Conformity Experiment on Inelastic Scattering Exponent of Electrons in Two Dimensions.

The quantum Hall (QH) effect is one of the most widely studied physical phenomenon in two dimensions. The plateau-plateau transition within this effect can be comprehensively described by the scaling theory, which encompasses three pivotal exponents: the critical exponent κ, the inelastic scattering exponent p, and the universal exponent γ. Prior studies have focused on measuring κ and estimating γ, assuming a constant p value of 2 across magnetic fields. Here, our work marks a significant advancement by measuring all three exponents within a single graphene device and a conventional two-dimensional electron system. This study uniquely determines p at low magnetic fields (weak localization region and well outside the QH regime) and high magnetic fields (in the vicinity of the QH regime). Employing a comprehensive analytical approach that includes weak localization, plateau-plateau transitions, and variable range hopping, we have directly determined κ, p, and γ. Our findings reveal a distinct variation in p, shifting from 1 in the low magnetic field regime to 2 in the QH regime in graphene.

High histamine levels are associated with acute-on-chronic liver failure and liver-related death in patients with advanced chronic liver disease.

BACKGROUND AND AIMS: The role of histamine in advanced chronic liver disease (ACLD) is poorly understood. We investigated plasma histamine levels across ACLD stages and their prognostic value. METHODS: We included patients with evidence of ACLD, defined by portal hypertension (hepatic venous pressure gradient [HVPG] ≥6 mmHg) and/or a liver stiffness measurement by transient elastography ≥10 kPa, who underwent HVPG measurement between 2017 and 2020. Acute-on-chronic liver failure (ACLF) and/or liver-related death were defined as composite endpoint. RESULTS: Of 251 patients, 82.5% had clinically significant portal hypertension (median HVPG: 17 mmHg [interquartile range (IQR) 12-21]) and 135 patients (53.8%) were decompensated at baseline. Median plasma histamine was 8.5 nmol/L (IQR: 6.4-11.5), 37.1% of patients showed elevated values (>9.9 nmol/L). Histamine levels did not differ significantly across Child-Turcotte-Pugh (CTP) stages nor strata of model for end-stage liver disease (MELD) or HVPG. Histamine levels correlated with markers of circulatory dysfunction (i.e. sodium, renin and aldosterone). During a median follow-up of 29.2 months, 68 patients developed ACLF or liver-related death. In univariate as well as in multivariate analysis (adjusting for age, sex, HVPG as well as either MELD, clinical stage, and serum albumin or CTP and serum sodium), elevated histamine levels remained associated with the composite endpoint. CTP-based multivariate model adjusted sub-distribution hazard ratio (asHR): 1.010 (95% CI: 1.004-1.021), p < .001; MELD-based multivariate model asHR: 1.030 (95% CI: 1.017-1.040), p < .001. CONCLUSION: High levels of histamine were linked to circulatory dysfunction in ACLD patients and independently associated with increased risks of ACLF or liver-related death. Further mechanistic studies on the link between histamine signalling and development of hyperdynamic circulation and ACLF are warranted.

High repetition-rate dual-channel X-ray spectrometer for high-intensity laser-plasma experiments.

We describe the development and demonstration of a high-repetition-rate-capable dual-channel (DC) x-ray spectrometer designed for high-intensity laser-plasma experiments (≥1×1021 W/cm2). The spectrometer, which operates at high repetition rates, is limited only by the refresh rate of targets and the camera's frame rate. It features two channels, each equipped with a flat highly oriented pyrolytic graphite (HOPG) crystal and a unique detector plane, allowing it to resolve two distinct x-ray bands: approximately 7-10 and 10-13 keV. Each detector plate carrier holds two slots for active (scintillators) or passive (imaging plates) x-ray detectors. We present the design and testing of the HR-DC-HOPG using both the COMET laser (10 J, 0.5 ps shot/4 min) at LLNL's Jupiter Laser Facility and the SCARLET laser (10 J, 30 fs shot/min) at Ohio State University. The results demonstrate the spectrometer's performance across various laser energies, target materials, pulse shapes, and detector types.

Bright ultra-broadband fiber-based biphoton source.

