diffusion in the positive electrode layers of all-solid-state batteries.
ABSTRACT
Polyanion compounds offer a playground for designing prospective electrode active materials for sodium-ion storage due to their structural diversity and chemical variety. Here, by combining a NaVPO4F composition and KTiOPO4-type framework via a low-temperature (e.g., 190 °C) ion-exchange synthesis approach, we develop a high-capacity and high-voltage positive electrode active material. When tested in a coin cell configuration in combination with a Na metal negative electrode and a NaPF6-based non-aqueous electrolyte solution, this cathode active material enables a discharge capacity of 136 mAh g-1 at 14.3 mA g-1 with an average cell discharge voltage of about 4.0 V. Furthermore, a specific discharge capacity of 123 mAh g-1 at 5.7 A g-1 is also reported for the same cell configuration. Through ex situ and operando structural characterizations, we also demonstrate that the reversible Na-ion storage at the positive electrode occurs mostly via a solid-solution de/insertion mechanism.
ABSTRACT
A broad range of cationic nonstoichiometry has been demonstrated for the Li-rich layered rock-salt-type oxide Li2MoO3, which has generally been considered as a phase with a well-defined chemical composition. Li2+xMo1-xO3 (-0.037 ≤ x ≤ 0.124) solid solutions were synthesized via hydrogen reduction of Li2MoO4 in the temperature range of 650-1100 °C, with x decreasing with the increase of the reduction temperature. The solid solutions adopt a monoclinically distorted O3-type layered average structure and demonstrate a robust local ordering of the Li cations and Mo3 triangular clusters within the mixed Li/Mo cationic layers. The local structure was scrutinized in detail by electron diffraction and aberration-corrected scanning transmission electron microcopy (STEM), resulting in an ordering model comprising a uniform distribution of the Mo3 clusters compatible with local electroneutrality and chemical composition. The geometry of the triangular clusters with their oxygen environment (Mo3O13 groups) has been directly visualized using differential phase contrast STEM imaging. The established local structure was used as input for density functional theory (DFT)-based calculations; they support the proposed atomic arrangement and provide a plausible explanation for the staircase galvanostatic charge profiles upon electrochemical Li+ extraction from Li2+xMo1-xO3 in Li cells. According to DFT, all electrochemical capacity in Li2+xMo1-xO3 solely originates from the cationic Mo redox process, which proceeds via oxidation of the Mo3 triangular clusters into bent Mo3 chains where the electronic capacity of the clusters depends on the initial chemical composition and Mo oxidation state defining the width of the first charge low-voltage plateau. Further oxidation at the high-voltage plateau proceeds through decomposition of the Mo3 chains into Mo2 dimers and further into individual Mo6+ cations.
ABSTRACT
Ti2Nb2O9 with a tunnel-type structure is considered as a perspective negative electrode material for Li-ion batteries (LIBs) with theoretical capacity of 252 mAh g-1 corresponding to one-electron reduction/oxidation of Ti and Nb, but only ≈160 mAh g-1 has been observed practically. In this work, highly reversible capacity of 200 mAh g-1 with the average (de)lithiation potential of 1.5 V vs Li/Li+ is achieved for Ti2Nb2O9 with pseudo-2D layered morphology obtained via thermal decomposition of the NH4TiNbO5 intermediate prepared by K+â H+â NH4+ cation exchange from KTiNbO5. Using operando synchrotron powder X-ray diffraction (SXPD), single-phase (de)lithiation mechanism with 4.8% unit cell volume change is observed. Operando X-ray absorption near-edge structure (XANES) experiment revealed simultaneous Ti4+/Ti3+ and Nb5+/Nb4+ reduction/oxidation within the whole voltage range. Li+ migration barriers for Ti2Nb2O9 along [010] direction derived from density functional theory (DFT) calculations are within the 0.15-0.4 eV range depending on the Li content that is reflected in excellent C-rate capacity retention. Ti2Nb2O9 synthesized via the ion-exchange route appears as a strong contender to widely commercialized Ti-based negative electrode material Li4Ti5O12 in the next generation of high-performance LIBs.
ABSTRACT
To realize high-power performance, lithium-ion batteries require stable, environmentally benign, and economically viable noncarbonaceous anode materials capable of operating at high rates with low strain during charge-discharge. In this paper, we report the synthesis, crystal structure, and electrochemical properties of a new titanium-based member of the MPO4 phosphate series adopting the α-CrPO4 structure type. α-TiPO4 has been obtained by thermal decomposition of a novel hydrothermally prepared fluoride phosphate, NH4TiPO4F, at 600 °C under a hydrogen atmosphere. The crystal structure of α-TiPO4 is refined from powder X-ray diffraction data using a Rietveld method and verified by electron diffraction and high-resolution scanning transmission electron microscopy, whereas the chemical composition is confirmed by IR, energy-dispersive X-ray, electron paramagnetic resonance, and electron energy loss spectroscopies. Carbon-coated α-TiPO4/C demonstrates reversible electrochemical activity ascribed to the Ti3+/Ti2+ redox transition delivering 125 mAh g-1 specific capacity at C/10 in the 1.0-3.1 V versus Li+/Li potential range with an average potential of â¼1.5 V, exhibiting good rate capability and stable cycling with volume variation not exceeding 0.5%. Below 0.8 V, the material undergoes a conversion reaction, further revealing capacitive reversible electrochemical behavior with an average specific capacity of 270 mAh g-1 at 1C in the 0.7-2.9 V versus Li+/Li potential range. This work suggests a new synthesis route to metastable titanium-containing phosphates holding prospective to be used as negative electrode materials for metal-ion batteries.
