Dental biomaterials redefined: molecular docking and dynamics-driven dental resin composite optimization.

BACKGROUND: Dental resin-based composites are widely recognized for their aesthetic appeal and adhesive properties, which make them integral to modern restorative dentistry. Despite their advantages, adhesion and biomechanical performance challenges persist, necessitating innovative strategies for improvement. This study addressed the challenges associated with adhesion and biomechanical properties in dental resin-based composites by employing molecular docking and dynamics simulation. METHODS: Molecular docking assesses the binding energies and provides valuable insights into the interactions between monomers, fillers, and coupling agents. This investigation prioritizes SiO2 and TRIS, considering their consistent influence. Molecular dynamics simulations, executed with the Forcite module and COMPASS II force field, extend the analysis to the mechanical properties of dental composite complexes. The simulations encompassed energy minimization, controlled NVT and NPT ensemble simulations, and equilibration stages. Notably, the molecular dynamics simulations spanned a duration of 50 ns. RESULTS: SiO2 and TRIS consistently emerged as influential components, showcasing their versatility in promoting solid interactions. A correlation matrix underscores the significant roles of van der Waals and desolvation energies in determining the overall binding energy. Molecular dynamics simulations provide in-depth insights into the mechanical properties of dental composite complexes. HEMA-SiO2-TRIS excelled in stiffness, BisGMA-SiO2-TRIS prevailed in terms of flexural strength, and EBPADMA-SiO2-TRIS offered a balanced combination of mechanical properties. CONCLUSION: These findings provide valuable insights into optimizing dental composites tailored to diverse clinical requirements. While EBPADMA-SiO2-TRIS demonstrates distinct strengths, this study emphasizes the need for further research. Future investigations should validate the computational findings experimentally and assess the material's response to dynamic environmental factors.

Evaluation of the effect of chemical disinfection and ultraviolet disinfection on the dimensional stability of polyether impression material: an in-vitro study.

BACKGROUND: Various methods, chemical and physical, disinfect dental impressions. Common chemicals include 1% Sodium Hypochlorite and 2% glutaraldehyde, while UV radiation is a prevalent physical method. Few studies compare their effects on dimensional stability in polyether impressions. This study aims to assess such stability using different disinfection methods. Therefore, this study was planned to evaluate the dimensional stability of polyether impression material using different disinfection methods. METHODS: This in vitro study compared the effects of chemical disinfectants (1% Sodium Hypochlorite and 2% glutaraldehyde) and UV irradiation on the dimensional stability of polyether impression material. Groups A, B, C, and D, each with ten samples (N = 10), were studied. Group A was untreated (control). Group B was treated with 2% glutaraldehyde for 20 min, Group C with 1% Sodium Hypochlorite for 20 min, and Group D with UV rays for 20 min. A pilot milling machine drill was used to make four parallel holes labeled A, B, C, and D in the anterior and premolar regions from right to left. After sequential drilling, four implant analogs were positioned using a surveyor for accuracy. Ten open-tray polyether impressions were made and treated as described in the groups, followed by pouring the corresponding casts. Distortion values for each disinfection method were measured using a coordinate measuring machine capable of recording on the X- and Y-axes. RESULTS: A comprehensive analysis was conducted using the one-way ANOVA test for distinct groups labeled A, B, C, and D, revealing significant differences in the mean distances for X1, X2, X4, X5, and X6 among the groups, with p-values ranging from 0.001 to 0.000. However, no significant differences were observed in X3. Notably, mean distances for the Y variables exhibited substantial differences among the groups, emphasizing parameter variations, with p-values ranging from 0.000 to 0.033. The results compared the four groups using the one-way ANOVA test, revealing statistically significant distance differences for most X and Y variables, except for X3 and Y4. Similarly, post-hoc Tukey's tests provided specific pairwise comparisons, underlining the distinctions between group C and the others in the mean and deviation distances for various variables on both the X- and Y-axes. CONCLUSIONS: This study found that disinfection with 1% sodium hypochlorite or UV rays for 20 min maintained dimensional stability in polyether impressions.

Relationships between perception of black triangles appearance, personality factors and level of education.