In this Letter, we report a first, to the best of our knoqledge, experimental realization of a bright ultra-broadband (180 THz) fiber-based biphoton source with widely spectrally separated signal and idler photons. Such a two-photon source is realized due to the joint use of a broadband two-loop phase-matching of interacting light waves and high optical nonlinearity of a silica-core photonic crystal fiber. The high performance of the developed fiber source identifies it as an important and useful tool for a wide range of optical quantum applications.

Atomistic insights from DFT calculations into the catalytic properties on ceria-lanthanum clusters for methane activation.

Improving the catalytic performance of materials based on cerium oxide (CeO2) for the activation of methane (CH4) can be achieved through the following strategies: mixture of CeO2 with different oxides (e.g., CeO2-La2O3) and the use of particles with different sizes. In this study, we present a theoretical investigation of the initial CH4 dehydrogenation on (La2Ce2O7)n clusters, where n = 2, 4, and 6. Our framework relies on density functional theory calculations combined with the unity bond index-quadratic exponential potential approximation. Our results indicate that chemical species arising from the first dehydrogenation of CH4, that is, CH3 and H, bind through the formation of C-O and H-O bonds with the clusters, respectively. The coordination of the adsorption site and the chemical environment plays a crucial role in the magnitude of the adsorption energy; for example, species adsorb more strongly in the low-coordinated topO sites located close to the La atoms. Thus, it affects the activation energy barrier, which tends to be lower in configurations where the adsorption of the chemical species is stronger. During CH4 dehydrogenation, the CH3 radical can be present in a planar or tetrahedral configuration. Its conformation changes as a function of the charge transference between the molecule and the cluster, which depends on the CH3-cluster distance. Finally, we analyze the effects of the Hubbard effective parameter (Ueff) on adsorption properties, as the magnitude of localization of Ce f-states affects the hybridization of the interaction between the molecule and the clusters and hence the magnitude of the adsorption energies. We obtained a linear decrease in the adsorption energies by increasing the Ueff parameter; however, the activation energy is only slightly affected.

Anticipating Tomorrow: Tailoring Parkinson's Symptomatic Therapy Using Predictors of Outcome.

BACKGROUND: Although research into Parkinson's disease (PD) subtypes and outcome predictions has continued to advance, recommendations for using outcome prediction to guide current treatment decisions remain sparse. OBJECTIVES: To provide expert opinion-based recommendations for individually tailored PD symptomatic treatment based on knowledge of risk prediction and subtypes. METHODS: Using a modified Delphi approach, members of the Movement Disorders Society (MDS) Task Force on PD subtypes generated a series of general recommendations around the question: "Using what you know about genetic/biological/clinical subtypes (or any individual-level predictors of outcome), what advice would you give for selecting symptomatic treatments for an individual patient now, based on what their subtype or individual characteristics predict about their future disease course?" After four iterations and revisions, those recommendations with over 75% endorsement were adopted. RESULTS: A total of 19 recommendations were endorsed by a group of 13 panelists. The recommendations primarily centered around two themes: (1) incorporating future risk of cognitive impairment into current treatment plans; and (2) identifying future symptom clusters that might be forestalled with a single medication. CONCLUSIONS: These recommendations provide clinicians with a framework for integrating future outcomes into patient-specific treatment choices. They are not prescriptive guidelines, but adaptable suggestions, which should be tailored to each individual. They are to be considered as a first step of a process that will continue to evolve as additional stakeholders provide new insights and as new information becomes available. As individualized risk prediction advances, the path to better tailored treatment regimens will become clearer.

Theoretical investigation of (La4O6)n, (La2Ce2O7)n, and (Ce4O8)n nanoclusters (n = 10, 18): Temperature effects and O-vacancy formation.

