ABSTRACT
Propranolol (PROP) undergoes extensive first-pass metabolism by the liver resulting in a relatively low bioavailability (13-23%); thus, multiple oral doses are required to achieve therapeutic effect. Since some studies have reported that glucosamine (GlcN) can increase the bioavailability of some drugs, therefore, it is aimed to study whether GlcN can change the pharmacokinetic parameters of PROP, thus modulating its bioavailability. When PROP was orally co-administered with GlcN (200mg/kg) to rats, PROP area under curve (AUC) and maximum concentration (Cmax) were significantly decreased by 43% (p<0.01) and 33% (p<0.05), respectively. In line with the in vivo results, in silico simulations confirmed that GlcN decreased rat intestinal effective permeability (Peff) and increased PROP clearance by 50%. However, in situ single pass intestinal perfusion (SPIP) experiments showed that GlcN significantly increased PROP serum levels (p<0.05). Furthermore, GlcN decreased PROP disposition/distribution into cultured hepatocytes in concentration dependent manner. Such change in the interaction pattern between GlcN and PROP might be attributed to the environment of the physiological buffer used in the in vitro experiments (pH7.2) versus the oral administration and thus, enhanced PROP permeability. Nevertheless, such enhancement was not detected when everted gut sacks were incubated with both drugs at the same pH in vitro. In conclusion, GlcN decreased PROP serum levels in rats in a dose-dependent manner. Such interaction might be attributed to decreased intestinal permeability and enhanced clearance of PROP in the presence of GlcN. Further investigations are still warranted to explain the in vitro inhibitory action of GlcN on PROP hepatocytes disposition and the involvement of GlcN in the intestinal and hepatic metabolizing enzymes of PROP at different experimental conditions.
Subject(s)
Adrenergic beta-Antagonists/pharmacokinetics , Glucosamine/pharmacology , Intestinal Absorption/drug effects , Propranolol/pharmacokinetics , Administration, Oral , Adrenergic beta-Antagonists/blood , Animals , Biological Availability , Female , Hepatocytes/metabolism , Intestinal Mucosa/metabolism , Male , Propranolol/blood , Rats, Sprague-DawleyABSTRACT
An increasing interest has recently been shown to use chitin/chitosan oligomers (chito-oligomers) in medicine and food fields because they are not only water-soluble, nontoxic, and biocompatible materials, but they also exhibit numerous biological properties, including antibacterial, antifungal, and antitumor activities, as well as immuno-enhancing effects on animals. Conventional depolymerization methods of chitosan to chito-oligomers are either chemical by acid-hydrolysis under harsh conditions or by enzymatic degradation. In this work, hydrolysis of chitosan to chito-oligomers has been achieved by applying adsorption-separation technique using diluted HCl in the presence of different types of zeolite as adsorbents. The chito-oligomers were retrieved from adsorbents and characterized by differential scanning calorimetry (DSC), liquid chromatography/mass spectroscopy (LC/MS), and ninhydrin test.
Subject(s)
Chitin/chemistry , Chitosan/chemistry , Zeolites/chemistry , Anti-Bacterial Agents/chemistry , Antifungal Agents/chemistry , Antineoplastic Agents/chemistry , Biocompatible Materials/chemistry , Calorimetry, Differential Scanning , Chromatography, Liquid , Hydrochloric Acid/chemistry , Hydrolysis , Indicators and Reagents/chemistry , Mass Spectrometry , Ninhydrin/chemistryABSTRACT
The aim of the work reported herein was to study the effect of glucosamine HCl (GlcN·HCl) on the bioactivity (BA) of insulin, administered via subcutaneous (SC) and oral routes, in adult male Sprague Dawley rats. The oral insulin delivery system (insulin-chitosan reverse micelle [IC-RM]) was prepared by solubilizing insulin-chitosan (13 kDa) polyelectrolyte complex in a RM system consisting of oleic acid, PEG-8 caprylic/capric glycerides, and polyglycerol-6-dioleate. The BA of insulin in vivo was evaluated by measuring blood glucose level using a blood glucose meter; the results revealed that the extent of hypoglycemic activity of SC insulin was GlcN·HCl dose dependent when they were administered simultaneously. A significant reduction in blood glucose levels (P<0.05) was found for the insulin:GlcN·HCl at mass ratios of 1:10 and 1:20, whereas lower ratios (eg, 1:1 and 1:4) showed no significant reduction. Furthermore, enhancement of the action of SC insulin was achieved by oral administration of GlcN·HCl for 5 consecutive days prior to insulin injection (P<0.05). For oral insulin administration via the IC-RM system, the presence of GlcN·HCl increased the hypoglycemic activity of insulin (P<0.05). The relative BA were 6.7% and 5.4% in the presence and absence of GlcN·HCl (ie, the increase in the relative BA was approximately 23% due to incorporating GlcN·HCl in the IC-RM system), respectively. The aforementioned findings offer an opportunity to incorporate GlcN·HCl in oral insulin delivery systems in order to enhance a reduction in blood glucose levels.
