Modified NiFe2O4-Supported Graphene Oxide for Effective Urea Electrochemical Oxidation and Water Splitting Applications.

The production of green hydrogen using water electrolysis is widely regarded as one of the most promising technologies. On the other hand, the oxygen evolution reaction (OER) is thermodynamically unfavorable and needs significant overpotential to proceed at a sufficient rate. Here, we outline important structural and chemical factors that affect how well a representative nickel ferrite-modified graphene oxide electrocatalyst performs in efficient water splitting applications. The activities of the modified pristine and graphene oxide-supported nickel ferrite were thoroughly characterized in terms of their structural, morphological, and electrochemical properties. This research shows that the NiFe2O4@GO electrode has an impact on both the urea oxidation reaction (UOR) and water splitting applications. NiFe2O4@GO was observed to have a current density of 26.6 mA cm-2 in 1.0 M urea and 1.0 M KOH at a scan rate of 20 mV s-1. The Tafel slope provided for UOR was 39 mV dec-1, whereas the GC/NiFe2O4@GO electrode reached a current of 10 mA cm-2 at potentials of +1.5 and -0.21 V (vs. RHE) for the OER and hydrogen evolution reaction (HER), respectively. Furthermore, charge transfer resistances were estimated for OER and HER as 133 and 347 Ω cm2, respectively.

Facile synthesis and eco-friendly analytical methods for concurrent estimation of selected pharmaceutical drugs in their solutions: application to quality by design, lean six sigma, and stability studies.

Economical, highly robust, selective, precise, and eco-friendly RP-UPLC and spectrophotometric methods were developed and validated for the concurrent estimation of selected pharmaceutical drugs represented in ceftazidime (CFZ) and pyridine (PYD) in their solutions using Agilent Zorbax SB-C18 RRHD (50 × 2.1 mm, 1.8 µm) column at flow rate 0.3 mL/min with wavelength 254 nm. Box-Behnken design (BBD) established Response surface methodology (RSM) to achieve the optimum chromatographic condition with minimal trials conducted. Three independent variables specifically acetonitrile ratio 60-70%, pH 3-7, and temperature 25-35 °C were implemented to evaluate the influences of these variables on the responses as resolution and retention time. Desirability and overlay plots were carried out to adjust the optimal condition that achieved the shortest retention time of less than 2 min and desired resolution of more than 1.5 using a mobile phase consisting of acetonitrile: purified water (70:30, v/v) at pH 5.0 adjusted by 0.1% orthophosphoric acid with the column oven temperature 30 °C and column void volume 0.46 mL. Mean centering of ratio spectra (MCR) and ratio subtraction (RS) methods were effectively applied to resolve drugs' spectral superposition at 220 nm, 255.4 nm, 260.3 nm, and 254.6 nm for CFZ and PYD, respectively. Linearity range was accomplished for UPLC, MCR, and RS methods over the concentration range of 2-100, 1-50,3-30 and 5-30 µg/mL for CFZ and PYD, respectively with correlation coefficient > 0.999 and good recovery results within 98-102%. Six Sigma methodology was achieved using the process capability index (Cpk) to compare the suggested and USP methods showing that both are highly capable with Cpk > 1.33. The proposed method was successfully validated depending on ICH guidelines and ANOVA results and applied for the accelerated stability study.

Chitosan Supports Boosting NiCo2O4 for Catalyzed Urea Electrochemical Removal Application.

Currently, wastewater containing high urea levels poses a significant risk to human health. Else, electrocatalytic methodologies have the potential to transform urea present in urea-rich wastewater into hydrogen, thereby contributing towards environmental conservation and facilitating the production of sustainable energy. The characterization of the NiCo2O4@chitosan catalyst was performed by various analytical techniques, including scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Furthermore, the activity of electrodes toward urea removal was investigated by several electrochemical techniques. As a function of current density, the performance of the modified NiCo2O4@chitosan surface was employed to remove urea using electrochemical oxidation. Consequently, the current density measurement was 43 mA cm-2 in a solution of 1.0 M urea and 1.0 M KOH. Different kinetic characteristics were investigated, including charge transfer coefficient (α), Tafel slope (29 mV dec-1), diffusion coefficient (1.87 × 10-5 cm2 s-1), and surface coverage 4.29 × 10-9 mol cm-2. The electrode showed high stability whereas it lost 10.4% of its initial current after 5 h of urea oxidation.