This analytical cross-sectional study evaluated the perception of black triangles (BT) and examined the relationships between the perception of BT, personality factors, different educational backgrounds and demographic factors. 435 participants were included and divided into four groups: dentists, clinical (4th and 5th year) dental students, pre-clinical (3rd year) dental students, and laypeople. Participants' perception of the attractiveness of smile profiles of maxillary and mandibular anterior dentition with BT was rated using a ten-point VAS scale with 0 being the least, and 10 being the most attractive smile profile. The personality was assessed using the NEO-FFI personality questionnaire. The smile profile with multiple large BT was rated the least attractive for the maxillary (mean = 3.6) and mandibular (mean = 3.9) tested profiles. The smile profile without BT was rated the most attractive for the maxillary (mean = 9.1) and mandibular (mean = 8.8) tested profiles. The dental professionals perceived the maxillary smile profile with multiple large BT as less attractive than the non-dental participants (t = - 2.715, P = 0.007). Being a male, having dental education, having lower Neuroticism scores, as well as having higher Openness, Agreeableness, Conscientiousness, and Extraversion scores predicted and contributed more towards perceiving various tested smile profiles as more attractive. These findings show that black triangles negatively impacts the perception of smile attractiveness, and that personality traits and having dental education impact the perception of smile attractiveness for smiles with black triangles.

Properties of a novel composite elastomeric polymer vinyl polyether siloxane in comparison to its parent materials: a systemic review and meta-analysis.

BACKGROUND: The effectiveness of newly developed elastomeric polymer hybrid siloxane (PVES), which combines the properties of polyethylene (PE) and polyvinyl siloxane (PVS) elastomers, has been a subject of interest in recent studies. This study aimed to assess the physical properties of hybrid PVES materials by analyzing existing data from recent studies on this topic. METHODS: A systematic literature search was conducted to retrieve peer-reviewed articles published up to February 5, 2023. The population, intervention, comparison, and pertinent outcomes were specified under the PICO framework. The primary data analysis was performed in Microsoft Excel, while statistical analysis used Meta-Essentials. RESULTS: Of the 1152 articles assessed, 14 met the inclusion criteria. The meta-analysis of the selected studies indicated that polyether (PE) and polyvinyl siloxane (PVS) were highly correlated (two-tailed p-values of 0.000 and 0.001, respectively) with the improved tensile strength of vinyl polyether siloxane (PVES) with a significantly positive effect size. Similarly, the hydrophilic characteristics of PVES were significantly improved compared to those of PE and PVS. PE was a significant contributor to the hydrophilic characteristics of PVES, with a two-tailed p-value of 0.000. The effect size was highly positive for hydrophilicity but showed high heterogeneity. It was also observed that the dimensional accuracy of PVES was comparable to those of PE and PVS, with no statistically significant differences among the three materials. CONCLUSIONS: PVES showed promising features, with improved tensile strength and hydrophilic characteristics compared to those of PE and PVS.

28Assessment of thermal variations in the pulpal chamber during fabrication of provisionals using two different techniques and three materials.

BACKGROUND: The issue of an increase in pulpal temperature affects direct and indirect techniques, where the fabricating material will come in direct contact with the prepared teeth. OBJECTIVE: The aim of this study was to assess the pulpal thermal variations during provisional fabrication using direct and indirect-direct techniques, with three commonly commercially available provisional fabricating materials. METHOD: In this vitro analytical study, 120 extracted human teeth were placed in a dentulous mould and dental stone was poured, to create a working model with an embedded natural right maxillary central incisor. Recording of thermal changes in the pulp chamber during provisionalization with direct (technique 1) and indirect-direct (technique 2) using three common types of provisional crown materials. 120 provisional crowns were fabricated using polymethyl methacrylate (DPI) (Group 1), Bis-acryl composite (Protemp 4) (Group 2) and Visible-light polymerizing (VLP) Urethane Dimethacrylate (Revotek LC) (Group 3) by two techniques and recording of peak temperature changes were done. Temperature rise in the pulp chamber was recorded using a thermocouple. RESULTS: The mean initial and final temperature of the pulp chamber recorded for Groups 1, 2 and 3 was 31.52, 32.56; 31.01, 32.34; 32.29, 34.47 for technique 1 and 29.13, 30.5; 29.29, 31.11; 30.31, 32.65 for technique 2. The mean change in temperature was higher in Group 3 compared to the other groups. CONCLUSION: The temperature rise detected according to this study was within the safer pulpal health limits with all the investigated materials and techniques. The resin material recommended for clinical use when the direct technique is employed for the fabrication of provisional crowns is bis-acryl composite resin (Protemp-4) as it caused minimal temperature rise in the pulpal chamber.

Comparative evaluation of open tray impression technique: investigating the precision of four splinting materials in multiple implants.