We report a theoretical investigation of temperature, size, and composition effects on the structural, energetic, and electronic properties of the (La4O6)n, (La2Ce2O7)n, and (Ce4O8)n nanoclusters (NCs) for n = 10, 18. Furthermore, we investigated the single O vacancy formation energy as a function of the geometric location within the NC. Our calculations are based on the combination of force-field molecular dynamics (MD) simulations and density functional theory calculations. We identified a phase transition from disordered to ordered structures for all NCs via MD simulations and structural analysis, e.g., radius changes, radial distribution function, common neighbor analysis, etc. The transition is sharp for La36Ce36O126, La20Ce20O70, and Ce72O144 due to the crystalline domains in the core and less abrupt for Ce40O80, La40O60, and La72O108. As expected, radius changes are abrupt at the transition temperature, as are morphological differences between NCs located below and above the transition temperature. We found a strong dependence on the O vacancy formation energy (Evac) and its location within the NCs. For example, for La40O60, Evac decreases almost linearly as the distance from the geometric center increases; however, the same trend was not observed for Ce40O80, while there are large deviations from the linear trend for La20Ce20O70. Evac has smaller values for Ce40O80 and higher values for La40O60, that is, almost three times, while Evac has intermediate values for mixed oxides, as expected from weighted averages. Therefore, the mixture of one formula unit of La2O3 with two formula units of CeO2 has the effect of increasing the stability of CeO2 (binding energy), which increases the magnitude of the formation energy of the O vacancy.

Selective Induction of Molecular Assembly to Tissue-Level Anisotropy on Peptide-Based Optoelectronic Cardiac Biointerfaces.

The conduction efficiency of ions in excitable tissues and of charged species in organic conjugated materials both benefit from having ordered domains and anisotropic pathways. In this study, a photocurrent-generating cardiac biointerface is presented, particularly for investigating the sensitivity of cardiomyocytes to geometrically comply to biomacromolecular cues differentially assembled on a conductive nanogrooved substrate. Through a polymeric surface-templated approach, photoconductive substrates with symmetric peptide-quaterthiophene (4T)-peptide units assembled as 1D nanostructures on nanoimprinted polyalkylthiophene (P3HT) surface are developed. The 4T-based peptides studied here can form 1D nanostructures on prepatterned polyalkylthiophene substrates, as directed by hydrogen bonding, aromatic interactions between 4T and P3HT, and physical confinement on the nanogrooves. It is observed that smaller 4T-peptide units that can achieve a higher degree of assembly order within the polymeric templates serve as a more efficient driver of cardiac cytoskeletal anisotropy than merely presenting aligned -RGD bioadhesive epitopes on a nanotopographic surface. These results unravel some insights on how cardiomyocytes perceive submicrometer dimensionality, local molecular order, and characteristics of surface cues in their immediate environment. Overall, the work offers a cardiac patterning platform that presents the possibility of a gene modification-free cardiac photostimulation approach while controlling the conduction directionality of the biotic and abiotic components.

Sub-Diffraction Correlation of Quantum Emitters and Local Strain Fields in Strain-Engineered WSe2 Monolayers.

Strain-engineering in atomically thin metal dichalcogenides is a useful method for realizing single-photon emitters (SPEs) for quantum technologies. Correlating SPE position with local strain topography is challenging due to localization inaccuracies from the diffraction limit. Currently, SPEs are assumed to be positioned at the highest strained location and are typically identified by randomly screening narrow-linewidth emitters, of which only a few are spectrally pure. In this work, hyperspectral quantum emitter localization microscopy is used to locate 33 SPEs in nanoparticle-strained WSe2 monolayers with sub-diffraction-limit resolution (≈30 nm) and correlate their positions with the underlying strain field via image registration. In this system, spectrally pure emitters are not concentrated at the highest strain location due to spectral contamination; instead, isolable SPEs are distributed away from points of peak strain with an average displacement of 240 nm. These observations point toward a need for a change in the design rules for strain-engineered SPEs and constitute a key step toward realizing next-generation quantum optical architectures.

Achievement of Target Gain Larger than Unity in an Inertial Fusion Experiment.

On December 5, 2022, an indirect drive fusion implosion on the National Ignition Facility (NIF) achieved a target gain G_{target} of 1.5. This is the first laboratory demonstration of exceeding "scientific breakeven" (or G_{target}>1) where 2.05 MJ of 351 nm laser light produced 3.1 MJ of total fusion yield, a result which significantly exceeds the Lawson criterion for fusion ignition as reported in a previous NIF implosion [H. Abu-Shawareb et al. (Indirect Drive ICF Collaboration), Phys. Rev. Lett. 129, 075001 (2022)PRLTAO0031-900710.1103/PhysRevLett.129.075001]. This achievement is the culmination of more than five decades of research and gives proof that laboratory fusion, based on fundamental physics principles, is possible. This Letter reports on the target, laser, design, and experimental advancements that led to this result.