Subject(s)
Blood Glucose/drug effects , Chitosan/chemistry , Diabetes Mellitus, Experimental/drug therapy , Drug Carriers , Glucosamine/administration & dosage , Hypoglycemic Agents/administration & dosage , Insulin/administration & dosage , Nanoparticles , Administration, Oral , Animals , Biomarkers/blood , Chemistry, Pharmaceutical , Diabetes Mellitus, Experimental/blood , Drug Administration Schedule , Glucosamine/chemistry , Hypoglycemic Agents/chemistry , Injections, Subcutaneous , Insulin/chemistry , Male , Micelles , Rats, Sprague-Dawley , Time FactorsABSTRACT
A comprehensive profile of prasugrel HCl is reported herein with 158 references. A full description including nomenclature, formulae, elemental analysis, and appearance is included. Methods of preparation for prasugrel HCl, its intermediates, and derivatives are fully discussed. In addition, the physical properties, analytical methods, stability, uses and applications, and pharmacology of prasugrel HCl are also discussed.
Subject(s)
Piperazines/chemistry , Platelet Aggregation Inhibitors/chemistry , Purinergic P2Y Receptor Antagonists/chemistry , Thiophenes/chemistry , Animals , Chemistry, Pharmaceutical , Drug Stability , Humans , Molecular Structure , Piperazines/pharmacokinetics , Piperazines/pharmacology , Platelet Aggregation Inhibitors/pharmacokinetics , Platelet Aggregation Inhibitors/pharmacology , Prasugrel Hydrochloride , Purinergic P2Y Receptor Antagonists/pharmacokinetics , Purinergic P2Y Receptor Antagonists/pharmacology , Technology, Pharmaceutical/methods , Thiophenes/pharmacokinetics , Thiophenes/pharmacologyABSTRACT
The aim of the work reported herein was to investigate the effect of various low molecular weight chitosans (LMWCs) on the stability of insulin using USP HPLC methods. Insulin was found to be stable in a polyelectrolyte complex (PEC) consisting of insulin and LMWC in the presence of a Tris-buffer at pH 6.5. In the presence of LMWC, the stability of insulin increased with decreasing molecular weight of LMWC; 13 kDa LMWC was the most efficient molecular weight for enhancing the physical and chemical stability of insulin. Solubilization of insulin-LMWC polyelectrolyte complex (I-LMWC PEC) in a reverse micelle (RM) system, administered to diabetic rats, results in an oral delivery system for insulin with acceptable bioactivity.