BACKGROUND: This study aimed to determine the relative positioning accuracy of multiple implants utilizing four distinct types of splinting materials. METHODS: The purpose of this in-vitro study was to compare the precision of four splinting materials in an open tray impression technique in multiple implant situations. Based on the material used for splinting, four groups were made (n = 40)- Group A: Conventional Method, Group B: Prefabricated Pattern Resin Framework, Group C: Prefabricated Metal Framework, Group D: Light Cured Pattern Resin, these groups were compared with the master model. A heat-cured clear acrylic resin and a master model were constructed. A pilot milling machine drill was used to drill four parallel holes in the anterior and premolar regions, which were later labeled as A, B, C, and D positions from right to left. Then, sequential drilling was carried out, and four 3.75­mm diameter and 13-mm long ADIN implant analogs with internal hex were placed in the acrylic model using a surveyor for proper orientation. The impression posts were then manually screwed to the implant analogs using an open tray, and they were secured to the implants using 10 mm flat head guide pins with a 15 N.cm torque. 10 Open tray polyether impressions were made, and casts were poured. Each splinting method's distortion values were measured using a coordinate measuring machine capable of recordings in the X-, Y-, and Z-axes. Comparison of mean distances for X1, X2, and X3 was made using the Kruskal-Wallis test, and Pairwise comparison was done using Post Hoc Tukey's Test. RESULTS: The differences between the groups were significant when assessing the distances X1, X2, and X3 (p < 0.05). The comparison of deviations between the groups revealed a statistically significant difference (p < 0.05) for the deviation distance X3 but not for the deviation distances X1 and X2. For distance Y1, the difference between the groups was statistically significant (p0.05), but it was not significant for distances Y2 and Y3. A statistically significant difference was seen in the comparison between the groups (p < 0.05) for the deviation distances Y1, Y2, and Y3. The results were statistically significant for the distance Z1 comparisons, namely, control vs. Group A (p = 0.012), control vs. Group B (p = 0.049), control vs. Group C (p = 0.048), and control vs. Group D (p = 0.021), and for distance Z3 comparison for control vs. Group A (p = 0.033). The results were statistically insignificant for the distance Z2 comparisons (p > 0.05). CONCLUSIONS: All splinting materials produced master casts with measurements in close proximity to the reference model. However, prefabricated pattern resin bars splinting showed the highest accuracy among the studied techniques. The most recent splinting techniques using prefabricated metal framework and light-cure pattern resin showed similar accuracy.

Prevalence of temporomandibular disorders among psychoactive substances abusers: A systematic review and meta-analysis.

INTRODUCTION: The COVID-19 pandemic has had a significant impact on substance abuse patterns in recent times. Many people have experienced increased stress, anxiety, and social isolation, which has led to higher rates of substance abuse and addiction. It impacts on the orofacial region, particularly temporomandibular joint (TMJ). This review was undertaken to assess the association between substance abuse and temporomandibular disorders. (TMDs). MATERIALS AND METHODS: The databases of PubMed, Google Scholar, Web of Science and Cochrane were searched for articles based of set PECO criteria. A comprehensive search using keywords of "Psychoactive substances", "Illegal substances", "substance abuse", "narcotics", "temporomandibular joint" and "temporomandibular joint disorders" yielded a total of 1405 articles. Modified Newcastle-Ottawa Scale for observational studies assessed the risk of bias of included studies. RESULTS: Two studies were reviewed. Samples recruited were either from rehabilitation centres or prisoners and fell in the second to fourth decade. A definite association was noted between psychoactive substance and TMDs. Moderate to low risk of bias was noted in all the studies evaluated. CONCLUSION: Further research is needed to better understand the nature of this relationship and the underlying mechanisms involved. It is important for healthcare providers to be aware of this potential association and to screen for substance abuse in patients with TMD symptoms.

An Investigation of the Fracture Loads Involved in the Framework of Removable Partial Dentures Using Two Types of All-Ceramic Restorations.

Retention and support are needed for removable partial denture stability. The stability can be achieved by clasps, occlusal and cingulum rests on healthy abutment teeth. However, implants or crowns can be used to support the removable partial denture instated on unhealthy abutment teeth. This study was conducted to investigate the fracture strength of two types of all-ceramic restorations used as abutments for the removable partial denture framework. The crowns were manufactured with two types of ceramic materials: zirconia and IPS e.max Press ceramics. The metal alloy (cobalt-chrome) was cast to form the removable partial denture framework. A universal testing machine was used to evaluate the fracture strength of both ceramic crown materials. The results presented no fractures in all-ceramic crowns, but deformation of the partial denture frameworks occurred. With the limitation of this study, it can be concluded that zirconia and IPS e.max Press ceramic can be used as abutments to provide adequate support to the removable partial denture.

Short-term influence of antimicrobial photodynamic therapy as an adjuvant to mechanical debridement in reducing soft-tissue inflammation and subgingival yeasts colonization in patients with peri-implant mucositis.

