Glanzmann Thrombasthenia Associated with Siderotic Synovitis and Arthropathy: A Case Report.

Glanzmann thrombasthenia is a bleeding disorder with a low incidence. It typically manifests as superficial bleeding episodes, which tend to be mild. Deep organ involvement is not uncommon but remains rare due to the rarity of the disease itself and the unusual association between platelet disorders and deep organ implications. A 17-year-old boy with Glanzmann thrombasthenia since infancy developed ankle pain after a minor trauma. His initial workup was negative, but he continued to experience ankle pain. A magnetic resonance imaging (MRI) done after four weeks suggested siderotic synovitis. The patient was lost to follow-up after that and returned after two years with recurrent left ankle pain. Imaging and studies have shown evidence of chronic arthropathy. A specialized orthopedic team assessed the patient. The patient underwent intra-articular steroid injection for pain relief and was referred to continue physical therapy. In conclusion, hemarthrosis is more common in hemophilia than in platelet disorders and has potential morbidity and quality-of-life implications.

Intramedullary Osteosclerosis of the Tibia: A Rare Cause of Osteosclerosis to Keep an Eye On.

Intramedullary osteosclerosis (IMOS) is a rare process of intramedullary bone formation in one or more bones in the lower limb. It arises in adulthood, its etiology is unknown, and it is diagnosed by exclusion. We present a case of a 26-year-old female who presented with three-week history of right tibial pain provoked by prolonged standing. Imaging revealed sclerotic cortical thickening, in addition to sclerosis at the mid-tibial segment. Intramedullary osteosclerosis is an uncommon cause of leg pain. The literature revealed that non-steroidal anti-inflammatory drugs (NSAIDs) might be of use to help ease the pain.

Rosai-Dorfman Disease of the Spine: A Case Report of a Rare Disease and Review of the Literature.

Rosai-Dorfman disease (also known as sinus histiocytosis with massive lymphadenopathy or Rosai-Dorfman-Destombes disease) is a rare reactive histiocytic disease, classically involving the lymph nodes of the neck, but it can also occur in extranodal sites. Isolated spinal involvement is rare but important to identify as it can mimic malignancy with males being affected more than females. We present a case of a 52-year-old female patient who had breast cancer and was admitted with long-standing anal and sacral pain. The MRI lumbar spine showed a mass concerning for metastasis. CT-guided biopsy results showed sheets of histiocyte-like cells, some of which were positive with S100 and showed emperipolesis along with plasma cells, lymphocytes, and neutrophils. Features were in keeping with Rosai-Dorfman syndrome. The patient responded to steroids. The familiarity with this entity saved the patient from going through the agony of this being considered a metastasis of her primary malignancy.

Gastrobronchial Fistula: A Rare Complication of Postlaparascopic Sleeve Gastrectomy-A Case Report and Literature Review.

INTRODUCTION: Obesity is one of the leading causes of morbidity and mortality in countries all over the world, and its prevalence has been increasing dramatically in recent years. Bariatric surgery is considered the gold standard of care for patients who failed conservative management. Laparoscopic sleeve gastrectomy (LSG) is of increasing popularity. One of its vicious consequences is the development of acquired fistula between the stomach and the tracheobronchial tract due to intractable gastric leak. Case Report. We are presenting a case of a 25-year-old man who underwent laparoscopic sleeve gastrectomy for morbid obesity, which was complicated with the development of gastrobronchial fistula, despite an unremarkable postoperative course. CONCLUSION: Acquired gastrobronchial fistula due to bariatric surgery is not reported widely in radiologic literature; hence, there is lack of consensus of the diagnostic modality of choice. However, there is a myriad of tests available for diagnosing gastrobronchial fistula, with contrast study of the upper gastrointestinal tract which is the widely accepted diagnostic test.

Exhaled SARS-CoV-2 quantified by face-mask sampling in hospitalised patients with COVID-19.