Physical and Thermal Characterizations of Newly Synthesized Liquid Crystals Based on Benzotrifluoride Moiety.

The mesomorphic stability and optical activity of new group-based benzotrifluoride liquid crystals, (E)-4-(((4-(trifluoromethyl) phenyl) imino) methyl) phenyl 4-(alkyloxy)benzoate, or In, were investigated. The end of the molecules connected to the benzotrifluoride moiety and the end of the phenylazo benzoate moiety have terminal alkoxy groups which can range in chain length from 6 to 12 carbons. The synthesized compounds' molecular structures were verified using FT-IR, 1H NMR, mass spectroscopy, and elemental analysis. Mesomorphic characteristics were verified using differential scanning calorimetry (DSC) and a polarized optical microscope (POM). All of the homologous series that have been developed display great thermal stability across a broad temperature range. Density functional theory (DFT) determined the examined compounds' geometrical and thermal properties. The findings showed that every compound is entirely planar. Additionally, by using the DFT approach, it was possible to link the experimentally found values of the investigated compounds' investigated compounds' mesophase thermal stability, mesophase temperature ranges, and mesophase type to the predicted quantum chemical parameters.

Zinc Nanocomposite Supported Chitosan for Nitrite Sensing and Hydrogen Evolution Applications.

Nanoparticles of ZnO-Chitosan (Zn-Chit) composite were prepared using precipitation methods. Several analytical techniques, such as scanning electron microscope (SEM), transmitted electron microscope (TEM), powder X-ray diffraction (XRD), infrared spectroscopy (IR), and thermal analysis, were used to characterize the prepared composite. The activity of the modified composite was investigated for nitrite sensing and hydrogen production applications using various electrochemical techniques. A comparative study was performed for pristine ZnO and ZnO loaded on chitosan. The modified Zn-Chit has a linear range of detection 1-150 µM and a limit of detection (LOD) = 0.402 µM (response time ~3 s). The activity of the modified electrode was investigated in a real sample (milk). Furthermore, the anti-interference capability of the surface was utilized in the presence of several inorganic salts and organic additives. Additionally, Zn-Chit composite was employed as an efficient catalyst for hydrogen production in an acidic medium. Thus, the electrode showed long-term stability toward fuel production and enhanced energy security. The electrode reached a current density of 50 mA cm-2 at an overpotential equal to -0.31 and -0.2 V (vs. RHE) for GC/ZnO and GC/Zn-Chit, respectively. Electrode durability was studied for long-time constant potential chronoamperometry for 5 h. The electrodes lost 8% and 9% of the initial current for GC/ZnO and GC/Zn-Chit, respectively.

Polyaniline-Supported Nickel Oxide Flower for Efficient Nitrite Electrochemical Detection in Water.

A modified electrode with conducting polymer (Polyaniline) and NiO nanoflowers was prepared to detect nitrite ions in drinking water. A simple method was used to prepare the NiO nanoflower (NiOnF). Several techniques characterized the as-prepared NiOnF to determine the chemical structure and surface morphology of the NiO, such as XRD, XPS, FT-IR, and TGA. The activity of the electrode toward nitrite sensing was investigated over a wide range of pH (i.e., 2 to 10). The amperometry method was used to determine the linear detection range and limit. Accordingly, the modified electrode GC/PANI/NiOnf showed a linear range of detection at 0.1-1 µM and 1-500 µM. At the same time, the limit of detection (LOD) was 9.7 and 64 nM for low and high concentrations, respectively. Furthermore, the kinetic characteristics of nitrite, such as diffusion and transport coefficients, were investigated in various media. Moreover, the charge transfer resistance was utilized for nitrite electrooxidation in different pH values by the electrochemical impedance technique (EIS). The anti-interfering criteria of the modified surfaces were utilized in the existence of many interfering cations in water (e.g., K+, Na+, Cu2+, Zn2+, Ba2+, Ca2+, Cr2+, Cd2+, Pd2+). A real sample of the Nile River was spiked with nitrite to study the activity of the electrode in a real case sample (response time ~4 s). The interaction between nitrite ions and NiO{100} surface was studied using DFT calculations as a function of adsorption energy.

Mesomorphic, Computational Investigations and Dyeing Applications of Laterally Substituted Dyes.