Subject(s)
Chitin/analogs & derivatives , Diabetes Mellitus, Experimental/drug therapy , Drug Delivery Systems , Electrolytes/chemistry , Excipients/chemistry , Hypoglycemic Agents/administration & dosage , Insulin/administration & dosage , Administration, Oral , Animals , Biological Availability , Biotransformation , Chitin/chemistry , Chitosan , Diabetes Mellitus, Experimental/blood , Diabetes Mellitus, Experimental/metabolism , Drug Liberation , Drug Stability , Drug Storage , Hyperglycemia/prevention & control , Hypoglycemic Agents/blood , Hypoglycemic Agents/pharmacokinetics , Hypoglycemic Agents/therapeutic use , Insulin/analogs & derivatives , Insulin/analysis , Insulin/blood , Insulin/pharmacokinetics , Insulin/therapeutic use , Male , Micelles , Molecular Weight , Oligosaccharides , Particle Size , Random Allocation , Rats, Sprague-DawleyABSTRACT
This study describes the preparation, characterization and performance of a novel excipient for use in oro-dispersible tablets (ODT). The excipient (Cop-CM) consists of chitin and mannitol. The excipient with optimal physicochemical properties was obtained at a chitin: mannitol ratio of 2:8 (w/w) and produced by roll compaction (RC). Differential scanning calorimetry (DSC), Fourier transform-Infrared (FT-IR), X-ray powder diffraction (XRPD) and scanning electron microscope (SEM) techniques were used to characterize Cop-CM, in addition to characterization of its powder and ODT dosage form. The effect of particle size distribution of Cop-CM was investigated and found to have no significant influence on the overall tablet physical properties. The compressibility parameter (a) for Cop-CM was calculated from a Kawakita plot and found to be higher (0.661) than that of mannitol (0.576) due to the presence of the highly compressible chitin (0.818). Montelukast sodium and domperidone ODTs produced, using Cop-CM, displayed excellent physicochemical properties. The exceptional binding, fast wetting and superdisintegration properties of Cop-CM, in comparison with commercially available co-processed ODT excipients, results in a unique multifunctional base which can successfully be used in the formulation of oro-dispersible and fast immediate release tablets.
Subject(s)
Anti-Asthmatic Agents/administration & dosage , Antiemetics/administration & dosage , Chitin/chemistry , Drug Delivery Systems , Excipients/chemistry , Mannitol/chemistry , Acetates/administration & dosage , Acetates/chemistry , Administration, Oral , Anti-Asthmatic Agents/chemistry , Antiemetics/chemistry , Calorimetry, Differential Scanning , Chemical Phenomena , Chitin/ultrastructure , Cyclopropanes , Domperidone/administration & dosage , Domperidone/chemistry , Drug Compounding , Drug Liberation , Humans , Microscopy, Electron, Scanning , Particle Size , Powder Diffraction , Quinolines/administration & dosage , Quinolines/chemistry , Spectroscopy, Fourier Transform Infrared , Sulfides , Tablets , Water/analysisABSTRACT
The objective of the present study was to prepare and characterize low molecular weight chitosan (LMWC) with different molecular weight and degrees of deacetylation (DDA) and to optimize their use in oral insulin nano delivery systems. Water in oil nanosized systems containing LMWC-insulin polyelectrolyte complexes were constructed and their ability to reduce blood glucose was assessed in vivo on diabetic rats. Upon acid depolymerization and testing by viscosity method, three molecular weights of LMWC namely, 1.3, 13 and 18 kDa were obtained. As for the DDA, three LMWCs of 55%, 80% and 100% DDA were prepared and characterized by spectroscopic methods for each molecular weight. The obtained LMWCs showed different morphological and in silico patterns. Following complexation of LMWCs with insulin, different aggregation sizes were obtained. Moreover, the in vivo tested formulations showed different activities of blood glucose reduction. The highest glucose reduction was achieved with 1.3 kDa LMWC of 55% DDA. The current study emphasizes the importance of optimizing the molecular weight along with the DDA of the incorporated LMWC in oral insulin delivery preparations in order to ensure the highest performance of such delivery systems.