BACKGROUND: Human to human transmission of SARS-CoV-2 is driven by the respiratory route but little is known about the pattern and quantity of virus output from exhaled breath. We have previously shown that face-mask sampling (FMS) can detect exhaled tubercle bacilli and have adapted its use to quantify exhaled SARS-CoV-2 RNA in patients admitted to hospital with Coronavirus Disease-2019 (COVID-19). METHODS: Between May and December 2020, we took two concomitant FMS and nasopharyngeal samples (NPS) over two days, starting within 24 h of a routine virus positive NPS in patients hospitalised with COVID-19, at University Hospitals of Leicester NHS Trust, UK. Participants were asked to wear a modified duckbilled facemask for 30 min, followed by a nasopharyngeal swab. Demographic, clinical, and radiological data, as well as International Severe Acute Respiratory and emerging Infections Consortium (ISARIC) mortality and deterioration scores were obtained. Exposed masks were processed by removal, dissolution and analysis of sampling matrix strips fixed within the mask by RT-qPCR. Viral genome copy numbers were determined and results classified as Negative; Low: ≤999 copies; Medium: 1000-99,999 copies and High ≥ 100,000 copies per strip for FMS or per 100 µl for NPS. RESULTS: 102 FMS and NPS were collected from 66 routinely positive patients; median age: 61 (IQR 49 - 77), of which FMS was positive in 38% of individuals and concomitant NPS was positive in 50%. Positive FMS viral loads varied over five orders of magnitude (<10-3.3 x 106 genome copies/strip); 21 (32%) patients were asymptomatic at the time of sampling. High FMS viral load was associated with respiratory symptoms at time of sampling and shorter interval between sampling and symptom onset (FMS High: median (IQR) 2 days (2-3) vs FMS Negative: 7 days (7-10), p = 0.002). On multivariable linear regression analysis, higher FMS viral loads were associated with higher ISARIC mortality (Medium FMS vs Negative FMS gave an adjusted coefficient of 15.7, 95% CI 3.7-27.7, p = 0.01) and deterioration scores (High FMS vs Negative FMS gave an adjusted coefficient of 37.6, 95% CI 14.0 to 61.3, p = 0.002), while NPS viral loads showed no significant association. CONCLUSION: We demonstrate a simple and effective method for detecting and quantifying exhaled SARS-CoV-2 in hospitalised patients with COVID-19. Higher FMS viral loads were more likely to be associated with developing severe disease compared to NPS viral loads. Similar to NPS, FMS viral load was highest in early disease and in those with active respiratory symptoms, highlighting the potential role of FMS in understanding infectivity.

Comprehensive Assessment of Ultrasound's Role in Carpal Tunnel Syndrome in Reference to Electromyography.

Carpal tunnel syndrome (CTS) is the most common peripheral mononeuropathy related to entrapment syndrome. An increase in the median nerve cross-sectional area (CSA) is visualized using ultrasound (US) imaging for CTS patients. This study aims to correlate, for the first time in the state of Qatar, the findings of US imaging and electromyography (EMG) in patients with CTS for diagnostic and classification purposes. First, US CSA was numerically obtained from patients' records. Second, EMG findings were gathered as normal, mild, moderate, and severe CTS. After that, we performed a different statistical approach than those used in the literature, using one-way analysis of variance (ANOVA) and post hoc tests for the final analysis. In summary, we found that the US seems unable to differentiate some normal from mild CTS cases; however, it appears to be excellent at differentiating moderate from severe CTS cases.

3-D printed polyvinyl alcohol matrix for detection of airborne pathogens in respiratory bacterial infections.

Novel sampling matrices were manufactured using 3D printing for the detection of respiratory pathogens in expired air. A specific configuration of the matrices was designed using Computer-Aided Design software. Polyvinyl alcohol (PVA) was printed using fused deposition modelling to create a multilayer matrix to enhance the capture of bacteria. The performance of these matrices was compared with gelatine filters that have been used for this work to date. PVA matrices (60 mm diameter) were contaminated with bacteria either by direct inoculation, or by aerosol exposure using an Omron A3 nebuliser. Rough and smooth morphotypes of Mycobacterium abscessus, M. smegmatis and M. bovis BCG, were used in this study to contaminate the matrices. PVA matrices and gelatine sampling filters were contaminated to compare recovery rates for quantitative analyses. These were dissolved in water, bacteria pelleted and DNA extracted followed by a Mycobacterium-specific quantitative Polymerase Chain Reaction (qPCR).The results showed that 3D printed PVA matrices are very effective to capture the bacteria. 3D printed PVA matrix and gelatine filters yielded results of the same order of magnitude for mycobacterial analyses, however, PVA matrix offers several advantages over the latter material. 3D printed PVA is considered as an economic and time-effective matrix as it is cheaper than gelatine filters. PVA is sufficiently robust to be handled and loaded into the surgical masks for sampling, compared to the brittle gelatine filters that required supportive frames. PVA is a synthetic material and it is suitable for DNA-based analyses, whilst gelatine is derived from animal collagen, and carries a high bacterial DNA background that interferes with the target DNA analysis. Furthermore, PVA dissolves in distilled water without requiring chemicals or enzymes, such as the case for gelatine hydrolysis. To summarise, 3D printed PVA sampling matrix is considered a promising tool used for microbiological diagnostic purposes.