Two groups of laterally substituted non-mesomorphic and liquid crystalline materials bearing monoazo group were prepared and investigated via experimental and theoretical techniques. The molecular structures of the designed dyes were evaluated by FT-IR and NMR spectroscopic analyses. Mesomorphic examinations for all synthesized dyes were investigated by polarized optical microscopy (POM) and differential scanning calorimetry (DSC). Results revealed that, the thermal and optical properties of investigated compounds are mainly dependent on their molecular geometry. The optimized geometries of the azo derivatives and their electronic absorption of the dyes were carried out using the B3LYP/6-311G level of the DFT method. The azo dyes were measured for their dyeing performance on polyester fabrics. The dyed fabrics have excellent fastness properties with a color strength of 1.49-3.43 and an exhaustion rate of 82-64%. The chemical descriptor parameters of disperse azo dyes in gas phase were calculated and correlated with dyeing parameters.

Novel Imidazole Liquid Crystals; Experimental and Computational Approaches.

The liquid crystalline materials named (E)-4-(2-(4-oxo-5,5-diphenyl-4,5-dihydro-1H-imidazol-2-yl)hydrazineylidene)methyl)phenyl and 4-(alkoxy)benzoate, In, were synthesized and their mesomorphic behaviors were examined. The chemical structures of the produced compounds were confirmed by Fourier-transform infrared spectroscopy (FT-IR), NMR, and elemental analysis. Differential scanning calorimetry (DSC) and polarized optical microscopy were used to investigate the mesomorphic properties of designed heterocyclic derivatives. All the compounds tested had suitable thermal stability and enantiotropic behavior of smectogenic temperature ranges. Furthermore, the enantiotropic smectic C phases were observed to cover all the homologues. Moreover, computational investigations corroborated the experimental findings of the mesomorphic behavior. The reactivity parameters were computed for the derivatives and linked with the experimental data. Theoretical calculations revealed that the polarizability of the studied series increases with the chain length, whereas the HOMO-LUMO energy gap or other reactivity descriptors were less sensitive to the size of the system. On the other hand, the predicted thermodynamic parameters revealed the size dependence of thermal stability of the compounds.

Wide Nematogenic Azomethine/Ester Liquid Crystals Based on New Biphenyl Derivatives: Mesomorphic and Computational Studies.

The thermal stability and mesomorphic behavior of a new biphenyl azomethine liquid crystal homologues series, (E)-4-(([1,1'-biphenyl]-4-ylmethylene)amino)phenyl 4-(alkoxy)benzoate, In, were investigated. The chemical structures of the synthesized compounds were characterized using FT-IR, NMR, and elemental analyses. Differential scanning calorimetry (DSC) and polarized optical microscopy were employed to evaluate the mesomorphic characteristics of the designed homologues. The examined homologues possessed high thermal stability and broad nematogenic temperature ranges. Furthermore, the homologues were covered by enantiotropic nematic phases. The experimental measurements of the mesomorphic behavior were substantiated by computational studies using the density functional theory (DFT) approach. The reactivity parameters, dipole moments, and polarizability of the studied molecules are discussed. The theoretical calculations demonstrated that as the chain length increased, the polarizability of the studied series increased; while it did not significantly affect the HOMO-LUMO energy gap and other reactivity descriptors, the biphenyl moiety had an essential impact on the stability of the possible geometries and their thermal as well as physical parameters.

Experimental and Theoretical Investigations of Three-Ring Ester/Azomethine Materials.

New three-ring ester/azomethine homologues series, (E)-4-((4-hydroxybenzylidene)amino)phenyl 4-(alkoxy)benzoate In, were prepared and their properties were investigated experimentally and theoretically. FT-IR, NMR, and elemental analyses were used to confirm the chemical structures of the synthesized compounds. The mesomorphic activities of the planned homologues were evaluated using differential scanning calorimetry (DSC) and polarized optical microscopy. All of the homologous examined were found to have non-mesomorphic properties. Theoretical calculations using the density functional theory (DFT) were used to validate the experimental data and determine the most stable conformation of the synthesized compounds. All calculated conformers' thermal properties, dipole moments, and polarizability were discussed. The results show that the terminal alkoxy chain length affects the thermal parameters of the conformers. The correlations between these parameters' values and the conformer type were demonstrated. The base component was expected to be in two conformers according to the orientation of the N atom of imine-linkage. DFT calculations revealed the more probable of the two possible conformers, and the incorporation of the alkoxy terminal chain in one position affect its geometrical and mesomerphic characteristics.