OBJECTIVE: The objective of this short-term follow-up study was to evaluate the influence of antimicrobial photodynamic therapy (aPDT) as an adjuvant to mechanical debridement (MD) in reducing soft-tissue inflammation and subgingival yeasts colonization (SYC) in patients with peri­implant mucositis (PiM). METHODS: Individuals diagnosed with PiM were included. Demographic data was collected using a questionnaire. Peri-implant plaque index (PI), bleeding index (BI), probing depth (PD), crestal bone levels and SYC were measured at baseline. Therapeutically, these individuals were divided into test and control groups. In the control-group patients underwent MD and in the test-group patients underwent MD with adjunct single session of aPDT. Clinical peri­implant parameters and SYC were reassessed after 12-weeks. Correlation between age, gender and duration of implants with SYC and clinical peri­implant status was assessed using logistic regression models. P < 0.05 was selected as an indicator of statistical significance. RESULTS: The test and control-groups comprised of 24 and 23 individuals, respectively. In the test and control groups, toothbrushing twice daily was reported by 7 (29.2%) and 5 (21.7%) individuals, respectively. None of the individuals had ever used a dental floss. At baseline, there was no difference in peri­implant PI, BI, PD and CBL in the test and control groups. At follow-up, peri­implant PI (P < 0.01), BI (P < 0.01) and PD (P < 0.01) were significantly higher in the control compared with the test-group. At baseline, SYC in the test and control groups were 1865.3 ± 403.4 CFU/ml and 1963.7 ± 512.4 CFU/ml, respectively. At 90 days' follow-up, SYC in the test and control groups were 1472 ± 202.7 and 1538.4 ± 331.7 CFU/ml, respectively. There was no significant difference in SYC in both groups when baseline values were compared with 90 days' follow-up. CONCLUSION: One session of aPDT after MC with adjunct aPDT is effective in reducing soft tissue inflammation but not SYC in patients with PiM.

Surgical Protocols before and after COVID-19-A Narrative Review.

The COVID-19 epidemic has affected not only people's daily lives but also the working methods of clinicians, surgical procedures, open/minimally invasive procedures, operating room management, patient and healthcare worker safety, education and training. The main objective of this study was to review selected articles and determine the changes in the general surgery protocols/procedures before and after the emergence of the COVID-19 pandemic. The literature was carried out in PubMed-Medline, Cochrane Library, Embase, Scopus and Google Scholar. The terms utilised for the searches were "SARS-CoV-2", "Surgery", "COVID-19", "Surgical protocol", "Surgical recommendations" and "before and after". A total of 236 studies were identified, out of which 41 studies were included for data extraction. Significant changes in all the articles were observed with respect to the surgeries done before, during and after the COVID-19 pandemic. Specifically, the number of elective surgeries were considerably fewer in comparison to the pre-pandemic period. Since the COVID-19 pandemic started, hospitals all throughout the world have conducted significantly fewer procedures, particularly elective/non-urgent surgeries.

Influence of Surface Type with Coffee Immersion on Surface Topography and Optical and Mechanical Properties of Selected Ceramic Materials.

BACKGROUND The aim of this study was to assess and compare the effect of surface type (glazed or polished) with coffee immersion and aging on surface topography (Ra), optical properties (TP, OP), and mechanical properties (fracture forces and modes) of zirconia-reinforced lithium silicate (Vita Suprinity), hybrid polymer-infiltrated-feldspathic ceramic network material (Vita Enamic), and leucite-containing feldspathic glass (Vitablocs® Mark II) made by computer-aided design and computer-aided manufactured (CAD/CAM) ceramic materials. MATERIAL AND METHODS Fifty-four specimens were assembled out of the above 3 CAD/CAMs ceramic materials. Each group was divided into glazed or polished surfaces, having 9 specimens of every type and stained in coffee for 15 days. Ra and color of specimens in the form of TP and OP were recorded before and after immersion in staining material. Fracture forces and modes were analyzed after the 90-day aging. Data were analyzed using ANOVA, then post hoc analysis and Bonferroni tests. RESULTS Our study found significant differences in Ra, TP, and Op before and after coffee immersion between glazed and polished specimens, with higher values in the polished surfaces among the 3 ceramic materials. The highest values of fracture resistance were noted in Vita Suprinity, and Vita Enamic had the lowest values, without significant differences among groups. CONCLUSIONS Most of the TP and OP values were in acceptable clinical range, and Vita Suprinity had superior TP than the other groups. Reparable fracture types were observed in Vita Suprinity, whereas semi-reparable and non-reparable were predominant in other groups.