Mechanical properties of 3-D printed polyvinyl alcohol matrix for detection of respiratory pathogens.

Polyvinyl alcohol is used to 3D print (fused deposition modelling) sampling matrices for bacterial detection. A specific configuration was designed using Computer-Aided Design software. The mechanical properties of the printed samples were studied using uniaxial tensile testing, and compared to those of the original Polyvinyl alcohol filament, with and without heat treatment. The effects of different factors such as UV treatment, printing speed, infill density and printing direction on the mechanical properties of the printed samples including strength, strain and modulus of elasticity were studied. The results show that the effect of the fused deposition modelling process on the mechanical properties of the printed Polyvinyl alcohol cannot be explained by its exposure to heat. UV treatment reduced the strength, characteristic strains and Young's modulus. It makes Polyvinyl alcohol samples brittle. The effects of printing speed and the infill density on the mechanical properties of printed samples can be no linear. An unexpected relation between printing direction and mechanical properties was demonstrated by the studied specimens that needs further theoretical understanding. There is a huge scatter in strength of PVA samples compared with typical engineering materials, and in the fracture strain of original PVA filament, the 3D printing process can reduce the scatter but only by a limited extent. To summarise, there is a sophisticated relation between printing parameters and the mechanical properties of the printed Polyvinyl alcohol.

Exhaled Mycobacterium tuberculosis output and detection of subclinical disease by face-mask sampling: prospective observational studies.

BACKGROUND: Tuberculosis remains a global health challenge, with early diagnosis key to its reduction. Face-mask sampling detects exhaled Mycobacterium tuberculosis. We aimed to investigate bacillary output from patients with pulmonary tuberculosis and to assess the potential of face-mask sampling as a diagnostic method in active case-finding. METHODS: We did a 24-h longitudinal study in patients from three hospitals in Pretoria, South Africa, with microbiologically confirmed pulmonary tuberculosis. Patients underwent 1 h of face-mask sampling eight times over a 24-h period, with contemporaneous sputum sampling. M tuberculosis was detected by quantitative PCR. We also did an active case-finding pilot study in inhabitants of an informal settlement near Pretoria. We enrolled individuals with symptoms of tuberculosis on the WHO screening questionnaire. Participants provided sputum and face-mask samples that were tested with the molecular assay Xpert MTB/RIF Ultra. Sputum-negative and face-mask-positive individuals were followed up prospectively for 20 weeks by bronchoscopy, PET-CT, and further sputum analysis to validate the diagnosis. FINDINGS: Between Sept 22, 2015, and Dec 3, 2015, 78 patients with pulmonary tuberculosis were screened for the longitudinal study, of whom 24 completed the study (20 had HIV co-infection). M tuberculosis was detected in 166 (86%) of 192 face-mask samples and 38 (21%) of 184 assessable sputum samples obtained over a 24-h period. Exhaled M tuberculosis output showed no diurnal pattern and did not associate with cough frequency, sputum bacillary content, or chest radiographic disease severity. On May 16, 2018, 45 individuals were screened for the prospective active case-finding pilot study, of whom 20 had tuberculosis symptoms and were willing to take part. Eight participants were diagnosed prospectively with pulmonary tuberculosis, of whom six were exclusively face-mask positive at screening. Four of these participants (three of whom were HIV-positive) had normal findings on chest radiography but had treatment-responsive early tuberculosis-compatible lesions on PET-CT scans, with Xpert-positive sputum samples after 6 weeks. INTERPRETATION: Face-mask sampling offers a highly efficient and non-invasive method for detecting exhaled M tuberculosis, informing the presence of active infection both with greater consistency and at an earlier disease stage than with sputum samples. The approach shows potential for diagnosis and screening, particularly in difficult-to-reach communities. FUNDING: Wellcome Trust, CARA (Council for At-Risk Academics), University of Leicester, the UK Medical Research Council, and the National Institute for Health Research. VIDEO ABSTRACT.