Antibacterial potency, cell viability and morphological implications of copper oxide nanoparticles encapsulated into cellulose acetate nanofibrous scaffolds.

It is generally believed that the most challenging impediment for the utilization of cellulose acetate (CA) in the medical field is its hydrophobicity and disability to poison the harmful microbes. Therefore, in this contribution, we aimed to prepare an environmentally scaffold-based CA loaded with copper nanoparticles (CuONPs), which are expected to not only improve the hydrophilicity of the prepared nanofibers, but also have an effective ability to kill such harmful and infectious microbes that are abundant in wounds. The obtained results attested that the generated nanofibers became thicker with increasing the content of CuONPs in CA nanofibers. The roughness average increased from 143.2 to 157.1 nm, whereas the maximum height of the roughness (Rt) increased from 400.8 to 479.9 nm as going from the lowest to the highest content of CuONPs. Additionally, the contact angle of the prepared nanofibers decreased from 105.3° (CA alone) to 85.4° for CuONPs@CA. Significantly, biological studies revealed that cell viability and anti-bacterial potency were improved upon incorporating CuONPs into CA solution. Correspondingly, their inhibition zones reached 18 ± 3 mm, and 16 ± 2 mm for nanofibrous scaffolds having 12.0CuO@CA, besides raising the cell viability from 91.3 ± 4% to 96.4 ± 4% for 0.0CuO@CA, and 12.0CuO@CA, respectively, thereby implying that the fabricated CuONPs@CA nanocomposite has biocompatibility towards fibroblast cells. Thus, introducing biological activity into CA nanofibers via loading with CuONPs makes it suitable for numerous biomedical applications, particularly as an environmentally benign wound dressing fibers.

Removal of Fluorescein Dye from Aqueous Solutions Using Natural and Chemically Treated Pine Sawdust.

The various factors affecting the removal of fluorescein dye using sawdust from aqueous solutions such as time, initial concentration, pH, and temperature were studied. The optimal conditions for removing the FD are 1 g of sawdust at pH 3 and 120 min time of contact. Dye removal dropped from 93.42% to 80.04% with natural pine sawdust (NPS) and from 96.83% to 81.51% with synthetic pine sawdust (SPS) by increasing their concentration from 2 to 10 mg/L. Isotherm, kinetic, and thermodynamic models were applied for determining their constants. The results indicated that the FD removal equilibrium was effectively defined by the Langmuir, Freundlich, and Temkin models. Kinetic studies showed that the pseudo-second order was well suited for dye removal, and the internal diffusion process was by two steps. The thermodynamic parameter values suggested that FD removal were physical adsorption, exothermic, lower randomness, and spontaneous.

Studies on Adsorption of Fluorescein Dye from Aqueous Solutions Using Wild Herbs.

The adsorption of fluorescein dye (FD) on wild herb microparticles (Juniperus (JH) and Solenostemma argel (Del) Hayne (SH)) was studied to elucidate the changes in adsorption behavior with various parameters, such as initial concentration, adsorbent dosage, pH, contact time, and temperature. It was determined that the adsorption percentage of JH for FD was as high as 85.5%, which was higher than that of SH (71.9%). The morphologies of JH and SH were analyzed using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses. The JH and SH adsorbents contained different functional groups, which were involved in the binding of the FD molecules during adsorption. The XRD patterns of JH and SH confirmed the presence of a combination of amorphous and crystalline phases in their structures. The SEM images of the surface of JH revealed the presence of deep pores ranging in size from 1.9 to 3.5 µm, while SH contained smaller pores ranging in size from 130 to 350 µm, which could help absorb large quantities of FD. The Freundlich model fitted the adsorption isotherms better than the Langmuir model. The values of the Freundlich equilibrium coefficient and separation factor ranged from 1 to 2 and from 0 to 1, respectively. The maximum adsorption capacities of JH and SH were determined to be 2.91 and 2.565 mg/g, respectively. Four kinetic models were used to analyze the experimental data, and it was determined that the pseudo-second-order kinetic model best described the adsorption process, which involved chemical adsorption and the internal diffusion. Thermodynamic parameters, including the enthalpy, entropy, and Gibbs free energy, were calculated. These parameters indicated that the adsorption of FD on JH was spontaneous and endothermic and the adsorption of FD on SH was unspontaneous and exothermic.