Transitioning from Subtyping to Precision Medicine in Parkinson's Disease: A Purpose-Driven Approach.

The International Parkinson and Movement Disorder Society (MDS) created a task force (TF) to provide a critical overview of the Parkinson's disease (PD) subtyping field and develop a guidance on future research in PD subtypes. Based on a literature review, we previously concluded that PD subtyping requires an ultimate alignment with principles of precision medicine, and consequently novel approaches were needed to describe heterogeneity at the individual patient level. In this manuscript, we present a novel purpose-driven framework for subtype research as a guidance to clinicians and researchers when proposing to develop, evaluate, or use PD subtypes. Using a formal consensus methodology, we determined that the key purposes of PD subtyping are: (1) to predict disease progression, for both the development of therapies (use in clinical trials) and prognosis counseling, (2) to predict response to treatments, and (3) to identify therapeutic targets for disease modification. For each purpose, we describe the desired product and the research required for its development. Given the current state of knowledge and data resources, we see purpose-driven subtyping as a pragmatic and necessary step on the way to precision medicine. © 2024 The Authors. Movement Disorders published by Wiley Periodicals LLC on behalf of International Parkinson and Movement Disorder Society.

One-pot Synthesis and Photophysical Studies of Α-cycloamino-substituted 5-aryl-2,2'-bipyridines.

A series of α-cycloamine substituted 2,2'-bipyridines 3ae'-3ce' was obtained via the one-pot approach based on ipso-substitution of a cyano-group in 1,2,4-triazines, followed by aza-Diels-Alder reaction in good yields. Photophysical properties, including fluorosolvatochromism, were studied for 3ae'-3ce' and were compared with α-unsubstituted 2,2'-bipyridines. In addition, dipole moments differences in ground and excited states were calculated by both Lippert-Mataga equation and DFT studies and were compared to each other. The correlation between the size of cycloamine unit and the dipole moments differences value (based on Lippert-Mataga equation) was observed. In addition charge transfer indices (DCT, Λ, H and t) were calculated to demonstrate influence of molecular structure on the intramolecular charge transfer degree.

Perspectives of Implementation of Closed-Loop Deep Brain Stimulation: From Neurological to Psychiatric Disorders.

BACKGROUND: Deep brain stimulation (DBS) is a highly efficient, evidence-based therapy to alleviate symptoms and improve quality of life in movement disorders such as Parkinson's disease, essential tremor, and dystonia, which is also being applied in several psychiatric disorders, such as obsessive-compulsive disorder and depression, when they are otherwise resistant to therapy. SUMMARY: At present, DBS is clinically applied in the so-called open-loop approach, with fixed stimulation parameters, irrespective of the patients' clinical state(s). This approach ignores the brain states or feedback from the central nervous system or peripheral recordings, thus potentially limiting its efficacy and inducing side effects by stimulation of the targeted networks below or above the therapeutic level. KEY MESSAGES: The currently emerging closed-loop (CL) approaches are designed to adapt stimulation parameters to the electrophysiological surrogates of disease symptoms and states. CL-DBS paves the way for adaptive personalized DBS protocols. This review elaborates on the perspectives of the CL technology and discusses its opportunities as well as its potential pitfalls for both clinical and research use in neuropsychiatric disorders.

Deep Brain Stimulation for Obsessive-Compulsive Disorder: Optimal Stimulation Sites.