Subject(s)
Chitosan/chemistry , Diabetes Mellitus, Experimental/drug therapy , Drug Delivery Systems , Hypoglycemic Agents/administration & dosage , Insulin, Regular, Human/administration & dosage , Nanoparticles/chemistry , Acetylation , Administration, Oral , Animals , Blood Glucose/analysis , Diabetes Mellitus, Experimental/blood , Drug Compounding , Electrolytes/chemistry , Humans , Hyperglycemia/prevention & control , Hypoglycemic Agents/therapeutic use , Insulin, Regular, Human/therapeutic use , Male , Molecular Weight , Nanoparticles/ultrastructure , Particle Size , Random Allocation , Rats, Sprague-Dawley , Recombinant Proteins/administration & dosage , Recombinant Proteins/therapeutic use , Surface Properties , ViscosityABSTRACT
The effect of reduced (GSH) and oxidized (GSSG) glutathione on the bioactivity of insulin was studied. A polyelectrolyte complex (PEC) of insulin with low molecular weight chitosan (13 kDa) was prepared and characterized. The PEC was then solubilized, in the presence and absence of GSH and GSSG, in a reverse micelle consisting of oleic acid and two surfactants (PEG-8 caprylic/capric glycerides and polyglycerol-6-dioleate). The in vitro and in vivo performances of the reverse micelle formulations (RMFs) were evaluated in rats. At pH 6.5 the association efficiency of the PEC was 76.2%. In vitro insulin release from the RMs was negligible at pH 1.2 and was markedly increased at pH 6.8. The hypoglycemic activity of insulin in the PEC was reduced when administered via the subcutaneous route, regardless of the GSH content. On the other hand, the presence of GSSG significantly enhanced hypoglycemia. When the RMF was administered via the oral route, the presence of GSH had no effect on the hypoglycemic activity of insulin compared with the GSH free system. However, the presence of GSSG in the oral preparation increased the hypoglycemic activity of insulin; probably by inhibiting insulin degradation, thereby prolonging its effect. Thus, incorporation of GSSG in the RMF reduces blood glucose levels in rats and protects insulin from degradation.
Subject(s)
Blood Glucose/drug effects , Glutathione/pharmacology , Hypoglycemic Agents/administration & dosage , Insulin/administration & dosage , Administration, Oral , Animals , Chitosan , Drug Carriers , Drug Interactions , Glutathione/chemistry , Hypoglycemic Agents/chemistry , Hypoglycemic Agents/pharmacology , Injections, Subcutaneous , Insulin/chemistry , Insulin/pharmacology , Male , Micelles , Nanoparticles , Particle Size , Rats , Rats, Sprague-DawleyABSTRACT
A comprehensive profile of moxifloxacin HCl with 198 references is reported. A full description including nomenclature, formulae, elemental analysis, and appearance is included. Methods of preparation for moxifloxacin HCl, its intermediates, and derivatives are fully described. In addition, the physical properties, analytical methods, stability, uses and applications, and pharmacology of moxifloxacin HCl are also discussed.
Subject(s)
Anti-Bacterial Agents/analysis , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/chemical synthesis , Fluoroquinolones/analysis , Fluoroquinolones/chemistry , Fluoroquinolones/chemical synthesis , Animals , Anti-Bacterial Agents/pharmacology , Chemistry, Pharmaceutical , Drug Stability , Fluoroquinolones/pharmacology , Humans , Molecular Structure , Moxifloxacin , Tissue DistributionABSTRACT
A co-processed excipient was prepared from commercially available crystalline mannitol and α-chitin using direct compression as well as spray, wet, and dry granulation. The effect of the ratio of the two components, percentage of lubricant and particle size, on the properties of the prepared co-processed excipient has been investigated. α-Chitin forms non-hygroscopic, highly compactable, disintegrable compacts when co-processed with crystalline mannitol. The compaction properties of the co-processed mannitol-chitin mixture were found to be dependent upon the quantity of mannitol added to chitin, in addition to the granulation procedure used. Optimal physicochemical properties of the excipient, from a manufacturing perspective, were obtained using a co-processed mannitol-chitin (2:8, w/w) mixture prepared by wet granulation (Cop-MC). Disintegration time, crushing strength, and friability of tablets, produced from Cop-MC using magnesium stearate as a lubricant, were found to be independent of the particle size of the prepared granules. The inherent binding and disintegration properties of the compressed Cop-MC are useful for the formulation of poorly compressible, high-strength, and low-strength active pharmaceutical ingredients. The ability to co-process α-chitin with crystalline mannitol allows chitin to be used as a valuable industrial pharmaceutical excipient.