ABSTRACT
Lithium iron phosphate, LiFePO4, a widely used cathode material in commercial Li-ion batteries, unveils a complex defect structure, which is still being deciphered. Using a combined computational and experimental approach comprising density functional theory (DFT)+U and molecular dynamics calculations and X-ray and neutron diffraction, we provide a comprehensive characterization of various OH point defects in LiFePO4, including their formation, dynamics, and localization in the interstitial space and at Li, Fe, and P sites. It is demonstrated that one, two, and four (five) OH groups can effectively stabilize Li, Fe, and P vacancies, respectively. The presence of D (H) at both Li and P sites for hydrothermally synthesized deuterium-enriched LiFePO4 is confirmed by joint X-ray and neutron powder diffraction structure refinement at 5 K that also reveals a strong deficiency of P of 6%. The P occupancy decrease is explained by the formation of hydrogarnet-like P/4H and P/5H defects, which have the lowest formation energies among all considered OH defects. Molecular dynamics simulation shows a rich structural diversity of these defects, with OH groups pointing both inside and outside vacant P tetrahedra creating numerous energetically close conformers, which hinders their explicit localization with diffraction-based methods solely. The discovered conformers include structural water molecules, which are only by 0.04 eV/atom H higher in energy than separate OH defects.
ABSTRACT
A new monoclinic α-polymorph of the Na2FePO4F fluoride-phosphate has been directly synthesized via a hydrothermal method for application in metal-ion batteries. The crystal structure of the as-prepared α-Na2FePO4F studied with powder X-ray and neutron diffraction (P21/c, a = 13.6753(10) Å, b = 5.2503(2) Å, c = 13.7202(8) Å, ß = 120.230(4)°) demonstrates strong antisite disorder between the Na and Fe atoms. As revealed with DFT-based calculations, α-Na2FePO4F has low migration barriers for Na+ along the main pathway parallel to the b axis, and an additional diffusion bypass allowing the Na+ cations to go around the Na/Fe antisite defects. These results corroborate with the extremely high experimental Na-ion diffusion coefficient of (1-5)·10-11 cm2·s-1, which is 2 orders of magnitude higher than that for the orthorhombic ß-polymorph ((5-10)·10-13 cm2·s-1). Being tested as a cathode material in Na- and Li-ion battery cells, monoclinic α-Na2FePO4F exhibits a reversible specific capacity of 90 and 80 mAh g-1, respectively.
ABSTRACT
The rapid progress in mass-market applications of metal-ion batteries intensifies the development of economically feasible electrode materials based on earth-abundant elements. Here, we report on a record-breaking titanium-based positive electrode material, KTiPO4F, exhibiting a superior electrode potential of 3.6 V in a potassium-ion cell, which is extraordinarily high for titanium redox transitions. We hypothesize that such an unexpectedly major boost of the electrode potential benefits from the synergy of the cumulative inductive effect of two anions and charge/vacancy ordering. Carbon-coated electrode materials display no capacity fading when cycled at 5C rate for 100 cycles, which coupled with extremely low energy barriers for potassium-ion migration of 0.2 eV anticipates high-power applications. Our contribution shows that the titanium redox activity traditionally considered as "reducing" can be upshifted to near-4V electrode potentials thus providing a playground to design sustainable and cost-effective titanium-containing positive electrode materials with promising electrochemical characteristics.
ABSTRACT
Two new sodium nickel phosphates, Na5Ni2(PO4)3·H2O (I) and Na6Ni2(PO4)3OH (II), have been synthesized hydrothermally and characterized by synchrotron X-ray diffraction, electron diffraction, low-temperature thermodynamic and magnetic measurements, and ab initio calculations. Unlike the majority of Ni2+ compounds, I and II show predominant ferromagnetic exchange couplings. I crystallizes in the monoclinic space group P21/ n ( a = 14.0395(4) Å, b = 5.1847(14) Å, c = 16.4739(4) Å, ß = 110.4186(14)°) and features chains of ferromagnetically coupled Ni2+ ions. In II with the orthorhombic space group Pcmb ( a = 7.5007(15) Å, b = 21.4661(4) Å, c = 7.1732(15) Å), the ferromagnetically coupled Ni2+ ions form dimers arranged on a spin ladder. Both compounds represent rare examples of quasi-one-dimensional ferromagnets. Structural features behind this unusual magnetic behavior are discussed.
ABSTRACT
Using the orthorhombic layered Na2FePO4F cathode material as a model system we identify the bonding of the alkali metal cations to the semilabile oxygen atoms as an important factor affecting electrochemical activity of alkali cations in polyanion structures. The semilabile oxygens, bonded to the P and alkali cations, but not included into the FeO4F2 octahedra, experience severe undercoordination upon alkali cation deintercalation, causing an energy penalty for removing the alkali cations located in the proximity of such semilabile oxygens. Desodiation of Na2FePO4F proceeds through a two-phase mechanism in the Na-ion cell with a formation of an intermediate monoclinic Na1.55FePO4F phase with coupled Na/vacancy and Fe2+/Fe3+ charge ordering at 50% state of charge. In contrast, desodiation of Na2FePO4F in the Li-ion cell demonstrates a sloping charge profile suggesting a solid solution mechanism without formation of a charge-ordered intermediate phase. A combination of a comprehensive crystallographic study and extensive DFT-based calculations demonstrates that the difference in electrochemical behavior of the alkali cation positions is largely related to the different number of the nearest neighbor semilabile oxygen atoms, influencing their desodiation potential and accessibility for the Na/Li chemical exchange, triggering coupled alkali cation-vacancy ordering and Fe2+/Fe3+ charge ordering, as well as switching between the "solid solution" and "two-phase" charging mechanistic regimes.