BACKGROUND: Deep brain stimulation (DBS) is a promising treatment option for treatment-refractory obsessive-compulsive disorder (OCD). Several stimulation targets have been used, mostly in and around the anterior limb of the internal capsule and ventral striatum. However, the precise target within this region remains a matter of debate. METHODS: Here, we retrospectively studied a multicenter cohort of 82 patients with OCD who underwent DBS of the ventral capsule/ventral striatum and mapped optimal stimulation sites in this region. RESULTS: DBS sweet-spot mapping performed on a discovery set of 58 patients revealed 2 optimal stimulation sites associated with improvements on the Yale-Brown Obsessive Compulsive Scale, one in the anterior limb of the internal capsule that overlapped with a previously identified OCD-DBS response tract and one in the region of the inferior thalamic peduncle and bed nucleus of the stria terminalis. Critically, the nucleus accumbens proper and anterior commissure were associated with beneficial but suboptimal clinical improvements. Moreover, overlap with the resulting sweet- and sour-spots significantly estimated variance in outcomes in an independent cohort of 22 patients from 2 additional DBS centers. Finally, beyond obsessive-compulsive symptoms, stimulation of the anterior site was associated with optimal outcomes for both depression and anxiety, while the posterior site was only associated with improvements in depression. CONCLUSIONS: Our results suggest how to refine targeting of DBS in OCD and may be helpful in guiding DBS programming in existing patients.

Flexible tape-drive target system for secondary high-intensity laser-driven sources.

We present the development of a flexible tape-drive target system to generate and control secondary high-intensity laser-plasma sources. Its adjustable design permits the generation of relativistic MeV particles and x rays at high-intensity (i.e., ≥1 × 1018 W cm-2) laser facilities, at high repetition rates (>1 Hz). The compact and robust structure shows good mechanical stability and a high target placement accuracy (<4 µm RMS). Its compact and flexible design allows for mounting in both the horizontal and vertical planes, which makes it practical for use in cluttered laser-plasma experimental setups. The design permits ∼170° of access on the laser-driver side and 120° of diagnostic access at the rear. A range of adapted apertures have been designed and tested to be easily implemented to the targetry system. The design and performance testing of the tape-drive system in the context of two experiments performed at the COMET laser facility at the Lawrence Livermore National Laboratory and at the Advanced Lasers and Extreme Photonics (ALEPH) facility at Colorado State University are discussed. Experimental data showing that the designed prototype is also able to both generate and focus high-intensity laser-driven protons at high repetition rates are also presented.

Mechanosynthesis of Polyureas and Studies of Their Responses to Anions.

Polyureas (PUs) have already found wide practical applications, and various methods of their synthesis have been reported. In this manuscript, we wished to report the very first mechanochemical approach towards aromatic PUs via reactions between isomeric 2,2'-, 3,3'-, and 4,4'-diaminobiphenyls and triphosgene under solvent-free conditions following ball-milling. By using this synthetic approach, both PUs and azomethine-capped Pus were obtained. The fluorescence response of the above-mentioned PUs towards various anions in solutions were studied and selective fluorescence responses towards the hydroxyl and fluoride anions were observed.

Graphene-Based Analog of Single-Slit Electron Diffraction.

This work reports the experimental demonstration of single-slit diffraction exhibited by electrons propagating in encapsulated graphene with an effective de Broglie wavelength corresponding to their attributes as massless Dirac fermions. Nanometer-scale device designs were implemented to fabricate a single-slit followed by five detector paths. Predictive calculations were also utilized to readily understand the observations reported. These calculations required the modeling of wave propagation in ideal case scenarios of the reported device designs to more accurately describe the observed single-slit phenomenon. This experiment was performed at room temperature and 190 K, where data from the latter highlighted the exaggerated asymmetry between electrons and holes, recently ascribed to slightly different Fermi velocities near the K point. This observation and device concept may be used for building diffraction switches with versatile applicability.

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives.

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.

Description of three new species of Benedictus (Coleoptera, Chrysomelidae, Galerucinae, Alticini) from China, with comments on their biology and modified ethanol traps for collecting flea beetles.

The diversity and biology of the moss and leaf litter-inhabiting flea beetles are still poorly known. In this study, three new species of Benedictus are described from China: Benedictusfuanensis Ruan & Konstantinov, sp. nov., Benedictusquadrimaculatus Ruan & Konstantinov, sp. nov., and Benedictuswangi Ruan & Konstantinov, sp. nov. Comments on their biology are given. Benedictusquadrimaculatus has a highly unusual morphological feature not reported before in flea beetles: black spots on the abdominal tergites that are visible through the elytra. Traditional and modified ethanol traps were tested and proven useful for collecting leaf litter- and moss-inhabiting flea beetles. Based on our tests, eight traps could collect one specimen each day in the testing sites in Fujian Province; three traps could collect one specimen each day in the testing sites in Guangdong Province.